New macros that add FLAGS and FLAGS2 checking were added for
both TRANS and TRANS64.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Luis Pires <luis.pires@eldorado.org.br>
[ferst: - TRANS_FLAGS2 instead of TRANS_FLAGS_E
- Use the new macros in load/store vector insns ]
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Message-Id: <20220225210936.1749575-2-matheus.ferst@eldorado.org.br>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
This patch adds the EBB exception support that are triggered by
Performance Monitor alerts. This happens when a Performance Monitor
alert occurs and MMCR0_EBE, BESCR_PME and BESCR_GE are set.
fire_PMC_interrupt() will execute the raise_ebb_perfm_exception() helper
which will check for MMCR0_EBE, BESCR_PME and BESCR_GE bits. If all bits
are set, do_ebb() will attempt to trigger a PERFM EBB event.
If the EBB facility is enabled in both FSCR and HFSCR we consider that
the EBB is valid and set BESCR_PMEO. After that, if we're running in
problem state, fire a POWERPC_EXCP_PERM_EBB immediately. Otherwise we'll
queue a PPC_INTERRUPT_EBB.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220225101140.1054160-5-danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
PPC_INTERRUPT_EBB is a new interrupt that will be used to deliver EBB
exceptions that had to be postponed because the thread wasn't in problem
state at the time the event-based branch was supposed to occur.
ISA 3.1 also defines two EBB exceptions: Performance Monitor EBB
exception and External EBB exception. They are being added as
POWERPC_EXCP_PERFM_EBB and POWERPC_EXCP_EXTERNAL_EBB.
PPC_INTERRUPT_EBB will check BESCR bits to see the EBB type that
occurred and trigger the appropriate exception. Both exceptions are
doing the same thing in this first implementation: clear BESCR_GE and
enter the branch with env->nip retrieved from SPR_EBBHR.
The checks being done by the interrupt code are msr_pr and BESCR_GE
states. All other checks (EBB facility check, BESCR_PME bit, specific
bits related to the event type) must be done beforehand.
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20220225101140.1054160-4-danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
There are still PMU exclusive bits to handle in fire_PMC_interrupt()
before implementing the EBB support. Let's finalize it now to avoid
dealing with PMU and EBB logic at the same time in the next patches.
fire_PMC_interrupt() will fire an Performance Monitor alert depending on
MMCR0_PMAE. If we are required to freeze the timers (MMCR0_FCECE) we'll
also need to update summaries and delete the existing overflow timers.
In all cases we're going to update the cycle counters.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20220225101140.1054160-3-danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
This is an exclusive TCG helper. Gating it with CONFIG_TCG and changing
meson.build accordingly will prevent problems --disable-tcg and
--disable-linux-user later on.
We're also changing the uses of !kvm_enabled() to tcg_enabled() to avoid
adding "defined(CONFIG_TCG)" ifdefs, since tcg_enabled() will be
defaulted to false with --disable-tcg and the block will always be
skipped.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20220225101140.1054160-2-danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Commit 3f4c369ea6 ("ppc/pnv: make PECs create and realize PHB4s")
changed phb4_pec code to create the default PHB4 objects in
pnv_pec_default_phb_realize(). In this process the stacks[] PEC array was
removed and each PHB4 object is tied together with its PEC via the
phb->pec pointer.
This change also broke the previous QOM hierarchy - the PHB4 objects are
being created and not being parented to their respective chips. This can
be verified by 'info pic' in a powernv9 domain with default settings.
pnv_chip_power9_pic_print_info() will fail to find the PHBs because
object_child_foreach_recursive() won't find any.
The solution is to set the parent chip and the parent bus, in the same
way done for user created PHB4 devices, for all PHB4 devices.
Fixes: 3f4c369ea6 ("ppc/pnv: make PECs create and realize PHB4s")
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20220218202804.413157-1-danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Determine the IRQ number in the same way as for pnv_dt_ipmi_bt(). This
resolves one usage of ISADevice::isairq[] which allows it to be removed
eventually.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220301220037.76555-6-shentey@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
This series of patches does three things.
First, it starts to give up on the idea that you can run FooBSD binaries on
BarBSD. They are too different to make that happen any time soon, though I've
kept the support for Net/OpenBSD, even though they haven't built. We'll need a
lot of work to make that happen, though, and I need to simplify to get things
upstream.
Second, it starts to move some of the ifdef trees into target.h.
Third, it starts to upstream bsd-file.h, but the remainder of the file in the
bsd-user fork had some issues that will be resolved before next quarter's
update.
-----BEGIN PGP SIGNATURE-----
Comment: GPGTools - https://gpgtools.org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=+Jpa
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bsdimp/tags/bsd-user-preen-2022q1-pull-request' into staging
bsd-user: Prepare for future upstream of system calls.
This series of patches does three things.
First, it starts to give up on the idea that you can run FooBSD binaries on
BarBSD. They are too different to make that happen any time soon, though I've
kept the support for Net/OpenBSD, even though they haven't built. We'll need a
lot of work to make that happen, though, and I need to simplify to get things
upstream.
Second, it starts to move some of the ifdef trees into target.h.
Third, it starts to upstream bsd-file.h, but the remainder of the file in the
bsd-user fork had some issues that will be resolved before next quarter's
update.
# gpg: Signature made Mon 28 Feb 2022 18:11:47 GMT
# gpg: using RSA key 2035F894B00AA3CF7CCDE1B76C1CD1287DB01100
# gpg: Good signature from "Warner Losh <wlosh@netflix.com>" [unknown]
# gpg: aka "Warner Losh <imp@bsdimp.com>" [unknown]
# gpg: aka "Warner Losh <imp@freebsd.org>" [unknown]
# gpg: aka "Warner Losh <imp@village.org>" [unknown]
# gpg: aka "Warner Losh <wlosh@bsdimp.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 2035 F894 B00A A3CF 7CCD E1B7 6C1C D128 7DB0 1100
* remotes/bsdimp/tags/bsd-user-preen-2022q1-pull-request:
bsd-user: Add safe system call macros
bsd-user: Define target_arg64
bsd-user: introduce target.h
bsd-user/bsd-file.h: Implementation details for the filesystem calls
bsd-user/freebsd/os-syscall.c: Add get_errno and host_to_target_errno
bsd-user/sycall.c: Now obsolete, remove
bsd-user: Move system call building to os-syscall.c
bsd-user/freebsd/os-syscall.c: Move syscall processing here
bsd-user: Remove bsd_type
bsd-user/x86_64/target_arch_thread.h: Assume a FreeBSD target
bsd-user/arm/target_arch_thread.h: Assume a FreeBSD target
bsd-user/arm/target_arch_cpu.h: Only support FreeBSD sys calls
bsd-user/i386/target_arch_cpu.h: Remove openbsd syscall
bsd-user/x86_64/target_arch_cpu.h: Remove openbsd syscall
bsd-user/x86_64/target_arch_cpu.h: int $80 never was a BSD system call on amd64
bsd-user/main.c: Drop syscall flavor arg -bsd
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* Fix the s390x avocado test with Fedora
* Update the s390x Travis jobs to Focal (instead of Bionic)
* Implement the z15 Misc Instruction Extension 3 Facility
-----BEGIN PGP SIGNATURE-----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=lS9b
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/thuth-gitlab/tags/pull-request-2022-02-28' into staging
* Fix emulation of the SET CLOCK instruction
* Fix the s390x avocado test with Fedora
* Update the s390x Travis jobs to Focal (instead of Bionic)
* Implement the z15 Misc Instruction Extension 3 Facility
# gpg: Signature made Mon 28 Feb 2022 10:34:47 GMT
# gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5
# gpg: issuer "thuth@redhat.com"
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full]
# gpg: aka "Thomas Huth <thuth@redhat.com>" [full]
# gpg: aka "Thomas Huth <huth@tuxfamily.org>" [full]
# gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5
* remotes/thuth-gitlab/tags/pull-request-2022-02-28:
tests/tcg/s390x: Tests for Miscellaneous-Instruction-Extensions Facility 3
s390x/cpumodel: Bump up QEMU model to a stripped-down IBM z15 GA1
s390x/tcg: Implement Miscellaneous-Instruction-Extensions Facility 3 for the s390x
travis.yml: Update the s390x jobs to Ubuntu Focal
tests/avocado/machine_s390_ccw_virtio: Adapt test to new default resolution
s390x: sck: load into a temporary not into in1
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The tcg_out_ldst helper will handle out-of-range offsets.
We haven't actually encountered any, since we haven't run
across the assert within tcg_out_op_rrs, but an out-of-range
offset would not be impossible in future.
Fixes: 6508988918 ("tcg/tci: Change encoding to uint32_t units")
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
In some cases, cpu->exit_request can be false after handling the
interrupt, leading to another TB being executed instead of returning
to the main loop.
Fix this by returning true unconditionally when in single-step mode.
Fixes: ba3c35d9c4 ("tcg/cpu-exec: precise single-stepping after an interrupt")
Signed-off-by: Luc Michel <lmichel@kalray.eu>
Message-Id: <20220214132656.11397-1-lmichel@kalray.eu>
[rth: Unlock iothread mutex; simplify indentation]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The dh_alias redirect is intended to handle TCG types as distinguished
from C types. TCG does not distinguish signed int from unsigned int,
because they are the same size. However, we need to retain this
distinction for dh_typecode, lest we fail to extend abi types properly
for the host call parameters.
This bug was detected when running the 'arm' emulator on an s390
system. The s390 uses TCG_TARGET_EXTEND_ARGS which triggers code
in tcg_gen_callN to extend 32 bit values to 64 bits; the incorrect
sign data in the typemask for each argument caused the values to be
extended as unsigned values.
This simple program exhibits the problem:
static volatile int num = -9;
static volatile int den = -5;
int main(void)
{
int quo = num / den;
printf("num %d den %d quo %d\n", num, den, quo);
exit(0);
}
When run on the broken qemu, this results in:
num -9 den -5 quo 0
The correct result is:
num -9 den -5 quo 1
Fixes: 7319d83a73 ("tcg: Combine dh_is_64bit and dh_is_signed to dh_typecode")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/876
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reported-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Tested-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Tested-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
* Removal of the swift-bmc machine
* New Secure Boot Controller model
* Improvements on the rainier machine
* Various small cleanups
-----BEGIN PGP SIGNATURE-----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=0F2M
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/legoater/tags/pull-aspeed-20220227' into staging
aspeed queue:
* Removal of the swift-bmc machine
* New Secure Boot Controller model
* Improvements on the rainier machine
* Various small cleanups
# gpg: Signature made Sun 27 Feb 2022 08:45:45 GMT
# gpg: using RSA key A0F66548F04895EBFE6B0B6051A343C7CFFBECA1
# gpg: Good signature from "Cédric Le Goater <clg@kaod.org>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: A0F6 6548 F048 95EB FE6B 0B60 51A3 43C7 CFFB ECA1
* remotes/legoater/tags/pull-aspeed-20220227:
aspeed/sdmc: Add trace events
aspeed/smc: Add an address mask on segment registers
aspeed: Introduce a create_pca9552() helper
aspeed: rainier: Add strap values taken from hardware
aspeed: rainier: Add i2c LED devices
ast2600: Add Secure Boot Controller model
arm: Remove swift-bmc machine
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This allows us to check our new SYS_HEAPINFO implementation generates
sane values.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20220225172021.3493923-19-alex.bennee@linaro.org>
The previous numbers were a guess at best and rather arbitrary without
taking into account anything that might be loaded. Instead of using
guesses based on the state of registers implement a new function that:
a) scans the MemoryRegions for the largest RAM block
b) iterates through all "ROM" blobs looking for the biggest gap
The "ROM" blobs include all code loaded via -kernel and the various
-device loader techniques.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Cc: Andrew Strauss <astrauss11@gmail.com>
Cc: Keith Packard <keithp@keithp.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220225172021.3493923-18-alex.bennee@linaro.org>
The previous disabling of threadcount 3bdc19af00 ("tests/tcg/sh4:
disable another unreliable test") just for plugins was being too
conservative. It's all broken so skip it.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220225172021.3493923-17-alex.bennee@linaro.org>
The new s390x machine has more of everything including the OS. As
18.04 will soon be going we might as well get onto something moderately
modern.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Cc: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220225172021.3493923-16-alex.bennee@linaro.org>
QEMU will soon drop the support for Ubuntu 18.04, so let's update
the Travis jobs that were still using this version to 20.04 instead.
While we're at it, also remove an obsolete comment about Ubuntu
Xenial being the default for our Travis jobs.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220221153423.1028465-1-thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220225172021.3493923-15-alex.bennee@linaro.org>
This imports the sha512 algorithm and related tests from ccan which
offers a cleaner hash implementation with its own validation tests
with which we can exercise TCG code generations.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220225172021.3493923-13-alex.bennee@linaro.org>
The aim of this is to test code generation for vectorised operations.
Unfortunately gcc struggles to do much with the messy sha1 code (try
-fopt-info-vec-missed to see why). However it's better than nothing.
We assume the non-vectorised output is gold and baring compiler bugs
the outputs should match.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220225172021.3493923-12-alex.bennee@linaro.org>
Rather than having an else leg for the missing compiler case we can
simply just not add the test - the same way as is done for ppc64le.
Also while we are at it fix up the compiler invocation.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220225172021.3493923-11-alex.bennee@linaro.org>
Although running on aarch64 hardware we can still target 32bit builds
with a cross compiler and run the resulting binaries.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220225172021.3493923-10-alex.bennee@linaro.org>
Some HW can run multiple architecture profiles so we can install a
secondary runner to build and run tests for those profiles. This
allows setting up secondary service.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220225172021.3493923-9-alex.bennee@linaro.org>
At least the current crop of Aarch64 HW can support running 32 bit EL0
code. Before we can build and test we need a minimal set of packages
installed. We can't use "apt build-dep" because it currently gets
confused trying to keep two sets of build-deps installed at once.
Instead we install a minimal set of libraries that will allow us to
continue.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220225172021.3493923-8-alex.bennee@linaro.org>
Cross building QEMU for riscv64 still involves messing about with sid
and ports. However for building tests we can have a slimmer compiler
only container which should be more stable.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220225172021.3493923-7-alex.bennee@linaro.org>
A later compiler is needed for some upcomming tests so we might as
well migrate to an lcitool generated docker file.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Cc: David Hildenbrand <david@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220225172021.3493923-6-alex.bennee@linaro.org>
Using lcitool update debian-arm64-cross to a Debian 11 based system.
As a result we can drop debian-arm64-test-cross just for building
tests.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220225172021.3493923-5-alex.bennee@linaro.org>
We will need an update shortly for some new images.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220225172021.3493923-4-alex.bennee@linaro.org>
The alpine image doesn't have a standard useradd binary so disable
this convenience feature for it.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220225172021.3493923-3-alex.bennee@linaro.org>
This was broken in the re-factor:
e86c9a64f4 ("tests/docker/Makefile.include: add a generic docker-run target")
Rather than unwind the changes just apply the filters to the total set
of available images and tests. That way we don't inadvertently build
images only not to use them later.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reported-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220225172021.3493923-2-alex.bennee@linaro.org>
- Add automatic DTS generation to openrisc_sim
-----BEGIN PGP SIGNATURE-----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=8BMA
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/shorne/tags/or1k-pull-request' into staging
OpenRISC patches
- Add automatic DTS generation to openrisc_sim
# gpg: Signature made Sat 26 Feb 2022 01:39:55 GMT
# gpg: using RSA key D9C47354AEF86C103A25EFF1C3B31C2D5E6627E4
# gpg: Good signature from "Stafford Horne <shorne@gmail.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: D9C4 7354 AEF8 6C10 3A25 EFF1 C3B3 1C2D 5E66 27E4
* remotes/shorne/tags/or1k-pull-request:
hw/openrisc/openrisc_sim: Add support for initrd loading
hw/openrisc/openrisc_sim: Add automatic device tree generation
hw/openrisc/openrisc_sim: Increase max_cpus to 4
hw/openrisc/openrisc_sim: Use IRQ splitter when connecting UART
hw/openrisc/openrisc_sim: Parameterize initialization
hw/openrisc/openrisc_sim: Create machine state for or1ksim
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Commit 57df0dff1a "qapi: Extend -compat to set policy for unstable
interfaces" (v6.2.0) took care of covering experimental features, but
neglected to adjust a comment suggesting to cover it. Adjust it now.
Fixes: 57df0dff1a
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20220225084538.218876-1-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Event RTC_CHANGE is "emitted when the guest changes the RTC time" (and
the RTC supports the event). What if there's more than one RTC?
Which one changed? New @qom-path identifies it.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <87a6ejnm80.fsf@pond.sub.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Now that the RTC_CHANGE event is no longer target-specific,
we can move the pl031 back to a compile-once source file
rather than a compile-per-target one.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20220221192123.749970-4-peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
The RTC_CHANGE event's documentation is missing some details:
* the offset argument is in units of seconds
* it isn't guaranteed that the RTC will implement the event
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20220221192123.749970-3-peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
This commit effectively reverts commit 183e4281a3, which moved
the RTC_CHANGE event to the target schema. That change was an
attempt to make the event target-specific to improve introspection,
but the event isn't really target-specific: it's machine or device
specific. Putting RTC_CHANGE in the target schema with an ifdef list
reduces maintainability (by adding an if: list with a long list of
targets that needs to be manually updated as architectures are added
or removed or as new devices gain the RTC_CHANGE functionality) and
increases compile time (by preventing RTC devices which emit the
event from being "compile once" rather than "compile once per
target", because qapi-events-misc-target.h uses TARGET_* ifdefs,
which are poisoned in "compile once" files.)
Move RTC_CHANGE back to misc.json.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Greg Kurz <groug@kaod.org>
Message-Id: <20220221192123.749970-2-peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
The examples for the snapshot-* and calc-dirty-rate commands document
that arguments for the commands are passed in a 'data' field.
This is wrong, passing them in a "data" field results in
the error:
{"error": {"class": "GenericError", "desc": "QMP input member 'data'
is unexpected"}}
Arguments are expected to be passed in an field called "arguments".
Replace "data" with "arguments" in the snapshot-* and calc-dirty-rate
command examples.
Signed-off-by: Fabian Holler <fabian.holler@simplesurance.de>
Message-Id: <20220222170116.63105-1-fabian.holler@simplesurance.de>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20220218145551.892787-3-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
According to the grammar, a key __com.redhat_foo would be parsed as
two key fragments __com and redhat_foo. It's actually parsed as a
single fragment. Fix the grammar.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20220218145551.892787-2-armbru@redhat.com>
Get isort and pylint tools passing again.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20220211183650.2946895-1-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Comment explaining good-names-rgxs tweaked]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
TCG implements everything we need to run basic z15 OS+software
Signed-off-by: David Miller <dmiller423@gmail.com>
Message-Id: <20220223223117.66660-3-dmiller423@gmail.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
implements:
AND WITH COMPLEMENT (NCRK, NCGRK)
NAND (NNRK, NNGRK)
NOT EXCLUSIVE OR (NXRK, NXGRK)
NOR (NORK, NOGRK)
OR WITH COMPLEMENT (OCRK, OCGRK)
SELECT (SELR, SELGR)
SELECT HIGH (SELFHR)
MOVE RIGHT TO LEFT (MVCRL)
POPULATION COUNT (POPCNT)
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/737
Signed-off-by: David Miller <dmiller423@gmail.com>
Message-Id: <20220223223117.66660-2-dmiller423@gmail.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
QEMU will soon drop the support for Ubuntu 18.04, so let's update
the Travis jobs that were still using this version to 20.04 instead.
While we're at it, also remove an obsolete comment about Ubuntu
Xenial being the default for our Travis jobs.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220221153423.1028465-1-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Add a series of macros to create system call macros that go via the
safe_syscall path.
Signed-off-by: Kyle Evans <kevans@FreeBSD.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
target_arg64 is a generic way to extract 64-bits from a pair of
arguments. On 32-bit platforms, it returns them joined together as
appropriate. On 64-bit platforms, it returns the first arg because it's
already 64-bits.
Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Kyle Evans <kevans@FreeBSD.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Create target.h. This file is intended to be simple and describe basic
things about the architecture. If something is a basic feature of the
architecture, it belongs here. Should we need something that's per-BSD
there will be a target-os.h that will live in the per-bsd directories.
Define regpairs_aligned to reflect whether or not registers are 'paired'
for 64-bit arguments or not. This will be false for all 64-bit targets,
and will be true on those architectures that pair (currently just armv7
and powerpc on FreeBSD 14.x).
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Kyle Evans <kevans@FreeBSD.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
