Let's provide a standardized interface to baseline two CPU models, to
create a third, compatible one. This is especially helpful when two
CPU models are not identical, but a CPU model is required that is
guaranteed to run under both configurations, where the original models run.
"query-cpu-model-baseline" takes two CPU models and returns a third,
compatible model. The result will always be a static CPU model.
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Message-Id: <20160905085244.99980-28-dahi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Let's provide a standardized interface to compare two CPU models.
"query-cpu-model-compare" takes two models and returns how they compare
in a specific configuration.
The result will give guarantees about runnability. E.g. if a CPU model A
is a subset of CPU model B, model A is guaranteed to run in configurations
where model B runs, but not the other way around (might or might not run).
Usually, CPU features or CPU generations are used to calculate the result.
If a model is not guaranteed to run in a certain environment (e.g.
incompatible), a compatible one can be created by "baselining" both models
(follow up patch).
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Message-Id: <20160905085244.99980-27-dahi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Let's provide a standardized interface to expand CPU models. This interface
can be used by tooling to get details about a specific CPU model in a
certain configuration, e.g. about the "host" model.
To take care of all architectures, two detail levels for an expansion
are introduced. Certain architectures might not support all detail levels.
While "full" will expand and indicate all relevant properties/features
of a CPU model, "static" expands to a static base CPU model, that will
never change between QEMU versions and therefore have the same features
when used under different compatibility machines.
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Message-Id: <20160905085244.99980-26-dahi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
The mha is provided in the CPU model, so get any CPU and extract the value.
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Message-Id: <20160905085244.99980-18-dahi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
If we have a lowest ibc, we can indicate the ibc to the guest.
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Message-Id: <20160905085244.99980-17-dahi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
The sclp "read cpu info" and "read scp info" commands can include
features for the cpu info and configuration characteristics (extended),
decribing some advanced features available in the configuration.
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Message-Id: <20160905085244.99980-15-dahi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
The cssid 255 is reserved but still valid from an architectural
point of view. However, feeding a bogus schid of 0xffffffff into
the virtio hypercall will lead to a crash:
Stack trace of thread 138363:
#0 0x00000000100d168c css_find_subch (qemu-system-s390x)
#1 0x00000000100d3290 virtio_ccw_hcall_notify
#2 0x00000000100cbf60 s390_virtio_hypercall
#3 0x000000001010ff7a handle_hypercall
#4 0x0000000010079ed4 kvm_cpu_exec (qemu-system-s390x)
#5 0x00000000100609b4 qemu_kvm_cpu_thread_fn
#6 0x000003ff8b887bb4 start_thread (libpthread.so.0)
#7 0x000003ff8b78df0a thread_start (libc.so.6)
This is because the css array was only allocated for 0..254
instead of 0..255.
Let's fix this by bumping MAX_CSSID to 255 and fencing off the
reserved cssid of 255 during css image allocation.
Reported-by: Christian Borntraeger <borntraeger@de.ibm.com>
Tested-by: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
We're going to make use of g_dir_make_tmp() in test-logging. Provide a
compatibility implementation of it for glib < 2.30.
May behave differently in some edge cases (e.g. pattern only at the
end of the template, the file name is not part of the error message),
but good enough in practice.
Signed-off-by: Sascha Silbe <silbe@linux.vnet.ibm.com>
Message-id: 1471545963-11720-2-git-send-email-silbe@linux.vnet.ibm.com
[PMM: removed variable "template" which caused compilation failures
when C++ files include glib-compat.h]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The following commit
commit 3ff2f67a7c
Author: Evgeny Yakovlev <eyakovlev@virtuozzo.com>
Date: Mon Jul 18 22:39:52 2016 +0300
block: ignore flush requests when storage is clean
has introduced a regression.
There is a problem that it is still possible for 2 requests to execute
in non sequential fashion and sometimes this results in a deadlock
when bdrv_drain_one/all are called for BDS with such stalled requests.
1. Current flushed_gen and flush_started_gen is 1.
2. Request 1 enters bdrv_co_flush to with write_gen 1 (i.e. the same
as flushed_gen). It gets past flushed_gen != flush_started_gen and
sets flush_started_gen to 1 (again, the same it was before).
3. Request 1 yields somewhere before exiting bdrv_co_flush
4. Request 2 enters bdrv_co_flush with write_gen 2. It gets past
flushed_gen != flush_started_gen and sets flush_started_gen to 2.
5. Request 2 runs to completion and sets flushed_gen to 2
6. Request 1 is resumed, runs to completion and sets flushed_gen to 1.
However flush_started_gen is now 2.
From here on out flushed_gen is always != to flush_started_gen and all
further requests will wait on flush_queue. This change replaces
flush_started_gen with an explicitly tracked active flush request.
Signed-off-by: Evgeny Yakovlev <eyakovlev@virtuozzo.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
Message-id: 1471457214-3994-2-git-send-email-den@openvz.org
CC: Stefan Hajnoczi <stefanha@redhat.com>
CC: Fam Zheng <famz@redhat.com>
CC: Kevin Wolf <kwolf@redhat.com>
CC: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The virtio-gpu.h file defines a macro VIRTIO_GPU_FILL_CMD
which includes a call to qemu_log_mask, but does not
include qemu/log.h. In a default configure, it is lucky
and gets qemu/log.h indirectly due to the 'log' trace
backend being enabled. If that trace backend is disabled
though, eg
./configure --enable-trace-backends=nop
Then the build will fail:
In file included from /home/berrange/src/virt/qemu/hw/display/virtio-gpu-3d.c:19:0:
/home/berrange/src/virt/qemu/hw/display/virtio-gpu-3d.c: In function ‘virgl_cmd_create_resource_2d’:
/home/berrange/src/virt/qemu/include/hw/virtio/virtio-gpu.h:138:13: error: implicit declaration of function ‘qemu_log_mask’ [-Werror=implicit-function-declaration]
qemu_log_mask(LOG_GUEST_ERROR, \
^
/home/berrange/src/virt/qemu/hw/display/virtio-gpu-3d.c:34:5: note: in expansion of macro ‘VIRTIO_GPU_FILL_CMD’
VIRTIO_GPU_FILL_CMD(c2d);
^~~~~~~~~~~~~~~~~~~
/home/berrange/src/virt/qemu/hw/display/virtio-gpu-3d.c:34:5: error: nested extern declaration of ‘qemu_log_mask’ [-Werror=nested-externs]
In file included from /home/berrange/src/virt/qemu/hw/display/virtio-gpu-3d.c:19:0:
/home/berrange/src/virt/qemu/include/hw/virtio/virtio-gpu.h:138:27: error: ‘LOG_GUEST_ERROR’ undeclared (first use in this function)
qemu_log_mask(LOG_GUEST_ERROR, \
[snip many more errors]
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 1470648700-3474-1-git-send-email-berrange@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Just a single patch here, I hope this is the last ppc / spapr fix to
squeeze into qemu-2.7.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=Jm4E
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-2.7-20160815' into staging
ppc patch queue for 2016-08-15
Just a single patch here, I hope this is the last ppc / spapr fix to
squeeze into qemu-2.7.
# gpg: Signature made Mon 15 Aug 2016 07:46:36 BST
# gpg: using RSA key 0x6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>"
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>"
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392
* remotes/dgibson/tags/ppc-for-2.7-20160815:
ppc: parse cpu features once
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Change the flag type to 'uint8_t' to fix the implicit conversion error.
Signed-off-by: Pranith Kumar <bobby.prani@gmail.com>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Message-id: 20160810185502.32015-1-bobby.prani@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Considering that features are converted to global properties and
global properties are automatically applied to every new instance
of created CPU (at object_new() time), there is no point in
parsing cpu_model string every time a CPU created. So move
parsing outside CPU creation loop and do it only once.
Parsing also should be done before any CPU is created so that
features would affect the first CPU a well.
This patch does that for all PowerPC machine types.
It is based on previous work from Bharata:
https://lists.nongnu.org/archive/html/qemu-devel/2016-06/msg07564.html
Signed-off-by: Greg Kurz <groug@kaod.org>
[clg: only kept the fix for the spapr platform. support for other
platform will be added in 2.8 ]
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Tested-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
VMs created on older versions on Xen will not have been provisioned with
pages to support creation of non-default ioreq servers. In this case
the ioreq server API is not supported and QEMU's only option is to fall
back to using the default ioreq server pages as it did prior to
commit 3996e85c ("Xen: Use the ioreq-server API when available").
This patch therefore changes the code in xen_common.h to stop considering
a failure of xc_hvm_create_ioreq_server() as a hard failure but simply
as an indication that the guest is too old to support the ioreq server
API. Instead a boolean is set to cause reversion to old behaviour such
that the default ioreq server is then used.
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Stefano Stabellini <sstabellini@kernel.org>
Currently the -version command line argument prints a string ending
with "Copyright (c) 2003-2008 Fabrice Bellard". This is now some
eight years out of date; abstract it out of the several places that
print the string and update it to:
Copyright (c) 2003-2016 Fabrice Bellard and the QEMU Project developers
to reflect the work by all the QEMU Project contributors over the
last decade.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1470309276-5012-1-git-send-email-peter.maydell@linaro.org
With the latest clang, we have the following warning:
/home/pranith/devops/code/qemu/include/qemu/seqlock.h:62:21: warning: passing 'typeof (*&sl->sequence) *' (aka 'const unsigned int *') to parameter of type 'unsigned int *' discards qualifiers [-Wincompatible-pointer-types-discards-qualifiers]
return unlikely(atomic_read(&sl->sequence) != start);
^~~~~~~~~~~~~~~~~~~~~~~~~~
/home/pranith/devops/code/qemu/include/qemu/atomic.h:58:25: note: expanded from macro 'atomic_read'
__atomic_load(ptr, &_val, __ATOMIC_RELAXED); \
^~~~~
Stripping const is a bit tricky due to promotions, but it is doable
with either C11 _Generic or GCC extensions. Use the latter.
Reported-by: Pranith Kumar <bobby.prani@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
[pranith: Add conversion for bool type]
Signed-off-by: Pranith Kumar <bobby.prani@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Since aa5cb7f5e, the chardevs are being cleaned up when leaving
qemu. However, the monitor has still references to them, which may
lead to crashes when running atexit() and trying to send monitor
events:
#0 0x00007fffdb18f6f5 in __GI_raise (sig=sig@entry=6) at ../sysdeps/unix/sysv/linux/raise.c:54
#1 0x00007fffdb1912fa in __GI_abort () at abort.c:89
#2 0x0000555555c263e7 in error_exit (err=22, msg=0x555555d47980 <__func__.13537> "qemu_mutex_lock") at util/qemu-thread-posix.c:39
#3 0x0000555555c26488 in qemu_mutex_lock (mutex=0x5555567a2420) at util/qemu-thread-posix.c:66
#4 0x00005555558c52db in qemu_chr_fe_write (s=0x5555567a2420, buf=0x55555740dc40 "{\"timestamp\": {\"seconds\": 1470041716, \"microseconds\": 989699}, \"event\": \"SPICE_DISCONNECTED\", \"data\": {\"server\": {\"port\": \"5900\", \"family\": \"ipv4\", \"host\": \"127.0.0.1\"}, \"client\": {\"port\": \"40272\", \"f"..., len=240) at qemu-char.c:280
#5 0x0000555555787cad in monitor_flush_locked (mon=0x5555567bd9e0) at /home/elmarco/src/qemu/monitor.c:311
#6 0x0000555555787e46 in monitor_puts (mon=0x5555567bd9e0, str=0x5555567a44ef "") at /home/elmarco/src/qemu/monitor.c:353
#7 0x00005555557880fe in monitor_json_emitter (mon=0x5555567bd9e0, data=0x5555567c73a0) at /home/elmarco/src/qemu/monitor.c:401
#8 0x00005555557882d2 in monitor_qapi_event_emit (event=QAPI_EVENT_SPICE_DISCONNECTED, qdict=0x5555567c73a0) at /home/elmarco/src/qemu/monitor.c:472
#9 0x000055555578838f in monitor_qapi_event_queue (event=QAPI_EVENT_SPICE_DISCONNECTED, qdict=0x5555567c73a0, errp=0x7fffffffca88) at /home/elmarco/src/qemu/monitor.c:497
#10 0x0000555555c15541 in qapi_event_send_spice_disconnected (server=0x5555571139d0, client=0x5555570d0db0, errp=0x5555566c0428 <error_abort>) at qapi-event.c:1038
#11 0x0000555555b11bc6 in channel_event (event=3, info=0x5555570d6c00) at ui/spice-core.c:248
#12 0x00007fffdcc9983a in adapter_channel_event (event=3, info=0x5555570d6c00) at reds.c:120
#13 0x00007fffdcc99a25 in reds_handle_channel_event (reds=0x5555567a9d60, event=3, info=0x5555570d6c00) at reds.c:324
#14 0x00007fffdcc7d4c4 in main_dispatcher_self_handle_channel_event (self=0x5555567b28b0, event=3, info=0x5555570d6c00) at main-dispatcher.c:175
#15 0x00007fffdcc7d5b1 in main_dispatcher_channel_event (self=0x5555567b28b0, event=3, info=0x5555570d6c00) at main-dispatcher.c:194
#16 0x00007fffdcca7674 in reds_stream_push_channel_event (s=0x5555570d9910, event=3) at reds-stream.c:354
#17 0x00007fffdcca749b in reds_stream_free (s=0x5555570d9910) at reds-stream.c:323
#18 0x00007fffdccb5dad in snd_disconnect_channel (channel=0x5555576a89a0) at sound.c:229
#19 0x00007fffdccb9e57 in snd_detach_common (worker=0x555557739720) at sound.c:1589
#20 0x00007fffdccb9f0e in snd_detach_playback (sin=0x5555569fe3f8) at sound.c:1602
#21 0x00007fffdcca3373 in spice_server_remove_interface (sin=0x5555569fe3f8) at reds.c:3387
#22 0x00005555558ff6e2 in line_out_fini (hw=0x5555569fe370) at audio/spiceaudio.c:152
#23 0x00005555558f909e in audio_atexit () at audio/audio.c:1754
#24 0x00007fffdb1941e8 in __run_exit_handlers (status=0, listp=0x7fffdb5175d8 <__exit_funcs>, run_list_atexit=run_list_atexit@entry=true) at exit.c:82
#25 0x00007fffdb194235 in __GI_exit (status=<optimized out>) at exit.c:104
#26 0x00007fffdb17b738 in __libc_start_main (main=0x5555558d7874 <main>, argc=67, argv=0x7fffffffcf48, init=<optimized out>, fini=<optimized out>, rtld_fini=<optimized out>, stack_end=0x7fffffffcf38) at ../csu/libc-start.c:323
Add a monitor_cleanup() functions to remove all the monitors before
cleaning up the chardev. Note that we are "losing" some events that
used to be sent during atexit().
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20160801112343.29082-2-marcandre.lureau@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
This batch has several last minute bug fixes to be merged for
qemu-2.7.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=hKMF
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-2.7-20160808' into staging
ppc patch queue 2016-08-08
This batch has several last minute bug fixes to be merged for
qemu-2.7.
# gpg: Signature made Mon 08 Aug 2016 03:40:58 BST
# gpg: using RSA key 0x6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>"
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>"
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392
* remotes/dgibson/tags/ppc-for-2.7-20160808:
spapr: Fix undefined behaviour in spapr_tce_reset()
macio: set res_count value to 0 after non-block ATAPI DMA transfers
spapr: Correctly set query_hotpluggable_cpus hook based on machine version
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Prior to c8721d3 "spapr: Error out when CPU hotplug is attempted on older
pseries machines", attempting to use query-hotpluggable-cpus on pseries-2.6
and earlier machine types would SEGV.
That change fixed that, but due to some unexpected interactions in init
order and a brown-paper-bag worthy failure to test, it accidentally
disabled query-hotpluggable-cpus for all pseries machine types, including
the current one which should allow it.
In fact, query_hotpluggable_cpus needs to be non-NULL when and only when
the dr_cpu_enabled flag in sPAPRMachineClass is set, which makes
dr_cpu_enabled itself redundant.
This patch removes dr_cpu_enabled, instead directly setting
query_hotpluggable_cpus from the machine class_init functions, and using
that to determine the availability of CPU hotplug when necessary.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Rather than rely on recursion during the middle of register allocation,
lower indirect registers to loads and stores off the indirect base into
plain temps.
For an x86_64 host, with sufficient registers, this results in identical
code, modulo the actual register assignments.
For an i686 host, with insufficient registers, this means that temps can
be (temporarily) spilled to the stack in order to satisfy an allocation.
This as opposed to the possibility of not being able to spill, to allocate
a register for the indirect base, in order to perform a spill.
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Instead of using -1 as end of chain, use 0, and link through the 0
entry as a fully circular double-linked list.
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
For i386, the ABI specifies that 'long long' (8 byte values)
need only be 4 aligned, but we were requiring them to be
8-aligned. This meant we were laying out the target_epoll_event
structure wrongly. Add a suitable ifdef to abitypes.h to
specify the i386-specific alignment requirement.
Reported-by: Icenowy Zheng <icenowy@aosc.xyz>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
* remove unused functions
* qht segfault and memory leak fixes
* NBD fixes
* Fix for non-power-of-2 discard granularity
* Memory hotplug fixes
* Migration regressions
* IOAPIC fixes and (disabled by default) EOI register support
* Various other small fixes
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQExBAABCAAbBQJXoiNRFBxwYm9uemluaUByZWRoYXQuY29tAAoJEL/70l94x66D
ZwMH/1HmEYIAyyd9T8z2sNjdN7vKCNsphS7OXALDnwTp+VX4icUbf41NC6Eeg/e+
6OKA90KSBTquG3wxsXrUK5Nwy7EKMoCXVQrdYw5T04OidQLtJosKgPx4MrvPSx8h
caFUXo9WynT/aGRNc14gnZZiooQxsy/JoNhuml/WL0nupEmoUb/Ns3Yo++HRHntR
rFmJvvD9SrQsWzd9+aJ8zm+Qi09gXsbj1grr6LHCLVmwDWAJooFev6MqBvplkL50
OLqCJfAXJ2srUoEboVdg3V+sFtB8Eru+iMdpZyLwo07V4BBK7heEsXx6JJkTObMC
90MSnMo6BauUO/R/bMvvLlNWykU=
=XqbI
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging
* xsetbv fix (x86 targets TCG)
* remove unused functions
* qht segfault and memory leak fixes
* NBD fixes
* Fix for non-power-of-2 discard granularity
* Memory hotplug fixes
* Migration regressions
* IOAPIC fixes and (disabled by default) EOI register support
* Various other small fixes
# gpg: Signature made Wed 03 Aug 2016 18:01:05 BST
# gpg: using RSA key 0xBFFBD25F78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>"
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* remotes/bonzini/tags/for-upstream: (25 commits)
util: Fix assertion in iov_copy() upon zero 'bytes' and non-zero 'offset'
qdev: Fix use after free in qdev_init_nofail error path
Reorganize help output of '-display' option
x86: ioapic: add support for explicit EOI
x86: ioapic: ignore level irq during processing
apic: fix broken migration for kvm-apic
fw_cfg: Make base type "fw_cfg" abstract
block: Cater to iscsi with non-power-of-2 discard
osdep: Document differences in rounding macros
nbd: Limit nbdflags to 16 bits
nbd: Fix bad flag detection on server
i2c: fix migration regression introduced by broadcast support
mptsas: really fix migration compatibility
qdist: return "(empty)" instead of NULL when printing an empty dist
qdist: use g_renew and g_new instead of g_realloc and g_malloc.
qdist: fix memory leak during binning
target-i386: fix typo in xsetbv implementation
qht: do not segfault when gathering stats from an uninitialized qht
util: Drop inet_listen()
util: drop unix_nonblocking_connect()
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Some old Linux kernels (upstream before v4.0), or any released RHEL
kernels has problem in sending APIC EOI when IR is enabled. Meanwhile,
many of them only support explicit EOI for IOAPIC, which is only
introduced in IOAPIC version 0x20. This patch provide a way to boost
QEMU IOAPIC to version 0x20, in order for QEMU to correctly receive EOI
messages.
Without boosting IOAPIC version to 0x20, kernels before commit d32932d
("x86/irq: Convert IOAPIC to use hierarchical irqdomain interfaces")
will have trouble enabling both IR and level-triggered interrupt devices
(like e1000).
To upgrade IOAPIC to version 0x20, we need to specify:
-global ioapic.version=0x20
To be compatible with old systems, 0x11 will still be the default IOAPIC
version. Here 0x11 and 0x20 are the only versions to be supported.
One thing to mention: this patch only applies to emulated IOAPIC. It
does not affect kernel IOAPIC behavior.
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <1470059959-372-1-git-send-email-peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
commit f6e98444 (apic: Use apic_id as apic's migration instance_id)
breaks migration when in kernel irqchip is used for 2.6 and older
machine types.
It applies compat property only for userspace 'apic' type
instead of applying it to all apic types inherited from
'apic-common' type as it was supposed to do.
Fix it by setting compat property 'legacy-instance-id' for
'apic-common' type which affects inherited types (i.e. not
only 'apic' but also 'kvm-apic' types)
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <1469800542-11402-1-git-send-email-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Dell Equallogic iSCSI SANs have a very unusual advertised geometry:
$ iscsi-inq -e 1 -c $((0xb0)) iscsi://XXX/0
wsnz:0
maximum compare and write length:1
optimal transfer length granularity:0
maximum transfer length:0
optimal transfer length:0
maximum prefetch xdread xdwrite transfer length:0
maximum unmap lba count:30720
maximum unmap block descriptor count:2
optimal unmap granularity:30720
ugavalid:1
unmap granularity alignment:0
maximum write same length:30720
which says that both the maximum and the optimal discard size
is 15M. It is not immediately apparent if the device allows
discard requests not aligned to the optimal size, nor if it
allows discards at a finer granularity than the optimal size.
I tried to find details in the SCSI Commands Reference Manual
Rev. A on what valid values of maximum and optimal sizes are
permitted, but while that document mentions a "Block Limits
VPD Page", I couldn't actually find documentation of that page
or what values it would have, or if a SCSI device has an
advertisement of its minimal unmap granularity. So it is not
obvious to me whether the Dell Equallogic device is compliance
with the SCSI specification.
Fortunately, it is easy enough to support non-power-of-2 sizing,
even if it means we are less efficient than truly possible when
targetting that device (for example, it means that we refuse to
unmap anything that is not a multiple of 15M and aligned to a
15M boundary, even if the device truly does support a smaller
granularity where unmapping actually works).
Reported-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1469129688-22848-5-git-send-email-eblake@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Make it obvious which macros are safe in which situations.
Useful since QEMU_ALIGN_UP and ROUND_UP both purport to do
the same thing, but differ on whether the alignment must be
a power of 2.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1469129688-22848-4-git-send-email-eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Rather than asserting that nbdflags is within range, just give
it the correct type to begin with :) nbdflags corresponds to
the per-export portion of NBD Protocol "transmission flags", which
is 16 bits in response to NBD_OPT_EXPORT_NAME and NBD_OPT_GO.
Furthermore, upstream NBD has never passed the global flags to
the kernel via ioctl(NBD_SET_FLAGS) (the ioctl was first
introduced in NBD 2.9.22; then a latent bug in NBD 3.1 actually
tried to OR the global flags with the transmission flags, with
the disaster that the addition of NBD_FLAG_NO_ZEROES in 3.9
caused all earlier NBD 3.x clients to treat every export as
read-only; NBD 3.10 and later intentionally clip things to 16
bits to pass only transmission flags). Qemu should follow suit,
since the current two global flags (NBD_FLAG_FIXED_NEWSTYLE
and NBD_FLAG_NO_ZEROES) have no impact on the kernel's behavior
during transmission.
CC: qemu-stable@nongnu.org
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1469129688-22848-3-git-send-email-eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Instead of calling xen_be_register() for each supported backend type
for hvm and pv guests in their machine init functions use a common
function in order not to have to add new backends twice.
This at once fixes the error that hvm domains couldn't use the qusb
backend.
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
Message-id: 1470119552-16170-1-git-send-email-jgross@suse.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Since commit e65c67e4, inet_listen() is not used anymore, and all
inet listen operation goes through QIOChannel.
Cc: Daniel P. Berrange <berrange@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Eric Blake <eblake@redhat.com>
Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com>
Message-Id: <1469451771-1173-3-git-send-email-caoj.fnst@cn.fujitsu.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It is never used; all nonblocking connect now goes through
socket_connect(), which calls unix_connect_addr().
Cc: Daniel P. Berrange <berrange@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com>
Message-Id: <1469097213-26441-3-git-send-email-caoj.fnst@cn.fujitsu.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It is never used; all nonblocking connect now goes through
socket_connect(), which calls inet_connect_addr().
Cc: Daniel P. Berrange <berrange@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com>
Message-Id: <1469097213-26441-2-git-send-email-caoj.fnst@cn.fujitsu.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When adding hostmem backend at runtime, QEMU might exit with error:
"os_mem_prealloc: Insufficient free host memory pages available to allocate guest RAM"
It happens due to os_mem_prealloc() not handling errors gracefully.
Fix it by passing errp argument so that os_mem_prealloc() could
report error to callers and undo performed allocation when
os_mem_prealloc() fails.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <1469008443-72059-1-git-send-email-imammedo@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It is naturally expected that some memory ordering should be provided
around qht_insert() and qht_lookup(). Document these assumptions in the
header file and put some comments in the source to denote how that
memory ordering requirements are fulfilled.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
[Sergey Fedorov: commit title and message provided;
comment on qht_remove() elided]
Signed-off-by: Sergey Fedorov <serge.fdrv@gmail.com>
Message-Id: <20160715175852.30749-2-sergey.fedorov@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
a bunch of bugfixes and a couple of cleanups
making these easier and/or making debugging easier
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJXmslFAAoJECgfDbjSjVRpev0IAMZghEuSeKMB2JR88dErS8P5
J6y/1W2VFuRa1YBkTz/ecr5r2RwIO5teZUZpUkibM65Zo6bu1liMo6gbzeCg/xOi
k437pNRl6W9RVWuXQM9VOegNoGYhX3Hrnu3iQeiT8KRY3OMCwG52umUXYVodJh1R
mlozlEcSyUEDZVdNjhRECuUiw8RRcErEtiKda+zjkf4tPAGkyCItVpLYshE6A2/I
lfQLkv+EWOyuD4cfEHl+4F9K9wegothFTSd/xBmcqqaWRc+pboMVF2A2yga+GjKm
Xgb8SzQYkt9Q1nFr9fz89q89CsjhmfrD/ct/vJAcCFnw/dNXnC6mYjr6MDX0Gd0=
=26Uu
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
pc, pci, virtio: cleanups, fixes
a bunch of bugfixes and a couple of cleanups
making these easier and/or making debugging easier
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Fri 29 Jul 2016 04:11:01 BST
# gpg: using RSA key 0x281F0DB8D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>"
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* remotes/mst/tags/for_upstream: (41 commits)
mptsas: Fix a migration compatible issue
vhost: do not update last avail idx on get_vring_base() failure
vhost: add vhost_net_set_backend()
vhost-user: add error report in vhost_user_write()
tests: fix vhost-user-test leak
tests: plug some leaks in virtio-net-test
vhost-user: wait until backend init is completed
char: add and use tcp_chr_wait_connected
char: add chr_wait_connected callback
vhost: add assert() to check runtime behaviour
vhost-net: vhost_migration_done is vhost-user specific
Revert "vhost-net: do not crash if backend is not present"
vhost-user: add get_vhost_net() assertions
vhost-user: keep vhost_net after a disconnection
vhost-user: check vhost_user_{read,write}() return value
vhost-user: check qemu_chr_fe_set_msgfds() return value
vhost-user: call set_msgfds unconditionally
qemu-char: fix qemu_chr_fe_set_msgfds() crash when disconnected
vhost: use error_report() instead of fprintf(stderr,...)
vhost: add missing VHOST_OPS_DEBUG
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Not all vhost-user backends support ops->vhost_net_set_backend(). It is
a nicer to provide an assert/error than to crash trying to
call. Furthermore, it improves a bit the code by hiding vhost_ops
details.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
A function to wait on the backend to be connected, to be used in the
following patches.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Enable transitional virtio devices by default.
Enable virtio-1.0 for devices plugged into
PCIe ports (Root ports or Downstream ports).
Using the virtio-1 mode will remove the limitation
of the number of devices that can be attached to a machine
by removing the need for the IO BAR.
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
We changed link status register in pci express endpoint capability
over time. Specifically,
commit b2101eae63 ("pcie: Set the "link
active" in the link status register") set data link layer link active
bit in this register without adding compatibility to old machine types.
When migrating from qemu 2.3 and older this affects xhci devices which
under machine type 2.0 and older have a pci express endpoint capability
even if they are on a pci bus.
Add compatibility flags to make this bit value match what it was under
2.3.
Additionally, to avoid breaking migration from qemu 2.3 and up,
suppress checking link status during migration: this seems sane
since hardware can change link status at any time.
https://bugzilla.redhat.com/show_bug.cgi?id=1352860
Reported-by: Gerd Hoffmann <kraxel@redhat.com>
Fixes: b2101eae63
("pcie: Set the "link active" in the link status register")
Cc: qemu-stable@nongnu.org
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Highlights:
* Fixes to allow CPU hotplug/unplug in any order;
* Exit QEMU on invalid global properties.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=2Abo
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/ehabkost/tags/x86-pull-request' into staging
x86 and machine queue, 2016-07-27
Highlights:
* Fixes to allow CPU hotplug/unplug in any order;
* Exit QEMU on invalid global properties.
# gpg: Signature made Wed 27 Jul 2016 15:28:53 BST
# gpg: using RSA key 0x2807936F984DC5A6
# gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>"
# Primary key fingerprint: 5A32 2FD5 ABC4 D3DB ACCF D1AA 2807 936F 984D C5A6
* remotes/ehabkost/tags/x86-pull-request:
vl: exit if a bad property value is passed to -global
qdev: ignore GlobalProperty.errp for hotplugged devices
machine: Add comment to abort path in machine_set_kernel_irqchip
Revert "pc: Enforce adding CPUs contiguously and removing them in opposite order"
pc: Init CPUState->cpu_index with index in possible_cpus[]
qdev: Fix object reference leak in case device.realize() fails
exec: Set cpu_index only if it's not been explictly set
exec: Don't use cpu_index to detect if cpu_exec_init()'s been called
exec: Reduce CONFIG_USER_ONLY ifdeffenery
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This patch ensures QEMU won't terminate while hotplugging a device if the
global property cannot be set and errp points to error_fatal or error_abort.
While here, it also fixes indentation of the typename argument.
Suggested-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
It keeps the legacy behavior for all users that doesn't care
about stable cpu_index value, but would allow boards that
would support device_add/device_del to set stable cpu_index
that won't depend on order in which cpus are created/destroyed.
While at that simplify cpu_get_free_index() as cpu_index
generated by USER_ONLY and softmmu variants is the same
since none of the users support cpu-remove so far, except
of not yet released spapr/x86 device_add/delr, which
will be altered by follow up patches to set stable
cpu_index manually.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
When creating new block encryption volumes, we accept a list of
parameters to control the formatting process. It is useful to
be able to query what those parameters were for existing block
devices. Add a qcrypto_block_get_info() method which returns a
QCryptoBlockInfo instance to report this data.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 1469192015-16487-2-git-send-email-berrange@redhat.com
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
