Create an i2c-bus interface, corresponding to the I2CAdapter struct.
Wrap IMXI2C and OMAPI2C with a QOSGraphObject, and add the get_driver
function to retrieve the I2CAdapter.
The conversion is still not complete; for simplicity, i2c_recv and
i2c_send (along with their wrappers) still take an adapter/address
pair. Fixing that would be complicated until the tests are converted
to qgraph, so it is left for after the conversion.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Some objects are only needed for system emulation and tools.
We can ignore them for the user mode case
Update tests to run accordingly: conditionally build some tests
on CONFIG_BLOCK.
Some tests use components that are only built when softmmu or
block tools are enabled, not for linux-user. So, if these components
are not available, disable the tests.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20190401141222.30034-6-lvivier@redhat.com>
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
When possible use generated-files-$(FLAG) to disable
some targets (like KEYCODEMAP_FILES).
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Message-Id: <20190401141222.30034-3-lvivier@redhat.com>
I recently noticed that test-obj-y contains a file called
tests/check-block-qtest.o which simply does not belong to any .c
file and thus wondered why this is not causing any trouble. It is
only used to add -Itests to the command line (which refers to the
build directory). However, it is not needed because "-iquote $(@D)"
already sets this up in rules.mak. Thus we can simply remove this
variable.
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190508075527.32164-1-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
test-qapi.py doesn't force a specific encoding for stderr or
stdout, but the reference files used by check-qapi-schema are in
UTF-8. This breaks check-qapi-schema under certain circumstances
(e.g. if using the C locale and Python < 3.7).
We need to make sure test-qapi.py always generate UTF-8 output
somehow. On Python 3.7+ we can do it using
`sys.stdout.reconfigure(...)`, but we need a solution that works
with older Python versions.
Instead of trying a hack like reopening sys.stdout and
sys.stderr, we can just tell Python to use UTF-8 for I/O encoding
when running test-qapi.py. Do it by setting PYTHONIOENCODING.
Reported-by: Thomas Huth <thuth@redhat.com>
Tested-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20190506213817.14344-1-ehabkost@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Currently, some tests contains target architecture information, in the
form of a "x86_64" tag. But that tag is not respected in the default
execution, that is, "make check-acceptance" doesn't do anything with
it.
That said, even the target architecture handling currently present in
the "avocado_qemu.Test" class is pretty limited. For instance, by
default, it chooses a target based on the host architecture.
Because the original implementation of the tags feature in Avocado did
not include any time of namespace or "key:val" mechanism, no tag has
relation to another tag. The new implementation of the tags feature
from version 67.0 onwards, allows "key:val" tags, and because of that,
a test can be classified with a tag in a given key. For instance, the
new proposed version of the "boot_linux_console.py" test, which
downloads and attempts to run a x86_64 kernel, is now tagged as:
🥑 tags=arch:x86_64
This means that it can be filtered (out) when no x86_64 target is
available. At the same time, tests that don't have a "arch:" tag,
will not be filtered out.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20190312171824.5134-6-crosa@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
The current version of the "check-acceptance" target will only show
one line for execution of all tests. That's probably OK if the tests
to be run are quick enough and they're always the same.
But, there's already one test alone that takes on average ~5 seconds
to run, we intend to adapt the list of tests to match the user's build
environment (among other choices).
Because of that, let's present the default Avocado UI by default.
Users can always choose a different output by setting the AVOCADO_SHOW
variable.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Caio Carrara <ccarrara@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20190312171824.5134-2-crosa@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
In commit b94b330e23 ("tests: add missing dependency to build
QTEST_QEMU_BINARY", 2017-07-31), Phil fixed the dependency list of make
target "check-qtest-%". Namely, the recipe would set QTEST_QEMU_BINARY to
the softmmu emulator for the emulation target, but the prerequisites
didn't include the emulator.
The same issue affects the "check-report-qtest-%.tap" make target, which
is the other make target whose recipe sets QTEST_QEMU_BINARY:
> $ make -j4 check-report-qtest-aarch64.tap
> TAP check-report-qtest-aarch64.tap
> sh: /.../aarch64-softmmu/qemu-system-aarch64: No such file or directory
Apply Phil's fix to this make target too.
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Tested-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Philippe Mathieu-Daud <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daud <philmd@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
This removes the duplicated initialization code.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
While used by TCG it is not explicitly part of TCG and the tests can
be run standalone in a minimal build.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
- qcow2: Support for external data files
- qcow2: Default to 4KB for the qcow2 cache entry size
- Apply block driver whitelist for -drive format=help
- Several qemu-iotests improvements
-----BEGIN PGP SIGNATURE-----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=GCRI
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging
Block layer patches:
- qcow2: Support for external data files
- qcow2: Default to 4KB for the qcow2 cache entry size
- Apply block driver whitelist for -drive format=help
- Several qemu-iotests improvements
# gpg: Signature made Fri 08 Mar 2019 12:54:27 GMT
# gpg: using RSA key 7F09B272C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" [full]
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6
* remotes/kevin/tags/for-upstream: (33 commits)
qcow2 spec: Describe string header extensions
qemu-iotests: Add dependency to qemu-nbd tool
ahci-test: Add dependency to qemu-img tool
qemu-iotests: amend with external data file
qemu-iotests: General tests for qcow2 with external data file
qemu-iotests: Preallocation with external data file
qcow2: Implement data-file-raw create option
qcow2: Store data file name in the image
qcow2: Creating images with external data file
qcow2: Add basic data-file infrastructure
qcow2: Support external data file in qemu-img check
qcow2: Return error for snapshot operation with data file
qcow2: External file I/O
qcow2: Prepare qcow2_co_block_status() for data file
qcow2: Return 0/-errno in qcow2_alloc_compressed_cluster_offset()
qcow2: Don't assume 0 is an invalid cluster offset
qcow2: Prepare count_contiguous_clusters() for external data file
qcow2: Prepare qcow2_get_cluster_type() for external data file
qcow2: Pass bs to qcow2_get_cluster_type()
qcow2: Basic definitions for external data files
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Since a9660664fd, some iotests use qemu-nbd.
Add a dependency to build it before using it.
This fixes:
$ make check-block
GEN qemu-img-cmds.h
CC qemu-img.o
LINK qemu-img
CC qemu-io.o
LINK qemu-io
CC tests/qemu-iotests/socket_scm_helper.o
LINK tests/qemu-iotests/socket_scm_helper
tests/qemu-iotests-quick.sh
check: qemu-nbd not found
make: *** [tests/Makefile.include:1059: check-tests/qemu-iotests-quick.sh] Error 1
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Since the ahci-test uses qemu-img, add a dependency to build it
before using it.
This fixes:
$ gmake check-qtest V=1
QTEST_QEMU_BINARY=x86_64-softmmu/qemu-system-x86_64 QTEST_QEMU_IMG=qemu-img tests/ahci-test
Failed to execute child process "/tmp/qemu-test.19tMRF/qemu-img" (No such file or directory)
ERROR:tests/libqos/libqos.c:192:mkimg: assertion failed: (ret && !err)
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Convert tests/megasas-test to a driver node; the code to discover the PCI
device is replaced by generic qgraph code.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert tests/e1000-test to a driver node; currently it runs
the PCI nop test only, therefore we're not placing it in tests/libqos.
Signed-off-by: Emanuele Giuseppe Esposito <e.emanuelegiuseppe@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert tests/eepro100-test to a driver node; currently it runs
the PCI nop test only, therefore we're not placing it in tests/libqos.
For now, all nodes share the same constructor and destructor.
Signed-off-by: Emanuele Giuseppe Esposito <e.emanuelegiuseppe@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert tests/es1370-test to a driver node; currently it runs
the PCI nop test only, therefore we're not placing it in tests/libqos.
Signed-off-by: Emanuele Giuseppe Esposito <e.emanuelegiuseppe@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert tests/vmxnet3-test to a driver node; currently it runs
the PCI nop test only, therefore we're not placing it in tests/libqos.
Signed-off-by: Emanuele Giuseppe Esposito <e.emanuelegiuseppe@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert tests/usb-hcd-ohci-test to a driver node; currently it runs
the PCI nop test only, therefore we're not placing it in tests/libqos.
Signed-off-by: Emanuele Giuseppe Esposito <e.emanuelegiuseppe@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert tests/spapr-phb-test to a qgraph test node,
spapr-phb-test. This test adds another
spapr-pci-host-bridge device in the
ppc64/pseries machine
Signed-off-by: Emanuele Giuseppe Esposito <e.emanuelegiuseppe@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert tests/pcnet-test to a driver node; currently it runs
the PCI nop test only, therefore we're not placing it in tests/libqos.
Signed-off-by: Emanuele Giuseppe Esposito <e.emanuelegiuseppe@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert tests/nvme-test to a driver node; the code to discover the PCI
device is replaced by generic qgraph code, therefore we're not placing it in tests/libqos.
Signed-off-by: Emanuele Giuseppe Esposito <e.emanuelegiuseppe@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert tests/ne2000-test to a driver node; currently it runs
the PCI nop test only, therefore we're not placing it in tests/libqos.
The actual device consumed by the test is ne2k_pci.
Signed-off-by: Emanuele Giuseppe Esposito <e.emanuelegiuseppe@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert tests/ipoctal232-test to a driver node; currently it runs
the PCI nop test only, therefore we're not placing it in tests/libqos.
This test creates a tpci200 node that produces an interface ipack
consumed by the ipoctal232 device.
Signed-off-by: Emanuele Giuseppe Esposito <e.emanuelegiuseppe@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert tests/tpci200-test to a driver node; currently it runs
the PCI nop test only, but it also produces the ipack interface.
Signed-off-by: Emanuele Giuseppe Esposito <e.emanuelegiuseppe@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert tests/ac97-test to a driver node; currently it runs
the PCI nop test only, therefore we're not placing it in tests/libqos.
Signed-off-by: Emanuele Giuseppe Esposito <e.emanuelegiuseppe@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The only remaining test that needs libqos-virtio-obj-y is drive_del-test,
which really only needs a function. Move that function to the test
and remove libqos-virtio-obj-y.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert tests/virtio-scsi-test in qgraph test node,
virtio-scsi-test. This test consumes a virtio-scsi interface
and checks that its function return the expected values.
Some functions are implemented only for virtio-scsi-pci, so they
don't consume virtio-scsi, but virtio-scsi-pci
Note that this test does not allocate any virtio-scsi structure,
it's all done by the qtest walking graph mechanism
Signed-off-by: Emanuele Giuseppe Esposito <e.emanuelegiuseppe@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add qgraph nodes for virtio-scsi-pci and virtio-scsi-device.
Both nodes produce virtio-scsi, but virtio-scsi-pci receives
a pci-bus and uses virtio-pci QOSGraphObject and its functions,
while virtio-scsi-device receives a virtio and implements
its own functions
Signed-off-by: Emanuele Giuseppe Esposito <e.emanuelegiuseppe@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert tests/virtio-net-test in qgraph test node,
virtio-net-test. This test consumes a virtio-net interface
and checks that its function return the expected values.
Note that this test does not allocate any virtio-net structure,
it's all done by the qtest walking graph mechanism. Nevertheless,
vhost-user-test is a bit more complex than the other tests, because
it requires more complicated setup of back-ends and thus almost each
test has a slightly different opts.before function.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert tests/virtio-net-test in qgraph test node,
virtio-net-test. This test consumes a virtio-net interface
and checks that its function return the expected values.
Some functions are implemented only for virtio-net-pci, so they
don't consume virtio-net, but virtio-net-pci
Note that this test does not allocate any virtio-net structure,
it's all done by the qtest walking graph mechanism
Signed-off-by: Emanuele Giuseppe Esposito <e.emanuelegiuseppe@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add qgraph nodes for virtio-net-pci and virtio-net-device.
Both nodes produce virtio-net, but virtio-net-pci receives
a pci-bus and overrides virtio-pci QOSGraphObject and its functions,
while virtio-net-device receives a virtio and implements
its own functions
Signed-off-by: Emanuele Giuseppe Esposito <e.emanuelegiuseppe@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert tests/virtio-blk-test in qgraph test node,
virtio-blk-test. This test consumes a virtio-blk interface
and checks that its function return the expected values.
Some functions are implemented only for virtio-blk-pci, so they
don't consume virtio-blk, but virtio-blk-pci
Note that this test does not allocate any virtio-blk structure,
it's all done by the qtest walking graph mechanism. The allocator
is also provided by qgraph; remove malloc-generic.c and malloc-generic.h
which are not used anymore.
Signed-off-by: Emanuele Giuseppe Esposito <e.emanuelegiuseppe@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add qgraph nodes for virtio-blk-pci and virtio-blk-device.
Both nodes produce virtio-blk, but virtio-blk-pci receives
a pci-bus and uses virtio-pci QOSGraphObject and functions,
while virtio-blk-device receives a virtio and implements
its own functions
Signed-off-by: Emanuele Giuseppe Esposito <e.emanuelegiuseppe@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert tests/virtio-rng-test in qgraph test node,
virtio-rng-test. This test consumes a virtio-rng interface
and checks that its function return the expected values.
Some functions are implemented only for virtio-rng-pci, so they
don't consume virtio-rng, but virtio-rng-pci
Note that this test does not allocate any virtio-rng structure,
it's all done by the qtest walking graph mechanism
Signed-off-by: Emanuele Giuseppe Esposito <e.emanuelegiuseppe@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add qgraph nodes for virtio-rng-pci and virtio-rng-device.
Both nodes produce virtio-rng, but virtio-rng-pci receives
a pci-bus and uses virtio-pci QOSGraphObject and functions,
while virtio-rng-device receives a virtio and implements
its own functions
Signed-off-by: Emanuele Giuseppe Esposito <e.emanuelegiuseppe@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The tests/virtio-balloon-test is covered by generic virtio tests,
so remove it.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Emanuele Giuseppe Esposito <e.emanuelegiuseppe@gmail.com>
Add qgraph nodes for virtio-balloon-pci and virtio-balloon-device.
Both nodes produce virtio-balloon, but virtio-balloon-pci receives
a pci-bus and uses virtio-pci QOSGraphObject and functions,
while virtio-balloon-device receives a virtio and implements
its own functions
Signed-off-by: Emanuele Giuseppe Esposito <e.emanuelegiuseppe@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert tests/virtio-9p-test into a qgraph test node.
This test consumes a virtio-9p interface and checks that its functions
return the expected values.
Note that this test does not allocate any virtio-9p structure,
it's all done by the qtest walking graph mechanism
Signed-off-by: Emanuele Giuseppe Esposito <e.emanuelegiuseppe@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add qgraph nodes for virtio-9p-pci and virtio-9p-device.
Both nodes produce virtio-9p, but virtio-9p-pci receives
a pci-bus and overrides virtio-pci QOSGraphObject and its functions,
while virtio-9p-device receives a virtio and implements
its own functions
Signed-off-by: Emanuele Giuseppe Esposito <e.emanuelegiuseppe@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert tests/virtio-console-test and tests/virtio-serial-test
in qgraph test node. This test consumes a virtio-serial interface
and checks that its function return the expected values.
Note that this test does not allocate any virtio-console or
virtio-serial structure, it's all done by the qtest walking graph mechanism
Signed-off-by: Emanuele Giuseppe Esposito <e.emanuelegiuseppe@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add qgraph nodes for virtio-serial-pci and virtio-serial-device.
Both nodes produce virtio-serial, but virtio-serial-pci receives
a pci-bus and uses virtio-pci QOSGraphObject and functions,
while virtio-serial-device receives a virtio-bus and implements
its own functions
Signed-off-by: Emanuele Giuseppe Esposito <e.emanuelegiuseppe@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add arm/virt machine to the graph. This machine contains virtio-mmio, so
its constructor must take care of setting it properly when called.
Signed-off-by: Emanuele Giuseppe Esposito <e.emanuelegiuseppe@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
