The category will be used to sort the devices displayed in
the command line help.
Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com>
Message-id: 1375107465-25767-4-git-send-email-marcel.a@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Support backend option "direct-io-safe". This is documented as
follows in the Xen backend specification:
* direct-io-safe
* Values: 0/1 (boolean)
* Default Value: 0
*
* The underlying storage is not affected by the direct IO memory
* lifetime bug. See:
* http://lists.xen.org/archives/html/xen-devel/2012-12/msg01154.html
*
* Therefore this option gives the backend permission to use
* O_DIRECT, notwithstanding that bug.
*
* That is, if this option is enabled, use of O_DIRECT is safe,
* in circumstances where we would normally have avoided it as a
* workaround for that bug. This option is not relevant for all
* backends, and even not necessarily supported for those for
* which it is relevant. A backend which knows that it is not
* affected by the bug can ignore this option.
*
* This option doesn't require a backend to use O_DIRECT, so it
* should not be used to try to control the caching behaviour.
Also, BDRV_O_NATIVE_AIO is ignored if BDRV_O_NOCACHE, so clarify the
default flags passed to the qemu block layer.
The original proposal for a "cache" backend option has been dropped
because it was believed too wide, especially considering that at the
moment the backend doesn't have a way to tell the toolstack that it is
capable of supporting it.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
The firmware commonly used with MIPS Malta boards (YAMON) reads the
status of the pflash with a 32bit memory access. On real hardware
this results in the status byte being mirrored in the upper 16 bits
of the read value. For example if the status byte is represented by
SS then the hardware reads 0x00SS00SS. The YAMON firmware compares the
status against 32bit values expecting the mirrored value and fails
without it.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Rename fdctrl_init_common() to fdctrl_realize_common() and let
fdctrl_connect_drives() propagate an Error through it.
Reviewed-by: Hu Tao <hutao@cn.fujitsu.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Introduce type constant and replace FROM_SYSBUS().
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
[AF: Renamed parent field]
Signed-off-by: Andreas Färber <afaerber@suse.de>
Introduce type constant and replace FROM_SYSBUS().
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
[AF: Renamed parent field]
Signed-off-by: Andreas Färber <afaerber@suse.de>
Introduce type constant and avoid DO_UPCAST(), container_of(),
and use DEVICE() to avoid accessing parent qdev directly.
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
[AF: Renamed parent field and avoided repeated SYS_BUS_DEVICE() casts]
Signed-off-by: Andreas Färber <afaerber@suse.de>
# By Michael Tokarev (2) and others
# Via Michael Tokarev
* mjt/trivial-patches:
doc: monitor multiplexing rewording
block/m25p80: Update Micron entries
Fix command example in qemu.sasl
slirp: remove mbuf(m_hdr,m_dat) indirection
linux-user: declare sys_futex to have 6 arguments
Message-id: 1374225073-12959-1-git-send-email-mjt@msgid.tls.msk.ru
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
- Split 32Mb and 256Mb parts into a11 and a13 variants.
- Add the 4K sector flag to the 128Mb parts. (These entries were taken from
the Linux kernel list, which is missing the flag.)
- Fill out the table of sizes with entries for 64Mb parts.
Prodded by Peter Crosthwaite.
Signed-off-by: Ed Maste <emaste@freebsd.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Load the virtio.c state into vring.c when we start dataplane mode and
vice versa when stopping dataplane mode. This patch makes it possible
to start and stop dataplane any time while the guest is running.
This will eventually allow us to go back to QEMU main loop for
bdrv_drain_all() and live migration. In the meantime, this patch makes
the dataplane lifecycle more robust but should make no visible
difference. It may be useful in the virtio-net dataplane effort.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Nand chips are not sysbus devices - they do not have any sense of MMIO,
nor interrupts. Re-parent to TYPE_DEVICE accordingly.
Cc: afaerber@suse.de
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The prescribed transition from Sysbus::init function to a
Device::realize.
Cc: afaerber@suse.de
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Define and use standard QOM cast macro. Remove usages of DO_UPCAST and
direct -> style casting.
Cc: afaerber@suse.de
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Make this code closer to passing checkpatch. Mostly missing braces, but
a few rogue tabs in there as well.
Cc: qemu-trivial@nongnu.org
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The DMAContext is a simple pointer to an AddressSpace that is now always
already available. Make everyone hold the address space directly,
and clean up the DMA API to use the AddressSpace directly.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Initial commit for emulated Non-Volatile-Memory Express (NVMe) pci
storage device.
NVMe is an open, industry driven storage specification defining
an optimized register and command set designed to deliver the full
capabilities of non-volatile memory on PCIe SSDs. Further information
may be found on the organizations website at:
http://www.nvmexpress.org/
This commit implements the minimum from the specification to work with
existing drivers.
Cc: Keith Busch <keith.busch@gmail.com>
Signed-off-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Drop ISADeviceClass::init and the resulting no-op initfn and let
children implement their own realizefn. Adapt error handling.
Split off an instance_init where sensible.
Signed-off-by: Andreas Färber <afaerber@suse.de>
We may want to include a driver in the whitelist for read only tasks
such as diagnosing or exporting guest data (with libguestfs as a good
example). This patch introduces a readonly whitelist option, and for
backward compatibility, the old configure option --block-drv-whitelist
is now an alias to rw whitelist.
Drivers in readonly list is only permitted to open file readonly, and
returns -ENOTSUP for RW opening.
E.g. To include vmdk readonly, and others read+write:
./configure --target-list=x86_64-softmmu \
--block-drv-rw-whitelist=qcow2,raw,file,qed \
--block-drv-ro-whitelist=vmdk
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
When pc-sysfw.rom_only == 0, flash memory will be
usable with kvm. In order to enable flash memory mode,
a pflash device must be created. (For example, by
using the -pflash command line parameter.)
Usage of a flash memory device with kvm requires
KVM_CAP_READONLY_MEM, and kvm will abort if
a flash device is used with an older kvm which does
not support this capability.
If a flash device is not used, then qemu/kvm will
operate in the original rom-mode.
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1369816047-16384-5-git-send-email-jordan.l.justen@intel.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The isapc machine with seabios currently requires the BIOS region
to be read/write memory rather than read-only memory.
KVM currently cannot support the BIOS as a ROM region, but qemu
in non-KVM mode can. Based on this, isapc machine currently only
works with KVM.
To work-around this isapc issue, this change avoids marking the
BIOS as readonly for isapc.
This change also will allow KVM to start supporting ROM mode
via KVM_CAP_READONLY_MEM.
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1369816047-16384-2-git-send-email-jordan.l.justen@intel.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
"Readable" is a very unfortunate name for this flag because even a
rom_device region will always be readable from the guest POV. What
differs is the mapping, just like the comments had to explain already.
Also, readable could currently be understood as being a generic region
flag, but it only applies to rom_device regions.
So rename the flag and the function to modify it after the original term
"ROMD" which could also be interpreted as "ROM direct", i.e. ROM mode
with direct access. In any case, the scope of the flag is clearer now.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This reverts commit 9953f8822c.
While Markus's analysis is entirely correct, there are 1.6 patches
that fix the bug for real and without requiring machine type hacks.
Let's think of the children who will have to read this code, and
avoid a complicated mess of semantics that differ between <1.5,
1.5, and >1.5.
Conflicts:
hw/i386/pc_piix.c
hw/i386/pc_q35.c
include/hw/i386/pc.h
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Anthony Liguori <aliguori@us.ibm.com>
Message-id: 1368189483-7915-1-git-send-email-pbonzini@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Add new devices for various manufacturers, and re-sort Spansion list to
match the order in Linux, which requires chips with a non-zero extended ID
to come first.
With this commit the outstanding differences to Linux rev 55bf75b are:
- Erase size flag differences in s25sl032p, s25sl064p, s25fl016k, s25fl064k
(These devices have only some blocks that support small erase sizes.)
- Linux lacks n25q128
- Devices without a Jedec ID have been excluded
Signed-off-by: Ed Maste <emaste@freebsd.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Introduce type constant and cast macro to obsolete DO_UPCAST().
Reuse type constant for PC machine compatibility settings.
Prepares for ISA realizefn.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Message-id: 1367093935-29091-4-git-send-email-afaerber@suse.de
Cc: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Use of a flash memory device for the BIOS was added in series "[PATCH
v10 0/8] PC system flash support", commit 4732dca..1b89faf, v1.1.
Flash vs. ROM is a guest-visible difference. Thus, flash use had to
be suppressed for machine types pc-1.0 and older. This was
accomplished by adding a dummy device "pc-sysfw" with property
"rom_only":
* Non-zero rom_only means "use ROM". Default for pc-1.0 and older.
* Zero rom_only means "maybe use flash". Default for newer machines.
Not only is the dummy device ugly, it was also retroactively added to
the older machine types! Fortunately, it's not guest-visible (thus no
immediate guest ABI breakage), and has no vmstate (thus no immediate
migration breakage). Breakage occurs only if the user unwisely
enables flash by setting rom_only to zero. Patch review FAIL #1.
Why "maybe use flash"? Flash didn't (and still doesn't) work with
KVM. Therefore, rom_only=0 really means "use flash, except when KVM
is enabled, use ROM". This is a Bad Idea, because it makes enabling/
disabling KVM guest-visible. Patch review FAIL #2.
Aside: it also precludes migrating between KVM on and off, but that's
not possible for other reasons anyway.
Fix as follows:
1. Change the meaning of rom_only=0 to mean "use flash, no ifs, buts,
or maybes" for pc-i440fx-1.5 and pc-q35-1.5. Don't change anything
for older machines (to remain bug-compatible).
2. Change the default value from 0 to 1 for these machines.
Necessary, because 0 doesn't work with KVM. Once it does, we can flip
the default back to 0.
3. Don't revert the retroactive addition of device "pc-sysfw" to older
machine types. Seems not worth the trouble.
4. Add a TODO comment asking for device "pc-sysfw" to be dropped once
flash works with KVM.
Net effect is that you get a BIOS ROM again even when KVM is disabled,
just like for machines predating the introduction of flash.
To get flash instead, use "--global pc-sysfw.rom_only=0".
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-id: 1365780303-26398-4-git-send-email-armbru@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This clean the init and the exit functions and rename virtio_common_cleanup
to virtio_cleanup.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Message-id: 1366791683-5350-7-git-send-email-fred.konrad@greensocs.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This remove virtio-bindings, and use class instead.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Message-id: 1366791683-5350-6-git-send-email-fred.konrad@greensocs.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This remove the function pointer in VirtIODevice, and use only
VirtioDeviceClass function pointer.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Message-id: 1366791683-5350-5-git-send-email-fred.konrad@greensocs.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Drop all the infrastructure for taddr properties (ie ones which
are 'hwaddr' sized). These are now unused, and any further desired
use would be rather questionable since device properties shouldn't
generally depend on a type that is conceptually variable based on
the target CPU. 32 or 64 bit integer properties should be used instead
as appropriate for the specific device.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
I think in the early revisions of this we had an instantiation helper
for the device in devices.h. This was later removed and this header was
left over. Removed
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
If there is no backing bdrv, let the debugging developer know about it.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
The debug printfs on every page program/read is extremely verbose. Add
a second level of debug for this.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Some of the debug printfs in m25p80 are really guest errors.
Changed over to qemu_log_mask(LOG_GUEST_ERROR accordingly.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Some dodgy casts were making a mess of these msgs.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
The recent rearrangement of include files had some minor errors:
devices.h is not ARM specific and should not be in arm/
arm.h should be in arm/
Move these two headers to correct this.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Minor fixes to documentation and code comments.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
