Per chapter 6.5.2 in [1], the number of interupt sources including
interrupt source 0 should be 187.
[1] PolarFire SoC MSS TRM:
https://ww1.microchip.com/downloads/aemDocuments/documents/FPGA/ProductDocuments/ReferenceManuals/PolarFire_SoC_FPGA_MSS_Technical_Reference_Manual_VC.pdf
Fixes: 56f6e31e7b ("hw/riscv: Initial support for Microchip PolarFire SoC Icicle Kit board")
Signed-off-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Wilfred Mallawa <wilfred.mallawa@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Message-Id: <20221211030829.802437-10-bmeng@tinylab.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
At present the default value of "num-sources" property is zero,
which does not make a lot of sense, as in sifive_plic_realize()
we see s->bitfield_words is calculated by:
s->bitfield_words = (s->num_sources + 31) >> 5;
if the we don't configure "num-sources" property its default value
zero makes s->bitfield_words zero too, which isn't true because
interrupt source 0 still occupies one word.
Let's change the default value to 1 meaning that only interrupt
source 0 is supported by default and a sanity check in realize().
While we are here, add a comment to describe the exact meaning of
this property that the number should include interrupt source 0.
Signed-off-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20221211030829.802437-9-bmeng@tinylab.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The realize() callback has an errp for us to propagate the error up.
While we are here, correct the wrong multi-line comment format.
Signed-off-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221211030829.802437-8-bmeng@tinylab.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
At present the PLIC config parser can only handle legal config string
like "MS,MS". However if a config string like ",MS,MS,,MS,MS,," is
given the parser won't get the correct configuration.
This commit improves the config parser to make it more robust.
Signed-off-by: Bin Meng <bmeng@tinylab.org>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20221211030829.802437-7-bmeng@tinylab.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
H-mode has been removed since priv spec 1.10. Drop it.
Signed-off-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Wilfred Mallawa <wilfred.mallawa@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20221211030829.802437-6-bmeng@tinylab.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
PLIC is not included in the 'spike' machine.
Signed-off-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Wilfred Mallawa <wilfred.mallawa@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20221211030829.802437-5-bmeng@tinylab.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
SHAKTI_C machine Kconfig option was inserted in disorder. Fix it.
Signed-off-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Wilfred Mallawa <wilfred.mallawa@wdc.com>
Message-Id: <20221211030829.802437-4-bmeng@tinylab.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Since commit ef63100648 ("hw/riscv: opentitan: Update to the latest build")
the IBEX PLIC model was replaced with the SiFive PLIC model in the
'opentitan' machine but we forgot the add the dependency there.
Signed-off-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Wilfred Mallawa <wilfred.mallawa@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20221211030829.802437-3-bmeng@tinylab.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
hw/pci/Kconfig says MSI_NONBROKEN should be selected by interrupt
controllers regardless of how MSI is implemented. msi_nonbroken is
initialized to true in both riscv_aplic_realize() and
riscv_imsic_realize().
Select MSI_NONBROKEN in RISCV_APLIC and RISCV_IMSIC.
Signed-off-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221211030829.802437-2-bmeng@tinylab.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
hw/pci/Kconfig says MSI_NONBROKEN should be selected by interrupt
controllers regardless of how MSI is implemented. msi_nonbroken is
initialized to true in sifive_plic_realize().
Let SIFIVE_PLIC select MSI_NONBROKEN and drop the selection from
RISC-V machines.
Signed-off-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Wilfred Mallawa <wilfred.mallawa@wdc.com>
Message-Id: <20221211030829.802437-1-bmeng@tinylab.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
This patch adds support for the Zawrs ISA extension.
Given the current (incomplete) implementation of reservation sets
there seems to be no way to provide a full emulation of the WRS
instruction (wake on reservation set invalidation or timeout or
interrupt). Therefore, we just exit the TB and return to the main loop.
The specification can be found here:
https://github.com/riscv/riscv-zawrs/blob/main/zawrs.adoc
Note, that the Zawrs extension is frozen, but not ratified yet.
Changes since v3:
* Remove "RFC" since the extension is frozen
* Rebase on master and fix integration issues
* Fix entry ordering in extension list
Changes since v2:
* Rebase on master and resolve conflicts
* Adjustments according to a specification change
* Inline REQUIRE_ZAWRS() since it has only one user
Changes since v1:
* Adding zawrs to the ISA string that is passed to the kernel
Signed-off-by: Christoph Müllner <christoph.muellner@vrull.eu>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20221005144948.3421504-1-christoph.muellner@vrull.eu>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Since priv spec v1.12, MRET and SRET now clear mstatus.MPRV when
leaving M-mode.
Signed-off-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20221207090037.281452-2-bmeng@tinylab.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
There are 2 paths in helper_sret() and the same mstatus update codes
are replicated. Extract the common parts to simplify it a little bit.
Signed-off-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20221207090037.281452-1-bmeng@tinylab.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Failure to set pc_succ_insn may result in a TB covering zero bytes,
which triggers an assert within the code generator.
Cc: qemu-stable@nongnu.org
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1224
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221203175744.151365-1-richard.henderson@linaro.org>
[ Changes by AF:
- Add missing run-plugin-test-noc-% line
]
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The priv spec v1.12 says:
If no PMP entry matches an M-mode access, the access succeeds. If
no PMP entry matches an S-mode or U-mode access, but at least one
PMP entry is implemented, the access fails. Failed accesses generate
an instruction, load, or store access-fault exception.
At present the exception cause is set to 'illegal instruction' but
should have been 'instruction access fault'.
Fixes: d102f19a20 ("target/riscv/pmp: Raise exception if no PMP entry is configured")
Signed-off-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Wilfred Mallawa <wilfred.mallawa@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20221205065303.204095-1-bmeng@tinylab.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
If the number of interrupt is not multiple of 32, PLIC will have
out-of-bound access to source_priority array. Compute the number of
interrupt in the last word to avoid this out-of-bound access of array.
Signed-off-by: Jim Shu <jim.shu@sifive.com>
Reviewed-by: Bin Meng <bmeng@tinylab.org>
Message-Id: <20221127165753.30533-1-jim.shu@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The system controller on PolarFire SoC is access via a mailbox. The
control registers for this mailbox lie in the "IOSCB" region & the
interrupt is cleared via write to the "SYSREG" region. It also has a
QSPI controller, usually connected to a flash chip, that is used for
storing FPGA bitstreams and used for In-Application Programming (IAP).
Linux has an implementation of the system controller, through which the
hwrng is accessed, leading to load/store access faults.
Add the QSPI as unimplemented and a very basic (effectively
unimplemented) version of the system controller's mailbox. Rather than
purely marking the regions as unimplemented, service the mailbox
requests by reporting failures and raising the interrupt so a guest can
better handle the lack of support.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20221117225518.4102575-4-conor@kernel.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The Fabric Interconnect Controllers provide interfaces between the FPGA
fabric and the core complex. There are 5 FICs on PolarFire SoC, numbered
0 through 4. FIC2 is an AXI4 slave interface from the FPGA fabric and
does not show up on the MSS memory map. FIC4 is dedicated to the User
Crypto Processor and does not show up on the MSS memory map either.
FIC 0, 1 & 3 do show up in the MSS memory map and neither FICs 0 or 1
are represented in QEMU, leading to load access violations while booting
Linux for Icicle if PCIe is enabled as the root port is connected via
either FIC 0 or 1.
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Message-Id: <20221117225518.4102575-3-conor@kernel.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
On PolarFire SoC, some peripherals (eg the PCI root port) are clocked by
"Clock Conditioning Circuitry" in the FPGA. The specific clock depends
on the FPGA bitstream & can be locked to one particular {D,P}LL - in the
Icicle Kit Reference Design v2022.09 or later this is/will be the case.
Linux v6.1+ will have a driver for this peripheral and devicetrees that
previously relied on "fixed-frequency" clock nodes have been switched
over to clock-controller nodes. The IOSCB region is represented in QEMU,
but the specific region of it that the CCCs occupy has not so v6.1-rcN
kernels fail to boot in QEMU.
Add the regions as unimplemented so that the status-quo in terms of boot
is maintained.
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Message-Id: <20221117225518.4102575-2-conor@kernel.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
sstatus register dump is currently missing in riscv_cpu_dump_state().
As sstatus is a copy of mstatus, which is described in the priv spec,
it seems redundant to print the same information twice.
Add some comments for this to let people know this is intentional.
Signed-off-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20221125050354.3166023-1-bmeng@tinylab.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
let tlb_fill() function also increments PMU counter when it is from
two-stage translation, so QEMU could also monitor these PMU events when
CPU runs in VS/VU mode (like running guest OS).
Signed-off-by: Jim Shu <jim.shu@sifive.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20221123090635.6574-1-jim.shu@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The imsic DT binding[1] has changed and no longer require an ipi-id.
The latest IMSIC driver dynamically allocates ipi id if slow-ipi
is not defined.
Get rid of the unused dt property which may lead to confusion.
[1] https://lore.kernel.org/lkml/20221111044207.1478350-5-apatel@ventanamicro.com/
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20221122080529.1692533-1-atishp@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
We should use "&&" instead of "&" when checking hcounteren.TM and
henvcfg.STCE bits.
Fixes: 3ec0fe18a3 ("target/riscv: Add vstimecmp suppor")
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20221108125703.1463577-2-apatel@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Commit 40244040a7 changed the way the S irqs are numbered. This breaks when
using numa configuration, e.g.:
./qemu-system-riscv64 -nographic -machine virt,dumpdtb=numa-tree.dtb \
-m 2G -smp cpus=16 \
-object memory-backend-ram,id=mem0,size=512M \
-object memory-backend-ram,id=mem1,size=512M \
-object memory-backend-ram,id=mem2,size=512M \
-object memory-backend-ram,id=mem3,size=512M \
-numa node,cpus=0-3,memdev=mem0,nodeid=0 \
-numa node,cpus=4-7,memdev=mem1,nodeid=1 \
-numa node,cpus=8-11,memdev=mem2,nodeid=2 \
-numa node,cpus=12-15,memdev=mem3,nodeid=3
leads to:
Unexpected error in object_property_find_err() at ../qom/object.c:1304:
qemu-system-riscv64: Property 'riscv.sifive.plic.unnamed-gpio-out[8]' not
found
This patch makes the nubering of the S irqs identical to what it was before.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Frédéric Pétrot <frederic.petrot@univ-grenoble-alpes.fr>
Message-Id: <20221114135122.1668703-1-frederic.petrot@univ-grenoble-alpes.fr>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Avoid calling riscv_itrigger_enabled() when calculate the tbflags.
As the itrigger enable status can only be changed when write
tdata1, migration load or itrigger fire, update env->itrigger_enabled
at these places.
Signed-off-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20221013062946.7530-5-zhiwei_liu@linux.alibaba.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
When QEMU is not in icount mode, execute instruction one by one. The
tdata1 can be read directly.
When QEMU is in icount mode, use a timer to simulate the itrigger. The
tdata1 may be not right because of lazy update of count in tdata1. Thus,
We should pack the adjusted count into tdata1 before read it back.
Signed-off-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20221013062946.7530-4-zhiwei_liu@linux.alibaba.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The max count in itrigger can be 0x3FFF, which will cause a no trivial
translation and execution overload.
When icount is enabled, QEMU provides API that can fetch guest
instruction number. Thus, we can set an timer for itrigger with
the count as deadline.
Only when timer expires or priviledge mode changes, do lazy update
to count.
Signed-off-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20221013062946.7530-3-zhiwei_liu@linux.alibaba.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
When icount is not enabled, there is no API in QEMU that can get the
guest instruction number.
Translate the guest code in a way that each TB only has one instruction.
After executing the instruction, decrease the count by 1 until it reaches 0
where the itrigger fires.
Note that only when priviledge matches the itrigger configuration,
the count will decrease.
Signed-off-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20221013062946.7530-2-zhiwei_liu@linux.alibaba.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
This patch adds a mechanism to generate a virtual instruction
instruction exception instead of an illegal instruction exception
during instruction decode when virt is enabled.
Signed-off-by: Mayuresh Chitale <mchitale@ventanamicro.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20221016124726.102129-4-mchitale@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Accesses to henvcfg, henvcfgh and senvcfg are allowed only if the corresponding
bit in mstateen0/hstateen0 is enabled. Otherwise an illegal instruction trap is
generated.
Signed-off-by: Mayuresh Chitale <mchitale@ventanamicro.com>
Reviewed-by: Weiwei Li<liweiwei@iscas.ac.cn>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20221016124726.102129-3-mchitale@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Smstateen extension specifies a mechanism to close
the potential covert channels that could cause security issues.
This patch adds the CSRs defined in the specification and
the corresponding predicates and read/write functions.
Signed-off-by: Mayuresh Chitale <mchitale@ventanamicro.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20221016124726.102129-2-mchitale@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Adds the updated `aon_timer` base as an unimplemented device. This is
used by TockOS, patch ensures the guest doesn't hit load faults.
Signed-off-by: Wilfred Mallawa <wilfred.mallawa@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20221025043335.339815-3-wilfred.mallawa@opensource.wdc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
This patch updates the OpenTitan model to match
the specified register layout as per [1]. Which is also the latest
commit of OpenTitan supported by TockOS.
Note: Pinmux and Padctrl has been merged into Pinmux [2][3], this patch removes
any references to Padctrl. Note: OpenTitan doc [2] has not yet specified
much detail regarding this, except for a note that states `TODO: this
section needs to be updated to reflect the pinmux/padctrl merger`
[1] d072ac505f/hw/top_earlgrey/sw/autogen/top_earlgrey_memory.h
[2] https://docs.opentitan.org/hw/top_earlgrey/doc/design/
[3] https://docs.opentitan.org/hw/ip/pinmux/doc/#overview
Signed-off-by: Wilfred Mallawa <wilfred.mallawa@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Message-Id: <20221025043335.339815-2-wilfred.mallawa@opensource.wdc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
When guest_base != 0, we were not coordinating the usage of
TCG_REG_TMP0 as base properly, leading to a previous zero-extend
of the input address being discarded.
Shuffle the alignment check to the front, because that does not
depend on the zero-extend, and it keeps the register usage clear.
Set base after each step of the address arithmetic instead of before.
Return the base register used from tcg_out_tlb_load, so as to
keep that register choice localized to that function.
Reported-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20221023233337.2846860-1-richard.henderson@linaro.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
There was a typo using opc_addi instead of opc_add with the
two registers. While we're at it, simplify the gating test
to al == bl to improve dynamic scheduling even when the
output register does not overlap the inputs.
Reported-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20221020233836.2341671-1-richard.henderson@linaro.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
We were matching a signed 13-bit range, not a 12-bit range.
Expand the commentary within the function and be explicit
about all of the ranges.
Reported-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20221022095821.2441874-1-richard.henderson@linaro.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Only the pmp index that be checked by pmp_hart_has_privs can be used
by pmp_get_tlb_size to avoid an error pmp index.
Before modification, we may use an error pmp index. For example,
we check address 0x4fc, and the size 0x4 in pmp_hart_has_privs. If there
is an pmp rule, valid range is [0x4fc, 0x500), then pmp_hart_has_privs
will return true;
However, this checked pmp index is discarded as pmp_hart_has_privs
return bool value. In pmp_is_range_in_tlb, it will traverse all pmp
rules. The tlb_sa will be 0x0, and tlb_ea will be 0xfff. If there is
a pmp rule [0x10, 0x14), it will be misused as it is legal in
pmp_get_tlb_size.
As we have already known the correct pmp index, just remove the
remove the pmp_is_range_in_tlb and get tlb size directly from
pmp_get_tlb_size.
Signed-off-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20221012060016.30856-1-zhiwei_liu@linux.alibaba.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
"Host Memory Backends" and "Memory devices" queue ("mem"):
- virtio-mem fixes
- Use new MPOL_PREFERRED_MANY mbind() policy for memory backends if
possible
-----BEGIN PGP SIGNATURE-----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=aVS3
-----END PGP SIGNATURE-----
Merge tag 'mem-2023-01-02' of https://github.com/davidhildenbrand/qemu into staging
Hi,
"Host Memory Backends" and "Memory devices" queue ("mem"):
- virtio-mem fixes
- Use new MPOL_PREFERRED_MANY mbind() policy for memory backends if
possible
# gpg: Signature made Mon 02 Jan 2023 11:22:04 GMT
# gpg: using RSA key 1BD9CAAD735C4C3A460DFCCA4DDE10F700FF835A
# gpg: issuer "david@redhat.com"
# gpg: Good signature from "David Hildenbrand <david@redhat.com>" [marginal]
# gpg: aka "David Hildenbrand <davidhildenbrand@gmail.com>" [full]
# gpg: aka "David Hildenbrand <hildenbr@in.tum.de>" [unknown]
# Primary key fingerprint: 1BD9 CAAD 735C 4C3A 460D FCCA 4DDE 10F7 00FF 835A
* tag 'mem-2023-01-02' of https://github.com/davidhildenbrand/qemu:
hostmem: Honor multiple preferred nodes if possible
virtio-mem: Fix typo in function name
virtio-mem: Fix the iterator variable in a vmem->rdl_list loop
virtio-mem: Fix the bitmap index of the section offset
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The windows jobs (especially the 32-bit job) recently started to
hit the timeout limit. Bump it a little bit to ease the situation
(80 minutes is quite long already - OTOH, these jobs do not have to
wait for a job from the container stage to finish, so this should
still be OK).
Additionally, some update on the container side recently enabled
OpenGL in these jobs - but the corresponding code fails to compile.
Thus disable OpenGL here for the time being until someone figured
out the proper fix in the shader code for this.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20230104123559.277586-1-thuth@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Newer flake8 versions are a bit pickier about the config file, and my
in-line comment confuses the parser. Fix it.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Wilfred Mallawa <wilfred.mallawa@wdc.com>
Message-id: 20221203005234.620788-2-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
If we request a shutdown of a VM without a QMP console, we'll just hang
waiting. Not ideal.
Add in code that attempts graceful termination in these cases. Tested
lightly; it appears to work and I doubt we rely on this case anywhere,
but it's a corner you're allowed to wedge yourself in, so it should be
handled.
Signed-off-by: John Snow <jsnow@redhat.com>
When key decisions are made about the lifetime of the VM process being
managed, there's no log entry. Juxtaposed with the very verbose runstate
change logging of the QMP module, machine seems a bit too introverted
now.
Season the machine.py module with logging statements to taste to help
make a tastier soup.
Signed-off-by: John Snow <jsnow@redhat.com>
- fix minor shell-ism that can break check-tcg
- turn off verbose logging on custom runners
- make configure echo call in CI
- fix unused variable in linux-test
- add binary compiler docker image for hexagon
- disable doc and gui builds for tci and disable-tcg builds
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAmOlxtEACgkQ+9DbCVqe
KkR/VwgAlgPHfM4JQoG320kWNd/TuB/9NOaBSD/VINyx+uDlbix4NZ16Ij6I6JaG
mOxOAg1RVVUipul7lz4LTh8caKr5c4S+70hZlLxiKSbqkxUlqAdE0TLO88f1xx6q
qBrVQj5YoWBLH0sgsLj+QHhCpP8IGYl/hFjzYA0xbnllt15uiYXoHshBh8/YODnX
UjgGvzABoqlnEh/QD3pT8B5VyCUbF8j46CWWOV+XPSbRrf1FnrNgFIn5kdOJt+jE
cjPaMZSTpP4W5qZWB7xQNhQdBZvnKQV95gUvtEwdmwlpCr8rDfYsRcI8qRpAbHeL
XaDwHuG7Uo9OQf++4K9voH7TptAcqQ==
=0Yp9
-----END PGP SIGNATURE-----
Merge tag 'pull-testing-next-231222-1' of https://gitlab.com/stsquad/qemu into staging
testing updates:
- fix minor shell-ism that can break check-tcg
- turn off verbose logging on custom runners
- make configure echo call in CI
- fix unused variable in linux-test
- add binary compiler docker image for hexagon
- disable doc and gui builds for tci and disable-tcg builds
# gpg: Signature made Fri 23 Dec 2022 15:18:41 GMT
# gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [full]
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44
* tag 'pull-testing-next-231222-1' of https://gitlab.com/stsquad/qemu:
gitlab-ci: Disable docs and GUIs for the build-tci and build-tcg-disabled jobs
tests/docker: use prebuilt toolchain for debian-hexagon-cross
tests/tcg: fix unused variable in linux-test
configure: repeat ourselves for the benefit of CI
gitlab: turn off verbose logging for make check on custom runners
configure: Fix check-tcg not executing any tests
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* Next preparatory patches for upcoming Windows host support.
* Cleanup patches.
-----BEGIN PGP SIGNATURE-----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=3XCu
-----END PGP SIGNATURE-----
Merge tag 'pull-9p-20221223' of https://github.com/cschoenebeck/qemu into staging
9pfs: Windows host prep, cleanup
* Next preparatory patches for upcoming Windows host support.
* Cleanup patches.
# gpg: Signature made Fri 23 Dec 2022 11:04:26 GMT
# gpg: using RSA key 96D8D110CF7AF8084F88590134C2B58765A47395
# gpg: issuer "qemu_oss@crudebyte.com"
# gpg: Good signature from "Christian Schoenebeck <qemu_oss@crudebyte.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: ECAB 1A45 4014 1413 BA38 4926 30DB 47C3 A012 D5F4
# Subkey fingerprint: 96D8 D110 CF7A F808 4F88 5901 34C2 B587 65A4 7395
* tag 'pull-9p-20221223' of https://github.com/cschoenebeck/qemu:
hw/9pfs: Replace the direct call to xxxat() APIs with a wrapper
hw/9pfs: Drop unnecessary *xattr wrapper API declarations
qemu/xattr.h: Exclude <sys/xattr.h> for Windows
MAINTAINERS: Add 9p test client to section "virtio-9p"
9pfs: Fix some return statements in the synth backend
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
If a memory-backend is configured with mode
HOST_MEM_POLICY_PREFERRED then
host_memory_backend_memory_complete() calls mbind() as:
mbind(..., MPOL_PREFERRED, nodemask, ...);
Here, 'nodemask' is a bitmap of host NUMA nodes and corresponds
to the .host-nodes attribute. Therefore, there can be multiple
nodes specified. However, the documentation to MPOL_PREFERRED
says:
MPOL_PREFERRED
This mode sets the preferred node for allocation. ...
If nodemask specifies more than one node ID, the first node
in the mask will be selected as the preferred node.
Therefore, only the first node is honored and the rest is
silently ignored. Well, with recent changes to the kernel and
numactl we can do better.
The Linux kernel added in v5.15 via commit cfcaa66f8032
("mm/hugetlb: add support for mempolicy MPOL_PREFERRED_MANY")
support for MPOL_PREFERRED_MANY, which accepts multiple preferred
NUMA nodes instead.
Then, numa_has_preferred_many() API was introduced to numactl
(v2.0.15~26) allowing applications to query kernel support.
Wiring this all together, we can pass MPOL_PREFERRED_MANY to the
mbind() call instead and stop ignoring multiple nodes, silently.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Message-Id: <a0b4adce1af5bd2344c2218eb4a04b3ff7bcfdb4.1671097918.git.mprivozn@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221228130956.80515-1-philmd@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
It should be the variable rdl2 to revert the already-notified listeners.
Fixes: 2044969f0b ("virtio-mem: Implement RamDiscardManager interface")
Signed-off-by: Chenyi Qiang <chenyi.qiang@intel.com>
Message-Id: <20221228090312.17276-1-chenyi.qiang@intel.com>
Cc: qemu-stable@nongnu.org
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
