This patch makes the mirror code differentiate between simply waiting
for any operation to complete (mirror_wait_for_free_in_flight_slot())
and specifically waiting for all operations touching a certain range of
the virtual disk to complete (mirror_wait_on_conflicts()).
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Message-id: 20180613181823.13618-5-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Attach a CoQueue to each in-flight operation so if we need to wait for
any we can use it to wait instead of just blindly yielding and hoping
for some operation to wake us.
A later patch will use this infrastructure to allow requests accessing
the same area of the virtual disk to specifically wait for each other.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Message-id: 20180613181823.13618-4-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
In order to talk to the source BDS (and maybe in the future to the
target BDS as well) directly, we need to convert our existing AIO
requests into coroutine I/O requests.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Message-id: 20180613181823.13618-3-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
When converting mirror's I/O to coroutines, we are going to need a point
where these coroutines are created. mirror_perform() is going to be
that point.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-id: 20180613181823.13618-2-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
We already requested that block jobs be paused in .bdrv_drained_begin,
but no guarantee was made that the job was actually inactive at the
point where bdrv_drained_begin() returned.
This introduces a new callback BdrvChildRole.bdrv_drained_poll() and
uses it to make bdrv_drain_poll() consider block jobs using the node to
be drained.
For the test case to work as expected, we have to switch from
block_job_sleep_ns() to qemu_co_sleep_ns() so that the test job is even
considered active and must be waited for when draining the node.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
So far we relied on job->ret and strerror() to produce an error message
for failed jobs. Not surprisingly, this tends to result in completely
useless messages.
This adds a Job.error field that can contain an error string for a
failing job, and a parameter to job_completed() that sets the field. As
a default, if NULL is passed, we continue to use strerror(job->ret).
All existing callers are changed to pass NULL. They can be improved in
separate patches.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
BlockJob has fields .offset and .len, which are actually misnomers today
because they are no longer tied to block device sizes, but just progress
counters. As such they make a lot of sense in generic Jobs.
This patch moves the fields to Job and renames them to .progress_current
and .progress_total to describe their function better.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
The transition to the READY state was still performed in the BlockJob
layer, in the same function that sent the BLOCK_JOB_READY QMP event.
This patch brings the state transition to the Job layer and implements
the QMP event using a notifier called from the Job layer, like we
already do for other events related to state transitions.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
This moves the .complete callback that tells a READY job to complete
from BlockJobDriver to JobDriver. The wrapper function job_complete()
doesn't require anything block job specific any more and can be moved
to Job.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
block_job_drain() contains a blk_drain() call which cannot be moved to
Job, so add a new JobDriver callback JobDriver.drain which has a common
implementation for all BlockJobs. In addition to this we keep the
existing BlockJobDriver.drain callback that is called by the common
drain implementation for all block jobs.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
block_job_cancel_async() did two things that were still block job
specific:
* Setting job->force. This field makes sense on the Job level, so we can
just move it. While at it, rename it to job->force_cancel to make its
purpose more obvious.
* Resetting the I/O status. This can't be moved because generic Jobs
don't have an I/O status. What the function really implements is a
user resume, except without entering the coroutine. Consequently, it
makes sense to call the .user_resume driver callback here which
already resets the I/O status.
The old block_job_cancel_async() has two separate if statements that
check job->iostatus != BLOCK_DEVICE_IO_STATUS_OK and job->user_paused.
However, the former condition always implies the latter (as is
asserted in block_job_iostatus_reset()), so changing the explicit call
of block_job_iostatus_reset() on the former condition with the
.user_resume callback on the latter condition is equivalent and
doesn't need to access any BlockJob specific state.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
This moves the finalisation of a single job from BlockJob to Job.
Some part of this code depends on job transactions, and job transactions
call this code, we introduce some temporary calls from Job functions to
BlockJob ones. This will be fixed once transactions move to Job, too.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
This renames the BlockJobCreateFlags constants, moves a few JOB_INTERNAL
checks to job_create() and the auto_{finalize,dismiss} fields from
BlockJob to Job.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
While we already moved the state related to job pausing to Job, the
functions to do were still BlockJob only. This commit moves them over to
Job.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
There is nothing block layer specific about block_job_sleep_ns(), so
move the function to Job.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
This commit moves some core functions for dealing with the job coroutine
from BlockJob to Job. This includes primarily entering the coroutine
(both for the first and reentering) and yielding explicitly and at pause
points.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Move the defer_to_main_loop functionality from BlockJob to Job.
The code can be simplified because we can use job->aio_context in
job_defer_to_main_loop_bh() now, instead of having to access the
BlockDriverState.
Probably taking the data->aio_context lock in addition was already
unnecessary in the old code because we didn't actually make use of
anything protected by the old AioContext except getting the new
AioContext, in case it changed between scheduling the BH and running it.
But it's certainly unnecessary now that the BDS isn't accessed at all
any more.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
We cannot yet move the whole logic around job cancelling to Job because
it depends on quite a few other things that are still only in BlockJob,
but we can move the cancelled field at least.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
This moves reference counting from BlockJob to Job.
In order to keep calling the BlockJob cleanup code when the job is
deleted via job_unref(), introduce a new JobDriver.free callback. Every
block job must use block_job_free() for this callback, this is asserted
in block_job_create().
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
This moves the job_type field from BlockJobDriver to JobDriver.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
QAPI types aren't externally visible, so we can rename them without
causing problems. Before we add a job type to Job, rename the enum
so it can be used for more than just block jobs.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
This is the first step towards creating an infrastructure for generic
background jobs that aren't tied to a block device. For now, Job only
stores its ID and JobDriver, the rest stays in BlockJob.
The following patches will move over more parts of BlockJob to Job if
they are meaningful outside the context of a block job.
BlockJob.driver is now redundant, but this patch leaves it around to
avoid unnecessary churn. The next patches will get rid of almost all of
its uses anyway so that it can be removed later with much less churn.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Update the rest of the filter drivers to support
BDRV_REQ_WRITE_UNCHANGED. They already forward write request flags to
their children, so we just have to announce support for it.
This patch does not cover the replication driver because that currently
does not support flags at all, and because it just grabs the WRITE
permission for its children when it can, so we should be fine just
submitting the incoming WRITE_UNCHANGED requests as normal writes.
It also does not cover format drivers for similar reasons. They all use
bdrv_format_default_perms() as their .bdrv_child_perm() implementation
so they just always grab the WRITE permission for their file children
whenever possible. In addition, it often would be difficult to
ascertain whether incoming unchanging writes end up as unchanging writes
in their files. So we just leave them as normal potentially changing
writes.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-id: 20180421132929.21610-7-mreitz@redhat.com
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
This gets us rid of more direct accesses to BlockJob fields from the
job drivers.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
All block job drivers support .set_speed and all of them duplicate the
same code to implement it. Move that code to blockjob.c and remove the
now useless callback.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Every block job has a RateLimit, and they all do the exact same thing
with it, so it should be common infrastructure. Move the struct field
for a start.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Block job drivers are not expected to mess with the internals of the
BlockJob object, so provide wrapper functions for one of the cases where
they still do it: Updating the progress counter.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Commit b76e4458b1 made the mirror block
job respect block-job-cancel's @force flag: With that flag set, it would
now always really cancel, even post-READY.
Unfortunately, it had a side effect: Without that flag set, it would now
never cancel, not even before READY. Considering that is an
incompatible change and not noted anywhere in the commit or the
description of block-job-cancel's @force parameter, this seems
unintentional and we should revert to the previous behavior, which is to
immediately cancel the job when block-job-cancel is called before source
and target are in sync (i.e. before the READY event).
Cc: qemu-stable@nongnu.org
Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=1572856
Reported-by: Yanan Fu <yfu@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20180501220509.14152-2-mreitz@redhat.com
Reviewed-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Jeff Cody <jcody@redhat.com>
Commit b76e4458b1 ("block/mirror: change
the semantic of 'force' of block-job-cancel") accidentally removed the
ratelimit in the mirror job.
Reintroduce the ratelimit but keep the block-job-cancel force=true
behavior that was added in commit
b76e4458b1.
Note that block_job_sleep_ns() returns immediately when the job is
cancelled. Therefore it's safe to unconditionally call
block_job_sleep_ns() - a cancelled job does not sleep.
This commit fixes the non-deterministic qemu-iotests 185 output. The
test relies on the ratelimit to make the job sleep until the 'quit'
command is processed. Previously the job could complete before the
'quit' command was received since there was no ratelimit.
Cc: Liang Li <liliang.opensource@gmail.com>
Cc: Jeff Cody <jcody@redhat.com>
Cc: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20180424123527.19168-1-stefanha@redhat.com
Signed-off-by: Jeff Cody <jcody@redhat.com>
When doing drive mirror to a low speed shared storage, if there was heavy
BLK IO write workload in VM after the 'ready' event, drive mirror block job
can't be canceled immediately, it would keep running until the heavy BLK IO
workload stopped in the VM.
Libvirt depends on the current block-job-cancel semantics, which is that
when used without a flag after the 'ready' event, the command blocks
until data is in sync. However, these semantics are awkward in other
situations, for example, people may use drive mirror for realtime
backups while still wanting to use block live migration. Libvirt cannot
start a block live migration while another drive mirror is in progress,
but the user would rather abandon the backup attempt as broken and
proceed with the live migration than be stuck waiting for the current
drive mirror backup to finish.
The drive-mirror command already includes a 'force' flag, which libvirt
does not use, although it documented the flag as only being useful to
quit a job which is paused. However, since quitting a paused job has
the same effect as abandoning a backup in a non-paused job (namely, the
destination file is not in sync, and the command completes immediately),
we can just improve the documentation to make the force flag obviously
useful.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Jeff Cody <jcody@redhat.com>
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: Max Reitz <mreitz@redhat.com>
Cc: Eric Blake <eblake@redhat.com>
Cc: John Snow <jsnow@redhat.com>
Reported-by: Huaitong Han <huanhuaitong@didichuxing.com>
Signed-off-by: Huaitong Han <huanhuaitong@didichuxing.com>
Signed-off-by: Liang Li <liliangleo@didichuxing.com>
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
model all independent jobs as single job transactions.
It's one less case we have to worry about when we add more states to the
transition machine. This way, we can just treat all job lifetimes exactly
the same. This helps tighten assertions of the STM graph and removes some
conditionals that would have been needed in the coming commits adding a
more explicit job lifetime management API.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We are gradually moving away from sector-based interfaces, towards
byte-based. Update the generic helpers, and all passthrough clients
(blkdebug, commit, mirror, throttle) accordingly.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
All callers are using QEMU_CLOCK_REALTIME, and it will not be possible to
support more than one clock when block_job_sleep_ns switches to a single
timer stored in the BlockJob struct.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Tested-By: Jeff Cody <jcody@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We are gradually moving away from sector-based interfaces, towards
byte-based. In the common case, allocation is unlikely to ever use
values that are not naturally sector-aligned, but it is possible
that byte-based values will let us be more precise about allocation
at the end of an unaligned file that can do byte-based access.
Changing the name of the function from bdrv_get_block_status_above()
to bdrv_block_status_above() ensures that the compiler enforces that
all callers are updated. Likewise, since it a byte interface allows
an offset mapping that might not be sector aligned, split the mapping
out of the return value and into a pass-by-reference parameter. For
now, the io.c layer still assert()s that all uses are sector-aligned,
but that can be relaxed when a later patch implements byte-based
block status in the drivers.
For the most part this patch is just the addition of scaling at the
callers followed by inverse scaling at bdrv_block_status(), plus
updates for the new split return interface. But some code,
particularly bdrv_block_status(), gets a lot simpler because it no
longer has to mess with sectors. Likewise, mirror code no longer
computes s->granularity >> BDRV_SECTOR_BITS, and can therefore drop
an assertion about alignment because the loop no longer depends on
alignment (never mind that we don't really have a driver that
reports sub-sector alignments, so it's not really possible to test
the effect of sub-sector mirroring). Fix a neighboring assertion to
use is_power_of_2 while there.
For ease of review, bdrv_get_block_status() was tackled separately.
Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
In the process of converting sector-based interfaces to bytes,
I'm finding it easier to represent a byte count as a 64-bit
integer at the block layer (even if we are internally capped
by SIZE_MAX or even INT_MAX for individual transactions, it's
still nicer to not have to worry about truncation/overflow
issues on as many variables). Update the signature of
bdrv_round_to_clusters() to uniformly use int64_t, matching
the signature already chosen for bdrv_is_allocated and the
fact that off_t is also a signed type, then adjust clients
according to the required fallout (even where the result could
now exceed 32 bits, no client is directly assigning the result
into a 32-bit value without breaking things into a loop first).
Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Not all callers care about which BDS owns the mapping for a given
range of the file. This patch merely simplifies the callers by
consolidating the logic in the common call point, while guaranteeing
a non-NULL file to all the driver callbacks, for no semantic change.
The only caller that does not care about pnum is bdrv_is_allocated,
as invoked by vvfat; we can likewise add assertions that the rest
of the stack does not have to worry about a NULL pnum.
Furthermore, this will also set the stage for a future cleanup: when
a caller does not care about which BDS owns an offset, it would be
nice to allow the driver to optimize things to not have to return
BDRV_BLOCK_OFFSET_VALID in the first place. In the case of fragmented
allocation (for example, it's fairly easy to create a qcow2 image
where consecutive guest addresses are not at consecutive host
addresses), the current contract requires bdrv_get_block_status()
to clamp *pnum to the limit where host addresses are no longer
consecutive, but allowing a NULL file means that *pnum could be
set to the full length of known-allocated data.
Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Backing may be zero after failed bdrv_append in mirror_start_job,
which leads to SIGSEGV.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20170929152255.5431-1-vsementsov@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Backing may be zero after failed bdrv_attach_child in
bdrv_set_backing_hd, which leads to SIGSEGV.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20170928120300.58164-1-vsementsov@virtuozzo.com
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Now that we have adjusted the majority of the calls this function
makes to be byte-based, it is easier to read the code if it makes
passes over the image using bytes rather than sectors.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Some of the callers were already scaling bytes to sectors; others
can be easily converted to pass byte offsets, all in our shift
towards a consistent byte interface everywhere. Making the change
will also make it easier to write the hold-out callers to use byte
rather than sectors for their iterations; it also makes it easier
for a future dirty-bitmap patch to offload scaling over to the
internal hbitmap. Although all callers happen to pass
sector-aligned values, make the internal scaling robust to any
sub-sector requests.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Half the callers were already scaling bytes to sectors; the other
half can eventually be simplified to use byte iteration. Both
callers were already using the result as a bool, so make that
explicit. Making the change also makes it easier for a future
dirty-bitmap patch to offload scaling over to the internal hbitmap.
Remember, asking whether a byte is dirty is effectively asking
whether the entire granularity containing the byte is dirty, since
we only track dirtiness by granularity.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Thanks to recent cleanups, all callers were scaling a return value
of sectors into bytes; do the scaling internally instead.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Thanks to recent cleanups, most callers were scaling a return value
of sectors into bytes (the exception, in qcow2-bitmap, will be
converted to byte-based iteration later). Update the interface to
do the scaling internally instead.
In qcow2-bitmap, the code was specifically checking for an error
return of -1. To avoid a regression, we either have to make sure
we continue to return -1 (rather than a scaled -512) on error, or
we have to fix the caller to treat all negative values as error
rather than just one magic value. It's easy enough to make both
changes at the same time, even though either one in isolation
would work.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
All callers to bdrv_dirty_iter_new() passed 0 for their initial
starting point, drop that parameter.
Most callers to bdrv_set_dirty_iter() were scaling a byte offset to
a sector number; the exception qcow2-bitmap will be converted later
to use byte rather than sector iteration. Move the scaling to occur
internally to dirty bitmap code instead, so that callers now pass
in bytes.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
In the context of bdrv_reopen(), we'll have to look at the state of the
graph as it will be after the reopen. This interface addition is in
preparation for the change.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
bdrv_co_get_block_status_from_file() and
bdrv_co_get_block_status_from_backing() set *file to bs->file and
bs->backing respectively, so that bdrv_co_get_block_status() can recurse
to them. Future block drivers won't have to duplicate code to implement
this.
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Manos Pitsidianakis <el13635@mail.ntua.gr>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Commits 0db832f and 6cdbceb introduced the automatic insertion of filter
nodes above the top layer of mirror and commit block jobs. The
assumption made there was that since libvirt doesn't do node-level
management of the block layer yet, it shouldn't be affected by added
nodes.
This is true as far as commands issued by libvirt are concerned. It only
uses BlockBackend names to address nodes, so any operations it performs
still operate on the root of the tree as intended.
However, the assumption breaks down when you consider query commands,
which return data for the wrong node now. These commands also return
information on some child nodes (bs->file and/or bs->backing), which
libvirt does make use of, and which refer to the wrong nodes, too.
One of the consequences is that oVirt gets wrong information about the
image size and stops the VM in response as long as a mirror or commit
job is running:
https://bugzilla.redhat.com/show_bug.cgi?id=1470634
This patch fixes the problem by hiding the implicit nodes created
automatically by the mirror and commit block jobs in the output of
query-block and BlockBackend-based query-blockstats as long as the user
doesn't indicate that they are aware of those nodes by providing a node
name for them in the QMP command to start the block job.
The node-based commands query-named-block-nodes and query-blockstats
with query-nodes=true still show all nodes, including implicit ones.
This ensures that users that are capable of node-level management can
still access the full information; users that only know BlockBackends
won't use these commands.
Cc: qemu-stable@nongnu.org
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Tested-by: Eric Blake <eblake@redhat.com>
