The device provides an ISA bus so that pseries can also run the
endianness test.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Message-id: 1374501278-31549-24-git-send-email-pbonzini@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The device provides an ISA bus to run the endianness test on.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Message-id: 1374501278-31549-23-git-send-email-pbonzini@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This will let these machines run an endianness test for ISA
I/O port space.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Message-id: 1374501278-31549-22-git-send-email-pbonzini@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
It is not used anymore.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Message-id: 1374501278-31549-15-git-send-email-pbonzini@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
pci-hotplug.c and the CONFIG_PCI_HOTPLUG variable which controls its
compilation are misnamed. They're not about PCI hotplug in general, but
rather about the pci_add/pci_del interface which are now deprecated in
favour of the more general device_add/device_del interface. This patch
therefore renames them to pci-hotplug-old.c and CONFIG_PCI_HOTPLUG_OLD.
CONFIG_PCI_HOTPLUG=y was listed twice in {i386,x86_64}-softmmu.make for no
particular reason, so we clean that up too. In addition it was included in
ppc64-softmmu.mak for which the old hotplug interface was never used and is
unsuitable, so we remove that too.
Most of pci-hotplug.c was additionaly protected by #ifdef TARGET_I386. The
small piece which wasn't is only called from the pci_add and pci_del hooks
in hmp-commands.hx, which themselves were protected by #ifdef TARGET_I386.
This patch therefore also removes the #ifdef from pci-hotplug-old.c,
and changes the ifdefs in hmp-commands.hx to use CONFIG_PCI_HOTPLUG_OLD.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Enables support for the in-kernel MPIC that thas been merged into the
KVM next branch. This includes irqfd/KVM_IRQ_LINE support from Alex
Graf (along with some other improvements).
Note from Alex regarding kvm_irqchip_create():
On x86, one would call kvm_irqchip_create() to initialize an
in-kernel interrupt controller. That function then goes ahead and
initializes global capability variables as well as the default irq
routing table.
On ppc, we can't call kvm_irqchip_create() because we can have
different types of interrupt controllers. So we want to do all the
things that function would do for us in the in-kernel device init
handler.
Signed-off-by: Scott Wood <scottwood@freescale.com>
[agraf: squash in kvm_irqchip_commit_routes patch, fix non-kvm build,
fix ppcemb]
Signed-off-by: Alexander Graf <agraf@suse.de>
Initial commit for emulated Non-Volatile-Memory Express (NVMe) pci
storage device.
NVMe is an open, industry driven storage specification defining
an optimized register and command set designed to deliver the full
capabilities of non-volatile memory on PCIe SSDs. Further information
may be found on the organizations website at:
http://www.nvmexpress.org/
This commit implements the minimum from the specification to work with
existing drivers.
Cc: Keith Busch <keith.busch@gmail.com>
Signed-off-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Now that we know we're compiling with libfdt we can remove the
CONFIG_FDT conditionals.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Tested-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Message-id: 1369409217-7553-5-git-send-email-peter.maydell@linaro.org
...or they will bitrot to death.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Message-id: 5181234A.6060504@web.de
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Provides a hotpluggable bus for APIC and CPU.
* icc-bridge will serve as a parent for icc-bus and provide
mmio mapping services to child icc-devices.
* icc-device will replace SysBusDevice as a parent of APIC
and IOAPIC devices.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
pvpanic device is used to send guest panic event from guest to qemu.
When guest panic happens, pvpanic device driver will write a event
number to IO port 0x505(which is the IO port occupied by pvpanic device,
by default). On receiving the event, pvpanic device will pause guest
cpu(s), and send a qmp event QEVENT_GUEST_PANICKED.
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-id: b66077a40235b3531632a05a6ff373850afc7d2e.1366945969.git.hutao@cn.fujitsu.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
# By Paolo Bonzini (5) and others
# Via Paolo Bonzini
* bonzini/scsi-next:
vhost-scsi-s390: new device supporting the tcm_vhost Linux kernel module
vhost-scsi-ccw: new device supporting the tcm_vhost Linux kernel module
vhost-scsi-pci: new device supporting the tcm_vhost Linux kernel module
vhost-scsi: new device supporting the tcm_vhost Linux kernel module
virtio: simplify Makefile conditionals
virtio-scsi: create VirtIOSCSICommon
vhost: Add vhost_commit callback for SeaBIOS ROM region re-mapping
scsi: VMWare PVSCSI paravirtual device implementation
scsi: avoid assertion failure on VERIFY command
Message-id: 1366381460-6041-1-git-send-email-pbonzini@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This adds a new device that we can use for testing PCI PIO and MMIO, with and
without ioeventfd in different configurations. FAST_MMIO will be added if/when
kvm supports it. Also included are minor cleanups in kvm APIs that it needs.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.13 (GNU/Linux)
iQEcBAABAgAGBQJRbIJQAAoJECgfDbjSjVRpQuoH/RfMHb6YYfsuwJKUsjCKxhdr
695YqNsBLmh7E/+wr1dwUsKrMGSF97VSGAIPeX0u4wwP6jrORhA9iycCevXYlh/S
O7RTcePqVEQrwnMX5rOAEWGARVzg4hAT8i4Pdza1A+gBvaO/WLZIVJfUOHBAZNL7
2TTDymfixipErcTcxckITHfaShn9ajZgt/Yo8oVX70VqklWU+OEU/tYEXmvTC0H3
bTuTU3vpeAlCubF0AHHZqWA9g7myrKMCxwv4LWx7gmQGXoyQesy4s5C9KMrld1On
RovLw0REbtjB2xGjAj3g82ESK5eoi295Th/E7Fu1NJNYyDyfhxB7/cnbRa+Wpsg=
=jvZE
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'mst/tags/for_anthony' into staging
pci: add pci test device
This adds a new device that we can use for testing PCI PIO and MMIO, with and
without ioeventfd in different configurations. FAST_MMIO will be added if/when
kvm supports it. Also included are minor cleanups in kvm APIs that it needs.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Mon 15 Apr 2013 05:42:24 PM CDT using RSA key ID D28D5469
# gpg: Can't check signature: public key not found
# By Michael S. Tsirkin
# Via Michael S. Tsirkin
* mst/tags/for_anthony:
pci: add pci test device
kvm: support non datamatch ioeventfd
kvm: support any size for pio eventfd
kvm: remove unused APIs
Message-id: cover.1366272004.git.mst@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Dmitry Fleytman <dmitry@daynix.com>
Signed-off-by: Yan Vugenfirer <yan@daynix.com>
[ Rename files to vmw_pvscsi, fix setting of hostStatus in
pvscsi_request_cancelled - Paolo ]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This device is used for kvm unit tests,
currently it supports testing performance of ioeventfd.
Using updated kvm unittest, here's an example output:
mmio-no-eventfd:pci-mem 8796
mmio-wildcard-eventfd:pci-mem 3609
mmio-datamatch-eventfd:pci-mem 3685
portio-no-eventfd:pci-io 5287
portio-wildcard-eventfd:pci-io 1762
portio-datamatch-eventfd:pci-io 1777
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
A non-native i386 or x86_64 emulator should not have TPM passthrough
support, since the TPM is only present for those hosts.
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Commit 0434e30afb accidentally removed
the compilation of arm11mpcore.c.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This is a regression introduced by c0907c9e64. How to reproduce:
$ qemu-system-x86_64 -nodefaults -vnc :0 -M q35
qemu-system-x86_64: Unknown device 'q35-pcihost' for default sysbus
Aborted (core dumped)
Tested-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Device model for Primecell PL330 DMA controller.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Kirill Batuzov <batuzovk@ispras.ru>
Tested-by: Igor Mitsyanko <i.mitsyanko@samsung.com>
Reviewed-by: Igor Mitsyanko <i.mitsyanko@samsung.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 098aac26233d7334bed2bca4f06f539638ca6d24.1361853677.git.peter.crosthwaite@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Build the TPM passthrough driver only for i386 and x86_64 targets
using the default-configs files for those targets with softmmu.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: Corey Bryant <coreyb@linux.vnet.ibm.com>
Reviewed-by: Joel Schopp <jschopp@linux.vnet.ibm.com>
Message-id: 1361987275-26289-8-git-send-email-stefanb@linux.vnet.ibm.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Build the TPM frontend code that has been added so far.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: Corey Bryant <coreyb@linux.vnet.ibm.com>
Reviewed-by: Joel Schopp <jschopp@linux.vnet.ibm.com>
Message-id: 1361987275-26289-5-git-send-email-stefanb@linux.vnet.ibm.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
