This function needs to be converted to QOM hook and virtualised for
multi-arch. This rename interferes, as cpu-qom will not have access
to the renaming causing name divergence. This rename doesn't really do
anything anyway so just delete it.
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Message-Id: <69bd25a8678b8b31b91cd9760c777bed1aafb44e.1437212383.git.crosthwaite.peter@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Peter Crosthwaite <crosthwaitepeter@gmail.com>
This patch modifies SoftFloat library so that it can be configured in
run-time in relation to the meaning of signaling NaN bit, while, at the
same time, strictly preserving its behavior on all existing platforms.
Background:
In floating-point calculations, there is a need for denoting undefined or
unrepresentable values. This is achieved by defining certain floating-point
numerical values to be NaNs (which stands for "not a number"). For additional
reasons, virtually all modern floating-point unit implementations use two
kinds of NaNs: quiet and signaling. The binary representations of these two
kinds of NaNs, as a rule, differ only in one bit (that bit is, traditionally,
the first bit of mantissa).
Up to 2008, standards for floating-point did not specify all details about
binary representation of NaNs. More specifically, the meaning of the bit
that is used for distinguishing between signaling and quiet NaNs was not
strictly prescribed. (IEEE 754-2008 was the first floating-point standard
that defined that meaning clearly, see [1], p. 35) As a result, different
platforms took different approaches, and that presented considerable
challenge for multi-platform emulators like QEMU.
Mips platform represents the most complex case among QEMU-supported
platforms regarding signaling NaN bit. Up to the Release 6 of Mips
architecture, "1" in signaling NaN bit denoted signaling NaN, which is
opposite to IEEE 754-2008 standard. From Release 6 on, Mips architecture
adopted IEEE standard prescription, and "0" denotes signaling NaN. On top of
that, Mips architecture for SIMD (also known as MSA, or vector instructions)
also specifies signaling bit in accordance to IEEE standard. MSA unit can be
implemented with both pre-Release 6 and Release 6 main processor units.
QEMU uses SoftFloat library to implement various floating-point-related
instructions on all platforms. The current QEMU implementation allows for
defining meaning of signaling NaN bit during build time, and is implemented
via preprocessor macro called SNAN_BIT_IS_ONE.
On the other hand, the change in this patch enables SoftFloat library to be
configured in run-time. This configuration is meant to occur during CPU
initialization, at the moment when it is definitely known what desired
behavior for particular CPU (or any additional FPUs) is.
The change is implemented so that it is consistent with existing
implementation of similar cases. This means that structure float_status is
used for passing the information about desired signaling NaN bit on each
invocation of SoftFloat functions. The additional field in float_status is
called snan_bit_is_one, which supersedes macro SNAN_BIT_IS_ONE.
IMPORTANT:
This change is not meant to create any change in emulator behavior or
functionality on any platform. It just provides the means for SoftFloat
library to be used in a more flexible way - in other words, it will just
prepare SoftFloat library for usage related to Mips platform and its
specifics regarding signaling bit meaning, which is done in some of
subsequent patches from this series.
Further break down of changes:
1) Added field snan_bit_is_one to the structure float_status, and
correspondent setter function set_snan_bit_is_one().
2) Constants <float16|float32|float64|floatx80|float128>_default_nan
(used both internally and externally) converted to functions
<float16|float32|float64|floatx80|float128>_default_nan(float_status*).
This is necessary since they are dependent on signaling bit meaning.
At the same time, for the sake of code cleanup and simplicity, constants
<floatx80|float128>_default_nan_<low|high> (used only internally within
SoftFloat library) are removed, as not needed.
3) Added a float_status* argument to SoftFloat library functions
XXX_is_quiet_nan(XXX a_), XXX_is_signaling_nan(XXX a_),
XXX_maybe_silence_nan(XXX a_). This argument must be present in
order to enable correct invocation of new version of functions
XXX_default_nan(). (XXX is <float16|float32|float64|floatx80|float128>
here)
4) Updated code for all platforms to reflect changes in SoftFloat library.
This change is twofolds: it includes modifications of SoftFloat library
functions invocations, and an addition of invocation of function
set_snan_bit_is_one() during CPU initialization, with arguments that
are appropriate for each particular platform. It was established that
all platforms zero their main CPU data structures, so snan_bit_is_one(0)
in appropriate places is not added, as it is not needed.
[1] "IEEE Standard for Floating-Point Arithmetic",
IEEE Computer Society, August 29, 2008.
Signed-off-by: Thomas Schwinge <thomas@codesourcery.com>
Signed-off-by: Maciej W. Rozycki <macro@codesourcery.com>
Signed-off-by: Aleksandar Markovic <aleksandar.markovic@imgtec.com>
Tested-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Reviewed-by: Leon Alrae <leon.alrae@imgtec.com>
Tested-by: Leon Alrae <leon.alrae@imgtec.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[leon.alrae@imgtec.com:
* cherry-picked 2 chunks from patch #2 to fix compilation warnings]
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
Information is tracked inside the TCGContext structure, and later used
by tracing events with the 'tcg' and 'vcpu' properties.
The 'cpu' field is used to check tracing of translation-time
events ("*_trans"). The 'tcg_env' field is used to pass it to
execution-time events ("*_exec").
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Message-id: 146549350162.18437.3033661139638458143.stgit@fimbulvetr.bsc.es
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Now we have an emulated GICv3 we should advertise it via the
capabilities in the monitor protocol.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Shannon Zhao <shannon.zhao@linaro.org>
Tested-by: Shannon Zhao <shannon.zhao@linaro.org>
Message-id: 1465915112-29272-21-git-send-email-peter.maydell@linaro.org
Now we have an emulated GICv3, remove the restriction in
gicv3_class_name() so that the user can request a GICv3 with
-machine gic-version=3 even when not using KVM.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Shannon Zhao <shannon.zhao@linaro.org>
Tested-by: Shannon Zhao <shannon.zhao@linaro.org>
Message-id: 1465915112-29272-20-git-send-email-peter.maydell@linaro.org
This allows to override default affinity IDs on a per-machine basis, and
possibility to retrieve IDs will be used by vGICv3 live migration code.
Signed-off-by: Pavel Fedin <p.fedin@samsung.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Shannon Zhao <shannon.zhao@linaro.org>
Tested-by: Shannon Zhao <shannon.zhao@linaro.org>
Message-id: 1465915112-29272-6-git-send-email-peter.maydell@linaro.org
The GICv3 CPU interface needs to know when the CPU it is attached
to makes an exception level or mode transition that changes the
security state, because whether it is asserting IRQ or FIQ can change
depending on these things. Provide a mechanism for letting the GICv3
device register a hook to be called on such changes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Shannon Zhao <shannon.zhao@linaro.org>
Tested-by: Shannon Zhao <shannon.zhao@linaro.org>
Message-id: 1465915112-29272-5-git-send-email-peter.maydell@linaro.org
The GICv3 system registers need to know if the CPU is AArch64
in EL3 or AArch32 in Monitor mode. This happens to be the first
part of the check for arm_is_secure(), so factor it out into a
new arm_is_el3_or_mon() function that the GIC can also use.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Shannon Zhao <shannon.zhao@linaro.org>
Tested-by: Shannon Zhao <shannon.zhao@linaro.org>
Message-id: 1465915112-29272-4-git-send-email-peter.maydell@linaro.org
qemu/osdep.h checks whether MAP_ANONYMOUS is defined, but this check
is bogus without a previous inclusion of sys/mman.h. Include it in
sysemu/os-posix.h and remove it from everywhere else.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The Neon instructions VCVTA, VCVTM, VCVTN, VCVTP, VRINTA, VRINTM,
VRINTN, VRINTP, VRINTX, and VRINTZ were only introduced with ARMv8,
so they need a guard to make them UNDEF if the CPU only supports ARMv7.
(We got this right for all the other new-in-v8 insns, but forgot
it for these Neon 2-reg-misc ops.)
Reported-by: Christophe Lyon <christophe.lyon@linaro.org>
Tested-by: Christophe Lyon <christophe.lyon@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1465492511-9333-1-git-send-email-peter.maydell@linaro.org
Commit 6459b94c26 broke reset and migration of the AArch32
TTBCR(S) register if the guest used non-LPAE page tables. This is
because the AArch32 TTBCR register definition is marked as ARM_CP_ALIAS,
meaning that the AArch64 variant has to handle migration and reset.
Although AArch64 TCR_EL3 doesn't need to care about the mask and
base_mask fields, AArch32 may do so, and so we must use the special
TTBCR reset and raw write functions to ensure they are set correctly.
This doesn't affect TCR_EL2, because the AArch32 equivalent of that
is HTCR, which never uses the non-LPAE page table variant.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reported-by: Pranith Kumar <bobby.prani+qemu@gmail.com>
Reviewed-by: Sergey Fedorov <sergey.fedorov@linaro.org>
Message-id: 1465488181-31977-1-git-send-email-peter.maydell@linaro.org
Add a virtual PMU device for virt machine while use PPI 7 for PMU
overflow interrupt number.
Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Message-id: 1465267577-1808-3-git-send-email-zhaoshenglong@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Check if kvm supports guest PMUv3. If so, set the corresponding feature
bit for vcpu.
Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Message-id: 1465267577-1808-2-git-send-email-zhaoshenglong@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Paolo's recent cpu.h cleanups broke legacy virtio for ppc64 LE guests (and
arm BE guests as well, even if I have not verified that). Especially, commit
"33c11879fd42 qemu-common: push cpu.h inclusion out of qemu-common.h" has
the side-effect of silently hiding the TARGET_IS_BIENDIAN macro from the
virtio memory accessors, and thus fully disabling support of endian changing
targets.
To be sure this cannot happen again, let's gather all the bi-endian bits
where they belong in include/hw/virtio/virtio-access.h.
The changes in hw/virtio/vhost.c are safe because vhost_needs_vring_endian()
is not called on a hot path and non bi-endian targets will return false
anyway.
While here, also rename TARGET_IS_BIENDIAN to be more precise: it is only for
legacy virtio and bi-endian guests.
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Address size is 40-bit for the AArch32 stage 2 translation,
and t0sz can be negative (from -8 to 7),
so we need to adjust it to use the existing TTBR selecting logic.
Signed-off-by: Sergey Sorokin <afarallax@yandex.ru>
Message-id: 1464974151-1231644-1-git-send-email-afarallax@yandex.ru
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Remove some incorrect code from arm_cpu_do_interrupt_aarch64()
which attempts to set the IL bit in the syndrome register based
on the value of env->thumb. This is wrong in several ways:
* IL doesn't indicate Thumb-vs-ARM, it indicates instruction
length (which may be 16 or 32 for Thumb and is always 32 for ARM)
* not every syndrome format uses IL like this -- for some IL is
always set, and for some it is always clear
* the code is changing esr_el[new_el] even for interrupt entry,
which is not supposed to modify ESR_ELx at all
Delete the code, and instead rely on the syndrome value in
env->exception.syndrome having already been set up with the
correct value of IL.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1463487258-27468-3-git-send-email-peter.maydell@linaro.org
For some exception syndrome types, the IL bit should always be set.
This includes the instruction abort, watchpoint and software step
syndrome types; add the missing ARM_EL_IL bit to the syndrome
values returned by syn_insn_abort(), syn_swstep() and syn_watchpoint().
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1463487258-27468-2-git-send-email-peter.maydell@linaro.org
Add support for generating the ISS (Instruction Specific Syndrome) for
Data Abort exceptions taken from AArch64.
These syndromes are used by hypervisors for example to trap and emulate
memory accesses.
We save the decoded data out-of-band with the TBs at translation time.
When exceptions hit, the extra data attached to the TB is used to
recreate the state needed to encode instruction syndromes.
This avoids the need to emit moves with every load/store.
Based on a suggestion from Peter Maydell.
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1462464601-10888-2-git-send-email-edgar.iglesias@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add the Hypervisor System Trap Register for EL2.
This register is used early in the Linux boot and without it the kernel
aborts with a "Synchronous Abort" error.
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Message-id: ea5aae4b10283de4705b864fe9d4bd2eaddaacae.1463174342.git.alistair.francis@xilinx.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
exec-all.h contains TCG-specific definitions. It is not needed outside
TCG-specific files such as translate.c, exec.c or *helper.c.
One generic function had snuck into include/exec/exec-all.h; move it to
include/qom/cpu.h.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Avoid need for qemu/log.h inclusion, and make the function static too.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Make ARMCPU an opaque type within cpu-qom.h, and move all definitions of
private methods, as well as all type definitions that require knowledge
of the layout to cpu.h. This helps making files independent of NEED_CPU_H
if they only need to pass around CPU pointers.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Make cpu-qom.h so that it is only included from cpu.h. Then there
is no need for it to include cpu.h again.
Later we will make cpu-qom.h target independent and we will _want_
to include it from elsewhere, but for now reduce the number of cases
to handle.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In user mode, there's only a static address translation, TBs are always
invalidated properly and direct jumps are reset when mapping change.
Thus the destination address is always valid for direct jumps and
there's no need to restrict it to the pages the TB resides in.
Signed-off-by: Sergey Fedorov <serge.fdrv@gmail.com>
Signed-off-by: Sergey Fedorov <sergey.fedorov@linaro.org>
Cc: Riku Voipio <riku.voipio@iki.fi>
Cc: Blue Swirl <blauwirbel@gmail.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
We don't take care of direct jumps when address mapping changes. Thus we
must be sure to generate direct jumps so that they always keep valid
even if address mapping changes. Luckily, we can only allow to execute a
TB if it was generated from the pages which match with current mapping.
Document tcg_gen_goto_tb() declaration and note the reason for
destination PC limitations.
Some targets with variable length instructions allow TB to straddle a
page boundary. However, we make sure that both of TB pages match the
current address mapping when looking up TBs. So it is safe to do direct
jumps into the both pages. Correct the checks for some of those targets.
Given that, we can safely patch a TB which spans two pages. Remove the
unnecessary check in cpu_exec() and allow such TBs to be patched.
Signed-off-by: Sergey Fedorov <serge.fdrv@gmail.com>
Signed-off-by: Sergey Fedorov <sergey.fedorov@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
We are inconsistent with the type of tb->flags: usage varies loosely
between int and uint64_t. Settle to uint32_t everywhere, which is
superior to both: at least one target (aarch64) uses the most significant
bit in the u32, and uint64_t is wasteful.
Compile-tested for all targets.
Suggested-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Suggested-by: Richard Henderson <rth@twiddle.net>
Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Message-Id: <1460049562-23517-1-git-send-email-cota@braap.org>
The TCR_EL2 and TCR_EL3 regdefs were incorrectly using the
vmsa_tcr_el1_write function for writes. Since these registers don't
have the A1 bit that TCR_EL1 does, we don't need to do a tlb_flush()
when they are written. Remove the unnecessary .writefn and also the
harmless but unneeded .raw_writefn and .resetfn definitions.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Sergey Fedorov <sergey.fedorov@linaro.org>
Split ARM on/off function from PSCI support code.
This will allow to reuse these functions in other code.
Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The various load/store variants under disas_ldst_reg can all reuse the
same decoding for opc, size, rt and is_vector.
This patch unifies the decoding in preparation for generating
instruction syndromes for data aborts.
This will allow us to reduce the number of places to hook in updates
to the load/store state needed to generate the insn syndromes.
No functional change.
Reviewed-by: Sergey Fedorov <serge.fdrv@gmail.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1461931684-1867-7-git-send-email-edgar.iglesias@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Use extract32 instead of open coding the bit masking when decoding
is_signed and is_extended. This streamlines the decoding with some
of the other ldst variants.
No functional change.
Reviewed-by: Sergey Fedorov <serge.fdrv@gmail.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1461931684-1867-6-git-send-email-edgar.iglesias@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Split the data abort syndrome generator into two versions:
One with a valid Instruction Specific Syndrome (ISS) and another without.
The following new flags are supported by the syndrome generator
with ISS:
* isv - Instruction syndrome valid
* sas - Syndrome access size
* sse - Syndrome sign extend
* srt - Syndrome register transfer
* sf - Sixty-Four bit register width
* ar - Acquire/Release
These flags are not yet used, so this patch has no functional change
except that we will now correctly set the IL bit in data abort
syndromes without ISS information.
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1461931684-1867-5-git-send-email-edgar.iglesias@gmail.com>
[PMM: squashed in with patch which was just adding the IL bit]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
There is a bug in ARM address translation regime with a long-descriptor
format. On the descriptor reading its address is formed from an index
which is a part of the input address. And on the first iteration this index
is incorrectly masked with 'grainsize' mask. But it can be wider according
to pseudo-code.
On the other hand on the iterations other than first the descriptor address
is formed from the previous level descriptor by masking with 'descaddrmask'
value. It always clears just 12 lower bits, but it must clear 'grainsize'
lower bits instead according to pseudo-code.
The patch fixes both cases.
Signed-off-by: Sergey Sorokin <afarallax@yandex.ru>
Message-id: 1460996853-22117-1-git-send-email-afarallax@yandex.ru
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
As described in AArch32.CheckS2Permission an instruction fetch fails if
XN bit is set or there is no read permission for the address.
Signed-off-by: Sergey Sorokin <afarallax@yandex.ru>
Message-id: 1461002400-3187-1-git-send-email-afarallax@yandex.ru
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Move the ALIAS tag from VTCR_EL2 to VTCR so that we migrate the
64-bit version, as is usual. (This has no particular effect now
unless the guest wrote to the high RES0 bits of VTCR_EL2.)
Add a comment about why it's OK that we don't have the various
accessor functions that the EL1 TCR regdefs do.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Sergey Fedorov <sergey.fedorov@linaro.org>
Message-id: 1459435778-5526-4-git-send-email-peter.maydell@linaro.org
The regdefs for the ESR_EL2 and ESR_EL3 system registers should not
be marked as ARM_CP_ALIAS, because these are the master copies; the
DFSR regdef in vmsa_pmsa_cp_reginfo[] is marked as an alias.
Remove the ALIAS tags so that these registers are correctly migrated.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Sergey Fedorov <sergey.fedorov@linaro.rog>
Message-id: 1459435778-5526-3-git-send-email-peter.maydell@linaro.org
The regdef for SCTRL_EL3 was incorrectly marked as being an
ARM_CP_ALIAS, with the remark that this was because the 32-bit
definition would take care of reset and migration. However the
intention for banked registers as documented in the comment in
add_cpreg_to_hashtable() is:
* 2) If ARMv8 is enabled then we can count on a 64-bit version
* taking care of the secure bank. This requires that separate
* 32 and 64-bit definitions are provided.
and so it marks the 32-bit secure banked version as an alias.
This results in the sctlr_s/sctlr_el[3] field never being reset
or migrated for a 64-bit CPU with EL3 enabled.
Fix this by removing the ARM_CP_ALIAS annotation from SCTLR_EL3.
Since this means it now needs a real reset value, move the regdef
into the same place that we define the 32-bit SCTLR.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Reviewed-by: Sergey Fedorov <sergey.fedorov@linaro.org>
Message-id: 1459435778-5526-2-git-send-email-peter.maydell@linaro.org
For emulated GIC capabilities, currently only gicv2 is supported. We
need to add gicv3 in when emulated gicv3 ready. For KVM accelerated ARM
VM, we detect the capability bits by creating a scratch VM.
Signed-off-by: Peter Xu <peterx@redhat.com>
Acked-by: Sergey Fedorov <serge.fdrv@gmail.com>
Message-id: 1458788142-17509-5-git-send-email-peterx@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Support passing NULL for the first parameter (with the same effect
as passing an empty array) and for the third parameter (meaning
that we should not attempt to init the vcpu).
Signed-off-by: Peter Xu <peterx@redhat.com>
Acked-by: Sergey Fedorov <serge.fdrv@gmail.com>
Message-id: 1458788142-17509-3-git-send-email-peterx@redhat.com
[PMM: tweaked commit message, comment]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This patch add "query-gic-capabilities" but does not implement it. The
command is ARM-only. The command will return a list of GICCapability
structs that describes all GIC versions that current QEMU and system
support.
Libvirt is possibly the first consumer of this new command.
Before this patch, a libvirt user can successfully configure all kinds
of GIC devices for ARM guests, no matter whether current QEMU/kernel
supports them. If the specified GIC version/type is not supported, the
user will get an ambiguous "QEMU boot failure" error when trying to start
the VM. This is not user-friendly.
With this patch, libvirt should be able to query which type (and which
version) of GIC device is supported. Using this information, libvirt
can warn the user during configuration of guests when specified GIC
device type is not supported. Or better, we can just list those versions
that we support, and filter out the unsupported ones.
For example, if we got the query result:
{"return": [{"emulated": false, "version": 3, "kernel": true},
{"emulated": true, "version": 2, "kernel": false}]}
then it means that we support emulated GIC version 2 using:
qemu-system-aarch64 -M virt,accel=tcg,gic-version=2 ...
or KVM-accelerated GIC version 3 using:
qemu-system-aarch64 -M virt,accel=kvm,gic-version=3 ...
If we specify other explicit GIC versions rather than the above, QEMU
will not be able to boot.
The community is working on a more generic way to query these kinds of
information about valid values of machine properties. However, due to
the importance of supporting this specific use case, weecided to first
implement this ad-hoc one; then when the generic method is ready, we
can move on to that one smoothly.
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1458788142-17509-2-git-send-email-peterx@redhat.com
[PMM: tweaked commit message a bit; monitor.o is CONFIG_SOFTMMU only]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Each individual architecture needs to use the qemu_log_in_addr_range()
feature for enabling in_asm output as it is part of the frontend.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Message-Id: <1458052224-9316-9-git-send-email-alex.bennee@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move declarations out of qemu-common.h for functions declared in
utils/ files: e.g. include/qemu/path.h for utils/path.c.
Move inline functions out of qemu-common.h and into new files (e.g.
include/qemu/bcd.h)
Signed-off-by: Veronia Bahaa <veroniabahaa@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Commit 57cb38b included qapi/error.h into qemu/osdep.h to get the
Error typedef. Since then, we've moved to include qemu/osdep.h
everywhere. Its file comment explains: "To avoid getting into
possible circular include dependencies, this file should not include
any other QEMU headers, with the exceptions of config-host.h,
compiler.h, os-posix.h and os-win32.h, all of which are doing a
similar job to this file and are under similar constraints."
qapi/error.h doesn't do a similar job, and it doesn't adhere to
similar constraints: it includes qapi-types.h. That's in excess of
100KiB of crap most .c files don't actually need.
Add the typedef to qemu/typedefs.h, and include that instead of
qapi/error.h. Include qapi/error.h in .c files that need it and don't
get it now. Include qapi-types.h in qom/object.h for uint16List.
Update scripts/clean-includes accordingly. Update it further to match
reality: replace config.h by config-target.h, add sysemu/os-posix.h,
sysemu/os-win32.h. Update the list of includes in the qemu/osdep.h
comment quoted above similarly.
This reduces the number of objects depending on qapi/error.h from "all
of them" to less than a third. Unfortunately, the number depending on
qapi-types.h shrinks only a little. More work is needed for that one.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
[Fix compilation without the spice devel packages. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Qemu reports translation fault on 1st level instead of 0th level in case of
AArch64 address translation if the translation table walk is disabled or
the address is in the gap between the two regions.
Signed-off-by: Sergey Sorokin <afarallax@yandex.ru>
Message-id: 1457527503-25958-1-git-send-email-afarallax@yandex.ru
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Starting with the ARMv7 Virtualization Extensions, the A32 and T32
instruction sets provide instructions "MSR (banked)" and "MRS
(banked)" which can be used to access registers for a mode other
than the current one:
* R<m>_<mode>
* ELR_hyp
* SPSR_<mode>
Implement the missing instructions.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1456762734-23939-1-git-send-email-peter.maydell@linaro.org
Commit cbc0326b6f caused SRS instructions executed from Secure
EL1 to trap to EL3 even if the specified mode was not monitor mode.
According to the ARMv8 Architecture reference manual [F6.1.203], ALL
of the following conditions need to be met for SRS to trap to EL3:
* It is executed at Secure PL1.
* The specified mode is monitor mode.
* EL3 is using AArch64.
Correct the condition governing the trap to EL3 to check the
specified mode.
Signed-off-by: Ralf-Philipp Weinmann <ralf+devel@comsecuris.com>
Message-id: 20160222224251.GA11654@beta.comsecuris.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: tweaked comment text to read 'specified mode'; edited
commit message]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
System emulation only has a little-endian target; BE32 mode
is implemented by adjusting the low bits of the address
for every byte and halfword load and store. 64-bit accesses
flip the low and high words.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
[PC changes:
* rebased against master (Jan 2016)
]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
