Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20231004090629.37473-6-philmd@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Running every plugin with every test is getting excessive as well as
not really improving coverage that much. Restrict the plugin tests to
just the MULTIARCH_TESTS which are shared between most architecture
for both system and user-mode. For those that aren't we need to squash
MULTIARCH_TESTS so we don't add them when they are not part of the
TESTS global.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230424092249.58552-14-alex.bennee@linaro.org>
Don't disable all big-endian tests, instead check whether $(CORE) is
supported by the configured $(QEMU) and enable tests if it is.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Linker script for xtensa tests must be preprocessed for a specific
target, remove it as a part of make clean.
Fixes: be5cac175a ("tests/tcg/xtensa: enable system tests")
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Reviewed-by: Wilfred Mallawa <wilfred.mallawa@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Timer test assumes that timer 0 IRQ has level 1 and other timers have
higher level IRQs. This assumption is not correct and the levels may be
arbitrary. Fix that assumption by providing TIMER*_VECTOR macro and
using it for vector selection and by making the check for the timer
exception cause conditional.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
MMU test suite is disabled for cores that have spanning TLB way, i.e.
for all MMUv3 cores. Instead of disabling it make testing region virtual
addresses explicit and invalidate TLB mappings for entries that conflict
with the test.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Autorefill tests in the phys_mem test suite are disabled for cores that
have spanning TLB way, i.e. for all MMUv3 cores. Instead of disabling it
invalidate TLB mappings for entries that conflict with the test.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
xtensa core may not have the loop option, but still have timers. Don't
use loop opcode in the timer test.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
xtensa core may have only one set of DBREAKA/DBREAKC registers. Don't
hardcode register numbers in the test as 0 and 1, use macros that only
index valid DBREAK* registers.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Writing garbage into the vecbase SR results in hang in the subsequent
tests that expect to raise an exception. Restore vecbase SR to its
reset value after the test.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Convert the TARGET_WORDS_BIGENDIAN macro, similarly to what was done
with HOST_BIG_ENDIAN. The new TARGET_BIG_ENDIAN macro is either 0 or 1,
and thus should always be defined to prevent misuse.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Suggested-by: Halil Pasic <pasic@linux.ibm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220323155743.1585078-8-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Xtensa cores may or may not have hardware support for unaligned memory
access. Remove TARGET_ALIGNED_ONLY=y from all xtensa configurations and
pass MO_ALIGN in memory access flags for all operations that would raise
an exception.
Simplify use of gen_load_store_alignment by passing access size and
alignment requirements in single parameter.
Drop condition from xtensa_cpu_do_unaligned_access and replace it with
assertion.
Add a test.
Suggested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
DFPU doesn't have pre-increment FP load/store opcodes, it has
post-increment opcodes instead. Test increment opcodes present in the
current config.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
DFPU sets Invalid flag in FSR when at least one argument of FP
comparison opcodes is NaN, SNaN for most opcodes, any NaN for olt/ole.
Add checks for FSR and expected FSR values.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Test that madd doesn't do rounding after multiplication.
Test NaN propagation rules for FPU2000 and DFPU madd opcode.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Space for test results may be allocated in IRAM which is only
word-accessible. Use full 32-bit words to access test results.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Avoid the repeated inclusions of config-target.mak, which have
risks of namespace pollution, and instead build minimal configuration
files in a configuration script. The same configuration files can
also be included in Makefile and Makefile.qemu
[AJB 10/09/19]
In the original PR this had inadvertently enabled tests
for ppc64abi32. However as the rest of the multiarch tests work rather
than disabling the otherwise correctly functioning build I've just
skipped the failing linux-test test. For some reason I can't debug it
with TCG so I'm leaving that to the PPC maintainers to look at.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20190807143523.15917-4-pbonzini@redhat.com>
[AJB: s/docker/container/, rm last bits from configure, ppc6432abi hack]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Cc: Richard Henderson <rth@twiddle.net>
For i386 specifically, this allows using the host GCC
to compile the i386 tests. But, it should really be
done for all targets, unless we want to pass $(EXTRA_CFLAGS)
directly as part of $(CC).
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20190807143523.15917-2-pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
The Exclusive Instructions provide a general-purpose mechanism for
atomic updates of memory-based synchronization variables that can be
used for exclusion algorithms.
Use cmpxchg-based implementation that is sufficient for the typical use
of exclusive access in atomic operations.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Drop test_fail: we know that exit simcall works. Now that it's not run
automatically there's no point in keeping it.
Drop test_pipeline: we're not modeling pipeline, we don't control ccount
and there's no plan to do so.
Enable test_boolean: it won't break on cores without boolean option, it
will do testing on cores with boolean option.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
break_dependency incorrectly handles the case of dependency on an opcode
that references the same register multiple times. E.g. the following
instruction is translated incorrectly:
{ or a2, a3, a3 ; or a3, a2, a2 }
This happens because resource indices of both dependency graph nodes are
incremented, and a copy for the second instance of the same register in
the ending node is not done.
Only increment resource index of the ending node of the dependency.
Add test.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Make windowed register tests conditional on the presence of this option.
Fix tests to work correctly for both 32 and 64 physical registers.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Make s32c1i tests conditional on the presence of this option. Initialize
ATOMCTL SR when it's present to allow RCW transactions on uncached
memory.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
SR tests generate instructions that the assembler does not recognize and
thus must take care about configuration endianness.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Make tests for specific special registers conditional on the presence of
the options that add these registers and test that the registers are not
accessible otherwise.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Make timer/CCOUNT tests conditional on the presence of timer option and
number of configured timers. Don't use hard coded interrupt levels for
timers, use configured values.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Make interrupt tests conditional on the presence of interrupt option and
on the presence of level-1 and high level software interrupts. Don't use
hard-coded interrupt level for the high level interrupt tests, choose
high level software IRQ and use its configured level.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Make tests for optional instruction groups conditional on the presence
of corresponding options in the config.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Make data/instruction tests conditional on the presence of
data/instruction cache, whether they're lockable and whether data cache
is writeback.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Make debug tests conditional on the presence of the debug option in the
config and tests that depend on the presence/number of instruction or
data breakpoint registers on the corresponding definitions. Use
configured debug interrupt level instead of the hardcoded value to set
up IRQ handler and access debug EPC register.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Uncomment test_boolean in the test makefile. Make actual tests code
conditional on the presence of boolean option in the config.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Use bbci.l/bbsi.l instead of bbci/bbsi, as they are assembly macros that
accept little-endian bit number and produce correct immediate for both
little and big endian configurations. Choose value loaded into register
for bbc/bbs opcodes based on configuration endianness.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Don't use 'loop' opcode in generic testsuite completion code, only use
core opcodes to make it work with any configuration.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Configurations with LITBASE register may use absolute literals by
default. Pass --no-absolute-literals option to assembler to use
PC-relative literals instead.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Configurations w/o vecbase may have vectors not grouped together and not
in fixed order. They may not always be grouped into single output
sections by assigning next offset to dot, as it may sometimes move dot
backwards and sometimes they may even belong to different memory region.
Don't group vectors into single output section. Instead put each vector
into its own section ant put it at its default virtual address.
Reserve 4KBytes from the default vectors base and put rest of the code
and data starting from there. Mark vectors sections as executable,
otherwise their contents is discarded. There may be as little as 16
bytes reserved for some vectors, load handler address into a0 and use
ret.n to jump there to make vector code fit into this 16 byte space.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
