This adds a "ibm,chip-id" property for CPU nodes which should be the same
for all cores in the same CPU socket. The recent guest kernels use this
information to associate threads with sockets.
Refer to the kernel commit 256f2d4b463d3030ebc8d2b54f427543814a2bdc
for more details.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
This allows guests to have a different timebase origin from the host.
This is needed for migration, where a guest can migrate from one host
to another and the two hosts might have a different timebase origin.
However, the timebase seen by the guest must not go backwards, and
should go forwards only by a small amount corresponding to the time
taken for the migration.
This is only supported for recent POWER hardware which has the TBU40
(timebase upper 40 bits) register. That includes POWER6, 7, 8 but not
970.
This adds kvm_access_one_reg() to access a special register which is not
in env->spr. This requires kvm_set_one_reg/kvm_get_one_reg patch.
The feature must be present in the host kernel.
This bumps vmstate_spapr::version_id and enables new vmstate_ppc_timebase
only for it. Since the vmstate_spapr::minimum_version_id remains
unchanged, migration from older QEMU is supported but without
vmstate_ppc_timebase.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
Almost all platforms QEMU emulates have some sort of firmware they can load
to expose a guest environment that closely resembles the way it would look
like on real hardware.
This patch introduces such a firmware on our e500 platforms. U-boot is the
default firmware for most of these systems and as such our preferred choice.
For backwards compatibility reasons (and speed and simplicity) we skip u-boot
when you use -kernel and don't pass in -bios. For all other combinations like
-kernel and -bios or no -kernel you get u-boot as firmware.
This allows you to modify the boot environment, execute a networked boot through
the e1000 emulation and execute u-boot payloads.
Signed-off-by: Alexander Graf <agraf@suse.de>
We want to move to a model where firmware loads our kernel. To achieve
this we need to be able to tell firmware where the kernel lies.
Let's copy the mechanism we already use for -M pseries and expose the
kernel load address and size through the device tree.
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds pci pin to irq_num routing callback.
This callback is called from pci_device_route_intx_to_irq to
find which pci device maps to which irq.
This fix is required for pci-device passthrough using vfio.
Also without this patch we gets below prints
"
PCI: Bug - unimplemented PCI INTx routing (e500-pcihost)
qemu-system-ppc64: PCI: Bug - unimplemented PCI INTx routing (e500-pcihost) "
and Legacy interrupt does not work with pci device passthrough.
Signed-off-by: Bharat Bhushan <Bharat.Bhushan@freescale.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
[agraf: remove double semicolon]
Signed-off-by: Alexander Graf <agraf@suse.de>
- Use PCI_NUM_PINS rather than hardcoding
- use "pin" wherever possible
Signed-off-by: Bharat Bhushan <Bharat.Bhushan@freescale.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
At the moment XICS does not support interrupts reuse so sPAPR PHB
implements this. sPAPRPHBState holds array of 32 spapr_pci_msi to
describe PCI config address, first MSI and number of MSIs. Once
allocated for a device, QEMU tries reusing this config until the number
of MSIs changes.
Existing SPAPR guests call ibm,change-msi in a loop until the handler
returns the requested number of vectors.
Recently introduced check for the maximum number of MSI/MSIX vectors
supported by a device only works for a device which is new for PHB's
MSI cache. If it is already there, the check is not performed which
leads to new IRQ block allocation. This happens during PCI hotplug
even when the user hot plug the same device which he just hot unplugged.
This moves the check earlier.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
While there, also moved the hard coded value for CLOCKFREQ to a #define.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Alexander Graf <agraf@suse.de>
Current guest kernels try allocating as many vectors as the quota is.
For example, in the case of virtio-net (which has just 3 vectors)
the guest requests 4 vectors (that is the quota in the test) and
the existing ibm,change-msi handler returns 4. But before it returns,
it calls msix_set_message() in a loop and corrupts memory behind
the end of msix_table.
This limits the number of vectors returned by ibm,change-msi to
the maximum supported by the actual device.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Cc: qemu-stable@nongnu.org
[agraf: squash in bugfix from aik]
Signed-off-by: Alexander Graf <agraf@suse.de>
In the past, IO space could not be mapped into the memory address space
so we introduced a workaround for that. Nowadays it does not look
necessary so we can remove the workaround and make sPAPR PCI
configuration simplier.
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Acked-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
Currently it is UINT16_MAX*16 = 65536*16 = 1048560 which is not
a round number and therefore a bit confusing.
This defines MAX_NVRAM_SIZE precisely as 1MB.
Suggested-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
IRQ are lowered when ievent bit is cleared, so irq_pulse makes no sense
here...
Signed-off-by: Fabien Chouteau <chouteau@adacore.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
After previous Peter patch, they are redundant. This way we don't
assign them except when needed. Once there, there were lots of case
where the ".fields" indentation was wrong:
.fields = (VMStateField []) {
and
.fields = (VMStateField []) {
Change all the combinations to:
.fields = (VMStateField[]){
The biggest problem (appart from aesthetics) was that checkpatch complained
when we copy&pasted the code from one place to another.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Acked-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
After previous Peter patch, they are redundant. This way we don't
assign them except when needed. Once there, there were lots of case
where the ".fields" indentation was wrong:
.fields = (VMStateField []) {
and
.fields = (VMStateField []) {
Change all the combinations to:
.fields = (VMStateField[]){
The biggest problem (appart from aesthetics) was that checkpatch complained
when we copy&pasted the code from one place to another.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Acked-by: Alexey Kardashevskiy <aik@ozlabs.ru>
So you'll have a mouse pointer when running non-qxl gfx cards with
mouse pointer support (virtio-gpu, IIRC vmware too).
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Avoid using the GNU extesion ffsl which is not implemented in musl libc.
The atomic_xchg() means we know that vhost_log_chunk_t will never be
larger than the 'long' type, so ctzl() is always sufficient.
See also commit fbeadf50 (bitops: unify bitops_ffsl with the one in
host-utils.h, call it bitops_ctzl) on why ctzl should be used instead
of ffsl.
Signed-off-by: Natanael Copa <ncopa@alpinelinux.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
hello qemu-*@nongnu.org, this is my first contribution. apologies if
something is incorrect.
this patch fixes vmware_vga.c so that it actually returns the cursory
register when asked for, instead of cursorx.
Signed-off-by: Nicolas Owens <mischief@offblast.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
No need to wrap it with an if.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The ne2000-isa device defines a VMState struct for migration, but
we forgot to actually register it. Correct this deficiency by
setting dc->vmsd.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The functions softusb_read_pmem() and softusb_write_pmem() are unused;
remove them.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The function is_parallel_epp() is unused; remove it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The IRQ_testbit() function is never used; remove it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The stream_halted() function is never used; remove it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Drop the sd_acmd_type[] array: it is never used. (The equivalent
sd_cmd_type[] array for normal commands is used to identify
those commands whose argument includes the card address in the
top 16 bits; but for app commands the card address is passed
with the APP_CMD prefix, not with the argument to the app command
itself.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The variables parallel_io and parallel_irq are unused; delete them.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Add a debug printf for TX descriptor fetching. This is helpful to anyone
needing to debug TX ring buffer traversal. It is also now consistent with
the RX code which has a similar printf.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The local variable "desc" was being used to read-modify-write the
first descriptor (of a multi-desc packet) upon packet completion.
desc however continues to be used by the code as the current
descriptor. Give this first desc RMW it's own local variable to
avoid trampling.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Try to inject floating interrupts via the flic if it is available.
This allows us to inject the full range of floating interrupts.
Reviewed-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Remove the need for a cpu to inject a floating interrupt on kvm.
Acked-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Move the injection code for all floating interrupts to interrupt.c
and add a comment.
Also get rid of the #ifdef CONFIG_KVM for the service interrupt.
Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
This patch adds live migration support for virtio-ccw devices.
It's not done with vmstate because virtio itself is not yet ported
to vmstate either.
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
If we run with an old kernel that does not support KVM_CAP_IRQ_ROUTING,
we don't have to do anything in the ->register_io_adapter and
->io_adapter_map callbacks and therefore should return 0 instead of
-ENOSYS (just as the non-kvm flic does).
This fixes using adapter interrupts when running under an older kernel,
which broke with "s390x: add I/O adapter registration".
Reported-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
We should not try to store the emw portion of the irb if extended
measurements are not applicable. In particular, we should not surprise
the guest by storing a larger irb if it did not enable extended
measurements.
Cc: qemu-stable@nongnu.org
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Tested-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Right now to run firmware inside the QEMU VExpress model requires
padding out the firmware image to the size of the virtual flash and
passing it in via the -pflash argument. If the firmware image is passed
without padding, then QEMU will fail. Also, when passed as a -pflash
argument, QEMU treats the file as persistent storage and will modify the
file.
The -bios flag provides the semantics that we want for providing a
firmware image. This patch maps the contents of the -bios file into the
address space at the boot flash location.
Tested with the vexpress-a15 model and the Tianocore port.
Signed-off-by: Grant Likely <grant.likely@linaro.org>
Tested-by: Roy Franz <roy.franz@linaro.org>
[PMM: folded long line, removed stray \n from error message,
use correct variable for printing image name, exit(1) rather than 0]
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Currently, e1000 support is based on the manual for the 8254xx
model series. 82573x models are documented in a separate manual
(see http://www.intel.com/content/dam/www/public/us/en/documents/manuals/pcie-gbe-controllers-open-source-manual.pdf)
and the 82573L device ID no longer works correctly on either Linux
(3.14.*) or Windows 7.
This patch removes stale code claiming to support 82573L, cleaning
up the code base for the remaining 8254xx model series.
Signed-off-by: Gabriel Somlo <somlo@cmu.edu>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Allow selection of different card models from the qemu
command line, to better accomodate a wider range of guests.
Signed-off-by: Romain Dolbeau <romain@dolbeau.org>
Signed-off-by: Gabriel Somlo <somlo@cmu.edu>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
In vmxnet3_cleanup_msix(), there is called msix_vector_unuse() with
VMXNET3_MAX_INTRS. That is not correct since vector of
value VMXNET3_MAX_INTRS was never used. Also all the used vectors
are not un-used. So call vmxnet3_unuse_msix_vectors() instead which
does the correct job.
Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Acked-by: Dmitry Fleytman <dmitry@daynix.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
There is no CTRL_I bit in the pong buffer control register. The
CTRL_I bit from the ping buffer masks both ping and pong buffers.
Fix.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJTkeeSAAoJEJykq7OBq3PIi9sIAIKVSHE/c6Tc4rGcIgPoAXTS
li9FCQ/vXFUehIe6MFMmf6OX08zKxBw18DLS6mLyqAn5lJGUWQBXiP+nXqgzhy5T
EoCtwE/n5fpbQuCVxXm+CsaGZc4IySyZ4FiwqAe4MysYKXkJbDGEF/TEzL+0vFw4
wEHZUQ3ykydJtPLtZVI3MNRmqRtk7zbq8So6g/FYB3VyIeyhMp1peWahHPLXGOQ/
phpk5G4Yk6p8TtjTe6lo4ajBzAprsxc052Jz+MaxbuihzfHjf2i62iLixcDDTUzz
6n/sCVsvorA6O6SJ/sMtkQs1N1cXoj3tKSIu8gh6zkAtlg/V6sSRaLCnQQtFQB4=
=xvq7
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stefanha/tags/block-pull-request' into staging
Block pull request
# gpg: Signature made Fri 06 Jun 2014 17:08:50 BST using RSA key ID 81AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>"
# gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>"
* remotes/stefanha/tags/block-pull-request: (42 commits)
qapi: Extract qapi/block.json definitions
qapi: Extract qapi/block-core.json definitions
qapi: create two block related json modules
qapi: Extract qapi/common.json definitions
sheepdog: reload only header in a case of live snapshot
sheepdog: fix vdi object update after live snapshot
rbd: Fix leaks in rbd_start_aio() error path
qemu-img: Document check exit codes
block: fix wrong order in live block migration setup
blockdev: acquire AioContext in block_set_io_throttle
throttle: add detach/attach test case
throttle: add throttle_detach/attach_aio_context()
dataplane: Support VIRTIO_BLK_T_SCSI_CMD
virtio-blk: Factor out virtio_blk_handle_scsi_req from virtio_blk_handle_scsi
virtio-blk: Allow config-wce in dataplane
block: Move declaration of bdrv_get_aio_context to block.h
raw-posix: drop raw_get_aio_fd() since it is no longer used
dataplane: implement async flush
dataplane: delete IOQueue since it is no longer used
dataplane: use the QEMU block layer for I/O
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
SysBusDevice::init is depracated. Convert to Object::init
as prescribed by QOM conventions.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
