Added function that loads RSS eBPF program.
Added stub functions for RSS eBPF loader.
Added meson and configuration options.
By default, eBPF feature enabled if libbpf is present in the build system.
libbpf checked in configuration shell script and meson script.
Signed-off-by: Yuri Benditovich <yuri.benditovich@daynix.com>
Signed-off-by: Andrew Melnychenko <andrew@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Several distros have been dropped since the last time we bumped the
minimum required CLang version.
Per repology, currently shipping versions are:
RHEL-8: 10.0.1
Debian Buster: 7.0.1
openSUSE Leap 15.2: 9.0.1
Ubuntu LTS 18.04: 6.0.0
Ubuntu LTS 20.04: 10.0.0
FreeBSD 12: 8.0.1
Fedora 33: 11.0.0
Fedora 34: 11.1.0
With this list Ubuntu LTS 18.04 is the constraint at 6.0.0
An LLVM version of 6.0.0 corresponds to macOS XCode version of 10.0
which dates from Sept 2018.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20210514120415.1368922-13-berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Several distros have been dropped since the last time we bumped the
minimum required GCC version.
Per repology, currently shipping versions are:
RHEL-8: 8.3.1
Debian Buster: 8.3.0
openSUSE Leap 15.2: 7.5.0
Ubuntu LTS 18.04: 7.5.0
Ubuntu LTS 20.04: 9.3.0
FreeBSD: 10.3.0
Fedora 33: 9.2.0
Fedora 34: 11.0.1
OpenBSD: 8.4.0
macOS HomeBrew: 11.1.0
With this list Ubuntu LTS 18.04 / openSUSE Leap 15.2 are the
constraint at 7.5.0
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20210514120415.1368922-12-berrange@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The glib version was not previously constrained by RHEL-7 since it
rebases fairly often. Instead SLES 12 and Ubuntu 16.04 were the
constraints in 00f2cfbbec. Both of
these are old enough that they are outside our platform support
matrix now.
Per repology, current shipping versions are:
RHEL-8: 2.56.4
Debian Buster: 2.58.3
openSUSE Leap 15.2: 2.62.6
Ubuntu LTS 18.04: 2.56.4
Ubuntu LTS 20.04: 2.64.6
FreeBSD: 2.66.7
Fedora 33: 2.66.8
Fedora 34: 2.68.1
OpenBSD: 2.68.1
macOS HomeBrew: 2.68.1
Thus Ubuntu LTS 18.04 / RHEL-8 are the constraint for GLib version
at 2.56
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20210514120415.1368922-11-berrange@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
It has been over two years since RHEL-8 was released, and thus per the
platform build policy, we no longer need to support RHEL-7 as a build
target. This lets us increment the minimum required gnutls version
Per repology, current shipping versions are:
RHEL-8: 3.6.14
Debian Buster: 3.6.7
openSUSE Leap 15.2: 3.6.7
Ubuntu LTS 18.04: 3.5.18
Ubuntu LTS 20.04: 3.6.13
FreeBSD: 3.6.15
Fedora 33: 3.6.16
Fedora 34: 3.7.1
OpenBSD: 3.6.15
macOS HomeBrew: 3.6.15
Ubuntu LTS 18.04 has the oldest version and so 3.5.18 is the new minimum.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20210514120415.1368922-7-berrange@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
[thuth: rebased to use .gitlab-ci.d/buildtest.yml]
Signed-off-by: Thomas Huth <thuth@redhat.com>
It has been over two years since RHEL-8 was released, and thus per the
platform build policy, we no longer need to support RHEL-7 as a build
target. This lets us increment the minimum required gcrypt version and
assume that HMAC is always supported
Per repology, current shipping versions are:
RHEL-8: 1.8.5
Debian Buster: 1.8.4
openSUSE Leap 15.2: 1.8.2
Ubuntu LTS 18.04: 1.8.1
Ubuntu LTS 20.04: 1.8.5
FreeBSD: 1.9.2
Fedora 33: 1.8.6
Fedora 34: 1.9.3
OpenBSD: 1.9.3
macOS HomeBrew: 1.9.3
Ubuntu LTS 18.04 has the oldest version and so 1.8.0 is the new minimum.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20210514120415.1368922-6-berrange@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
[thuth: rebased to use .gitlab-ci.d/buildtest.yml]
Signed-off-by: Thomas Huth <thuth@redhat.com>
It has been over two years since RHEL-8 was released, and thus per the
platform build policy, we no longer need to support RHEL-7 as a build
target. This lets us increment the minimum required nettle version and
drop a lot of backwards compatibility code for 2.x series of nettle.
Per repology, current shipping versions are:
RHEL-8: 3.4.1
Debian Buster: 3.4.1
openSUSE Leap 15.2: 3.4.1
Ubuntu LTS 18.04: 3.4
Ubuntu LTS 20.04: 3.5.1
FreeBSD: 3.7.2
Fedora 33: 3.5.1
Fedora 34: 3.7.2
OpenBSD: 3.7.2
macOS HomeBrew: 3.7.2
Ubuntu LTS 18.04 has the oldest version and so 3.4 is the new minimum.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20210514120415.1368922-4-berrange@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
[thuth: rebased to use .gitlab-ci.d/buildtest.yml]
Signed-off-by: Thomas Huth <thuth@redhat.com>
It has been over two years since RHEL-8 was released, and thus per the
platform build policy, we no longer need to support RHEL-7 as a build
target. So from the RHEL-7 perspective, we do not have to support
libssh v0.7 anymore now.
Let's look at the versions from other distributions and operating
systems - according to repology.org, current shipping versions are:
RHEL-8: 0.9.4
Debian Buster: 0.8.7
openSUSE Leap 15.2: 0.8.7
Ubuntu LTS 18.04: 0.8.0 *
Ubuntu LTS 20.04: 0.9.3
FreeBSD: 0.9.5
Fedora 33: 0.9.5
Fedora 34: 0.9.5
OpenBSD: 0.9.5
macOS HomeBrew: 0.9.5
HaikuPorts: 0.9.5
* The version of libssh in Ubuntu 18.04 claims to be 0.8.0 from the
name of the package, but in reality it is a 0.7 patched up as a
Frankenstein monster with patches from the 0.8 development branch.
This gave us some headaches in the past already and so it never worked
with QEMU. All attempts to get it supported have failed in the past,
patches for QEMU have never been merged and a request to Ubuntu to
fix it in their 18.04 distro has been ignored:
https://bugs.launchpad.net/ubuntu/+source/libssh/+bug/1847514
Thus we really should ignore the libssh in Ubuntu 18.04 in QEMU, too.
Fix it by bumping the minimum libssh version to something that is
greater than 0.8.0 now. Debian Buster and openSUSE Leap have the
oldest version and so 0.8.7 is the new minimum.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Tested-by: Richard W.M. Jones <rjones@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Acked-by: Richard W.M. Jones <rjones@redhat.com>
Message-Id: <20210519155859.344569-1-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
When compiling with --disable-system there is a harmless yet still
annoying error message at the end of the "configure" step:
sed: can't read *-config-devices.h: No such file or directory
When only building the tools or docs, without any emulator at all,
there is even an additional message about missing *-config-target.h
files.
Fix it by checking whether any of these files are available before
using them.
Fixes: e0447a834d ("configure: Poison all current target-specific #defines")
Reported-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210519113840.298174-1-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Do not guard each assignment with a check for --with-git-submodules=ignore.
To avoid a confusing "GIT" line from the Makefile, guard the git-submodule-update
recipe so that it is empty when --with-git-submodules=ignore.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Right now --with-git-submodules=ignore has a subtle difference from
just running without a .git directory, in that it does not check
that submodule sources actually exist. Move the check for
ui/keycodemapdb/README so that it happens even if the user
specified --with-git-submodules=ignore, with a customized
error message that is more suitable for this situation.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210512045821.3257963-1-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When implementing spice vdagent protocol in qemu we only need the
spice-protocol package for that, spice-server is not needed. So
go split those two build dependencies.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20210519053940.1888907-1-kraxel@redhat.com
Message-Id: <20210519053940.1888907-2-kraxel@redhat.com>
Otherwise you run into hilarity like trying when cross compiling a 32
bit ARM build on a 64 bit system trying to use host_cc to build 32 bit
test cases.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20210512102051.12134-32-alex.bennee@linaro.org>
this is needed by the tricore-tcg-tests as tricore-gcc is not easily
available. Thus we rely on the HOST_CC to do the preprocessing of the
tricore assembly files.
Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20210305170045.869437-6-kbastian@mail.uni-paderborn.de>
Message-Id: <20210512102051.12134-16-alex.bennee@linaro.org>
We are generating a lot of target-specific defines in the *-config-devices.h
and *-config-target.h files. Using them in common code is wrong and leads
to very subtle bugs since a "#ifdef CONFIG_SOMETHING" is not working there
as expected. To avoid these issues, we are already poisoning many of the
macros in include/exec/poison.h - but it's cumbersome to maintain this
list manually. Thus let's generate an additional list of poisoned macros
automatically from the current config switches - this should give us a
much better test coverage via the different CI configurations.
Note that CONFIG_TCG (which is also defined in config-host.h) and
CONFIG_USER_ONLY are special, so we have to filter these out.
Message-Id: <20210414112004.943383-5-thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Target unicore32 was deprecated in commit 8e4ff4a8d2, v5.2.0. See
there for rationale.
Cc: Guan Xuetao <gxt@mprc.pku.edu.cn>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20210503084034.3804963-3-armbru@redhat.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Target lm32 was deprecated in commit d849800512, v5.2.0. See there
for rationale.
Some of its code lives on in device models derived from milkymist
ones: hw/char/digic-uart.c and hw/display/bcm2835_fb.c.
Cc: Michael Walle <michael@walle.cc>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20210503084034.3804963-2-armbru@redhat.com>
Acked-by: Michael Walle <michael@walle.cc>
[Trivial conflicts resolved, reST markup fixed]
It was deprecated in commit e1c4269763, v5.2.0. See that commit
message for rationale.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20210501075747.3293186-1-armbru@redhat.com>
ACKed-by: Peter Krempa <pkrempa@redhat.com>
* i386 page walk unification
* Fix detection of gdbus-codegen
* Misc refactoring
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmCblEEUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroObnQgAj10pRDODY9hIiUiYj2sTcEQTly3p
DC+ZWDaup67z3WV2C/vAS/x31RGIus+7bzji3fgtUcnGOr7sbuOCcs7CPY8mam5Y
GMPNrsUk2sZ5z9SVTq2vjEa61tjxtMpYXx9pnhgJzJAO4NJzNuX74ZdpA+oV5aTC
CvZDk8lC7BLU16MfeLcbw44xE4Oy05wWwaoP2pvhdOg47y85t/S9Il1yBCYi3y8C
pTOBBCYmHGPj/r7i4MhUGrAjIyGQu1w7av8nZXouRegoeVl28RKR8+pl7TfFpt+E
cp95yE8dPuNFJnCiZ3Kv01eBcSUcyp4gVb5H2Oa/nkkYRLpnONbUzYFtIA==
=zR5U
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini-gitlab/tags/for-upstream' into staging
* AccelCPUClass and sysemu/user split for i386 (Claudio)
* i386 page walk unification
* Fix detection of gdbus-codegen
* Misc refactoring
# gpg: Signature made Wed 12 May 2021 09:39:29 BST
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* remotes/bonzini-gitlab/tags/for-upstream: (32 commits)
coverity-scan: list components, move model to scripts/coverity-scan
configure: fix detection of gdbus-codegen
qemu-option: support accept-any QemuOptsList in qemu_opts_absorb_qdict
main-loop: remove dead code
target/i386: use mmu_translate for NPT walk
target/i386: allow customizing the next phase of the translation
target/i386: extend pg_mode to more CR0 and CR4 bits
target/i386: pass cr3 to mmu_translate
target/i386: extract mmu_translate
target/i386: move paging mode constants from SVM to cpu.h
target/i386: merge SVM_NPTEXIT_* with PF_ERROR_* constants
accel: add init_accel_cpu for adapting accel behavior to CPU type
accel: move call to accel_init_interfaces
i386: make cpu_load_efer sysemu-only
target/i386: gdbstub: only write CR0/CR2/CR3/EFER for sysemu
target/i386: gdbstub: introduce aux functions to read/write CS64 regs
i386: split off sysemu part of cpu.c
i386: split seg_helper into user-only and sysemu parts
i386: split svm_helper into sysemu and stub-only user
i386: separate fpu_helper sysemu-only parts
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
"pkg-config --variable=gdbus_codegen gio-2.0" returns "gdbus-codegen",
and it does not pass test -x (which does not walk the path).
Meson 0.58.0 notices that something is iffy, as the dbus_vmstate1
assignment in tests/qtest/meson.build uses an empty string as the
command, and fails very eloquently:
../tests/qtest/meson.build:92:2: ERROR: No program name specified.
Use the "has" function instead of test -x, and fix the generation
of config-host.mak since meson.build expects that GDBUS_CODEGEN
is absent, rather than empty, if the tool is unavailable.
Reported-by: Sebastian Mitterle <smitterl@redhat.com>
Fixes: #178
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* Fix ECKD booting with null block numbers in the chain
-----BEGIN PGP SIGNATURE-----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=Gg+4
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/thuth-gitlab/tags/s390-ccw-bios-2021-05-10' into staging
* Make the s390-ccw bios compilable with Clang
* Fix ECKD booting with null block numbers in the chain
# gpg: Signature made Mon 10 May 2021 08:27:34 BST
# gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5
# gpg: issuer "thuth@redhat.com"
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full]
# gpg: aka "Thomas Huth <thuth@redhat.com>" [full]
# gpg: aka "Thomas Huth <huth@tuxfamily.org>" [full]
# gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5
* remotes/thuth-gitlab/tags/s390-ccw-bios-2021-05-10:
pc-bios/s390: Update the s390-ccw bios binaries with the Clang and other fixes
pc-bios/s390-ccw: Allow building with Clang, too
pc-bios/s390-ccw: Silence GCC 11 stringop-overflow warning
pc-bios/s390-ccw: Fix the cc-option macro in the Makefile
pc-bios/s390-ccw: Silence warning from Clang by marking panic() as noreturn
pc-bios/s390-ccw/netboot: Use "-Wl," prefix to pass parameter to the linker
pc-bios/s390-ccw: Use reset_psw pointer instead of hard-coded null pointer
pc-bios/s390-ccw/bootmap: Silence compiler warning from Clang
pc-bios/s390-ccw: don't try to read the next block if end of chunk is reached
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Clang unfortunately does not support generating code for the z900
architecture level and starts with the z10 instead. Thus to be able
to support compiling with Clang, we have to check for the supported
compiler flags. The disadvantage is of course that the bios image
will only run with z10 guest CPUs upwards (which is what most people
use anyway), so just in case let's also emit a warning in that case
(we will continue to ship firmware images that have been pre-built
with GCC in future releases, so this should not impact normal users,
too).
Message-Id: <20210502174836.838816-5-thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Usually Meson uses pre-serialized information in meson-private to
speed up re-runs. This is not possible for version changes, where
Meson instead rebuilds the serialized information using cmd_line.txt.
In some cases cmd_line.txt can contain stale information, since it
is not rebuild except when "meson setup" is invoked. Update it in
the configure script to allow upgrading our Meson version.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Replace Windows specific macro with a more generic feature detection
macro. Allows slirp smb feature to be disabled manually as well.
Acked-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Joelle van Dyne <j@getutm.app>
Message-Id: <20210315180341.31638-5-j@getutm.app>
[Use $default_feature as the default. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
While docker is nominally multiarch these days it doesn't mean our
distros actually package all cross compilers for all architectures.
The upcoming Debian bullseye release will improve things further. At
least for now we can get things like the 32 bit ARM compiler on it's
64 bit cousin.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210401102530.12030-4-alex.bennee@linaro.org>
Commit "c87ea11631 configure: add --without-default-features" use
default_feature to set default values for configure option. This value
is used for EXESUF too.
However, EXESUF is not option to be tested, it is just append to any
binary name so using --without-default-features set EXESUF to "n"o and
all binaries using it has form <name>no (e.g. qemu-imgno).
This is not expected behavior as disabling features should not cause
generating different binary names.
Reverting back to setting EXESUF to empty value unless needed otherwise.
Signed-off-by: Miroslav Rezanina <mrezanin@redhat.com>
Message-Id: <20210331081845.105089-1-mrezanin@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The test for 128-bit atomics is causing trouble with FreeBSD 12.2 and
--enable-werror:
cc -Werror -fPIE -DPIE -std=gnu99 -Wall -m64 -mcx16 -D_GNU_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -Wstrict-prototypes -Wredundant-decls -Wundef -Wwrite-strings -Wmissing-prototypes -fno-strict-aliasing -fno-common -fwrapv -Wold-style-definition -Wtype-limits -Wformat-security -Wformat-y2k -Winit-self -Wignored-qualifiers -Wempty-body -Wnested-externs -Wendif-labels -Wexpansion-to-defined -Wno-initializer-overrides -Wno-missing-include-dirs -Wno-shift-negative-value -Wno-string-plus-int -Wno-typedef-redefinition -Wno-tautological-type-limit-compare -fstack-protector-strong -o config-temp/qemu-conf.exe config-temp/qemu-conf.c -pie -Wl,-z,relro -Wl,-z,now -m64 -fstack-protector-strong
config-temp/qemu-conf.c:4:7: error: implicit declaration of function '__atomic_load_16' is invalid in C99 [-Werror,-Wimplicit-function-declaration]
y = __atomic_load_16(&x, 0);
^
config-temp/qemu-conf.c:5:3: error: implicit declaration of function '__atomic_store_16' is invalid in C99 [-Werror,-Wimplicit-function-declaration]
__atomic_store_16(&x, y, 0);
^
config-temp/qemu-conf.c:5:3: note: did you mean '__atomic_load_16'?
config-temp/qemu-conf.c:4:7: note: '__atomic_load_16' declared here
y = __atomic_load_16(&x, 0);
^
config-temp/qemu-conf.c:6:3: error: implicit declaration of function '__atomic_compare_exchange_16' is invalid in C99 [-Werror,-Wimplicit-function-declaration]
__atomic_compare_exchange_16(&x, &y, x, 0, 0, 0);
^
3 errors generated.
Looking for they way we are using atomic functions in QEMU, we are not
using these functions with the _16 suffix anyway. Switch to the same
functions that we use in the include/qemu/atomic.h header.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210317110512.583747-2-thuth@redhat.com>
Message-Id: <20210323165308.15244-12-alex.bennee@linaro.org>
In bbc17caf81, we used an alias attribute to allow target_page
to be declared const, and yet be initialized late.
This fails when using LTO with several versions of gcc.
The compiler looks through the alias and decides that the const
variable is statically initialized to zero, then propagates that
zero to many uses of the variable.
This can be avoided by compiling one object file with -fno-lto.
In this way, any initializer cannot be seen, and the constant
propagation does not occur.
Since we are certain to have this separate compilation unit, we
can drop the alias attribute as well. We simply have differing
declarations for target_page in different compilation units.
Drop the use of init_target_page, and drop the configure detection
for CONFIG_ATTRIBUTE_ALIAS.
In order to change the compilation flags for a file with meson,
we must use a static_library. This runs into specific_ss, where
we would need to create many static_library instances.
Fix this by splitting page-vary.c: the page-vary-common.c part is
compiled once as a static_library, while the page-vary.c part is
left in specific_ss in order to handle the target-specific value
of TARGET_PAGE_BITS_MIN.
Reported-by: Gavin Shan <gshan@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210321211534.2101231-1-richard.henderson@linaro.org>
[PMD: Fix typo in subject, split original patch in 3]
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Gavin Shan <gshan@redhat.com>
Message-Id: <20210322112427.4045204-4-f4bug@amsat.org>
[rth: Update MAINTAINERS]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
local directive make the configure fails on these systems.
Signed-off-by: David Carlier <devnexen@gmail.com>
Message-Id: <CA+XhMqy95D8X-QvBcEfL=a-Rkgy6aJtheskkqZwQkreru+T_Wg@mail.gmail.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Now, compilation of util/dbus is implicit and depends
on libgio presence on the building host.
The patch adds options to manage libgio dependencies explicitly.
Signed-off-by: Denis Plotnikov <den-plotnikov@yandex-team.ru>
Message-Id: <20210312151440.405776-1-den-plotnikov@yandex-team.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
TILE-Gx was only implemented in linux-user mode, but support for this CPU
was removed from the upstream Linux kernel in 2018, and it has also been
dropped from glibc, so there is no new Linux development taking place with
this architecture. For running the old binaries, users can simply use older
versions of QEMU.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20210224183952.80463-1-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
This has the following visible changes:
- GBM is required only for OpenGL dma-buf.
- X11 is explicitly required by gtk-egl.
- EGL is now mandatory for the OpenGL displays.
The last one needs some detailed description. Before this change,
EGL was tested only for OpenGL dma-buf with the check of
EGL_MESA_image_dma_buf_export. However, all of the OpenGL
displays depend on EGL and EGL_MESA_image_dma_buf_export is always
defined by epoxy's EGL interface.
Therefore, it makes more sense to always check the presence of EGL
and say the OpenGL displays are available along with OpenGL dma-buf
if it is present.
Signed-off-by: Akihiko Odaki <akihiko.odaki@gmail.com>
Message-Id: <20210223060307.87736-1-akihiko.odaki@gmail.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
With --enable-fuzzing, QEMU_CFLAGS include -fsanitize=fuzzer-no-link.
This should allow us to build non-fuzzer binaries using objects
instrumented for fuzzing. However, to do that, we also need to link with
-fsanitize=fuzzer-no-link. We were not doing that.
Reported-by: Li Qiang <liq3ea@163.com>,
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Message-Id: <20210221174510.22542-1-alxndr@bu.edu>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add configuration options to enable or disable multiprocess QEMU code
Signed-off-by: John G Johnson <john.g.johnson@oracle.com>
Signed-off-by: Jagannathan Raman <jag.raman@oracle.com>
Signed-off-by: Elena Ufimtseva <elena.ufimtseva@oracle.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 6cc37253e35418ebd7b675a31a3df6e3c7a12dc1.1611938319.git.jag.raman@oracle.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Users might want to enable all features, without realizing some
features have negative effect. Mention the TCI feature is slow
and experimental, hoping it will be selected knowingly.
Suggested-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20210125144530.2837481-3-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
For SVE, currently the bulk of the GDB TCG tests, we need at least GDB
9.1 to support the "ieee_half" data type we report. This only affects
when GDB tests are run; users can still use lower versions of gdb as
long as they aren't talking to an SVE enabled model. The work around
is to either get a newer gdb or disable SVE for their CPU model.
Reported-by: Claudio Fontana <cfontana@suse.de>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Cc: Luis Machado <luis.machado@linaro.org>
Message-Id: <20210202134001.25738-9-alex.bennee@linaro.org>
When checking GDB versions we have to tolerate all sorts of random
distro extensions to the version string. While we already attempt to
do some of that before we call version_ge is makes sense to try and
regularise the first input by stripping extraneous -'s. While we at it
convert the old-style shell quoting into a cleaner form t shut up my
editors linter lest it confuse me by underlining the whole line.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20210202134001.25738-8-alex.bennee@linaro.org>
The configure option was backward, and we failed to
pass the value on to meson.
Fixes: 23a77b2d18 ("build-system: clean up TCG/TCI configury")
Tested-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
to allow improved control over use of git submodules
* Deprecate the -enable-fips option
* Ensure docs use prefer format for bool options
* Clarify platform support rules
* Misc fixes to keymap conversions
* Fix misc problems on macOS
-----BEGIN PGP SIGNATURE-----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=g6bC
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/berrange-gitlab/tags/misc-fixes-pull-request' into staging
* Replace --enable/disable-git-update with --with-git-submodules
to allow improved control over use of git submodules
* Deprecate the -enable-fips option
* Ensure docs use prefer format for bool options
* Clarify platform support rules
* Misc fixes to keymap conversions
* Fix misc problems on macOS
# gpg: Signature made Fri 29 Jan 2021 17:10:13 GMT
# gpg: using RSA key DAF3A6FDB26B62912D0E8E3FBE86EBB415104FDF
# gpg: Good signature from "Daniel P. Berrange <dan@berrange.com>" [full]
# gpg: aka "Daniel P. Berrange <berrange@redhat.com>" [full]
# Primary key fingerprint: DAF3 A6FD B26B 6291 2D0E 8E3F BE86 EBB4 1510 4FDF
* remotes/berrange-gitlab/tags/misc-fixes-pull-request:
tests: Replace deprecated ASN1 code
tests: Fix runtime error in test-authz-pam
ui: update keycodemapdb submodule commit
crypto: Add spaces around operator
configure: replace --enable/disable-git-update with --with-git-submodules
docs: fix missing backslash in certtool shell example
docs: simplify and clarify the platform support rules
Prefer 'on' | 'off' over 'yes' | 'no' for bool options
os: deprecate the -enable-fips option and QEMU's FIPS enforcement
crypto: Fix memory leaks in set_loaded for tls-*
crypto: Forbid broken unloading of secrets
crypto: Move USER_CREATABLE to secret_common base class
crypto: Fix some code style problems, add spaces around operator
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Replace the --enable-git-update and --disable-git-update configure params
with the param --with-git-submodules=(update|validate|ignore) to
allow 3 options for building from a git repo.
This is needed because downstream packagers, e.g. Debian, Ubuntu, etc,
also keep the source code in git, but do not want to enable the
'git_update' mode; with the current code, that's not possible even
if the downstream package specifies --disable-git-update.
The previous parameters are deprecated but still available; the
--enable-git-update parameter maps to --with-git-submodules=update and
--disable-git-update parameter maps to --with-git-submodules=validate.
The configure script behavior is slightly modified, where previously
the dtc, capstone, and slirp submodules were not validated when
--disable-git-update was specified (but were updated with git-update
enabled), now they are validated when using --with-git-submodules=validate
and are only ignored when using --with-git-submodules=ignore.
Signed-off-by: Dan Streetman <ddstreet@canonical.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
A workaround added in early days of 64-bit OSX forced x86_64 if the
host machine had 64-bit support. This creates issues when cross-
compiling for ARM64. Additionally, the user can always use --cpu=* to
manually set the host CPU and therefore this workaround should be
removed.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Joelle van Dyne <j@getutm.app>
Message-id: 20210126012457.39046-12-j@getutm.app
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
On iOS there is no CoreAudio, so we should not assume Darwin always
has it.
Signed-off-by: Joelle van Dyne <j@getutm.app>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20210126012457.39046-11-j@getutm.app
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
