Commit Graph

72 Commits

Author SHA1 Message Date
Bin Meng
139177b1d4 hw/riscv: sifive_u: Remove the riscv_ prefix of the soc* functions
To keep consistency with the machine* functions, remove the riscv_
prefix of the soc* functions.

Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 1590072147-13035-1-git-send-email-bmeng.cn@gmail.com
Message-Id: <1590072147-13035-1-git-send-email-bmeng.cn@gmail.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-06-03 09:11:51 -07:00
Markus Armbruster
d2623129a7 qom: Drop parameter @errp of object_property_add() & friends
The only way object_property_add() can fail is when a property with
the same name already exists.  Since our property names are all
hardcoded, failure is a programming error, and the appropriate way to
handle it is passing &error_abort.

Same for its variants, except for object_property_add_child(), which
additionally fails when the child already has a parent.  Parentage is
also under program control, so this is a programming error, too.

We have a bit over 500 callers.  Almost half of them pass
&error_abort, slightly fewer ignore errors, one test case handles
errors, and the remaining few callers pass them to their own callers.

The previous few commits demonstrated once again that ignoring
programming errors is a bad idea.

Of the few ones that pass on errors, several violate the Error API.
The Error ** argument must be NULL, &error_abort, &error_fatal, or a
pointer to a variable containing NULL.  Passing an argument of the
latter kind twice without clearing it in between is wrong: if the
first call sets an error, it no longer points to NULL for the second
call.  ich9_pm_add_properties(), sparc32_ledma_realize(),
sparc32_dma_realize(), xilinx_axidma_realize(), xilinx_enet_realize()
are wrong that way.

When the one appropriate choice of argument is &error_abort, letting
users pick the argument is a bad idea.

Drop parameter @errp and assert the preconditions instead.

There's one exception to "duplicate property name is a programming
error": the way object_property_add() implements the magic (and
undocumented) "automatic arrayification".  Don't drop @errp there.
Instead, rename object_property_add() to object_property_try_add(),
and add the obvious wrapper object_property_add().

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200505152926.18877-15-armbru@redhat.com>
[Two semantic rebase conflicts resolved]
2020-05-15 07:07:58 +02:00
Markus Armbruster
7eecec7d12 qom: Drop object_property_set_description() parameter @errp
object_property_set_description() and
object_class_property_set_description() fail only when property @name
is not found.

There are 85 calls of object_property_set_description() and
object_class_property_set_description().  None of them can fail:

* 84 immediately follow the creation of the property.

* The one in spapr_rng_instance_init() refers to a property created in
  spapr_rng_class_init(), from spapr_rng_properties[].

Every one of them still gets to decide what to pass for @errp.

51 calls pass &error_abort, 32 calls pass NULL, one receives the error
and propagates it to &error_abort, and one propagates it to
&error_fatal.  I'm actually surprised none of them violates the Error
API.

What are we gaining by letting callers handle the "property not found"
error?  Use when the property is not known to exist is simpler: you
don't have to guard the call with a check.  We haven't found such a
use in 5+ years.  Until we do, let's make life a bit simpler and drop
the @errp parameter.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200505152926.18877-8-armbru@redhat.com>
[One semantic rebase conflict resolved]
2020-05-15 07:06:49 +02:00
Anup Patel
02777ac303 hw/riscv: Add optional symbol callback ptr to riscv_load_firmware()
This patch adds an optional function pointer, "sym_cb", to
riscv_load_firmware() which provides the possibility to access
the symbol table during kernel loading.

The pointer is ignored, if supplied with flat (non-elf) firmware image.

The Spike board requires it locate the HTIF symbols from firmware ELF
passed via "-bios" option.

Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20200427080644.168461-2-anup.patel@wdc.com
Message-Id: <20200427080644.168461-2-anup.patel@wdc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-04-29 13:16:38 -07:00
Bin Meng
e883e9927a hw/riscv: Generate correct "mmu-type" for 32-bit machines
32-bit machine should have its CPU's "mmu-type" set to "riscv,sv32".

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 1583585319-26603-1-git-send-email-bmeng.cn@gmail.com
Message-Id: <1583585319-26603-1-git-send-email-bmeng.cn@gmail.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-04-29 13:16:37 -07:00
Bin Meng
3ca109c3f8 riscv/sifive_u: Add a serial property to the sifive_u machine
At present the board serial number is hard-coded to 1, and passed
to OTP model during initialization. Firmware (FSBL, U-Boot) uses
the serial number to generate a unique MAC address for the on-chip
ethernet controller. When multiple QEMU 'sifive_u' instances are
created and connected to the same subnet, they all have the same
MAC address hence it creates a unusable network.

A new "serial" property is introduced to specify the board serial
number. When not given, the default serial number 1 is used.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <1573916930-19068-1-git-send-email-bmeng.cn@gmail.com>
[ Changed by AF:
 - Use the SoC's serial property to pass the info to the SoC
 - Fixup commit title
 - Rebase on file restructuring
]
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-04-29 13:16:36 -07:00
Alistair Francis
fda5b000fa riscv/sifive_u: Add a serial property to the sifive_u SoC
At present the board serial number is hard-coded to 1, and passed
to OTP model during initialization. Firmware (FSBL, U-Boot) uses
the serial number to generate a unique MAC address for the on-chip
ethernet controller. When multiple QEMU 'sifive_u' instances are
created and connected to the same subnet, they all have the same
MAC address hence it creates a unusable network.

A new "serial" property is introduced to the sifive_u SoC to specify
the board serial number. When not given, the default serial number
1 is used.

Suggested-by: Bin Meng <bmeng.cn@gmail.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
2020-04-29 13:16:36 -07:00
Alistair Francis
523e346467 riscv/sifive_u: Fix up file ordering
Split the file into clear machine and SoC sections.

Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-04-29 13:16:35 -07:00
Philippe Mathieu-Daudé
78ee6bd048 various: Remove suspicious '\' character outside of #define in C code
Fixes the following coccinelle warnings:

  $ spatch --sp-file --verbose-parsing  ... \
      scripts/coccinelle/remove_local_err.cocci
  ...
  SUSPICIOUS: a \ character appears outside of a #define at ./target/ppc/translate_init.inc.c:5213
  SUSPICIOUS: a \ character appears outside of a #define at ./target/ppc/translate_init.inc.c:5261
  SUSPICIOUS: a \ character appears outside of a #define at ./target/microblaze/cpu.c:166
  SUSPICIOUS: a \ character appears outside of a #define at ./target/microblaze/cpu.c:167
  SUSPICIOUS: a \ character appears outside of a #define at ./target/microblaze/cpu.c:169
  SUSPICIOUS: a \ character appears outside of a #define at ./target/microblaze/cpu.c:170
  SUSPICIOUS: a \ character appears outside of a #define at ./target/microblaze/cpu.c:171
  SUSPICIOUS: a \ character appears outside of a #define at ./target/microblaze/cpu.c:172
  SUSPICIOUS: a \ character appears outside of a #define at ./target/microblaze/cpu.c:173
  SUSPICIOUS: a \ character appears outside of a #define at ./target/i386/cpu.c:5787
  SUSPICIOUS: a \ character appears outside of a #define at ./target/i386/cpu.c:5789
  SUSPICIOUS: a \ character appears outside of a #define at ./target/i386/cpu.c:5800
  SUSPICIOUS: a \ character appears outside of a #define at ./target/i386/cpu.c:5801
  SUSPICIOUS: a \ character appears outside of a #define at ./target/i386/cpu.c:5802
  SUSPICIOUS: a \ character appears outside of a #define at ./target/i386/cpu.c:5804
  SUSPICIOUS: a \ character appears outside of a #define at ./target/i386/cpu.c:5805
  SUSPICIOUS: a \ character appears outside of a #define at ./target/i386/cpu.c:5806
  SUSPICIOUS: a \ character appears outside of a #define at ./target/i386/cpu.c:6329
  SUSPICIOUS: a \ character appears outside of a #define at ./hw/sd/sdhci.c:1133
  SUSPICIOUS: a \ character appears outside of a #define at ./hw/scsi/scsi-disk.c:3081
  SUSPICIOUS: a \ character appears outside of a #define at ./hw/net/virtio-net.c:1529
  SUSPICIOUS: a \ character appears outside of a #define at ./hw/riscv/sifive_u.c:468
  SUSPICIOUS: a \ character appears outside of a #define at ./dump/dump.c:1895
  SUSPICIOUS: a \ character appears outside of a #define at ./block/vhdx.c:2209
  SUSPICIOUS: a \ character appears outside of a #define at ./block/vhdx.c:2215
  SUSPICIOUS: a \ character appears outside of a #define at ./block/vhdx.c:2221
  SUSPICIOUS: a \ character appears outside of a #define at ./block/vhdx.c:2222
  SUSPICIOUS: a \ character appears outside of a #define at ./block/replication.c:172
  SUSPICIOUS: a \ character appears outside of a #define at ./block/replication.c:173

Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20200412223619.11284-2-f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2020-04-29 08:01:51 +02:00
Peter Maydell
d649689a8e * Bugfixes all over the place
* get/set_uint cleanups (Felipe)
 * Lock guard support (Stefan)
 * MemoryRegion ownership cleanup (Philippe)
 * AVX512 optimization for buffer_is_zero (Robert)
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQEcBAABAgAGBQJecOZiAAoJEL/70l94x66DgGkH/jpY4IgqlSAAWCgaxfe1n1vg
 ahSzSLrC8wiJq2Jxbmxn+5BbH6BxQ9ibflsY5bvCY/sTb7UlOFCPkFhQ2iUgplkw
 ciB5UfgCA6OHpKEhpHhXtzlybtNOlxXNWYJ1SrcVXbRES8f7XdhMKs15mnJJuOOE
 k/tuZo/44yZRJl0Cv+nkvIFcCVgyu1q0Lln/1MMPngY2r9gt893cY9feTBSSWgnp
 +7HZr5TXI7mcIytczFKzbdujlG4391DGejKX66IIxGcWg9vXS7TwAStzH1vSKVfJ
 73SKZBoCU5gpHHHC+dqVyouMerV+UE+WQPNtF+LCsNgJBw/2NXc1ZgDrtz1OI2c=
 =+LRX
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging

* Bugfixes all over the place
* get/set_uint cleanups (Felipe)
* Lock guard support (Stefan)
* MemoryRegion ownership cleanup (Philippe)
* AVX512 optimization for buffer_is_zero (Robert)

# gpg: Signature made Tue 17 Mar 2020 15:01:54 GMT
# gpg:                using RSA key BFFBD25F78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg:                 aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4  E2F7 7E15 100C CD36 69B1
#      Subkey fingerprint: F133 3857 4B66 2389 866C  7682 BFFB D25F 78C7 AE83

* remotes/bonzini/tags/for-upstream: (62 commits)
  hw/arm: Let devices own the MemoryRegion they create
  hw/arm: Remove unnecessary memory_region_set_readonly() on ROM alias
  hw/ppc/ppc405: Use memory_region_init_rom() with read-only regions
  hw/arm/stm32: Use memory_region_init_rom() with read-only regions
  hw/char: Let devices own the MemoryRegion they create
  hw/riscv: Let devices own the MemoryRegion they create
  hw/dma: Let devices own the MemoryRegion they create
  hw/display: Let devices own the MemoryRegion they create
  hw/core: Let devices own the MemoryRegion they create
  scripts/cocci: Patch to let devices own their MemoryRegions
  scripts/cocci: Patch to remove unnecessary memory_region_set_readonly()
  scripts/cocci: Patch to detect potential use of memory_region_init_rom
  hw/sparc: Use memory_region_init_rom() with read-only regions
  hw/sh4: Use memory_region_init_rom() with read-only regions
  hw/riscv: Use memory_region_init_rom() with read-only regions
  hw/ppc: Use memory_region_init_rom() with read-only regions
  hw/pci-host: Use memory_region_init_rom() with read-only regions
  hw/net: Use memory_region_init_rom() with read-only regions
  hw/m68k: Use memory_region_init_rom() with read-only regions
  hw/display: Use memory_region_init_rom() with read-only regions
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-03-17 18:33:05 +00:00
Philippe Mathieu-Daudé
414c47d234 hw/riscv: Let devices own the MemoryRegion they create
Avoid orphan memory regions being added in the /unattached QOM
container.

This commit was produced with the Coccinelle script
scripts/coccinelle/memory-region-housekeeping.cocci.

Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2020-03-17 15:18:49 +01:00
Bin Meng
b78c329631
riscv: sifive_u: Update BIOS_FILENAME for 32-bit
Update BIOS_FILENAME to consider 32-bit bios image file name.

Tested booting Linux v5.5 32-bit image (built from rv32_defconfig
plus CONFIG_SOC_SIFIVE) with the default 32-bit bios image.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-03-16 17:03:49 -07:00
Anup Patel
5f3616ccce
hw/riscv: Provide rdtime callback for TCG in CLINT emulation
This patch extends CLINT emulation to provide rdtime callback for
TCG. This rdtime callback will be called wheneven TIME CSRs are
read in privileged modes.

Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-02-27 13:46:37 -08:00
Pan Nengyuan
bb8136df69
riscv/sifive_u: fix a memory leak in soc_realize()
Fix a minor memory leak in riscv_sifive_u_soc_realize()

Reported-by: Euler Robot <euler.robot@huawei.com>
Signed-off-by: Pan Nengyuan <pannengyuan@huawei.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-01-16 10:02:40 -08:00
Zhuang, Siwei (Data61, Kensington NSW)
6478dd745d hw/riscv: Add optional symbol callback ptr to riscv_load_kernel()
This patch adds an optional function pointer, "sym_cb", to
riscv_load_kernel() which provides the possibility to access the symbol
table during kernel loading.

The pointer is ignored, if supplied with Image or uImage file.

The Spike board requires the access to locate the HTIF symbols.

Fixes: 0ac24d56c5 ("hw/riscv: Split out the boot functions")
Buglink: https://bugs.launchpad.net/qemu/+bug/1835827
Signed-off-by: Siwei Zhuang <siwei.zhuang@data61.csiro.au>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2019-11-25 12:34:52 -08:00
Alistair Francis
fc41ae230e
riscv/sifive_u: Add the start-in-flash property
Add a property that when set to true QEMU will jump from the ROM code to
the start of flash memory instead of DRAM which is the default
behaviour.

Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-10-28 07:47:28 -07:00
Alistair Francis
687caef13d
riscv/sifive_u: Manually define the machine
Instead of using the DEFINE_MACHINE() macro to define the machine let's
do it manually. This allows us to specify machine properties.

This patch is no functional change.

Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-10-28 07:47:28 -07:00
Alistair Francis
1b3a230870
riscv/sifive_u: Add QSPI memory region
The HiFive Unleashed uses is25wp256 SPI NOR flash. There is currently no
model of this in QEMU, so to allow boot firmware developers to use QEMU
to target the Unleashed let's add a chunk of memory to represent the QSPI0
memory mapped flash. This can be targeted using QEMU's -device loader
command line option.

In the future we can look at adding a model for the is25wp256 flash.

Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-10-28 07:47:28 -07:00
Alistair Francis
a6902ef0e3
riscv/sifive_u: Add L2-LIM cache memory
On reset only a single L2 cache way is enabled, the others are exposed
as memory that can be used by early boot firmware. This L2 region is
generally disabled using the WayEnable register at a later stage in the
boot process. To allow firmware to target QEMU and the HiFive Unleashed
let's add the L2 LIM (LooselyIntegrated Memory).

Ideally we would want to adjust the size of this chunk of memory as the
L2 Cache Controller WayEnable register is incremented. Unfortunately I
don't see a nice way to handle reducing or blocking out the L2 LIM while
still allowing it be re returned to all enabled from a reset.

Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-10-28 07:47:27 -07:00
Bin Meng
c3a28b5d04
riscv: sifive_u: Add ethernet0 to the aliases node
U-Boot expects this alias to be in place in order to fix up the mac
address of the ethernet node.

This is to keep in sync with Linux kernel commit below:
https://patchwork.kernel.org/patch/11133033/

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-10-28 07:47:27 -07:00
Bin Meng
7ae05377b8
riscv: hw: Drop "clock-frequency" property of cpu nodes
The "clock-frequency" property of cpu nodes isn't required. Drop it.

This is to keep in sync with Linux kernel commit below:
https://patchwork.kernel.org/patch/11133031/

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-10-28 07:47:27 -07:00
Bin Meng
d372e7486f
riscv: sifive_u: Update model and compatible strings in device tree
This updates model and compatible strings to use the same strings
as used in the Linux kernel device tree (hifive-unleashed-a00.dts).

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-09-17 08:42:49 -07:00
Bin Meng
81e94379f7
riscv: sifive_u: Remove handcrafted clock nodes for UART and ethernet
In the past we did not have a model for PRCI, hence two handcrafted
clock nodes ("/soc/ethclk" and "/soc/uartclk") were created for the
purpose of supplying hard-coded clock frequencies. But now since we
have added the PRCI support in QEMU, we don't need them any more.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-09-17 08:42:49 -07:00
Bin Meng
7b6bb66f02
riscv: sifive_u: Fix broken GEM support
At present the GEM support in sifive_u machine is seriously broken.
The GEM block register base was set to a weird number (0x100900FC),
which for no way could work with the cadence_gem model in QEMU.

Not like other GEM variants, the FU540-specific GEM has a management
block to control 10/100/1000Mbps link speed changes, that is mapped
to 0x100a0000. We can simply map it into MMIO space without special
handling using create_unimplemented_device().

Update the GEM node compatible string to use the official name used
by the upstream Linux kernel, and add the management block reg base
& size to the <reg> property encoding.

Tested with upstream U-Boot and Linux kernel MACB drivers.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-09-17 08:42:49 -07:00
Bin Meng
5461c4fefe
riscv: sifive_u: Instantiate OTP memory with a serial number
This adds an OTP memory with a given serial number to the sifive_u
machine. With such support, the upstream U-Boot for sifive_fu540
boots out of the box on the sifive_u machine.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-09-17 08:42:49 -07:00
Bin Meng
5f7134d3b3
riscv: sifive_u: Change UART node name in device tree
OpenSBI for fu540 does DT fix up (see fu540_modify_dt()) by updating
chosen "stdout-path" to point to "/soc/serial@...", and U-Boot will
use this information to locate the serial node and probe its driver.
However currently we generate the UART node name as "/soc/uart@...",
causing U-Boot fail to find the serial node in DT.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-09-17 08:42:48 -07:00
Bin Meng
4b55bc2b5f
riscv: sifive_u: Update UART base addresses and IRQs
This updates the UART base address and IRQs to match the hardware.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Jonathan Behrens <fintelia@gmail.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Chih-Min Chao <chihmin.chao@sifive.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-09-17 08:42:48 -07:00
Bin Meng
806c64b7b0
riscv: sifive_u: Reference PRCI clocks in UART and ethernet nodes
Now that we have added a PRCI node, update existing UART and ethernet
nodes to reference PRCI as their clock sources, to keep in sync with
the Linux kernel device tree.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-09-17 08:42:48 -07:00
Bin Meng
af14c84041
riscv: sifive_u: Add PRCI block to the SoC
Add PRCI mmio base address and size mappings to sifive_u machine,
and generate the corresponding device tree node.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-09-17 08:42:48 -07:00
Bin Meng
e1724d09a6
riscv: sifive_u: Generate hfclk and rtcclk nodes
To keep in sync with Linux kernel device tree, generate hfclk and
rtcclk nodes in the device tree, to be referenced by PRCI node.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-09-17 08:42:48 -07:00
Bin Meng
ef965ce239
riscv: sifive_u: Update PLIC hart topology configuration string
With heterogeneous harts config, the PLIC hart topology configuration
string are "M,MS,.." because of the monitor hart #0.

Suggested-by: Fabien Chouteau <chouteau@adacore.com>
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-09-17 08:42:47 -07:00
Bin Meng
ecdfe393b6
riscv: sifive_u: Update hart configuration to reflect the real FU540 SoC
The FU540-C000 includes a 64-bit E51 RISC-V core and four 64-bit U54
RISC-V cores. Currently the sifive_u machine only populates 4 U54
cores. Update the max cpu number to 5 to reflect the real hardware,
by creating 2 CPU clusters as containers for RISC-V hart arrays to
populate heterogeneous harts.

The cpu nodes in the generated DTS have been updated as well.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-09-17 08:42:47 -07:00
Bin Meng
f3d47d5804
riscv: sifive_u: Set the minimum number of cpus to 2
It is not useful if we only have one management CPU.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
[Palmer: Set default CPUs to 2]
Reviewed-by: Palmer Dabbelt <palmer@sifive.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-09-17 08:42:47 -07:00
Bin Meng
9baa9f7c9f
riscv: sifive_u: Remove the unnecessary include of prci header
sifive_u machine does not use PRCI as of today. Remove the prci
header inclusion.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-09-17 08:42:45 -07:00
Bin Meng
9f79638ec5
riscv: hw: Change create_fdt() to return void
There is no need to return fdt at the end of create_fdt() because
it's already saved in s->fdt.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Chih-Min Chao <chihmin.chao@sifive.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-09-17 08:42:45 -07:00
Bin Meng
b179685b6a
riscv: hw: Remove not needed PLIC properties in device tree
This removes "reg-names" and "riscv,max-priority" properties of the
PLIC node from device tree.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Jonathan Behrens <fintelia@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-09-17 08:42:44 -07:00
Bin Meng
04e7edd108
riscv: hw: Use qemu_fdt_setprop_cell() for property with only 1 cell
Some of the properties only have 1 cell so we should use
qemu_fdt_setprop_cell() instead of qemu_fdt_setprop_cells().

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-09-17 08:42:44 -07:00
Bin Meng
24e398d06b
riscv: hw: Remove superfluous "linux, phandle" property
"linux,phandle" property is optional. Remove all instances in the
sifive_u, virt and spike machine device trees.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-09-17 08:42:44 -07:00
Guenter Roeck
04ece4f820
riscv: sifive_u: Fix clock-names property for ethernet node
The correct property name is clock-names, not clocks-names.

Without this patch, the Ethernet driver fails to instantiate with
the following error.

macb 100900fc.ethernet: failed to get macb_clk (-2)
macb: probe of 100900fc.ethernet failed with error -2

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-09-17 08:42:42 -07:00
Guenter Roeck
44e6dcd30a
riscv: sivive_u: Add dummy serial clock and aliases entry for uart
The riscv uart needs valid clocks. This requires a refereence
to the clock node. Since the SOC clock is not emulated by qemu,
add a reference to a fixed clock instead. The clock-frequency
entry in the uart node does not seem to be necessary, so drop it.

In addition to a reference to the clock, the driver also needs
an aliases entry for the serial node. Add it as well.

Without this patch, the serial driver fails to instantiate with
the following error message.

sifive-serial 10013000.uart: unable to find controller clock
sifive-serial: probe of 10013000.uart failed with error -2

when trying to boot Linux.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-09-17 08:42:42 -07:00
Guenter Roeck
0f8d446249
riscv: sifive_u: Add support for loading initrd
Add support for loading initrd with "-initrd <filename>"
to the sifive_u machine. This lets us boot into Linux without
disk drive.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-09-17 08:42:39 -07:00
Markus Armbruster
46517dd497 Include sysemu/sysemu.h a lot less
In my "build everything" tree, changing sysemu/sysemu.h triggers a
recompile of some 5400 out of 6600 objects (not counting tests and
objects that don't depend on qemu/osdep.h).

hw/qdev-core.h includes sysemu/sysemu.h since recent commit e965ffa70a
"qdev: add qdev_add_vm_change_state_handler()".  This is a bad idea:
hw/qdev-core.h is widely included.

Move the declaration of qdev_add_vm_change_state_handler() to
sysemu/sysemu.h, and drop the problematic include from hw/qdev-core.h.

Touching sysemu/sysemu.h now recompiles some 1800 objects.
qemu/uuid.h also drops from 5400 to 1800.  A few more headers show
smaller improvement: qemu/notify.h drops from 5600 to 5200,
qemu/timer.h from 5600 to 4500, and qapi/qapi-types-run-state.h from
5500 to 5000.

Cc: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20190812052359.30071-28-armbru@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
2019-08-16 13:31:53 +02:00
Markus Armbruster
650d103d3e Include hw/hw.h exactly where needed
In my "build everything" tree, changing hw/hw.h triggers a recompile
of some 2600 out of 6600 objects (not counting tests and objects that
don't depend on qemu/osdep.h).

The previous commits have left only the declaration of hw_error() in
hw/hw.h.  This permits dropping most of its inclusions.  Touching it
now recompiles less than 200 objects.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20190812052359.30071-19-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-08-16 13:31:52 +02:00
Alistair Francis
fdd1bda4b4
hw/riscv: Load OpenSBI as the default firmware
If the user hasn't specified a firmware to load (with -bios) or
specified no bios (with -bios none) then load OpenSBI by default. This
allows users to boot a RISC-V kernel with just -kernel.

Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-07-18 14:18:45 -07:00
Like Xu
c447312747 hw/riscv: Replace global smp variables with machine smp properties
The global smp variables in riscv are replaced with smp machine properties.

A local variable of the same name would be introduced in the declaration
phase if it's used widely in the context OR replace it on the spot if it's
only used once. No semantic changes.

Signed-off-by: Like Xu <like.xu@linux.intel.com>
Message-Id: <20190518205428.90532-6-like.xu@linux.intel.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
[ehabkost: fix spike_board_init()]
[ehabkost: fix riscv_sifive_e_soc_init()]
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2019-07-05 17:07:42 -03:00
Alistair Francis
b30422231b
hw/riscv: Add support for loading a firmware
Add support for loading a firmware file for the virt machine and the
SiFive U. This can be run with the following command:

    qemu-system-riscv64 -machine virt -bios fw_jump.bin -kernel vmlinux

Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-06-27 02:47:06 -07:00
Alistair Francis
0ac24d56c5
hw/riscv: Split out the boot functions
Split the common RISC-V boot functions into a seperate file. This allows
us to share the common code.

Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-06-27 02:47:06 -07:00
Bin Meng
05446f4133
riscv: sifive_u: Update the plic hart config to support multicore
At present the PLIC is instantiated to support only one hart, while
the machine allows at most 4 harts to be created. When more than 1
hart is configured, PLIC needs to instantiated to support multicore,
otherwise an SMP OS does not work.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-06-27 02:47:06 -07:00
Bin Meng
382cb4392f
riscv: sifive_u: Do not create hard-coded phandles in DT
At present the cpu, plic and ethclk nodes' phandles are hard-coded
to 1/2/3 in DT. If we configure more than 1 cpu for the machine,
all cpu nodes' phandles conflict with each other as they are all 1.
Fix it by removing the hardcode.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-06-27 02:47:06 -07:00
Bin Meng
a9ec1c76d5
riscv: sifive_u: Correct UART0's IRQ in the device tree
The UART0's interrupt vector is wrongly set to 1 in the device tree.
Use SIFIVE_U_UART0_IRQ instead.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-03-19 05:18:42 -07:00