In ppc4xx_sdram_init() the struct is allocated with g_new0() so no
need to clear its elements. In the bamboo machine init memset can be
replaced with array initialiser which is shorter.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <529adc7705fb3e3e777439895bdaa136bacb9403.1664021647.git.balaton@eik.bme.hu>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
PLIC spec [1] requires interrupt source priority registers are WARL
field and the number of supported priority is power-of-2 to simplify SW
discovery.
Existing QEMU RISC-V machine (e.g. shakti_c) don't strictly follow PLIC
spec, whose number of supported priority is not power-of-2. Just change
each bit of interrupt priority register to WARL field when the number of
supported priority is power-of-2.
[1] https://github.com/riscv/riscv-plic-spec/blob/master/riscv-plic.adoc#interrupt-priorities
Signed-off-by: Jim Shu <jim.shu@sifive.com>
Reviewed-by: Clément Chigot <chigot@adacore.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20221003041440.2320-3-jim.shu@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The maximum priority level is hard-coded when writing to interrupt
priority register. However, when writing to priority threshold register,
the maximum priority level is from num_priorities Property which is
configured by platform.
Also change interrupt priority register to use num_priorities Property
in maximum priority level.
Signed-off-by: Emmanuel Blot <emmanuel.blot@sifive.com>
Signed-off-by: Jim Shu <jim.shu@sifive.com>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20221003041440.2320-2-jim.shu@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
To boot S-mode firmware payload like EDK2 from persistent
flash storage, qemu needs to pass the flash address as the
next_addr in fw_dynamic_info to the opensbi.
When both -kernel and -pflash options are provided in command line,
the kernel (and initrd if -initrd) will be copied to fw_cfg table.
The S-mode FW will load the kernel/initrd from fw_cfg table.
If only pflash is given but not -kernel, then it is the job of
of the S-mode firmware to locate and load the kernel.
In either case, update the kernel_entry with the flash address
so that the opensbi can jump to the entry point of the S-mode
firmware.
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20221004092351.18209-4-sunilvl@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
To enable both -kernel and -pflash options, the fw_cfg needs to be
created prior to loading the kernel.
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20221004092351.18209-3-sunilvl@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
load_image_to_fw_cfg() is duplicated by both arm and loongarch. The same
function will be required by riscv too. So, it's time to refactor and
move this function to a common path.
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20221004092351.18209-2-sunilvl@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
This patch adds the `rw1c` functionality to the respective
registers. The status fields are cleared when the respective
field is set.
Signed-off-by: Wilfred Mallawa <wilfred.mallawa@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220930033241.206581-3-wilfred.mallawa@opensource.wdc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
This patch addresses the coverity issues specified in [1],
as suggested, `FIELD_DP32()`/`FIELD_EX32()` macros have been
implemented to clean up the code.
[1] https://www.mail-archive.com/qemu-devel@nongnu.org/msg887713.html
Fixes: Coverity CID 1488107
Signed-off-by: Wilfred Mallawa <wilfred.mallawa@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Message-Id: <20220930033241.206581-2-wilfred.mallawa@opensource.wdc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Since commit 4211fc5532 ("roms/opensbi: Remove ELF images"), the
comment for qtest check in riscv_find_firmware() is out of date.
Update it to reflect the latest status.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <BN7PR08MB435525C92550BAC5467BE672BF219@BN7PR08MB4355.namprd08.prod.outlook.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
While being at it add a #define for the magic 0x1040 number.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Message-Id: <20221004112100.301935-6-kraxel@redhat.com>
Not needed for a virtio 1.0 device. virtio_pci_device_plugged()
overrides them anyway (so no functional change).
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-Id: <20221004112100.301935-3-kraxel@redhat.com>
Not needed for a virtio 1.0 device. virtio_pci_device_plugged()
overrides them anyway (so no functional change).
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Message-Id: <20221004112100.301935-2-kraxel@redhat.com>
SunOS expects CD-ROM devices to have a block size of 512, and will
fail to mount or install using QEMU's default block size of 2048.
When initializing the SCSI device, allow the `physical_block_size'
block device option to override the default block size.
Signed-off-by: John Millikin <john@john-millikin.com>
Message-Id: <20220804122950.1577012-1-john@john-millikin.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
No functional changes nor AML bytecode changes.
Consolidate code that generates empty and populated slot
descriptors. Besides eliminating duplication,
it helps consolidate conditions for generating
parts of Device{} desriptor in one place, which makes
code more compact and easier to read.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20220701133515.137890-18-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
no functional change, align order of fields in empty slot
descriptor with a populated slot ordering.
Expected diff:
- Name (_SUN, 0x0X) // _SUN: Slot User Number
Name (_ADR, 0xY) // _ADR: Address
...
+ Name (_SUN, 0xX) // _SUN: Slot User Number
that will eliminate contextual changes (causing test failures)
when follow up patches merge code generating populated and empty
slots descriptors.
Put mandatory _ADR as the 1st field, then ASUN as it can be
present for both pupulated and empty slots and only then _SUN
which is present only when slot is hotpluggable.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20220701133515.137890-13-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
add ASUN variable to hotpluggable slots and use it
instead of _SUN which has the same value to reuse
_DMS code on both branches (hot- and non-hotpluggable).
No functional change.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20220701133515.137890-10-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Numer of possible arguments to pass to a method is limited
in ACPI. The following patches will need to pass over more
parameters to PDSM method, will hit that limit.
Prepare for this by passing structure (Package) to method,
which let us workaround arguments limitation.
Pass to PDSM all standard arguments of _DSM as is, and
pack custom parameters into Package that is passed as
the last argument to PDSM.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20220701133515.137890-7-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
.., it will help with code readability and make easier
to extend method in followup patches
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20220701133515.137890-6-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
HPET AML doesn't depend on piix4 nor q35, move code buiding it
to common scope to avoid duplication.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20220701133515.137890-3-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
PATCH v1: add support for SMBIOS type 8 to qemu
PATCH v2: incorporate patch v1 feedback and add smbios type=8 to qemu-options
internal_reference: internal reference designator
external_reference: external reference designator
connector_type: hex value for port connector type (see SMBIOS 7.9.2)
port_type: hex value for port type (see SMBIOS 7.9.3)
After studying various vendor implementationsi (Dell, Lenovo, MSI),
the value of internal connector type was hard-coded to 0x0 (None).
Example usage:
-smbios type=8,internal_reference=JUSB1,external_reference=USB1,connector_type=0x12,port_type=0x10 \
-smbios type=8,internal_reference=JAUD1,external_reference="Audio Jack",connector_type=0x1f,port_type=0x1d \
-smbios type=8,internal_reference=LAN,external_reference=Ethernet,connector_type=0x0b,port_type=0x1f \
-smbios type=8,internal_reference=PS2,external_reference=Mouse,connector_type=0x0f,port_type=0x0e \
-smbios type=8,internal_reference=PS2,external_reference=Keyboard,connector_type=0x0f,port_type=0x0d
Signed-off-by: Hal Martin <hal.martin@gmail.com>
Message-Id: <20220812135153.17859-1-hal.martin@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This new command shows the information of a VirtQueue element.
[Note: Up until v10 of this patch series, virtio.json had many (15+)
enums defined (e.g. decoded device features, statuses, etc.). In v10
most of these enums were removed and replaced with string literals.
By doing this we get (1) simpler schema, (2) smaller generated code,
and (3) less maintenance burden for when new things are added (e.g.
devices, device features, etc.).]
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Jonah Palmer <jonah.palmer@oracle.com>
Message-Id: <1660220684-24909-6-git-send-email-jonah.palmer@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
These new commands show the internal status of a VirtIODevice's
VirtQueue and a vhost device's vhost_virtqueue (if active).
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Jonah Palmer <jonah.palmer@oracle.com>
Message-Id: <1660220684-24909-5-git-send-email-jonah.palmer@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Display feature names instead of bitmaps for host, guest, and
backend for VirtIODevices.
Display status names instead of bitmaps for VirtIODevices.
Display feature names instead of bitmaps for backend, protocol,
acked, and features (hdev->features) for vhost devices.
Decode features according to device ID. Decode statuses
according to configuration status bitmap (config_status_map).
Decode vhost user protocol features according to vhost user
protocol bitmap (vhost_user_protocol_map).
Transport features are on the first line. Undecoded bits (if
any) are stored in a separate field.
[Jonah: Several changes made to this patch from prev. version (v14):
- Moved all device features mappings to hw/virtio/virtio.c
- Renamed device features mappings (less generic)
- Generalized @FEATURE_ENTRY macro for all device mappings
- Virtio device feature map definitions include descriptions of
feature bits
- Moved @VHOST_USER_F_PROTOCOL_FEATURES feature bit from transport
feature map to vhost-user-supported device feature mappings
(blk, fs, i2c, rng, net, gpu, input, scsi, vsock)
- New feature bit added for virtio-vsock: @VIRTIO_VSOCK_F_SEQPACKET
- New feature bit added for virtio-iommu: @VIRTIO_IOMMU_F_BYPASS_CONFIG
- New feature bit added for virtio-mem: @VIRTIO_MEM_F_UNPLUGGED_INACCESSIBLE
- New virtio transport feature bit added: @VIRTIO_F_IN_ORDER
- Added device feature map definition for virtio-rng
]
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Jonah Palmer <jonah.palmer@oracle.com>
Message-Id: <1660220684-24909-4-git-send-email-jonah.palmer@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This new command shows the status of a VirtIODevice, including
its corresponding vhost device's status (if active).
Next patch will improve output by decoding feature bits, including
vhost device's feature bits (backend, protocol, acked, and features).
Also will decode status bits of a VirtIODevice.
[Jonah: From patch v12; added a check to @virtio_device_find to ensure
synchronicity between @virtio_list and the devices in the QOM
composition tree.]
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Jonah Palmer <jonah.palmer@oracle.com>
Message-Id: <1660220684-24909-3-git-send-email-jonah.palmer@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This new command lists all the instances of VirtIODevices with
their canonical QOM path and name.
[Jonah: @virtio_list duplicates information that already exists in
the QOM composition tree. However, extracting necessary information
from this tree seems to be a bit convoluted.
Instead, we still create our own list of realized virtio devices
but use @qmp_qom_get with the device's canonical QOM path to confirm
that the device exists and is realized. If the device exists but
is actually not realized, then we remove it from our list (for
synchronicity to the QOM composition tree).
Also, the QMP command @x-query-virtio is redundant as @qom-list
and @qom-get are sufficient to search '/machine/' for realized
virtio devices. However, @x-query-virtio is much more convenient
in listing realized virtio devices.]
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Jonah Palmer <jonah.palmer@oracle.com>
Message-Id: <1660220684-24909-2-git-send-email-jonah.palmer@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
It's true that when vcpus<=255 we don't require the length of 32bit APIC
IDs. However here since we already have EIM=ON it means the hypervisor
will declare the VM as x2apic supported (e.g. VT-d ECAP register will have
EIM bit 4 set), so the guest should assume the APIC IDs are 32bits width
even if vcpus<=255. In short, commit 77250171bd breaks any simple cmdline
that wants to boot a VM with >=9 but <=255 vcpus with:
-device intel-iommu,intremap=on
For anyone who does not want to enable x2apic, we can use eim=off in the
intel-iommu parameters to skip enabling KVM x2apic.
This partly reverts commit 77250171bd, while
keeping the valid bit on checking split irqchip, but revert the other change.
One thing to mention is that this patch may break migration compatibility
of such VM, however that's probably the best thing we can do, because the
old behavior was simply wrong and not working for >8 vcpus. For <=8 vcpus,
there could be a light guest ABI change (by enabling KVM x2apic after this
patch), but logically it shouldn't affect the migration from working.
Also, this is not the 1st commit to change x2apic behavior. Igor provided
a full history of how this evolved for the past few years:
https://lore.kernel.org/qemu-devel/20220922154617.57d1a1fb@redhat.com/
Relevant commits for reference:
fb506e701e ("intel_iommu: reject broken EIM", 2016-10-17)
c1bb5418e3 ("target/i386: Support up to 32768 CPUs without IRQ remapping", 2020-12-10)
77250171bd ("intel_iommu: Fix irqchip / X2APIC configuration checks", 2022-05-16)
dc89f32d92 ("target/i386: Fix sanity check on max APIC ID / X2APIC enablement", 2022-05-16)
We may want to have this for stable too (mostly for 7.1.0 only). Adding a
fixes tag.
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Claudio Fontana <cfontana@suse.de>
Cc: Igor Mammedov <imammedo@redhat.com>
Fixes: 77250171bd ("intel_iommu: Fix irqchip / X2APIC configuration checks")
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20220926153206.10881-1-peterx@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
The Device Serial Number Extended Capability PCI r6.0 sec 7.9.3
provides a standard way to provide a device serial number as
an IEEE defined 64-bit extended unique identifier EUI-64.
CXL 2.0 section 8.1.12.2 Memory Device PCIe Capabilities and
Extended Capabilities requires this to be used to uniquely
identify CXL memory devices.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20220923161835.9805-1-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Ben Widawsky <bwidawsk@kernel.org>
Per the ACPI 6.5 specification, on the GTDT Table Structure, the Counter Control
Block Address and Counter Read Block Address fields of the GTDT table should be
set to 0xFFFFFFFFFFFFFFFF if not provided, rather than 0x0.
Fixes: 41041e5708 ("acpi: arm/virt: build_gtdt: use acpi_table_begin()/acpi_table_end() instead of build_header()")
Signed-off-by: Miguel Luis <miguel.luis@oracle.com>
Message-Id: <20220920162137.75239-3-miguel.luis@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Ani Sinha <ani@anisinha.ca>
Make vhost-user-blk backwards compatible when migrating from older VMs
running with modern features turned off, the same way it was done for
virtio-blk in 20764be042 ("virtio-blk: set config size depending on the features enabled")
It's currently impossible to migrate from an older VM with
vhost-user-blk (with disable-legacy=off) because of errors like this:
qemu-system-x86_64: get_pci_config_device: Bad config data: i=0x10 read: 41 device: 1 cmask: ff wmask: 80 w1cmask:0
qemu-system-x86_64: Failed to load PCIDevice:config
qemu-system-x86_64: Failed to load virtio-blk:virtio
qemu-system-x86_64: error while loading state for instance 0x0 of device '0000:00:05.0:00.0:02.0/virtio-blk'
qemu-system-x86_64: load of migration failed: Invalid argument
This is caused by the newer (destination) VM requiring a bigger BAR0
alignment because it has to cover a bigger configuration space, which
isn't actually needed since those additional config fields are not
active (write-zeroes/discard).
Signed-off-by: Daniil Tatianin <d-tatianin@yandex-team.ru>
Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
Message-Id: <20220906073111.353245-6-d-tatianin@yandex-team.ru>
Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
No reason to have this be a separate field. This also makes it more akin
to what the virtio-blk device does.
Signed-off-by: Daniil Tatianin <d-tatianin@yandex-team.ru>
Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
Message-Id: <20220906073111.353245-5-d-tatianin@yandex-team.ru>
Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
It is useful to have the ability to disable these features for
compatibility with older VMs that don't have these implemented.
Signed-off-by: Daniil Tatianin <d-tatianin@yandex-team.ru>
Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
Message-Id: <20220906073111.353245-4-d-tatianin@yandex-team.ru>
Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This way we can reuse it for other virtio-blk devices, e.g
vhost-user-blk, which currently does not control its config space size
dynamically.
Signed-off-by: Daniil Tatianin <d-tatianin@yandex-team.ru>
Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
Message-Id: <20220906073111.353245-3-d-tatianin@yandex-team.ru>
Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This is the first step towards moving all device config size calculation
logic into the virtio core code. In particular, this adds a struct that
contains all the necessary information for common virtio code to be able
to calculate the final config size for a device. This is expected to be
used with the new virtio_get_config_size helper, which calculates the
final length based on the provided host features.
This builds on top of already existing code like VirtIOFeature and
virtio_feature_get_config_size(), but adds additional fields, as well as
sanity checking so that device-specifc code doesn't have to duplicate it.
An example usage would be:
static const VirtIOFeature dev_features[] = {
{.flags = 1ULL << FEATURE_1_BIT,
.end = endof(struct virtio_dev_config, feature_1)},
{.flags = 1ULL << FEATURE_2_BIT,
.end = endof(struct virtio_dev_config, feature_2)},
{}
};
static const VirtIOConfigSizeParams dev_cfg_size_params = {
.min_size = DEV_BASE_CONFIG_SIZE,
.max_size = sizeof(struct virtio_dev_config),
.feature_sizes = dev_features
};
// code inside my_dev_device_realize()
size_t config_size = virtio_get_config_size(&dev_cfg_size_params,
host_features);
virtio_init(vdev, VIRTIO_ID_MYDEV, config_size);
Currently every device is expected to write its own boilerplate from the
example above in device_realize(), however, the next step of this
transition is moving VirtIOConfigSizeParams into VirtioDeviceClass,
so that it can be done automatically by the virtio initialization code.
All of the users of virtio_feature_get_config_size have been converted
to use virtio_get_config_size so it's no longer needed and is removed
with this commit.
Signed-off-by: Daniil Tatianin <d-tatianin@yandex-team.ru>
Message-Id: <20220906073111.353245-2-d-tatianin@yandex-team.ru>
Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This allows is to instantiate a vhost-user-gpio device as part of a PCI
bus. It is mostly boilerplate which looks pretty similar to the
vhost-user-fs-pci device.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <5f560cab92d0d789b1c94295ec74b9952907d69d.1641987128.git.viresh.kumar@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220802095010.3330793-14-alex.bennee@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This creates the QEMU side of the vhost-user-gpio device which connects
to the remote daemon. It is based of vhost-user-i2c code.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <5390324a748194a21bc99b1538e19761a8c64092.1641987128.git.viresh.kumar@linaro.org>
[AJB: fixes for qtest, tweaks to feature bits]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Cc: Vincent Whitchurch <vincent.whitchurch@axis.com>
Message-Id: <20220802095010.3330793-13-alex.bennee@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The `started` field is manipulated internally within the vhost code
except for one place, vhost-user-blk via f5b22d06fb (vhost: recheck
dev state in the vhost_migration_log routine). Mark that as a FIXME
because it introduces a potential race. I think the referenced fix
should be tracking its state locally.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220802095010.3330793-12-alex.bennee@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Raphael Norwitz <raphael.norwittz@nutanix.com>
All the boilerplate virtio code does the same thing (or should at
least) of checking to see if the VM is running before attempting to
start VirtIO. Push the logic up to the common function to avoid
getting a copy and paste wrong.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220802095010.3330793-11-alex.bennee@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
These are useful for tracing the lifetime of vhost-user connections.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220802095010.3330793-10-alex.bennee@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
If the guest driver attempts to use the UNUSED(30) bit it is
potentially buggy as 6.3 Legacy Interface: Reserved Feature Bits
states it "SHOULD NOT be negotiated". For now just log this guest
error.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20220802095010.3330793-9-alex.bennee@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20220802095010.3330793-8-alex.bennee@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
There are some extra bits used over a vhost-user connection which are
hidden from the device itself. We need to set them here to ensure we
enable things like the protocol extensions.
Currently net/vhost-user.c has it's own inscrutable way of persisting
this data but it really should live in the core vhost_user code.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220726192150.2435175-7-alex.bennee@linaro.org>
Message-Id: <20220802095010.3330793-2-alex.bennee@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Callers of coroutine_fn must be coroutine_fn themselves, or the call
must be within "if (qemu_in_coroutine())". Apply coroutine_fn to
functions where this holds.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Acked-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Alberto Faria <afaria@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220922084924.201610-25-pbonzini@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
