Looks better when reviewing these source files.
Signed-off-by: Dong Xu Wang <wdongxu@linux.vnet.ibm.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Since common file operation functions lack of error detection,
so change them to bdrv series functions.
Signed-off-by: Li Zhi Hui <zhihuili@linux.vnet.ibm.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This patch is only to refactor some lines of codes to get better and more robust codes.
As you have seen, in qed_read_table_cb() it's nice to
use qiov->size because that function doesn't obviously use a single
struct iovec.
In other two functions, if qiov use more than one struct iovec, the existing way will get wrong nb_sectors.
To make the code more robust, it will be nicer to refactor the existing way as below.
Signed-off-by: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com>
Acked-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
A BlockDriverState should not issue requests on itself through the
public block layer interface. Nested, or reentrant, requests are
problematic because they do I/O throttling and request tracking twice.
Features like block layer copy-on-read use request tracking to avoid
race conditions between concurrent requests. The reentrant request will
have to "wait" for its parent request to complete. But the parent is
waiting for the reentrant request to make progress so we have reached
deadlock.
The solution is for block drivers to avoid the public block layer
interfaces for reentrant requests. Instead they should call their own
internal functions if they wish to perform reentrant requests.
This is also a good opportunity to make copy_sectors() a true
coroutine_fn. That means calling bdrv_co_writev() instead of
bdrv_write(). Behavior is unchanged but we're being explicit that this
executes in coroutine context.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Unlocking during COW allows for more parallelism. One change it requires is
that buffers are dynamically allocated instead of just using a per-image
buffer.
While touching the code, drop the synchronous qcow2_read() function and replace
it by a bdrv_read() call.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Cc: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Dong Xu Wang <wdongxu@linux.vnet.ibm.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
vvfat caches more or less everything when in writable mode. For migration
to work, it would have to be invalidated. Block migration for now when
in writable mode (default is readonly).
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
vdi caches the block map. For migration to work, it would have to be
invalidated. Block migration for now.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
s->lock should be unlocked before leaving add_aio_request.
Signed-off-by: Dong Xu Wang <wdongxu@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
zlib.h is not a local include file, therefore it should be included
using <> instead of "".
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Now when you try to migrate with qed, you get:
(qemu) migrate tcp:localhost:1025
Block format 'qed' used by device 'ide0-hd0' does not support feature 'live migration'
(qemu)
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
We don't reopen the actual file, but instead invoke the close and open routines.
We specifically ignore the backing file since it's contents are read-only and
therefore immutable.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
qcow2 has a writeback metadata cache, so flushing a qcow2 image actually
consists of writing back that cache to the protocol and only then flushes the
protocol in order to get everything stable on disk.
This introduces a separate bdrv_co_flush_to_os to reflect the split.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
There are two different types of flush that you can do: Flushing one level up
to the OS (i.e. writing data to the host page cache) or flushing it all the way
down to the disk. The existing functions flush to the disk, reflect this in the
function name.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The Data Offset field in the Dynamic Disk Header is an 8 byte field.
Although the specification (2006-10-11) gives an example of initializing
only the first 4 bytes, images generated by Microsoft on Windows initialize
all 8 bytes.
Failure to initialize all 8 bytes results in errors from utilities
like Citrix's vhd-util which checks specifically for the proper Data
Offset field initialization.
Signed-off-by: Charles Arnold <carnold@suse.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
vvfat used to directly call into the qcow2 block driver instead of using the
block.c wrappers. With the coroutine conversion, this stopped working.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
First determine FAT12/16/32, then compute geometry from that for both
FDD and HDD. For 1.44MB floppies, and 2.88MB floppies using FAT16,
change to 1 sector/cluster. The default remains 2.88MB with FAT12
and 2 sectors/cluster. Both DOS and mkdosfs by default format a 2.88MB
floppy as FAT12.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The sector count is stored in the partition and hence must not include the
sectors before its start. At the same time, remove the useless special
casing for 1.44 MB floppies. This fixes fsck on VVFAT hard disks,
which otherwise tries to seek past the end of the disk.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This is consistent with what "real" floppies have, so file(1)
now actually recognizes the VVFAT image as a 1.44 MB floppy.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
If the number of "faked sectors" + the number of sectors that are
part of a cluster does not sum up to the total number of sectors,
qemu-img convert fails. Read these spare sectors as all zeros.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
When reading the address of the first free entry, you cannot
use array_get without first marking all entries as occupied.
This is visible if you change the sectors per cluster on a
floppy from 2 to 1.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Fix mismatching allocation and deallocation: g_free should be used to pair with
g_malloc.
Reviewed-by: Andreas Färber <afaerber@suse.de>
Reviewed_by: Ray Wang <raywang@linux.vnet.ibm.com>
Signed-off-by: Dong Xu Wang <wdongxu@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Fix coding style in block/cloop.c.
Reviewed-by: Andreas Färber <afaerber@suse.de>
Reviewed_by: Ray Wang <raywang@linux.vnet.ibm.com>
Signed-off-by: Dong Xu Wang <wdongxu@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
If qcow2_cache_flush failed, s->lock will not be unlock.
Signed-off-by: Dong Xu Wang <wdongxu@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Data we read from the disk isn't necessarily null terminated and may not
contain the string we're looking for. The code needs to be a bit more careful
here.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
An entry in the VDI block map will hold an offset to the actual block if
the block is allocated, or one of two specially-interpreted values if
not allocated. Using VirtualBox terminology, value VDI_IMAGE_BLOCK_FREE
(0xffffffff) represents a never-allocated block (semantically arbitrary
content). VDI_IMAGE_BLOCK_ZERO (0xfffffffe) represents a "discarded"
block (semantically zero-filled). block/vdi knows only about
VDI_IMAGE_BLOCK_FREE. Teach it about VDI_IMAGE_BLOCK_ZERO.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This provides built-in support for iSCSI to QEMU.
This has the advantage that the iSCSI devices need not be made visible to the host, which is useful if you have very many virtual machines and very many iscsi devices.
It also has the benefit that non-root users of QEMU can access iSCSI devices across the network without requiring root privilege on the host.
This driver interfaces with the multiplatform posix library for iscsi initiator/client access to iscsi devices hosted at
git://github.com/sahlberg/libiscsi.git
The patch adds the driver to interface with the iscsi library.
It also updated the configure script to
* by default, probe is libiscsi is available and if so, build
qemu against libiscsi.
* --enable-libiscsi
Force a build against libiscsi. If libiscsi is not available
the build will fail.
* --disable-libiscsi
Do not link against libiscsi, even if it is available.
When linked with libiscsi, qemu gains support to access iscsi resources such as disks and cdrom directly, without having to make the devices visible to the host.
You can specify devices using a iscsi url of the form :
iscsi://[<username>[:<password>@]]<host>[:<port]/<target-iqn-name>/<lun>
When using authentication, the password can optionally be set with
LIBISCSI_CHAP_PASSWORD="password" to avoid it showing up in the process list
Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
'ret' is unconditionally overwitten by qed_read_l1_table_sync()
Spotted by Clang Analyzer
Signed-off-by: Pavel Borzenkov <pavel.borzenkov@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Spotted by Clang Analyzer
[Note this memcpy call has always been safe because the length will be 0
when the pointer is NULL]
Signed-off-by: Pavel Borzenkov <pavel.borzenkov@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Since coroutine operation is now mandatory, convert both bdrv_discard
implementations to coroutines. For qcow2, this means taking the lock
around the operation. raw-posix remains synchronous.
The bdrv_discard callback is then unused and can be eliminated.
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Since coroutine operation is now mandatory, convert all bdrv_flush
implementations to coroutines. For qcow2, this means taking the lock.
Other implementations are simpler and just forward bdrv_flush to the
underlying protocol, so they can avoid the lock.
The bdrv_flush callback is then unused and can be eliminated.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This does the first part of the conversion to coroutines, by
wrapping bdrv_write implementations to take the mutex.
Drivers that implement bdrv_write rather than bdrv_co_writev can
then benefit from asynchronous operation (at least if the underlying
protocol supports it, which is not the case for raw-win32), even
though they still operate with a bounce buffer.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This does the first part of the conversion to coroutines, by
wrapping bdrv_read implementations to take the mutex.
Drivers that implement bdrv_read rather than bdrv_co_readv can
then benefit from asynchronous operation (at least if the underlying
protocol supports it, which is not the case for raw-win32), even
though they still operate with a bounce buffer.
raw-win32 does not need the lock, because it cannot yield.
nbd also doesn't probably, but better be safe.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The big conversion of bdrv_read/write to coroutines caused the two
homonymous callbacks in BlockDriver to become reentrant. It goes
like this:
1) bdrv_read is now called in a coroutine, and calls bdrv_read or
bdrv_pread.
2) the nested bdrv_read goes through the fast path in bdrv_rw_co_entry;
3) in the common case when the protocol is file, bdrv_co_do_readv calls
bdrv_co_readv_em (and from here goes to bdrv_co_io_em), which yields
until the AIO operation is complete;
4) if bdrv_read had been called from a bottom half, the main loop
is free to iterate again: a device model or another bottom half
can then come and call bdrv_read again.
This applies to all four of read/write/flush/discard. It would also
apply to is_allocated, but it is not used from within coroutines:
besides qemu-img.c and qemu-io.c, which operate synchronously, the
only user is the monitor. Copy-on-read will introduce a use in the
block layer, and will require converting it.
The solution is "simply" to convert all drivers to coroutines! We
just need to add a CoMutex that is taken around affected operations.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Move vmdk_parent_open to vmdk_open. There's another path how
vmdk_parent_open can be reached:
vmdk_parse_extents() -> vmdk_open_sparse() -> vmdk_open_vmdk4() ->
vmdk_open_desc_file().
If that can happen, however, the code is bogus. vmdk_parent_open
reads from bs->file:
if (bdrv_pread(bs->file, s->desc_offset, desc, DESC_SIZE) != DESC_SIZE) {
but it is always called with s->desc_offset == 0 and with the same
bs->file. So the data that vmdk_parent_open reads comes always from the
same place, and anyway there is only one place where it can write it,
namely bs->backing_file.
So, if it cannot happen, the patched code is okay.
It is also possible that the recursive call can happen, but only once. In
that case there would still be a bug in vmdk_open_desc_file setting
s->desc_offset = 0, but the patched code is okay.
Finally, in the case where multiple recursive calls can happen the code
would need to be rewritten anyway. It is likely that this would anyway
involve adding several parameters to vmdk_parent_open, and calling it from
vmdk_open_vmdk4.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
While vmdk_open_desc_file (touched by the patch) correctly changed -1
to -EINVAL, vmdk_open did not. Fix it directly in vmdk_parent_open.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
If during allocation of compressed clusters the cluster was already allocated
uncompressed, fail and properly release the l2_table (the latter avoids a
failed assertion).
While at it, make it return some real error numbers instead of -1.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Dong Xu Wang <wdongxu@linux.vnet.ibm.com>
This similarly adds support for coroutine and asynchronous discard.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Block drivers now only need to provide either of .bdrv_co_flush,
.bdrv_aio_flush() or for legacy drivers .bdrv_flush(). Remove
the redundant .bdrv_flush() implementations.
[Paolo Bonzini: change raw driver to bdrv_co_flush]
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This makes the following patch easier to review.
Cc: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The raw format delegates all operations to bs->file (the protocol).
Previously this block driver exposed both sync and aio interfaces.
Since the block layer now works in terms of coroutines, expose the
coroutine interfaces and drop the others. This avoids unnecessary
emulation of sync and aio interfaces.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Block drivers only need to provide one of sync, aio, or coroutine
interfaces. Since raw-posix.c provides aio interfaces, simply drop the
synchronous interfaces since they can be emulated using aio and
coroutines.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
cppcheck reported this error:
qemu/block/qcow.c:599: error: Mismatching allocation and deallocation: cluster_data
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Dong Xu Wang <wdongxu@linux.vnet.ibm.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
The unused code was detected using cppcheck.
Cc: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
cppcheck reported memory leaks and mismatched g_malloc() with free()
instead of g_free().
Fix these errors.
Cc: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Allow to resize images that reside on host devices up to the available
space. This allows to grow images after resizing the device manually or
vice versa.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
QED's metadata caching strategy allows two parallel requests to race for
metadata lookup. The first one to complete will populate the metadata
cache and the second one will drop the data it just read in favor of the
cached data.
There is a use-after-free in qed_read_l2_table_cb() and
qed_commit_l2_update() where l2_table->offset was used after the
l2_table may have been freed due to a metadata lookup race. Fix this by
keeping the l2_offset in a local variable and not reaching into the
possibly freed l2_table.
Reported-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The previous behaviour was to finish AIOCBs inside curl_aio_readv()
if the data was cached. This caused the following failed assertion
at hw/ide/pci.c:314: bmdma_cmd_writeb
"Assertion `bm->bus->dma->aiocb == ((void *)0)' failed."
By scheduling a QEMUBH and performing the completion inside the
callback, we avoid this problem.
Signed-off-by: Nick Thomas <nick@bytemark.co.uk>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The config string is variously delimited by =, @, and /, depending on the
field. Allow these characters to be escaped by preceeding them with \.
Signed-off-by: Sage Weil <sage@newdream.net>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
librbd recently added async writeback and flush support. If the new
rbd_flush() call is available, call it.
Signed-off-by: Sage Weil <sage@newdream.net>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Properly document the configuration string syntax and semantics. Remove
(out of date) details about the librbd implementation.
Signed-off-by: Sage Weil <sage@newdream.net>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
If we are reading from the default config location, ignore any failures.
It is perfectly legal for the user to specify exactly the options they need
and to not rely on any config file.
Signed-off-by: Sage Weil <sage@newdream.net>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Release extent_file on error in vmdk_parse_extents. Added closing files
in freeing extents.
Signed-off-by: Fam Zheng <famcool@gmail.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
nbd supports writing flags in bytes 24...27 of the header,
and uses that for the read-only flag. Add support for it
in qemu-nbd.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Those blanks violate the coding conventions, see
scripts/checkpatch.pl.
Blanks missing after colons in the changed lines were added.
This patch does not try to fix tabs, long lines and other
problems in the changed lines, therefore checkpatch.pl reports
many violations.
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
QCowL2Meta::offset is not cluster aligned but only sector aligned
however nb_clusters count cluster from cluster start.
This fix range check. Note that old code have no corruption issues
related to this check cause it only cause intersection to occur
when shouldn't.
Signed-off-by: Frediano Ziglio <freddy77@gmail.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
QCow2Meta structure was inserted into list before many fields are
initialized. Currently is not a problem cause all occur in a lock
but if qcow2_alloc_clusters would in a future unlock this lock
some issues could arise.
Initializing fields before inserting fix the problem.
Signed-off-by: Frediano Ziglio <freddy77@gmail.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Fix leak of s->snap in failure path. Simplify error paths for the whole
function.
Reported-by: Stefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: Sage Weil <sage@newdream.net>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
No assignment in condition. Remove duplicate ret > 0 check.
Signed-off-by: Sage Weil <sage@newdream.net>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Allow the client id to be specified in the config string via 'id=' so that
users can control who they authenticate as. Currently they are stuck with
the default ('admin'). This is necessary for anyone using authentication
in their environment.
Signed-off-by: Sage Weil <sage@newdream.net>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The vSphere 4 exported image is streamOptimized extent, which is not
quite correctly handled. Ignore rdgOffset when RGD flag bit not set.
Signed-off-by: Fam Zheng <famcool@gmail.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Haiku provides a specially formed vmdk image, which let qemu abort. It a
combination of sparse header and flat data (i.e. with not l1/l2 table at
all). The fix is turn to descriptor when sparse header is zero in field
'capacity'.
Signed-off-by: Fam Zheng <famcool@gmail.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Creating streamOptimized subformat. Added subformat option
'streamOptimized', to create a image with compression enabled and each
cluster with a GrainMarker.
Signed-off-by: Fam Zheng <famcool@gmail.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add support for reading/writing compressed extent.
Signed-off-by: Fam Zheng <famcool@gmail.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Added flags field for compressed/streamOptimized extents, open and save
image configuration.
Signed-off-by: Fam Zheng <famcool@gmail.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Factor out read/write extent code, since there will be more things to
take care of once reading/writing compressed clusters is introduced.
Signed-off-by: Fam Zheng <famcool@gmail.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Enable the createType 'twoGbMaxExtentFlat'. The supporting code is
already in.
Signed-off-by: Fam Zheng <famcool@gmail.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Block driver "raw" forwards most methods to the underlying block
driver. However, it doesn't implement method bdrv_media_changed().
Makes bdrv_media_changed() always return -ENOTSUP.
I believe -fda /dev/fd0 gives you raw over host_floppy, and disk
change detection (fdc register 7 bit 7) is broken. Testing my theory
requires a computer museum, though.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Requests depending on a failed request would end up waiting forever. This fixes
the error path to continue dependent requests even when the request has failed.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add some notes about Linux AIO explaining why we don't use AIO in
some situations.
Signed-off-by: Frediano Ziglio <freddy77@gmail.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Most changes were made using these commands:
git grep -la '__attribute__((packed))'|xargs perl -pi -e 's/__attribute__\(\(packed\)\)/QEMU_PACKED/'
git grep -la '__attribute__ ((packed))'|xargs perl -pi -e 's/__attribute__ \(\(packed\)\)/QEMU_PACKED/'
git grep -la '__attribute__((__packed__))'|xargs perl -pi -e 's/__attribute__\(\(__packed__\)\)/QEMU_PACKED/'
git grep -la '__attribute__ ((__packed__))'|xargs perl -pi -e 's/__attribute__ \(\(__packed__\)\)/QEMU_PACKED/'
git grep -la '__attribute((packed))'|xargs perl -pi -e 's/__attribute\(\(packed\)\)/QEMU_PACKED/'
Whitespace in linux-user/syscall_defs.h was fixed manually
to avoid warnings from scripts/checkpatch.pl.
Manual changes were also applied to hw/pc.c.
I did not fix indentation with tabs in block/vvfat.c.
The patch will show 4 errors with scripts/checkpatch.pl.
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
This makes the sheepdog block driver support bdrv_co_readv/writev
instead of bdrv_aio_readv/writev.
With this patch, Sheepdog network I/O becomes fully asynchronous. The
block driver yields back when send/recv returns EAGAIN, and is resumed
when the sheepdog network connection is ready for the operation.
Signed-off-by: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Embed qcow_aio_read_cb into qcow_co_readv and qcow_aio_write_cb into qcow_co_writev
Signed-off-by: Frediano Ziglio <freddy77@gmail.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
remove unused field from this structure and put some of them in qcow_aio_read_cb and qcow_aio_write_cb
Signed-off-by: Frediano Ziglio <freddy77@gmail.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Current behaviour if a read fails is for the acb to not get finished.
This causes an infinite loop in bdrv_read_em (block.c). The read failure
never gets reported to the guest and if the error condition clears, the
process never recovers.
With this patch, when curl reports a failure we finish the acb as a
failure. This results in the guest receiving an I/O error (rather than
the read hanging indefinitely) and if the error condition subsequently
clears, retries work as expected.
The simplest test is to put an ISO on a web server you have control over
and open it with qemu-io. Then move the ISO out of the way and attempt
to read some data - you should see behaviour matching the above.
Signed-off-by: Nick Thomas <nick@bytemark.co.uk>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
commit 52b8eb6013 added a mutex,
but never initialized it. This caused a segfault.
Reported-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Documentation states the num is measured in clusters, but its
actually measured in sectors
Signed-off-by: Devin Nakamura <devin122@gmail.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
By introducing BlockDriverState compiling qcow2 with DEBUG_ALLOC and DEBUG_EXT
defined got broken.
Define a BdrvCheckResult structure locally which is now needed as the second
argument.
Also fix qcow2_read_extensions() needing BDRVQcowState.
Signed-off-by: Philipp Hahn <hahn@univention.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
SetFilePointer returns INVALID_SET_FILE_POINTER when it fails.
In addition, GetLastError must be checked.
The first call of SetFilePointer did not use INVALID_SET_FILE_POINTER,
the second call used wrong error handling.
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
When loading an internal snapshot whose L1 table is smaller than the current L1
table, the size of the current L1 would be shrunk to the snapshot's L1 size in
memory, but not on disk. This lead to incorrect refcount updates and eventuelly
to image corruption.
Instead of writing the new L1 size to disk, this simply retains the bigger L1
size that is currently in use and makes sure that the unused part is zeroed.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Tested-by: Philipp Hahn <hahn@univention.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The purpose of AsyncContexts was to protect qcow and qcow2 against reentrancy
during an emulated bdrv_read/write (which includes a qemu_aio_wait() call and
can run AIO callbacks of different requests if it weren't for AsyncContexts).
Now both qcow and qcow2 are protected by CoMutexes and AsyncContexts can be
removed.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The old qcow format is another user of the AsyncContext infrastructure.
Converting it to coroutines (and therefore CoMutexes) allows to remove
AsyncContexts.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
VHD files technically can be up to 2Tb, but virtual pc is limited
to 127G. Currently qemu-img refused to create vpc files > 127G,
but it is failing to return error when converting from a non-vpc
VHD file which is >127G. It returns success, but creates a truncated
converted image. Also, qemu-img info claims the vpc file is 127G
(and clean).
This patch detects a too-large vpc file and returns -EFBIG. Without
this patch,
=============================================================
root@ip-10-38-123-242:~/qemu-fixed# qemu-img info /mnt/140g-dynamic.vhd
image: /mnt/140g-dynamic.vhd
file format: vpc
virtual size: 127G (136899993600 bytes)
disk size: 284K
root@ip-10-38-123-242:~/qemu-fixed# qemu-img convert -f vpc -O raw /mnt/140g-dynamic.vhd /mnt/y
root@ip-10-38-123-242:~/qemu-fixed# echo $?
0
root@ip-10-38-123-242:~/qemu-fixed# qemu-img info /mnt/y
image: /mnt/y
file format: raw
virtual size: 127G (136899993600 bytes)
disk size: 0
=============================================================
(The 140G image was truncated with no warning or error.)
With the patch, I get:
=============================================================
root@ip-10-38-123-242:~/qemu-fixed# ./qemu-img info /mnt/140g-dynamic.vhd
qemu-img: Could not open '/mnt/140g-dynamic.vhd': File too large
root@ip-10-38-123-242:~/qemu-fixed# ./qemu-img convert -f vpc -O raw /mnt/140g-dynamic.vhd /mnt/y
qemu-img: Could not open '/mnt/140g-dynamic.vhd': File too large
qemu-img: Could not open '/mnt/140g-dynamic.vhd'
=============================================================
See https://bugs.launchpad.net/qemu/+bug/814222 for details.
Signed-off-by: Serge Hallyn <serge.hallyn@canonical.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Callees always return 0, except for FreeBSD's cdrom_eject(), which
returns -ENOTSUP when the device is in a terminally wedged state.
The only caller is bdrv_eject(), and it maps -ENOTSUP to 0 since
commit 4be9762a.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The only caller is bdrv_set_locked(), and it ignores the value.
Callees always return 0, except for FreeBSD's cdrom_set_locked(),
which returns -ENOTSUP when the device is in a terminally wedged
state.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
It's been disabled since the start (commit 19cb3738, Aug 2006), and
has been untouched except for spelling fixes and such. I don't feel
like dragging it along any further.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Avoid warnings like these by wrapping recv():
CC slirp/ip_icmp.o
/src/qemu/slirp/ip_icmp.c: In function 'icmp_receive':
/src/qemu/slirp/ip_icmp.c:418:5: error: passing argument 2 of 'recv' from incompatible pointer type [-Werror]
/usr/local/lib/gcc/i686-mingw32msvc/4.6.0/../../../../i686-mingw32msvc/include/winsock2.h:547:32: note: expected 'char *' but argument is of type 'struct icmp *'
Remove also casts used to avoid warnings.
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
In snapshotting there is no guest involved, so we can safely use a writeback
mode and do the flushes in the right place (i.e. at the very end). This
improves the time that creating/restoring an internal snapshot takes with an
image in writethrough mode.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
qemu-img.c wants to count allocated file size of image. Previously it
counts a single bs->file by 'stat' or Window API. As VMDK introduces
multiple file support, the operation becomes format specific with
platform specific meanwhile.
The functions are moved to block/raw-{posix,win32}.c and qemu-img.c calls
bdrv_get_allocated_file_size to count the bs. And also added VMDK code
to count his own extents.
Signed-off-by: Fam Zheng <famcool@gmail.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Conform coding style in vmdk.c to pass scripts/checkpatch.pl checks.
Signed-off-by: Fam Zheng <famcool@gmail.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add create option 'format', with enums:
monolithicSparse
monolithicFlat
twoGbMaxExtentSparse
twoGbMaxExtentFlat
Each creates a subformat image file. The default is monolithicSparse.
Signed-off-by: Fam Zheng <famcool@gmail.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Parse vmdk decriptor file and open mono flat image.
Read/write the flat extent.
Signed-off-by: Fam Zheng <famcool@gmail.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The return type of get_cluster_offset was an offset that use 0 to denote
'not allocated', this will be no longer true for flat extents, as we see
flat extent file as a single huge cluster whose offset is 0 and length
is the whole file length.
So now we use int return value, 0 means success and otherwise offset
invalid.
Signed-off-by: Fam Zheng <famcool@gmail.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Cid_update is the flag for updating CID on first write after opening the
image. This should be per image open rather than per program life cycle,
so change it from static var of vmdk_write to a field in BDRVVmdkState.
Signed-off-by: Fam Zheng <famcool@gmail.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Flush all the file that referenced by the image.
Signed-off-by: Fam Zheng <famcool@gmail.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
There are several occurrence of magic number 0x200 as the descriptor
offset within mono sparse image file. This is not the case for images
with separate descriptor file. So a field is added to BDRVVmdkState to
hold the correct value.
Signed-off-by: Fam Zheng <famcool@gmail.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Separate vmdk_open by subformats to:
* vmdk_open_vmdk3
* vmdk_open_vmdk4
Signed-off-by: Fam Zheng <famcool@gmail.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Probe as the same behavior as VMware does.
Recognize image as monolithicFlat descriptor file when the file is text
and the first effective line (not '#' leaded comment or space line) is
either 'version=1' or 'version=2'. No space or upper case charactors
accepted.
Signed-off-by: Fam Zheng <famcool@gmail.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
In get_whole_cluster, the offset is not aligned to cluster when reading
from backing_hd. When the first write to child is not at the cluster
boundary, wrong address data from parent is copied to child.
Signed-off-by: Fam Zheng <famcool@gmail.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This introduces qemu-img create option for sheepdog which allows the
data to be fully preallocated (note that sheepdog always preallocates
metadata).
The option is disabled by default and you need to enable it like the
following:
qemu-img create sheepdog:test -o preallocation=full 1G
Signed-off-by: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp>
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
On Linux x86_64 host with 32bit userspace, running
qemu or even just "qemu-img create -f qcow2 some.img 1G"
causes a kernel warning:
ioctl32(qemu-img:5296): Unknown cmd fd(3) cmd(00005326){t:'S';sz:0} arg(7fffffff) on some.img
ioctl32(qemu-img:5296): Unknown cmd fd(3) cmd(801c0204){t:02;sz:28} arg(fff77350) on some.img
ioctl 00005326 is CDROM_DRIVE_STATUS,
ioctl 801c0204 is FDGETPRM.
The warning appears because the Linux compat-ioctl handler for these
ioctls only applies to block devices, while qemu also uses the ioctls on
plain files. Work around by calling fstat() the ensure the ioctls are
only used on block devices.
Signed-off-by: Johannes Stezenbach <js@sig21.net>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
error_report() prepends location, and appends a newline. The message
constructed from the arguments should not contain a newline. Fix the
obvious offenders.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
If qcow2_cache_put returns an error during cluster allocation and the
allocation fails, it must be removed from the list of in-flight allocations.
Otherwise we'd get a loop in the list when the ACB is used for the next
allocation.
Luckily, this qcow2_cache_put shouldn't fail anyway because the L2 table is
only read, so that qcow2_cache_put doesn't even involve I/O.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
bdrv_aio_* must not call the callback before returning to its caller. In vdi,
this could happen in some error cases. This starts the real requests processing
in a BH to avoid this situation.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
bdrv_aio_* must not call the callback before returning to its caller. In qcow,
this could happen in some error cases. This starts the real requests processing
in a BH to avoid this situation.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
bdrv_aio_* must not call the callback before returning to its caller. In qcow2,
this could happen in some error cases. This starts the real requests processing
in a BH to avoid this situation.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
