OpenCores 10/100 Mbps Ethernet MAC specification doesn't clearly state
whether FCS is counted in the RX frame length or not. Looks like it is.
Append zero FCS to the received frames.
Get rid of big static buffer for RX frame padding, optimize it for the
most common MINFL value range.
Set RXD_TL for the long frames only when HUGEN bit is set.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This patch increases robustness when migrating to a file with
two little changes:
(1) Before closing the migration file handle checks if it happens to be
a regular file and if so it issues a fsync. This way the data is
flushed to disk before qemu sends the migration completed event.
(2) It adds error checking. In case either fsync or close syscall
fails pass up the error (and fail migration).
[ v2: return -errno instead of -1 ]
Cc: Juan Quintela <quintela@redhat.com>
Cc: Jiri Denemark <jdenemar@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
There is a "test-coroutine" which isn't in the list.
Add it so "make check" runs it too.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Add some Makefile glue so we have a simple "make check"
to run the unit tests.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Create a new CHECKS variable. Put the checks there instead
of adding them to the TOOLS variable.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Probe for libcheck and build checks (if found) by default.
Can be explicitly disabled using --disable-check-utests.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Undefine ABS to avoid a clash with the macro that glib.h
helpfully defines for us (and a resulting build failure
on ia64 hosts).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
A simple migration reproduces it:
1. Start the source VM with:
# qemu [...] -S
2. Start the destination VM with:
# qemu <source VM cmd-line> -incoming tcp:0:4444
3. In the source VM:
(qemu) migrate -d tcp:0:4444
4. The source VM will segfault as soon as migration completes (might not
happen in the first try)
What is happening here is that qemu_file_put_notify() can end up closing
's->file' (in which case it's also set to NULL). The call stack is rather
complex, but Eduardo helped tracking it to:
select loop -> migrate_fd_put_notify() -> qemu_file_put_notify() ->
buffered_put_buffer() -> migrate_fd_put_ready() ->
migrate_fd_completed() -> migrate_fd_cleanup().
To be honest, it's not completely clear to me in which cases 's->file'
is not closed (on error maybe)? But I doubt this fix will make anything
worse.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
.gitignore already lists the qapi-generated subdirectory which includes a
number of files generated during build. However, there are some additional
files generated by the qapi build which go in the top level directory.
This patch adds them to .gitignore, removing the irritating noise from
diffs and the like.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
qemu-barrier.h tests if macro __powerpc__ is defined, however, the
preprocessor on PowerPC Mac OS X defines only __POWERPC__, not
__powerpc__. Resolve by testing instead for qemu-provided _ARCH_PPC.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Pavel Borzenkov <pavel.borzenkov@gmail.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
After the removal of the non-threaded mode cpu_exec_all is now only used
by TCG. Refactor it accordingly, also dropping its unused return value.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Make cpu_single_env thread-local. This fixes a regression
in handling of multi-threaded programs in linux-user mode
(bug 823902).
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
[Peter Maydell: rename tls_cpu_single_env to cpu_single_env]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Drop the cpu_single_env definition as it is unused.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Add an abstraction layer for defining and using thread-local
variables. For the moment this is implemented only for Linux,
which means they can only be used in restricted circumstances.
The abstraction layer allows us to add POSIX and Win32 support
later.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Spotted via code review, we initialize offset to 0 to avoid a
compiler warning, but in the unlikely case that offset is
never set to something else, we should abort instead of return
a value that will almost certainly cause problems.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The whole usb_host_close() function is skipped in case the device is not
in attached state. This is wrong though, only then usb_device_detach()
must be skipped, all other cleanup (especially device reset and closing
the file handle) still needs to be done. There are code paths where
usb_host_close() is called with the device in detached state already.
This fixes usb-host devices not being released and returned to the host
after removing them with device_del.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Some USB drivers, for example USBASPI.SYS, will skip different type of
device which has same VID/PID. The following patch helps preventing
usb-msd being skipped by the driver.
Signed-off-by: Roy Tam <roytam@gmail.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Valgrind is a tool which can automatically detect many kinds of bugs.
Running QEMU on Valgrind with x86_64 hosts was not possible because
Valgrind aborts when memalign is called with an alignment larger than
1 MiB. QEMU normally uses 2 MiB on Linux x86_64.
Now the alignment is reduced to the page size when QEMU is running on
Valgrind.
v2:
Instead of using the macro RUNNING_ON_VALGRIND from valgrind.h,
the patch now uses a hack from libvirt which tests for the pre-loaded
vgpreload_*.so shared libraries. This avoids the need for valgrind.h.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Officially take on maintainership for PReP and upgrade to Odd Fixes.
Acked-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Andreas Färber <andreas.faerber@web.de>
Cc: Alexander Graf <agraf@suse.de>
Cc: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
A basic wildcard matching is supported in both the monitor command
"trace-event" and the events list file. That means you can enable/disable
the events having a common prefix in a batch. For example, virtio-blk trace
events could be enabled using:
trace-event virtio_blk_* on
Signed-off-by: Mark Wu <wudxw@linux.vnet.ibm.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
When attaching a new device we must send a wakeup request to the root
hub, otherwise the guest will not notice the new device in case the
usb hub is suspended.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
RHBZ 740547
If we migrate when the device is in vga state the guest
still believes the slots are created, and will cause operations
that reference the slots, causing a "panic: virtual address out of range"
on the first of them. Easy to see by migrating in vga mode with
a driver loaded, for instance windows cmd window in full screen mode,
and then exiting vga mode back to native mode will cause said panic.
Fixed by doing the slot recreation in post_load for vga mode as well.
Note that compat does not require any changes because it creates it's
only slot by a side effect of QXL_IO_SET_MODE.
Signed-off-by: Alon Levy <alevy@redhat.com>
The qxl renderer works only with a shared displaysurface. So better
make sure we actually have one and restore it when needed.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
spice uses negative stride value to signal the bitmap is upside down.
The qxl renderer (used for scl, vnc and screenshots) wants a positive
value because it is easier to work with. The positive value is then
stored in the very same variable, which has the drawback that the
upside-down test works only once. Fix by using two variables.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reproducer:
$ MALLOC_PERTURB_=234 qemu-system-x86_64 -vnc :0,acl,sasl [...]
QEMU 0.15.50 monitor - type 'help' for more information
(qemu) acl_add vnc.username fred allow
acl: added rule at position 1
(qemu) acl_reset vnc.username
Segmentation fault (core dumped)
Spotted by Coverity.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
C99 7.15.1: Each invocation of the va_start and va_copy macros shall
be matched by a corresponding invocation of the va_end macro in the
same function.
Spotted by Coverity. Harmless on the (common) systems where va_end()
does nothing.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
I'm getting:
could not configure /dev/net/tun (tap%d): Operation not permitted
When the ioctl() fails, ifr.ifr_name will most likely not be overwritten.
So we better only use it when ifname contains a string.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Unlike other tcg target code generators, this one does not generate
machine code for some cpu. It generates machine independent bytecode
which is interpreted later.
This allows running QEMU on any host.
Interpreted bytecode is slower than direct execution of generated
machine code.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
tcg_op_defs was already a global array.
The tci disassembler also needs ARRAY_SIZE(tcg_op_defs),
so add a new global constant with this value.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Targets may use a non standard definition of tcg_tb_exec
by defining this macro in their tcg_target.h.
This is used here by ppc. It will be used by the TCG interpreter, too.
Cc: malc <av1474@comtv.ru>
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Use QLIST_INSERT_HEAD_RCU and rcu_read_lock/unlock instead of rwlocks.
Use v9fs_synth_mutex as a write-only mutex to handle concurrent writers.
Signed-off-by: Harsh Prateek Bora <harsh@linux.vnet.ibm.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
SynthFS needs a QLIST_INSERT_HEAD_RCU to make sure list instructions are not
re-ordered and therefore avoiding a crash. There may be parallel readers which
should be allowed for lock-free access and this variant allows us to get rid
of rwlocks used by readers.
SynthFS is a special case where we dont really need full RCU capabilities as
it doesnt allow list entry deletion but concurrent readers/writers and
instruction re-ordering should not result in a crash.
Also, once the real rcu is available, dummy rcu macro definitions will go away
and the code will still work as expected.
This patchwork is based on inputs from Paolo Bonzini.
Signed-off-by: Harsh Prateek Bora <harsh@linux.vnet.ibm.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
This patch create a synthetic file system with mount tag
v_synth when -virtfs_synth command line option is specified
in qemu. The synthetic file system can be mounted in guest
using 9p using the below command line
mount -t 9p -oversion=9p2000.L,trans=virtio v_synth <mountpint>
Synthetic file system enabled different qemu subsystem to register
callbacks for read and write events from guest. The subsystem
can create directories and files in the synthetic file system as show
in ex below
qemu_v9fs_synth_mkdir(NULL, 0777, "test2", &node);
qemu_v9fs_synth_add_file(node, 0777, "testfile",
my_test_read, NULL, NULL);
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
To implement synthetic file system in Qemu we may not really
require file descriptor and Dir *. Make generic code use
V9fsFidOpenState instead.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
A new fsdev parameter "readonly" is introduced to control accessing 9p export.
"readonly" can be used to specify the access type. By default "rw" access
is given to 9p export.
Signed-off-by: M. Mohan Kumar <mohan@in.ibm.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
