Currently any client which can complete the TLS handshake is able to use
a chardev server. The server admin can turn on the 'verify-peer' option
for the x509 creds to require the client to provide a x509
certificate. This means the client will have to acquire a certificate
from the CA before they are permitted to use the chardev server. This is
still a fairly low bar.
This adds a 'tls-authz=OBJECT-ID' option to the socket chardev backend
which takes the ID of a previously added 'QAuthZ' object instance. This
will be used to validate the client's x509 distinguished name. Clients
failing the check will not be permitted to use the chardev server.
For example to setup authorization that only allows connection from a
client whose x509 certificate distinguished name contains 'CN=fred', you
would use:
$QEMU -object tls-creds-x509,id=tls0,dir=/home/berrange/qemutls,\
endpoint=server,verify-peer=yes \
-object authz-simple,id=authz0,identity=CN=laptop.example.com,,\
O=Example Org,,L=London,,ST=London,,C=GB \
-chardev socket,host=127.0.0.1,port=9000,server,\
tls-creds=tls0,tls-authz=authz0 \
...other qemu args...
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
This patch adds documentation of an -audiodev command line option, that
deprecates the old QEMU_* environment variables for audio backend
configuration. It's syntax is similar to existing options (-netdev,
-device, etc):
-audiodev driver_name,property=value,...
Although now it's possible to specify multiple -audiodev options on
command line, multiple audio backends are not supported yet.
Signed-off-by: Kővágó, Zoltán <DirtY.iCE.hu@gmail.com>
Message-id: ca5e761e58dcfaf591cf46080af3548551b42bb2.1552083282.git.DirtY.iCE.hu@gmail.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The VNC server has historically had support for ACLs to check both the
SASL username and the TLS x509 distinguished name. The VNC server was
responsible for creating the initial ACL, and the client app was then
responsible for populating it with rules using the HMP 'acl_add' command.
This is not satisfactory for a variety of reasons. There is no way to
populate the ACLs from the command line, users are forced to use the
HMP. With multiple network services all supporting TLS and ACLs now, it
is desirable to be able to define a single ACL that is referenced by all
services.
To address these limitations, two new options are added to the VNC
server CLI. The 'tls-authz' option takes the ID of a QAuthZ object to
use for checking TLS x509 distinguished names, and the 'sasl-authz'
option takes the ID of another object to use for checking SASL usernames.
In this example, we setup two authorization rules. The first allows any
client with a certificate issued by the 'RedHat' organization in the
'London' locality. The second ACL allows clients with either the
'joe@REDHAT.COM' or 'fred@REDHAT.COM' kerberos usernames. Both checks
must pass for the user to be allowed.
$QEMU -object tls-creds-x509,id=tls0,dir=/home/berrange/qemutls,\
endpoint=server,verify-peer=yes \
-object authz-simple,id=authz0,policy=deny,\
rules.0.match=O=RedHat,,L=London,rules.0.policy=allow \
-object authz-simple,id=authz1,policy=deny,\
rules.0.match=fred@REDHAT.COM,rules.0.policy=allow \
rules.0.match=joe@REDHAT.COM,rules.0.policy=allow \
-vnc 0.0.0.0:1,tls-creds=tls0,tls-authz=authz0,
sasl,sasl-authz=authz1 \
...other QEMU args...
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20190227145755.26556-2-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Add an authorization backend that talks to PAM to check whether the user
identity is allowed. This only uses the PAM account validation facility,
which is essentially just a check to see if the provided username is permitted
access. It doesn't use the authentication or session parts of PAM, since
that's dealt with by the relevant part of QEMU (eg VNC server).
Consider starting QEMU with a VNC server and telling it to use TLS with
x509 client certificates and configuring it to use an PAM to validate
the x509 distinguished name. In this example we're telling it to use PAM
for the QAuthZ impl with a service name of "qemu-vnc"
$ qemu-system-x86_64 \
-object tls-creds-x509,id=tls0,dir=/home/berrange/security/qemutls,\
endpoint=server,verify-peer=yes \
-object authz-pam,id=authz0,service=qemu-vnc \
-vnc :1,tls-creds=tls0,tls-authz=authz0
This requires an /etc/pam/qemu-vnc file to be created with the auth
rules. A very simple file based whitelist can be setup using
$ cat > /etc/pam/qemu-vnc <<EOF
account requisite pam_listfile.so item=user sense=allow file=/etc/qemu/vnc.allow
EOF
The /etc/qemu/vnc.allow file simply contains one username per line. Any
username not in the file is denied. The usernames in this example are
the x509 distinguished name from the client's x509 cert.
$ cat > /etc/qemu/vnc.allow <<EOF
CN=laptop.berrange.com,O=Berrange Home,L=London,ST=London,C=GB
EOF
More interesting would be to configure PAM to use an LDAP backend, so
that the QEMU authorization check data can be centralized instead of
requiring each compute host to have file maintained.
The main limitation with this PAM module is that the rules apply to all
QEMU instances on the host. Setting up different rules per VM, would
require creating a separate PAM service name & config file for every
guest. An alternative approach for the future might be to not pass in
the plain username to PAM, but instead combine the VM name or UUID with
the username. This requires further consideration though.
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Add a QAuthZListFile object type that implements the QAuthZ interface. This
built-in implementation is a proxy around the QAuthZList object type,
initializing it from an external file, and optionally, automatically
reloading it whenever it changes.
To create an instance of this object via the QMP monitor, the syntax
used would be:
{
"execute": "object-add",
"arguments": {
"qom-type": "authz-list-file",
"id": "authz0",
"props": {
"filename": "/etc/qemu/vnc.acl",
"refresh": true
}
}
}
If "refresh" is "yes", inotify is used to monitor the file,
automatically reloading changes. If an error occurs during reloading,
all authorizations will fail until the file is next successfully
loaded.
The /etc/qemu/vnc.acl file would contain a JSON representation of a
QAuthZList object
{
"rules": [
{ "match": "fred", "policy": "allow", "format": "exact" },
{ "match": "bob", "policy": "allow", "format": "exact" },
{ "match": "danb", "policy": "deny", "format": "glob" },
{ "match": "dan*", "policy": "allow", "format": "exact" },
],
"policy": "deny"
}
This sets up an authorization rule that allows 'fred', 'bob' and anyone
whose name starts with 'dan', except for 'danb'. Everyone unmatched is
denied.
The object can be loaded on the comand line using
-object authz-list-file,id=authz0,filename=/etc/qemu/vnc.acl,refresh=yes
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
In many cases a single VM will just need to whitelist a single identity
as the allowed user of network services. This is especially the case for
TLS live migration (optionally with NBD storage) where we just need to
whitelist the x509 certificate distinguished name of the source QEMU
host.
Via QMP this can be configured with:
{
"execute": "object-add",
"arguments": {
"qom-type": "authz-simple",
"id": "authz0",
"props": {
"identity": "fred"
}
}
}
Or via the command line
-object authz-simple,id=authz0,identity=fred
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Add a new display backend that will configure Spice to allow a remote
client to control QEMU in a similar fashion as other QEMU display
backend/UI like GTK.
For this to work, it will set up Spice server with a unix socket, and
register a VC chardev that will be exposed as Spice ports. A QMP
monitor is also exposed as a Spice port, this allows the remote client
fuller qemu control and state handling.
- doesn't handle VC set_echo() - this doesn't seem a strong
requirement, very few front-end use it
- spice options can be tweaked with other -spice arguments
- Windows support shouldn't be hard to do, but will probably use a TCP
port instead
- we may want to watch the child process to quit automatically if it
crashed
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Tested-by: Victor Toso <victortoso@redhat.com>
Message-id: 20190221110703.5775-12-marcandre.lureau@redhat.com
[ kraxel: squash incremental fix ]
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The option is only a dummy since a long time. We've finally deprecated
it in QEMU v3.0, so it's time to remove it now.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <1549545296-18903-3-git-send-email-thuth@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
It's been deprecated since QEMU 3.0, and nobody complained so far, so
it is time to remove this option now.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1544684731-18828-1-git-send-email-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Our command line interface is really quite overcrowded, we should avoid
duplicated options that do the same thing in just a slightly different
way. "-accel hax" is shorter and more generic that "-enable-hax", so
there is really no real usage for the latter option. "-enable-hax" has
been deprecated since two releases, and nobody complained so far, so
it's time to remove this now.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1544790073-23049-1-git-send-email-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The -no-frame option has been deprecated with QEMU v2.12. It was only
useful with SDL1.2 - now that we've removed support for SDL1.2, we
can certainly remove the -no-frame option, too.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-id: 1549351769-19620-1-git-send-email-thuth@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
xend have been replaced by libxenlight (libxl) for many Xen releases
now.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Stefano Stabellini <sstabellini@kernel.org>
It is broken since Xen 4.9 [1] and it will not build in Xen 4.12. Also,
it is not built by default since QEMU 2.6.
[1] https://lists.xenproject.org/archives/html/xen-devel/2018-09/msg00313.html
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Stefano Stabellini <sstabellini@kernel.org>
macOS provides pthread_setname_np that doesn't have thread id argument.
Signed-off-by: Roman Bolshakov <r.bolshakov@yadro.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The "handle" fsdev backend was deprecated in QEMU 2.12.0 with:
commit db3b3c7281
Author: Greg Kurz <groug@kaod.org>
Date: Mon Jan 8 11:18:23 2018 +0100
9pfs: deprecate handle backend
This backend raise some concerns:
- doesn't support symlinks
- fails +100 tests in the PJD POSIX file system test suite [1]
- requires the QEMU process to run with the CAP_DAC_READ_SEARCH
capability, which isn't recommended for security reasons
This backend should not be used and wil be removed. The 'local'
backend is the recommended alternative.
[1] https://www.tuxera.com/community/posix-test-suite/
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
It has passed the two release cooling period without any complaint.
Remove it now.
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
The share=on/off property is used to modified mmap() MAP_SHARED
setting. Make it on by default for convenience and compatibility
reasons.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
EGL headless has been missing from QEMU's help or man page, we should
mention that such a thing exists, especially since projects like libvirt
might rely on that. This patch also adds the newly introduced option for
egl-headless 'rendernode'.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Message-id: 87ef678b0934d3abba66c46c9e65b57119d29295.1542362949.git.eskultet@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
It has been unmaintained since years, and there were only trivial or
tree-wide changes to the related files since many years, so the
code is likely very bitrotten and broken. For example the following
segfaults as soon as as you press a key:
qemu-system-x86_64 -usb -device usb-bt-dongle -bt hci -bt device:keyboard
Since we are not aware of anybody using bluetooth with the current
version of QEMU, let's mark the subsystem as deprecated, with a special
request for the users to write to the qemu-devel mailing list in case
they still use it (so we could revert the deprecation status in that
case).
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-id: 1542016830-19189-1-git-send-email-thuth@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
New option "websocket" added to allow using WebSocket protocol for
chardev socket backend.
Example:
-chardev socket,websocket,server,id=...
Signed-off-by: Julia Suvorova <jusual@mail.ru>
Message-Id: <20181018223501.21683-3-jusual@mail.ru>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
This new usernet option can be used to add data for option 66 (tftp
server name) in the BOOTP reply, which is useful in PXE based automatic
OS install such as OpenBSD.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Tested-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Documentation describing -rtc option updated to better match current
implementation and highlight some important specifics.
Signed-off-by: Artem Pisarenko <artem.k.pisarenko@gmail.com>
Message-Id: <1b245c6c0803d4bf11dcbf9eb32f34af8c2bd0b4.1539846575.git.artem.k.pisarenko@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When using the "-device" option, the property is called "mac".
"macaddr" is only used for the legacy "-net nic" option.
Reported-by: Harald Hoyer <harald@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Fixing cache-clean-interval documentation following the recent change to
a default of 600 seconds on supported plarforms (only Linux currently).
Signed-off-by: Leonid Bloch <lbloch@janustech.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The default cache-clean-interval is set to 10 minutes, in order to lower
the overhead of the qcow2 caches (before the default was 0, i.e.
disabled).
* For non-Linux platforms the default is kept at 0, because
cache-clean-interval is not supported there yet.
Signed-off-by: Leonid Bloch <lbloch@janustech.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The upper limit on the L2 cache size is increased from 1 MB to 32 MB
on Linux platforms, and to 8 MB on other platforms (this difference is
caused by the ability to set intervals for cache cleaning on Linux
platforms only).
This is done in order to allow default full coverage with the L2 cache
for images of up to 256 GB in size (was 8 GB). Note, that only the
needed amount to cover the full image is allocated. The value which is
changed here is just the upper limit on the L2 cache size, beyond which
it will not grow, even if the size of the image will require it to.
Signed-off-by: Leonid Bloch <lbloch@janustech.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Sufficient L2 cache can noticeably improve the performance when using
large images with frequent I/O.
Previously, unless 'cache-size' was specified and was large enough, the
L2 cache was set to a certain size without taking the virtual image size
into account.
Now, the L2 cache assignment is aware of the virtual size of the image,
and will cover the entire image, unless the cache size needed for that is
larger than a certain maximum. This maximum is set to 1 MB by default
(enough to cover an 8 GB image with the default cluster size) but can
be increased or decreased using the 'l2-cache-size' option. This option
was previously documented as the *maximum* L2 cache size, and this patch
makes it behave as such, instead of as a constant size. Also, the
existing option 'cache-size' can limit the sum of both L2 and refcount
caches, as previously.
Signed-off-by: Leonid Bloch <lbloch@janustech.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Leonid Bloch <lbloch@janustech.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
These options likely do not work as expected as soon as the user
tries to use more than one network interface at once. The parameters
have been marked as deprecated since QEMU v2.6, so users had plenty
of time to move their scripts to the new syntax. Time to remove the
old parameters now.
Reviewed-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Acked-by: Peter Krempa <pkrempa@redhat.com>
Acked-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Deprecated since two releases, nobody complained, thus it's time to
remove them now.
Acked-by: Peter Krempa <pkrempa@redhat.com>
Acked-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
It's the same as -no-user-config and marked as deprecated since three
releases already. Time to remove it now.
Acked-by: Peter Krempa <pkrempa@redhat.com>
Acked-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The "-balloon" option has been replaced by "-device virtio-balloon".
It's been marked as deprecated since two releases, and nobody
complained, so let's remove it now.
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
Acked-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The 'tls-creds' option accepts the name of a TLS credentials
object. This replaced the usage of 'tls', 'x509' and 'x509verify'
options in 2.5.0. These deprecated options were grandfathered in
when the deprecation policy was introduded in 2.10.0, so can now
finally be removed.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20180725092751.21767-3-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This includes nvdimm persistence fixes queued before the release.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJbepoTAAoJECgfDbjSjVRpLioH/3BPps8FLh4x2gZSq3B+u72O
RYUA3I3TilEGyc9yf8o7e1Hf+pQAJBEmulcnKxXFVWZIJ1GVLPt4NZCMQGiPDnJL
+RCT/Q64PUy09hRjddAasikrvXa4YOsRgBgJJToO7v9PSQSaU3fC7O3hNea7KcF/
C4SSqkUgxyDhCCYHHblpKxFz/wtwy4ZaCGSdozIdmKNPJ6/ye8wOQ1Mq9e1Mwp18
S6ilJub5IwB6aM2KVMmX4AFomF4u2cn153ts8fI+Dyo4/NE6P4+viDlz3BOBKdzm
kmd49h6/n4Lenoo4oI1yNHSuIJJTVfvnoLu6rG7mPbQKgxNd1uN4KuUIygU5PCY=
=Xcaj
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
pc: fixes
This includes nvdimm persistence fixes queued before the release.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Mon 20 Aug 2018 11:38:11 BST
# gpg: using RSA key 281F0DB8D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>"
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* remotes/mst/tags/for_upstream:
migration/ram: ensure write persistence on loading all data to PMEM.
migration/ram: Add check and info message to nvdimm post copy.
mem/nvdimm: ensure write persistence to PMEM in label emulation
hostmem-file: add the 'pmem' option
configure: add libpmem support
memory, exec: switch file ram allocation functions to 'flags' parameters
memory, exec: Expose all memory block related flags.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This option has been deprecated for two releases; remove it.
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Acked-by: Halil Pasic <pasic@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
This reinstates commit b008326744,
which was temporarily reverted for the 3.0 release so that libvirt gets
some extra time to update their command lines.
The -drive option serial was deprecated in QEMU 2.10. It's time to
remove it.
Tests need to be updated to set the serial number with -global instead
of using the -drive option.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
This reinstates commit eae3bd1eb7,
which was temporarily reverted for the 3.0 release so that libvirt gets
some extra time to update their command lines.
The -drive option addr was deprecated in QEMU 2.10. It's time to remove
it.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
This reinstates commit a7aff6dd10,
which was temporarily reverted for the 3.0 release so that libvirt gets
some extra time to update their command lines.
The -drive options cyls, heads, secs and trans were deprecated in
QEMU 2.10. It's time to remove them.
hd-geo-test tested both the old version with geometry options in -drive
and the new one with -device. Therefore the code using -drive doesn't
have to be replaced there, we just need to remove the -drive test cases.
This in turn allows some simplification of the code.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
When QEMU emulates vNVDIMM labels and migrates vNVDIMM devices, it
needs to know whether the backend storage is a real persistent memory,
in order to decide whether special operations should be performed to
ensure the data persistence.
This boolean option 'pmem' allows users to specify whether the backend
storage of memory-backend-file is a real persistent memory. If
'pmem=on', QEMU will set the flag RAM_PMEM in the RAM block of the
corresponding memory region. If 'pmem' is set while lack of libpmem
support, a error is generated.
Signed-off-by: Junyan He <junyan.he@intel.com>
Signed-off-by: Haozhong Zhang <haozhong.zhang@intel.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
QEMU options have a single dash (but also work as double dash for
convenience and compatibility). Most options are listed with single
dash in command line help but some were listed with two dashes.
Normalize these to have the same format as the others.
Left --preconfig as that is mentioned as double dash everywhere so I
assume that is the preferred form for that.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Acked-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20180716193312.A5BA17456B9@zero.eik.bme.hu>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Committing to the current --preconfig / exit-preconfig interface
before it has seen any use is premature. Mark both as experimental,
the former in documentation, the latter by renaming it to
x-exit-preconfig.
See the previous commit for more detailed rationale.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180705091402.26244-3-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Acked-by: Eduardo Habkost <ehabkost@redhat.com>
Acked-by: Igor Mammedov <imammedo@redhat.com>
[Straightforward conflict with commit 514337c142 resolved]
This reverts commit a7aff6dd10.
Hold off removing this for one more QEMU release (current libvirt
release still uses it.)
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This reverts commit eae3bd1eb7.
Reverted to avoid conflicts for geometry options revert.
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This reverts commit b008326744.
Hold off removing this for one more QEMU release (current libvirt
release still uses it.)
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Pre-Shared Keys (PSK) is a simpler mechanism for enabling TLS
connections than using certificates. It requires only a simple secret
key:
$ mkdir -m 0700 /tmp/keys
$ psktool -u rjones -p /tmp/keys/keys.psk
$ cat /tmp/keys/keys.psk
rjones:d543770c15ad93d76443fb56f501a31969235f47e999720ae8d2336f6a13fcbc
The key can be secretly shared between clients and servers. Clients
must specify the directory containing the "keys.psk" file and a
username (defaults to "qemu"). Servers must specify only the
directory.
Example NBD client:
$ qemu-img info \
--object tls-creds-psk,id=tls0,dir=/tmp/keys,username=rjones,endpoint=client \
--image-opts \
file.driver=nbd,file.host=localhost,file.port=10809,file.tls-creds=tls0,file.export=/
Example NBD server using qemu-nbd:
$ qemu-nbd -t -x / \
--object tls-creds-psk,id=tls0,endpoint=server,dir=/tmp/keys \
--tls-creds tls0 \
image.qcow2
Example NBD server using nbdkit:
$ nbdkit -n -e / -fv \
--tls=on --tls-psk=/tmp/keys/keys.psk \
file file=disk.img
Signed-off-by: Richard W.M. Jones <rjones@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
With this flag, kvm allows guest to control host CPU power state. This
increases latency for other processes using same host CPU in an
unpredictable way, but if decreases idle entry/exit times for the
running VCPU, so to use it QEMU needs a hint about whether host CPU is
overcommitted, hence the flag name.
Follow-up patches will expose this capability to guest
(using mwait leaf).
Based on a patch by Wanpeng Li <kernellwp@gmail.com> .
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20180622192148.178309-2-mst@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We currently have got three ways of turning on the HAX accelerator:
"-machine accel=hax", "-accel hax" and "-enable-hax". That's really
confusing and overloaded. Since "-accel" is our preferred way to enable
an accelerator nowadays, and "-accel hax" is even less to type than
"-enable-hax", let's deprecate the "-enable-hax" option now.
Note: While "-enable-kvm" is available since a long time and can hardly be
removed since it is used in a lot of upper layer tools and scripts, the
"-enable-hax" option is still rather new and not very widespread yet, so
I think that it should be OK if we remove this in a couple of releases again
(we'll see whether someone complains after seeing the deprecation message -
then we could still reconsider to keep it if there a well-founded reasons).
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1529950933-28347-1-git-send-email-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The newline was removed by commit c97d6d2c, and broke -help output:
Before this patch:
$ qemu-system-x86_64 -help | grep smp
thread=single|multi (enable multi-threaded TCG)-smp [...]
After this patch:
$ qemu-system-x86_64 -help | grep smp
-smp [cpus=]n[,maxcpus=cpus][,cores=cores][,threads=threads][,sockets=sockets]
Fixes: c97d6d2cdf
Cc: Sergio Andres Gomez Del Real <sergio.g.delreal@gmail.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20180611195607.3015-1-ehabkost@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The -drive option serial was deprecated in QEMU 2.10. It's time to
remove it.
Tests need to be updated to set the serial number with -global instead
of using the -drive option.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
The -drive option addr was deprecated in QEMU 2.10. It's time to remove
it.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
The -drive options cyls, heads, secs and trans were deprecated in
QEMU 2.10. It's time to remove them.
hd-geo-test tested both the old version with geometry options in -drive
and the new one with -device. Therefore the code using -drive doesn't
have to be replaced there, we just need to remove the -drive test cases.
This in turn allows some simplification of the code.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
This patch will allow the user to include the domainname option in
replies from the built-in DHCP server.
Signed-off-by: Benjamin Drung <benjamin.drung@profitbricks.com>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
This option allows pausing QEMU in the new RUN_STATE_PRECONFIG state,
allowing the configuration of QEMU from QMP before the machine jumps
into board initialization code of machine_run_board_init()
The intent is to allow management to query machine state and additionally
configure it using previous query results within one QEMU instance
(i.e. eliminate the need to start QEMU twice, 1st to query board specific
parameters and 2nd for actual VM start using query results for
additional parameters).
The new option complements -S option and could be used with or without
it. The difference is that -S pauses QEMU when the machine is completely
initialized with all devices wired up and ready to execute guest code
(QEMU needs only to unpause VCPUs to let guest execute its code),
while the "preconfig" option pauses QEMU early before board specific init
callback (machine_run_board_init) is executed and allows the configuration
of machine parameters which will be used by board init code.
When early introspection/configuration is done, command 'exit-preconfig'
should be used to exit RUN_STATE_PRECONFIG and transition to the next
requested state (i.e. if -S is used then QEMU will pause the second
time when board/device initialization is completed or start guest
execution if -S isn't provided on CLI)
PS:
Initially 'preconfig' is planned to be used for configuring numa
topology depending on board specified possible cpus layout.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <1526059483-42847-1-git-send-email-imammedo@redhat.com>
[ehabkost: Changed "since 2.13" to "since 3.0"]
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Version: GnuPG v1
iQEcBAABAgAGBQJa+UAZAAoJEO8Ells5jWIRTJIIAIcpNROupxHEfcAQKU7lIqys
qx/FxKp+lknzzQMwUfmZwT3PuBD+tWuE7ugXgzjVulvE11F+Z3QBPTDBtOObaMa1
qpgIF3zzrNxtuWMc/72Q8/wEE1wtBUo+WTAGw9Xp1dVomYOOsg1wa7dsKdZhRfz7
nIwDW2ftw3/mx+uTW2/a163v+IDDL9L+HOLibQHWUxOMM39ASchiqAXLF4mfhpwH
xr0OPd7wtcmrDsD/CLbdkGCJ/+vsXnY8pzNmy1RjJuDpWpqlgYpJJPtLBfXBo9VA
91sz5+KryzjpXXzKcQuhiU020O1dIKIe3PWqK6z0x0UjtZ1Yox5adZ3eFomHHwU=
=bIws
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/jasowang/tags/net-pull-request' into staging
# gpg: Signature made Mon 14 May 2018 08:51:53 BST
# gpg: using RSA key EF04965B398D6211
# gpg: Good signature from "Jason Wang (Jason Wang on RedHat) <jasowang@redhat.com>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 215D 46F4 8246 689E C77F 3562 EF04 965B 398D 6211
* remotes/jasowang/tags/net-pull-request:
net: Get rid of 'vlan' terminology and use 'hub' instead in the doc files
net: Get rid of 'vlan' terminology and use 'hub' instead in the source files
net: Remove the deprecated "vlan" parameter
net: Fix memory leak in net_param_nic()
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
It's been marked as deprecated since QEMU v2.9.0, so that should have
been enough time for everybody to either just drop unnecessary "vlan=0"
parameters, to switch to the modern -device + -netdev syntax for connecting
guest NICs with host network backends, or to switch to the "hubport" netdev
in case hubs are really wanted instead.
Buglink: https://bugs.launchpad.net/qemu/+bug/658904
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
We've never documented this option in our qemu-doc, so apart from the users
that already used the old qemu-kvm fork before, most users should not be
aware of this option at all. It's been marked as deprecated in the source
code for a long time already, and officially marked as deprecated in the
documentation since QEMU v2.10, so it should be fine to remove this now.
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1525453270-23074-5-git-send-email-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Deprecated since the beginning when it was added for compatibility with
the ancient qemu-kvm fork of QEMU, and it even printed out the deprecation
warning since right from the start (i.e. QEMU v1.3.0), so it's really time
to remove this now.
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1525453270-23074-4-git-send-email-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The -tdf options has been removed with d07aa197c5,
but apparently I forgot to remove the corresponding two lines from
qemu-options.hx, so this option is still "available" and just silently
ignored. Kill it now for good.
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1525453270-23074-2-git-send-email-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The qemu-doc already states that this option is only maintained for
backward compatibility and "-device virtconsole" should be used
instead. So let's take the next step and mark this option officially
as deprecated.
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1525446790-16139-1-git-send-email-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This allows the caller to specify a uid and gid to use, even if there
is no corresponding password entry. This will be useful in certain
Xen configurations.
We don't support just -runas <uid> because: (i) deprivileging without
calling setgroups would be ineffective (ii) given only a uid we don't
know what gid we ought to use (since uids may eppear in multiple
passwd file entries with different gids).
Signed-off-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
CC: Paolo Bonzini <pbonzini@redhat.com>
CC: Markus Armbruster <armbru@redhat.com>
CC: Daniel P. Berrange <berrange@redhat.com>
CC: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
This was added in 13f1243, but is missing from qemu-options.hx
Signed-off-by: Christophe Fergeau <cfergeau@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
"-net" is clearly a legacy option. Yet we still use it in almost all
examples in the qemu documentation, and many other spots in the network
chapter. We should make it less prominent that users are not lured into
using it so often anymore. So instead of starting the network chapter with
"-net nic" and documenting "-net <backend>" below "-netdev <backend>"
everywhere, all the "-net" related documentation is now moved to the end
of the chapter. The new "-nic" option is moved to the beginning of the
chapter instead, with a new example that should demonstrate how "-nic"
can be used to shortcut "-device" with "-netdev". The examples in this
chapter are changed to use the "-device" and "-netdev" options or
"-nic" instead of "-net nic -net <backend>".
While we're at it, also remove a legacy remark about very old Linux
distributions. Also remove the "[...]" from the examples in this chapter
since we are not using this ellipsis in any other examples in our docu-
mentation.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
We have a clear replacement, so let's deprecate it.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-Id: <20180224154033.29559-8-mreitz@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Add a new memory encryption object 'sev-guest'. The object will be used
to create encrypted VMs on AMD EPYC CPU. The object provides the properties
to pass guest owner's public Diffie-hellman key, guest policy and session
information required to create the memory encryption context within the
SEV firmware.
e.g to launch SEV guest
# $QEMU \
-object sev-guest,id=sev0 \
-machine ....,memory-encryption=sev0
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When CPU supports memory encryption feature, the property can be used to
specify the encryption object to use when launching an encrypted guest.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Marcel Apfelbaum <marcel@redhat.com>
Cc: Stefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There are two issues with the documentation of the --balloon parameter:
First, "--balloon none" is simply doing nothing. Even if a machine had a
balloon device by default, this option is not disabling anything, it is
simply ignored. Thus let's simply drop this option from the documentation
to avoid to confuse the users (but keep the code in vl.c for backward
compatibility).
Second, the documentation claims that "--balloon virtio" is the default
mode, but this is not true anymore since commit 382f074371.
Since that commit, the option also has no real use case anymore, since
you can simply use "--device virtio-balloon" nowadays instead. Thus to
simplify our complex parameter zoo a little bit, let's deprecate the
the parameter now and tell the user to use "--device virtio-balloon"
instead.
Fixes: 382f074371
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1519796303-13257-1-git-send-email-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The legacy "-net" option can be quite confusing for the users since most
people do not expect to get a "vlan" hub between their emulated guest
hardware and the host backend. But so far, we are also not able to get
rid of "-net" completely, since it is the only way to configure on-board
NICs that can not be instantiated via "-device" yet. It's also a little
bit shorter to type "-net nic -net tap" instead of "-device xyz,netdev=n1
-netdev tap,id=n1".
So what we need is a new convenience option that is shorter to type than
the full -device + -netdev stuff, and which can be used to configure the
on-board NICs that can not be handled via -device yet. Thus this patch now
provides such a new option "--nic": It adds an entry in the nd_table to
configure a on-board / default NIC, creates a host backend and connects
the two directly, without a confusing "vlan" hub inbetween.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
"-net dump" has been marked as deprecated since QEMU v2.10, since it
only works with the deprecated 'vlan' parameter (or hubs). Network
dumping should be done with "-object filter-dump" nowadays instead.
Since nobody complained so far about the deprecation message, let's
finally get rid of "-net dump" now.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
According to net/Makefile.objs we only link in the vhost-user code
if CONFIG_POSIX has been set. So the help screen should also only
show this information if CONFIG_POSIX has been defined.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Currently only file backed memory backend can
be created with a "share" flag in order to allow
sharing guest RAM with other processes in the host.
Add the "share" flag also to RAM Memory Backend
in order to allow remapping parts of the guest RAM
to different host virtual addresses. This is needed
by the RDMA devices in order to remap non-contiguous
QEMU virtual addresses to a contiguous virtual address range.
Moved the "share" flag to the Host Memory base class,
modified phys_mem_alloc to include the new parameter
and a new interface memory_region_init_ram_shared_nomigrate.
There are no functional changes if the new flag is not used.
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
The spaces between the parameters in the chardev and tpmdev sections
are rather confusing than helpful, and prevent that the lists can be
copy-n-pasted easily for real usage. We also don't use such spaces
in other sections in the documentation, e.g. with the -netdev option,
so let's be consistent and remove the spaces in the chardev and tpmdev
sections, too.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Introduces the configure support for the new Windows Hypervisor Platform that
allows for hypervisor acceleration from usermode components on the Windows
platform.
Signed-off-by: Justin Terry (VM) <juterry@microsoft.com>
Message-Id: <1516655269-1785-2-git-send-email-juterry@microsoft.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a new memory backend, similar to hostmem-file, except that it
doesn't need to create files. It also enforces memory sealing.
This backend is mainly useful for sharing the memory with other
processes.
Note that Linux supports transparent huge-pages of shmem/memfd memory
since 4.8. It is relatively easier to set up THP than a dedicate
hugepage mount point by using "madvise" in
/sys/kernel/mm/transparent_hugepage/shmem_enabled.
Since 4.14, memfd allows to set hugetlb requirement explicitly.
Pending for merge in 4.16 is memfd sealing support for hugetlb backed
memory.
Usage:
-object memory-backend-memfd,id=mem1,size=1G
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20180201132757.23063-5-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The vlan concept is marked as deprecated, so we should not use
this for examples in the documentation anymore.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
QEMU can emulate hubs to connect NICs and netdevs. This is currently
primarily used for the mis-named 'vlan' feature of the networking
subsystem. Now the 'vlan' feature has been marked as deprecated, since
its name is rather confusing and the users often rather mis-configure
their network when trying to use it. But while the 'vlan' parameter
should be removed at one point in time, the basic idea of emulating
a hub in QEMU is still good: It's useful for bundling up the output of
multiple NICs into one single l2tp netdev for example.
Now to be able to use the hubport feature without 'vlan's, there is one
missing piece: The possibility to connect a hubport to a netdev, too.
This patch adds this possibility by introducing a new "netdev=..."
parameter to the hubports.
To bundle up the output of multiple NICs into one socket netdev, you can
now run QEMU with these parameters for example:
qemu-system-ppc64 ... -netdev socket,id=s1,connect=:11122 \
-netdev hubport,hubid=1,id=h1,netdev=s1 \
-netdev hubport,hubid=1,id=h2 -device e1000,netdev=h2 \
-netdev hubport,hubid=1,id=h3 -device virtio-net-pci,netdev=h3
For using the socket netdev, you have got to start another QEMU as the
receiving side first, for example with network dumping enabled:
qemu-system-x86_64 -M isapc -netdev socket,id=s0,listen=:11122 \
-device ne2k_isa,netdev=s0 \
-object filter-dump,id=f1,netdev=s0,file=/tmp/dump.dat
After the ppc64 guest tried to boot from both NICs, you can see in the
dump file (using Wireshark, for example), that the output of both NICs
(the e1000 and the virtio-net-pci) has been successfully transfered
via the socket netdev in this case.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
The option have been marked as deprecated since QEMU 2.10, and so far
nobody complained that the host, serial, disk and net options are urgently
required anymore. So let's now get rid at least of this legacy pile, to
simplify the usb code quite a bit.
This patch removes the usbdevices host, serial, disk and net. These devices
use their own complicated parameter parsing mechanisms, so they are just
ugly to maintain, without real benefit for the users (the users can use the
corresponding "-device" parameters instead which have the same complexity
as the "-usbdevice" devices here).
Note that the other rather simple -usbdevice options (mouse, tablet, etc.)
are not removed yet (the code is really simple here, so it does not hurt
much to keep it), as well as the two devices "braille" and "bt" which are
easier to use with -usbdevice than with -device.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-id: 1515519171-20315-1-git-send-email-thuth@redhat.com
[kraxel] delete some usb_host_device_open() leftovers.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
When mmap(2) the backend files, QEMU uses the host page size
(getpagesize(2)) by default as the alignment of mapping address.
However, some backends may require alignments different than the page
size. For example, mmap a device DAX (e.g., /dev/dax0.0) on Linux
kernel 4.13 to an address, which is 4K-aligned but not 2M-aligned,
fails with a kernel message like
[617494.969768] dax dax0.0: qemu-system-x86: dax_mmap: fail, unaligned vma (0x7fa37c579000 - 0x7fa43c579000, 0x1fffff)
Because there is no common approach to get such alignment requirement,
we add the 'align' option to 'memory-backend-file', so that users or
management utils, which have enough knowledge about the backend, can
specify a proper alignment via this option.
Signed-off-by: Haozhong Zhang <haozhong.zhang@intel.com>
Message-Id: <20171211072806.2812-2-haozhong.zhang@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
[ehabkost: fixed typo, fixed error_setg() format string]
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
It's been marked as deprecated since QEMU v2.10.0, and so far nobody
complained that we should keep it, so let's remove this legacy option
now to simplify the code quite a bit.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This file begins tracking the files that will be the code base for HVF
support in QEMU. This code base is part of Google's QEMU version of
their Android emulator, and can be found at
https://android.googlesource.com/platform/external/qemu/+/emu-master-dev
This code is based on Veertu Inc's vdhh (Veertu Desktop Hosted
Hypervisor), found at https://github.com/veertuinc/vdhh. Everything is
appropriately licensed under GPL v2-or-later, except for the code inside
x86_task.c and x86_task.h, which, deriving from KVM (the Linux kernel),
is licensed GPL v2-only.
This code base already implements a very great deal of functionality,
although Google's version removed from Vertuu's the support for APIC
page and hyperv-related stuff. According to the Android Emulator Release
Notes, Revision 26.1.3 (August 2017), "Hypervisor.framework is now
enabled by default on macOS for 32-bit x86 images to improve performance
and macOS compatibility", although we better use with caution for, as the
same Revision warns us, "If you experience issues with it specifically,
please file a bug report...". The code hasn't seen much update in the
last 5 months, so I think that we can further develop the code with
occasional visiting Google's repository to see if there has been any
update.
On top of Google's code, the following changes were made:
- add code to the configure script to support the --enable-hvf argument.
If the OS is Darwin, it checks for presence of HVF in the system. The
patch also adds strings related to HVF in the file qemu-options.hx.
QEMU will only support the modern syntax style '-M accel=hvf' no enable
hvf; the legacy '-enable-hvf' will not be supported.
- fix styling issues
- add glue code to cpus.c
- move HVFX86EmulatorState field to CPUX86State, changing the
the emulation functions to have a parameter with signature 'CPUX86State *'
instead of 'CPUState *' so we don't have to get the 'env'.
Signed-off-by: Sergio Andres Gomez Del Real <Sergio.G.DelReal@gmail.com>
Message-Id: <20170913090522.4022-2-Sergio.G.DelReal@gmail.com>
Message-Id: <20170913090522.4022-3-Sergio.G.DelReal@gmail.com>
Message-Id: <20170913090522.4022-5-Sergio.G.DelReal@gmail.com>
Message-Id: <20170913090522.4022-6-Sergio.G.DelReal@gmail.com>
Message-Id: <20170905035457.3753-7-Sergio.G.DelReal@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Looks like we missed to document that it is also possible to specify
a netdev with "-net nic" - which is very useful if you want to
configure your on-board NIC to use a backend that has been specified
with "-netdev".
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
It's only printing a warning since QEMU v1.3.0, so nobody should use
this anymore today. Let's get rid of this now.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1513619065-31722-1-git-send-email-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Cc: Ronnie Sahlberg <ronniesahlberg@gmail.com>
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: Max Reitz <mreitz@redhat.com>
Cc: qemu-block@nongnu.org
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20171002140307.5292-6-armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Ronnie Sahlberg <ronniesahlberg@gmail.com>
-iscsi ended up under the "Device URL Syntax" heading by a sequence of
errors, as explained in the previous commit. Move it under the "Block
device options" heading. Nothing left under "Device URL Syntax";
drop the heading.
Cc: Ronnie Sahlberg <ronniesahlberg@gmail.com>
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: Max Reitz <mreitz@redhat.com>
Cc: qemu-block@nongnu.org
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20171002140307.5292-5-armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Ronnie Sahlberg <ronniesahlberg@gmail.com>
Commit 0f5314a (v1.0) added section "Device URL Syntax" to
qemu-options.hx. It's enclosed in STEXI..ETEXI, thus affects only
qemu-options.texi, not --help. It appears as a subsection under
section "Invocation". Similarly, qemu.1 has it as a subsection under
"OPTIONS".
Commit f9dadc9 (v1.1.0) dropped new option -iscsi into the middle of
this section. No effect on qemu-options.texi. It appears in --help
run together with the "Bluetooth(R) options:" header.
Commit c70a01e (v1.5.0) gives it is own heading in --help by moving
commit 0f5314a's DEFHEADING(Device URL Syntax:) outside STEXI..ETEXI.
Trouble is the heading makes no sense for -iscsi.
Move all of the "Device URL Syntax" Texinfo to qemu-doc.texi. Mark it
for inclusion in qemu.1 with '@c man begin NOTES'. This turns it into
a separate section outside the list of options both in qemu-doc and in
qemu.1.
There's substantial overlap with the existing qemu-doc section "Disk
Images". Mark with a TODO comment.
Output of --help will be fixed next.
Cc: Ronnie Sahlberg <ronniesahlberg@gmail.com>
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: Max Reitz <mreitz@redhat.com>
Cc: qemu-block@nongnu.org
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20171002140307.5292-4-armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Ronnie Sahlberg <ronniesahlberg@gmail.com>
[Unwanted @node dropped]
