TCG register spill/fill uses tcg_out_ld/st with all types,
not necessarily going through INDEX_op_{ld,st}_vec.
Cc: qemu-stable@nongnu.org
Fixes: 16288ded94 ("tcg/loongarch64: Lower basic tcg vec ops to LSX")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2336
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Song Gao <gaosong@loongson.cn>
Tested-by: Song Gao <gaosong@loongson.cn>
Fill the new argument from any condition within the opcode.
Not yet used within any backend.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Define as 0 for all tcg backends.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Because there are more call clobbered registers than
call saved registers, we begin with all registers as
call clobbered and then reset those that are saved.
This was missed when we introduced the LSX support.
Cc: qemu-stable@nongnu.org
Fixes: 16288ded94 ("tcg/loongarch64: Lower basic tcg vec ops to LSX")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2136
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20240201233414.500588-1-richard.henderson@linaro.org>
On LoongArch host, we got an Aborted from tcg_out_mov().
qemu-x86_64 configure with '--enable-debug'.
> (gdb) b /home1/gaosong/code/qemu/tcg/loongarch64/tcg-target.c.inc:312
> Breakpoint 1 at 0x2576f0: file /home1/gaosong/code/qemu/tcg/loongarch64/tcg-target.c.inc, line 312.
> (gdb) run hello
[...]
> Thread 1 "qemu-x86_64" hit Breakpoint 1, tcg_out_mov (s=0xaaaae91760 <tcg_init_ctx>, type=TCG_TYPE_V128, ret=TCG_REG_V2,
> arg=TCG_REG_V0) at /home1/gaosong/code/qemu/tcg/loongarch64/tcg-target.c.inc:312
> 312 g_assert_not_reached();
> (gdb) bt
> #0 tcg_out_mov (s=0xaaaae91760 <tcg_init_ctx>, type=TCG_TYPE_V128, ret=TCG_REG_V2, arg=TCG_REG_V0)
> at /home1/gaosong/code/qemu/tcg/loongarch64/tcg-target.c.inc:312
> #1 0x000000aaaad0fee0 in tcg_reg_alloc_mov (s=0xaaaae91760 <tcg_init_ctx>, op=0xaaaaf67c20) at ../tcg/tcg.c:4632
> #2 0x000000aaaad142f4 in tcg_gen_code (s=0xaaaae91760 <tcg_init_ctx>, tb=0xffe8030340 <code_gen_buffer+197328>,
> pc_start=4346094) at ../tcg/tcg.c:6135
[...]
> (gdb) c
> Continuing.
> **
> ERROR:/home1/gaosong/code/qemu/tcg/loongarch64/tcg-target.c.inc:312:tcg_out_mov: code should not be reached
> Bail out! ERROR:/home1/gaosong/code/qemu/tcg/loongarch64/tcg-target.c.inc:312:tcg_out_mov: code should not be reached
>
> Thread 1 "qemu-x86_64" received signal SIGABRT, Aborted.
> 0x000000fff7b1c390 in raise () from /lib64/libc.so.6
> (gdb) q
Fixes: 16288ded94 ("tcg/loongarch64: Lower basic tcg vec ops to LSX")
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20231120065916.374045-1-gaosong@loongson.cn>
The movcond opcode is now mandatory for backends to implement.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20231026041404.1229328-7-richard.henderson@linaro.org>
The movcond opcode is now mandatory for backends to implement.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20231026041404.1229328-4-richard.henderson@linaro.org>
Use new registers for the output, so that we never overlap
the input address, which could happen for user-only.
This avoids a "tmp = addr + 0" in that case.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Jiajie Chen <c@jia.je>
Message-Id: <20230916220151.526140-3-richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20231004090629.37473-6-philmd@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Fix:
In file included from ../tcg/tcg.c:735:
/home1/gaosong/bugfix/qemu/tcg/loongarch64/tcg-target.c.inc: In function ‘tcg_out_vec_op’:
/home1/gaosong/bugfix/qemu/tcg/loongarch64/tcg-target.c.inc:1855:9: error: a label can only be part of a statement and a declaration is not a statement
TCGCond cond = args[3];
^~~~~~~
Signed-off-by: gaosong <gaosong@loongson.cn>
Message-Id: <20230926075819.3602537-1-gaosong@loongson.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This hook may emit code at the beginning of the TB.
Suggested-by: Jordan Niethe <jniethe5@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
If LSX is available, use LSX instructions to implement 128-bit load &
store when MO_128 is required, otherwise use two 64-bit loads & stores.
Signed-off-by: Jiajie Chen <c@jia.je>
Message-Id: <20230908022302.180442-17-c@jia.je>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Pass vece to tcg_target_const_match() to allow correct interpretation of
const args of vector ops.
Signed-off-by: Jiajie Chen <c@jia.je>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230908022302.180442-4-c@jia.je>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
LSX support on host cpu is detected via hwcap.
Lower the following ops to LSX:
- dup_vec
- dupi_vec
- dupm_vec
- ld_vec
- st_vec
Signed-off-by: Jiajie Chen <c@jia.je>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230908022302.180442-3-c@jia.je>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Add opcodes and encoder functions for LSX.
Generated from
https://github.com/jiegec/loongarch-opcodes/tree/qemu-lsx.
Signed-off-by: Jiajie Chen <c@jia.je>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230908022302.180442-2-c@jia.je>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Introduce a new opcode for negative setcond.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Replace the separate defines with TCG_TARGET_HAS_extr_i64_i32,
so that the two parts of backend-specific type changing cannot
be out of sync.
Reported-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: <20230822175127.1173698-1-richard.henderson@linaro.org>
Often, the only thing we need to know about the TCG host
is the register size.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Disconnect the layout of ArchCPU from TCG compilation.
Pass the relative offset of 'env' and 'neg.tlb.f' as a parameter.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This makes CPUTLBEntry agnostic to the address size of the guest.
When 32-bit addresses are in effect, we can simply read the low
32 bits of the 64-bit field. Similarly when we need to update
the field for setting TLB_NOTDIRTY.
For TCG backends that could in theory be big-endian, but in
practice are not (arm, loongarch, riscv), use QEMU_BUILD_BUG_ON
to document and ensure this is not accidentally missed.
For s390x, which is always big-endian, use HOST_BIG_ENDIAN anyway,
to document the reason for the adjustment.
For sparc64 and ppc64, always perform a 64-bit load, and rely on
the following 32-bit comparison to ignore the high bits.
Rearrange mips and ppc if ladders for clarity.
Reviewed-by: Anton Johansson <anjo@rev.ng>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Disconnect guest page size from TCG compilation.
While this could be done via exec/target_page.h, we want to cache
the value across multiple memory access operations, so we might
as well initialize this early.
The changes within tcg/ are entirely mechanical:
sed -i s/TARGET_PAGE_BITS/s->page_bits/g
sed -i s/TARGET_PAGE_MASK/s->page_mask/g
Reviewed-by: Anton Johansson <anjo@rev.ng>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
All uses replaced with TCGContext.addr_type.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
For 32-bit hosts, we cannot simply rely on TCGContext.addr_bits,
as we need one or two host registers to represent the guest address.
Create the new opcodes and update all users. Since we have not
yet eliminated TARGET_LONG_BITS, only one of the two opcodes will
ever be used, so we can get away with treating them the same in
the backends.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Add opcodes for backend support for 128-bit memory operations.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Replace the unparameterized TCG_TARGET_HAS_MEMORY_BSWAP macro
with a function with a memop argument.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Test the final byte of an unaligned access.
Use BSTRINS.D to clear the range of bits, rather than AND.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This should be true of all loongarch64 running Linux.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Instead of using helper_unaligned_{ld,st}, use the full load/store helpers.
This will allow the fast path to increase alignment to implement atomicity
while not immediately raising an alignment exception.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
With the current structure of cputlb.c, there is no difference
between the little-endian and big-endian entry points, aside
from the assert. Unify the pairs of functions.
Hoist the qemu_{ld,st}_helpers arrays to tcg.c.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The softmmu tlb uses TCG_REG_TMP[0-2], not any of the normally available
registers. Now that we handle overlap betwen inputs and helper arguments,
we can allow any allocatable reg.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Use tcg_out_ld_helper_args, tcg_out_ld_helper_ret,
and tcg_out_st_helper_args.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Merge tcg_out_tlb_load, add_qemu_ldst_label, tcg_out_test_alignment,
tcg_out_zext_addr_if_32_bit, and some code that lived in both
tcg_out_qemu_ld and tcg_out_qemu_st into one function that returns
HostAddress and TCGLabelQemuLdst structures.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Collect the 2 parts of the host address into a struct.
Reorg tcg_out_qemu_{ld,st}_direct to use it.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Interpret the variable argument placement in the caller. Shift some
code around slightly to share more between softmmu and user-only.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
