For architectures which don't set HAS_AUDIO_CHOICE, improve the
'-soundhw help' message so that it doesn't simply print an empty
list, implying no sound support at all.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: malc <av1474@comtv.ru>
Allow negotiation to receive the name of the requested export from
the client. Passing a NULL export to nbd_client_new will cause
the server to send the extended negotiation header. The exp field
is then filled during negotiation.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use a simple state machine with the following states:
- RUNNING => accepting connections
- TERMINATE => main loop must call nbd_export_close/put, and not accept
connections anymore
- TERMINATING => waiting for pending requests to finish
- TERMINATED => the NBDExport has been closed
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In order to exit cleanly from qemu-nbd, add a callback that triggers
when an NBDExport is closed. In the case of qemu-nbd it will exit the
main loop.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We will use a similar two-phase destruction for NBDExport, so we need
each NBDClient to add a reference to NBDExport.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Because nbd_client_close removes the I/O handlers for the client
socket, there is no way that any suspended coroutines are restarted.
This will be a problem with the QEMU embedded NBD server, because
we will have a QMP command to forcibly close all connections with
the clients.
Instead, we can exploit the reference counting of NBDClients; shutdown the
client socket, which will make it readable and writeable. Also call the
close callback, which will release the user's reference. The coroutines
then will fail and exit cleanly, and release all remaining references,
until the last refcount finally triggers the closure of the client.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* kwolf/for-anthony:
block: Don't forget to delete temporary file
Don't require encryption password for 'qemu-img info' command
qemu-img: Add json output option to the info command.
qapi: Add SnapshotInfo and ImageInfo.
ahci: properly reset PxCMD on HBA reset
block: fix block tray status
vdi: Fix warning from clang
block/curl: Fix wrong free statement
ide: Fix error messages from static code analysis (no real error)
ATAPI: STARTSTOPUNIT only eject/load media if powercondition is 0
sheepdog: fix savevm and loadvm
* stefanha/trivial-patches:
configure: fix seccomp check
arch_init.c: add missing '%' symbols before PRIu64 in debug printfs
kvm: Fix warning from static code analysis
qapi: Fix enumeration typo error
console: Clean up bytes per pixel calculation
Fix copy&paste typos in documentation comments
linux-user: Remove #if 0'd cpu_get_real_ticks() definition
ui: Fix spelling in comment (ressource -> resource)
Spelling fixes in comments and macro names (ressource -> resource)
Fix spelling (licenced -> licensed) in GPL
Spelling fixes in comments and documentation
srp: Don't use QEMU_PACKED for single elements of a structured type
* stefanha/net:
net: EAGAIN handling for net/socket.c TCP
net: EAGAIN handling for net/socket.c UDP
net: asynchronous send/receive infrastructure for net/socket.c
net: broadcast hub packets if at least one port can receive
net: fix usbnet_receive() packet drops
net: clean up usbnet_receive()
net: add -netdev options to man page
net: do not report queued packets as sent
net: add receive_disabled logic to iov delivery path
eepro100: Fix network hang when rx buffers run out
xen: flush queue when getting an event
e1000: flush queue whenever can_receive can go from false to true
net: notify iothread after flushing queue
* qemu-kvm/uq/master:
kvm: Rename irqchip_inject_ioctl to irq_set_ioctl
kvm: Stop flushing coalesced MMIO on vmexit
VGA: Flush coalesced MMIO on related MMIO/PIO accesses
memory: Flush coalesced MMIO on mapping and state changes
memory: Fold memory_region_update_topology into memory_region_transaction_commit
memory: Use transaction_begin/commit also for single-step operations
memory: Flush coalesced MMIO on selected region access
kvm-all.c: Move init of irqchip_inject_ioctl out of kvm_irqchip_create()
update-linux-headers.sh: Don't hard code list of architectures
This reverts commit 66d5499b37.
This commit broke --target-list="x86_64-softmmu" and the fix isn't immediatley
obvious.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
cpu_physical_memory_write_rom(), despite the name, can also be used to
write images into RAM - and will often be used that way if the machine
uses load_image_targphys() into RAM addresses.
However, cpu_physical_memory_write_rom(), unlike cpu_physical_memory_rw()
doesn't invalidate any cached TBs which might be affected by the region
written.
This was breaking reset (under full emu) on the pseries machine - we loaded
our firmware image into RAM, and while executing it rewrite the code at
the entry point (correctly causing a TB invalidate/refresh). When we
reset the firmware image was reloaded, but the TB from the rewrite was
still active and caused us to get an illegal instruction trap.
This patch fixes the bug by duplicating the tb invalidate code from
cpu_physical_memory_rw() in cpu_physical_memory_write_rom().
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
tcp_chr_connect(), unlike for example udp_chr_update_read_handler() does
not check if the fd it is using is valid (>= 0) before passing it to
qemu_set_fd_handler2(). If using e.g. a TCP serial port, which is not
initially connected, this can result in -1 being passed to FD_ISSET, which
has undefined behaviour. On x86 it seems to harmlessly return 0, but on
PowerPC, it causes a fortify buffer overflow error to be thrown.
This patch fixes this by putting an extra test in tcp_chr_connect(), and
also adds an assert qemu_set_fd_handler2() to catch other such errors on
all platforms, rather than just some.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
commit c3767ed0eb
qemu-char: (Re-)connect for tcp_chr_write() unconnected writing
Has no hope of working because tcp_chr_connect() does not actually connect.
455aa1e08 just fixes the SEGV with server() but the attempt to connect a client
socket is still completely broken.
This patch reverts both.
Reported-by: Richard W.M. Jones <rjones@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
We have debugcon these days to listen on those ports that receive debug
messages. Also drop the others that have no effect anymore.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
It allows to disable memory merge support (KSM on Linux), which is
enabled by default otherwise.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Now that CONFIG_TCG_PASS_AREG0 is enabled for all targets,
remove dead code and support for !CONFIG_TCG_PASS_AREG0 case.
Remove dyngen-exec.h and all references to it. Although included by
hw/spapr_hcall.c, it does not seem to use it.
Remove unused HELPER_CFLAGS.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Add an explicit CPUState parameter instead of relying on AREG0
and switch to AREG0 free mode.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Acked-by: Aurelien Jarno <aurelien@aurel32.net>
Add an explicit CPUState parameter instead of relying on AREG0
and switch to AREG0 free mode.
Acked-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Add an explicit CPUCRISState parameter instead of relying on AREG0, and
use cpu_ld* in translation and interrupt handling. Remove AREG0 swapping
in tlb_fill(). Switch to AREG0 free mode
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Add an explicit CPUCRISState parameter instead of relying on AREG0.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Convert code load functions and switch to AREG0 free mode.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Convert remaining helpers to AREG0 free mode: add an explicit
CPUState parameter instead of relying on AREG0.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Add an explicit CPUState parameter instead of relying on AREG0.
For easier review, convert only op helpers which don't return any value.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Add an explicit CPUState parameter instead of relying on AREG0
and switch to AREG0 free mode.
Tested-by: Guan Xuetao <gxt@mprc.pku.edu.cn>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Fixes build against uClibc.
uClibc provides 2 versions of clock_gettime(), one with realtime
support and one without (this is so you can avoid linking in -lrt
unless actually needed). This means that the clock_gettime() don't
need -lrt. We still need it for timer_create() so we check for this
function in addition.
We also need check if -lm is needed for isnan().
Both -lm and -lrt are needed for libs_qga.
Signed-off-by: Natanael Copa <ncopa@alpinelinux.org>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
DEF_HELPER_FLAGS_5 was added some time ago without adjusting
MAX_OPC_PARAM_IARGS.
Fixing the definition becomes more important as QEMU is using
an increasing number of helper functions called with 5 arguments.
Add also a comment to avoid future problems when DEF_HELPER_FLAGS_6
will be added.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Currently, if libseccomp is missing but the user explicitly requested
seccomp support using --enable-seccomp, configure silently ignores the
situation and disables seccomp support.
This is unlike all other tests that explicitly fail in such situation.
Fix that.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Stefan Hajnoczi <stefanha@gmail.com>
Replace spinning send_all() with a proper non-blocking send. When the
socket write buffer limit is reached, we should stop trying to send and
wait for the socket to become writable again.
Non-blocking TCP sockets can return in two different ways when the write
buffer limit is reached:
1. ret = -1 and errno = EAGAIN/EWOULDBLOCK. No data has been written.
2. ret < total_size. Short write, only part of the message was
transmitted.
Handle both cases and keep track of how many bytes have been written in
s->send_index. (This includes the 'length' header before the actual
payload buffer.)
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Implement asynchronous send for UDP (or other SOCK_DGRAM) sockets. If
send fails with EAGAIN we wait for the socket to become writable again.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
The net/socket.c net client is not truly asynchronous. This patch
borrows the qemu_set_fd_handler2() code from net/tap.c as the basis for
proper asynchronous send/receive.
Only read packets from the socket when the peer is able to receive.
This avoids needless queuing.
Later patches implement asynchronous send.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
In commit 60c07d933c ("net: fix
qemu_can_send_packet logic") the "VLAN" broadcast behavior was changed
to queue packets if any net client cannot receive. It turns out that
this was not actually the right fix and just hides the real bug that
hw/usb/dev-network.c:usbnet_receive() clobbers its receive buffer when
called multiple times in a row. The commit also introduced a new bug
that "VLAN" packets would not be sent if one of multiple net clients was
down.
The hw/usb/dev-network.c bug has since been fixed, so this patch reverts
broadcast behavior to send packets as long as one net client can
receive. Packets simply get queued for the net clients that are
temporarily unable to receive.
Reported-by: Roy.Li <rongqing.li@windriver.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
The USB network interface has a single buffer which the guest reads
from. This patch prevents multiple calls to usbnet_receive() from
clobbering the input buffer. Instead we queue packets until buffer
space becomes available again.
This is inspired by virtio-net and e1000 rxbuf handling.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
The USB network interface has two code paths depending on whether or not
RNDIS mode is enabled. Refactor usbnet_receive() so that there is a
common path throughout the function instead of duplicating everything
across if (is_rndis(s)) ... else ... code paths.
Clean up coding style and 80 character line wrap along the way.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Document the -netdev syntax which supercedes the older -net syntax.
This patch is a first step to making -netdev prominent in the QEMU
manual.
Reported-by: Anatoly Techtonik <techtonik@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Net send functions have a return value where 0 means the packet has not
been sent and will be queued. A non-zero value means the packet was
sent or an error caused the packet to be dropped.
This patch fixes two instances where packets are queued but we return
their size. This causes callers to believe the packets were sent. When
the caller uses the async send interface this creates a real problem
because the callback will be invoked for a packet that the caller
believed to be already sent. This bug can cause double-frees in the
caller.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
