Information on the implementation of the ACPI ERST support.
Signed-off-by: Eric DeVolder <eric.devolder@oracle.com>
Acked-by: Ani Sinha <ani@anisinha.ca>
Message-Id: <20220223143322.927136-2-ani@anisinha.ca>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This feature widens physical addresses (and intermediate physical
addresses for 2-stage translation) from 48 to 52 bits, when using
4k or 16k pages.
This introduces the DS bit to TCR_ELx, which is RES0 unless the
page size is enabled and supports LPA2, resulting in the effective
value of DS for a given table walk. The DS bit changes the format
of the page table descriptor slightly, moving the PS field out to
TCR so that all pages have the same sharability and repurposing
those bits of the page table descriptor for the highest bits of
the output address.
Do not yet enable FEAT_LPA2; we need extra plumbing to avoid
tickling an old kernel bug.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220301215958.157011-17-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This feature widens physical addresses (and intermediate physical
addresses for 2-stage translation) from 48 to 52 bits, when using
64k pages. The only thing left at this point is to handle the
extra bits in the TTBR and in the table descriptors.
Note that PAR_EL1 and HPFAR_EL2 are nominally extended, but we don't
mask out the high bits when writing to those registers, so no changes
are required there.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220301215958.157011-11-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This feature is relatively small, as it applies only to
64k pages and thus requires no additional changes to the
table descriptor walking algorithm, only a change to the
minimum TSZ (which is the inverse of the maximum virtual
address space size).
Note that this feature widens VBAR_ELx, but we already
treat the register as being 64 bits wide.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220301215958.157011-10-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
There are no longer any VMStateDescription structs in the tree which
use the load_state_old support for custom handling of incoming
migration from very old QEMU. Remove the mechanism entirely.
This includes removing one stray useless setting of
minimum_version_id_old in a VMStateDescription with no load_state_old
function, which crept in after the global weeding-out of them in
commit 17e3134061.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20220215175705.3846411-1-peter.maydell@linaro.org>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Francisco Iglesias <francisco.iglesias@xilinx.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
- restore TESTS/IMAGES filtering to docker tests
- add NOUSER to alpine image
- bump lcitool version
- move arm64/s390x cross build images to lcitool
- add aarch32 runner CI scripts
- expand testing to more vectors
- update s390x jobs to focal for gitlab/travis
- disable threadcount for all sh4
- fix semihosting SYS_HEAPINFO and test
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAmIdGJEACgkQ+9DbCVqe
KkQZYQf+Ndlm651dulO4J55puk8cUOMrCrDvqVkxM/V7ZD4GKyoa9/PstfOspLkQ
hXNANtfcr7zsXxo7J7PKVpX3y+upxCMLLK9NqHXW3O8mOSoru44caLko6FdmwWkU
KmoToEM3jgxJxqrE8ijLz1gxo79TVT0m3OyyKlMf9C+Wf4BfUe4NXjt/VMcecrDd
wKJnvjWyrk67yOyPRDnT2XlG1HdphD90g8xPxiK1tzkEQEWJlojTLSZENQksa1V6
JBu1mwT/KPodkllzTQcHHjGn4/vsdzFqjqV+8d3xXiSmr/QdeyByUeDhJ7aI4qdY
aKoX3hoIUdENmPxqXozuVBy/S4gLoA==
=MY0T
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stsquad/tags/pull-testing-and-semihosting-280222-1' into staging
Testing and semihosting updates:
- restore TESTS/IMAGES filtering to docker tests
- add NOUSER to alpine image
- bump lcitool version
- move arm64/s390x cross build images to lcitool
- add aarch32 runner CI scripts
- expand testing to more vectors
- update s390x jobs to focal for gitlab/travis
- disable threadcount for all sh4
- fix semihosting SYS_HEAPINFO and test
# gpg: Signature made Mon 28 Feb 2022 18:46:41 GMT
# gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [full]
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44
* remotes/stsquad/tags/pull-testing-and-semihosting-280222-1:
tests/tcg: port SYS_HEAPINFO to a system test
semihosting/arm-compat: replace heuristic for softmmu SYS_HEAPINFO
tests/tcg: completely disable threadcount for sh4
gitlab: upgrade the job definition for s390x to 20.04
travis.yml: Update the s390x jobs to Ubuntu Focal
tests/tcg: add vectorised sha512 versions
tests/tcg: add sha512 test
tests/tcg: build sha1-vector with O3 and compare
tests/tcg/ppc64: clean-up handling of byte-reverse
gitlab: add a new aarch32 custom runner definition
scripts/ci: allow for a secondary runner
scripts/ci: add build env rules for aarch32 on aarch64
tests/docker: introduce debian-riscv64-test-cross
tests/docker: update debian-s390x-cross with lcitool
tests/docker: update debian-arm64-cross with lcitool
tests/lcitool: update to latest version
tests/docker: add NOUSER for alpine image
tests/docker: restore TESTS/IMAGES filtering
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* Removal of the swift-bmc machine
* New Secure Boot Controller model
* Improvements on the rainier machine
* Various small cleanups
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEEoPZlSPBIlev+awtgUaNDx8/77KEFAmIbOjkACgkQUaNDx8/7
7KHl4w//QySSZtdkk0fLIHg6q4aSeehLZWro5JVRs+ZGtmM6ixi95RNQwEyiM3g6
fHbkgsE3YHh3rnX5KckTPwMq+LctLSebrUtOvHQyTcHckCjwn90Vyaw7hSBROeGz
8Yieb6qda2kEnX61yGlE80go3WDuA2kyRw2bvHOhT5Vzsb2Xq8xflziFv+gHH4NT
Hf/AiCSh6uCILT0JyhZF4Swzip+jDGytryPdBThBtptShyscCgIKb9GqVTVHbWXi
dCe+eDDPUm7npOfP5RmHE249tz+SwS+YejTShewt0FALzglxu/GZI3UNEg0Ays+0
E7uWeSFrgQE5lZvht3Z7Duc0GCGQxYkVwhUtr2e/9dLUIRTrcdj/55h/VgeaSzR5
3RXtbwNAaumE0JdgKXFwmBuPNRNzZa89hrBcvswkcVXtlB2hsWlWLniKJHbafNHk
vOMABrEeWCZYT794J0yFrunCUFPCNUXpPYJJdRBeIktiHzRGJYHraX7i/aJ5ltse
VaDVbEdHaB11H8Y2cQJtjda/zM84DaqGQj9EkQPCRe7w3bnWQLSJ1qcahszV0P+Z
y+DkoFRr3LKVE9dIS/N4gwIBWk5AymqSqAVizQ61rq8ZetUNdgTT12EC39djhATi
OfudYiQKc33gvYOLLFSST2tiv/NK/GfIGc2Ag1qME30NYnam50Q=
=0F2M
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/legoater/tags/pull-aspeed-20220227' into staging
aspeed queue:
* Removal of the swift-bmc machine
* New Secure Boot Controller model
* Improvements on the rainier machine
* Various small cleanups
# gpg: Signature made Sun 27 Feb 2022 08:45:45 GMT
# gpg: using RSA key A0F66548F04895EBFE6B0B6051A343C7CFFBECA1
# gpg: Good signature from "Cédric Le Goater <clg@kaod.org>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: A0F6 6548 F048 95EB FE6B 0B60 51A3 43C7 CFFB ECA1
* remotes/legoater/tags/pull-aspeed-20220227:
aspeed/sdmc: Add trace events
aspeed/smc: Add an address mask on segment registers
aspeed: Introduce a create_pca9552() helper
aspeed: rainier: Add strap values taken from hardware
aspeed: rainier: Add i2c LED devices
ast2600: Add Secure Boot Controller model
arm: Remove swift-bmc machine
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Although running on aarch64 hardware we can still target 32bit builds
with a cross compiler and run the resulting binaries.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220225172021.3493923-10-alex.bennee@linaro.org>
It was scheduled for removal in 7.0.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
- Improves documentation of SSH fingerprint checking
- Fixes SHA256 fingerprints with non-blockdev usage
- Blocks the clone3, setns, unshare & execveat syscalls
with seccomp
- Blocks process spawning via clone syscall, but allows
threads, with seccomp
- Takes over seccomp maintainer role
- Expands firmware descriptor spec to allow flash
without NVRAM
-----BEGIN PGP SIGNATURE-----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=PeCY
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/berrange-gitlab/tags/misc-next-pull-request' into staging
This misc series of changes:
- Improves documentation of SSH fingerprint checking
- Fixes SHA256 fingerprints with non-blockdev usage
- Blocks the clone3, setns, unshare & execveat syscalls
with seccomp
- Blocks process spawning via clone syscall, but allows
threads, with seccomp
- Takes over seccomp maintainer role
- Expands firmware descriptor spec to allow flash
without NVRAM
# gpg: Signature made Thu 17 Feb 2022 11:57:13 GMT
# gpg: using RSA key DAF3A6FDB26B62912D0E8E3FBE86EBB415104FDF
# gpg: Good signature from "Daniel P. Berrange <dan@berrange.com>" [full]
# gpg: aka "Daniel P. Berrange <berrange@redhat.com>" [full]
# Primary key fingerprint: DAF3 A6FD B26B 6291 2D0E 8E3F BE86 EBB4 1510 4FDF
* remotes/berrange-gitlab/tags/misc-next-pull-request:
docs: expand firmware descriptor to allow flash without NVRAM
MAINTAINERS: take over seccomp from Eduardo Otubo
seccomp: block setns, unshare and execveat syscalls
seccomp: block use of clone3 syscall
seccomp: fix blocking of process spawning
seccomp: add unit test for seccomp filtering
seccomp: allow action to be customized per syscall
block: print the server key type and fingerprint on failure
block: support sha256 fingerprint with pre-blockdev options
block: better document SSH host key fingerprint checking
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This is the BMC attached to the OpenBMC Mori board.
Signed-off-by: Patrick Venture <venture@google.com>
Reviewed-by: Chris Rauer <crauer@google.com>
Reviewed-by: Ilkyun Choi <ikchoi@google.com>
Message-id: 20220208233104.284425-1-venture@google.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Currently there is no way for a board model's Kconfig stanza to
say "I have an i2c bus which the user can plug an i2c device into,
build all the free-standing i2c devices". The Kconfig mechanism
for this is the "device group". Add an I2C_DEVICES group along
the same lines as the existing PCI_DEVICES. Simple free-standing
i2c devices which a user might plausibly want to be able to
plug in on the QEMU commandline should have
default y if I2C_DEVICES
and board models which have an i2c bus that is user-accessible
should use
imply I2C_DEVICES
to cause those pluggable devices to be built.
In this commit we mark only a fairly conservative set of i2c devices
as belonging to the I2C_DEVICES group: the simple sensors and RTCs
(not including PMBus devices or devices which need GPIO lines to be
connected).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Hao Wu <wuhaotsh@google.com>
Message-id: 20220208155911.3408455-2-peter.maydell@linaro.org
Provide an option "-o security_label/no_security_label" to enable/disable
security label functionality. By default these are turned off.
If enabled, server will indicate to client that it is capable of handling
one security label during file creation. Typically this is expected to
be a SELinux label. File server will set this label on the file. It will
try to set it atomically wherever possible. But its not possible in
all the cases.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Message-Id: <20220208204813.682906-11-vgoyal@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
The current firmware descriptor schema for flash requires that both the
executable to NVRAM template paths be provided. This is fine for the
most common usage of EDK2 builds in virtualization where the separate
_CODE and _VARS files are provided.
With confidential computing technology like AMD SEV, persistent storage
of variables may be completely disabled because the firmware requires a
known clean state on every cold boot. There is no way to express this
in the firmware descriptor today.
Even with regular EDK2 builds it is possible to create a firmware that
has both executable code and variable persistence in a single file. This
hasn't been commonly used, since it would mean every guest bootup would
need to clone the full firmware file, leading to redundant duplicate
storage of the code portion. In some scenarios this may not matter and
might even be beneficial. For example if a public cloud allows users to
bring their own firmware, such that the user can pre-enroll their own
secure boot keys, you're going to have this copied on disk for each
tenant already. At this point the it can be simpler to just deal with
a single file rather than split builds. The firmware descriptor ought
to be able to express this combined firmware model too.
This all points towards expanding the schema for flash with a 'mode'
concept:
- "split" - the current implicit behaviour with separate files
for code and variables.
- "combined" - the alternate behaviour where a single file contains
both code and variables.
- "stateless" - the confidential computing use case where storage
of variables is completely disable, leaving only the code.
Reviewed-by: Kashyap Chamarthy <kchamart@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The docs still illustrate host key fingerprint checking using the old
md5 hashes which are considered insecure and obsolete. Change it to
illustrate using a sha256 hash. Also show how to extract the hash
value from the known_hosts file.
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Since the hypervisor extension been non experimental and enabled for
default CPU, the previous command is no longer available and the
option `x-h=true` or `h=true` is also no longer required.
Signed-off-by: Yu Li <liyu.yukiteru@bytedance.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <9040401e-8f87-ef4a-d840-6703f08d068c@bytedance.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
There's a nice new Rust implementation out there; recommend people
do new work on that.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20220210174714.19843-1-dgilbert@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
It's likely broken, and nobody cared for picking it up again
during the deprecation phase, so let's remove this now.
Since this is the last entry in deprecated_targets_list, remove
the related code in the configure script, too.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Cédric Le Goater <clg@kaod.org>
Acked-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20211215084958.185214-1-thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220112112722.3641051-32-alex.bennee@linaro.org>
Users wanting this sort of functionality should turn to TCG plugins
instead.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Cc: Luis Vilanova <vilanova@imperial.ac.uk>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20220204204335.1689602-18-alex.bennee@linaro.org>
Ideally we should keep all our automatic formatting gubins in here.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220204204335.1689602-13-alex.bennee@linaro.org>
Also rstfy the documentation for AMD SEV, and link it.
The documentation for PEF had been merged into the pseries doc,
fix the reference.
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20220204161251.241877-1-cohuck@redhat.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
qemu-img convert documents the backing file and backing format options
as follows:
[-B backing_file [-F backing_fmt]]
whereas qemu-img create has this:
[-b backing_file] [-F backing_fmt]
That is, for convert, we document that -F cannot be given without -B,
while for create, way say that they are independent.
Indeed, it is technically possible to give -F without -b, because it is
left to the block driver to decide whether this is an error or not, so
sometimes it is:
$ qemu-img create -f qed -F qed test.qed 64M
Formatting 'test.qed', fmt=qed size=67108864 backing_fmt=qed [...]
And sometimes it is not:
$ qemu-img create -f qcow2 -F qcow2 test.qcow2 64M
Formatting 'test.qcow2', fmt=qcow2 cluster_size=65536 [...]
qemu-img: test.qcow2: Backing format cannot be used without backing file
Generally, it does not make much sense, though, and users should only
give -F with -b, so document it that way, as we have already done for
qemu-img convert (commit 1899bf4737).
Reported-by: Tingting Mao <timao@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220131135908.32393-1-hreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We did not add documentation to the storage daemon's man page for fuse's
allow-other option when it was introduced, so do that now.
Fixes: 8fc54f9428 ("export/fuse: Add allow-other option")
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220131103124.20325-1-hreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
* Update copyright dates to 2022
* hw/armv7m: Fix broken VMStateDescription
* hw/char/exynos4210_uart: Fix crash on trying to load VM state
* rtc: Move RTC function prototypes to their own header
* xlnx-versal-virt: Support PMC SLCR
* xlnx-versal-virt: Support OSPI flash memory controller
* scripts: Explain the difference between linux-headers and standard-headers
* target/arm: Log CPU index in 'Taking exception' log
* arm_gicv3_its: Various bugfixes and cleanups
* arm_gicv3_its: Implement the missing MOVI and MOVALL commands
* ast2600: Fix address mapping of second SPI controller
* target/arm: Use correct entrypoint for SVC taken from Hyp to Hyp
-----BEGIN PGP SIGNATURE-----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=m7N5
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20220128' into staging
target-arm queue:
* Update copyright dates to 2022
* hw/armv7m: Fix broken VMStateDescription
* hw/char/exynos4210_uart: Fix crash on trying to load VM state
* rtc: Move RTC function prototypes to their own header
* xlnx-versal-virt: Support PMC SLCR
* xlnx-versal-virt: Support OSPI flash memory controller
* scripts: Explain the difference between linux-headers and standard-headers
* target/arm: Log CPU index in 'Taking exception' log
* arm_gicv3_its: Various bugfixes and cleanups
* arm_gicv3_its: Implement the missing MOVI and MOVALL commands
* ast2600: Fix address mapping of second SPI controller
* target/arm: Use correct entrypoint for SVC taken from Hyp to Hyp
# gpg: Signature made Fri 28 Jan 2022 15:29:36 GMT
# gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE
* remotes/pmaydell/tags/pull-target-arm-20220128: (32 commits)
target/arm: Use correct entrypoint for SVC taken from Hyp to Hyp
hw/arm: ast2600: Fix address mapping of second SPI controller
hw/intc/arm_gicv3_its: Implement MOVI
hw/intc/arm_gicv3_its: Implement MOVALL
hw/intc/arm_gicv3_its: Check table bounds against correct limit
hw/intc/arm_gicv3_its: Make GITS_BASER<n> RAZ/WI for unimplemented registers
hw/intc/arm_gicv3_its: Provide read accessor for translation_ops
hw/intc/arm_gicv3: Set GICR_CTLR.CES if LPIs are supported
hw/intc/arm_gicv3_redist: Remove unnecessary zero checks
hw/intc/arm_gicv3_its: Sort ITS command list into numeric order
hw/intc/arm_gicv3: Honour GICD_CTLR.EnableGrp1NS for LPIs
hw/intc/arm_gicv3_its: Don't clear GITS_CWRITER on writes to GITS_CBASER
hw/intc/arm_gicv3_its: Don't clear GITS_CREADR when GITS_CTLR.ENABLED is set
hw/intc/arm_gicv3: Initialise dma_as in GIC, not ITS
hw/intc/arm_gicv3_its: Add tracepoints
target/arm: Log CPU index in 'Taking exception' log
scripts: Explain the difference between linux-headers and standard-headers
MAINTAINERS: Remove myself (for raspi).
MAINTAINERS: Add an entry for Xilinx Versal OSPI
hw/arm/xlnx-versal-virt: Connect mt35xu01g flashes to the OSPI
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
It's a new year; update the copyright strings for our
help/version/about information and for our documentation.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20220120124713.288303-1-peter.maydell@linaro.org
* "meson test" switch for iotests
* deprecation of old SGX QAPI
* unexport InterruptStatsProviderClass-related functions
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmHzwdAUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroOlMwgApVO6T934TwuTOFBs02Tp8KcjcKQq
5Qf5PrwbsluE8YixJERAFgfxgzbQKL/iHzkP97KoVo3CFFDc1sss7v3mrbbHxbwB
jiYIgbNjRfBbZq7nNmxf2bcXxTpZYvMNEia0QPyNl1GQ0JS/RFOsEYcyVUPvVmAI
djeESRyku1OS5bS5veqE2tL+AWDuodjHeW78qi+yIDRPx3jHLRzuGpQ/3KtgMN6o
d61h5vVrqdxe1HYH/8sh+qU71w7drpNZVYq8PqkZyit/LXgDMyDDOks1XWarrrJE
9xzNBUNR+B6CuHtNw1DGk4rvsCBV/F0ZVki6guVGoqG8njF3l6xyqRHPbw==
=2/gW
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini-gitlab/tags/for-upstream' into staging
* configure and meson fixes
* "meson test" switch for iotests
* deprecation of old SGX QAPI
* unexport InterruptStatsProviderClass-related functions
# gpg: Signature made Fri 28 Jan 2022 10:13:36 GMT
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* remotes/bonzini-gitlab/tags/for-upstream:
configure: fix parameter expansion of --cross-cc-cflags options
qapi: Cleanup SGX related comments and restore @section-size
check-block: replace -makecheck with TAP output
qemu-iotests: require at least an argument to check-block.sh
build: make check-block a meson test
scripts/mtest2make: add support for SPEED=thorough
check-block.sh: passthrough -jN flag of make to -j N flag of check
meson: Use find_program() to resolve the entitlement.sh script
exec/cpu: Make host pages variables / macros 'target agnostic'
meson.build: Use a function from libfdt 1.5.1 for the library check
intc: Unexport InterruptStatsProviderClass-related functions
docker: add msitools to Fedora/mingw cross
build-sys: fix undefined ARCH error
build-sys: fix a meson deprecation warning
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Without this fix, any use of --cross-cc-cflags-* causes a message like:
$ ../configure --cross-cc-ppc64le=clang --cross-cc-cflags-ppc64le="-target powerpc64le-unknown-linux-gnu -sysroot ..."
../configure: 1: eval: cross_cc_cflags_--cross-cc-cflags-ppc64le=-target: not found
../configure: 3816: export: cross_cc_cflags_--cross-cc-cflags-ppc64le: bad variable name
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Message-Id: <20220120173142.2755077-1-matheus.ferst@eldorado.org.br>
[Fix other occurrences too, noted by Philippe Mathieu-Daudé. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The SGX NUMA patches were merged into Qemu 7.0 release, we need
clarify detailed version history information and also change
some related comments, which make SGX related comments clearer.
The QMP command schema promises backwards compatibility as standard.
We temporarily restore "@section-size", which can avoid incompatible
API breakage. The "@section-size" will be deprecated in 7.2 version.
Suggested-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220120223104.437161-1-yang.zhong@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Previous commits enabled trace events generation for most of QAPI
generated code (except for tests/ and qga/). Let's update documentation
to illustrate it.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20220126161130.3240892-6-vsementsov@virtuozzo.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Move error_propagate() to if (err) and make "if (err)" block mandatory.
This is to simplify further commit, which will bring trace events
generation for QMP commands.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20220126161130.3240892-3-vsementsov@virtuozzo.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Buglink: https://gitlab.com/qemu-project/qemu/-/issues/527
Signed-off-by: Lucas Ramage <lucas.ramage@infinite-omicron.com>
Message-id: 20220105205628.5491-1-oxr463@gmx.us
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: Move to docs/system/devices/ rather than top-level;
fix a pre-existing typo in passing]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add basic support for Pointer Authentication when running a KVM
guest and that the host supports it, loosely based on the SVE
support.
Although the feature is enabled by default when the host advertises
it, it is possible to disable it by setting the 'pauth=off' CPU
property. The 'pauth' comment is removed from cpu-features.rst,
as it is now common to both TCG and KVM.
Tested on an Apple M1 running 5.16-rc6.
Cc: Eric Auger <eric.auger@redhat.com>
Cc: Richard Henderson <richard.henderson@linaro.org>
Cc: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220107150154.2490308-1-maz@kernel.org
[PMM: fixed indentation]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
- fix compiler warnings with ui and sdl
- update QXL/spice dependancy
- skip I/O tests on Alpine
- update fedora image to latest version
- integrate lcitool and regenerate docker images
- favour CONFIG_LINUX_USER over CONFIG_LINUX
- add libfuse3 dependencies to docker images
- add dtb-kaslr-seed control knob to virt machine
- fix build breakage from HMP update
- update docs for C standard and suffix usage
- add more logging for debugging user hole finding
- expand reserve for brk() for static 64 bit programs
- fix bug with linux-user hole calculation
- avoid affecting flags when printing results in float tests
- add float reference files for ppc64
- update FreeBSD to 12.3
- add bison dependancy to tricore images
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAmHm7y4ACgkQ+9DbCVqe
KkSsDwgAgWiOUtnPxNnZ3PuLQpIDCGSotjshCXo9PhPu/SWedvMfTftPU+g3wxbl
+A2GZcNnVPaOrJo7hfDtOtir9UJUFTmyv8KtPhUYmtxxiv3HWM1RvgrBQnMEvo5A
GFAq6jSFclH4HTSxz4FHbEl0TM3feQbSfbMWI6Q1Q+aPm8hWSzhClIqBCwsJJdm8
hi76BE9o94BtvA6Qv2CoPvGsOzpV0X0VXaljf1W927BzJu+b0wEGwIm61+eovNsh
DS2kDZk+PpiYeRN/oC40Z6ozR/Lf/jZ/87AnN3gV/yLDwa5cafA+GtmcKMx1IJIc
BVm0bJo+KzHfYiVjYTJhsU7C2W71PA==
=uBQq
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stsquad/tags/pull-for-7.0-180122-2' into staging
Various testing and other misc updates:
- fix compiler warnings with ui and sdl
- update QXL/spice dependancy
- skip I/O tests on Alpine
- update fedora image to latest version
- integrate lcitool and regenerate docker images
- favour CONFIG_LINUX_USER over CONFIG_LINUX
- add libfuse3 dependencies to docker images
- add dtb-kaslr-seed control knob to virt machine
- fix build breakage from HMP update
- update docs for C standard and suffix usage
- add more logging for debugging user hole finding
- expand reserve for brk() for static 64 bit programs
- fix bug with linux-user hole calculation
- avoid affecting flags when printing results in float tests
- add float reference files for ppc64
- update FreeBSD to 12.3
- add bison dependancy to tricore images
# gpg: Signature made Tue 18 Jan 2022 16:47:42 GMT
# gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [full]
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44
* remotes/stsquad/tags/pull-for-7.0-180122-2: (31 commits)
docker: include bison in debian-tricore-cross
FreeBSD: Upgrade to 12.3 release
test/tcg/ppc64le: Add float reference files
tests/tcg/multiarch: Read fp flags before printf
linux-user: don't adjust base of found hole
linux-user/elfload: add extra logging for hole finding
linux-user: expand reserved brk space for 64bit guests
docs/devel: more documentation on the use of suffixes
docs/devel: update C standard to C11
monitor: move x-query-profile into accel/tcg to fix build
hw/arm: add control knob to disable kaslr_seed via DTB
tests/docker: add libfuse3 development headers
tests/tcg: use CONFIG_LINUX_USER, not CONFIG_LINUX
tests/docker: auto-generate alpine.docker with lcitool
tests/docker: fully expand the alpine package list
tests/docker: fix sorting of alpine image package lists
tests/docker: updates to alpine package list
.gitlab-ci.d/cirrus: auto-generate variables with lcitool
tests/docker: remove ubuntu.docker container
tests/docker: auto-generate opensuse-leap.docker with lcitool
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* More documentation updates (Leonardo)
* Fixes for the 7448 CPU (Fabiano and Cedric)
* Final removal of 403 CPUs and the .load_state_old handler (Cedric)
* More cleanups of PHB4 models (Daniel and Cedric)
-----BEGIN PGP SIGNATURE-----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=M4/2
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/legoater/tags/pull-ppc-20220118' into staging
ppc 7.0 queue:
* More documentation updates (Leonardo)
* Fixes for the 7448 CPU (Fabiano and Cedric)
* Final removal of 403 CPUs and the .load_state_old handler (Cedric)
* More cleanups of PHB4 models (Daniel and Cedric)
# gpg: Signature made Tue 18 Jan 2022 11:59:16 GMT
# gpg: using RSA key A0F66548F04895EBFE6B0B6051A343C7CFFBECA1
# gpg: Good signature from "Cédric Le Goater <clg@kaod.org>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: A0F6 6548 F048 95EB FE6B 0B60 51A3 43C7 CFFB ECA1
* remotes/legoater/tags/pull-ppc-20220118: (31 commits)
ppc/pnv: Remove PHB4 version property
ppc/pnv: Add a 'rp_model' class attribute for the PHB4 PEC
ppc/pnv: Move root port allocation under pnv_pec_default_phb_realize()
ppc/pnv: rename pnv_pec_stk_update_map()
ppc/pnv: remove PnvPhb4PecStack object
ppc/pnv: make PECs create and realize PHB4s
ppc/pnv: remove PnvPhb4PecStack::stack_no
ppc/pnv: move default_phb_realize() to pec_realize()
ppc/pnv: remove stack pointer from PnvPHB4
ppc/pnv: reduce stack->stack_no usage
ppc/pnv: introduce PnvPHB4 'pec' property
ppc/pnv: move phb_regs_mr to PnvPHB4
ppc/pnv: move nest_regs_mr to PnvPHB4
ppc/pnv: change pnv_pec_stk_update_map() to use PnvPHB4
ppc/pnv: move nest_regs[] to PnvPHB4
ppc/pnv: move mmbar0/mmbar1 and friends to PnvPHB4
ppc/pnv: change pnv_phb4_update_regions() to use PnvPHB4
ppc/pnv: move intbar to PnvPHB4
ppc/pnv: move phbbar to PnvPHB4
ppc/pnv: move PCI registers to PnvPHB4
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Using _qemu is a little confusing. Let's use _compat for these sorts
of things. We should also mention _impl which is another common suffix
in the code base.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20220105135009.1584676-25-alex.bennee@linaro.org>
Since 8a9d3d5640 (configure: Use -std=gnu11) we have allowed C11 code
so lets reflect that in the style guide.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20220105135009.1584676-24-alex.bennee@linaro.org>
Generally a guest needs an external source of randomness to properly
enable things like address space randomisation. However in a trusted
boot environment where the firmware will cryptographically verify
components having random data in the DTB will cause verification to
fail. Add a control knob so we can prevent this being added to the
system DTB.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Acked-by: Jerome Forissier <jerome@forissier.org>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Message-Id: <20220105135009.1584676-22-alex.bennee@linaro.org>
This introduces
https://gitlab.com/libvirt/libvirt-ci
as a git submodule at tests/lcitool/libvirt-ci
The 'lcitool' program within this submodule will be used to
automatically generate build environment manifests from a definition
of requirements in tests/lcitool/projects/qemu.yml
It will ultimately be capable of generating
- Dockerfiles
- Package lists for installation in VMs
- Variables for configuring Cirrus CI environments
When a new build pre-requisite is needed for QEMU, if this package
is not currently known to libvirt-ci, it must first be added to the
'mappings.yml' file in the above git repo.
Then the submodule can be updated and the build pre-requisite added
to the tests/lcitool/projects/qemu.yml file. Now all the build env
manifests can be re-generated using 'make lcitool-refresh'
This ensures that when a new build pre-requisite is introduced, it
is added to all the different OS containers, VMs and Cirrus CI
environments consistently.
It also facilitates the addition of containers targetting new distros
or updating existing containers to new versions of the same distro,
where packages might have been renamed.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20211215141949.3512719-8-berrange@redhat.com>
Message-Id: <20220105135009.1584676-8-alex.bennee@linaro.org>
While working on this file, also removed and unused reference in the end of the file. The reference in the text was removed by commit 9f992cca93 (spapr: update spapr hotplug documentation), but the link in the end of the document was not removed then.
Signed-off-by: Leonardo Garcia <lagarcia@br.ibm.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <50ed30232e0e6eafb580c17adec3fba17b873014.1641995058.git.lagarcia@br.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
We do mention the limitation of single parenthood for
memory_region_add_subregion but lets also make it clear how aliases
help solve that conundrum.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220110175104.2908956-7-alex.bennee@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
