Bochs card is normal PCI Express card so it fits better in system with
PCI Express bus. VGA is simple legacy PCI card.
Signed-off-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org>
Reviewed-by: Leif Lindholm <quic_llindhol@quicinc.com>
Message-id: 20230505120936.1097060-1-marcin.juszkiewicz@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Extend the 'mte' property for the virt machine to cover KVM as
well. For KVM, we don't allocate tag memory, but instead enable the
capability.
If MTE has been enabled, we need to disable migration, as we do not
yet have a way to migrate the tags as well. Therefore, MTE will stay
off with KVM unless requested explicitly.
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230428095533.21747-2-cohuck@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The world outside moves to newer and newer cpu cores. Let move SBSA
Reference Platform to something newer as well.
Signed-off-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org>
Reviewed-by: Leif Lindholm <quic_llindhol@quicinc.com>
Message-id: 20230506183417.1360427-1-marcin.juszkiewicz@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
xen_9pfs_free can't use gnttabdev since it is already closed and NULL-ed
out when free is called. Do the teardown in _disconnect(). This
matches the setup done in _connect().
trace-events are also added for the XenDevOps functions.
Signed-off-by: Jason Andryuk <jandryuk@gmail.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Message-Id: <20230502143722.15613-1-jandryuk@gmail.com>
[C.S.: - Remove redundant return in xen_9pfs_free().
- Add comment to trace-events. ]
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Now that the tswap() functions are available for target-independent
code, too, we can move xilinx_ethlite.c from specific_ss to softmmu_ss
to avoid that we have to compile this file multiple times.
Message-Id: <20230508120314.59274-1-thuth@redhat.com>
Reviewed-by: Francisco Iglesias <frasse.iglesias@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The only target specific code that is left in here are two spots that
use TARGET_NAME. Change them to use the new target_name() wrapper
function instead, so we can move the file into the common softmmu_ss
source set. That way we only have to compile this file once, and not
for each target anymore.
Message-Id: <20230424160434.331175-4-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
For being able to create a universal QEMU binary one day, core
files like machine-qmp-cmds.c must not contain any "#ifdef TARGET_..."
parts. Thus let's provide the target specific function via a
function pointer in CPUClass instead, as a first step towards
making this file target independent.
Message-Id: <20230424160434.331175-2-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Kernel commit 292a7d6fca33 ("KVM: s390: pv: fix asynchronous teardown
for small VMs") causes the KVM_PV_ASYNC_CLEANUP_PREPARE ioctl to fail
if the VM is not larger than 2GiB. QEMU would attempt it and fail,
print an error message, and then proceed with a normal teardown.
Avoid attempting to use asynchronous teardown altogether when the VM is
not larger than 2 GiB. This will avoid triggering the error message and
also avoid pointless overhead; normal teardown is fast enough for small
VMs.
Reported-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Fixes: c3a073c610 ("s390x/pv: Add support for asynchronous teardown for reboot")
Link: https://lore.kernel.org/all/20230421085036.52511-2-imbrenda@linux.ibm.com/
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Message-Id: <20230510105531.30623-2-imbrenda@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
[thuth: Fix inline function parameter in pv.h]
Signed-off-by: Thomas Huth <thuth@redhat.com>
The lifetime of the PCIBridgeWindows instance accessed via the windows pointer
in struct PCIBridge is managed separately from the PCIBridge itself.
Triggered by ./qemu-system-x86_64 -M x-remote -display none -monitor stdio
QEMU monitor: device_add cxl-downstream
In some error handling paths (such as the above due to attaching a cxl-downstream
port anything other than a cxl-upstream port) the g_free() of the PCIBridge
windows in pci_bridge_region_cleanup() is called before the final call of
flatview_uref() in address_space_set_flatview() ultimately from
drain_call_rcu()
At one stage this resulted in a crash, currently can still be observed using
valgrind which records a use after free.
When present, only one instance is allocated. pci_bridge_update_mappings()
can operate directly on an instance rather than creating a new one and
swapping it in. Thus there appears to be no reason to not directly
couple the lifetimes of the two structures by embedding the PCIBridgeWindows
within the PCIBridge removing the need for the problematic separate free.
Patch is same as was posted deep in the discussion.
https://lore.kernel.org/qemu-devel/20230403171232.000020bb@huawei.com/
Reported-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20230421122550.28234-1-Jonathan.Cameron@huawei.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
This pull request contain's Sam Li's zoned storage support in the QEMU block
layer and virtio-blk emulation.
v2:
- Sam fixed the CI failures. CI passes for me now. [Richard]
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEhpWov9P5fNqsNXdanKSrs4Grc8gFAmRiWCgACgkQnKSrs4Gr
c8h/7gf+MMm2cGEaf376t8HMwTc6wbXVfbmAlZrge2EXPZfFvEaxj7HClcEraOgV
yJsGWeU6mOw4r68ICJ/4KhrY1cdv+VZym/LsMLMcFUTXFHnyX4pyU3am31FPOI4K
+wrDYJOJhc4DkAESWGgEWiMKpuO/uUEgBmHdW+qPFCl77Yl/eP6H5uNP6nGFn55p
QpS/l8iha7PDkc81EsrjA+e/YI0ubfNSP7+zZElhQ98354CQ0MCfmZ6h9bT+o2bu
R7SBUj80e+2X0a1b9s/2Jz/x8l4TEsl8kr48/Q1usq3GVVkbjEgqsk6wTN13Q/4g
CeIR7E61ZeYzmpb4tLFRIqK2Jw+NEQ==
=Q8xW
-----END PGP SIGNATURE-----
Merge tag 'block-pull-request' of https://gitlab.com/stefanha/qemu into staging
Pull request
This pull request contain's Sam Li's zoned storage support in the QEMU block
layer and virtio-blk emulation.
v2:
- Sam fixed the CI failures. CI passes for me now. [Richard]
# -----BEGIN PGP SIGNATURE-----
#
# iQEzBAABCAAdFiEEhpWov9P5fNqsNXdanKSrs4Grc8gFAmRiWCgACgkQnKSrs4Gr
# c8h/7gf+MMm2cGEaf376t8HMwTc6wbXVfbmAlZrge2EXPZfFvEaxj7HClcEraOgV
# yJsGWeU6mOw4r68ICJ/4KhrY1cdv+VZym/LsMLMcFUTXFHnyX4pyU3am31FPOI4K
# +wrDYJOJhc4DkAESWGgEWiMKpuO/uUEgBmHdW+qPFCl77Yl/eP6H5uNP6nGFn55p
# QpS/l8iha7PDkc81EsrjA+e/YI0ubfNSP7+zZElhQ98354CQ0MCfmZ6h9bT+o2bu
# R7SBUj80e+2X0a1b9s/2Jz/x8l4TEsl8kr48/Q1usq3GVVkbjEgqsk6wTN13Q/4g
# CeIR7E61ZeYzmpb4tLFRIqK2Jw+NEQ==
# =Q8xW
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 15 May 2023 09:04:56 AM PDT
# gpg: using RSA key 8695A8BFD3F97CDAAC35775A9CA4ABB381AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>" [full]
# gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>" [full]
* tag 'block-pull-request' of https://gitlab.com/stefanha/qemu:
docs/zoned-storage:add zoned emulation use case
virtio-blk: add some trace events for zoned emulation
block: add accounting for zone append operation
virtio-blk: add zoned storage emulation for zoned devices
block: add some trace events for zone append
qemu-iotests: test zone append operation
block: introduce zone append write for zoned devices
file-posix: add tracking of the zone write pointers
docs/zoned-storage: add zoned device documentation
block: add some trace events for new block layer APIs
iotests: test new zone operations
block: add zoned BlockDriver check to block layer
block/raw-format: add zone operations to pass through requests
block/block-backend: add block layer APIs resembling Linux ZonedBlockDevice ioctls
block/file-posix: introduce helper functions for sysfs attributes
block/block-common: add zoned device structs
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Sam Li <faithilikerun@gmail.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20230508051916.178322-4-faithilikerun@gmail.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Taking account of the new zone append write operation for zoned devices,
BLOCK_ACCT_ZONE_APPEND enum is introduced as other I/O request type (read,
write, flush).
Signed-off-by: Sam Li <faithilikerun@gmail.com>
Message-id: 20230508051916.178322-3-faithilikerun@gmail.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This patch extends virtio-blk emulation to handle zoned device commands
by calling the new block layer APIs to perform zoned device I/O on
behalf of the guest. It supports Report Zone, four zone oparations (open,
close, finish, reset), and Append Zone.
The VIRTIO_BLK_F_ZONED feature bit will only be set if the host does
support zoned block devices. Regular block devices(conventional zones)
will not be set.
The guest os can use blktests, fio to test those commands on zoned devices.
Furthermore, using zonefs to test zone append write is also supported.
Signed-off-by: Sam Li <faithilikerun@gmail.com>
Message-id: 20230508051916.178322-2-faithilikerun@gmail.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
When ipi mailbox is used, cpu_index is decoded from iocsr register.
cpu maybe does not exist. This patch adds NULL pointer check on
ipi device.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20230512100421.1867848-4-gaosong@loongson.cn>
Add separate macro EXTIOI_CPUS for extioi interrupt controller, extioi
only supports 4 cpu. And set macro LOONGARCH_MAX_CPUS as 256 so that
loongarch virt machine supports more cpus.
Interrupts from external devices can only be routed cpu 0-3 because
of extioi limits, cpu internal interrupt such as timer/ipi can be
triggered on all cpus.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20230512100421.1867848-3-gaosong@loongson.cn>
ipi is used to communicate between cpus, this patch modified
loongarch ipi device as percpu device, so that there are
2 MemoryRegions with ipi device, rather than 2*cpus
MemoryRegions, which may be large than QDEV_MAX_MMIO if
more cpus are added on loongarch virt machine.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20230512100421.1867848-2-gaosong@loongson.cn>
loongarch_ipi_iocsr MRs rely on re-entrant IO through the ipi_send
function. As such, mark these MRs re-entrancy-safe.
Fixes: a2e1753b80 ("memory: prevent dma-reentracy issues")
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Reviewed-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20230506112145.3563708-1-alxndr@bu.edu>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Coverity points out (in CID 1508390) that write_bootloader has
some dead code, where we assign to 'p' and then in the following
line assign to it again. This happened as a result of the
refactoring in commit cd5066f861.
Fix the dead code by removing the 'void *v' variable entirely and
instead adding a cast when calling bl_setup_gt64120_jump_kernel(), as
we do at its other callsite in write_bootloader_nanomips().
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
- fix up xtensa docker container base to current Debian
- document breakpoint and watchpoint support
- clean up the ansible scripts for Ubuntu 22.04
- add a minimal device profile
- drop https on mipsdistros URL
- fix Kconfig bug for XLNX_VERSAL
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAmRbspsACgkQ+9DbCVqe
KkSBowf+JjcVxZMb2kS8pV8WEdAq+fceBYI7mDBSEu0DFqZF+w0XSM+T+VZHyZ8+
QmPeE+McKBUXvq/V4osPnDVVZfBKmwzFN548M6qIMLUbHjbDp94DtudNkAZ0ejhc
+Ack73vzTiTWsGmBaqQxZlcYkZNZiZAhQsTF6cPwna74cDkcRghvd/Zxzy831rVB
gVWhbEkk7SBQhJ+PqRIeso60DbWvCaVDMrkPc2WX8kup6QltbUpoayS/eNOtBkfA
C557eOBxoM8s0cu33O780K5mCPCyk1IaIynvZtmkty0DXUSd5y9SNpsofhAY7BGy
4QdlolLygDgEC3s4bMULGy04nzaylw==
=a+97
-----END PGP SIGNATURE-----
Merge tag 'pull-testing-updates-100523-1' of https://gitlab.com/stsquad/qemu into staging
Testing updates:
- fix up xtensa docker container base to current Debian
- document breakpoint and watchpoint support
- clean up the ansible scripts for Ubuntu 22.04
- add a minimal device profile
- drop https on mipsdistros URL
- fix Kconfig bug for XLNX_VERSAL
# -----BEGIN PGP SIGNATURE-----
#
# iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAmRbspsACgkQ+9DbCVqe
# KkSBowf+JjcVxZMb2kS8pV8WEdAq+fceBYI7mDBSEu0DFqZF+w0XSM+T+VZHyZ8+
# QmPeE+McKBUXvq/V4osPnDVVZfBKmwzFN548M6qIMLUbHjbDp94DtudNkAZ0ejhc
# +Ack73vzTiTWsGmBaqQxZlcYkZNZiZAhQsTF6cPwna74cDkcRghvd/Zxzy831rVB
# gVWhbEkk7SBQhJ+PqRIeso60DbWvCaVDMrkPc2WX8kup6QltbUpoayS/eNOtBkfA
# C557eOBxoM8s0cu33O780K5mCPCyk1IaIynvZtmkty0DXUSd5y9SNpsofhAY7BGy
# 4QdlolLygDgEC3s4bMULGy04nzaylw==
# =a+97
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 10 May 2023 04:04:59 PM BST
# gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44
* tag 'pull-testing-updates-100523-1' of https://gitlab.com/stsquad/qemu:
hw/arm: Select XLNX_USB_SUBSYS for xlnx-zcu102 machine
tests/avocado: use http for mipsdistros.mips.com
gitlab: enable minimal device profile for aarch64 --disable-tcg
gitlab: add ubuntu-22.04-aarch64-without-defaults
scripts/ci: clean-up the 20.04/22.04 confusion in ansible
scripts/ci: add gitlab-runner to kvm group
docs: document breakpoint and watchpoint support
tests/docker: bump the xtensa base to debian:11-slim
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This machine hardcodes initialization of the USB device, so select the
corresponding Kconfig. It is not enough to have it as "default y if
XLNX_VERSAL" at usb/Kconfig because building --without-default-devices
disables the default selection resulting in:
$ ./qemu-system-aarch64 -M xlnx-zcu102
qemu-system-aarch64: missing object type 'usb_dwc3'
Aborted (core dumped)
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230208192654.8854-8-farosas@suse.de>
Message-Id: <20230503091244.1450613-8-alex.bennee@linaro.org>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
There is no need for the AioContext lock in aio_wait_bh_oneshot().
It's easy to remove the lock from existing callers and then switch from
AIO_WAIT_WHILE() to AIO_WAIT_WHILE_UNLOCKED() in aio_wait_bh_oneshot().
Document that the AioContext lock should not be held across
aio_wait_bh_oneshot(). Holding a lock across aio_poll() can cause
deadlock so we don't want callers to do that.
This is a step towards getting rid of the AioContext lock.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20230404153307.458883-1-stefanha@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The PCI Resizable BAR (ReBAR) capability is currently hidden from the
VM because the protocol for interacting with the capability does not
support a mechanism for the device to reject an advertised supported
BAR size. However, when assigned to a VM, the act of resizing the
BAR requires adjustment of host resources for the device, which
absolutely can fail. Linux does not currently allow us to reserve
resources for the device independent of the current usage.
The only writable field within the ReBAR capability is the BAR Size
register. The PCIe spec indicates that when written, the device
should immediately begin to operate with the provided BAR size. The
spec however also notes that software must only write values
corresponding to supported sizes as indicated in the capability and
control registers. Writing unsupported sizes produces undefined
results. Therefore, if the hypervisor were to virtualize the
capability and control registers such that the current size is the
only indicated available size, then a write of anything other than
the current size falls into the category of undefined behavior,
where we can essentially expose the modified ReBAR capability as
read-only.
This may seem pointless, but users have reported that virtualizing
the capability in this way not only allows guest software to expose
related features as available (even if only cosmetic), but in some
scenarios can resolve guest driver issues. Additionally, no
regressions in behavior have been reported for this change.
A caveat here is that the PCIe spec requires for compatibility that
devices report support for a size in the range of 1MB to 512GB,
therefore if the current BAR size falls outside that range we revert
to hiding the capability.
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/r/20230505232308.2869912-1-alex.williamson@redhat.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Currently, VFIO log_sync can be issued while migration is in SETUP
state. However, doing this log_sync is at best redundant and at worst
can fail.
Redundant -- all RAM is marked dirty in migration SETUP state and is
transferred only after migration is set to ACTIVE state, so doing
log_sync during migration SETUP is pointless.
Can fail -- there is a time window, between setting migration state to
SETUP and starting dirty tracking by RAM save_live_setup handler, during
which dirty tracking is still not started. Any VFIO log_sync call that
is issued during this time window will fail. For example, this error can
be triggered by migrating a VM when a GUI is active, which constantly
calls log_sync.
Fix it by skipping VFIO log_sync while migration is in SETUP state.
Fixes: 758b96b61d ("vfio/migrate: Move switch of dirty tracking into vfio_memory_listener")
Signed-off-by: Avihai Horon <avihaih@nvidia.com>
Link: https://lore.kernel.org/r/20230403130000.6422-1-avihaih@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
The calling function is already working with hwaddr and uint64_t so
lets avoid bringing target_ulong in if we don't need to.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20230404132711.2563638-1-alex.bennee@linaro.org>
Signed-off-by: Song Gao <gaosong@loongson.cn>
When building QEMU with "--without-default-devices", the pseries
machine fails to start even when running with the --nodefaults option:
$ ./qemu-system-ppc64 --nodefaults -M pseries
Type 'spapr-nvdimm' is missing its parent 'nvdimm'
Aborted (core dumped)
Looks like NVDIMM is a hard requirement for this machine nowadays.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20230504180521.220404-1-thuth@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The bits in cr reg are grouped into eight 4-bit fields represented
by env->crf[8] and the related calculations should be abstracted to
keep the calling routines simpler to read. This is a step towards
cleaning up the related/calling code for better readability.
Signed-off-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230503093619.2530487-2-harshpb@linux.ibm.com>
[danielhb: add 'const' modifier to fix linux-user build]
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
As Coverity points out (CID 1508621) the calculation to increment i in
the fill fallback loop is ineffective as it is overwritten in next
statement. This was left there by mistake from a previous version but
is not needed in the current approach so remove the superfluous
increment statement.
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230405161234.6EF0A74633D@zero.eik.bme.hu>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Since g_new is used to initialize the RISCVAPLICState->state structure,
in some case we get behavior that is not as expected. This patch
changes this to g_new0, which allows to initialize the APLIC in the correct state.
Signed-off-by: Ivan Klokov <ivan.klokov@syntacore.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Message-Id: <20230413133432.53771-1-ivan.klokov@syntacore.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Add signature and signature-granularity properties in spike to specify the target
signatrue file and the line size for signature data.
Recgonize the signature section between begin_signature and end_signature symbols
when loading elf of ACT tests. Then dump signature data in signature section just
before the ACT tests exit.
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230405095720.75848-2-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
In allwinner-sun8i-emac we just read directly from guest memory into
a host FrameDescriptor struct and back. This only works on
little-endian hosts. Reading and writing of descriptors is already
abstracted into functions; make those functions also handle the
byte-swapping so that TransferDescriptor structs as seen by the rest
of the code are always in host-order, and fix two places that were
doing ad-hoc descriptor reading without using the functions.
Cc: qemu-stable@nongnu.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20230424165053.1428857-3-peter.maydell@linaro.org
In allwinner_sdhost_process_desc() we just read directly from
guest memory into a host TransferDescriptor struct and back.
This only works on little-endian hosts. Abstract the reading
and writing of descriptors into functions that handle the
byte-swapping so that TransferDescriptor structs as seen by
the rest of the code are always in host-order.
This fixes a failure of one of the avocado tests on s390.
Cc: qemu-stable@nongnu.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20230424165053.1428857-2-peter.maydell@linaro.org
The Allwinner PIC model uses set_bit() and clear_bit() to update the
values in its irq_pending[] array when an interrupt arrives. However
it is using these functions wrongly: they work on an array of type
'long', and it is passing an array of type 'uint32_t'. Because the
code manually figures out the right array element, this works on
little-endian hosts and on 32-bit big-endian hosts, where bits 0..31
in a 'long' are in the same place as they are in a 'uint32_t'.
However it breaks on 64-bit big-endian hosts.
Remove the use of set_bit() and clear_bit() in favour of using
deposit32() on the array element. This fixes a bug where on
big-endian 64-bit hosts the guest kernel would hang early on in
bootup.
Cc: qemu-stable@nongnu.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20230424152833.1334136-1-peter.maydell@linaro.org
When writing the secondary-CPU stub boot loader code to the guest,
use arm_write_bootloader() instead of directly calling
rom_add_blob_fixed(). This fixes a bug on big-endian hosts, because
arm_write_bootloader() will correctly byte-swap the host-byte-order
array values into the guest-byte-order to write into the guest
memory.
Cc: qemu-stable@nongnu.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20230424152717.1333930-4-peter.maydell@linaro.org
When writing the secondary-CPU stub boot loader code to the guest,
use arm_write_bootloader() instead of directly calling
rom_add_blob_fixed(). This fixes a bug on big-endian hosts, because
arm_write_bootloader() will correctly byte-swap the host-byte-order
array values into the guest-byte-order to write into the guest
memory.
Cc: qemu-stable@nongnu.org
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Tested-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20230424152717.1333930-3-peter.maydell@linaro.org
[PMM: Moved the "make arm_write_bootloader() function public" part
to its own patch; updated commit message to note that this fixes
an actual bug; adjust to the API changes noted in previous commit]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The arm boot.c code includes a utility function write_bootloader()
which assists in writing a boot-code fragment into guest memory,
including handling endianness and fixing it up with entry point
addresses and similar things. This is useful not just for the boot.c
code but also in board model code, so rename it to
arm_write_bootloader() and make it globally visible.
Since we are making it public, make its API a little neater: move the
AddressSpace* argument to be next to the hwaddr argument, and allow
the fixupcontext array to be const, since we never modify it in this
function.
Cc: qemu-stable@nongnu.org
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Tested-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20230424152717.1333930-2-peter.maydell@linaro.org
[PMM: Split out from another patch by Cédric, added doc comment]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The msf2-emac ethernet controller has functions emac_load_desc() and
emac_store_desc() which read and write the in-memory descriptor
blocks and handle conversion between guest and host endianness.
As currently written, emac_store_desc() does the endianness
conversion in-place; this means that it effectively consumes the
input EmacDesc struct, because on a big-endian host the fields will
be overwritten with the little-endian versions of their values.
Unfortunately, in all the callsites the code continues to access
fields in the EmacDesc struct after it has called emac_store_desc()
-- specifically, it looks at the d.next field.
The effect of this is that on a big-endian host networking doesn't
work because the address of the next descriptor is corrupted.
We could fix this by making the callsite avoid using the struct; but
it's more robust to have emac_store_desc() leave its input alone.
(emac_load_desc() also does an in-place conversion, but here this is
fine, because the function is supposed to be initializing the
struct.)
Cc: qemu-stable@nongnu.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 20230424151919.1333299-1-peter.maydell@linaro.org
This query copies the kernel command line into the message buffer. It
was previously stubbed out to return empty, this commit makes it reflect
the arguments specified with `-append`.
I observed the following peculiarities on my Pi 3B+:
- If the buffer is shorter than the string, the response header gives
the full length, but no data is actually copied.
- No NUL terminator is added: even if the buffer is long enough to fit
one, the buffer's original contents are preserved past the string's
end.
- The VC firmware adds the following extra parameters beside the
user-supplied ones (via /boot/cmdline.txt): `video`, `vc_mem.mem_base`
and `vc_mem.mem_size`. This is currently not implemented in qemu.
Signed-off-by: Daniel Bertalan <dani@danielbertalan.dev>
Message-id: 20230425103250.56653-1-dani@danielbertalan.dev
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: added comment about NUL and short-buffer behaviour]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The MAC address set from Qemu wasn't being saved into the register space.
Reviewed-by: Hao Wu <wuhaotsh@google.com>
Signed-off-by: Patrick Venture <venture@google.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: moved variable declaration to top of function]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Move all the CONFIG_FOO=y from default.mak into "default y if TCG"
statements in Kconfig. That way they won't be selected when
CONFIG_TCG=n.
I'm leaving CONFIG_ARM_VIRT in default.mak because it allows us to
keep the two default.mak files not empty and keep aarch64-default.mak
including arm-default.mak. That way we don't surprise anyone that's
used to altering these files.
With this change we can start building with --disable-tcg.
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230426180013.14814-12-farosas@suse.de
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We are about to enable the build without TCG, so CONFIG_SEMIHOSTING
and CONFIG_ARM_COMPATIBLE_SEMIHOSTING cannot be unconditionally set in
default.mak anymore. So reflect the change in a Kconfig.
Instead of using semihosting/Kconfig, use a target-specific file, so
that the change doesn't affect other architectures which might
implement semihosting in a way compatible with KVM.
The selection from ARM_v7M needs to be removed to avoid a cycle during
parsing.
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230426180013.14814-11-farosas@suse.de
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
move the module containing cpu models definitions
for 32bit TCG-only CPUs to tcg/ and rename it for clarity.
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20230426180013.14814-8-farosas@suse.de
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Move the 64-bit CPUs that are TCG-only:
- cortex-a35
- cortex-a55
- cortex-a72
- cortex-a76
- a64fx
- neoverse-n1
Keep the CPUs that can be used with KVM:
- cortex-a57
- cortex-a53
- max
- host
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20230426180013.14814-6-farosas@suse.de
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
As the code is designed for re-entrant calls to apic-msi, mark apic-msi
as reentrancy-safe.
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Message-Id: <20230427211013.2994127-9-alxndr@bu.edu>
Signed-off-by: Thomas Huth <thuth@redhat.com>
As the code is designed for re-entrant calls from raven_io_ops to
pci-conf, mark raven_io_ops as reentrancy-safe.
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Message-Id: <20230427211013.2994127-8-alxndr@bu.edu>
Signed-off-by: Thomas Huth <thuth@redhat.com>
As the code is designed for re-entrant calls from bcm2835_property to
bcm2835_mbox and back into bcm2835_property, mark iomem as
reentrancy-safe.
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230427211013.2994127-7-alxndr@bu.edu>
Signed-off-by: Thomas Huth <thuth@redhat.com>
As the code is designed to use the memory APIs to access the script ram,
disable reentrancy checks for the pseudo-RAM ram_io MemoryRegion.
In the future, ram_io may be converted from an IO to a proper RAM MemoryRegion.
Reported-by: Fiona Ebner <f.ebner@proxmox.com>
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Message-Id: <20230427211013.2994127-6-alxndr@bu.edu>
Signed-off-by: Thomas Huth <thuth@redhat.com>
