Commit Graph

2069 Commits

Author SHA1 Message Date
Paolo Bonzini
3e7e180ab3 scsi-block, scsi-generic: implement parse_cdb
The callback lets the bus provide the direction and transfer count
for passthrough commands, enabling passthrough of vendor-specific
commands.

Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-07-29 17:36:33 +02:00
Paolo Bonzini
ff34c32ccc scsi-bus: introduce parse_cdb in SCSIDeviceClass and SCSIBusInfo
These callbacks will let devices do their own request parsing, or
defer it to the bus.  If the bus does not provide an implementation,
in turn, fall back to the default parsing routine.

Swap the first two arguments to scsi_req_parse, and rename it to
scsi_req_parse_cdb, for consistency.

Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-07-29 17:36:25 +02:00
Paolo Bonzini
07fb61760c pc: hack for migration compatibility from QEMU 2.0
Changing the ACPI table size causes migration to break, and the memory
hotplug work opened our eyes on how horribly we were breaking things in
2.0 already.

The ACPI table size is rounded to the next 4k, which one would think
gives some headroom.  In practice this is not the case, because the user
can control the ACPI table size (each CPU adds 97 bytes to the SSDT and
8 to the MADT) and so some "-smp" values will break the 4k boundary and
fail to migrate.  Similarly, PCI bridges add ~1870 bytes to the SSDT.

This patch concerns itself with fixing migration from QEMU 2.0.  It
computes the payload size of QEMU 2.0 and always uses that one.
The previous patch shrunk the ACPI tables enough that the QEMU 2.0 size
should always be enough; non-AML tables can change depending on the
configuration (especially MADT, SRAT, HPET) but they remain the same
between QEMU 2.0 and 2.1, so we only compute our padding based on the
sizes of the SSDT and DSDT.

Migration from QEMU 1.7 should work for guests that have a number of CPUs
other than 12, 13, 14, 54, 55, 56, 97, 98, 139, 140.  It was already
broken from QEMU 1.7 to QEMU 2.0 in the same way, though.

Even with this patch, QEMU 1.7 and 2.0 have two different ideas of
"-M pc-i440fx-2.0" when there are PCI bridges.  Igor sent a patch to
adopt the QEMU 1.7 definition.  I think distributions should apply
it if they move directly from QEMU 1.7 to 2.1+ without ever packaging
version 2.0.

Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-07-28 23:02:39 +02:00
Peter Maydell
25af8e6b61 One of the two pending migration fix, and a small KVM patch.
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABAgAGBQJTzkG6AAoJEBvWZb6bTYbySkYP/R9ku5J4sqO1WokbjGwy8eH6
 y/oFnrhMnbBaGZ/vIQB8DvDQygPJUPHGnHl6oMH8q9yfBChCb7+j0GoBU+PSMC8p
 FgqMTGdJ/m3FDlEcsLnDuJYqcKiI3Ip+U+oTCl1m4AtVCogBkgARF6R6n+H0n5W7
 rQclDK/VKHOB1z9eePCNtr64NipEJlpzeGmyXLB/su6jlzTESlxC6G4Xns3ARVkb
 +t7s/hjqP4LK0imhlGlLCjnjoMb+HsVO4O4A08L/alKVFPpyxptYYuWVQzu/PX8J
 P8kEQSDeK+F8mRkwhrioeRrhKGFv06KWwTFAxgb+Mpo2avUlft/yfTuzoeQl/Ozx
 VFLrpjxThB+PE3Sq/kK1euHPB+alnibQLtKjNrC5jbTwzGPZwxRLo/N2yjGSfO77
 xeOGwMRSzZuhbhIRcYug2JRmpVVrhdyMIoG5SsbDnKj7JUsGwb9AN1GG7Pd+g2B5
 CfJlkCZ3fLekmq2BUDXLHGysXabZgkZb9uEplCKe8XBSW3tktmcfcPsEaKGtfz9S
 /mgriwu+vLoc3iIvsyPuE2uHJFpb+0J7NbJIjt97b6WyxcCyXlZ/fN22yf43q0M7
 iDmd+fOBYkG7yEQ5g3PEGWB6jFbIt2LGV9n+pFZ2xBqgTHDDsnsfnsuNkXwbXLly
 H/K9mI5RbPbajTrlXA6G
 =5T9q
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging

One of the two pending migration fix, and a small KVM patch.

# gpg: Signature made Tue 22 Jul 2014 11:49:30 BST using RSA key ID 9B4D86F2
# gpg: Can't check signature: public key not found

* remotes/bonzini/tags/for-upstream:
  kvm-all: Use 'tmpcpu' instead of 'cpu' in sub-looping to avoid 'cpu' be NULL
  exec: fix migration with devices that use address_space_rw

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-07-22 12:03:45 +01:00
Paolo Bonzini
6886867e98 exec: fix migration with devices that use address_space_rw
Devices that use address_space_rw to write large areas to memory
(as opposed to address_space_map/unmap) were broken with respect
to migration since fe680d0 (exec: Limit translation limiting in
address_space_translate to xen, 2014-05-07).  Such devices include
IDE CD-ROMs.

The reason is that invalidate_and_set_dirty (called by address_space_rw
but not address_space_map/unmap) was only setting the dirty bit for
the first page in the translation.

To fix this, introduce cpu_physical_memory_set_dirty_range_nocode that
is the same as cpu_physical_memory_set_dirty_range except it does not
muck with the DIRTY_MEMORY_CODE bitmap.  This function can be used if
the caller invalidates translations with tb_invalidate_phys_page_range.

There is another difference between cpu_physical_memory_set_dirty_range
and cpu_physical_memory_set_dirty_flag; the former includes a call
to xen_modified_memory.  This is handled separately in
invalidate_and_set_dirty, and is not needed in other callers of
cpu_physical_memory_set_dirty_range_nocode, so leave it alone.

Just one nit: now that invalidate_and_set_dirty takes care of handling
multiple pages, there is no need for address_space_unmap to wrap it
in a loop.  In fact that loop would now be O(n^2).

Reported-by: Dave Gilbert <dgilbert@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-07-22 10:38:50 +02:00
Peter Maydell
147fc41973 trivial patches for 2014-07-18
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQEcBAABAgAGBQJTySl7AAoJEL7lnXSkw9fbXvIH/3RUtN6m1rjYjnZOdmFQmSE9
 YkD+IviRH336whytrsaGCh+UVB8VwBR8FXz7QK/+N2WjFiK2jDKjQ8VirJkbdcDJ
 O6nJw9jSoYRksPslpQTQV3bqNqSny6KDIDGvEJZ7iwhxCcUxhV5v/O5LTd3iy9L0
 t0KTuGIOnPE7GtzsT01RLaMe34BUlac5QpN7jqY6uBbH+1JpAIE5xl36+6rQyT0y
 RHkhbEW3wHju5usTJojioA+S7sUJfRdzoJZZY9f1FgM4lZXQGsnKeYoDt+PEpunW
 0fFXCRJfKrFfHgNCJ0zWDwJDlq55lpDoyp5OBW0gD71Zo0xv3DMtCFlKDUiKth0=
 =RCw3
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/mjt/tags/trivial-patches-2014-07-18' into staging

trivial patches for 2014-07-18

# gpg: Signature made Fri 18 Jul 2014 15:04:43 BST using RSA key ID A4C3D7DB
# gpg: Good signature from "Michael Tokarev <mjt@tls.msk.ru>"
# gpg:                 aka "Michael Tokarev <mjt@corpit.ru>"
# gpg:                 aka "Michael Tokarev <mjt@debian.org>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 6EE1 95D1 886E 8FFB 810D  4324 457C E0A0 8044 65C5
#      Subkey fingerprint: 6F67 E18E 7C91 C5B1 5514  66A7 BEE5 9D74 A4C3 D7DB

* remotes/mjt/tags/trivial-patches-2014-07-18:
  tests: Add missing 'static' attributes (fix warnings from smatch)
  migration: Add missing 'static' attribute
  qga: Add missing 'static' attribute
  hw/usb: Add missing 'static' attribute
  doc: slirp supports ICMP echo if enabled in Linux
  qemu-img: Remove redundancy "ret = -1"
  Fix new typos in comments (found by codespell)
  slirp: Give error message if hostfwd_add/remove for unrecognized vlan/stack

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-07-18 16:59:29 +01:00
Stefan Weil
a9dd38db68 Fix new typos in comments (found by codespell)
arbitary -> arbitrary
basicly -> basically

Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2014-07-18 17:45:36 +04:00
Kevin Wolf
3baca89139 block: Add Error argument to bdrv_refresh_limits()
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-07-18 13:18:43 +01:00
Peter Maydell
0a9934eef1 Misc 2.1 fixes regarding character/serial devices and SCSI.
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABAgAGBQJTw/aQAAoJEBvWZb6bTYbyQFkQAJ1/P6aG5EOd8dBQ2rNZ72Zp
 tWLnCQNZFIRLu1PGwiiqKihRk3N+YSMh0xERe1H8ZPwv1xIpia5zfcZ+fwEizyb2
 62zaTSSbUssWvt/p/mnb8K4H3HhBnEfEcQsFJi9GiML8G7rFwq5pUYTPfu0DQkq0
 +j1sk/sfzaKfdzDuxpz1cxPkFw7BjDTPDJPsKJCSok25sS7EhfN00auc33r8427k
 k5p/1xz7K/edUhZ86XhCIOs5bHIGxEnpK4bjV5F4MXCMC5vgp1VFFrK8GRG7rncO
 rB0rYCzpgxLA8DYpSGOIl6VNfZfHfvtrAdPbQwPfh1FzEya2PL/WorfwFcibKU3V
 3aa07rVOunIxVsCET49Q36RnSCX9COKww9BJxcsLu7C/G8id4tu67OS0/FMI/EaJ
 1oy7miUJuWhZEA115zyBfWBrv88PgNdlYVP8NtekBoHaL5m+Tk6ZAVmmxz5AxDZs
 zXrzUgotQ+cQZdeHJ/UVvjk4J1RUsolOEIwASgxBFph4fwAT/kRtlkZCpX/2xfDA
 VSTxKqoiQkdepQzBcNBOJvhQ38kU5qQ3AZb871T+y4WwP6jKj8kqZ7yiFf6yYz4a
 AqzSpichWVan99HuTLfiexHyq4r2D75To6ZQFVduYhQg8YX5byDcjtiQRFyy1uKv
 FwkEa/mpZdB1p0fSc7i3
 =8zIe
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging

Misc 2.1 fixes regarding character/serial devices and SCSI.

# gpg: Signature made Mon 14 Jul 2014 16:26:08 BST using RSA key ID 9B4D86F2
# gpg: Can't check signature: public key not found

* remotes/bonzini/tags/for-upstream:
  serial-pci: remove memory regions from BAR before destroying them
  virtio-scsi: fix with -M pc-i440fx-2.0
  serial: change retry logic to avoid concurrency
  qemu-char: fix deadlock with "-monitor pty"
  scsi: Report error when lun number is in use

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-07-14 17:01:45 +01:00
Paolo Bonzini
1f4e6a069b virtio-scsi: fix with -M pc-i440fx-2.0
Right now starting a machine with virtio-scsi and a <= 2.0 machine type
fails with:

    qemu-system-x86_64: -device virtio-scsi-pci: Property .any_layout not found

This is because the any_layout bit was actually never set after
virtio-scsi was changed to support arbitrary layout for virtio buffers.

(This was just a cleanup and a preparation for virtio 1.0; no guest
actually checks the bit, but the new request parsing algorithms are
tested even with old guest).

Reported-by: David Gilbert <dgilbert@redhat.com>
Reviewed-by: David Gilbert <dgilbert@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-07-14 16:14:15 +02:00
Kevin Wolf
58f423fbd5 dma-helpers: Fix too long qiov
If the size of the scatter/gather list isn't a multiple of 512, the
number of sectors for the block layer request is rounded down, resulting
in a qiov that doesn't match the request length. Truncate the qiov to the
new length of the request.

This fixes the IDE qtest case /x86_64/ide/bmdma/short_prdt.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
2014-07-14 12:03:21 +02:00
Paolo Bonzini
acfb23ad3d AioContext: do not rely on aio_poll(ctx, true) result to end a loop
Currently, whenever aio_poll(ctx, true) has completed all pending
work it returns true *and* the next call to aio_poll(ctx, true)
will not block.

This invariant has its roots in qemu_aio_flush()'s implementation
as "while (qemu_aio_wait()) {}".  However, qemu_aio_flush() does
not exist anymore and bdrv_drain_all() is implemented differently;
and this invariant is complicated to maintain and subtly different
from the return value of GMainLoop's g_main_context_iteration.

All calls to aio_poll(ctx, true) except one are guarded by a
while() loop checking for a request to be incomplete, or a
BlockDriverState to be idle.  The one remaining call (in
iothread.c) uses this to delay the aio_context_release/acquire
pair until the AioContext is quiescent, however:

- we can do the same just by using non-blocking aio_poll,
  similar to how vl.c invokes main_loop_wait

- it is buggy, because it does not ensure that the AioContext
  is released between an aio_notify and the next time the
  iothread goes to sleep.  This leads to hangs when stopping
  the dataplane thread.

In the end, these semantics are a bad match for the current
users of AioContext.  So modify that one exception in iothread.c,
which also fixes the hangs, as well as the testcase so that
it use the same idiom as the actual QEMU code.

Reported-by: Christian Borntraeger <borntraeger@de.ibm.com>
Tested-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-07-14 12:03:20 +02:00
Stefan Hajnoczi
f897bf751f virtio-blk: embed VirtQueueElement in VirtIOBlockReq
The memory allocation between hw/block/virtio-blk.c,
hw/block/dataplane/virtio-blk.c, and hw/virtio/dataplane/vring.c is
messy.  Structs are allocated in different files than they are freed in.
This is risky and makes memory leaks easier.

Embed VirtQueueElement in VirtIOBlockReq to reduce the amount of memory
allocation we need to juggle.  This also makes vring.c and virtio.c
slightly more similar.

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-07-14 12:03:20 +02:00
Stefan Hajnoczi
abd764250f dataplane: do not free VirtQueueElement in vring_push()
VirtQueueElement is allocated in vring_pop() so it seems to make sense
that vring_push() should free it.  Alas, virtio-blk frees
VirtQueueElement itself in virtio_blk_free_request().

This patch solves a double-free assertion in glib's g_slice_free().

Rename vring_free_element() to vring_unmap_element() since it no longer
frees the VirtQueueElement.

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Tested-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-07-14 12:03:20 +02:00
Paolo Bonzini
0ceb849bd3 AioContext: speed up aio_notify
In many cases, the call to event_notifier_set in aio_notify is unnecessary.
In particular, if we are executing aio_dispatch, or if aio_poll is not
blocking, we know that we will soon get to the next loop iteration (if
necessary); the thread that hosts the AioContext's event loop does not
need any nudging.

The patch includes a Promela formal model that shows that this really
works and does not need any further complication such as generation
counts.  It needs a memory barrier though.

The generation counts are not needed because any change to
ctx->dispatching after the memory barrier is okay for aio_notify.
If it changes from zero to one, it is the right thing to skip
event_notifier_set.  If it changes from one to zero, the
event_notifier_set is unnecessary but harmless.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-07-09 15:50:11 +02:00
Paolo Bonzini
87f68d3182 block: drop aio functions that operate on the main AioContext
The main AioContext should be accessed explicitly via qemu_get_aio_context().
Most of the time, using it is not the right thing to do.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-07-09 15:50:11 +02:00
Peter Maydell
c6ea9b73b1 pc,vhost,virtio fixes, test
Bugfixes all over the place.
 
 There's a  non bugfix here: re-enabling the vhost-user test,
 though the patch just brings back functionality that
 I disabled earlier to fix mingw build failures.
 This is now sorted, and keeping the unit test enabled
 seems important since the feature relies on an external
 server to work, so isn't easy to test.
 
 Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJTuR5/AAoJECgfDbjSjVRpndMH/jSflurLWJwEQKLg8bAu/W55
 rh/7TqFr1GVqdNBbXs1foaSTBUvy74EXEumqpNV8Fu7Jnvt8vePTLBORUMs0OY47
 gMi1i/heVkjMIfobzobVxGvStHtg75tmslsrhrJLUCGbfkah88IWNBjJZEkx4gFY
 zO2AVw23ER0R4hPxXxP56sUceZBRzUoLR84WYcOS9xRoBIe/m2FKndWBUIzB9YU+
 sBRj+t3ZT8w5/tPcYQrK2klWYceIb/u540vAwT32dAn/BiN/eAlkMQUSw/ohp8ol
 1H6d6obiXl4HuS8QwPwfYo7uHX82nc3T6n+wAC34+C1Zk6oJYiwwgkKiMHiOw50=
 =udKK
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging

pc,vhost,virtio fixes, test

Bugfixes all over the place.

There's a  non bugfix here: re-enabling the vhost-user test,
though the patch just brings back functionality that
I disabled earlier to fix mingw build failures.
This is now sorted, and keeping the unit test enabled
seems important since the feature relies on an external
server to work, so isn't easy to test.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

# gpg: Signature made Sun 06 Jul 2014 11:01:35 BST using RSA key ID D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg:                 aka "Michael S. Tsirkin <mst@redhat.com>"

* remotes/mst/tags/for_upstream:
  qemu-char: add chr_add_watch support in mux chardev
  virtio-pci: fix MSI memory region use after free
  qdev: Fix crash when using non-device class name on -global
  qdev: Don't abort() in case globals can't be set
  hw/virtio: enable common virtio feature for mmio device
  acpi: fix typo in memory hotplug MMIO region name
  pci: assign devfn to pci_dev before calling pci_device_iommu_address_space()
  Handle G_IO_HUP in tcp_chr_read for tcp chardev
  virtio: move common virtio properties to bus class device
  pc-dimm: error out if memory hotplug is not enabled
  numa: check for busy memory backend
  qtest: enable vhost-user-test

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-07-07 16:30:14 +01:00
Peter Maydell
9540d1f8d9 Block pull request
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJTupIoAAoJEJykq7OBq3PIwWMIAJQ91tz0Rs29maKfU08hXL47
 2lOOtU53Y8q65ZRCa4x/9RVybXsemrGiIm4vB5zztOOXQiLjYsUYOBPV9FzN3cgX
 /gZQXWCRQ0TpISoLOmACn4KlW8A90acULYYaJ7B3N7x4SgaRd+Np+O/IhdgA++mo
 tQ+/uTBGpbQXH5xSK8H+4+AwvVRgDbLhGqy6ZmZmyE/KqqYNf6Y7Y04n0lLGzV6c
 UrI4K57sTYyOQJY4XCAPTwIvEdQ10usGyRcEQPvdP7zkBIz5TKkPUtKUAPuFJhij
 hO+bF+nRgS/4gQr2teY9DLIiEZEhs7hgQnW1O7ByZlBBH/spmh19Mh0G6PUpB2w=
 =fF3v
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/stefanha/tags/block-pull-request' into staging

Block pull request

# gpg: Signature made Mon 07 Jul 2014 13:27:20 BST using RSA key ID 81AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>"
# gpg:                 aka "Stefan Hajnoczi <stefanha@gmail.com>"

* remotes/stefanha/tags/block-pull-request:
  qmp: show QOM properties in device-list-properties
  dataplane: submit I/O as a batch
  linux-aio: implement io plug, unplug and flush io queue
  block: block: introduce APIs for submitting IO as a batch
  ahci: map memory via device's address space instead of address_space_memory
  raw-posix: Fix raw_getlength() to always return -errno on error
  qemu-iotests: Disable Quorum testing in 041 when Quorum is not builtin
  ahci.c: mask unused flags when reading size PRDT DBC
  MAINTAINERS: add Stefan Hajnoczi to IDE maintainers
  mirror: Fix qiov size for short requests
  Fix nocow typos in manpage

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-07-07 15:02:36 +01:00
Stefano Stabellini
4aba9eb138 xen_backend: introduce xenstore_read_uint64 and xenstore_read_fe_uint64
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
2014-07-07 10:37:40 +00:00
Ming Lei
448ad91db4 block: block: introduce APIs for submitting IO as a batch
This patch introduces three APIs so that following
patches can support queuing I/O requests and submitting them
as a batch for improving I/O performance.

Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Ming Lei <ming.lei@canonical.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-07-07 11:05:17 +02:00
Kirill Batuzov
812c1057f6 Handle G_IO_HUP in tcp_chr_read for tcp chardev
Since commit cdaa86a54b
("Add G_IO_HUP handler for socket chardev")
GLib limitation results in a bug on Windows host. Steps to reproduce:

Start qemu: qemu-system-i386 -qmp tcp:127.0.0.1:4444:server:nowait
Connect with telnet: telnet 127.0.0.1 4444
Try sending some data from telnet.
Expected result: answers from QEMU.
Observed result: no answers (actually tcp_chr_read is not called at all).

Due to GLib limitations it is not possible to create several watches on one
channel on Windows hosts. See bug #338943 in GNOME bugzilla for details:
https://bugzilla.gnome.org/show_bug.cgi?id=338943

This reimplements commit cdaa86a54b
("Add G_IO_HUP handler for socket chardev") using a single watch:

Handle G_IO_HUP in tcp_chr_read instead. It is already watched by a
corresponding watch.  Remove the second watch with its handler.

Cc: Antonios Motakis <a.motakis@virtualopensystems.com>
Cc: Nikolay Nikolaev <n.nikolaev@virtualopensystems.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Kirill Batuzov <batuzovk@ispras.ru>
Signed-off-by: Nikita Belov <zodiac@ispras.ru>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-07-06 09:13:54 +03:00
Ming Lei
85d1277e66 virtio: move common virtio properties to bus class device
The two common virtio features can be defined per bus, so move all
into bus class device to make code more clean.

As discussed with cornelia, s390-virtio-blk doesn't support
the two features at all, so keep s390-virtio as it.

Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> #for s390 ccw
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Ming Lei <ming.lei@canonical.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

MST: rebase and resolve conflicts
2014-07-06 09:13:54 +03:00
Peter Maydell
8593efa4fb Block pull request
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJTsnWTAAoJEJykq7OBq3PIKXMH/0+fWDs4ZnAl32AVmHTYFNZS
 AJHkzdRCWAsq2E7jqoPficjZSy7oZMvgWN7t30SxljlhRVfilr+KXNHl0sxXFRAn
 rnjWIPBATcVYpHaPcjP85YTsJitjj08eUYVD2HgbtIarQyyUdhEG5l1voAI8oxkY
 7T92X+olbyI+NqdDUMvQUt0gdoptZPEnieCI5rScQQiwXKRv9uEJBYBSlTFJ5BTb
 6XOszj62Yk25W3Sq74yfvvecFhNIXAOlzXqD03DSKHos0pLIJhMxEeYZrKIacBqP
 HspYKFwOjRAflp3Pcv29m+6IjnL33IJJK6dou9Aou4UqsLRReDeeeiU1aX9ym2Q=
 =txun
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/stefanha/tags/block-pull-request' into staging

Block pull request

# gpg: Signature made Tue 01 Jul 2014 09:47:15 BST using RSA key ID 81AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>"
# gpg:                 aka "Stefan Hajnoczi <stefanha@gmail.com>"

* remotes/stefanha/tags/block-pull-request: (23 commits)
  block: add backing-file option to block-stream
  block: extend block-commit to accept a string for the backing file
  block: add helper function to determine if a BDS is in a chain
  block: add QAPI command to allow live backing file change
  qapi: Change back sector-count to sectors-count in quorum QAPI events.
  block/cow: Avoid use of uninitialized cow_bs in error path
  block: simplify bdrv_find_base() and bdrv_find_overlay()
  block: make 'top' argument to block-commit optional
  iotests: Add more tests to quick group
  iotests: Add qemu tests to quick group
  iotests: Simplify qemu-iotests-quick.sh
  qemu-img create: add 'nocow' option
  virtio-blk: remove need for explicit x-data-plane=on option
  qdev: drop iothread property type
  virtio-blk: replace x-iothread with iothread link property
  virtio-blk: move qdev properties into virtio-blk.c
  virtio: fix virtio-blk child refcount in transports
  virtio-blk: drop virtio_blk_set_conf()
  virtio-blk: use aliases instead of duplicate qdev properties
  qdev: add qdev_alias_all_properties()
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-07-01 13:13:04 +01:00
Peter Maydell
c26f3a0a6d Merge remote-tracking branch 'remotes/bonzini/memory' into staging
* remotes/bonzini/memory:
  qdev: correctly send DEVICE_DELETED for recursively-deleted devices
  memory: do not give a name to the internal exec.c regions
  memory: MemoryRegion: Add size property
  memory: MemoryRegion: Add may-overlap and priority props
  memory: MemoryRegion: Add container and addr props
  memory: MemoryRegion: replace owner field with QOM parent
  memory: MemoryRegion: QOMify
  memory: MemoryRegion: use /machine as default owner
  libqtest: escape strings in QMP commands, fix leak
  qom: object: Ignore refs/unrefs of NULL
  qom: object: remove parent pointer when unparenting
  mc146818rtc: add "rtc-time" link to "/machine/rtc"
  qom: allow creating an alias of a child<> property
  qom: add a generic mechanism to resolve paths
  qom: add object_property_add_alias()

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-07-01 11:55:49 +01:00
Jeff Cody
54e2690090 block: extend block-commit to accept a string for the backing file
On some image chains, QEMU may not always be able to resolve the
filenames properly, when updating the backing file of an image
after a block commit.

For instance, certain relative pathnames may fail, or drives may
have been specified originally by file descriptor (e.g. /dev/fd/???),
or a relative protocol pathname may have been used.

In these instances, QEMU may lack the information to be able to make
the correct choice, but the user or management layer most likely does
have that knowledge.

With this extension to the block-commit api, the user is able to change
the backing file of the overlay image as part of the block-commit
operation.

This allows the change to be 'safe', in the sense that if the attempt
to write the overlay image metadata fails, then the block-commit
operation returns failure, without disrupting the guest.

If the commit top is the active layer, then specifying the backing
file string will be treated as an error (there is no overlay image
to modify in that case).

If a backing file string is not specified in the command, the backing
file string to use is determined in the same manner as it was
previously.

Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-07-01 10:47:01 +02:00
Jeff Cody
5a6684d2b9 block: add helper function to determine if a BDS is in a chain
This is a small helper function, to determine if 'base' is in the
chain of BlockDriverState 'top'.  It returns true if it is in the chain,
and false otherwise.

If either argument is NULL, it will also return false.

Reviewed-by: Benoit Canet <benoit@irqsave.net>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-07-01 10:47:01 +02:00
Paolo Bonzini
352e8da743 qdev: correctly send DEVICE_DELETED for recursively-deleted devices
When a device is unparented (i.e. made completely hidden from management)
we want to send a DEVICE_DELETED event only if the device actually was
realized.  This avoids raising DEVICE_DELETED events when device_add
fails.

However, this does not work right for recursively-deleted
devices: the whole tree is _first_ unrealized, _then_ unparented.
Then device_unparent sees realized==false and fails to trigger
the event.  The solution is simply to move have_realized into
the DeviceState struct.  If device_add fails, we never set the
new field to true and DEVICE_DELETED is not sent.

Fixes qemu-iotests testcase 067 (broken by commit 5942a19, though that
commit in turn fixed a possible segfault in the same test).

Reported-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-07-01 10:20:42 +02:00
Peter Crosthwaite
d33382da9a memory: MemoryRegion: Add may-overlap and priority props
QOM propertyify the .may-overlap and .priority fields. The setters
will re-add the memory as a subregion if needed (i.e. the values change
when the memory region is already contained).

Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
[Remove setters. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-07-01 10:20:41 +02:00
Paolo Bonzini
22a893e4f5 memory: MemoryRegion: replace owner field with QOM parent
The two are now the same.

Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-07-01 10:20:41 +02:00
Peter Crosthwaite
b4fefef9d5 memory: MemoryRegion: QOMify
QOMify memory regions as an Object. The former init() and destroy()
routines become instance_init() and instance_finalize() resp.

memory_region_init() is re-implemented to be:
object_initialize() + set fields

memory_region_destroy() is re-implemented to call unparent().

Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
[Add newly-created MR as child, unparent on destruction. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-07-01 10:20:41 +02:00
Paolo Bonzini
64607d0881 qom: add a generic mechanism to resolve paths
It may be desirable to have custom link<> properties that do more
than just store an object.  Even the addition of a "check"
function is not enough if setting the link has side effects
or if a non-standard reference counting is preferrable.

Avoid the assumption that the opaque field of a link<> is a
LinkProperty struct, by adding a generic "resolve" callback
to ObjectProperty.  This fixes aliases of link properties.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-07-01 10:17:48 +02:00
Chunyan Liu
4ab1559085 qemu-img create: add 'nocow' option
Add 'nocow' option so that users could have a chance to set NOCOW flag to
newly created files. It's useful on btrfs file system to enhance performance.

Btrfs has low performance when hosting VM images, even more when the guest
in those VM are also using btrfs as file system. One way to mitigate this bad
performance is to turn off COW attributes on VM files. Generally, there are
two ways to turn off NOCOW on btrfs: a) by mounting fs with nodatacow, then
all newly created files will be NOCOW. b) per file. Add the NOCOW file
attribute. It could only be done to empty or new files.

This patch tries the second way, according to the option, it could add NOCOW
per file.

For most block drivers, since the create file step is in raw-posix.c, so we
can do setting NOCOW flag ioctl in raw-posix.c only.

But there are some exceptions, like block/vpc.c and block/vdi.c, they are
creating file by calling qemu_open directly. For them, do the same setting
NOCOW flag ioctl work in them separately.

[Fixed up 082.out due to the new 'nocow' creation option
--Stefan]

Signed-off-by: Chunyan Liu <cyliu@suse.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-07-01 10:15:12 +02:00
Stefan Hajnoczi
ef7c7ff6d4 qom: add object_property_add_alias()
Sometimes an object needs to present a property which is actually on
another object, or it needs to provide an alias name for an existing
property.

Examples:
  a.foo -> b.foo
  a.old_name -> a.new_name

The new object_property_add_alias() API allows objects to alias a
property on the same object or another object.  The source and target
names can be different.

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
2014-07-01 09:15:02 +02:00
Stefan Hajnoczi
1351d1ec89 qdev: drop iothread property type
The iothread property type is no longer used and can be removed.

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-07-01 09:15:02 +02:00
Stefan Hajnoczi
32a877e405 virtio-blk: move qdev properties into virtio-blk.c
There is no need to make DEFINE_VIRTIO_BLK_PROPERTIES() public.  Inline
it into virtio-blk.c so it cannot be used by mistake from other source
files.

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
2014-07-01 09:15:02 +02:00
Stefan Hajnoczi
f7fedda84a virtio-blk: drop virtio_blk_set_conf()
This function is no longer used since parent objects now use child
aliases to set the VirtIOBlkConf directly.

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
2014-07-01 09:15:02 +02:00
Stefan Hajnoczi
67cc7e0aac qdev: add qdev_alias_all_properties()
The qdev_alias_all_properties() function creates QOM alias properties
for each qdev property on a DeviceState.  This is useful for parent
objects that wish to forward property accesses to their children.

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
2014-07-01 09:15:02 +02:00
Stefan Hajnoczi
ee512c6f21 virtio-blk: move x-data-plane qdev property to virtio-blk.h
Move the x-data-plane property.  Originally it was outside since not
every transport may wish to support dataplane.  But that makes little
sense when we have a dedicated CONFIG_VIRTIO_BLK_DATA_PLANE ifdef
already.

This move makes it easier to switch to property aliases in the next
patch.

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
2014-07-01 09:15:02 +02:00
Stefan Hajnoczi
dc80ca6cd6 virtio-blk: avoid qdev property definition duplication
It becomes unwiedly to duplicate all virtio-blk qdev property
definitions due to an #ifdef.  The C preprocessor syntax makes it a
little hard to resolve this cleanly but we can extract the #ifdef and
call a macro it defines later.

Avoiding duplication is important since it will only get worse when we
move the x-data-plane qdev property here too.  We'd have a combinatorial
explosion since x-data-plane has its own #ifdef.

Suggested-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
2014-07-01 09:15:02 +02:00
Andreas Färber
615c489570 irq: Slim conversion of qemu_irq to QOM
As a prequel to any big Pin refactoring plans, do an in-place conversion
of qemu_irq to an Object, so that we can reference it in link<> properties.

Signed-off-by: Andreas Färber <afaerber@suse.de>
[ PC Changes:
 * Removed array-alloctor ref counting logic (limit changes just to
 * single IRQ allocator)
 * Removed WIP marking from subject line
]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
2014-07-01 04:12:48 +02:00
Peter Crosthwaite
f173d57a4c irq: Allocate IRQs individually
Allocate each IRQ individually on array allocations. This prepares for
QOMification of IRQs, where pointers to individual IRQs may be taken
and handed around for usage as QOM Links. The g_renew() scheme used here
is too fragile and would break all existing links should an IRQ list
be extended.

We now have to pass the IRQ count to qemu_free_irqs(). We have so few
call sites however, so this change is reasonably trivial.

Cc: agarcia@igalia.com
Cc: mst@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Alberto Garcia <agarcia@igalia.com>
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
2014-07-01 04:02:53 +02:00
Peter Maydell
8954000b9e Merge remote-tracking branch 'remotes/bonzini/nbd-next' into staging
* remotes/bonzini/nbd-next:
  nbd: Handle NBD_OPT_LIST option.
  nbd: Handle fixed new-style clients.
  nbd: Shutdown socket before closing.
  nbd: Don't validate from and len in NBD_CMD_DISC.
  nbd: Don't export a block device with no medium.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-06-30 16:13:32 +01:00
Hani Benhabiles
32d7d2e068 nbd: Handle NBD_OPT_LIST option.
Signed-off-by: Hani Benhabiles <kroosec@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-06-30 12:50:17 +02:00
Hani Benhabiles
f5076b5a75 nbd: Handle fixed new-style clients.
When this flag is set, the server tells the client that it can send another
option if the server received a request with an option that it doesn't
understand instead of directly closing the connection.

Also add link to the most up-to-date documentation.

Signed-off-by: Hani Benhabiles <kroosec@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-06-30 12:50:17 +02:00
Greg Kurz
0f5d1d2a49 virtio: memory accessors for endian-ambivalent targets
This is the virtio-access.h header file taken from Rusty's "endian-ambivalent
targets using legacy virtio" patch. It introduces helpers that should be used
when accessing vring data or by drivers for data that contains headers.
The virtio config space is also target endian, but the current code already
handles that with the virtio_is_big_endian() helper. There is no obvious
benefit at using the virtio accessors in this case.

Now we have two distinct paths: a fast inline one for fixed endian targets,
and a slow out-of-line one for targets that define the new TARGET_IS_BIENDIAN
macro.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
[ relicensed virtio-access.h to GPLv2+ on Rusty's request,
  pass &address_space_memory to physical memory accessors,
  per-device endianness,
  virtio tswap16 and tswap64 helpers,
  faspath for fixed endian targets,
  Greg Kurz <gkurz@linux.vnet.ibm.com> ]
Cc: Cédric Le Goater <clg@fr.ibm.com>
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Reviewed-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-29 19:39:42 +03:00
Greg Kurz
616a655219 virtio: add endian-ambivalent support to VirtIODevice
Some CPU families can dynamically change their endianness. This means we
can have little endian ppc or big endian arm guests for example. This has
an impact on legacy virtio data structures since they are target endian.
We hence introduce a new property to track the endianness of each virtio
device. It is reasonnably assumed that endianness won't change while the
device is in use : we hence capture the device endianness when it gets
reset.

We migrate this property in a subsection, after the device descriptor. This
means the load code must not rely on it until it is restored. As a consequence,
the vring sanity checks had to be moved after the call to vmstate_load_state().
We enforce paranoia by poisoning the property at the begining of virtio_load().

Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-29 19:39:42 +03:00
Greg Kurz
bf7663c4bd cpu: introduce CPUClass::virtio_is_big_endian()
If we want to support targets that can change endianness (modern PPC and
ARM for the moment), we need to add a per-CPU class method to be called
from the virtio code. The virtio_ prefix in the name is a hint for people
to avoid misusage (aka. anywhere but from the virtio code).

The default behaviour is to return the compile-time default target
endianness.

Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-29 19:39:42 +03:00
Greg Kurz
98ed8ecfc9 exec: introduce target_words_bigendian() helper
We currently have a virtio_is_big_endian() helper that provides the target
endianness to the virtio code. As of today, the helper returns a fixed
compile-time value. Of course, this will have to change if we want to
support target endianness changes at run-time.

Let's move the TARGET_WORDS_BIGENDIAN bits out to a new helper and have
virtio_is_big_endian() implemented on top of it.

This patch doesn't change any functionality.

Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-29 19:39:42 +03:00
Greg Kurz
1b5fc0dea4 virtio: introduce device specific migration calls
In order to migrate virtio subsections, they should be streamed after
the device itself. We need the device specific code to be called from
the common migration code to achieve this. This patch introduces load
and save methods for this purpose.

Suggested-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Reviewed-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-29 19:39:41 +03:00
Damjan Marion
3fd74b8407 vhost-user: fix regions provied with VHOST_USER_SET_MEM_TABLE message
Old code was affected by memory gaps which resulted in buffer pointers
pointing to address outside of the mapped regions.

Here we are introducing following changes:
 - new function qemu_get_ram_block_host_ptr() returns host pointer
   to the ram block, it is needed to calculate offset of specific
   region in the host memory
 - new field mmap_offset is added to the VhostUserMemoryRegion. It
   contains offset where specific region starts in the mapped memory.
   As there is stil no wider adoption of vhost-user agreement was made
   that we will not bump version number due to this change
 - other fileds in VhostUserMemoryRegion struct are not changed, as
   they are all needed for usermode app implementation
 - region data is not taken from ram_list.blocks anymore, instead we
   use region data which is alredy calculated for use in vhost-net
 - Now multiple regions can have same FD and user applicaton can call
   mmap() multiple times with the same FD but with different offset
   (user needs to take care for offset page alignment)

Signed-off-by: Damjan Marion <damarion@cisco.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Damjan Marion <damarion@cisco.com>
2014-06-29 19:39:40 +03:00
Eduardo Habkost
1af878e049 numa: Keep track of NUMA nodes present on the command-line
Based on "enable sparse node numbering" patch from Nishanth Aravamudan,
but without the code to actually support sparse node IDs. This just adds
the code to keep track of present/non-present nodes on the command-line,
without changing any behavior.

Signed-off-by: Nishanth Aravamudan <nacc@linux.vnet.ibm.com>
[Rename max_numa_node to max_numa_nodeid -Eduardo]
[Initialize max_numa_nodeid to 0 -Eduardo]
[Use MAX() macro when setting max_numa_nodeid -Eduardo]
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Hu Tao <hutao@cn.fujitsu.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
2014-06-29 18:59:41 +03:00
Eduardo Habkost
fa118d1f8b pc: Fix "prog_if" typo on PC_COMPAT_2_0
The property name is "prog_if", not "prof_if".

Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reported-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-29 18:59:07 +03:00
Eduardo Habkost
b8f5cfd682 pc: Move q35 compat props to PC_COMPAT_*
For each compat property on PC_Q35_COMPAT_*, there are only two
possibilities:

 * If the device is never instantiated when using a machine other than
   pc-q35, then the compat property can be safely added to
   PC_COMPAT_*;
 * If the device can be instantiated when using a machine other than
   pc-q35, that means the other machines also need the compat property
   to be set.

That means we don't need separate PC_Q35_COMPAT_* macros at all, today.

The hpet.hpet-intcap case is interesting: piix and q35 do have something
that emulates different defaults, but the machine-specific default is
applied _after_ compat_props are applied, by simply checking if the
property is zero (which is the real default on the hpet code).

The hpet.hpet-intcap=0x4 compat property can (should?) be applied to
piix too, because 0x4 was the default on both piix and q35 before the
hpet-intcap property was introduced.

Now, if one day we change the default HPET intcap on one of the PC
machine-types again, we may want to introduce PC_{Q35,I440FX}_COMPAT
macros. But while we don't need that, we can keep the code simple.

Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Cc: Liu Ping Fan <pingfank@linux.vnet.ibm.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-29 18:59:06 +03:00
Peter Maydell
2d40fa6987 Block patches for 2.1.0-rc0
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABAgAGBQJTrbz4AAoJEH8JsnLIjy/WlIkP/RepIwS29f19i3B/idGzUdYW
 9XJnVowRvpkUzDqUprrr7lPHMW/CwAswLNis9B1hZ59rx+tx4Hm/rZGARlqhSOSO
 ZMdW32GFW0SyC5PglFBwGQAk4U0FxwW5cJD6US7h3L4pACIdCkzFSNxehyfCMyU/
 oJkjuAH4a2IQoQf/M7WMm5kPkrdpRp6ZgbQvJGHaR63cuulZDb7rbHMyG66MWH8P
 wahhFFPY1wOeMBiISxPbmcTus+AlfCffG5qPqq83OtaIuWzINTmWlpiFmtx+Aqwy
 HSvGnFJ4Rf7J6Fw8sdTsABdqUTc/gxDYmhAuftm/hsjD9MvPeuFSLPMPLfGg6aPR
 umKaeBOw8NoMTPgbxg403gxFTrHar+TidBu8KgZw5T189/oJSSpT2J53uHWazmd9
 8USkcYQ7VHdFUQVXluLEzHMIWc7kf87ylQ8c9S1yCkNeWYxRZDZGgHEU49ov7FFU
 FnA0w+ZFyDkU8d5gryG+vxOeBDlmXD4UHa676gGlaYhs7YC/BY/JaMgqY4Fd6MMW
 dS5ibPjdtbxEZTh29eWEByMWpzuitr+iPPzsJEdC29LeIIj3XRQq/4FyiQ6EMAAO
 iOlcqE3tws0Ty8GEp78xsAYjaLuH3zmvOTa4aHUQ+K9kwpMPFSJKEcLkwPWWYRbs
 qR2ZL6M+95oQTYkYzv8i
 =Wwqx
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging

Block patches for 2.1.0-rc0

# gpg: Signature made Fri 27 Jun 2014 19:50:32 BST using RSA key ID C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>"

* remotes/kevin/tags/for-upstream: (47 commits)
  iotests: Fix 083 for out-of-tree builds
  iotests: Drop Python version from 065's Shebang
  iotests: Use $PYTHON for Python scripts
  iotests: Source common.env
  configure: Enable out-of-tree iotests
  iotests: Allow out-of-tree run
  block.c: Don't return success for bdrv_append_temp_snapshot() failure
  qemu-iotests: Add TestRepairQuorum to 041 to test drive-mirror node-name mode.
  block: Add replaces argument to drive-mirror
  blockjob: Fix recent BLOCK_JOB_ERROR regression
  blockjob: Fix recent BLOCK_JOB_READY regression
  virtio-blk: Rename complete_request_early to complete_request_vring
  virtio-blk: Unify {non-,}dataplane's request handlings
  virtio-blk: Schedule BH in the right context
  virtio-blk: Export request handling functions to dataplane
  virtio-blk: Make request completion function virtual
  block: acquire AioContext in qmp_query_blockstats()
  block: make bdrv_query_stats() static
  virtio-blk: Fix and clean up the in_sg and out_sg check
  virtio-blk: Fill in VirtIOBlockReq.out in dataplane code
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-06-29 15:24:54 +01:00
Peter Maydell
ac8076ac86 Merge remote-tracking branch 'remotes/qmp-unstable/queue/qmp' into staging
* remotes/qmp-unstable/queue/qmp:
  docs/qmp: Fix documentation of BLOCK_JOB_READY to match code
  char: report frontend open/closed state in 'query-chardev'
  virtio-serial: report frontend connection state via monitor
  qmp: add qmp-events.txt back
  qapi event: clean up in callers
  qapi script: clean up in scripts
  qapi: ignore generated event files
  qapi: move event defines

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-06-29 13:39:04 +01:00
Peter Maydell
76fbbec931 Net patches
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJTrW1hAAoJEJykq7OBq3PIvn4H/14/NCrBOFusbZdVYhBMAVgE
 1SZHoLItrW7Mo0R5mv9F/4RjGOWlRsFDPuHBN6Oc2j2vJFkdBGCYVqCVTID8BZIl
 BwBZ7E9qoN1oZZ4qMFmE6T3xLSNDyQ7Xta899hq5TYaC06v3NNkt8mxzZYVKzzVO
 6WbQN0VRoMtPdYF8lwlyPsQgjH1JVyoeelpy42kdYHBMiFmS9EfX+eWs2nqujXlS
 f0zP3QckR830V4TCwJdu86LTQMPv2ipFYvmin56Q2Gbcc1eo4LbptL6JkuE/58p2
 NoiKIKE7Y7Ce9Bdxmp8f6Q0DIiehTWOIeOpSUXgRPAvJm3/btwcDhd2e8kHWW3M=
 =mVge
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/stefanha/tags/net-pull-request' into staging

Net patches

# gpg: Signature made Fri 27 Jun 2014 14:10:57 BST using RSA key ID 81AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>"
# gpg:                 aka "Stefan Hajnoczi <stefanha@gmail.com>"

* remotes/stefanha/tags/net-pull-request:
  hw/net/eepro100: Implement read-only bits in MDI registers
  net: move queue number into NICPeers
  net: L2TPv3 transport
  qemu-bridge-helper: Fix fd leak in main()

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-06-29 12:45:54 +01:00
Chen Gang
6b8aeca574 block.c: Don't return success for bdrv_append_temp_snapshot() failure
When failure occurs, 'ret' need be set, or may return 0 to indicate
success. Previously, an error was set in errp, but 0 was returned
anyway. So let bdrv_append_temp_snapshot() return an error code and
use that for the bdrv_open() return value.

Also, error_propagate() need be called only one time within a function.

Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-06-27 20:00:00 +02:00
Benoît Canet
09158f00e0 block: Add replaces argument to drive-mirror
drive-mirror will bdrv_swap the new BDS named node-name with the one
pointed by replaces when the mirroring is finished.

Signed-off-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-06-27 20:00:00 +02:00
Fam Zheng
fee65db771 virtio-blk: Export request handling functions to dataplane
So that dataplane can use virtio_blk_handle_request and
virtio_submit_multiwrite.

Signed-off-by: Fam Zheng <famz@redhat.com>
Tested-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-06-27 18:20:35 +02:00
Fam Zheng
bf4bd461b4 virtio-blk: Make request completion function virtual
virtio_blk_req_complete will call VirtIOBlock.complete_request() to push
data and notify guest. No functional change.

Later, this will allow dataplane to provide it's own (vring_) version.

Signed-off-by: Fam Zheng <famz@redhat.com>
Tested-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-06-27 18:20:32 +02:00
Stefan Hajnoczi
ac46821f2c block: make bdrv_query_stats() static
This function is only called from block/qapi.c.  There is no need to
keep it public.

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Tested-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-06-27 18:19:57 +02:00
Fam Zheng
827805a249 virtio-blk: Convert VirtIOBlockReq.out to structrue
The virtio code currently assumes that the outhdr is in its own iovec.
This is not guaranteed by the spec, so we should relax this assumption.

Convert the VirtIOBlockReq.out field to structrue so that we can use
iov_to_buf and then discard the header from the beginning of iovec.

Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-06-27 18:18:25 +02:00
Fam Zheng
eddb102e86 virtio-blk: Use VirtIOBlockReq.in to drop VirtIOBlockReq.inhdr
In current virtio spec, inhdr is a single byte, and is unlikely to
change for both functionality and compatibility considerations.
Non-dataplane uses .in, and we are on the way to converge them. So
let's unify it to get cleaner code.

Remove .inhdr and use .in.

Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-06-27 18:18:23 +02:00
Fam Zheng
04af2d70c5 virtio-blk: Replace VirtIOBlockRequest with VirtIOBlockReq
Field "inhdr" is added temporarily for a more mechanical change, and
will be dropped in the next commit.

Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-06-27 18:18:20 +02:00
Fam Zheng
671ec3f056 virtio-blk: Convert VirtIOBlockReq.elem to pointer
This will make converging with dataplane code easier.

Add virtio_blk_free_request to handle the freeing of request internal
fields.

Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-06-27 18:18:13 +02:00
Fam Zheng
09f6458770 virtio-blk: Move VirtIOBlockReq to header
For later reusing by dataplane code.

Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-06-27 18:17:59 +02:00
Wenchao Xia
2f44a08b3e qapi event: clean up in callers
This patch improves docs and address small issues in event
callers.

Signed-off-by: Wenchao Xia <wenchaoqemu@gmail.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2014-06-27 09:27:56 -04:00
Alexey Kardashevskiy
9a321e9234 spapr_pci: Use XICS interrupt allocator and do not cache interrupts in PHB
Currently SPAPR PHB keeps track of all allocated MSI (here and below
MSI stands for both MSI and MSIX) interrupt because
XICS used to be unable to reuse interrupts. This is a problem for
dynamic MSI reconfiguration which happens when guest reloads a driver
or performs PCI hotplug. Another problem is that the existing
implementation can enable MSI on 32 devices maximum
(SPAPR_MSIX_MAX_DEVS=32) and there is no good reason for that.

This makes use of new XICS ability to reuse interrupts.

This reorganizes MSI information storage in sPAPRPHBState. Instead of
static array of 32 descriptors (one per a PCI function), this patch adds
a GHashTable when @config_addr is a key and (first_irq, num) pair is
a value. GHashTable can dynamically grow and shrink so the initial limit
of 32 devices is gone.

This changes migration stream as @msi_table was a static array while new
@msi_devs is a dynamic hash table. This adds temporary array which is
used for migration, it is populated in "spapr_pci"::pre_save() callback
and expanded into the hash table in post_load() callback. Since
the destination side does not know the number of MSI-enabled devices
in advance and cannot pre-allocate the temporary array to receive
migration state, this makes use of new VMSTATE_STRUCT_VARRAY_ALLOC macro
which allocates the array automatically.

This resets the MSI configuration space when interrupts are released by
the ibm,change-msi RTAS call.

This fixed traces to be more informative.

This changes vmstate_spapr_pci_msi name from "...lsi" to "...msi" which
was incorrect by accident. As the internal representation changed,
thus bumps migration version number.

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
[agraf: drop g_malloc_n usage]
Signed-off-by: Alexander Graf <agraf@suse.de>
2014-06-27 13:48:27 +02:00
Alexey Kardashevskiy
f32935ea22 vmstate: Add preallocation for migrating arrays (VMS_ALLOC flag)
There are few helpers already to support array migration. However they all
require the destination side to preallocate arrays before migration which
is not always possible due to unknown array size as it might be some
sort of dynamic state. One of the examples is an array of MSIX-enabled
devices in SPAPR PHB - this array may vary from 0 to 65536 entries and
its size depends on guest's ability to enable MSIX or do PCI hotplug.

This adds new VMSTATE_VARRAY_STRUCT_ALLOC macro which is pretty similar to
VMSTATE_STRUCT_VARRAY_POINTER_INT32 but it can alloc memory for migratign
array on the destination side.

This defines VMS_ALLOC flag for a field.

This changes vmstate_base_addr() to do the allocation when receiving
migration.

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Juan Quintela <quintela@redhat.com>
[agraf: drop g_malloc_n usage]
Signed-off-by: Alexander Graf <agraf@suse.de>
2014-06-27 13:48:27 +02:00
Alexey Kardashevskiy
51bba713fe xics: Implement xics_ics_free()
This implements interrupt release function so IRQs can be returned back
to the pool for reuse in cases such as PCI hot plug.

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
2014-06-27 13:48:26 +02:00
Alexey Kardashevskiy
bee763dbfb spapr: Move interrupt allocator to xics
The current allocator returns IRQ numbers from a pool and does not
support IRQs reuse in any form as it did not keep track of what it
previously returned, it only keeps the last returned IRQ. Some use
cases such as PCI hot(un)plug may require IRQ release and reallocation.

This moves an allocator from SPAPR to XICS.

This switches IRQ users to use new API.

This uses LSI/MSI flags to know if interrupt is allocated.

The interrupt release function will be posted as a separate patch.

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
2014-06-27 13:48:26 +02:00
Alexey Kardashevskiy
4af88944d0 xics: Add flags for interrupts
The existing interrupt allocation scheme in SPAPR assumes that
interrupts are allocated at the start time, continously and the config
will not change. However, there are cases when this is not going to work
such as:

1. migration - we will have to have an ability to choose interrupt
numbers for devices in the command line and this will create gaps in
interrupt space.

2. PCI hotplug - interrupts from unplugged device need to be returned
back to interrupt pool, otherwise we will quickly run out of interrupts.

This replaces a separate lslsi[] array with a byte in the ICSIRQState
struct and defines "LSI" and "MSI" flags. Neither of these flags set
signals that the descriptor is not allocated and not in use.

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
2014-06-27 13:48:26 +02:00
Sam bobroff
3b50d8974b spapr: Add RTAS sysparm SPLPAR Characteristics
Add support for the SPLPAR Characteristics parameter to the emulated
RTAS call ibm,get-system-parameter.

The support provides just enough information to allow "cat
/proc/powerpc/lparcfg" to succeed without generating a kernel error
message.

Without this patch the above command will produce the following kernel
message: arch/powerpc/platforms/pseries/lparcfg.c \
parse_system_parameter_string Error calling get-system-parameter \
(0xfffffffd)

Signed-off-by: Sam Bobroff <sam.bobroff@au1.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
2014-06-27 13:48:26 +02:00
Sam bobroff
b907d7b0fd spapr: Add RTAS sysparm UUID
Add support for the UUID parameter to the emulated RTAS call
ibm,get-system-parameter.

Return the guest's UUID as the value for the RTAS UUID system
parameter, or null (a zero length result) if it is not set.

Signed-off-by: Sam Bobroff <sam.bobroff@au1.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
2014-06-27 13:48:26 +02:00
Sam bobroff
3052d95190 spapr: Fix RTAS sysparm DIAGNOSTICS_RUN_MODE
This allows the ibm,get-system-parameter RTAS call to succeed for the
DIAGNOSTICS_RUN_MODE system parameter.

The problem can be seen with "ppc64_cpu --run-mode" from the
powerpc-utils package which fails before this patch with "Machine does
not support diagnostic run mode".

This is corrected by using the rtas_st_buffer() function to write to
the buffer.

The RTAS constants are also moved out into a header file, some new
constants added and the surrounding code slightly simplified.

Signed-off-by: Sam Bobroff <sam.bobroff@au1.ibm.com>
[agraf: remove some commentary]
Signed-off-by: Alexander Graf <agraf@suse.de>
2014-06-27 13:48:25 +02:00
Sam bobroff
ce3fa1eca2 spapr: Add rtas_st_buffer utility function
Add a function to write lengh + data into a buffer as required for the
emulation of the RTAS ibm,get-system-parameter call.

If the destination is smaller than the source, the write is truncated
and success is returned. This matches the behaviour of pHyp.

This will be used in following patches.

Signed-off-by: Sam Bobroff <sam.bobroff@au1.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
2014-06-27 13:48:25 +02:00
Alexey Kardashevskiy
9fc34ada7e spapr_pci_vfio: Add spapr-pci-vfio-host-bridge to support vfio
The patch adds a spapr-pci-vfio-host-bridge device type
which is a PCI Host Bridge with VFIO support. The new device
inherits from the spapr-pci-host-bridge device and adds an "iommu"
property which is an IOMMU id. This ID represents a minimal entity
for which IOMMU isolation can be guaranteed. In SPAPR architecture IOMMU
group is called a Partitionable Endpoint (PE).

Current implementation supports one IOMMU id per QEMU VFIO PHB. Since
SPAPR allows multiple PHB for no extra cost, this does not seem to
be a problem. This limitation may change in the future though.

Example of use:
Configure and Add 3 functions of a multifunctional device to QEMU:
(the NEC PCI USB card is used as an example here):
-device spapr-pci-vfio-host-bridge,id=USB,iommu=4,index=7 \
-device vfio-pci,host=4:0:1.0,addr=1.0,bus=USB,multifunction=true
-device vfio-pci,host=4:0:1.1,addr=1.1,bus=USB
-device vfio-pci,host=4:0:1.2,addr=1.2,bus=USB

where:
* index=7 is a QEMU PHB index (used as source for MMIO/MSI/IO windows
offset);
* iommu=4 is an IOMMU id which can be found in sysfs:
[aik@vpl2 ~]$ cd /sys/bus/pci/devices/0004:00:00.0/
[aik@vpl2 0004:00:00.0]$ ls -l iommu_group
lrwxrwxrwx 1 root root 0 Jun  5 12:49 iommu_group -> ../../../kernel/iommu_groups/4

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
2014-06-27 13:48:23 +02:00
Alexey Kardashevskiy
6d8be4c343 vfio: Add vfio_container_ioctl()
While most operations with VFIO IOMMU driver are generic and used inside
vfio.c, there are still some operations which only specific VFIO IOMMU
drivers implement. The first example of it will be reading a DMA window
start from the host.

This adds a helper which passes an ioctl request to the container's fd.

The helper will check if @req is known. For this, stub is added. This return
-1 on any requests for now.

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
2014-06-27 13:48:23 +02:00
Alexey Kardashevskiy
9bb62a0702 spapr_iommu: Make in-kernel TCE table optional
POWER KVM supports an KVM_CAP_SPAPR_TCE capability which allows allocating
TCE tables in the host kernel memory and handle H_PUT_TCE requests
targeted to specific LIOBN (logical bus number) right in the host without
switching to QEMU. At the moment this is used for emulated devices only
and the handler only puts TCE to the table. If the in-kernel H_PUT_TCE
handler finds a LIOBN and corresponding table, it will put a TCE to
the table and complete hypercall execution. The user space will not be
notified.

Upcoming VFIO support is going to use the same sPAPRTCETable device class
so KVM_CAP_SPAPR_TCE is going to be used as well. That means that TCE
tables for VFIO are going to be allocated in the host as well.
However VFIO operates with real IOMMU tables and simple copying of
a TCE to the real hardware TCE table will not work as guest physical
to host physical address translation is requited.

So until the host kernel gets VFIO support for H_PUT_TCE, we better not
to register VFIO's TCE in the host.

This adds a place holder for KVM_CAP_SPAPR_TCE_VFIO capability. It is not
in upstream yet and being discussed so now it is always false which means
that in-kernel VFIO acceleration is not supported.

This adds a bool @vfio_accel flag to the sPAPRTCETable device telling
that sPAPRTCETable should not try allocating TCE table in the host kernel
for VFIO. The flag is false now as at the moment there is no VFIO.

This adds an vfio_accel parameter to spapr_tce_new_table(), the semantic
is the same. Since there is only emulated PCI and VIO now, the flag is set
to false. Upcoming VFIO support will set it to true.

This is a preparation patch so no change in behaviour is expected

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
2014-06-27 13:48:23 +02:00
Alexey Kardashevskiy
3a3b8502e6 spapr: Fix RTAS token numbers
At the moment spapr_rtas_register() allocates a new token number for every
new RTAS callback so numbers are not fixed and depend on the number of
supported RTAS handlers and the exact order of spapr_rtas_register() calls.
These tokens are copied into the device tree and remain the same during
the guest lifetime.

When we start another guest to receive a migration, it calls
spapr_rtas_register() as well. If the number of RTAS handlers or their
order is different in QEMU on source and destination sides, the "/rtas"
node in the device tree will differ. Since migration overwrites the device
tree (as it overwrites the entire RAM), the actual RTAS config on
the destination side gets broken.

This defines global contant values for every RTAS token which QEMU
is using today.

This changes spapr_rtas_register() to accept a token number instead of
allocating one. This changes all users of spapr_rtas_register().

This changes XICS-KVM not to cache tokens registered with KVM as they
constant now.

This makes TOKEN_BASE global as RTAS_XXX use TOKEN_BASE as
a base. TOKEN_MAX is moved and renamed too and its value is changed
to the last token + 1. Boundary checks for token values are adjusted.

This reserves token numbers for "os-term" handlers and PCI hotplug
which we are working on.

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
2014-06-27 13:48:22 +02:00
Jiri Pirko
575a1c0e42 net: move queue number into NICPeers
It indicates the number of elements in ncs field and makes sense to have
int inside NICPeers. Also in parse_netdev we do not need to access
container and work with NICPeers only.

Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-06-27 11:19:31 +02:00
Kevin Wolf
8ee79e707a block: Catch backing files assigned to non-COW drivers
Since we parse backing.* options to add a backing file from the command
line when the driver didn't assign one, it has been possible to have a
backing file for e.g. raw images (it just was never accessed).

This is obvious nonsense and should be rejected.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
2014-06-26 13:51:01 +02:00
Fam Zheng
dc71ce45de blockjob: Add block_job_yield()
This will unset busy flag and put coroutine to sleep, can be used to
wait for QMP complete/cancel.

Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-06-26 12:12:22 +02:00
Peter Maydell
513d80edc1 migration/next for 20140623
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABCAAGBQJTqGGBAAoJEPSH7xhYctcj+9MQAKyWUh3eC/wVoy+KgtCLz81Y
 kOFTZI2AT0yAunr2ujR6v7DvR1QX5ygYL1rnwmZhwe8/yV3bXr4d7EhzfDRoNrTr
 tPOu13qqBB1i3iNR/dCFAPRopo9dZ/0synYFvJWhzO8EqdFfjJ2xhlE5PD0Slayb
 08qRQsuvkaEgD2Q4iYzqmS/o7pEK3HqBCuTqRYaty0QpIcOKXhUDivImSf1Yhlka
 NJoNuZWL8gMxUqdZZPMMWTh7Hcw1zLrm7ve4ydiBx7EMKSSviBujCpxkAskthYbA
 PYchxQ3kZ36cILxTtimuYayRUDZLu5naoNtlxN79obeRXgZpbZFWr4SwXjWOYAzS
 GBKpaZQLddYWeHDfAChuSNV0ldfrlicabX/rLVBnsJidRlShQBrqIjuh/z2U9Mad
 PKRPyw6QYKZXR8kehCBGgNegOTD+IpLHdI2ea0SrMz8x1sCaiG3NVZk2X5bb0yOa
 X9mvDE35DOOePzbTGzJtTHMCW2w0ZoLBbO/8IL6BViJjvZQoFh/I+dzcVfIlF18j
 mfCi6xPAw3LM7BvQDD/AfFfl40X+O7HYXCeQ0aNksja6eaymuIgMrl3iIPxPYKwz
 vVE4Z073U5YAzEmZrbgB/gag4VCAFCIldDBexUA+eVWpSWPRHXlnzJ+e16JKXTqD
 49oXnzmPeuzJUCSpW9bL
 =2yjp
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/juanquintela/tags/migration/20140623' into staging

migration/next for 20140623

# gpg: Signature made Mon 23 Jun 2014 18:18:57 BST using RSA key ID 5872D723
# gpg: Can't check signature: public key not found

* remotes/juanquintela/tags/migration/20140623: (22 commits)
  vmstate: Refactor & increase tests for primitive types
  vmstate: Return error in case of error
  migration: Remove unneeded minimum_version_id_old
  tests: vmstate static checker: add size mismatch inside substructure
  tests: vmstate static checker: add substructure for usb-kbd for hid section
  tests: vmstate static checker: remove Subsections
  tests: vmstate static checker: remove a subsection
  tests: vmstate static checker: remove Description inside Fields
  tests: vmstate static checker: remove Description
  tests: vmstate static checker: remove Fields
  tests: vmstate static checker: change description name
  tests: vmstate static checker: remove last field in a struct
  tests: vmstate static checker: remove a field
  tests: vmstate static checker: remove a section
  tests: vmstate static checker: minimum_version_id check
  tests: vmstate static checker: version mismatch inside a Description
  tests: vmstate static checker: add version error in main section
  tests: vmstate static checker: incompat machine types
  tests: vmstate static checker: add dump1 and dump2 files
  vmstate-static-checker: script to validate vmstate changes
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-06-24 15:33:42 +01:00
Peter Maydell
089a39486f Merge remote-tracking branch 'remotes/qmp-unstable/queue/qmp' into staging
* remotes/qmp-unstable/queue/qmp: (43 commits)
  monitor: protect event emission
  monitor: protect outbuf and mux_out with mutex
  qemu-char: make writes thread-safe
  qemu-char: move pty_chr_update_read_handler around
  qemu-char: do not call chr_write directly
  qemu-char: introduce qemu_chr_alloc
  qapi event: clean up
  qapi event: convert QUORUM events
  qapi event: convert GUEST_PANICKED
  qapi event: convert BALLOON_CHANGE
  qmp: convert ACPI_DEVICE_OST event
  qapi event: convert SPICE events
  qapi event: convert VNC events
  qapi event: convert NIC_RX_FILTER_CHANGED
  qapi event: convert other BLOCK_JOB events
  qapi event: convert BLOCK_IMAGE_CORRUPTED
  qapi event: convert BLOCK_IO_ERROR and BLOCK_JOB_ERROR
  qapi event: convert DEVICE_TRAY_MOVED
  qapi event: convert DEVICE_DELETED
  qapi event: convert WATCHDOG
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-06-24 13:06:13 +01:00
Peter Maydell
27acb9dd24 pc,pci,vhost,net fixes, enhancements
Don's patches to limit below-4g ram for pc
 Marcel's pcie hotplug rewrite
 Gabriel's changes to e1000 auto-negotiation
 qemu char bugfixes by Stefan
 misc bugfixes
 
 Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJTqEbfAAoJECgfDbjSjVRpFkoIAKj/JZvwQfOkDON12iIou8Fm
 qFhn9t6Tf/HHvwhsrLrPH3wnmTiwJpnSrU2/X9SjSBqugiG4NdS2BrzGS1T5mNET
 Q8q2CdYhrWzriCnNMotoug8oXIJGSfORITsU2c3zH7mLJHi5V6m78PZzLiiyTgJW
 VS0Zb/F2YFn9vDA6vzSX3dUCH/1MGVwTf3pSaGBs3k1DwPT9OpV7ejdhqJ0SB03t
 ih//P3E5t2+kkoUEUEqHVhRepvn0nrDq9fxL97scUbhx5Lz3hBteoewNjlqDsrCv
 kbX+PswfSRWTEbjQ3yeGSyyzITIe/6W7rLb2gYAl2Efn/WDGIw2JXff2XPiro1I=
 =qjXy
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging

pc,pci,vhost,net fixes, enhancements

Don's patches to limit below-4g ram for pc
Marcel's pcie hotplug rewrite
Gabriel's changes to e1000 auto-negotiation
qemu char bugfixes by Stefan
misc bugfixes

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

# gpg: Signature made Mon 23 Jun 2014 16:25:19 BST using RSA key ID D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg:                 aka "Michael S. Tsirkin <mst@redhat.com>"

* remotes/mst/tags/for_upstream: (23 commits)
  xen-hvm: Handle machine opt max-ram-below-4g
  pc & q35: Add new machine opt max-ram-below-4g
  xen-hvm: Fix xen_hvm_init() to adjust pc memory layout
  pcie: coding style tweak
  hw/pcie: better hotplug/hotunplug support
  hw/pcie: implement power controller functionality
  hw/pcie: correct debug message
  q35: Use PC_Q35_COMPAT_1_4 on pc-q35-1.4 compat_props
  virtio-pci: Report an error when msix vectors init fails
  qemu-char: avoid leaking unused fds in tcp_get_msgfds()
  qemu-char: fix qemu_chr_fe_get_msgfd()
  qapi/string-output-visitor: fix human output
  e1000: factor out checking for auto-negotiation availability
  e1000: move e1000_autoneg_timer() to after set_ics()
  e1000: signal guest on successful link auto-negotiation
  e1000: improve auto-negotiation reporting via mii-tool
  e1000: emulate auto-negotiation during external link status change
  qtest: fix vhost-user-test unbalanced mutex locks
  qtest: fix qtest for vhost-user
  libqemustub: add more stubs for qemu-char
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-06-24 11:14:47 +01:00
Amit Shah
abfd9ce341 migration: dump vmstate info as a json file for static analysis
This commit adds a new command, '-dump-vmstate', that takes a filename
as an argument.  When executed, QEMU will dump the vmstate information
for the machine type it's invoked with to the file, and quit.

The JSON-format output can then be used to compare the vmstate info for
different QEMU versions, specifically to test whether live migration
would break due to changes in the vmstate data.

A Python script that compares the output of such JSON dumps is included
in the following commit.

Signed-off-by: Amit Shah <amit.shah@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
2014-06-23 19:14:50 +02:00
Paolo Bonzini
9005b2a758 qemu-char: make writes thread-safe
This will let threads other than the I/O thread raise QMP events.

GIOChannel is thread-safe, and send and receive state is usually
well-separated.  The only driver that requires some care is the
pty driver, where some of the state is shared by the read and write
sides.  That state is protected with the chr_write_lock too.

Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2014-06-23 11:12:28 -04:00
Paolo Bonzini
db39fcf1f6 qemu-char: introduce qemu_chr_alloc
The next patch will modify this function to initialize state that is
common to all backends.

Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2014-06-23 11:12:28 -04:00
Wenchao Xia
751751732c qapi event: clean up
Signed-off-by: Wenchao Xia <wenchaoqemu@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2014-06-23 11:12:28 -04:00
Wenchao Xia
aef9d3115f qapi event: convert BALLOON_CHANGE
Signed-off-by: Wenchao Xia <wenchaoqemu@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2014-06-23 11:12:28 -04:00
Igor Mammedov
5f41fbba90 qmp: convert ACPI_DEVICE_OST event
... using new QAPI event infrastructure

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2014-06-23 11:12:28 -04:00
Wenchao Xia
7cfadb6b52 qapi event: convert SPICE events
SPICE_INITIALIZED, SPICE_CONNECTED, SPICE_DISCONNECTED and
SPICE_MIGRATE_COMPLETED are converted in one patch, since they
use some common functions. inet_strfamily() is removed since no
callers exist anymore.

Note that there is no existing doc for SPICE_MIGRATE_COMPLETED
in docs/qmp/qmp-events.txt before this patch.

Signed-off-by: Wenchao Xia <wenchaoqemu@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2014-06-23 11:12:28 -04:00
Wenchao Xia
bcada37b19 qapi event: convert other BLOCK_JOB events
Since BLOCK_JOB_COMPLETED, BLOCK_JOB_CANCELLED, BLOCK_JOB_READY are
related, convert them in one patch. The block_job_event_* functions
are used to keep encapsulation of BlockJob structure.

Signed-off-by: Wenchao Xia <wenchaoqemu@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2014-06-23 11:12:28 -04:00
Wenchao Xia
5a2d2cbd88 qapi event: convert BLOCK_IO_ERROR and BLOCK_JOB_ERROR
Signed-off-by: Wenchao Xia <wenchaoqemu@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2014-06-23 11:12:27 -04:00
Wenchao Xia
e010ad8f1e qapi event: convert RTC_CHANGE
This patch also eliminates build time warning caused by no caller
of monitor_qapi_event_throttle().

Signed-off-by: Wenchao Xia <wenchaoqemu@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2014-06-23 11:12:27 -04:00
Don Slutz
c87b152072 pc & q35: Add new machine opt max-ram-below-4g
This is a pc & q35 only machine opt.

If you add enough PCI devices then all mmio for them will not fit
below 4G which may not be the layout the user wanted. This allows
you to increase the below 4G address space that PCI devices can use
(aka decrease ram below 4G) and therefore in more cases not have any
mmio that is above 4G.

For example using "-machine pc,max-ram-below-4g=2G" on the command
line will limit the amount of ram that is below 4G to 2G.

Note: this machine option cannot be used to increase the amount
of ram below 4G.

Signed-off-by: Don Slutz <dslutz@verizon.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

MST: fix 32 bit
2014-06-23 18:02:41 +03:00
Wenchao Xia
a589569f2f qapi: adjust existing defines
In order to let event defines use existing types later, instead of
redefine new ones, some old type defines for spice and vnc are changed,
and BlockErrorAction is moved from block.h to qapi schema. Note that
BlockErrorAction is not merged with BlockdevOnError.

At this point, VncInfo is not made a child of VncBasicInfo, because
VncBasicInfo has mandatory fields where VncInfo makes them optional.

Signed-off-by: Wenchao Xia <wenchaoqemu@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2014-06-23 11:01:25 -04:00
Wenchao Xia
f882126024 qapi: add event helper functions
This file holds some functions that do not need to be generated.

Signed-off-by: Wenchao Xia <wenchaoqemu@gmail.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2014-06-23 11:01:25 -04:00
Wenchao Xia
506f40ff7d os-posix: include sys/time.h
Since gettimeofday() is used in this header file as a macro define,
include the function's define header file, to avoid compile warning
when other file include os-posix.h.

Signed-off-by: Wenchao Xia <wenchaoqemu@gmail.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2014-06-23 11:01:24 -04:00
Luiz Capitulino
a49db98d1f fpu: softfloat: drop INLINE macro
This commit expands all uses of the INLINE macro and drop it.

The reason for this is to avoid clashes with external libraries with
bad name conventions and also because renaming keywords is not a good
practice.

PS: I'm fine with this change to be licensed under softfloat-2a or
softfloat-2b.

Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2014-06-23 11:00:12 -04:00
Don Slutz
3c2a96699e xen-hvm: Fix xen_hvm_init() to adjust pc memory layout
This is just below_4g_mem_size and above_4g_mem_size which is used later in QEMU.

Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Don Slutz <dslutz@verizon.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-23 17:50:04 +03:00
Marcel Apfelbaum
f23b6bdc3c hw/pcie: implement power controller functionality
It is needed by hot-unplug in order to get an indication
from the OS when the device can be physically detached.

Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-23 17:48:42 +03:00
Michael S. Tsirkin
7145872ed3 vhost: block migration if backend does not log memory
vhost user does not support LOG_ALL feature bit.
Generally, we should not try to set this bit without
checking that backend can support it first.

Detect and block migration.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Nikolay Nikolaev <n.nikolaev@virtualopensystems.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-23 17:37:59 +03:00
Richard Henderson
224f9fd419 tcg-ppc: Merge cache-utils into the backend
As a "utility", it only supported ppc, and in a way that other
tcg backends provided directly in tcg-target.h.  Removing this
disparity is easier now that the two ppc backends are merged.

Tested-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>
2014-06-23 07:32:30 -07:00
Richard Henderson
2b45c3f500 qemu/osdep: Remove the need for qemu_init_auxval
Instead of getting backup auxv data from the env pointer given to main,
read it from /proc/self/auxv.  We can do this at any time, so we're not
tied to any ordering wrt a call to qemu_init_auxval from main.

Tested-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>
2014-06-23 07:32:27 -07:00
Richard Henderson
9171478c95 tcg-ppc: Use uintptr_t in ppc_tb_set_jmp_target
Tested-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>
2014-06-23 07:29:30 -07:00
Peter Maydell
d9c1647d89 Block pull request
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJTp+sdAAoJEJykq7OBq3PIzoEH/RIaGU7Sg9jxf1O30if5Ilb2
 jw+r0DkYxNiD6qj8DWHT7xnqdJvSYuHz1h8hWth+JqHTNrdQhm9pJWi403WigNmD
 am7NIZQBE7x3koX5gwP4jzlpi7hRFq2BNd17E4KRqvFEUETjKVkY0AsiwWAKI9/4
 i/zDXhj8beKPkHftz4fOtvN+NsKr+8icTmst796J28Eb82+pshqKxUICksE4DIR8
 zH97TsuGAzZelrxnMewEj/ntqj0qHqxdyHq5VvQB5aBa0hp45WifcbWbI7j3Bgi1
 K1ujlC2jmnVLL6DkivMT5TlJjsb2XXK/MWVneaUJU31qS3ivbD/o0SOqa1ca4aM=
 =2s4u
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/stefanha/tags/block-pull-request' into staging

Block pull request

# gpg: Signature made Mon 23 Jun 2014 09:53:49 BST using RSA key ID 81AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>"
# gpg:                 aka "Stefan Hajnoczi <stefanha@gmail.com>"

* remotes/stefanha/tags/block-pull-request:
  block: asynchronously stop the VM on I/O errors
  vl: allow other threads to do qemu_system_vmstop_request
  sheepdog: fix NULL dereference in sd_create
  QemuOpts: check NULL opts in qemu_opt_get functions
  block: m25p80: Support read only bdrvs.
  block: m25p80: sync_page(): Deindent function body.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-06-23 12:55:22 +01:00
Michael S. Tsirkin
3840f84290 console: move chardev declarations to sysemu/char.h
move generic chardev APIs to sysemu/char.h, to make them available to
callers which can not depend on the whole of ui/console.h.
This fixes a build error on systems without pixman-devel:

./configure --disable-tools --disable-docs --target-list=arm-linux-user
...
pixman            none
...
make
...
In file included from
/data/home/nchip/linaro/qemu/include/ui/console.h:4:0,
                 from /data/home/nchip/linaro/qemu/stubs/vc-init.c:2:
/data/home/nchip/linaro/qemu/include/ui/qemu-pixman.h:14:20: fatal
error: pixman.h: No such file or directory
 #include <pixman.h>
                    ^
compilation terminated.

Reported-by: Riku Voipio <riku.voipio@iki.fi>
Tested-by: Riku Voipio <riku.voipio@iki.fi>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 1403508500-32691-1-git-send-email-mst@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-06-23 10:56:20 +01:00
Paolo Bonzini
74892d2468 vl: allow other threads to do qemu_system_vmstop_request
There patch protects vmstop_requested with a lock and introduces
qemu_system_vmstop_request_prepare.

Together with the new call to qemu_vmstop_requested in vm_start,
qemu_system_vmstop_request_prepare avoids a race where the VM could remain
stopped even though the iostatus of a block device has already been set
(for example).

qemu_system_vmstop_request_prepare however also lets the caller thread
delay observation of the state change until it has itself communicated
that change to the user.  This delay avoids any possibility of a wrong
reordering of the BLOCK_IO_ERROR event and the subsequent STOP event.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-06-23 16:36:13 +08:00
Peter Maydell
d70a319b8d Merge remote-tracking branch 'remotes/kvm/uq/master' into staging
* remotes/kvm/uq/master:
  hw/mips: malta: Don't boot from flash with KVM T&E
  MAINTAINERS: Add entry for MIPS KVM
  target-mips: Enable KVM support in build system
  hw/mips: malta: Add KVM support
  hw/mips: In KVM mode, inject IRQ2 (I/O) interrupts via ioctls
  target-mips: Call kvm_mips_reset_vcpu() from mips_cpu_reset()
  target-mips: kvm: Add main KVM support for MIPS
  kvm: Allow arch to set sigmask length
  target-mips: get_physical_address: Add KVM awareness
  target-mips: get_physical_address: Add defines for segment bases
  hw/mips: Add API to convert KVM guest KSEG0 <-> GPA
  hw/mips/cputimer: Don't start periodic timer in KVM mode
  target-mips: Reset CPU timer consistently
  KVM: Fix GSI number space limit

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-06-20 19:25:18 +01:00
Peter Maydell
0a99aae5fa pc,pci,virtio,hotplug fixes, enhancements
numa work by Hu Tao and others
 memory hotplug by Igor
 vhost-user by Nikolay, Antonios and others
 guest virtio announcements by Jason
 qtest fixes by Sergey
 qdev hotplug fixes by Paolo
 misc other fixes mostly by myself
 
 Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJTowW+AAoJECgfDbjSjVRpnMMH/jp3sKGzJumYLbi5ihjmYyND
 jYd6ySXoVAjUTgaCvdje5srisOap8pbc783kQvQS4CeWsjZ5Vvh+PZjkBPIqF1pD
 celxGQ43CY7QSUWq+02Dg9VIUwLwZqdKlxNsV01FligQn+ZBQ6sQ6ksWx7oGzqRt
 5/HMZykbwUvSk/4xGUaMn2+/4uhQ0Wz5EsCkv9L/u8kS72k6ldc/tCGZMzBUNHTM
 rW5FPYwMQP0MXgGTXnlLEQjJ7Lozc66IaMZoHw/a/aGSIxdag9Otj0ADuXq6yZaV
 Xi4O/EOJWd1JpSG7w8LOyIZNakpHkU43fmJCLzBjDAupHeRp57TcW5ox4PJYAtg=
 =Oxdt
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging

pc,pci,virtio,hotplug fixes, enhancements

numa work by Hu Tao and others
memory hotplug by Igor
vhost-user by Nikolay, Antonios and others
guest virtio announcements by Jason
qtest fixes by Sergey
qdev hotplug fixes by Paolo
misc other fixes mostly by myself

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

* remotes/mst/tags/for_upstream: (109 commits)
  numa: use RAM_ADDR_FMT with ram_addr_t
  qapi/string-output-visitor: fix bugs
  tests: simplify code
  qapi: fix input visitor bugs
  acpi: rephrase comment
  qmp: add ACPI_DEVICE_OST event handling
  qmp: add query-acpi-ospm-status command
  acpi: implement ospm_status() method for PIIX4/ICH9_LPC devices
  acpi: introduce TYPE_ACPI_DEVICE_IF interface
  qmp: add query-memory-devices command
  numa: handle mmaped memory allocation failure correctly
  pc: acpi: do not hardcode preprocessor
  qmp: clean out whitespace
  qdev: recursively unrealize devices when unrealizing bus
  qdev: reorganize error reporting in bus_set_realized
  qapi: fix build on glib < 2.28
  qapi: make string output visitor parse int list
  qapi: make string input visitor parse int list
  tests: fix memory leak in test of string input visitor
  hmp: add info memdev
  ...

Conflicts:
	include/hw/i386/pc.h
[PMM: fixed minor conflict in pc.h]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-06-20 18:01:24 +01:00
Michael S. Tsirkin
b4acfbcd95 acpi: rephrase comment
"only upto" is not proper English.
Say "up to" and drop "only".

Reported-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-19 18:44:22 +03:00
Igor Mammedov
02edd407f3 qmp: add ACPI_DEVICE_OST event handling
emits event when ACPI OSPM evaluates _OST method
of ACPI device.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-19 18:44:22 +03:00
Igor Mammedov
43f5041008 acpi: implement ospm_status() method for PIIX4/ICH9_LPC devices
... using TYPE_ACPI_DEVICE_IF interface.
Which provides status reporting of ACPI declared memory devices

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-19 18:44:22 +03:00
Igor Mammedov
521b3673ac acpi: introduce TYPE_ACPI_DEVICE_IF interface
... it will be used to abstract generic ACPI bits from
device that implements ACPI interface.

ACPIOSTInfo type is used for passing-through raw _OST
event/status codes reported by guest OS to a management
layer. It lets management tools interpret values
as specified by ACPI spec if it is interested in it.

QEMU doesn't encode these values as enum, since it
doesn't need to handle them and it allows interface
to scale well without any changes in QEMU while guest
OS and management evolves in time.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-19 18:44:22 +03:00
Igor Mammedov
6f2e27301d qmp: add query-memory-devices command
... allowing to get state of present memory devices.
Currently implemented only for PCDIMMDevice.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-19 18:44:22 +03:00
Hu Tao
4cf1b76bf1 hostmem: add properties for NUMA memory policy
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
[Raise errors on setting properties if !CONFIG_NUMA.  Add BUILD_BUG_ON
 checks. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-19 18:44:21 +03:00
Paolo Bonzini
dbcb898118 hostmem: add property to map memory with MAP_SHARED
A new "share" property can be used with the "memory-file" backend to
map memory with MAP_SHARED instead of MAP_PRIVATE.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-19 18:44:20 +03:00
Paolo Bonzini
a35ba7be4b hostmem: allow preallocation of any memory region
And allow preallocation of file-based memory even without -mem-prealloc.
Some care is necessary because -mem-prealloc does not allow disabling
preallocation for hostmem-file.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-19 18:44:20 +03:00
Paolo Bonzini
605d0a945d hostmem: add merge and dump properties
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-19 18:44:20 +03:00
Michael S. Tsirkin
2925020d33 osdep: add merge and dump flags
will be used by follow up patch

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-19 18:44:20 +03:00
Hu Tao
bd9262d95f hostmem: separate allocation from UserCreatable complete method
This allows the superclass to set various policies on the memory
region that the subclass creates. Drops hostmem-ram's complete method
accordingly.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-19 18:44:20 +03:00
Paolo Bonzini
9521d42b54 pc: pass MachineState to pc_memory_init
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
Reviewed-By: Igor Mammedov <imammedo@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-19 18:44:20 +03:00
Paolo Bonzini
7f56e740a6 memory: add error propagation to file-based RAM allocation
Right now, -mem-path will fall back to RAM-based allocation in some
cases.  This should never happen with "-object memory-file", prepare
the code by adding correct error propagation.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

MST: drop \n at end of error messages
2014-06-19 18:44:20 +03:00
Paolo Bonzini
0b183fc871 memory: move mem_path handling to memory_region_allocate_system_memory
Like the previous patch did in exec.c, split memory_region_init_ram and
memory_region_init_ram_from_file, and push mem_path one step further up.
Other RAM regions than system memory will now be backed by regular RAM.

Also, boards that do not use memory_region_allocate_system_memory will
not support -mem-path anymore.  This can be changed before the patches
are merged by migrating boards to use the function.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-19 18:44:19 +03:00
Paolo Bonzini
7febe36f9a numa: add -numa node,memdev= option
This option provides the infrastructure for binding guest NUMA nodes
to host NUMA nodes.  For example:

 -object memory-ram,size=1024M,policy=bind,host-nodes=0,id=ram-node0 \
 -numa node,nodeid=0,cpus=0,memdev=ram-node0 \
 -object memory-ram,size=1024M,policy=interleave,host-nodes=1-3,id=ram-node1 \
 -numa node,nodeid=1,cpus=1,memdev=ram-node1

The option replaces "-numa node,mem=".

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>

MST: conflict resolution
2014-06-19 18:44:19 +03:00
Hu Tao
1f21772db0 qom: introduce object_property_get_enum and object_property_get_uint16List
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-19 18:44:19 +03:00
Hu Tao
7f8f9ef1da Introduce signed range.
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

MST: split up patch
2014-06-19 18:44:19 +03:00
Paolo Bonzini
7bd4f430a3 memory: move RAM_PREALLOC_MASK to exec.c, rename
Prepare for adding more flags.  The "_MASK" suffix is unique, kill it.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-19 18:44:19 +03:00
Paolo Bonzini
38183310be memory: move preallocation code out of exec.c
So that backends can use it.

Since we need the page size for efficiency, move code to compute it
out of translate-all.c and into util/oslib-win32.c.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-19 18:44:19 +03:00
Paolo Bonzini
e1c57ab86f memory: reorganize file-based allocation
Split the internal interface in exec.c to a separate function, and
push the check on mem_path up to memory_region_init_ram.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-19 18:44:19 +03:00
Paolo Bonzini
dfabb8b916 numa: introduce memory_region_allocate_system_memory
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

MST: resolve conflicts
2014-06-19 18:44:19 +03:00
Wanlong Gao
45e30bf3a9 NUMA: expand MAX_NODES from 64 to 128
libnuma choosed 128 for MAX_NODES, so we follow libnuma here.

Signed-off-by: Wanlong Gao <gaowanlong@cn.fujitsu.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-19 18:44:18 +03:00
Wanlong Gao
0042109a6a NUMA: convert -numa option to use OptsVisitor
Signed-off-by: Wanlong Gao <gaowanlong@cn.fujitsu.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Tested-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-19 18:44:18 +03:00
Wanlong Gao
8c85901ed3 NUMA: Add numa_info structure to contain numa nodes info
Add the numa_info structure to contain the numa nodes memory,
VCPUs information and the future added numa nodes host memory
policies.

Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Andre Przywara <andre.przywara@amd.com>
Signed-off-by: Wanlong Gao <gaowanlong@cn.fujitsu.com>
[Fix hw/ppc/spapr.c - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-19 18:44:18 +03:00
Wanlong Gao
96d0e26c23 NUMA: move numa related code to new file numa.c
Signed-off-by: Wanlong Gao <gaowanlong@cn.fujitsu.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Andre Przywara <andre.przywara@amd.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>

MST: comment tweaks
2014-06-19 18:44:18 +03:00
Peter Maydell
6baa963f4d Merge remote-tracking branch 'remotes/bonzini/scsi-next' into staging
* remotes/bonzini/scsi-next:
  virtio-scsi: define dummy handle_output for vhost-scsi vqs
  block/iscsi: drop obsolete pointers from iscsi_co_writev
  block/iscsi: fix init value for iTask->retries
  block/iscsi: bump libiscsi requirement to 1.9.0
  virtio-scsi: add support for the any_layout feature
  virtio-scsi: introduce virtio_scsi_complete_cmd_req
  virtio-scsi: prepare sense data handling for any_layout
  virtio-scsi: add extra argument and return type to qemu_sgl_concat
  virtio-scsi: add target swap for VirtIOSCSICtrlTMFReq fields
  virtio-scsi: start preparing for any_layout
  util: add return value to qemu_iovec_concat_iov
  megasas: use PCI DMA API
  scsi: Print command name in debug
  scsi-disk: fix bug in scsi_block_new_request() introduced by commit 137745c
  scsi-disk.c: Fix compilation with -DDEBUG_SCSI
  block/iscsi: use 16 byte CDBs only when necessary
  block/iscsi: fix potential segfault on early callback
  block/iscsi: handle BUSY condition

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-06-19 16:18:04 +01:00
Sean Bruno
9f6f7f1a85 include/qemu/aes.h: Avoid conflicts with FreeBSD AES functions
FreeBSD's libcrypto provides functions with the same names as us;
use #define to rename our versions to avoid conflicts at link time.

Signed-off-by: Sean Bruno <sbruno@freebsd.org>
Signed-off-by: Ed Maste <emaste@freebsd.org>
Message-id: 1402930927-41125-1-git-send-email-sbruno@freebsd.org
[PMM: improved commit message, fixed comment typo]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-06-19 16:13:38 +01:00
Nikolay Nikolaev
d314f586b3 Add new vhost-user netdev backend
Add a new QEMU netdev backend that is intended to invoke vhost_net with the
vhost-user backend. It uses an Unix socket chardev to establish a
communication with the 'slave' (client and server mode supported).

At runtime the netdev will handle OPEN/CLOSE events from the chardev. Upon
disconnection it will set link_down accordingly and notify virtio-net; the
virtio-net interface will go down.

Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com>
Signed-off-by: Nikolay Nikolaev <n.nikolaev@virtualopensystems.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-19 16:41:57 +03:00
Nikolay Nikolaev
1a1bfac9ee Add vhost-backend and VhostBackendType
Use vhost_set_backend_type to initialise a proper vhost_ops structure.
In vhost_net_init and vhost_net_start_one call conditionally TAP related
initialisation depending on the vhost backend type.

Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com>
Signed-off-by: Nikolay Nikolaev <n.nikolaev@virtualopensystems.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-19 16:41:56 +03:00
Nikolay Nikolaev
24d1eb33eb Add vhost_ops to vhost_dev struct and replace all relevant ioctls
Decouple vhost from the Linux kernel by introducing vhost_ops. The
intention is to provide different backends - a 'kernel' backend based on
the ioctl interface, and an 'user' backend based on a UNIX domain socket
and shared memory interface.

Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com>
Signed-off-by: Nikolay Nikolaev <n.nikolaev@virtualopensystems.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-19 16:41:56 +03:00
Nikolay Nikolaev
81647a655f vhost_net_init will use VhostNetOptions to get all its arguments
vhost_dev_init will replace devfd and devpath with a single opaque argument.
This is initialised with a file descriptor. When TAP is used (through
vhost_net), open /dev/vhost-net and pass the fd as an opaque parameter in
VhostNetOptions. The same applies to vhost-scsi - open /dev/vhost-scsi and
pass the fd.

Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com>
Signed-off-by: Nikolay Nikolaev <n.nikolaev@virtualopensystems.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-19 16:41:56 +03:00
Nikolay Nikolaev
ed8b4afe5f Refactor virtio-net to use generic get_vhost_net
This decouples virtio-net from the TAP netdev backend and allows support
for other backends to be implemented.

Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com>
Signed-off-by: Nikolay Nikolaev <n.nikolaev@virtualopensystems.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-19 16:41:55 +03:00
Nikolay Nikolaev
2e6d46d77e vhost: add vhost_get_features and vhost_ack_features
Generalize the features get/ack to be used for both vhost-net and vhost-scsi.
In vhost-net add vhost_net_get_feature_bits to select the feature bit set
depending on the NetClient kind.

Signed-off-by: Nikolay Nikolaev <n.nikolaev@virtualopensystems.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-19 16:41:55 +03:00
Nikolay Nikolaev
cdaa86a54b Add G_IO_HUP handler for socket chardev
This is used to detect that the remote end has disconnected. Just call
tcp_char_disconnect on receiving this event.

Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com>
Signed-off-by: Nikolay Nikolaev <n.nikolaev@virtualopensystems.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-19 16:41:55 +03:00
Nikolay Nikolaev
c76bf6bb8f Add chardev API qemu_chr_fe_get_msgfds
This extends the existing qemu_chr_fe_get_msgfd by allowing to read a set
of fds. The function for receiving the fds - unix_process_msgfd is extended
to allocate the needed array size.

Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com>
Signed-off-by: Nikolay Nikolaev <n.nikolaev@virtualopensystems.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-19 16:41:55 +03:00
Nikolay Nikolaev
d39aac7aac Add chardev API qemu_chr_fe_set_msgfds
This will set an array of file descriptors to the internal structures.
The next time a message is send the array will be send as ancillary
data. This feature works on the UNIX domain socket backend only.

Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com>
Signed-off-by: Nikolay Nikolaev <n.nikolaev@virtualopensystems.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-19 16:41:54 +03:00
Nikolay Nikolaev
7b0bfdf52d Add chardev API qemu_chr_fe_read_all
This function will attempt to read data from the chardev trying
to fill the buffer up to the given length.
Add tcp_chr_disconnect to reuse disconnection code where needed.

Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com>
Signed-off-by: Nikolay Nikolaev <n.nikolaev@virtualopensystems.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-19 16:41:54 +03:00
Nikolay Nikolaev
69e03ae64b Add kvm_eventfds_enabled function
Add a function to check if the eventfd capability is present in KVM in
the host kernel.

Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com>
Signed-off-by: Nikolay Nikolaev <n.nikolaev@virtualopensystems.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
2014-06-19 16:41:54 +03:00
Jason Wang
f57fcf7063 virtio-net: announce self by guest
It's hard to track all mac addresses and their configurations (e.g
vlan or ipv6) in qemu. Without this information, it's impossible to
build proper garp packet after migration. The only possible solution
to this is let guest (who knows all configurations) to do this.

So, this patch introduces a new readonly config status bit of virtio-net,
VIRTIO_NET_S_ANNOUNCE which is used to notify guest to announce
presence of its link through config update interrupt.When guest has
done the announcement, it should ack the notification through
VIRTIO_NET_CTRL_ANNOUNCE_ACK cmd. This feature is negotiated by a new
feature bit VIRTIO_NET_F_ANNOUNCE (which has already been supported by
Linux guest).

During load, a counter of announcing rounds is set so that after the vm is
running it can trigger rounds of config interrupts to notify the guest to build
and send the correct garps.

Cc: Liuyongan <liuyongan@huawei.com>
Cc: Amos Kong <akong@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-19 16:41:54 +03:00
Jason Wang
508e1180d3 migration: introduce self_announce_delay()
This patch introduces self_announce_delay() to calculate the delay for
the next announce round. This could be used by other device e.g
virtio-net who wants to do announcing by itself.

Signed-off-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-19 16:41:54 +03:00
Jason Wang
110f463062 migration: export SELF_ANNOUNCE_ROUNDS
Export it for other users.

Signed-off-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-19 16:41:54 +03:00
Michael S. Tsirkin
292b1634d0 ich: get rid of spaces in type name
Names with spaces in them are nasty, let's not go there.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-19 16:41:53 +03:00
Igor Mammedov
bf1e893959 pc: add "hotplug-memory-region-size" property to PC_MACHINE
... it will be used by acpi-build code and by unit tests

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-19 16:41:52 +03:00
Igor Mammedov
bef3492d11 pc: ACPI BIOS: implement memory hotplug interface
- provides static SSDT object for memory hotplug that can handle
  upto 256 hotplugable memory slots
- SSDT template for memory devices and runtime generator
  of them in SSDT table.

Signed-off-by: Vasilis Liaskovitis <vasilis.liaskovitis@profitbricks.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-19 16:41:51 +03:00
Igor Mammedov
781bbd6bec pc: add acpi-device link to PCMachineState
the link will used later to access device implementing
ACPI functions instead of adhoc lookup in QOM tree.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-19 16:41:51 +03:00
Igor Mammedov
f816a62daa pc: migrate piix4 & ich9 MemHotplugState
Adds an optional subsection that allows to migrate current
state of acpi_memory_hotplug of ACPI PM device.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-19 16:41:51 +03:00
Igor Mammedov
1f8621842e acpi:ich9: add memory hotplug handling
Add memory hotplug initialization/handling to ICH9 LPC device
and enable it by default for post 2.0 machine types

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-19 16:41:51 +03:00
Igor Mammedov
34774320c3 acpi:piix4: add memory hotplug handling
Add memory hotplug initialization/handling to PIIX4_PM device
and enable it by default for post 2.0 machine types

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

MST: resolve conflict in pc.h
2014-06-19 16:41:50 +03:00
Igor Mammedov
3ef77acab2 acpi: memory hotplug ACPI hardware implementation
- implements QEMU hardware part of memory hotplug protocol
  described at "docs/specs/acpi_mem_hotplug.txt"
- handles only memory add notification event for now

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-19 16:41:49 +03:00
Igor Mammedov
7e629d1d8d acpi: rename cpu_hotplug_defs.h to pc-hotplug.h
to make it more generic, so it could be used for memory hotplug
as well.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-19 16:41:49 +03:00
Igor Mammedov
0cd03d89b9 pc-dimm: add busy slot check and slot auto-allocation
- if slot property is not specified on -device/device_add command,
treat default value as request for assigning PCDIMMDevice to
the first free slot.

- if slot is provided with -device/device_add command, attempt to
use it or fail command if it's already occupied.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-19 16:41:49 +03:00
Igor Mammedov
0b31257116 pc-dimm: add busy address check and address auto-allocation
- if 'addr' property is not specified on -device/device_add command,
treat the default value as request for assigning PCDIMMDevice to
the first free memory region.

- if 'addr' is provided with -device/device_add command, attempt to
use it or fail command if it's already occupied or falls inside
of an existing PCDIMMDevice memory region.

Note:
GCompareFunc(a, b) used by g_slist_insert_sorted() returns 'gint',
however it might be too small to fit difference between
2 addresses. So use 128bit to calculate the difference and normalize
result to -1/0/1 return values.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Tang Chen <tangchen@cn.fujitsu.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Andrey Korolyov <andrey@xdel.ru>

MST: commit log tweaks
2014-06-19 16:41:49 +03:00
Igor Mammedov
95bee274fd pc: add memory hotplug handler to PC_MACHINE
that will perform mapping of PC_DIMM device into guest's RAM address space

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-19 16:41:48 +03:00
Igor Mammedov
de268e134c pc: add 'etc/reserved-memory-end' fw_cfg interface for SeaBIOS
'etc/reserved-memory-end' will allow QEMU to tell BIOS where PCI
BARs mapping could safely start in high memory.

Allowing BIOS to start mapping 64-bit PCI BARs at address where it
wouldn't conflict with other mappings QEMU might place before it.

That permits QEMU to reserve extra address space before
64-bit PCI hole for memory hotplug.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-19 16:41:48 +03:00
Igor Mammedov
a0cc8856e8 pc: exit QEMU if number of slots more than supported 256
... which is imposed by current naming scheme of ACPI memory devices.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-19 16:41:48 +03:00
Igor Mammedov
619d11e463 pc: initialize memory hotplug address space
initialize and map hotplug memory address space container
into guest's RAM address space.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-19 16:41:47 +03:00
Igor Mammedov
eed2bacfd2 memory: add memory_region_is_mapped() API
which allows to check if MemoryRegion is already mapped.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-19 16:41:47 +03:00
Vasilis Liaskovitis
10b7e74bf2 pc: implement pc-dimm device abstraction
Each hotplug-able memory slot is a PCDIMMDevice.
A hot-add operation for a memory device:
- creates a new PCDIMMDevice and makes hotplug controller to map it into
  guest address space

Hotplug operations are done through normal device_add commands.
For migration case, all hotplugged memory devices on source should be
specified on target's command line using '-device' option with
properties set to the same values as on source.

To simplify review, patch introduces only PCDIMMDevice QOM skeleton that
will be extended by following patches to implement actual memory hotplug
and related functions.

Signed-off-by: Vasilis Liaskovitis <vasilis.liaskovitis@profitbricks.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-19 16:41:47 +03:00
Igor Mammedov
b745454811 qdev: hotplug for bus-less devices
Add get_hotplug_handler() method to machine, and
make bus-less device use it during hotplug
as a means to discover a hotplug handler controller.
The returned controller is used to perform hotplug
actions.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-19 16:41:46 +03:00
Igor Mammedov
c270fb9eff vl.c: extend -m option to support options for memory hotplug
Add following parameters:
  "slots" - total number of hotplug memory slots
  "maxmem" - maximum possible memory

"slots" and "maxmem" should go in pair and "maxmem" should be greater
than "mem" for memory hotplug to be enabled.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

MST: fix build on 32 bit
2014-06-19 16:41:46 +03:00
Ming Lei
91d670fbf9 virtio-scsi: define dummy handle_output for vhost-scsi vqs
vhost userspace needn't to handle vq's notification from guest,
so define dummy handle_output callback for all vqs of vhost-scsi.

In some corner cases(such as when handling vq's reset from VM), virtio-pci
still trys to handle pending virtio-scsi events, then object check failure
inside virtio_scsi_handle_event() for vhost-scsi can be triggered.

The issue can be reproduced by 'rmmod virtio-scsi', 'system sleep' or reboot
inside VM.

Cc: qemu-stable@nongnu.org
Cc: Anthony Liguori <aliguori@amazon.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Ming Lei <ming.lei@canonical.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-06-19 10:15:48 +02:00
Igor Mammedov
1f07048933 add memdev backend infrastructure
Provides framework for splitting host RAM allocation/
policies into a separate backend that could be used
by devices.

Initially only legacy RAM backend is provided, which
uses memory_region_init_ram() allocator and compatible
with every CLI option that affects memory_region_init_ram().

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-18 21:10:30 +03:00
Igor Mammedov
d5747cace7 pc: create custom generic PC machine type
it will be used for PC specific options/variables

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-18 21:09:55 +03:00
Aurelien Jarno
739b7a9075 bitops: provide an inline implementation of find_first_bit
find_first_bit has started to be used heavily in TCG code. The current
implementation based on find_next_bit is not optimal and can't be
optimized be the compiler if the bit array has a fixed size, which is
the case most of the time.

This new implementation does not use find_next_bit and is yet small
enough to be inlined.

Cc: Corentin Chary <corentin.chary@gmail.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2014-06-18 18:10:47 +02:00
James Hogan
aed6efb90c kvm: Allow arch to set sigmask length
MIPS/Linux is unusual in having 128 signals rather than just 64 like
most other architectures. This means its sigmask is 16 bytes instead of
8, so allow arches to override the sigmask->len value passed to the
KVM_SET_SIGNAL_MASK ioctl in kvm_set_signal_mask() by calling
kvm_set_sigmask_len() from kvm_arch_init(). Otherwise default to 8
bytes.

Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: Sanjay Lal <sanjayl@kymasys.com>
Cc: Gleb Natapov <gleb@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-06-18 16:58:43 +02:00
Sanjay Lal
253fffe725 hw/mips: Add API to convert KVM guest KSEG0 <-> GPA
Add API for converting physical addresses to KVM guest KSEG0 addresses,
and fix the existing API for converting KSEG0 addresses to physical
addresses to work in the KVM case. Both have the same sized KSEG0, so
it's just a case of fixing the mask.

In KVM trap and emulate mode both the guest kernel and guest userspace
execute in useg:
    Guest User address space:   0x00000000..0x3fffffff
    Guest Kernel Unmapped:      0x40000000..0x5fffffff
    Guest Kernel Mapped:        0x60000000..0x7fffffff

Signed-off-by: Sanjay Lal <sanjayl@kymasys.com>
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-06-18 16:58:10 +02:00
Paolo Bonzini
feca4ac18b memory: MemoryRegion: rename parent to container
Avoid confusion with the QOM parent.

Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-06-18 15:32:50 +02:00
Paolo Bonzini
3eff1f46f0 virtio-scsi: add support for the any_layout feature
Store the request and response headers by value, and let
virtio_scsi_parse_req check that there is only one of datain
and dataout.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-06-18 08:47:11 +02:00
Paolo Bonzini
519661ee65 util: add return value to qemu_iovec_concat_iov
This will be necessary later to recognize the case where a
request has both dataout and datain.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-06-18 08:47:10 +02:00
Alexey Kardashevskiy
b9e77bc718 scsi: Print command name in debug
This makes scsi_command_name() public.

This makes use of scsi_command_name() in debug output for scsi-disk and
spapr-vscsi host bus adapter. Before this, SCSI used to print hex numbers
instead of human-friendly strings.

This adds GET_EVENT_STATUS_NOTIFICATION and READ_DISC_INFORMATION to
the list of SCSI commands supported by scsi_command_name().

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-06-18 08:47:10 +02:00
Hu Tao
20cfe8810d exec: introduce qemu_ram_unset_idstr() to unset RAMBlock idstr
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-06-17 16:07:37 +02:00
Peter Maydell
af44da87e9 Patch queue for ppc - 2014-06-16
This pull request brings a lot of fun things. Among others we have
 
   - e500: u-boot firmware support
   - sPAPR: magic page enablement
   - sPAPR: add "compat" CPU option to support older guests
   - sPAPR: refactorings in preparation for VFIO
   - POWER8 live migration
   - mac99: expose bus frequency
   - little endian core dump, gdb and disas support
   - new ppc64le-linux-user target
   - DFP emulation
   - bug fixes
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.19 (GNU/Linux)
 
 iQIcBAABAgAGBQJTntTgAAoJECszeR4D/txgvNoP/R9HooeweYnZYQxuTTxCIyPZ
 if1KRWj6S3jaZ74RwY7kjqYiBUKzNhqpA068v1QS/8ETjPc44V5RMKVOYoGeLNZz
 DiZ+BGIp6OSAW3zILFejdi2h7H86qESu7ZFSHZli7eUVg58JUVcnsrFrqMo5ojhY
 ICDbeDTitHkBESx7d93bUpecA535433FFylX1ueSj4FFeIpdhlCQsSZbal4FhxqY
 74ra4phwAfHlh28K286ZCduLKih77V5dZlroT89apI2eammD+jvXeewvmYtflcQu
 j/0FScSVOAplf0wqlPYM0+JAqbaX9o8ZLfzrMV+80ODdDKSFyGKeMo/PrOKJPtpk
 EibFNt67nJ30yGhmVsylsQxHVsmWFumcomA0kDdGLmj4A6mqLWM/7w3PGB1pJTPS
 bMvMz6O3B/ebk3wXZaMklcjLCLxCBqdYDG0/h7d+gpBLwqnF1Qgi4vv7g+MeKWtf
 Z5qJvUMzaAK6LJbDqOIqYhLCtvv2eYHNqvvjkaSRD5SkRzWnzzmmB+3xfjkLllbM
 C9DmcQVL4mh7SL3ELjcX7NT4rC+TWRu/el1eAreMjZT8pUyAbjyOkNGbLMqthaM7
 kzrSPc9QMzLmIJPrbH9unCuTf9NP5cUndtCL3kEAkl3FPm4kqiwVvh2WSeYCa0uw
 1PvTu0HNT/5NcvOkq/5L
 =hi5L
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/agraf/tags/signed-ppc-for-upstream' into staging

Patch queue for ppc - 2014-06-16

This pull request brings a lot of fun things. Among others we have

  - e500: u-boot firmware support
  - sPAPR: magic page enablement
  - sPAPR: add "compat" CPU option to support older guests
  - sPAPR: refactorings in preparation for VFIO
  - POWER8 live migration
  - mac99: expose bus frequency
  - little endian core dump, gdb and disas support
  - new ppc64le-linux-user target
  - DFP emulation
  - bug fixes

# gpg: Signature made Mon 16 Jun 2014 12:28:32 BST using RSA key ID 03FEDC60
# gpg: Can't check signature: public key not found

* remotes/agraf/tags/signed-ppc-for-upstream: (156 commits)
  spapr_pci: Advertise MSI quota
  PPC: KVM: Make pv hcall endian agnostic
  powerpc: use float64 for frsqrte
  spapr: Add kvm-type property
  spapr: Create SPAPRMachine struct
  linux-user: Tell guest about big host page sizes
  spapr_hcall: Add address-translation-mode-on-interrupt resource in H_SET_MODE
  spapr_hcall: Split h_set_mode()
  target-ppc: Enable DABRX SPR and limit it to <=POWER7
  target-ppc: Enable PPR and VRSAVE SPRs migration
  target-ppc: Add POWER8's Event Based Branch (EBB) control SPRs
  KVM: target-ppc: Enable TM state migration
  target-ppc: Add POWER8's TM SPRs
  target-ppc: Add POWER8's MMCR2/MMCRS SPRs
  target-ppc: Enable FSCR facility check for TAR
  target-ppc: Add POWER8's FSCR SPR
  target-ppc: Add POWER8's TIR SPR
  target-ppc: Refactor class init for POWER7/8
  target-ppc: Switch POWER7/8 classes to use correct PMU SPRs
  target-ppc: Make use of gen_spr_power5p_lpar() for POWER7/8
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-06-16 18:26:21 +01:00
Badari Pulavarty
9dbae97723 spapr_pci: Advertise MSI quota
Hotplug of multiple disks fails due to MSI vector quota check.
Number of MSI vectors default to 8 allowing only 4 devices.
This happens on RHEL6.5 guest. RHEL7 and SLES11 guests fallback
to INTX.

One way to workaround the issue is to increase total MSIs,
so that MSI quota check allows us to hotplug multiple disks.

This sets the quota to the maximum number of interupts XICS has
which is 1024 now (XICS_IRQS). This moves XICS_IRQS from spapr.c
to xics.h for wider visibility.

Signed-off-by: Badari Pulavarty <pbadari@us.ibm.com>
[aik: put XICS_IRQS=1024 instead of 64i, fixed endianness and size]
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
2014-06-16 13:24:46 +02:00
Alexey Kardashevskiy
d5ac4f5433 spapr_hcall: Add address-translation-mode-on-interrupt resource in H_SET_MODE
This adds handling of the RESOURCE_ADDR_TRANS_MODE resource from
the H_SET_MODE, for POWER8 (PowerISA 2.07) only.

This defines AIL flags for LPCR special register.

This changes @excp_prefix according to the mode, takes effect in TCG.

This turns support of a new capability PPC2_ISA207S flag for TCG.

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
2014-06-16 13:24:45 +02:00
Doug Kwan
d90b94cd78 target-ppc: Support little-endian PPC64 in user mode.
Look at ELF header to determine ABI version on PPC64.  This is required
for executing the first instruction correctly.  Also print correct machine
name in uname() system call.

Signed-off-by: Doug Kwan <dougkwan@google.com>
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
2014-06-16 13:24:40 +02:00
Alexey Kardashevskiy
1b8eceee28 spapr_iommu: Introduce bus_offset in sPAPRTCETable
This adds @bus_offset into sPAPRTCETable to tell where TCE table starts
from. It is set to 0 for emulated devices. Dynamic DMA windows will use
other offset.

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
2014-06-16 13:24:39 +02:00
Alexey Kardashevskiy
650f33adbd spapr_iommu: Introduce page_shift in sPAPRTCETable
At the moment only 4K pages are supported by sPAPRTCETable. Since sPAPR
spec allows other page sizes and we are going to implement them, we need
page size to be configrable.

This adds @page_shift into sPAPRTCETable and replaces SPAPR_TCE_PAGE_SHIFT
with it where it is possible.

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
2014-06-16 13:24:39 +02:00
Alexey Kardashevskiy
523e7b8ab8 spapr_iommu: Get rid of window_size in sPAPRTCETable
This removes window_size as it is basically a copy of nb_table
shifted by SPAPR_TCE_PAGE_SHIFT. As new dynamic DMA windows are
going to support windows as big as the entire RAM and this number
will be bigger that 32 capacity, we will have to do something
about @window_size anyway and removal seems to be the right way to go.

This removes dma_window_start/dma_window_size from sPAPRPHBState as
they are no longer used.

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
2014-06-16 13:24:39 +02:00
Alexey Kardashevskiy
e28c16f61f spapr_pci: Allow multiple TCE tables per PHB
At the moment sPAPRPHBState contains a @tcet pointer to the only
TCE table. However sPAPR spec allows having more than one DMA window.

Since the TCE object is already a child of SPAPR PHB object, there is
no need to keep an additional pointer to it in sPAPRPHBState so remove it.

This changes the way sPAPRPHBState::reset performs reset of sPAPRTCETable
objects.

This changes the default DMA window properties calculation.

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
2014-06-16 13:24:39 +02:00
Alexey Kardashevskiy
cca7fad576 spapr_pci: spapr_iommu: Make DMA window a subregion
Currently the default DMA window is represented by a single MemoryRegion.
However there can be more than just one window so we need
a "root" memory region to be separated from the actual DMA window(s).

This introduces a "root" IOMMU memory region and adds a subregion for
the default DMA 32bit window. Following patches will add other
subregion(s).

This initializes a default DMA window subregion size to the guest RAM
size as this window can be switched into "bypass" mode which implements
direct DMA mapping.

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
2014-06-16 13:24:39 +02:00
Alexey Kardashevskiy
da6ccee418 spapr_pci: Introduce a finish_realize() callback
The spapr-pci PHB initializes IOMMU for emulated devices only.
The upcoming VFIO support will do it different. However both emulated
and VFIO PHB types share most of the initialization code.
For the type specific things a new finish_realize() callback is
introduced.

This introduces sPAPRPHBClass derived from PCIHostBridgeClass and
adds the callback pointer.

This implements finish_realize() for emulated devices.

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
[agraf: Fix compilation]
Signed-off-by: Alexander Graf <agraf@suse.de>
2014-06-16 13:24:39 +02:00
Alexander Graf
3e300fa6ad macio ide: Do remainder access asynchronously
The macio IDE controller has some pretty nasty magic in its implementation to
allow for unaligned sector accesses. We used to handle these accesses
synchronously inside the IO callback handler.

However, the block infrastructure changed below our feet and now it's impossible
to call a synchronous block read/write from the aio callback handler of a
previous block access.

Work around that limitation by making the unaligned handling bits also go
through our asynchronous handler.

This fixes booting Mac OS X for me.

Reported-by: John Arbuckle <programmingkidx@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
2014-06-16 13:24:38 +02:00
Alexey Kardashevskiy
2a6593cb6a spapr: Add ibm, client-architecture-support call
The PAPR+ specification defines a ibm,client-architecture-support (CAS)
RTAS call which purpose is to provide a negotiation mechanism for
the guest and the hypervisor to work out the best compatibility parameters.
During the negotiation process, the guest provides an array of various
options and capabilities which it supports, the hypervisor adjusts
the device tree and (optionally) reboots the guest.

At the moment the Linux guest calls CAS method at early boot so SLOF
gets called. SLOF allocates a memory buffer for the device tree changes
and calls a custom KVMPPC_H_CAS hypercall. QEMU parses the options,
composes a diff for the device tree, copies it to the buffer provided
by SLOF and returns to SLOF. SLOF updates the device tree and returns
control to the guest kernel. Only then the Linux guest parses the device
tree so it is possible to avoid unnecessary reboot in most cases.

The device tree diff is a header with an update format version
(defined as 1 in this patch) followed by a device tree with the properties
which require update.

If QEMU detects that it has to reboot the guest, it silently does so
as the guest expects reboot to happen because this is usual pHyp firmware
behavior.

This defines custom KVMPPC_H_CAS hypercall. The current SLOF already
has support for it.

This implements stub which returns very basic tree (root node,
no properties) to the guest.

As the return buffer does not contain any change, no change in behavior is
expected.

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
2014-06-16 13:24:37 +02:00
Bharata B Rao
acb0ef5801 dump: Make DumpState and endian conversion routines available for arch-specific dump code
Make DumpState and endian conversion routines available for arch-specific dump
code by moving into dump.h. DumpState will be needed by arch-specific dump
code to access target endian information from DumpState->ArchDumpInfo. Also
break the dependency of dump.h from stubs/dump.c by creating a separate
dump-arch.h.

This patch doesn't change any functionality.

Signed-off-by: Bharata B Rao <bharata@linux.ibm.com>
[ rebased on top of current master branch,
  renamed endian helpers to cpu_to_dump{16,32,64},
  pass a DumpState * argument to endian helpers,
  Greg Kurz <gkurz@linux.vnet.ibm.com> ]
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
[agraf: fix to apply]
Signed-off-by: Alexander Graf <agraf@suse.de>
2014-06-16 13:24:36 +02:00
Alexey Kardashevskiy
98a8b52442 spapr: Add support for time base offset migration
This allows guests to have a different timebase origin from the host.

This is needed for migration, where a guest can migrate from one host
to another and the two hosts might have a different timebase origin.
However, the timebase seen by the guest must not go backwards, and
should go forwards only by a small amount corresponding to the time
taken for the migration.

This is only supported for recent POWER hardware which has the TBU40
(timebase upper 40 bits) register. That includes POWER6, 7, 8 but not
970.

This adds kvm_access_one_reg() to access a special register which is not
in env->spr. This requires kvm_set_one_reg/kvm_get_one_reg patch.

The feature must be present in the host kernel.

This bumps vmstate_spapr::version_id and enables new vmstate_ppc_timebase
only for it. Since the vmstate_spapr::minimum_version_id remains
unchanged, migration from older QEMU is supported but without
vmstate_ppc_timebase.

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
2014-06-16 13:24:35 +02:00
Tom Musta
bfd8f5b754 util: Add InvMixColumns
This patch adds the table implementation of the Advanced Encryption Standard (AES)
InvMixColumns transformation.

The patch is intentionally asymmetrical -- the MixColumns table is not added because
there is no known use for it at this time.

Signed-off-by: Tom Musta <tommusta@gmail.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
2014-06-16 13:24:33 +02:00
Tom Musta
1c1a6d20e0 util: Add AES ShiftRows and InvShiftRows Tables
This patch adds tables that implement the Advanced Encryption Standard (AES) ShiftRows
and InvShiftRows transformations.  These are commonly used in instruction models.

Signed-off-by: Tom Musta <tommusta@gmail.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
2014-06-16 13:24:33 +02:00
Tom Musta
40c84b54dd util: Add S-Box and InvS-Box Arrays to Common AES Utils
This patch adds tables for the S-Box and InvS-Box transformations commonly used by various
Advanced Encription Standard (AES) instruction models.

Signed-off-by: Tom Musta <tommusta@gmail.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
2014-06-16 13:24:33 +02:00
Tom Musta
79af357225 libdecnumber: Introduce decNumberIntegralToInt64
Introduce a new conversion function to the libdecnumber library.
This function converts a decNumber to a signed 64-bit integer.
In order to support 64-bit integers (which may have up to 19
decimal digits), the existing "powers of 10" array is expanded
from 10 to 19 entries.

Signed-off-by: Tom Musta <tommusta@gmail.com>
[agraf: fix 32bit host compile]
Signed-off-by: Alexander Graf <agraf@suse.de>
2014-06-16 13:24:29 +02:00
Tom Musta
8e706db21e libdecnumber: Introduce decNumberFrom[U]Int64
Introduce two conversion functions to the libdecnumber library.
These conversions transform 64 bit integers to the internal decNumber
representation.  Both a signed and unsigned version is added.

Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
2014-06-16 13:24:29 +02:00
Tom Musta
9b7a14b064 libdecnumber: Change gstdint.h to stdint.h
Replace the inclusion of gstdint.h with the standard stdint.h
header file.

Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
2014-06-16 13:24:28 +02:00
Tom Musta
7275585b8c libdecnumber: Modify dconfig.h to Integrate with QEMU
Modify the dconfig.h header file so that libdecnumber code integrates QEMU
configuration.   Specifically:

  - the WORDS_BIGENDIAN preprocessor macro is used in libdecnumber code to
    determines endianness.  It is derived from the existing QEMU macro
    HOST_WORDS_BIGENDIAN which is defined in config-host.h.

  - the DECPUN macro determines the number of decimal digits (aka declets) per
    unit (byte).  This is 3 for PowerPC DFP.

Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
2014-06-16 13:24:28 +02:00
Tom Musta
0f2d373220 libdecnumber: Prepare libdecnumber for QEMU include structure
Consistent with other libraries in QEMU, the libdecnumber header files were
placed in include/libdecnumber, separate from the C code.  This is different
from the original libdecnumber source, where they were co-located.

Change the libdecnumber source code so that it reflects this split.  Specifically,
modify directives of the form:

    #include "xxx.h"

to look like:

    #include "libdecnumber/xxx.h"

Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
2014-06-16 13:24:28 +02:00
Tom Musta
f5d7f14646 libdecnumber: Eliminate #include *Symbols.h
The various *Symbols.h files were not copied from the original GCC libdecnumber
library; they are not necessary for use in QEMU.  Remove all instances of

    #include "*Symbols.h"

Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
2014-06-16 13:24:28 +02:00
Tom Musta
72ac97cdfc libdecnumber: Introduce libdecnumber Code
Add files from the libdecnumber decimal floating point library to QEMU.  The libdecnumber
library was originally part of GCC and contains code that is useful in emulating the PowerPC
decimal floating point (DFP) instructions.  This particular copy of the source comes from
GCC 4.3 and is licensed at GPLv2+.

Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
2014-06-16 13:24:28 +02:00
BALATON Zoltan
9d1c128341 mac99: Added FW_CFG_PPC_BUSFREQ to match CLOCKFREQ and TBFREQ already there
While there, also moved the hard coded value for CLOCKFREQ to a #define.

Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Alexander Graf <agraf@suse.de>
2014-06-16 13:24:28 +02:00
Chunyan Liu
98d896d978 QemuOpts: cleanup tmp 'allocated' member from QemuOptsList
Now only qemu_opts_append uses 'allocated' to indicate free memory.
For this function only, we can also let result list's (const char *)
members point to input list's members, only if the input list has
longer lifetime than result list. In current code, that is true.
So, we can remove the 'allocated' member from QemuOptsList definition
to keep code clean.

Signed-off-by: Chunyan Liu <cyliu@suse.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-06-16 17:23:21 +08:00
Chunyan Liu
c282e1fdf7 cleanup QEMUOptionParameter
Now that all backend drivers are using QemuOpts, remove all
QEMUOptionParameter related codes.

Signed-off-by: Dong Xu Wang <wdongxu@linux.vnet.ibm.com>
Signed-off-by: Chunyan Liu <cyliu@suse.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-06-16 17:23:21 +08:00
Chunyan Liu
74c3c19765 QemuOpts: export qemu_opt_find
Export qemu_opt_find for qcow2 driver using it.
After replacing QEMUOptionParameter with QemuOpts, qcow2 driver will
use qemu_opt_find to judge if an option is explicitly set, to replace
the usage of .assigned in QEMUOptionParameter.

Signed-off-by: Chunyan Liu <cyliu@suse.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-06-16 17:23:21 +08:00
Chunyan Liu
83d0521a1e change block layer to support both QemuOpts and QEMUOptionParamter
Change block layer to support both QemuOpts and QEMUOptionParameter.
After this patch, it will change backend drivers one by one. At the end,
QEMUOptionParameter will be removed and only QemuOpts is kept.

Signed-off-by: Dong Xu Wang <wdongxu@linux.vnet.ibm.com>
Signed-off-by: Chunyan Liu <cyliu@suse.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-06-16 17:23:20 +08:00
Chunyan Liu
a1097a2614 QemuOpts: add qemu_opts_append to replace append_option_parameters
For later merge .create_opts of drv and proto_drv in qemu-img commands.

Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Leandro Dorileo <l@dorileo.org>
Signed-off-by: Chunyan Liu <cyliu@suse.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-06-16 17:23:20 +08:00
Chunyan Liu
8559e45e51 QemuOpts: add conversion between QEMUOptionParameter to QemuOpts
Add two temp conversion functions between QEMUOptionParameter to QemuOpts,
so that next patch can use it. It will simplify later patch for easier
review. And will be finally removed after all backend drivers switch to
QemuOpts.

Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Leandro Dorileo <l@dorileo.org>
Signed-off-by: Chunyan Liu <cyliu@suse.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-06-16 17:23:20 +08:00
Chunyan Liu
504189a96f QemuOpts: add qemu_opts_print_help to replace print_option_help
print_option_help takes QEMUOptionParameter as parameter, add
qemu_opts_print_help to take QemuOptsList as parameter for later
replace work.

Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Leandro Dorileo <l@dorileo.org>
Signed-off-by: Dong Xu Wang <wdongxu@linux.vnet.ibm.com>
Signed-off-by: Chunyan Liu <cyliu@suse.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-06-16 17:23:20 +08:00
Chunyan Liu
782730b0bc QemuOpts: add qemu_opt_get_*_del functions for replace work
Add qemu_opt_get_del, qemu_opt_get_bool_del, qemu_opt_get_number_del and
qemu_opt_get_size_del to replace the same handling of QEMUOptionParameter
(get and delete).

Several drivers are coded to parse a known subset of options, then
remove them from the list before handing all remaining options to a
second driver for further option processing.  get_*_del makes it easier
to retrieve a known option (or its default) and remove it from the list
all in one action.

Share common helper function:

For qemu_opt_get_bool/size/number, they and their get_*_del counterpart
could share most of the code except whether or not deleting the opt from
option list, so generate common helper functions.

For qemu_opt_get and qemu_opt_get_del, keep code duplication, since
1. qemu_opt_get_del returns malloc'd memory while qemu_opt_get returns
in-place memory
2. qemu_opt_get_del returns (char *), qemu_opt_get returns (const char *),
and could not change to (char *), since in one case, it will return
desc->def_value_str, which is (const char *).

Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Dong Xu Wang <wdongxu@linux.vnet.ibm.com>
Signed-off-by: Chunyan Liu <cyliu@suse.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-06-16 17:23:20 +08:00
Chunyan Liu
dc8622f2bf QemuOpts: change opt->name|str from (const char *) to (char *)
qemu_opt_del() already assumes that all QemuOpt instances contain
malloc'd name and value; but it had to cast away const because
opts_start_struct() was doing its own thing and using static storage
instead.  By using the correct type and malloced strings everywhere, the
usage of this struct becomes clearer.

Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Leandro Dorileo <l@dorileo.org>
Signed-off-by: Chunyan Liu <cyliu@suse.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-06-16 17:23:20 +08:00
Chunyan Liu
09722032e1 QemuOpts: add def_value_str to QemuOptDesc
Add def_value_str (default value) to QemuOptDesc, to replace function of the
default value in QEMUOptionParameter.

Improve qemu_opts_get_* functions: if find opt, return opt->str; otherwise,
if desc->def_value_str is set, return desc->def_value_str; otherwise, return
input defval.

Improve qemu_opts_print: if option is set, print opt->str; otherwise, if
desc->def_value_str is set, print it.

Signed-off-by: Dong Xu Wang <wdongxu@linux.vnet.ibm.com>
Signed-off-by: Chunyan Liu <cyliu@suse.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-06-16 17:23:20 +08:00
Chunyan Liu
e67905426b QemuOpts: repurpose qemu_opts_print to replace print_option_parameters
Currently this function is not used anywhere. In later patches, it will
replace print_option_parameters. To avoid print info changes, change
qemu_opts_print from fprintf stderr to printf, and remove last printf.

Signed-off-by: Chunyan Liu <cyliu@suse.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-06-16 17:23:19 +08:00
Markus Armbruster
ae60e8e378 blockdev: Remove unused DriveInfo reference count
It's always one since commit fa510eb dropped the last drive_get_ref().

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-06-16 17:23:19 +08:00
Markus Armbruster
60e19e06a4 blockdev: Rename drive_init(), drive_uninit() to drive_new(), drive_del()
"Init" and "uninit" suggest the functions don't allocate / free
storage.  But they do.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-06-16 17:23:19 +08:00
Gerd Hoffmann
5643fc012c spice: add mouse cursor support
So you'll have a mouse pointer when running non-qxl gfx cards with
mouse pointer support (virtio-gpu, IIRC vmware too).

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-06-13 12:34:57 +02:00
Peter Maydell
05fedeef83 Merge remote-tracking branch 'remotes/qmp-unstable/queue/qmp' into staging
* remotes/qmp-unstable/queue/qmp:
  json-parser: drop superfluous assignment for token variable
  readline: Clear screen on form feed.
  monitor: Add delvm and loadvm argument completion
  monitor: Add host_net_remove arguments completion
  readline: Make completion strings always unique
  monitor: Add host_net_add device argument completion
  net: Export valid host network devices list
  monitor: Add migrate_set_capability completion
  monitor: Add watchdog_action argument completion
  monitor: Add ringbuf_write and ringbuf_read argument completion
  dump: simplify get_len_buf_out()
  dump: hoist lzo_init() from get_len_buf_out() to dump_init()
  dump: select header bitness based on ELF class, not ELF architecture
  dump: eliminate DumpState.page_size ("guest's page size")
  dump: eliminate DumpState.page_shift ("guest's page shift")
  dump: simplify write_start_flat_header()
  dump: fill in the flat header signature more pleasingly to the eye

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-06-11 21:34:08 +01:00
Peter Maydell
706808585a bsd-user queue:
* build fixes
  * improvements to strace
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABCAAGBQJTmGZsAAoJEDwlJe0UNgzeW8cQAJlCKVtlfTJD+EFdHP7vbs/z
 1qYoWWGAg3fT81lfJ7Dg1JjwFEzHAGmKLIAZLrmLt6MhxrWQEGYPMSW6TUZJhY2v
 JTPJdxoItUn1D0+yw0NX8Y8Cmx7v2rDz7mAxsyvzjmBYv7Nor6j7iff8rAj+5VlU
 38c4VepWsuD/0hYcu9x+jgF2dMXp5YLWEdzBffbhIHefd3eLYE6SPIM1U7hlBeUN
 iyO9D+/teN61i0fF+Cmgt+pYH9OZjsr+Ood35EhOb4PjYh/nhlY7VJ0dVKtOZnS8
 2yJUi3D2Xg/9teb4d0I3dtc4KcSzNRTOBChBimXtUGI+baKpQjey3kVb+aqt/tGQ
 3eIKB3A7F/GJKhadJu0YtDKok8fq3n6o28NXyQIhLu/EZdBYoEUNLNPC6O1aMcqm
 5d6PLYMz1SHHHFLCxR8KImj98aqjLBlf7JL/5NbaYsTf/lLKOwNjGpIYNZyB8I+1
 Wi7zVhdLNXJSwRBRLL+OBD/21nZCAzkDVjx5/27XIWNzTV4LyM/Srq3T6ZLkhWa6
 lFJDsnBQYmspAyNhIZj3Y0c9/WLkxC+17eby75TAK87EFv3TLCUIHsOvvsVSWnBV
 HoD3STxCqYadk4ZXmaWv/9Bo2OEvn/Oh77+SJlWdyXQogelZcVuGP5vjs1SxMzMy
 uILFn94Dc+3tmnezU0zM
 =yKuf
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/pmaydell/tags/pull-bsd-user-20140611' into staging

bsd-user queue:
 * build fixes
 * improvements to strace

# gpg: Signature made Wed 11 Jun 2014 15:23:40 BST using RSA key ID 14360CDE
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>"

* remotes/pmaydell/tags/pull-bsd-user-20140611:
  bsd-user: Fix syscall format, add strace support for more syscalls
  bsd-user: Implement strace support for thr_* syscalls
  bsd-user: Implement strace support for extattr_* syscalls
  bsd-user: Implement strace support for __acl_* syscalls
  bsd-user: Implement strace support for print_ioctl syscall
  bsd-user: Implement strace support for print_sysctl syscall
  bsd-user: GPL v2 attribution update and style
  bsd-user: add HOST_VARIANT_DIR for various *BSD dependent code
  exec: replace ffsl with ctzl
  vhost: replace ffsl with ctzl
  xen: replace ffsl with ctzl
  util/qemu-openpty: fix build with musl libc by include termios.h as fallback
  bsd-user/mmap.c: Don't try to override g_malloc/g_free
  util/hbitmap.c: Use ctpopl rather than reimplementing a local equivalent
  bsd-user: refresh freebsd system call numbers

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-06-11 18:05:21 +01:00
Hani Benhabiles
84007e8181 net: Export valid host network devices list
Signed-off-by: Hani Benhabiles <hani@linux.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2014-06-11 10:10:29 -04:00
Hani Benhabiles
8e5977797d monitor: Add ringbuf_write and ringbuf_read argument completion
Export chr_is_ringbuf() function. Also remove left-over function prototypes
while at it.

Signed-off-by: Hani Benhabiles <hani@linux.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2014-06-11 10:10:28 -04:00
Laszlo Ersek
22227f121b dump: eliminate DumpState.page_shift ("guest's page shift")
Just use TARGET_PAGE_BITS.

"DumpState.page_shift" used to have type "uint32_t", while the replacement
TARGET_PAGE_BITS has type "int". Since "DumpState.page_shift" was only
used as bit shift counts in the paddr_to_pfn() and pfn_to_paddr() macros,
this is safe.

Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2014-06-11 10:10:28 -04:00
Natanael Copa
7224f66ec3 exec: replace ffsl with ctzl
See commit fbeadf50 (bitops: unify bitops_ffsl with the one in
host-utils.h, call it bitops_ctzl) on why ctzl should be used instead
of ffsl.

This is also needed for musl libc which does not implement ffsl.

Signed-off-by: Natanael Copa <ncopa@alpinelinux.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-06-11 00:25:06 +01:00
Michael Tokarev
86946a2d83 glib-compat.h: add new thread API emulation on top of pre-2.31 API
Thread API changed in glib-2.31 significantly.  Before that version,
conditionals and mutexes were only allocated dynamically, using
_new()/_free() interface.  in 2.31 and up, they're allocated statically
as regular variables, and old interface is deprecated.

(Note: glib docs says the new interface is available since version
2.32, but it was actually introduced in version 2.31).

Create the new interface using old primitives, by providing non-opaque
definitions of the base types (GCond and GMutex) using GOnces.

Replace #ifdeffery around GCond and GMutex in trace/simple.c and
coroutine-gthread.c too because it does not work anymore with the new
glib-compat.h.

Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
[Use GOnce to support lazy initialization; introduce CompatGMutex
 and CompatGCond.  - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-06-10 07:44:01 +02:00
Peter Maydell
5dfc05cb1d Block pull request
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJTkeeSAAoJEJykq7OBq3PIi9sIAIKVSHE/c6Tc4rGcIgPoAXTS
 li9FCQ/vXFUehIe6MFMmf6OX08zKxBw18DLS6mLyqAn5lJGUWQBXiP+nXqgzhy5T
 EoCtwE/n5fpbQuCVxXm+CsaGZc4IySyZ4FiwqAe4MysYKXkJbDGEF/TEzL+0vFw4
 wEHZUQ3ykydJtPLtZVI3MNRmqRtk7zbq8So6g/FYB3VyIeyhMp1peWahHPLXGOQ/
 phpk5G4Yk6p8TtjTe6lo4ajBzAprsxc052Jz+MaxbuihzfHjf2i62iLixcDDTUzz
 6n/sCVsvorA6O6SJ/sMtkQs1N1cXoj3tKSIu8gh6zkAtlg/V6sSRaLCnQQtFQB4=
 =xvq7
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/stefanha/tags/block-pull-request' into staging

Block pull request

# gpg: Signature made Fri 06 Jun 2014 17:08:50 BST using RSA key ID 81AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>"
# gpg:                 aka "Stefan Hajnoczi <stefanha@gmail.com>"

* remotes/stefanha/tags/block-pull-request: (42 commits)
  qapi: Extract qapi/block.json definitions
  qapi: Extract qapi/block-core.json definitions
  qapi: create two block related json modules
  qapi: Extract qapi/common.json definitions
  sheepdog: reload only header in a case of live snapshot
  sheepdog: fix vdi object update after live snapshot
  rbd: Fix leaks in rbd_start_aio() error path
  qemu-img: Document check exit codes
  block: fix wrong order in live block migration setup
  blockdev: acquire AioContext in block_set_io_throttle
  throttle: add detach/attach test case
  throttle: add throttle_detach/attach_aio_context()
  dataplane: Support VIRTIO_BLK_T_SCSI_CMD
  virtio-blk: Factor out virtio_blk_handle_scsi_req from virtio_blk_handle_scsi
  virtio-blk: Allow config-wce in dataplane
  block: Move declaration of bdrv_get_aio_context to block.h
  raw-posix: drop raw_get_aio_fd() since it is no longer used
  dataplane: implement async flush
  dataplane: delete IOQueue since it is no longer used
  dataplane: use the QEMU block layer for I/O
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-06-09 11:54:22 +01:00
Peter Maydell
26edf8cc08 pc,pci,virtio,qdev fixes, tests
new tests for SMBIOS
 SMBIOS fixes
 pc, pci fixes
 qdev patches stayed on list for a month with no review,
 as I told people on KVM forum I'm merging stuch patches
 if they look fine.
 
 Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJTkJ2iAAoJECgfDbjSjVRpk4oIALf6RC/Bm3bVaX5TSgqdt8UT
 4vCf10V53KkbfhxN9dGyPluswz/gyY7M/nrOoi0BSbrQndSavgyNRCfMfBfIw1FO
 yvfeyrkBkKBP4ViF6uogcSr79h3vQaXsqZIGmZUsdv3ZfVrLS+7dKsigVI6PumNR
 8YBveGljFjn0nrCC2+M2+LDefcPGSEu9vea9hKER0uPuz1mib8otjm1PAH30QeW/
 9q1bwFEwobFJk32vrayQrwGk5ECXCCHR8LPV1Rv9tyZLEqAbdiNrwGb4MycztLvK
 UHuvNFNqUHKNe/tqvp1RPmWOY2aO8+u0570kc8nhXXq2/tjJTOCmQfmodE6hh8A=
 =bwmA
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging

pc,pci,virtio,qdev fixes, tests

new tests for SMBIOS
SMBIOS fixes
pc, pci fixes
qdev patches stayed on list for a month with no review,
as I told people on KVM forum I'm merging stuch patches
if they look fine.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

* remotes/mst/tags/for_upstream:
  qdev: Add test of qdev_prop_check_global
  qdev: Display warning about unused -global
  tests: add smbios testing
  tests: rename acpi-test to bios-tables-test
  virtio-balloon: return empty data when no stats are available
  pcie_host: Turn pcie_host_init() into an instance_init
  SMBIOS: Fix type 17 field sizes
  SMBIOS: Update Type 0 struct generator for machines >= 2.1
  SMBIOS: Fix endian-ness when populating multi-byte fields
  serial-pci: Set prog interface field of pci config to 16550 compatible

Conflicts:
	include/hw/i386/pc.h
[PMM: fixed trivial conflict in pc.h]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-06-05 21:52:37 +01:00
Peter Maydell
31e25e3e57 Merge remote-tracking branch 'remotes/bonzini/softmmu-smap' into staging
* remotes/bonzini/softmmu-smap: (33 commits)
  target-i386: cleanup x86_cpu_get_phys_page_debug
  target-i386: fix protection bits in the TLB for SMEP
  target-i386: support long addresses for 4MB pages (PSE-36)
  target-i386: raise page fault for reserved bits in large pages
  target-i386: unify reserved bits and NX bit check
  target-i386: simplify pte/vaddr calculation
  target-i386: raise page fault for reserved physical address bits
  target-i386: test reserved PS bit on PML4Es
  target-i386: set correct error code for reserved bit access
  target-i386: introduce support for 1 GB pages
  target-i386: introduce do_check_protect label
  target-i386: tweak handling of PG_NX_MASK
  target-i386: commonize checks for PAE and non-PAE
  target-i386: commonize checks for 4MB and 4KB pages
  target-i386: commonize checks for 2MB and 4KB pages
  target-i386: fix coding standards in x86_cpu_handle_mmu_fault
  target-i386: simplify SMAP handling in MMU_KSMAP_IDX
  target-i386: fix kernel accesses with SMAP and CPL = 3
  target-i386: move check_io helpers to seg_helper.c
  target-i386: rename KSMAP to KNOSMAP
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-06-05 21:06:14 +01:00
Don Slutz
9f9260a3be qdev: Display warning about unused -global
This can help a user understand why -global was ignored.

For example: with "-vga cirrus"; "-global vga.vgamem_mb=16" is just
ignored when "-global cirrus-vga.vgamem_mb=16" is not.

This is currently clear when the wrong property is provided:

out/x86_64-softmmu/qemu-system-x86_64 -global cirrus-vga.vram_size_mb=16 -monitor pty -vga cirrus
char device redirected to /dev/pts/20 (label compat_monitor0)
qemu-system-x86_64: Property '.vram_size_mb' not found
Aborted (core dumped)

vs

out/x86_64-softmmu/qemu-system-x86_64 -global vga.vram_size_mb=16 -monitor pty -vga cirrus
char device redirected to /dev/pts/20 (label compat_monitor0)
VNC server running on `::1:5900'
^Cqemu: terminating on signal 2

Signed-off-by: Don Slutz <dslutz@verizon.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-05 19:20:37 +03:00
Paolo Bonzini
c773828aa9 softmmu: move all load/store functions to cpu_ldst.h
Unify pieces of cpu-all.h, exec-all.h, softmmu_exec.h and tcg/tcg.h
into a single new header file with all helpers.

Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-06-05 16:10:33 +02:00
Paolo Bonzini
f08b617018 softmmu: introduce cpu_ldst.h
This will collect all load and store helpers soon.  For now
it is just a replacement for softmmu_exec.h, which this patch
stops including directly, but we also include it where this will
be necessary in order to simplify the next patch.

Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-06-05 16:10:33 +02:00
Paolo Bonzini
58ed270df9 softmmu: move softmmu_template.h out of include/
It is only included in cputlb.c now.

Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-06-05 16:10:33 +02:00
Paolo Bonzini
0f590e749f softmmu: commonize helper definitions
They do not need to be in op_helper.c.  Because cputlb.c now includes
softmmu_template.h twice for each size, io_readX must be elided the
second time through.

Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-06-05 16:10:33 +02:00
Paolo Bonzini
93e22326d6 softmmu: make do_unaligned_access a method of CPU
We will reference it from more files in the next patch.  To avoid
ruining the small steps we're making towards multi-target, make
it a method of CPU rather than just a global.

Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-06-05 16:10:31 +02:00
Paolo Bonzini
ca0aa40816 softmmu: move definition of CPU_MMU_INDEX to inclusion site, drop ACCESS_TYPE
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-06-05 16:05:52 +02:00
Paolo Bonzini
a6c9eac0d5 softmmu: move MMUSUFFIX under SOFTMMU_CODE_ACCESS
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-06-05 16:05:47 +02:00
Paolo Bonzini
859d76120b softmmu: start introducing SOFTMMU_CODE_ACCESS in softmmu_header.h
This preprocessor symbol is already used in softmmu_template.h.  We
will use it to distinguish the two "fake" ACCESS_TYPEs
NB_MMU_MODES and NB_MMU_MODES + 1.

Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-06-05 16:05:27 +02:00
Stefan Hajnoczi
13af91ebf0 throttle: add throttle_detach/attach_aio_context()
Block I/O throttling uses timers and currently always adds them to the
main loop.  Throttling will break if bdrv_set_aio_context() is used to
move a BlockDriverState to a different AioContext.

This patch adds throttle_detach/attach_aio_context() interfaces so the
throttling timers and uses them to move timers to the new AioContext.
Note that bdrv_set_aio_context() already drains all requests so we're
sure no throttled requests are pending.

The test cases need to be updated since the throttle_init() interface
has changed.

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
2014-06-04 09:56:12 +02:00
Fam Zheng
5a05cbeeaa virtio-blk: Factor out virtio_blk_handle_scsi_req from virtio_blk_handle_scsi
The common logic to process a scsi request in a VirtQueueElement is
extracted to a function to share with dataplane.

This makes VirtIOBlockReq.scsi unused, so drop it.

Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-06-04 09:56:12 +02:00
Fam Zheng
db519cba87 block: Move declaration of bdrv_get_aio_context to block.h
block_int.h is for block layer and block drivers, other code shouldn't
include it. But similar to bdrv_set_aio_context, bdrv_get_aio_context
should also be accessible from outside of block layer.

Move it.

Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-06-04 09:56:12 +02:00
Stefan Hajnoczi
76ef2cf549 raw-posix: drop raw_get_aio_fd() since it is no longer used
virtio-blk data-plane now uses the QEMU block layer for I/O.  We do not
need raw_get_aio_fd() anymore.  It was a layering violation anyway, so
let's get rid of it.

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-06-04 09:56:12 +02:00
Stefan Hajnoczi
dcd042282d block: add bdrv_set_aio_context()
Up until now all BlockDriverState instances have used the QEMU main loop
for fd handlers, timers, and BHs.  This is not scalable on SMP guests
and hosts so we need to move to a model with multiple event loops on
different host CPUs.

bdrv_set_aio_context() assigns the AioContext event loop to use for a
particular BlockDriverState.  It first detaches the entire
BlockDriverState graph from the current AioContext and then attaches to
the new AioContext.

This function will be used by virtio-blk data-plane to assign a
BlockDriverState to its IOThread AioContext.  Make
bdrv_aio_set_context() public since data-plane should not include
block_int.h.

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-06-04 09:56:11 +02:00
Gerd Hoffmann
be1a717624 input: add support for kbd delays
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-06-04 08:40:41 +02:00
Peter Maydell
e00fcfeab3 VFIO patches: realtek NIC quirk + SPAPR IOMMU AddressSpace support
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJTjPBKAAoJECObm247sIsi0fkP/1q5o3ZwwgO8y1lO43P39rRL
 BzCoa3EHGt0kGn7dImxFhjHClqhyqJL1SpaVOVTdTOmlOL1VVGJ/+2UJ0W7gB/jU
 zSYdmnX2UD5KNUrECqcWr+twNn1LGNcs3SCeFoe2WMmoPwqGHYs9FJmn5eqD7c6k
 iF3HD9H9sm1TauQ9iaFlg695Ap9y+MXOECaocYyx10j5wVyo4yByugtfrGjs3pOA
 BzzbRb89NAY+tneRnMoiWD3TS5CPYpvhWmAIW988u+mJLXLaO7CS1E7qacxuFUdu
 y2Z+pPjp6qpr1ZNYgOXqlrcW6/2PocP2qvwXN/P/waxN5OjDmkrOnT7hU0FWtTwz
 qnhrsPzaqthat28mLA+Fd0VXKkoMnGVilZixj59sXMnTjA1lL0sM8HMuGu/JRDCl
 Nqz9Mc2xhxegUZ6gyuIVBqY7qTO3x8DiVPGCAe3m6qiyWnNOBu5oBjnoz1ns5M5H
 aeysil1tp5PUGM3KomLXL8slkoo6Tiu0rKRI8tzwSWJ6VS0vtv5JrKKGF5oaTSL7
 YslkbQExoHa03aquUbc6DpN1LG35oOPhIg+HbErfp/Mb9j042s28rgeQ+55RNEev
 uJW0G0F8PYWr8DtIlk7bmVX0bFU8bV3O/gxNeb3jmTNXhcObNvr2GviZQr6UezLW
 ax1Nt+EhOfquV2j8uuLR
 =rimn
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/awilliam/tags/vfio-pci-for-qemu-20140602.0' into staging

VFIO patches: realtek NIC quirk + SPAPR IOMMU AddressSpace support

# gpg: Signature made Mon 02 Jun 2014 22:44:42 BST using RSA key ID 3BB08B22
# gpg: Can't check signature: public key not found

* remotes/awilliam/tags/vfio-pci-for-qemu-20140602.0:
  vfio: Add guest side IOMMU support
  vfio: Create VFIOAddressSpace objects as needed
  vfio: Introduce VFIO address spaces
  vfio: Rework to have error paths
  vfio: Fix 128 bit handling
  int128: Add int128_exts64()
  memory: Sanity check that no listeners remain on a destroyed AddressSpace
  vfio-pci: Quirk RTL8168 NIC

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-06-03 14:37:43 +01:00
Peter Maydell
82ea61c6da qtest: improve ehci/uhci test
usb: misc fixes, mostly for usb3/xhci
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABAgAGBQJTjIziAAoJEEy22O7T6HE4HNMP/A9kbK49yK4o+/9tdemCsNnD
 KfDlt8K+NPnI1VzhOTOpbFN1ci5Oq1VQ0syw6uIwU5v8E0ZXKoS7uqIYKTx2rjfX
 w5tGSlK/gjYGLeN/VhbIOcELuBo2hdUDzYEpjdcUZ0L4xkKRVwoN30P292/KlRTu
 ZBOdaz4JlrGJRTUgb35GaVNhtSFAdIPNUHlzdyq+lJJuJq4quQh4mO3J/eQqRveJ
 EiLRKvc1FV4Z0tLZ3tzKemDYGJoA6conRCe+Xt+fmdlROm/037HjQ+/KqUyXKdFs
 hpYAj58bKrtIE9Dyo3MwD7/4R2XgkDYNGXeGlrGTgmkhwujme8vB/K57sqYlLnE1
 1iCf03gXd+Ap1zU7BTv+abFfuA/7SFnkIgs3+zU68UFfmiBKGDQgxLCnqGMWlari
 DpIf94T7ZLdNz6sc4FG4gQCP+aVJYTUjkjtunfJMfE/qz6Xb5BJQIPc3aHnAsqrb
 LG75rjJfS1rh1+SvNm7f46fC+7A9eKYOlbkbH8c3BQDCJkZyeWovnml4xIlLkvkg
 8xJB5UJVb4B4MKQW7Zi0hrDaN8/GVVyWymtt3Dl/I2iHBdV2Z/U+2/rFtLtZQ1zi
 oLl+ZteHaU3hnr5DNns3DuMSG33UT+o9gzaHsUldetwLiyGOiUC2i4P3xPD7fPID
 mJKO98266m9KMshEdw7k
 =4LqT
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/kraxel/tags/pull-usb-8' into staging

qtest: improve ehci/uhci test
usb: misc fixes, mostly for usb3/xhci

# gpg: Signature made Mon 02 Jun 2014 15:40:34 BST using RSA key ID D3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg:                 aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg:                 aka "Gerd Hoffmann (private) <kraxel@gmail.com>"

* remotes/kraxel/tags/pull-usb-8:
  xhci: order superspeed ports first
  xhci: make port reset trace point more verbose
  usb: add usb_pick_speed
  usb-host: add HAVE_STREAMS define
  usb-host: allow attaching usb3 devices to ehci
  usb: improve ehci/uhci test
  usb: move ehci register defines to header file
  usb: add uhci port status reserved bit
  usb: move uhci register defines to header file
  qtest: fix qpci_config_writel

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-06-02 17:07:21 +01:00
Gerd Hoffmann
7bafd8889e xhci: order superspeed ports first
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-06-02 16:38:09 +02:00
Gerd Hoffmann
b791c3b38c usb: add usb_pick_speed
We can pick the usb port speed in generic code, by looking at the port
and device speed masks and looking for the fastest match.  So add a
function to do exactly that, and drop the speed setting code from
usb_desc_attach as it isn't needed any more.

This way we can set the device speed before calling port->ops->attach,
which fixes some xhci hotplug issues.

https://bugzilla.redhat.com/show_bug.cgi?id=1046873

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-06-02 16:29:00 +02:00
Gerd Hoffmann
381626a969 usb: move ehci register defines to header file
So we can easily use them in tests.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-06-02 16:28:59 +02:00
Gerd Hoffmann
95dd1c4d7a usb: add uhci port status reserved bit
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-06-02 16:28:59 +02:00
Gerd Hoffmann
9a1d111e70 usb: move uhci register defines to header file
So we can easily use them in tests.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-06-02 16:28:59 +02:00
Gerd Hoffmann
bdef972474 console: add kbd_put_string_console
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-06-02 16:28:58 +02:00
Gerd Hoffmann
50ef467923 console: add kbd_put_qcode_console
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-06-02 16:28:58 +02:00
Alexey Kardashevskiy
12e1129b80 int128: Add int128_exts64()
This adds macro to extend signed 64bit value to signed 128bit value.

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2014-05-30 13:00:28 -06:00
Peter Maydell
d7d3d6092c QOM/QTest infrastructure fixes and device conversions
* qom-test extension
 * QEMUMachineInitArgs conversion to MachineState
 * -machine options turned into /machine properties
 * Named GPIO IRQs for devices
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABAgAGBQJThhu0AAoJEPou0S0+fgE/tokP/i3xzx9zYMPSVkymwKsozTsV
 j7+aW6/XhRom7V3pmGGSeG8OrRjH4rC9tiS3610+gks/tfE5RtqvNVotJ1Py7EVW
 BoBNOHG9Lsx8UZVarO+aiQnqDJgKpEzkTb5cD5hopQ4c0jTrXWa0JCRGG0nxLSU/
 vVnIkOs2FgzyJio5j9IX+ULyA6MYA0iZDBKCfuk0S7RiIRm0VopXftcREbiA8rXN
 1pJXVY7ciLdJLOk+m7o7BD/b9KcRVKFkWkS2BhcF4HbdTbKmannDCxuyYTJ+y9vn
 Lxo/sDzIZl4bknKmTM2lVQ50QpVWvNOoS6nwmvx2fVeiLIt+URoYmQh61O9xYO3H
 Lb+I68X4NYIz59nzgQPFMUjzbqI3xriO9A7/SSZt5GO0ylCwcELpzSFYZyYorVDQ
 KxVpJG+o4ZYuDw4oOySKitVtmPyR7/uXjlhJOYWs8w0pwX3ffj2lHCFFQDWwAIwG
 1lT+whTCSyonpAGbn6WM5Cn7cuKWyD9swHEgxTVAcR9wwT9WYkZYGiQQRuVzIfg7
 KJoJJcS7CDvci6vKlpzGuxi0bF8AxLMcvEfHfdQUu1vKEbOno2dDpsksWxPhvwSn
 n4E+LZYgtAjDvib+otrVM+dPZRSPVyWh/bvK+Cu4BHT/uTbW/SA+Hq1wzgxOUArF
 e1aoE6qUtGfh7elgK5W3
 =JVpT
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/afaerber/tags/qom-devices-for-peter' into staging

QOM/QTest infrastructure fixes and device conversions

* qom-test extension
* QEMUMachineInitArgs conversion to MachineState
* -machine options turned into /machine properties
* Named GPIO IRQs for devices

# gpg: Signature made Wed 28 May 2014 18:24:04 BST using RSA key ID 3E7E013F
# gpg: Can't check signature: public key not found

* remotes/afaerber/tags/qom-devices-for-peter:
  ssi: Name the CS GPIO
  qdev: Implement named GPIOs
  machine: Make -machine opts properties of MachineState
  tests: Check empty QMP output visitor
  qapi: Avoid output visitor crashing if it encounters a NULL value
  vl.c: Do not set 'type' property in obj_set_property()
  machine: Conversion of QEMUMachineInitArgs to MachineState
  qom-test: Test qom-list on link<> properties

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-05-28 18:38:39 +01:00
Richard Henderson
011209e19f tcg: Move size effects out of dh_arg
Tidying the initialization of the args arrays at the same time.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
2014-05-28 09:33:55 -07:00
Richard Henderson
bbb8a1b455 tcg: Remove sizemask and flags arguments to tcg_gen_callN
Take them from the TCGHelperInfo struct instead.

Signed-off-by: Richard Henderson <rth@twiddle.net>
2014-05-28 09:33:55 -07:00
Richard Henderson
afb49896fa tcg: Save flags and computed sizemask in TCGHelperInfo
Signed-off-by: Richard Henderson <rth@twiddle.net>
2014-05-28 09:33:54 -07:00
Richard Henderson
a5ed2de10a tcg: Move side effects out of dh_sizemask
Moving them into dh_arg instead.

Signed-off-by: Richard Henderson <rth@twiddle.net>
2014-05-28 09:33:54 -07:00
Richard Henderson
836d6ed96e tcg: Inline tcg_gen_helperN
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
2014-05-28 09:33:54 -07:00
Richard Henderson
944eea962b tcg: Push tcg-runtime routines into exec/helper-*
Rather than special casing them, use the standard mechanisms
for tcg helper generation.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
2014-05-28 09:33:54 -07:00
Richard Henderson
2ef6175aa7 tcg: Invert the inclusion of helper.h
Rather than include helper.h with N values of GEN_HELPER, include a
secondary file that sets up the macros to include helper.h.  This
minimizes the files that must be rebuilt when changing the macros
for file N.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
2014-05-28 09:33:54 -07:00
Peter Crosthwaite
de77914e50 ssi: Name the CS GPIO
To get it out of the default GPIO list. This allows child devices to
use the un-named GPIO namespace without having to be SSI aware. That
is, there is no more need for machines to know about the obscure
policy where GPIO 0 is the SSI chip-select and GPIO 1..N are the
concrete class GPIOs (defined locally as 0..N-1).

This is most notable in stellaris, which uses a device which has both
SSI and concrete level GPIOs.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
2014-05-28 17:36:21 +02:00
Peter Crosthwaite
a5f54290ce qdev: Implement named GPIOs
Implement named GPIOs on the Device layer. Listifies the existing GPIOs
stuff using string keys. Legacy un-named GPIOs are preserved by using
a NULL name string - they are just a single matchable element in the
name list.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
2014-05-28 17:36:21 +02:00
Marcel Apfelbaum
6b1b144019 machine: Make -machine opts properties of MachineState
Make machine's QemuOpts QOM properties of /machine. The properties
are automatically filled in. This opens the possibility to create
opts per machine rather than global.

Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
2014-05-28 17:36:13 +02:00
Marcel Apfelbaum
3ef9622182 machine: Conversion of QEMUMachineInitArgs to MachineState
Total removal of QEMUMachineInitArgs struct. QEMUMachineInitArgs's fields
are copied into MachineState. Removed duplicated fields from MachineState.

All the other changes are only mechanical refactoring, no semantic changes.

Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> (s390)
Reviewed-by: Michael S. Tsirkin <mst@redhat.com> (PC)
[AF: Renamed ms -> machine, use MACHINE_GET_CLASS()]
Signed-off-by: Andreas Färber <afaerber@suse.de>
2014-05-28 17:35:01 +02:00
Peter Maydell
3ee933c9d4 Block pull request
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJThdcTAAoJEJykq7OBq3PIH4UH/iKRrso84PjPirsYfQsga+2i
 Nx3FG2AnmCU5jYn0XjXBlq+K56BpAxuimhscPdtCpP2FeBEeFb53XfxyfUH8ybVs
 dACgd4MulFC9UUX06CnaSh011nG7tGELHrnAVOSqMKVSOc+GDv9yQhtN8r8bfqKx
 kt0ZWsZZ6iawbXgnd0L1mS22XANrGy1DlSWzUPL6WgS7ksJ0gg6EalEWfU4YXv+u
 k2xjVfEcHhmvlS+eS1xnI0RrJ9LAWmi0nS5BV7yRiy8+U+V30iADDKObWNIom+jm
 SYH4oT+asIYucl9CpXCa+5AA0tTt52oeBM28TYgJwQx8hEVLN6Td+N4q7RewKsM=
 =kKnv
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/stefanha/tags/block-pull-request' into staging

Block pull request

# gpg: Signature made Wed 28 May 2014 13:31:15 BST using RSA key ID 81AB73C8
# gpg: Can't check signature: public key not found

* remotes/stefanha/tags/block-pull-request: (33 commits)
  block/sheepdog: Don't use qerror_report()
  block/sheepdog: Fix silent sd_open(), sd_create() failures
  block/sheepdog: Propagate errors to open and create methods
  block/sheepdog: Propagate errors through find_vdi_name()
  block/sheepdog: Propagate errors through do_sd_create()
  block/sheepdog: Propagate errors through sd_prealloc()
  block/sheepdog: Propagate errors through get_sheep_fd()
  block/sheepdog: Propagate errors through connect_to_sdog()
  block/vvfat: Propagate errors through init_directories()
  block/vvfat: Propagate errors through enable_write_target()
  block/ssh: Propagate errors to open and create methods
  block/ssh: Propagate errors through connect_to_ssh()
  block/ssh: Propagate errors through authenticate()
  block/ssh: Propagate errors through check_host_key()
  block/ssh: Drop superfluous libssh2_session_last_errno() calls
  block/rbd: Propagate errors to open and create methods
  qemu-nbd: Don't use qerror_report()
  blockdev: Don't use qerror_report() in do_drive_del()
  blockdev: Don't use qerror_report_err() in drive_init()
  docs: Define refcount_bits value
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-05-28 15:22:40 +01:00
Fam Zheng
826b6ca0b0 block: Add backing_blocker in BlockDriverState
This makes use of op_blocker and blocks all the operations except for
commit target, on each BlockDriverState->backing_hd.

The asserts for op_blocker in bdrv_swap are removed because with this
change, the target of block commit has at least the backing blocker of
its child, so the assertion is not true. Callers should do their check.

Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-05-28 14:28:46 +02:00
Fam Zheng
8d24cce1e3 block: Add bdrv_set_backing_hd()
This is the common but non-trivial steps to assign or change the
backing_hd of BDS.

Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-05-28 14:28:46 +02:00
Fam Zheng
3718d8ab65 block: Replace in_use with operation blocker
This drops BlockDriverState.in_use with op_blockers:

  - Call bdrv_op_block_all in place of bdrv_set_in_use(bs, 1).

  - Call bdrv_op_unblock_all in place of bdrv_set_in_use(bs, 0).

  - Check bdrv_op_is_blocked() in place of bdrv_in_use(bs).

    The specific types are used, e.g. in place of starting block backup,
    bdrv_op_is_blocked(bs, BLOCK_OP_TYPE_BACKUP, ...).

    There is one exception in block_job_create, where
    bdrv_op_blocker_is_empty() is used, because we don't know the operation
    type here. This doesn't matter because in a few commits away we will drop
    the check and move it to callers that _do_ know the type.

  - Check bdrv_op_blocker_is_empty() in place of assert(!bs->in_use).

Note: there is only bdrv_op_block_all and bdrv_op_unblock_all callers at
this moment. So although the checks are specific to op types, this
changes can still be seen as identical logic with previously with
in_use. The difference is error message are improved because of blocker
error info.

Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-05-28 14:28:46 +02:00
Fam Zheng
fbe40ff780 block: Introduce op_blockers to BlockDriverState
BlockDriverState.op_blockers is an array of lists with BLOCK_OP_TYPE_MAX
elements. Each list is a list of blockers of an operation type
(BlockOpType), that marks this BDS as currently blocked for a certain
type of operation with reason errors stored in the list. The rule of
usage is:

 * BDS user who wants to take an operation should check if there's any
   blocker of the type with bdrv_op_is_blocked().

 * BDS user who wants to block certain types of operation, should call
   bdrv_op_block (or bdrv_op_block_all to block all types of operations,
   which is similar to the existing bdrv_set_in_use()).

 * A blocker is only referenced by op_blockers, so the lifecycle is
   managed by caller, and shouldn't be lost until unblock, so typically
   a caller does these:

   - Allocate a blocker with error_setg or similar, call bdrv_op_block()
     to block some operations.
   - Hold the blocker, do his job.
   - Unblock operations that it blocked, with the same reason pointer
     passed to bdrv_op_unblock().
   - Release the blocker with error_free().

Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-05-28 14:28:46 +02:00
Fam Zheng
8574575f90 block: Add BlockOpType enum
This adds the enum of all the operations that can be taken on a block
device.

Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-05-28 14:28:46 +02:00
Peter Maydell
53651ec26b console: multiwindow support for text terminal QemuConsoles
console: small fixes
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABAgAGBQJTgviXAAoJEEy22O7T6HE4MT8P/2KmAyqcBgq5Z1UXFdjrR9NC
 LAcYNDDPan0ZRfVXwg2r6XV2lCrQgZN9g9mprE5KZGrGHTvoOgzdECBB5FR0R6mg
 1XcYyxyNAsN/9ddUxFPnN3Mku5lczHG5PtDaP4eSPl4PaMEe7Cz66H36QNRZOC7v
 D8bNGYoXlncTcmU8I1vSqUnVglpbHCN4JLMhpAF9Ak+7GC9Yxq3nWJ9D38Cy8V7N
 Y0DdUxPK/Hx48HSjgs2hrmrXtMnUmhz154sL4IVpiVuQG19Fs69Zd0fTcw4Gcu+W
 V2GdNiH206H8VC/DA7toN/CNj6MIQqxiM4vu846rdUdin42romATg2E7UF8vu2c0
 sw+86DDGB+J0G4J6iQoWyt5dcOB/XoplEqXh0zsudbmPLcUrwSHuMlWoMwf+8pvu
 Cjl9tl/6yXWS/ChVErcMHxyGG9FXsB3ouU7mmKTX2efimssHcRwvTyp8y0Knt6/e
 ZweMXozdJASrwSy0HDHCJvVOqva6UjTPClzjKISq/rHa5E5D1CybKOxz3BWydC51
 ppGHu1kzTVD7d/hSz4+M4SHLg/jkSSK9s7fM8lwNvIAN6PpVOdf7bsxrnNZOrYiH
 2ZsbiOaZISiDcP94PntP/1yyJRDQCp7wOQ+orAv0WLLYwuDdqnzCDrFn1IkVq9PT
 +ykImMosc8dgdc5+pBAU
 =NwUd
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/kraxel/tags/pull-console-1' into staging

console: multiwindow support for text terminal QemuConsoles
console: small fixes

# gpg: Signature made Mon 26 May 2014 09:17:27 BST using RSA key ID D3E87138
# gpg: Can't check signature: public key not found

* remotes/kraxel/tags/pull-console-1:
  console: add kbd_put_keysym_console
  console: rework text terminal cursor logic
  console: update text terminal surface unconditionally
  console: nicer initial screen
  console: Abort on property access errors

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-05-28 12:36:25 +01:00
Peter Maydell
4aa23452e3 input: add event routing and multiseat support.
input: misc bugfixes and minor improvements.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABAgAGBQJTguLNAAoJEEy22O7T6HE4d3MP/2+JYwz9ZiCuzBTriUDvMGpg
 ujCT5bk2Dcd3wHlrFfRX2saRxskcWstWrOuy6IwygSSpPRlqF67gLUqgByjAwFwJ
 g/JA4BGKrsFsI20XWkzB55e4FmbA+eixBEnDnuUHwvJebS1aCHNrb352E9nWFMne
 opsbpkCFkZULMXsqnELgsldqTaW0huSgdOFa0WsCPWi9rMdJL2SJjDvLgUlP4YVB
 v22AYSpZBd4TB+pSRxiUb2f4fVuAyaV5rCubJDKGLaKUuPZf3+2x664XuqYZ8RvI
 sOi6r2viamy7NuD9C6YOz2hwqeFj6A15viBo8KZmotAHB6/hi/3I0rLAQsRgxsGh
 zxNRHtOkF6n237KMWk7wh7SqGXtCr7mCe750bFru1W3FqlGlODAPYgIFODz1L50G
 51nlrXroFMkpM0FsLARtaeMoKo4k8e1o+08R9wVwkyNz+sPwlW7yoQKOlyWfmeKe
 GTTvRJWmggF3pqf6LEIQrgOQyBuArrX4SR1AeRzhYmw/H5h+Df7oeHAlv2Yx6Sus
 mAit/ExI9HeTE2BwyXCzu99LFAmogRvvB+45dbwC9INf537p9hdyKCyrFU1uQofw
 lw3cCfyNZu0BQR0YUpR2NCaFfWWkPQehi19kpKOpyiKscYy7RNJr10vaz9FuFppv
 x9nOKTuiaAMGIyJwWfmU
 =oPCg
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/kraxel/tags/pull-input-9' into staging

input: add event routing and multiseat support.
input: misc bugfixes and minor improvements.

# gpg: Signature made Mon 26 May 2014 07:44:29 BST using RSA key ID D3E87138
# gpg: Can't check signature: public key not found

* remotes/kraxel/tags/pull-input-9:
  docs: add multiseat.txt
  usb: add input routing support for tablet and keyboard
  sdl: pass key event source to input layer
  input: bind devices and input routing
  input: switch hid mouse and tablet to the new input layer api.
  input: switch hid keyboard to new input layer api.
  input: keymap: add meta keys
  input: add name to input_event_key_number
  input: add qemu_input_key_number_to_qcode
  input (curses): mask keycodes to remove modifier bits

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-05-28 10:33:05 +01:00
Peter Maydell
9474ab1487 trivial patches for 2014-05-26
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQEcBAABAgAGBQJTgup0AAoJEL7lnXSkw9fb2z0IAJVnjV1b2xGqWrbBFPvm1zdT
 8vSKdW77kvtL1Usx2xLLqjn+xfJsmDwiIfEZvAEsma2s8ubVkz9hiQylq9jdSxGi
 YR0i8xUeqeF6n2RttzEw9rENHa9qZllxGpBQyIcjxo+7hcgVkj0r15x+JAIkeIpV
 6iCx1mqAC5QJbHrIN1eO5ymDZvsq37Q8S9jRU0hJ18MwFfKc1z9T38D+VytnW9xK
 l5Qg3JEf9HBI9zTChfRDImTDXNV2Ehm0nK5/8noD0mjp06p/DF/HN+BDsXM/0cPc
 aWmoVNa0KGCqXvmI+F/7RWBzxaOkH9UXDrf1ed10Io6Nsp0nGfxWJHEA9to/fyo=
 =86oR
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/mjt/tags/trivial-patches-2014-05-26' into staging

trivial patches for 2014-05-26

# gpg: Signature made Mon 26 May 2014 08:17:08 BST using RSA key ID A4C3D7DB
# gpg: Can't check signature: public key not found

* remotes/mjt/tags/trivial-patches-2014-05-26: (23 commits)
  libcacard: remove useless initializers
  net: cadence_gem: Fix top comment
  bsd-user: replace fprintf(stderr, ...) with error_report()
  audio: replace fprintf(stderr, ...) with error_report() in audio
  libcacard: fix wrong array expansion logic
  libcacard/vcard_emul_nss: Drop a redundant conditional
  libcacard: Convert two leftover realloc() to GLib
  libcacard/vreader: Tighten assertion to clarify intent
  libcacard/vreader: Drop broken recovery from failed assertion
  libcacard: Plug memory leaks around vreader_get_reader_list()
  libcacard/vscclient: Bury some dead code
  vl: fix 'name' option to work with -readconfig
  configure: Put tempfiles in a subdir of the build directory
  dma-helpers: avoid calling dma_bdrv_unmap() twice
  arch_init: replace fprintf(stderr, ...) with error_report()
  pci: move dereferencing of root only after verifying valid root pointer
  jazz_led: Add missing break in switch case
  bswap.h: Rename ldl_p, stl_p, etc to ldl_he_p, stl_he_p, etc
  configure: Automatically select GTK+ 3.0 if GTK+ 2.0 is unavailable
  nbd: Miscellaneous typo fixes.
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-05-27 22:45:03 +01:00
Gerd Hoffmann
6f5943cf45 input: bind devices and input routing
Add function to bind input devices to display devices.  Implementing
input routing on top of this:  Events coming from the display device in
question are routed to the input device bound to it (if there is one).

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-05-26 08:42:43 +02:00
Gerd Hoffmann
8b84286f4c input: switch hid mouse and tablet to the new input layer api.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-05-26 08:42:43 +02:00
Gerd Hoffmann
1ff5eedd1d input: switch hid keyboard to new input layer api.
Minimal patch to get the switchover done.  We continue processing ps/2
scancodes for now as they are part of the live migration stream.  Fixing
that, then mapping directly from QKeyValue to HID keycodes is left as
excercise for another day.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-05-26 08:42:43 +02:00
Gerd Hoffmann
11c7fa7fa6 input: add qemu_input_key_number_to_qcode
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-05-26 08:42:42 +02:00
Gerd Hoffmann
3f9a6e852e console: add kbd_put_keysym_console
So you can send keysyms to a specific (text terminal) console.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-05-26 08:41:02 +02:00
Richard Henderson
b6bfeea92a tcg-mips: Enable direct chaining of TBs
Now that the code_gen_buffer is constrained to not cross 256mb
regions, we are assured that we can use J to reach another TB.

Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>
2014-05-24 08:48:37 -07:00
Peter Maydell
1a3de8dbec bswap.h: Rename ldl_p, stl_p, etc to ldl_he_p, stl_he_p, etc
We have an unfortunate naming clash between the functions
ldl_p, stl_p, etc defined in bswap.h (which have semantics
"load/store in host endianness") and the #defines of the same
name in cpu-all.h (which have the semantics "load/store in
target endianness").

Fortunately it turns out that the only users of the bswap.h
functions are all within bswap.h itself, so we can simply
rename them to include a _he_ infix for "host endianness".

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2014-05-24 00:07:29 +04:00
Peter Maydell
6054d883d6 purge error_is_set()
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABAgAGBQJTfINgAAoJEEy22O7T6HE4OYEP/ivFyUP2zh40BjOGS5ZaBBc4
 hkBueBWD+MHSD7nl5dZzC1syxrbCjgaImME+EcC5t80Zqovn9mKS4b/B0T5GPOQT
 sfyLQ+YKcA+iXnaCgn3L/3N1eW6ynOBJtLyu54Ql69VZF7A01d+sjFnCIet1g7ov
 VNw6KEs6IQ3au/SVtBKJV0y+qICbHE8vbyPK+/vPReJfDcEtu7xyYd0a+gMXHmzF
 zR2qKdJgB1QO+PV5tg3b3lQQgrEHtHPmQgv1oXvYxE2swRy2yHRfgcjiq/RHIymk
 42M3FOPWulwOo2/nSiV7yWjfvoOLy/OkwoG0Qtr3UpT8SKSw8gzAIDJUyhR8k24v
 ne9uHM8ji290xa+wG91/iAuCWNgOYdYhgIi6HOJu9O0jUPbXR7eJp8SSBZUvk9LJ
 MykKRPBSKmny7m2Qt/3oW6mDmrf5kULioFdgVippRdl+8Qynxo/F/Ae3576kHI+5
 HYEaF3w1vDcdxypRnn5Yp0stYIhvqV6GF3UvEiPL7TeJbwuYyXsHkBT3+AkIGvgv
 dKQLPF8DP++pAvdgirKsoaXSmFLhHzLp8QI+bdvAYV1ctrXfrcuio9WSzMjcco6y
 etxZjeDmWyCOIsuHXvwRsvVOfh/OpBSe2yYh4n2Z2JxZPhs/HvoDQbANyY/0eNfm
 gYbUSZ/M5nXjdazxnncl
 =Jla5
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/kraxel/tags/pull-chardev-2' into staging

purge error_is_set()

# gpg: Signature made Wed 21 May 2014 11:43:44 BST using RSA key ID D3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg:                 aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg:                 aka "Gerd Hoffmann (private) <kraxel@gmail.com>"

* remotes/kraxel/tags/pull-chardev-2:
  error: error_is_set() is finally unused; remove
  char: Explain qmp_chardev_add()'s unusual error handling
  char: Clean up fragile use of error_is_set()
  char: Use return values instead of error_is_set(errp)
  qemu-socket: Clean up inet_connect_opts()

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-05-22 18:14:01 +01:00
Peter Maydell
45e66b7beb some s390 patches:
- Enable irqfds on s390 via the new adapter interrupt routing type.
   As a prereq, fix the kvm enable_cap helpers for some compilers and
   split the s390 flic into kvm and non-kvm parts.
 - Enable software and hardware debugging support on s390. This needs a
   kernel headers update.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJTezzuAAoJEN7Pa5PG8C+vujQQAIYfi5sdGIomu6sneNW/BFDY
 9mik3q6gqLIOWbyVpPP2UyY6LdIhIFlurjHgaM86MQjNLpP1SU8hqoHBYf1dKi8K
 59krakj3RlI6S3kbJc/kljUJZ3PM/GChPWS2SA8G7qY0zyK91flhHBlB/hvE/ar6
 XwcL5YOJV3XTglVgS3UKVwuOpZwnP8LzUKOytZ141O/u1Eigc/yag/sWZmY90XxY
 FUVGbf7pWoOQiiYCEUfAVC3oaCa0wlXLy8jPF3/jeSTr40rjCOeBcV+f+QpLHHSj
 2KLktaGWl6COqAzvH2mNNy4SdLLCvFi9TfCjKNTMRnIwoEaZT2MjVDe+47aqTMNs
 p54dbRLOBdFsJ5Z32TWBlFPMKlgsqlVubhhmMVa+zfOGI5JiSX62rimpSESJ3G/H
 5NN3WoO6qTrC6JBfu1AZ/dhxehwnPjrQ2dFHtevH1BOj6avn0vi3l2mbHJtdRxnD
 Txsbi5v5S1K7HKhsqScQabFlAn0ZwhF/rs+6Ssr1lMegYpJMWR2V1AtTFSi1cuGw
 NY5tRNB+slufIn5GOBnJemyriigg0B/G0QggyqBuehRZ7WjKnKVdfBZhiOePl8ff
 2+2ixsGIBNIgsLKvw7zVaWWZH5OHH7+ZXuFmV1O3fqMqwHPysCQE/kAYrbyMzxlF
 Sb0gKUcqMrYMa1EjDmpf
 =hrU2
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/cohuck/tags/s390x-20140520' into staging

some s390 patches:

- Enable irqfds on s390 via the new adapter interrupt routing type.
  As a prereq, fix the kvm enable_cap helpers for some compilers and
  split the s390 flic into kvm and non-kvm parts.
- Enable software and hardware debugging support on s390. This needs a
  kernel headers update.

# gpg: Signature made Tue 20 May 2014 12:30:54 BST using RSA key ID C6F02FAF
# gpg: Can't check signature: public key not found

* remotes/cohuck/tags/s390x-20140520:
  s390x/kvm: hw debugging support via guest PER facility
  s390x/kvm: software breakpoint support
  s390x: remove duplicate definitions of DIAG 501
  linux-headers: update
  s390x/virtio-ccw: wire up irq routing and irqfds
  s390x/virtio-ccw: reference-counted indicators
  s390x: add I/O adapter registration
  s390x: split flic into kvm and non-kvm parts
  kvm: Fix enable_cap helpers on older gcc

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-05-22 16:14:02 +01:00
Andreas Färber
7c8b724826 pcie_host: Turn pcie_host_init() into an instance_init
This assures the trivial field initialization is applied for any derived
type - currently only Q35PCIHost.

Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-05-21 15:47:50 +03:00
Gabriel L. Somlo
0d73394ad9 SMBIOS: Fix type 17 field sizes
Fields for configured_clock_speed and various voltage values
introduced in spec v2.7+ should be "word", i.e. 16 bits.

Reported-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Gabriel Somlo <somlo@cmu.edu>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-05-21 15:47:50 +03:00
Gabriel L. Somlo
84351843eb SMBIOS: Update Type 0 struct generator for machines >= 2.1
Update how type 0 (bios info) structures are generated, as follows:

  - convert bios_characteristics field to uin64_t (instead of
    uint8_t[8]), as described in the current smbios spec (v2.8)

  - enable "virtual machine" bit in bios_characteristics_extension_bits

  - add command line option to enable "uefi supported" bit in
    bios_characteristics_extension_bits

These updates should make this optional structure more useful when
used with edk2/ovmf. Only pc machines >= 2.1 are affected, and only
when a type 0 structure is explicitly specified on the command line.

Signed-off-by: Gabriel Somlo <somlo@cmu.edu>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-05-21 15:47:50 +03:00
BALATON Zoltan
13cc2c3e86 serial-pci: Set prog interface field of pci config to 16550 compatible
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
2014-05-21 15:47:50 +03:00
Markus Armbruster
d2e064a73e error: error_is_set() is finally unused; remove
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-05-21 11:57:58 +02:00
Cornelia Huck
d426d9fba8 s390x/virtio-ccw: wire up irq routing and irqfds
Make use of the new s390 adapter irq routing support to enable real
in-kernel irqfds for virtio-ccw with adapter interrupts.

Note that s390 doesn't provide the common KVM_CAP_IRQCHIP capability, but
rather needs KVM_CAP_S390_IRQCHIP to be enabled. This is to ensure backward
compatibility.

Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2014-05-20 13:05:58 +02:00
Cornelia Huck
03cf077ac9 s390x: add I/O adapter registration
Register an I/O adapter interrupt source for when virtio-ccw devices start
using adapter interrupts.

Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2014-05-20 13:05:58 +02:00
Cornelia Huck
7b35d0c44c s390x: split flic into kvm and non-kvm parts
Introduce a common parent class for both cases, where kvm and non-kvm
can hook up callbacks. This will be used by follow-on patches for
adapter registration and mapping.

We now always have a flic, regardless of whether we use kvm; the
non-kvm implementation just doesn't do anything.

Reviewed-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2014-05-20 13:05:57 +02:00
Alexander Graf
61c7bbd236 kvm: Fix enable_cap helpers on older gcc
Commit 40f1ee27aa introduced handy helpers for enable_cap calls on
vcpu and vm level. Unfortunately some older gcc versions (4.7.1, 4.6)
seem to choke on signedness detection in inline created variables:

target-ppc/kvm.c: In function 'kvmppc_booke_watchdog_enable':
target-ppc/kvm.c:1302:21: error: comparison of unsigned expression < 0 is always false [-Werror=type-limits]
target-ppc/kvm.c: In function 'kvmppc_set_papr':
target-ppc/kvm.c:1504:21: error: comparison of unsigned expression < 0 is always false [-Werror=type-limits]

However - thanks to Thomas Huth for the suggestion - we can just cast the
offending potentially 0 value to a signed type, making the comparison signed.

Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2014-05-20 13:05:57 +02:00
Peter Maydell
ca8c0fab95 Block patches
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABAgAGBQJTehNaAAoJEH8JsnLIjy/Ws+QP/0C7GTkY+CAgSSoQmIKr96lf
 k0iRIypxMw68S6NEXtiqFn1yLVv41+puamrznmOSBqxZwwWLpu+J28M8i3M3lr2Q
 /bs7l22+HfakfJ6AJkYXaLPqAlRdCnM3HOLWpDuVFLeaLlHV14w4oWCIAs/lA6Tg
 n4S4nKpWUzm97NnNvQjf953kSFZ/xfH72PcICE5vyaQBnrDMMUnRyffdnVBEGMjd
 hhx/demJNXt+01XxC4VrnvpibGvMthEbQoRwemFi2snD6YXhk9XcT+jiD2VMrgCr
 fC316vdAFAiVNvI+JjCRE/1gaMRI+m0tNpymzGWnbnEc8P86KUaitASRc150NDSO
 UgpDg7oneMXC66OdZXG0XqojiAQ8sqHrvMpV+YiirJUbwIcD5ITDKt9omuIjOWjj
 ENXHOk2U87xoFfqBRRbsuO+U2QtfPDFA4jRjh5ppUy/0xuW/YL3SBCSdUHR8jalM
 H8mYcC9zKsL7D71Nh6spU4btNK2xjZT+vPoiurHNyiBSVniHagsKPGtzQCqhJEa+
 y9xCBCyqZvHBvQ2w1pE4DBOIvt3L0kKd7pRxRch9letCA6Fo/ktb7rvkDkcPVh50
 I0kphrnWqGLgC+8oMvh/gjwtzvWkTCfc8jhvzAcBGaInQr+spSaduCAnrGTpfBh1
 vfvc1o3NUVhvqipMgdzq
 =LnQj
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging

Block patches

# gpg: Signature made Mon 19 May 2014 15:21:14 BST using RSA key ID C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>"

* remotes/kevin/tags/for-upstream: (22 commits)
  block: optimize zero writes with bdrv_write_zeroes
  blockdev: add a function to parse enum ids from strings
  util: add qemu_iovec_is_zero
  qcow1: Stricter backing file length check
  qcow1: Validate image size (CVE-2014-0223)
  qcow1: Validate L2 table size (CVE-2014-0222)
  qcow1: Check maximum cluster size
  qcow1: Make padding in the header explicit
  curl: Add usage documentation
  curl: Add sslverify option
  curl: Remove broken parsing of options from url
  curl: Fix build when curl_multi_socket_action isn't available
  qemu-iotests: Fix blkdebug in VM drive in 030
  qemu-iotests: Fix core dump suppression in test 039
  iotests: Add test for the JSON protocol
  block: Allow JSON filenames
  check-qdict: Add test for qdict_join()
  qdict: Add qdict_join()
  block: add test for vhdx image created by Disk2VHD
  block: vhdx - account for identical header sections
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-05-20 11:57:52 +01:00
Peter Maydell
c5fa6c86d0 Merge remote-tracking branch 'remotes/qmp-unstable/queue/qmp' into staging
* remotes/qmp-unstable/queue/qmp:
  qapi: skip redundant includes
  monitor: Add netdev_del id argument completion.
  monitor: Add netdev_add type argument completion.
  monitor: Add set_link arguments completion.
  monitor: Add chardev-add backend argument completion.
  monitor: Add chardev-remove command completion.
  monitor: Convert sendkey to use command_completion.
  qapi: Show qapi-commands.py invocation in qapi-code-gen.txt
  qapi: Replace uncommon use of the error API by the common one
  tests: Don't call visit_end_struct() after visit_start_struct() fails
  hw: Don't call visit_end_struct() after visit_start_struct() fails
  hmp: Call visit_end_struct() after visit_start_struct() succeeds
  qapi: Un-inline visit of implicit struct
  qapi-visit.py: Clean up a sloppy use of field prefix
  qapi: Clean up shadowing of parameters and locals in inner scopes
  qapi-visit.py: Clean up confusing push_indent() / pop_indent() use
  qapi: Replace start_optional()/end_optional() by optional()
  qapi: Remove unused Visitor callbacks start_handle(), end_handle()
  qapi: Normalize marshalling's visitor initialization and cleanup
  qapi: Update qapi-code-gen.txt example to match current code

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-05-19 14:10:01 +01:00
Peter Lieven
465bee1da8 block: optimize zero writes with bdrv_write_zeroes
this patch tries to optimize zero write requests
by automatically using bdrv_write_zeroes if it is
supported by the format.

This significantly speeds up file system initialization and
should speed zero write test used to test backend storage
performance.

I ran the following 2 tests on my internal SSD with a
50G QCOW2 container and on an attached iSCSI storage.

a) mkfs.ext4 -E lazy_itable_init=0,lazy_journal_init=0 /dev/vdX

QCOW2         [off]     [on]     [unmap]
-----
runtime:       14secs    1.1secs  1.1secs
filesize:      937M      18M      18M

iSCSI         [off]     [on]     [unmap]
----
runtime:       9.3s      0.9s     0.9s

b) dd if=/dev/zero of=/dev/vdX bs=1M oflag=direct

QCOW2         [off]     [on]     [unmap]
-----
runtime:       246secs   18secs   18secs
filesize:      51G       192K     192K
throughput:    203M/s    2.3G/s   2.3G/s

iSCSI*        [off]     [on]     [unmap]
----
runtime:       8mins     45secs   33secs
throughput:    106M/s    1.2G/s   1.6G/s
allocated:     100%      100%     0%

* The storage was connected via an 1Gbit interface.
  It seems to internally handle writing zeroes
  via WRITESAME16 very fast.

Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-05-19 13:42:27 +02:00
Peter Lieven
43f35cb5e0 util: add qemu_iovec_is_zero
Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-05-19 12:20:19 +02:00