Many of these should be cleaned up with proper qdev-/QOM-ification.
Right now there are many catch-all headers in include/hw/ARCH depending
on cpu.h, and this makes it necessary to compile these files per-target.
However, fixing this does not belong in these patches.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Both fields are used in VMState, thus need to be moved together.
Explicitly zero them on reset since they were located before
breakpoints.
Pass PowerPCCPU to kvmppc_handle_halt().
Signed-off-by: Andreas Färber <afaerber@suse.de>
Expose vmstate_cpu as vmstate_x86_cpu and hook it up to CPUClass::vmsd.
Adapt opaques and VMState fields to X86CPU. Drop cpu_{save,load}().
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Implicit use of dr7 bit field is a little hard to understand,
so define constants for them and use them consistently.
Signed-off-by: liguang <lig.fnst@cn.fujitsu.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
CPUID.7.0.EBX[1]=1 indicates IA32_TSC_ADJUST MSR 0x3b is supported
Basic design is to emulate the MSR by allowing reads and writes to the
hypervisor vcpu specific locations to store the value of the emulated MSRs.
In this way the IA32_TSC_ADJUST value will be included in all reads to
the TSC MSR whether through rdmsr or rdtsc.
As this is a new MSR that the guest may access and modify its value needs
to be migrated along with the other MRSs. The changes here are specifically
for recognizing when IA32_TSC_ADJUST is enabled in CPUID and code added
for migrating its value.
Signed-off-by: Will Auld <will.auld@intel.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Support get/set of new PV EOI MSR, for migration.
Add an optional section for MSR value - send it
out in case MSR was changed from the default value (0).
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Scripted conversion:
sed -i "s/CPUState/CPUX86State/g" target-i386/*.[hc]
sed -i "s/#define CPUX86State/#define CPUState/" target-i386/cpu.h
Signed-off-by: Andreas Färber <afaerber@suse.de>
Acked-by: Anthony Liguori <aliguori@us.ibm.com>
It's needed for its default value - bit 0 specifies that "rep movs" is
good enough for memcpy, and Linux may use a slower memcpu if it is not set,
depending on cpu family/model.
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
KVM add emulation of lapic tsc deadline timer for guest.
This patch is co-operation work at qemu side.
Use subsections to save/restore the field (mtosatti).
Signed-off-by: Liu, Jinsong <jinsong.liu@intel.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
KVM add emulation of lapic tsc deadline timer for guest.
This patch is co-operation work at qemu side.
Signed-off-by: Liu, Jinsong <jinsong.liu@intel.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
These FPU states are properly maintained by KVM but not yet by TCG. So
far we unconditionally set them to 0 in the guest which may cause
state corruptions, though not with modern guests.
To avoid breaking backward migration, use a conditional subsection that
is only written if any of the three fields is non-zero. The guest's
FNINIT clears them frequently, and cleared IA32_MISC_ENABLE MSR[2]
reduces the probability of non-zero values further so that this
subsection is not expected to restrict migration in any common scenario.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Now that target-i386 uses softfloat, floatx80 is always available and
there is no need anymore to have code handling both float64 and floax80.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
This reverts commit c995b495b9.
From Jan Kiszka:
Ouch, indeed. Moreover, CPU_SAVE_VERSION was not updated (likely the
reason for the breakage). Thanks for debugging this!
Anthony (or whoever), please revert this unneeded commit in qemu.git.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This grand cleanup drops all reset and vmsave/load related
synchronization points in favor of four(!) generic hooks:
- cpu_synchronize_all_states in qemu_savevm_state_complete
(initial sync from kernel before vmsave)
- cpu_synchronize_all_post_init in qemu_loadvm_state
(writeback after vmload)
- cpu_synchronize_all_post_init in main after machine init
- cpu_synchronize_all_post_reset in qemu_system_reset
(writeback after system reset)
These writeback points + the existing one of VCPU exec after
cpu_synchronize_state map on three levels of writeback:
- KVM_PUT_RUNTIME_STATE (during runtime, other VCPUs continue to run)
- KVM_PUT_RESET_STATE (on synchronous system reset, all VCPUs stopped)
- KVM_PUT_FULL_STATE (on init or vmload, all VCPUs stopped as well)
This level is passed to the arch-specific VCPU state writing function
that will decide which concrete substates need to be written. That way,
no writer of load, save or reset functions that interact with in-kernel
KVM states will ever have to worry about synchronization again. That
also means that a lot of reasons for races, segfaults and deadlocks are
eliminated.
cpu_synchronize_state remains untouched, just as Anthony suggested. We
continue to need it before reading or writing of VCPU states that are
also tracked by in-kernel KVM subsystems.
Consequently, this patch removes many cpu_synchronize_state calls that
are now redundant, just like remaining explicit register syncs.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
This reverts commit ebbc8a3d8e.
As suggested by Jan Kiszka,
"It was obsoleted by d1793b836f8f123b961c613de1bb1c0c185c84cc and now
saves/restores a useless field."
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Marcelo correctly remarked that there are usage conflicts between QEMU
core code and KVM /wrt exception_index. So spend a separate field and
also save/restore it properly.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Currently, the msrs involved in setting up pvclock are not saved over
migration and/or save/restore. This patch puts their value in special
fields in our CPUState, and deal with them using vmstate.
kvm also has to account for it, by including them in the msr list
for the ioctls.
This is a backport from qemu-kvm.git
[v2: sucessfully build without kerneldir ]
Signed-off-by: Glauber Costa <glommer@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
As KVM now makes use of exception_index to keep pending exceptions, we
have to save&restore this field as well.
NOTE: We have to nail the arch-independent exception_index down to a
certain bit width for proper vmstate processing, namely to 32 bit.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This patch extends the qemu-kvm state sync logic with support for
KVM_GET/SET_VCPU_EVENTS, giving access to yet missing exception,
interrupt and NMI states.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Drop interrupt_bitmap from the cpustate and solely rely on the integer
interupt_injected. This prepares us for the new injected-interrupt
interface, which will deprecate the bitmap, while preserving
compatibility.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This allows to define VMSTATE_SINGLE with VMSTATE_SINGLE_TEST
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
There was a missmerge, and then we got a tail recursive call to cpu_post_load
without case base :)
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
mce_banks is always MCE_BANKS_DEF * 4 in size, value never change
CC: Huang Ying <ying.huang@intel.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Don't even ask, being able to load/save between 64<->80bit floats should be forbidden
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
We save more that fpus on that 16 bits (fpstt), we need an additional field
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This makes the savevm code correct, and sign extensins gives us exactly
what we need (namely, sign extend to 64 bits when used with 64bit addresess.
Once there, change 0x100000 for 1 << 20, that maks all a20 use the same syntax.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
RDTSCP reads the time stamp counter and atomically also the content
of a 32-bit MSR, which can be freely set by the OS. This allows CPU
local data to be queried by userspace.
Linux uses this to allow a fast implementation of the getcpu()
syscall, which uses the vsyscall page to avoid a context switch.
AMD CPUs since K8RevF and Intel CPUs since Nehalem support this
instruction.
RDTSCP is guarded by the RDTSCP CPUID bit (Fn8000_0001:EDX[27]).
Signed-off-by: Andre Przywara <andre.przywara@amd.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
cpu_synchronize_state() is a little unreadable since the 'modified'
argument isn't self-explanatory. Simplify it by making it always
synchronize the kernel state into qemu, and automatically flush the
registers back to the kernel if they've been synchronized on this
exit.
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
