In QAPI, absent optional members are distinct from any present value.
We thus represent an optional schema member FOO as two C members: a
FOO with the member's type, and a bool has_FOO. Likewise for function
arguments.
However, has_FOO is actually redundant for a pointer-valued FOO, which
can be null only when has_FOO is false, i.e. has_FOO == !!FOO. Except
for arrays, where we a null FOO can also be a present empty array.
The redundant has_FOO are a nuisance to work with. Improve the
generator to elide them. Uses of has_FOO need to be replaced as
follows.
Tests of has_FOO become the equivalent comparison of FOO with null.
For brevity, this is commonly done by implicit conversion to bool.
Assignments to has_FOO get dropped.
Likewise for arguments to has_FOO parameters.
Beware: code may violate the invariant has_FOO == !!FOO before the
transformation, and get away with it. The above transformation can
then break things. Two cases:
* Absent: if code ignores FOO entirely when !has_FOO (except for
freeing it if necessary), even non-null / uninitialized FOO works.
Such code is known to exist.
* Present: if code ignores FOO entirely when has_FOO, even null FOO
works. Such code should not exist.
In both cases, replacing tests of has_FOO by FOO reverts their sense.
We have to fix the value of FOO then.
To facilitate review of the necessary updates to handwritten code, add
means to opt out of this change, and opt out for all QAPI schema
modules where the change requires updates to handwritten code. The
next few commits will remove these opt-outs in reviewable chunks, then
drop the means to opt out.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20221104160712.3005652-5-armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20221104160712.3005652-3-armbru@redhat.com>
Get isort and pylint tools passing again.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20220211183650.2946895-1-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Comment explaining good-names-rgxs tweaked]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Add trace generation disabled by default and new option --gen-trace to
enable it. The next commit will enable it for qapi/, but not for qga/
and tests/. Making it work for the latter two would involve some Meson
hackery to ensure we generate the trace-events files before trace-tool
uses them. Since we don't actually support tracing there, we'll bypass
that problem.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20220126161130.3240892-4-vsementsov@virtuozzo.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Superfluous #include dropped]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Move error_propagate() to if (err) and make "if (err)" block mandatory.
This is to simplify further commit, which will bring trace events
generation for QMP commands.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20220126161130.3240892-3-vsementsov@virtuozzo.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
The code to check command policy can see special feature flag
'deprecated' as command flag QCO_DEPRECATED. I want to make feature
flag 'unstable' visible there as well, so I can add policy for it.
To let me make it visible, add member @special_features (a bitset of
QapiSpecialFeature) to QmpCommand, and adjust the generator to pass it
through qmp_register_command(). Then replace "QCO_DEPRECATED in
@flags" by QAPI_DEPRECATED in @special_features", and drop
QCO_DEPRECATED.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: John Snow <jsnow@redhat.com>
Message-Id: <20211028102520.747396-7-armbru@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-Id: <20211028102520.747396-4-armbru@redhat.com>
Mechanical change, except for a new assertion in
QAPISchemaEntity.ifcond().
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20210804083105.97531-3-marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Rebased with obvious conflicts, commit message adjusted]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
This policy rejects deprecated input, and thus permits "testing the
future". Implement it for QMP command arguments: reject commands with
deprecated ones. Example: when QEMU is run with -compat
deprecated-input=reject, then
{"execute": "eject", "arguments": {"device": "cd"}}
fails like this
{"error": {"class": "GenericError", "desc": "Deprecated parameter 'device' disabled by policy"}}
When the deprecated parameter is removed, the error will change to
{"error": {"class": "GenericError", "desc": "Parameter 'device' is unexpected"}}
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20210318155519.1224118-11-armbru@redhat.com>
This policy rejects deprecated input, and thus permits "testing the
future". Implement it for QMP commands: make deprecated ones fail.
Example: when QEMU is run with -compat deprecated-input=reject, then
{"execute": "query-cpus"}
fails like this
{"error": {"class": "CommandNotFound", "desc": "Deprecated command query-cpus disabled by policy"}}
When the deprecated command is removed, the error will change to
{"error": {"class": "CommandNotFound", "desc": "The command query-cpus has not been found"}}
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20210318155519.1224118-10-armbru@redhat.com>
This policy suppresses deprecated bits in output, and thus permits
"testing the future". Implement it for QMP command results. Example:
when QEMU is run with -compat deprecated-output=hide, then
{"execute": "query-cpus-fast"}
yields
{"return": [{"thread-id": 9805, "props": {"core-id": 0, "thread-id": 0, "socket-id": 0}, "qom-path": "/machine/unattached/device[0]", "cpu-index": 0, "target": "x86_64"}]}
instead of
{"return": [{"arch": "x86", "thread-id": 22436, "props": {"core-id": 0, "thread-id": 0, "socket-id": 0}, "qom-path": "/machine/unattached/device[0]", "cpu-index": 0, "target": "x86_64"}]}
Note the suppression of deprecated member "arch".
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20210318155519.1224118-4-armbru@redhat.com>
It does happen to be a list (as of now), but we can describe it in more
general terms with no loss in accuracy to allow tuples and other
constructs.
In the future, we can write "ifcond: Sequence[str] = ()" as a default
parameter, which we could not do safely with a Mutable type like a List.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20210216021809.134886-2-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Commit message tweaked]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
For everything typed so far, type this parameter as
Optional[QAPISourceInfo].
In the most generic case, QAPISchemaEntity's info field may be None to
represent types that come from built-in definitions. Although some
Entity types may not currently have any built-in definitions, it is not
easily possible to constrain the type except on an ad-hoc basis using
assertions.
It's easier and simpler, then, to just say it's always an Optional type.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20210201193747.2169670-16-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
QAPISchemaGenCommandVisitor.visit_command() needs to generate the
marshalling function into the current module, and also generate its
registration into the ./init system module. The latter is done
somewhat awkwardly: .__init__() creates a QAPIGenCCode that will not
be written out, each .visit_command() adds its registration to it, and
.visit_end() copies its contents into the ./init module it creates.
Instead provide the means to temporarily switch to another module.
Create the ./init module in .visit_begin(), and generate its initial
part. Add registrations to it in .visit_command(). Finish it in
.visit_end().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20210201193747.2169670-14-jsnow@redhat.com>
With callers to _add_system_module now explicitly using the './' prefix
to indicate a system module, there is no longer any reason to have
separate interfaces for adding system vs user modules; use a unified
interface that differentiates based on the name.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20210201193747.2169670-10-jsnow@redhat.com>
QAPISchemaModularCVisitor._add_system_module() prefixes './' to its name
argument to make it a module name. Pass the module name instead. This
will allow us to coalesce the methods to add modules later on.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20210201193747.2169670-8-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Commit message reworded]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
When boxed is True, expr.py asserts that we must have
arguments. Ultimately, this should mean that if boxed is True that
arg_type should be defined. Mypy cannot infer this, and does not support
'stateful' type inference, e.g.:
```
if x:
assert y is not None
...
if x:
y.etc()
```
does not work, because mypy does not statefully remember the conditional
assertion in the second block. Help mypy out by creating a new local
that it can track more easily.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20210201193747.2169670-2-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Mypy isn't a fan of rebinding a variable with a new data type.
It's easy enough to avoid.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20201009161558.107041-22-jsnow@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Including it in common.py creates a circular import dependency; schema
relies on common, but common.build_params requires a type annotation
from schema. To type this properly, it needs to be moved outside the
cycle.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <20201009161558.107041-18-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Petty style guide fixes and line length enforcement. Not a big win, not
a big loss, but flake8 passes 100% on the qapi module, which gives us an
easy baseline to enforce hereafter.
A note on the flake8 exception: flake8 will warn on *any* bare except,
but pylint's is context-aware and will suppress the warning if you
re-raise the exception.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <20201009161558.107041-9-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Wildcard includes become hard to manage when refactoring and dealing
with circular dependencies with strictly typed mypy.
flake8 also flags each one as a warning, as it is not smart enough to
know which names exist in the imported file.
Remove them and include things explicitly by name instead.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20201009161558.107041-7-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
All of the QAPI include statements are changed to be package-aware, as
explicit relative imports.
A quirk of Python packages is that the name of the package exists only
*outside* of the package. This means that to a module inside of the qapi
folder, there is inherently no such thing as the "qapi" package. The
reason these imports work is because the "qapi" package exists in the
context of the caller -- the execution shim, where sys.path includes a
directory that has a 'qapi' folder in it.
When we write "from qapi import sibling", we are NOT referencing the folder
'qapi', but rather "any package named qapi in sys.path". If you should
so happen to have a 'qapi' package in your path, it will use *that*
package.
When we write "from .sibling import foo", we always reference explicitly
our sibling module; guaranteeing consistency in *where* we are importing
these modules from.
This can be useful when working with virtual environments and packages
in development mode. In development mode, a package is installed as a
series of symlinks that forwards to your same source files. The problem
arises because code quality checkers will follow "import qapi.x" to the
"installed" version instead of the sibling file and -- even though they
are the same file -- they have different module paths, and this causes
cyclic import problems, false positive type mismatch errors, and more.
It can also be useful when dealing with hierarchical packages, e.g. if
we allow qemu.core.qmp, qemu.qapi.parser, etc.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20201009161558.107041-6-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
This patch adds a new 'coroutine' flag to QMP command definitions that
tells the QMP dispatcher that the command handler is safe to be run in a
coroutine.
The documentation of the new flag pretends that this flag is already
used as intended, which it isn't yet after this patch. We'll implement
this in another patch in this series.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20201005155855.256490-9-kwolf@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Use visitor functions' return values to check for failure. Eliminate
error_propagate() that are now unnecessary. Delete @err that are now
unused.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200707160613.848843-41-armbru@redhat.com>
When command FOO has no arguments, its generated qmp_marshal_FOO() is
a bit confusing. Make it simpler:
visit_start_struct(v, NULL, NULL, 0, &err);
if (err) {
goto out;
}
-
- if (!err) {
- visit_check_struct(v, &err);
- }
+ visit_check_struct(v, &err);
visit_end_struct(v, NULL);
if (err) {
goto out;
}
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200424084338.26803-16-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
For QMP commands without arguments, gen_marshal() laboriously
generates a qmp_marshal_FOO() that copes with null @args. Turns
there's just one caller that passes null instead of an empty QDict.
Adjust that caller, and simplify gen_marshal().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200424084338.26803-15-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Since the previous commit, QAPISchemaVisitor.visit_module() is called
just once. Simplify QAPISchemaModularCVisitor accordingly.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20191120182551.23795-7-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Having to include qapi-commands.h just for qmp_init_marshal() is
suboptimal. Generate it into separate files. This lets
monitor/misc.c, qga/main.c, and the generated qapi-commands-FOO.h
include less.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20191120182551.23795-4-armbru@redhat.com>
[Typos in docs/devel/qapi-code-gen.txt fixed]
Reviewed-by: Eric Blake <eblake@redhat.com>
Similarly to features for struct types introduce the feature flags also
for commands. This will allow notifying management layers of fixes and
compatible changes in the behaviour of a command which may not be
detectable any other way.
The changes were heavily inspired by commit 6a8c0b5102.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20191018081454.21369-3-armbru@redhat.com>
The QAPI code generator clocks in at some 3100 SLOC in 8 source files.
Almost 60% of the code is in qapi/common.py. Split it into more
focused modules:
* Move QAPISchemaPragma and QAPISourceInfo to qapi/source.py.
* Move QAPIError and its sub-classes to qapi/error.py.
* Move QAPISchemaParser and QAPIDoc to parser.py. Use the opportunity
to put QAPISchemaParser first.
* Move check_expr() & friends to qapi/expr.py. Use the opportunity to
put the code into a more sensible order.
* Move QAPISchema & friends to qapi/schema.py
* Move QAPIGen and its sub-classes, ifcontext,
QAPISchemaModularCVisitor, and QAPISchemaModularCVisitor to qapi/gen.py
* Delete camel_case(), it's unused since commit e98859a9b9 "qapi:
Clean up after recent conversions to QAPISchemaVisitor"
A number of helper functions remain in qapi/common.py. I considered
moving the code generator helpers to qapi/gen.py, but decided not to.
Perhaps we should rewrite them as methods of QAPIGen some day.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20191018074345.24034-7-armbru@redhat.com>
[Add "# -*- coding: utf-8 -*-" lines]
We reject empty types with 'boxed': true. We don't really need that
to work, but making it work is actually simpler than rejecting it, so
do that.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190913201349.24332-9-armbru@redhat.com>
Not much of an improvement now, but the next commit will profit.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190301154051.23317-4-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
We neglect to call .visit_module() for the special module we use for
built-ins. Harmless, but clean it up anyway. The
tests/qapi-schema/*.out now show the built-in module as 'module None'.
Subclasses of QAPISchemaModularCVisitor need to ._add_module() this
special module to enable code generation for built-ins. When this
hasn't been done, QAPISchemaModularCVisitor.visit_module() does
nothing for the special module. That looks like built-ins could
accidentally be generated into the wrong module when a subclass
neglects to call ._add_module(). Can't happen, because built-ins are
all visited before any other module. But that's non-obvious. Switch
off code generation explicitly.
Rename QAPISchemaModularCVisitor._begin_module() to
._begin_user_module().
New QAPISchemaModularCVisitor._is_builtin_module(), for clarity.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20190214152251.2073-4-armbru@redhat.com>
Wrap generated code with #if/#endif using an 'ifcontext' on
QAPIGenCSnippet objects.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20180703155648.11933-10-marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Line breaks tweaked]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Modify the test visitor to check correct passing of values.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180703155648.11933-5-marcandre.lureau@redhat.com>
[Accidental change to roms/seabios dropped]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
New option will be used to allow commands, which are prepared/need
to run, during preconfig state. Other commands that should be able
to run in preconfig state, should be amended to not expect machine
in initialized state or deal with it.
For compatibility reasons, commands that don't use new flag
'allow-preconfig' explicitly are not permitted to run in
preconfig state but allowed in all other states like they used
to be.
Within this patch allow following commands in preconfig state:
qmp_capabilities
query-qmp-schema
query-commands
query-command-line-options
query-status
exit-preconfig
to allow qmp connection, basic introspection and moving to the next
state.
PS:
set-numa-node and query-hotpluggable-cpus will be enabled later in
a separate patches.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <1526057503-39287-1-git-send-email-imammedo@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[ehabkost: Changed "since 2.13" to "since 3.0"]
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Here "oob" stands for "Out-Of-Band". When "allow-oob" is set, it means
the command allows out-of-band execution.
The "oob" idea is proposed by Markus Armbruster in following thread:
https://lists.gnu.org/archive/html/qemu-devel/2017-09/msg02057.html
This new "allow-oob" boolean will be exposed by "query-qmp-schema" as
well for command entries, so that QMP clients can know which commands
can be used in out-of-band calls. For example the command "migrate"
originally looks like:
{"name": "migrate", "ret-type": "17", "meta-type": "command",
"arg-type": "86"}
And it'll be changed into:
{"name": "migrate", "ret-type": "17", "allow-oob": false,
"meta-type": "command", "arg-type": "86"}
This patch only provides the QMP interface level changes. It does not
contain the real out-of-band execution implementation yet.
Suggested-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180309090006.10018-18-peterx@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: rebase on introspection done by qlit]
Signed-off-by: Eric Blake <eblake@redhat.com>
Move qapi-schema.json to qapi/, so it's next to its modules, and all
files get generated to qapi/, not just the ones generated for modules.
Consistently name the generated files qapi-MODULE.EXT:
qmp-commands.[ch] become qapi-commands.[ch], qapi-event.[ch] become
qapi-events.[ch], and qmp-introspect.[ch] become qapi-introspect.[ch].
This gets rid of the temporary hacks in scripts/qapi/commands.py,
scripts/qapi/events.py, and scripts/qapi/common.py.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180211093607.27351-28-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
[eblake: Fix trailing dot in tpm.c, undo temporary hack for OSX toolchain]
Signed-off-by: Eric Blake <eblake@redhat.com>
In my "build everything" tree, a change to the types in
qapi-schema.json triggers a recompile of about 4800 out of 5100
objects.
The previous commit split up qmp-commands.h, qmp-event.h, qmp-visit.h,
qapi-types.h. Each of these headers still includes all its shards.
Reduce compile time by including just the shards we actually need.
To illustrate the benefits: adding a type to qapi/migration.json now
recompiles some 2300 instead of 4800 objects. The next commit will
improve it further.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180211093607.27351-24-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
[eblake: rebase to master]
Signed-off-by: Eric Blake <eblake@redhat.com>
Our qapi-schema.json is composed of modules connected by include
directives, but the generated code is monolithic all the same: one
qapi-types.h with all the types, one qapi-visit.h with all the
visitors, and so forth. These monolithic headers get included all
over the place. In my "build everything" tree, adding a QAPI type
recompiles about 4800 out of 5100 objects.
We wouldn't write such monolithic headers by hand. It stands to
reason that we shouldn't generate them, either.
Split up generated qapi-types.h to mirror the schema's modular
structure: one header per module. Name the main module's header
qapi-types.h, and sub-module D/B.json's header D/qapi-types-B.h.
Mirror the schema's includes in the headers, so that qapi-types.h gets
you everything exactly as before. If you need less, you can include
one or more of the sub-module headers. To be exploited shortly.
Split up qapi-types.c, qapi-visit.h, qapi-visit.c, qmp-commands.h,
qmp-commands.c, qapi-event.h, qapi-event.c the same way.
qmp-introspect.h, qmp-introspect.c and qapi.texi remain monolithic.
The split of qmp-commands.c duplicates static helper function
qmp_marshal_output_str() in qapi-commands-char.c and
qapi-commands-misc.c. This happens when commands returning the same
type occur in multiple modules. Not worth avoiding.
Since I'm going to rename qapi-event.[ch] to qapi-events.[ch], and
qmp-commands.[ch] to qapi-commands.[ch], name the shards that way
already, to reduce churn. This requires temporary hacks in
commands.py and events.py. Similarly, c_name() must temporarily
be taught to munge '/' in common.py. They'll go away with the rename.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180211093607.27351-23-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: declare a dummy variable in each .c file, to shut up OSX
toolchain warnings about empty .o files, including hacking c_name()]
Signed-off-by: Eric Blake <eblake@redhat.com>
The use of QAPIGen is rather shallow so far: most of the output
accumulation is not converted. Take the next step: convert output
accumulation in the code-generating visitor classes. Helper functions
outside these classes are not converted.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180211093607.27351-20-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
[eblake: rebase to earlier guardstart cleanup]
Signed-off-by: Eric Blake <eblake@redhat.com>
All generated .c are named like their .h, except for qmp-marshal.c and
qmp-commands.h. To add to the confusion, tests-qmp-commands.c falsely
matches generated test-qmp-commands.h.
Get rid of this unnecessary complication.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180211093607.27351-19-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Whenever qapi-schema.json changes, we run six programs eleven times to
update eleven files. Similar for qga/qapi-schema.json. This is
silly. Replace the six programs by a single program that spits out
all eleven files.
The programs become modules in new Python package qapi, along with the
helper library. This requires moving them to scripts/qapi/. While
moving them, consistently drop executable mode bits.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20180211093607.27351-9-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
[eblake: move change to one-line 'blurb' earlier in series, mention mode
bit change as intentional, update qapi-code-gen.txt to match actual
generated events.c file]
Signed-off-by: Eric Blake <eblake@redhat.com>
