Remove pixman switches from configure, should not be needed any more,
configure can figure by itself whenever pixman is needed or not.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20170905140116.28181-3-kraxel@redhat.com
Drop pixman submodule and support for the "internal" pixman build.
pixman should be reasonably well established meanwhile so we don't
need the fallback submodule any more. While being at it also drop
some #ifdefs for pixman versions older than what we require in
configure anyway.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20170905140116.28181-2-kraxel@redhat.com
Nobody has mentioned AIX host support on the mailing list for years,
and we have no test systems for it so it is most likely broken.
We've advertised in configure for two releases now that we plan
to drop support for this host OS, and have had no complaints.
Drop the AIX host support code.
We can also drop the now-unused AIX version of sys_cache_info().
Note that the _CALL_AIX define used in the PPC tcg backend is
also used for Linux PPC64, and so that code should not be removed.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1504545540-8002-1-git-send-email-peter.maydell@linaro.org
We threatened to remove ia64 as host in v2.9.0. Its time has now come.
There are still some usages of defined(__ia64__) throughout the source
code that would be triggered if one were to enable TCI on an ia64 host.
Leave those alone for now.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
KVM guests on s390 need a different page table layout than normal
processes (2kb page table + 2kb page status extensions vs 2kb page table
only). As of today this has to be enabled via the vm.allocate_pgste
sysctl.
Newer kernels (>= 4.12) on s390 check for an S390_PGSTE program header
and enable the pgste page table extensions in that case. This makes the
vm.allocate_pgste sysctl unnecessary. We enable this program header for
the s390 system emulation (qemu-system-s390x) if we build on s390
- for s390 system emulation
- the linker supports --s390-pgste (binutils >= 2.29)
- KVM is enabled
This will allow distributions to disable the global vm.allocate_pgste
sysctl, which will improve the page table allocation for non KVM
processes as only 2kb chunks are necessary.
Cc: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Cc: Alexander Graf <agraf@suse.de>
Cc: Dan Horak <dhorak@redhat.com>
Cc: David Hildenbrand <david@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Janosch Frank <frankja@linux.vnet.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1503483383-199649-1-git-send-email-borntraeger@de.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Learn to compile out vhost-user (net, scsi & upcoming users). Keep it
enabled by default on non-win32, that is assumed to be POSIX. Fail if
trying to enable it on win32.
When trying to make a vhost-user netdev, it gives the following error:
-netdev vhost-user,id=foo,chardev=chr-test: Parameter 'type' expects a netdev backend type
And similar error with the HMP/QMP monitors.
While at it, rename CONFIG_VHOST_NET_TEST CONFIG_VHOST_USER_NET_TEST
since it's a vhost-user specific variable.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Clang 3.9 passes the CONFIG_AVX2_OPT configure test. However, the
supplied <cpuid.h> does not contain the bit_AVX2 define that we use
when detecting whether the routine can be enabled.
Introduce a qemu-specific header that uses the compiler's definition
of __cpuid et al, but supplies any missing bit_* definitions needed.
This avoids introducing any extra ifdefs to util/bufferiszero.c, and
allows quite a few to be removed from tcg/i386/tcg-target.inc.c.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20170719044018.18063-1-rth@twiddle.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Solaris 9 was released in 2002, its successor Solaris 10 was
released in 2005, and Solaris 9 was end-of-lifed in 2014.
Nobody has stepped forward to express interest in supporting
Solaris of any flavour, so removing support for the ancient
versions seems uncontroversial.
In particular, this allows us to remove a use of 'uname'
in configure that won't work if you're cross-compiling.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 1499955697-28045-1-git-send-email-peter.maydell@linaro.org
For a very long time we have used 'uname -s' as our fallback if
we don't identify the target OS using a compiler #define. This
obviously doesn't work for cross-compilation, and we've had
a comment suggesting we fix this in configure for a long time.
Since we now have an exhaustive list of which OSes we can run
on (thanks to commit 898be3e041 making an unrecognized OS
be a fatal error), we know which ones we're missing.
Add check_define tests for the remaining OSes we support. The
defines checked are based on ones we already use in the codebase for
identifying the host OS (with the exception of GNU/kFreeBSD).
We can now set bogus_os immediately rather than doing it later.
We leave the comment about uname being bad untouched, since
there is still a use of it for the fallback for unrecognized
host CPU type.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 1499958932-23839-1-git-send-email-peter.maydell@linaro.org
Don't try to build the ivshmem-server and ivshmem-client tools unless
CONFIG_IVSHMEM is set.
This fixes in passing a build bug on NetBSD, which fails to build the
ivshmem tools because they use shm_open() and on NetBSD that requires
linking against -lrt.
Signed-off-by: Kamil Rytarowski <n54@gmx.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1500021225-4118-4-git-send-email-peter.maydell@linaro.org
[PMM: moved some code into earlier patches; minor bugfixes;
added commit message]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Rather than relying on everywhere that cares about whether the host
supports ivshmem using CONFIG_EVENTFD, make configure set an explicit
CONFIG_IVSHMEM.
Signed-off-by: Kamil Rytarowski <n54@gmx.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1500021225-4118-3-git-send-email-peter.maydell@linaro.org
[PMM: split out from another patch, add commit message]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The AF_ALG socket family is the userspace interface for linux
crypto API, this patch adds af_alg family support and some common
functions for af_alg backend. It'll be used by afalg-backend crypto
latter.
Signed-off-by: Longpeng(Mike) <longpeng2@huawei.com>
Maintainer: modified to report an error if AF_ALG is requested
but cannot be supported
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
This new call is trying to update a requested map cache entry
according to the changes in the physmap. The call is searching
for the entry, unmaps it and maps again at the same place using
a new guest address. If the mapping is dummy this call will
make it real.
This function makes use of a new xenforeignmemory_map2() call
with an extended interface that was recently introduced in
libxenforeignmemory [1].
[1] https://www.mail-archive.com/xen-devel@lists.xen.org/msg113007.html
Signed-off-by: Igor Druzhinin <igor.druzhinin@citrix.com>
Reviewed-by: Paul Durrant <paul.durrant@citrix.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
Commit 161a56a906 added command guest-get-users and requires the
utmpx.h (defined by POSIX) to work. It is however not always available
(e.g. on OpenBSD) therefor a check for its existence is necessary.
Signed-off-by: Tomáš Golembiovský <tgolembi@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
- add a network boot rom for s390 (Thomas Huth)
- migration of storage attributes like the CMMA used/unused state
- PCI related enhancements - full support for aen, ais and zpci
- migration support for css with vmstates (Halil Pasic)
- cpu model enhancements for cpu features
- guarded storage support
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.14 (GNU/Linux)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=2bOV
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/borntraeger/tags/s390x-20170714' into staging
s390x/kvm/migration/cpumodel: fixes, enhancements and cleanups
- add a network boot rom for s390 (Thomas Huth)
- migration of storage attributes like the CMMA used/unused state
- PCI related enhancements - full support for aen, ais and zpci
- migration support for css with vmstates (Halil Pasic)
- cpu model enhancements for cpu features
- guarded storage support
# gpg: Signature made Fri 14 Jul 2017 11:33:04 BST
# gpg: using RSA key 0x117BBC80B5A61C7C
# gpg: Good signature from "Christian Borntraeger (IBM) <borntraeger@de.ibm.com>"
# Primary key fingerprint: F922 9381 A334 08F9 DBAB FBCA 117B BC80 B5A6 1C7C
* remotes/borntraeger/tags/s390x-20170714: (40 commits)
s390x/gdb: add gs registers
s390x/arch_dump: also dump guarded storage control block
s390x/kvm: enable guarded storage
s390x/kvm: Enable KSS facility for nested virtualization
s390x/cpumodel: add esop/esop2 to z12 model
s390x/cpumodel: we are always in zarchitecture mode
s390x/cpumodel: wire up new hardware features
s390x/flic: migrate ais states
s390x/cpumodel: add zpci, aen and ais facilities
s390x: initialize cpu firstly
pc-bios/s390: rebuild s390-ccw.img
pc-bios/s390: add s390-netboot.img
pc-bios/s390-ccw: Link libnet into the netboot image and do the TFTP load
pc-bios/s390-ccw: Add virtio-net driver code
pc-bios/s390-ccw: Add core files for the network bootloading program
roms/SLOF: Update submodule to latest status
pc-bios/s390-ccw: Add code for virtio feature negotiation
pc-bios/s390-ccw: Remove unused structs from virtio.h
pc-bios/s390-ccw: Move byteswap functions to a separate header
pc-bios/s390-ccw: Add a write() function for stdio
...
Conflicts:
target/s390x/kvm.c
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This warning is included in -Wall by clang, but not by GCC (which only
enables it for -Wextra). Include it in the list of warnings we enable
to minimize the differences between the compilers:
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
While ARM could present the xenpv machine, it does not and trying to enable
it breaks compilation. Revert to the previous test which only looked at
$target_name, not $cpu.
Fixes: 3b6b75506d
Reported-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 20170711100049.20513-1-pbonzini@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Our FORTIFY_SOURCE check assumes that $cxx refers to a working C++
compiler, with the result that if you don't happen to have one
then configure will spuriously print
configure: line 4685: c++: command not found
Fix this by adding a 'has $cxx' check.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The configure script prefers pkg-config over sdl-config, but
the "--static-libs" parameter only exists for the latter. With
pkg-config, "--static --libs" have to be used instead.
Buglink: https://bugs.launchpad.net/qemu/+bug/984516
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
This lets you build without TCG (hardware accelerationor qtest only). When
this flag is passed to configure, it will automatically filter out the target
list to only those that support KVM or Xen or HAX.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Check for unsupported targets in target_list, and print an
error early in the configuration process.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This will be useful when the functions are called, early in the configure
process, to filter out targets that do not support hardware acceleration.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We want the wide character functions from the ncurses header.
Unfortunately it doesn't provide them by default, but only
if either:
* NCURSES_WIDECHAR is defined (for ncurses 20111030 and up)
* _XOPEN_SOURCE/_XOPEN_SOURCE_EXTENDED are suitably defined
So far we have been implicitly relying on the latter, because
for GNU libc when we define _GNU_SOURCE this causes libc
to define the _XOPEN_SOURCE macros for us. Unfortunately
this doesn't work on all libcs, because some (like OSX and
musl libc) do not define _XOPEN_SOURCE when _GNU_SOURCE
is defined.
We can't fix this by defining _XOPEN_SOURCE ourselves, because
that also means "and don't provide any functions that aren't in
that standard", and not all libcs provide any way to override
that to also get the non-standard functions. In particular
FreeBSD has no such mechanism, and OSX's _DARWIN_C_SOURCE
doesn't reenable everything (for instance getpagesize()
is still not prototyped if _DARWIN_C_SOURCE and _XOPEN_SOURCE
are both defined).
So we have to define NCURSES_WIDECHAR. (This will only work
if your ncurses is at least 20111030, as older versions
don't honour this macro.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Message-id: 1496414138-7622-1-git-send-email-peter.maydell@linaro.org
This is for the future interoperability & management guide. It includes
the QAPI docs, including the automatically generated ones, other socket
protocols (vhost-user, VNC), and the qcow2 file format.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
move tcg-runtime.c, translate-all.(ch) and translate-common.c into
accel/tcg/ subdirectory and updated related trace-events file.
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Message-Id: <1496383606-18060-4-git-send-email-yang.zhong@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In case the configure script finds both SDL 1.2 and SDL 2.x installed
it still prefers SDL 1.2. Prefer SDL 2.x instead.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20170606105339.3613-3-kraxel@redhat.com
In case the configure script finds both gtk2 and gtk3 installed it
still prefers gtk2 over gtk3. Prefer gtk3 instead.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20170606105339.3613-2-kraxel@redhat.com
Add an XML description for SSE registers (XMM+MXCSR) for both X86
and X86-64 architectures in the GDB stub:
- configure: Define gdb_xml_files for the X86 targets (32 and 64bit).
- gdb-xml/i386-32bit-sse.xml & gdb-xml/i386-64bit-sse.xml: The XML files
that contain a description of the XMM + MXCSR registers.
- gdb-xml/i386-32bit.xml & gdb-xml/i386-64bit.xml: wrappers that include
the XML file of the core registers and the other XML file of the SSE registers.
- target/i386/cpu.c: Modify the gdb_core_xml_file to the new XML wrapper,
modify the gdb_num_core_regs to fit the registers number defined in each
XML file.
Signed-off-by: Abdallah Bouassida <abdallah.bouassida@lauterbach.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There was no possibility to add specific cxx flags using the configure
file. So A new entrance has been created to support it.
Duplication of information in configure and rules.mak. Taking
QEMU_CFLAGS and add them to QEMU_CXXFLAGS, now the value of
QEMU_CXXFLAGS is stored in config-host.mak, so there is no need for
it.
The makefile for libvixl was adding flags for QEMU_CXXFLAGS in
QEMU_CFLAGS because of the addition in rules.mak. That was removed, so
adding them where it should be.
Signed-off-by: Bruno Dominguez <bru.dominguez@gmail.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1496754467-20893-1-git-send-email-bru.dominguez@gmail.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The scripts/qemu-gdb.py file is not easily discoverable. Add a .gdbinit
file so GDB either loads qemu-gdb.py automatically or prints a message
informing the user how to enable them (some systems disable ./.gdbinit
loading for security reasons).
Symlink .gdbinit and the scripts directory in order to make out-of-tree
builds work. The scripts directory is used to find the qemu-gdb.py file
specified by a relative path in .gdbinit.
Suggested-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Eric Blake <eblake@redhat.com>
Message-id: 20170517124042.1430-1-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
We have required a v9 cpu since 9b9c37c364.
However, the flags we were using did not reliably enable v8plus, which
meant that the compiler didn't know it could inline 64-bit atomics.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
NetBSD ships with traditional BSD curses with compatibility with ncurses.
qemu works nicely with the basesystem version of curses(3) from NetBSD.
The only mismatch between curses(3) and ncurses is the lack of
curses_version() in the NetBSD version. This function is used solely in
the configure script, therefore eliminate it from the curses(3) detection.
With this change applied, configure detects correctly curses frontend.
Signed-off-by: Kamil Rytarowski <n54@gmx.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Add missing support for "preallocation=falloc" to the Gluster block
driver. This change bases its logic on that of block/file-posix.c and
removed the gluster_supports_zerofill() and qemu_gluster_zerofill()
functions in favour of #ifdef checks in an easy to read
switch-statement.
Both glfs_zerofill() and glfs_fallocate() have been introduced with
GlusterFS 3.5.0 (pkg-config glusterfs-api = 6). A #define for the
availability of glfs_fallocate() has been added to ./configure.
Reported-by: Satheesaran Sundaramoorthi <sasundar@redhat.com>
Signed-off-by: Niels de Vos <ndevos@redhat.com>
Message-id: 20170528063114.28691-1-ndevos@redhat.com
URL: https://bugzilla.redhat.com/1450759
Signed-off-by: Niels de Vos <ndevos@redhat.com>
Signed-off-by: Jeff Cody <jcody@redhat.com>
Now that 9pfs and virtfs-proxy-helper have been converted to utimensat(),
we don't need to keep qemu_utimens() anymore.
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Many users now prefer to use drive_mirror over NBD as an
alternative to the older migrate -b option; drive_mirror is
more complex to setup but gives you more options (e.g. only
migrating some of the disks if some of them are shared).
Allow the large chunk of block migration code to be compiled
out for those who don't use it.
Based on a downstream-patch we've had for a while by Jeff Cody.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
--
- When compiled out, allow seting block only with false value (eric)
QEMU does not depends on libxencall, it was added because it was a
missing link dependency of libxendevicemodel, but now the later should
be built properly.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
I volunteer to review NetBSD patches.
Adding myself will help to not miss some of them.
Restore NetBSD as a maintained host.
All patches to make qemu/pkgsrc building have been emitted to review.
Signed-off-by: Kamil Rytarowski <n54@gmx.com>
Message-id: 20170513022143.2838-1-n54@gmx.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This pull request supersedes the one from yesterday (20170510), fixing
an important style bug in one patch, and adding an extra couple of
simple patches.
Highlights of this set:
* Some fixes for POWER9
* TCG support for POWER9 radix MMU
* VGA rom for Mac machine types
* Fixes for the XICS interrupt controller
* MTTCG support for ppc targets
As suggested by Paolo, I've tried to add the Docker tests to my
standard pre-pull-request tests. I haven't wholly suceeded; this has
been tested with some of the Docker images, but others I haven't
managed due to problems that as best I can tell are not due to
problems in this patch series. I'll continue working on this for
future pull requests. Specifically, 'travis', 'fedora', and 'centos6'
seem to work. 'min-glib' jammed while gtesting moxie, which seems
very unlikely to be caused by this series. 'ubuntu', 'debian' and
'debian-bootstrap' hit build errors almost immediately that look like
problems with the container configuration, and 'debian-*-cross' hit
build errors later on which also look like missing dependencies from
the container.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=D0Hk
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'dgibson/tags/ppc-for-2.10-20170511' into staging
ppc patch queue for 2017-05-11
This pull request supersedes the one from yesterday (20170510), fixing
an important style bug in one patch, and adding an extra couple of
simple patches.
Highlights of this set:
* Some fixes for POWER9
* TCG support for POWER9 radix MMU
* VGA rom for Mac machine types
* Fixes for the XICS interrupt controller
* MTTCG support for ppc targets
As suggested by Paolo, I've tried to add the Docker tests to my
standard pre-pull-request tests. I haven't wholly suceeded; this has
been tested with some of the Docker images, but others I haven't
managed due to problems that as best I can tell are not due to
problems in this patch series. I'll continue working on this for
future pull requests. Specifically, 'travis', 'fedora', and 'centos6'
seem to work. 'min-glib' jammed while gtesting moxie, which seems
very unlikely to be caused by this series. 'ubuntu', 'debian' and
'debian-bootstrap' hit build errors almost immediately that look like
problems with the container configuration, and 'debian-*-cross' hit
build errors later on which also look like missing dependencies from
the container.
# gpg: Signature made Thu 11 May 2017 05:13:46 AM BST
# gpg: using RSA key 0x6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>"
# gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>"
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>"
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>"
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392
* dgibson/tags/ppc-for-2.10-20170511: (23 commits)
target/ppc: Avoid printing wrong aliases in CPU help text
pnv: Fix build failures on some host platforms
target/ppc: Allow workarounds for POWER9 DD1
spapr: Don't accidentally advertise HTM support on POWER9
ppc: xics: fix compilation with CentOS 6
target/ppc: Enable RADIX mmu mode for pseries TCG guest
target/ppc: Implement ISA V3.00 radix page fault handler
target/ppc: Change tlbie invalid fields for POWER9 support
target/ppc: Update tlbie to check privilege level based on GTSE
target/ppc: Set UPRT and GTSE on all cpus in H_REGISTER_PROCESS_TABLE
ppc: add qemu_vga.ndrv ROM to fw_cfg interface for NewWorld Macs
ppc: add qemu_vga.ndrv ROM to fw_cfg interface for OldWorld Macs
Add QemuMacDrivers qemu_vga.ndrv revision d4e7d7a built as submodule
Add QemuMacDrivers as submodule
ppc/xics: preserve P and Q bits for KVM IRQs
ppc/xics: Fix stale irq->status bits after get
target/ppc: do not reset reserve_addr in exec_enter
tcg: enable MTTCG by default for PPC64 on x86
cpus: Fix CPU unplug for MTTCG
target/ppc: Generate fence operations
...
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The GThread implementation is not functional enough to actually
run QEMU reliably. While it was potentially useful for debugging,
we have a scripts/qemugdb/coroutine.py to enable tracing of
ucontext coroutines in GDB, so that removes the only reason for
GThread to exist.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Acked-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This enables the multi-threaded system emulation by default for PPC64
guests using the x86_64 TCG back-end.
Signed-off-by: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
QEMU_BUILD_BUG_ON should use C11's _Static_assert, if the compiler supports it,
to provide more readable messages on failure.
We check for _Static_assert in configure, and set CONFIG_STATIC_ASSERT
accordingly. QEMU_BUILD_BUG_ON invokes _Static_assert if CONFIG_STATIC_ASSERT
is defined, and reverts to the old way otherwise.
That way, systems without C11 conforming compiler will still have the old
messages, as verified by intentionally breaking the configure check.
the following example output was generated by inverting the condition in
QEMU_BUILD_BUG_ON:
without _Static_assert:
> In file included from /qemu/include/qemu/osdep.h:36:0,
> from /qemu/qga/commands.c:13:
> /qemu/qga/commands.c: In function ‘qmp_guest_exec_status’:
> /qemu/include/qemu/compiler.h:89:12: error: negative width in bit-field ‘<anonymous>’
> struct { \
> ^
> /qemu/include/qemu/compiler.h:96:38: note: in expansion of macro QEMU_BUILD_BUG_ON_STRUCT’
> #define QEMU_BUILD_BUG_ON(x) typedef QEMU_BUILD_BUG_ON_STRUCT(x) \
> ^~~~~~~~~~~~~~~~~~~~~~~~
> /qemu/include/qemu/atomic.h:146:5: note: in expansion of macro ‘QEMU_BUILD_BUG_ON’
> QEMU_BUILD_BUG_ON(sizeof(*ptr) > sizeof(void *)); \
> ^~~~~~~~~~~~~~~~~
> /qemu/include/qemu/atomic.h:417:5: note: in expansion of macro ‘atomic_load_acquire’
> atomic_load_acquire(ptr)
> ^~~~~~~~~~~~~~~~~~~
> /qemu/qga/commands.c:160:21: note: in expansion of macro ‘atomic_mb_read’
> bool finished = atomic_mb_read(&gei->finished);
> ^~~~~~~~~~~~~~
with _Static_assert:
> In file included from /qemu/include/qemu/osdep.h:36:0,
> from /qemu/qga/commands.c:13:
> /qemu/qga/commands.c: In function ‘qmp_guest_exec_status’:
> /qemu/include/qemu/compiler.h:94:30: error: static assertion failed: "not expecting: sizeof(*&gei->finished) > sizeof(void *)"
> #define QEMU_BUILD_BUG_ON(x) _Static_assert((x), #x)
> ^
> /qemu/include/qemu/atomic.h:146:5: note: in expansion of macro ‘QEMU_BUILD_BUG_ON’
> QEMU_BUILD_BUG_ON(sizeof(*ptr) > sizeof(void *)); \
> ^~~~~~~~~~~~~~~~~
> /qemu/include/qemu/atomic.h:417:5: note: in expansion of macro ‘atomic_load_acquire’
> atomic_load_acquire(ptr)
> ^~~~~~~~~~~~~~~~~~~
> /qemu/qga/commands.c:160:21: note: in expansion of macro ‘atomic_mb_read’
> bool finished = atomic_mb_read(&gei->finished);
> ^~~~~~~~~~~~~~
Signed-off-by: Andreas Grapentin <andreas@grapentin.org>
Message-Id: <20170314165953.18506-1-andreas@grapentin.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch implements XML target description support for X86 and X86-64
architectures in the GDB stub, as the way with ARM and PowerPC:
- gdb-xml/32bit-core.xml & gdb-xml/64bit-core.xml: Adding the XML target
description files, these files are picked from GDB source code.
- configure: Define gdb_xml_files for X86 targets.
- target/i386/cpu.c: Define gdb_core_xml_file and gdb_arch_name to add
XML awareness for this architecture, modify the gdb_num_core_regs to
fit the registers number defined in each XML file.
Signed-off-by: Abdallah Bouassida <abdallah.bouassida@lauterbach.com>
Message-Id: <2b3c8119-1602-28c7-eab4-296593877103@lauterbach.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Since commit "c53eeaf75a04 configure: eliminate Python dependency for
--help", configure --help fails to produce the list of available trace
backends if invoked out-of-tree. It also spits the following error:
grep: scripts/tracetool/backend/*.py: No such file or directory
This patch simply adds the missing $source_path to fix it.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-id: 149321376763.7874.12797658801011614451.stgit@bahia
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
A command that will list all currently logged in users, and the time
since when they are logged in.
Examples:
virsh # qemu-agent-command F25 '{ "execute": "guest-get-users" }'
{"return":[{"login-time":1490622289.903835,"user":"root"}]}
virsh # qemu-agent-command Win2k12r2 '{ "execute": "guest-get-users" }'
{"return":[{"login-time":1490351044.670552,"domain":"LADIDA",
"user":"Administrator"}]}
Signed-off-by: Vinzenz Feenstra <vfeenstr@redhat.com>
* make g_hash_table_contains compat func inline to avoid
unused warnings
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
