Rather than passing an opcode to a helper, fully decode the
operation at translate time. Use clear_tail_16 to zap the
balance of the SVE register with the AdvSIMD write.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200514212831.31248-7-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Rather than passing an opcode to a helper, fully decode the
operation at translate time. Use clear_tail_16 to zap the
balance of the SVE register with the AdvSIMD write.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200514212831.31248-6-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Do not yet convert the helpers to loop over opr_sz, but the
descriptor allows the vector tail to be cleared. Which fixes
an existing bug vs SVE.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200514212831.31248-5-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Do not yet convert the helpers to loop over opr_sz, but the
descriptor allows the vector tail to be cleared. Which fixes
an existing bug vs SVE.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200514212831.31248-4-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
With this conversion, we will be able to use the same helpers
with sve. This also fixes a bug in which we failed to clear
the high bits of the SVE register after an AdvSIMD operation.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200514212831.31248-3-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
With this conversion, we will be able to use the same helpers
with sve. In particular, pass 3 vector parameters for the
3-operand operations; for advsimd the destination register
is also an input.
This also fixes a bug in which we failed to clear the high bits
of the SVE register after an AdvSIMD operation.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200514212831.31248-2-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Do not explicitly store zero to the NEON high part
when we can pass !is_q to clear_vec_high.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200519212453.28494-3-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The 8-byte store for the end a !is_q operation can be
merged with the other stores. Use a no-op vector move
to trigger the expand_clr portion of tcg_gen_gvec_mov.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200519212453.28494-2-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Include 64-bit element size in preparation for SVE2.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200513163245.17915-17-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Include 64-bit element size in preparation for SVE2.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200513163245.17915-16-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Provide a functional interface for the vector expansion.
This fits better with the existing set of helpers that
we provide for other operations.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200513163245.17915-13-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
These operations do not touch fp_status.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200513163245.17915-12-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Provide a functional interface for the vector expansion.
This fits better with the existing set of helpers that
we provide for other operations.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200513163245.17915-11-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Provide a functional interface for the vector expansion.
This fits better with the existing set of helpers that
we provide for other operations.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200513163245.17915-10-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Provide a functional interface for the vector expansion.
This fits better with the existing set of helpers that
we provide for other operations.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200513163245.17915-8-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Provide a functional interface for the vector expansion.
This fits better with the existing set of helpers that
we provide for other operations.
Macro-ize the 5 nearly identical comparisons.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200513163245.17915-7-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Now that we've converted all cases to gvec, there is quite a bit
of dead code at the end of the function. Remove it.
Sink the call to gen_gvec_fn2i to the end, loading a function
pointer within the switch statement.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200513163245.17915-6-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The functions eliminate duplication of the special cases for
this operation. They match up with the GVecGen2iFn typedef.
Add out-of-line helpers. We got away with only having inline
expanders because the neon vector size is only 16 bytes, and
we know that the inline expansion will always succeed.
When we reuse this for SVE, tcg-gvec-op may decide to use an
out-of-line helper due to longer vector lengths.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200513163245.17915-4-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Create vectorized versions of handle_shri_with_rndacc
for shift+round and shift+round+accumulate. Add out-of-line
helpers in preparation for longer vector lengths from SVE.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200513163245.17915-3-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The functions eliminate duplication of the special cases for
this operation. They match up with the GVecGen2iFn typedef.
Add out-of-line helpers. We got away with only having inline
expanders because the neon vector size is only 16 bytes, and
we know that the inline expansion will always succeed.
When we reuse this for SVE, tcg-gvec-op may decide to use an
out-of-line helper due to longer vector lengths.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200513163245.17915-2-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In a few cases, we're able to remove some manual replication.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We're going to want at least some of the NeonGen* typedefs
for the refactored 32-bit Neon decoder, so move them all
to translate.h since it makes more sense to keep them in
one group.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200430181003.21682-23-peter.maydell@linaro.org
These instructions are often used in glibc's string routines.
They were the final uses of the 32-bit at a time neon helpers.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200418162808.4680-1-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Coverity reports a BAD_SHIFT with ctz32(imm5), with imm5 == 0.
This is an invalid encoding, but we diagnose that just below
by rejecting size > 3. Avoid the warning by sinking the
computation of index below the check.
Reported-by: Coverity (CID 1421965)
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200320160622.8040-4-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Coverity raised a shed-load of errors cascading from inferring
that clz32(immh) might yield 32, from immh might be 0.
While immh cannot be 0 from encoding, it is not obvious even to
a human how we've checked that: via the filtering provided by
data_proc_simd[].
Reported-by: Coverity (CID 1421923, and more)
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200320160622.8040-3-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We must include the tag in the FAR_ELx register when raising
an addressing exception. Which means that we should not clear
out the tag during translation.
We cannot at present comply with this for user mode, so we
retain the clean_data_tbi function for the moment, though it
no longer does what it says on the tin for system mode. This
function is to be replaced with MTE, so don't worry about the
slight misnaming.
Buglink: https://bugs.launchpad.net/qemu/+bug/1867072
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200308012946.16303-3-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This data access was forgotten when we added support for cleaning
addresses of TBI information.
Fixes: 3a471103ac
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200302175829.2183-8-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
If by context we know that we're in AArch64 mode, we need not
test for M-profile when reconstructing the full ARMMMUIdx.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20200302175829.2183-4-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The v8.4-RCPC extension implements some new instructions:
* LDAPUR, LDAPURB, LDAPURH, LDAPRSB, LDAPRSH, LDAPRSW
* STLUR, STLURB, STLURH
These are all in a new subgroup of encodings that sits below the
top-level "Loads and Stores" group in the Arm ARM.
The STLUR* instructions have standard store-release semantics; the
LDAPUR* have Load-AcquirePC semantics, but (as with LDAPR*) we choose
to implement them as the slightly stronger Load-Acquire.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200224172846.13053-4-peter.maydell@linaro.org
The v8.3-RCPC extension implements three new load instructions
which provide slightly weaker consistency guarantees than the
existing load-acquire operations. For QEMU we choose to simply
implement them with a full LDAQ barrier.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200224172846.13053-3-peter.maydell@linaro.org
We still need two different helpers, since NEON and SVE2 get the
inputs from different locations within the source vector. However,
we can convert both to the same internal form for computation.
The sve2 helper is not used yet, but adding it with this patch
helps illustrate why the neon changes are helpful.
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200216214232.4230-5-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The gvec form will be needed for implementing SVE2.
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200216214232.4230-4-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The gvec form will be needed for implementing SVE2.
Extend the implementation to operate on uint64_t instead of uint32_t.
Use a counted inner loop instead of terminating when op1 goes to zero,
looking toward the required implementation for ARMv8.4-DIT.
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200216214232.4230-3-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
These instructions shift left or right depending on the sign
of the input, and 7 bits are significant to the shift. This
requires several masks and selects in addition to the actual
shifts to form the complete answer.
That said, the operation is still a small improvement even for
two 64-bit elements -- 13 vector operations instead of 2 * 7
integer operations.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200216214232.4230-2-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Writes to AdvSIMD registers flush the bits above 128.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200214194643.23317-5-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Writes to AdvSIMD registers flush the bits above 128.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200214194643.23317-4-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Writes to AdvSIMD registers flush the bits above 128.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200214194643.23317-3-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200208125816.14954-19-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
For aarch64, there's a dedicated msr (imm, reg) insn.
For aarch32, this is done via msr to cpsr. Writes from el0
are ignored, which is already handled by the CPSR_USER mask.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200208125816.14954-12-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
To implement PAN, we will want to swap, for short periods
of time, to a different privileged mmu_idx. In addition,
we cannot do this with flushing alone, because the AT*
instructions have both PAN and PAN-less versions.
Add the ARMMMUIdx*_PAN constants where necessary next to
the corresponding ARMMMUIdx* constant.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200208125816.14954-3-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The EL2&0 translation regime is affected by Load Register (unpriv).
The code structure used here will facilitate later changes in this
area for implementing UAO and NV.
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200206105448.4726-36-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Create a predicate to indicate whether the regime has
both positive and negative addresses.
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200206105448.4726-21-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This is part of a reorganization to the set of mmu_idx.
This emphasizes that they apply to the Secure EL1&0 regime.
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200206105448.4726-13-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The EL1&0 regime is the only one that uses 2-stage translation.
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200206105448.4726-11-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This is part of a reorganization to the set of mmu_idx.
This emphasizes that they apply to the EL1&0 regime.
The ultimate goal is
-- Non-secure regimes:
ARMMMUIdx_E10_0,
ARMMMUIdx_E20_0,
ARMMMUIdx_E10_1,
ARMMMUIdx_E2,
ARMMMUIdx_E20_2,
-- Secure regimes:
ARMMMUIdx_SE10_0,
ARMMMUIdx_SE10_1,
ARMMMUIdx_SE3,
-- Helper mmu_idx for non-secure EL1&0 stage1 and stage2
ARMMMUIdx_Stage2,
ARMMMUIdx_Stage1_E0,
ARMMMUIdx_Stage1_E1,
The 'S' prefix is reserved for "Secure". Unless otherwise specified,
each mmu_idx represents all stages of translation.
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200206105448.4726-10-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When support for the AHP flag was added we inexplicably only freed the
new temps in one of the two legs. Move those tcg_temp_free to the same
level as the allocation to fix that leak.
Fixes: 486624fcd3
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20200131153439.26027-1-alex.bennee@linaro.org
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We currently search both the root and the tcg/ directories for tcg
files:
$ git grep '#include "tcg/' | wc -l
28
$ git grep '#include "tcg[^/]' | wc -l
94
To simplify the preprocessor search path, unify by expliciting the
tcg/ directory.
Patch created mechanically by running:
$ for x in \
tcg.h tcg-mo.h tcg-op.h tcg-opc.h \
tcg-op-gvec.h tcg-gvec-desc.h; do \
sed -i "s,#include \"$x\",#include \"tcg/$x\"," \
$(git grep -l "#include \"$x\""); \
done
Acked-by: David Gibson <david@gibson.dropbear.id.au> (ppc parts)
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200101112303.20724-2-philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Before we introduce blocking semihosting calls we need to ensure we
can restart the system on semi hosting exception. To be able to do
this the EXCP_SEMIHOST operation should be idempotent until it finally
completes. Practically this means ensureing we only update the pc
after the semihosting call has completed.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Keith Packard <keithp@keithp.com>
Tested-by: Keith Packard <keithp@keithp.com>
