pc.h and apic.h are not needed; apic.h would drag in x86 CPUState and
is now included directly for TARGET_I386.
isa.h is already #included from mc146818rtc.h.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
* qemu-kvm/uq/master:
pc-bios: update kvmvapic.bin
kvmvapic: Use optionrom helpers
optionsrom: Reserve space for checksum
kvmvapic: Simplify mp/up_set_tpr
kvmvapic: Introduce TPR access optimization for Windows guests
kvmvapic: Add option ROM
target-i386: Add infrastructure for reporting TPR MMIO accesses
Allow to use pause_all_vcpus from VCPU context
Process pending work while waiting for initial kick-off in TCG mode
Remove useless casts from cpu iterators
kvm: Set cpu_single_env only once
kvm: Synchronize cpu state in kvm_arch_stop_on_emulation_error()
Make the rtc wake up the guest when the alarm fires.
Add acpi windup to property support RTC_EN, so guests
can enable and disable this.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This patch switches pc s3 suspend over to the new infrastructure.
The cmos_s3 qemu_irq is killed, the new notifier is used instead.
The xen hack goes away with that too, the hypercall can simply be
done in a notifier function now.
This patch also makes the guest actually stay suspended instead
of leaving suspend instantly, so it is useful for more than just
testing whenever the suspend/resume cycle actually works.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This will allow the APIC core to file a TPR access report. Depending on
the accelerator and kernel irqchip mode, it will either be delivered
right away or queued for later reporting.
In TCG mode, we can restart the triggering instruction and can therefore
forward the event directly. KVM does not allows us to restart, so we
postpone the delivery of events recording in the user space APIC until
the current instruction is completed.
Note that KVM without in-kernel irqchip will report the address after
the instruction that triggered the access.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Replace device_init() with generalized type_init().
While at it, unify naming convention: type_init([$prefix_]register_types)
Also, type_init() is a function, so add preceding blank line where
necessary and don't put a semicolon after the closing brace.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Cc: Anthony Liguori <anthony@codemonkey.ws>
Cc: malc <av1474@comtv.ru>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This is mostly code movement although not entirely. This makes properties part
of the Object base class which means that we can now start using Object in a
meaningful way outside of qdev.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This was done in a mostly automated fashion. I did it in three steps and then
rebased it into a single step which avoids repeatedly touching every file in
the tree.
The first step was a sed-based addition of the parent type to the subclass
registration functions.
The second step was another sed-based removal of subclass registration functions
while also adding virtual functions from the base class into a class_init
function as appropriate.
Finally, a python script was used to convert the DeviceInfo structures and
qdev_register_subclass functions to TypeInfo structures, class_init functions,
and type_register_static calls.
We are almost fully converted to QOM after this commit.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Allow to configure the MC146818 RTC via the new lost tick policy
property and replace rtc_td_hack with this mechanism.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This converts two devices at once because PIC subclasses ISA and converting
subclasses independently is extremely hard.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
When an rtc interrupt is reinjected immediately after being acked,
other interrupts should not be reinjected, so do clear their bits.
Also, if the periodic interrupts have been disabled before acking,
do not reinject, as the guest might get very confused!
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Hours in 12-hour mode are in the 1-12 range, not 0-11.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
NULL is a valid bus/device, so there is no change in behaviour.
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This really shows the power of dynamic object properties compared to qdev
static properties.
This property represents a complex structure who's format is preserved over the
wire. This is enabled by visitors.
It also shows an entirely synthetic property that is not tied to device state.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Make use of the new clock reset notifier to update the RTC whenever
rtc_clock is the host clock and that happens to jump backward. This
avoids that the RTC stalls for the period the host clock was set back.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This was done with:
sed -i 's/qemu_get_clock\>/qemu_get_clock_ns/' \
$(git grep -l 'qemu_get_clock\>' )
sed -i 's/qemu_new_timer\>/qemu_new_timer_ns/' \
$(git grep -l 'qemu_new_timer\>' )
after checking that get_clock and new_timer never occur twice
on the same line. There were no missed occurrences; however, even
if there had been, they would have been caught by the compiler.
There was exactly one false positive in qemu_run_timers:
- current_time = qemu_get_clock (clock);
+ current_time = qemu_get_clock_ns (clock);
which is of course not in this patch.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
For some unknown reason, the MIPS kernel briefly changes the RTC to
binary mode during boot, switch back to BCD mode and read the time. As
the registers are updated only every second, they may still be in the
old format when they are read.
This patch forces a register update immediately after a format change
(BCD/binary or 12/24H). This avoid long fsck during boot due to time
wrap.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Store all io ports used by device in ISADevice structure.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Convert alarm time from BCD if needed before comparing with current
time.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Allow the intercept the RTC IRQ for the HPET legacy mode. Then push
routing to IRQ8 completely into the HPET. This allows to turn
hpet_in_legacy_mode() into a private function. Furthermore, this stops
the RTC from clearing IRQ8 even if the HPET is in control.
This patch comes with a side effect: The RTC timers will no longer be
stoppend when there is no IRQ consumer, possibly causing a minor
performance degration. But as the guest may want to redirect the RTC to
the SCI in that mode, it should normally disable unused IRQ source
anyway.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
To match rtc_xxx with qdev, make rtc_xxx accept and return ISADevice
instead of RTCState.
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
After defining the required alias ID, we can push vmstate registration
of mc146818rtc to qdev.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
x86 definitions (especially CPUState uses) prevent many files from
being compiled within libhw.
Move x86 specific declarations (APIC stuff) to a separate file.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
On hosts without high-res timers it is impossible to inject rtc interrupt
faster then 1kHz. Windows sometimes configures RTC to generate 1kHz
interrupts, so we can't inject missed interrupts when running on such
hosts. Always injecting an interrupt on REG_C read is also not an option
since Windows wait for REG_C to become zero with interrupt disabled
during boot. This patch uses mixed approach: accelerate timer + inject
up to 1000 interrupts on REG_C read.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
It was used for Acer Pica 61 emulation, removed in 2008
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Like qdev_init(), but terminate program via hw_error() instead of
returning an error value.
Use it instead of qdev_init() where terminating the program on failure
is okay, either because it's during machine construction, or because
we know that failure can't happen.
Because relying in the latter is somewhat unclean, and the former is
not always obvious, it would be nice to go back to qdev_init() in the
not-so-obvious cases, only with proper error handling. I'm leaving
that for another day, because it involves making sure that error
values are properly checked by all callers.
Patchworks-ID: 35168
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Switch RTC emulations to the new host_clock instead of vm_clock by
default. This has the advantage that the emulated RTC will follow
automatically the host time while it might be tuned via NTP. vm_clock
can still be selected by passing '-rtc clock=vm' on the command line.
Note that some RTC emulations (at least M48T59) already use the host
time unconditionally while others (namely MC146818) do not. This patch
introduces the required infrastructure for selecting the base clock but
only converts MC146818 for now.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
In the very least, a change like this requires discussion on the list.
The naming convention is goofy and it causes a massive merge problem. Something
like this _must_ be presented on the list first so people can provide input
and cope with it.
This reverts commit 99a0949b72.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The RTC emulation does not set the IRQ flags independent of the IRQ enable bits.
The original MC146818A datasheet from 1984 notes:
"flag bits in Register C [...] are set independent of the
state of the corresponding enable bits in Register B"
Similar sections can be found in newer documentation e.g. in rtc82885.
Qemu and Bochs set the IRQ flags only if they are enabled,
which breaks drivers polling on them.
The following patch corrects this for the update-ended-flag in Qemu only.
It does not fix the handling of the other flags.
Signed-off-by: Bernhard Kauer <kauer@tudos.org>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This reverts commit 8217606e6e (and
updates later added users of qemu_register_reset), we solved the
problem it originally addressed less invasively.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The parameter is always zero except when registering the three internal
io regions (ROM, unassigned, notdirty). Remove the parameter to reduce
the API's power, thus facilitating future change.
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
On reset:
Periodic Interrupt Enable (PIE) bit is cleared to zero
Alarm Interrupt Enable (AIE) bit is cleared to zero
Update ended Interrupt Flag (UF) bit is cleared to zero
Interrupt Request status Flag (IRQF) bit is cleared to zero
Periodic Interrupt Flag (PF) bit is cleared to zero
Alarm Interrupt Flag (AF) bit is cleared to zero
Square Wave output Enable (SQWE) zero
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
