The fd: URI can currently trigger two different types of migration, a
TCP migration using sockets and a file migration using a plain
file. This is in conflict with the recently introduced (8.2) QMP
migrate API that takes structured data as JSON-like format. We cannot
keep the same backend for both types of migration because with the new
API the code is more tightly coupled to the type of transport. This
means a TCP migration must use the 'socket' transport and a file
migration must use the 'file' transport.
If we keep allowing fd: when using a file, this creates an issue when
the user converts the old-style (fd:) to the new style ("transport":
"socket") invocation because the file descriptor in question has
previously been allowed to be either a plain file or a socket.
To avoid creating too much confusion, we can simply deprecate the fd:
+ file usage, which is thought to be rarely used currently and instead
establish a 1:1 correspondence between fd: URI and socket transport,
and file: URI and file transport.
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
The 'compress' migration capability enables the old compression code
which has shown issues over the years and is thought to be less stable
and tested than the more recent multifd-based compression. The old
compression code has been deprecated in 8.2 and now is time to remove
it.
Deprecation commit 864128df46 ("migration: Deprecate old compression
method").
Acked-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
The block migration has been considered obsolete since QEMU 8.2 in
favor of the more flexible storage migration provided by the
blockdev-mirror driver. Two releases have passed so now it's time to
remove it.
Deprecation commit 66db46ca83 ("migration: Deprecate block
migration").
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
The block migration is considered obsolete and has been deprecated in
8.2. Remove the migrate command option that enables it. This only
affects the QMP and HMP commands, the feature can still be accessed by
setting the migration 'block' capability. The whole feature will be
removed in a future patch.
Deprecation commit 8846b5bfca ("migration: migrate 'blk' command
option is deprecated.").
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
The block incremental option for block migration has been deprecated
in 8.2 in favor of using the block-mirror feature. Remove it now.
Deprecation commit 40101f320d ("migration: migrate 'inc' command
option is deprecated.").
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
The 'skipped' field of the MigrationStats struct has been deprecated
in 8.1. Time to remove it.
Deprecation commit 7b24d32634 ("migration: skipped field is really
obsolete.").
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Now we do set MIGRATION_FAILED state, but don't give a chance to
orchestrator to query migration state and get the error.
Let's provide a possibility for QMP-based orchestrators to get an error
like with outgoing migration.
For hmp_migrate_incoming(), let's enable the new behavior: HMP is not
and ABI, it's mostly intended to use by developer and it makes sense
not to stop the process.
For x-exit-preconfig, let's keep the old behavior:
- it's called from init(), so here we want to keep current behavior by
default
- it does exit on error by itself as well
So, if we want to change the behavior of x-exit-preconfig, it should be
another patch.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Acked-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Unify error reporting in the function. This simplifies the following
commit, which will not-exit-on-error behavior variant to the function.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
It's bad idea to leave critical section with error object freed, but
s->error still set, this theoretically may lead to use-after-free
crash. Let's avoid it.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Make call to migration_incoming_state_destroy(), instead of doing only
partial of it.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
migration/ram.c: API Conversion qemu_mutex_lock(),
and qemu_mutex_unlock() to WITH_QEMU_LOCK_GUARD macro
Signed-off-by: Will Gyda <vilhelmgyda@gmail.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmY5z/QUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroP1YQf/WMAoB/lR31fzu/Uh36hF1Ke/NHNU
gefqKRAol6xJXxavKH8ym9QMlCTzrCLVt0e8RalZH76gLqYOjRhSLSSL+gUo5HEo
lsGSfkDAH2pHO0ZjQUkXcjJQQKkH+4+Et8xtyPc0qmq4uT1pqQZRgOeI/X/DIFNb
sMoKaRKfj+dB7TSp3qCSOp77RqL13f4QTP8mUQ4XIfzDDXdTX5n8WNLnyEIKjoar
ge4U6/KHjM35hAjCG9Av/zYQx0E084r2N2OEy0ESYNwswFZ8XYzTuL4SatN/Otf3
F6eQZ7Q7n6lQbTA+k3J/jR9dxiSqVzFQnL1ePGoe9483UnxVavoWd0PSgw==
=jCyB
-----END PGP SIGNATURE-----
Merge tag 'for-upstream' of https://gitlab.com/bonzini/qemu into staging
* target/i386/tcg: conversion of one byte opcodes to table-based decoder
# -----BEGIN PGP SIGNATURE-----
#
# iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmY5z/QUHHBib256aW5p
# QHJlZGhhdC5jb20ACgkQv/vSX3jHroP1YQf/WMAoB/lR31fzu/Uh36hF1Ke/NHNU
# gefqKRAol6xJXxavKH8ym9QMlCTzrCLVt0e8RalZH76gLqYOjRhSLSSL+gUo5HEo
# lsGSfkDAH2pHO0ZjQUkXcjJQQKkH+4+Et8xtyPc0qmq4uT1pqQZRgOeI/X/DIFNb
# sMoKaRKfj+dB7TSp3qCSOp77RqL13f4QTP8mUQ4XIfzDDXdTX5n8WNLnyEIKjoar
# ge4U6/KHjM35hAjCG9Av/zYQx0E084r2N2OEy0ESYNwswFZ8XYzTuL4SatN/Otf3
# F6eQZ7Q7n6lQbTA+k3J/jR9dxiSqVzFQnL1ePGoe9483UnxVavoWd0PSgw==
# =jCyB
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 06 May 2024 11:53:40 PM PDT
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
* tag 'for-upstream' of https://gitlab.com/bonzini/qemu: (26 commits)
target/i386: remove duplicate prefix decoding
target/i386: split legacy decoder into a separate function
target/i386: decode x87 instructions in a separate function
target/i386: remove now-converted opcodes from old decoder
target/i386: port extensions of one-byte opcodes to new decoder
target/i386: move BSWAP to new decoder
target/i386: move remaining conditional operations to new decoder
target/i386: merge and enlarge a few ranges for call to disas_insn_new
target/i386: move C0-FF opcodes to new decoder (except for x87)
target/i386: generalize gen_movl_seg_T0
target/i386: move 60-BF opcodes to new decoder
target/i386: allow instructions with more than one immediate
target/i386: extract gen_far_call/jmp, reordering temporaries
target/i386: move 00-5F opcodes to new decoder
target/i386: reintroduce debugging mechanism
target/i386: cleanup *gen_eob*
target/i386: clarify the "reg" argument of functions returning CCPrepare
target/i386: do not use s->T0 and s->T1 as scratch registers for CCPrepare
target/i386: extend cc_* when using them to compute flags
target/i386: pull cc_op update to callers of gen_jmp_rel{,_csize}
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Now that a bulk of opcodes go through the new decoder, it is sensible
to do some cleanup. Go immediately through disas_insn_new and only jump
back after parsing the prefixes.
disas_insn() now only contains the three sigsetjmp cases, and they
are more easily managed if they are inlined into i386_tr_translate_insn.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Split the bits that have some duplication with disas_insn_new, from
those that should be the main topic of the conversion. This is the
first step towards removing duplicate decoding of prefixes between
disas_insn and disas_insn_new.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
These are unlikely to be converted to the table-based decoding
soon (perhaps there could be generic ESC decoding in decode-new.c.inc
for the Mod/RM byte, but not operand decoding), so keep them separate
from the remaining legacy-decoded instructions.
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Send all converted opcodes to disas_insn_new() directly from the big
decoding switch statement; once more, the debugging/bisecting logic
disappears.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
A few two-byte opcodes are simple extensions of existing one-byte opcodes;
they are easy to decode and need no change to emit.c.inc. Port them to
the new decoder.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move long-displacement Jcc, SETcc and CMOVcc to the new decoder.
While filling in the tables makes the code seem longer, the new
emitters are all just one line of code.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Since new opcodes are not going to be added in translate.c, round the
case labels that call to disas_insn_new(), including whole sets of
eight opcodes when possible.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The shift instructions are rewritten instead of reusing code from the old
decoder. Rotates use CC_OP_ADCOX more extensively and generally rely
more on the optimizer, so that the code generators are shared between
the immediate-count and variable-count cases.
In particular, this makes gen_RCL and gen_RCR pretty efficient for the
count == 1 case, which becomes (apart from a few extra movs) something like:
(compute_cc_all if needed)
// save old value for OF calculation
mov cc_src2, T0
// the bulk of RCL is just this!
deposit T0, cc_src, T0, 1, TARGET_LONG_BITS - 1
// compute carry
shr cc_dst, cc_src2, length - 1
and cc_dst, cc_dst, 1
// compute overflow
xor cc_src2, cc_src2, T0
extract cc_src2, cc_src2, length - 1, 1
32-bit MUL and IMUL are also slightly more efficient on 64-bit hosts.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In the new decoder it is sometimes easier to put the segment
in T1 instead of T0, usually because another operand was loaded
by common code in T0. Genrealize gen_movl_seg_T0 to allow
using any source.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Compared to the old decoder, the main differences in translation
are for the little-used ARPL instruction. IMUL is adjusted a bit
to share more code to produce flags, but is otherwise very similar.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
While keeping decode->immediate for convenience and for 4-operand instructions,
store the immediate in X86DecodedOp as well. This enables instructions
with more than one immediate such as ENTER. It can also be used for far
calls and jumps.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Extract the code into new functions, and swap T0/T1 so that T0 corresponds
to the first immediate in the instruction stream.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Create a new wrapper for syscall/sysret, and do not go through multiple
layers of wrappers.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Instead of using s->T0 or s->T1, create a scratch register
when computing the C, NC, L or LE conditions.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Instead of using s->tmp0 or s->tmp4 as the result, just extend the cc_*
registers in place. It is harmless and, if multiple setcc instructions
are used, the optimizer will be able to remove the redundant ones.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
gen_update_cc_op must be called before control flow splits. Doing it
in gen_jmp_rel{,_csize} may hide bugs, instead assert that cc_op is
clean---even if that means a few more calls to gen_update_cc_op().
With this new invariant, setting cc_op to CC_OP_DYNAMIC is unnecessary
since the caller should have done it.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
gen_update_cc_op must be called before control flow splits. Do it
where the jump on ECX!=0 is translated.
On the other hand, remove the call before gen_jcc1, which takes care of
it already, and explain why REPZ/REPNZ need not use CC_OP_DYNAMIC---the
translation block ends before any control-flow-dependent cc_op could
be observed.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Resetting cc_op to CC_OP_DYNAMIC should be done at control flow junctions,
which is not the case here. This translation block is ending and the
only effect of calling set_cc_op() would be a discard of s->cc_srcT.
This discard is useless (it's a temporary, not a global) and in fact
prevents gen_prepare_cc from returning s->cc_srcT.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
With the introduction of TSTEQ and TSTNE the .mask field is always -1,
so remove all the now-unnecessary code.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The new conditions obviously come in handy when testing individual bits
of EFLAGS, and they make it possible to remove the .mask field of
CCPrepare.
Lowering to shift+and is done by the optimizer if necessary.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When testing the sign bit or equality to zero of a partial register, it
is useful to use a single TSTEQ or TSTNE operation. It can also be used
to test the parity flag, using bit 0 of the population count.
Do not do this for target_ulong-sized values however; the optimizer would
produce a comparison against zero anyway, and it avoids shifts by 64
which are undefined behavior.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Observed the following failure while booting the SEV-SNP guest and the
guest fails to boot with the smp parameters:
"-smp 192,sockets=1,dies=12,cores=8,threads=2".
qemu-system-x86_64: sev_snp_launch_update: SNP_LAUNCH_UPDATE ret=-5 fw_error=22 'Invalid parameter'
qemu-system-x86_64: SEV-SNP: CPUID validation failed for function 0x8000001e, index: 0x0.
provided: eax:0x00000000, ebx: 0x00000100, ecx: 0x00000b00, edx: 0x00000000
expected: eax:0x00000000, ebx: 0x00000100, ecx: 0x00000300, edx: 0x00000000
qemu-system-x86_64: SEV-SNP: failed update CPUID page
Reason for the failure is due to overflowing of bits used for "Node per
processor" in CPUID Fn8000001E_ECX. This field's width is 3 bits wide and
can hold maximum value 0x7. With dies=12 (0xB), it overflows and spills
over into the reserved bits. In the case of SEV-SNP, this causes CPUID
enforcement failure and guest fails to boot.
The PPR documentation for CPUID_Fn8000001E_ECX [Node Identifiers]
=================================================================
Bits Description
31:11 Reserved.
10:8 NodesPerProcessor: Node per processor. Read-only.
ValidValues:
Value Description
0h 1 node per processor.
7h-1h Reserved.
7:0 NodeId: Node ID. Read-only. Reset: Fixed,XXh.
=================================================================
As in the spec, the valid value for "node per processor" is 0 and rest
are reserved.
Looking back at the history of decoding of CPUID_Fn8000001E_ECX, noticed
that there were cases where "node per processor" can be more than 1. It
is valid only for pre-F17h (pre-EPYC) architectures. For EPYC or later
CPUs, the linux kernel does not use this information to build the L3
topology.
Also noted that the CPUID Function 0x8000001E_ECX is available only when
TOPOEXT feature is enabled. This feature is enabled only for EPYC(F17h)
or later processors. So, previous generation of processors do not not
enumerate 0x8000001E_ECX leaf.
There could be some corner cases where the older guests could enable the
TOPOEXT feature by running with -cpu host, in which case legacy guests
might notice the topology change. To address those cases introduced a
new CPU property "legacy-multi-node". It will be true for older machine
types to maintain compatibility. By default, it will be false, so new
decoding will be used going forward.
The documentation is taken from Preliminary Processor Programming
Reference (PPR) for AMD Family 19h Model 11h, Revision B1 Processors 55901
Rev 0.25 - Oct 6, 2022.
Cc: qemu-stable@nongnu.org
Fixes: 31ada106d8 ("Simplify CPUID_8000_001E for AMD")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=206537
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Signed-off-by: Babu Moger <babu.moger@amd.com>
Message-ID: <0ee4b0a8293188a53970a2b0e4f4ef713425055e.1714757834.git.babu.moger@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We have one job to build user binaries and one job for system.
Disable tools and docs in the user job, and disable building
the user binaries in the system job.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The host does not have the correct libraries installed for static pie,
which causes host/guest address space interference for some tests.
There's no real gain from linking statically, so drop it.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Match the extra inserts of INDEX_op_insn_start, fixing
the db->num_insns != 1 assert in translator_loop.
Fixes: dcd092a063 ("accel/tcg: Improve can_do_io management")
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Record the fact that we've found a breakpoint on the page
in which a TranslationBlock is running.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
If we can show that high bits of an input are zero,
then we may optimize away some comparisons.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This may be treated as a 32-bit EQ/NE comparison against 0,
which is in turn treated as a LTU/GEU comparison against 1.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The x86 isa does not have this operation, so we need an expansion.
Use the same algorithm that we use for expanding this vector
operation with integers: perform the shift with a wider type
and then mask the bits that must be zero.
This reduces the instruction count from 5 to 2.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCgA8FiEEzGIauY6CIA2RXMnEW8LFb64PMh8FAmY4wZceHG1hcmsuY2F2
ZS1heWxhbmRAaWxhbmRlLmNvLnVrAAoJEFvCxW+uDzIftQsH+wfIWymTdQMowfM6
Ze/T8KODn+MqU5eg25VPSTojnmr7LFaCj2yK6zWX61RwIqtMc3NaxX0G7ksW12/g
35ACqiEEd5WRDhAtVhj5Wp+WEDoR4AD3LWIaN7a/qjO3qb78l7Bujw3qXzGSq4lQ
hST6dTgMwn5LhJOyz+5dORVUK1UZSBuDxHeKRHgdoFi6yqGQ5bao5TpaDYOnGSbx
8KPrAFfXG1T6xRS8Ih5HXAPE5VJztLFPiVtCTTrETDP/o8EzvOZj5y/nJVZXXC3N
57g+QyJX9EdrRZvobef4LnNnoZyiqG+uQNugglqZqjiiLjl6AzYxI+ed0hU+cZR9
pz76Hr8=
=i2cV
-----END PGP SIGNATURE-----
Merge tag 'qemu-sparc-20240506' of https://github.com/mcayland/qemu into staging
qemu-sparc queue
# -----BEGIN PGP SIGNATURE-----
#
# iQFSBAABCgA8FiEEzGIauY6CIA2RXMnEW8LFb64PMh8FAmY4wZceHG1hcmsuY2F2
# ZS1heWxhbmRAaWxhbmRlLmNvLnVrAAoJEFvCxW+uDzIftQsH+wfIWymTdQMowfM6
# Ze/T8KODn+MqU5eg25VPSTojnmr7LFaCj2yK6zWX61RwIqtMc3NaxX0G7ksW12/g
# 35ACqiEEd5WRDhAtVhj5Wp+WEDoR4AD3LWIaN7a/qjO3qb78l7Bujw3qXzGSq4lQ
# hST6dTgMwn5LhJOyz+5dORVUK1UZSBuDxHeKRHgdoFi6yqGQ5bao5TpaDYOnGSbx
# 8KPrAFfXG1T6xRS8Ih5HXAPE5VJztLFPiVtCTTrETDP/o8EzvOZj5y/nJVZXXC3N
# 57g+QyJX9EdrRZvobef4LnNnoZyiqG+uQNugglqZqjiiLjl6AzYxI+ed0hU+cZR9
# pz76Hr8=
# =i2cV
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 06 May 2024 04:40:07 AM PDT
# gpg: using RSA key CC621AB98E82200D915CC9C45BC2C56FAE0F321F
# gpg: issuer "mark.cave-ayland@ilande.co.uk"
# gpg: Good signature from "Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>" [full]
* tag 'qemu-sparc-20240506' of https://github.com/mcayland/qemu:
target/sparc: Split out do_ms16b
target/sparc: Fix FPMERGE
target/sparc: Fix FMULD8*X16
target/sparc: Fix FMUL8x16A{U,L}
target/sparc: Fix FMUL8x16
target/sparc: Fix FEXPAND
linux-user/sparc: Add more hwcap bits for sparc64
hw/sparc64: set iommu_platform=on for virtio devices attached to the sun4u machine
docs/about: Deprecate the old "UltraSparc" CPU names that contain a "+"
docs/system/target-sparc: Improve the Sparc documentation
target/sparc/cpu: Avoid spaces by default in the CPU names
target/sparc/cpu: Rename the CPU models with a "+" in their names
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
