Commit Graph

68 Commits

Author SHA1 Message Date
Marc-André Lureau bfc6cf31ce vhost-net: save & restore vring enable state
A driver may change the vring enable state at run time but vhost-user
backend may not be present (a contrived example is when the backend is
disconnected and the device is reconfigured after driver rebinding)

Restore the vring state when the vhost-user backend is started, so it
can process the ring.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Tested-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Victor Kaplansky <victork@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-06-17 03:28:03 +03:00
Marc-André Lureau a463215b08 vhost-net: save & restore vhost-user acked features
The initial vhost-user connection sets the features to be negotiated
with the driver. Renegotiation isn't possible without device reset.

To handle reconnection of vhost-user backend, ensure the same set of
features are provided, and reuse already acked features.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Tested-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Victor Kaplansky <victork@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-06-17 03:28:03 +03:00
Dmitry Fleytman eb700029c7 net_pkt: Extend packet abstraction as required by e1000e functionality
This patch extends the TX/RX packet abstractions with features that will
be used by the e1000e device implementation.

Changes are:

  1. Support iovec lists for RX buffers
  2. Deeper RX packets parsing
  3. Loopback option for TX packets
  4. Extended VLAN headers handling
  5. RSS processing for RX packets

Signed-off-by: Dmitry Fleytman <dmitry.fleytman@ravellosystems.com>
Signed-off-by: Leonid Bloch <leonid.bloch@ravellosystems.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-06-02 10:42:28 +08:00
Dmitry Fleytman 66409b7c8b rtl8139: Move more TCP definitions to common header
Signed-off-by: Dmitry Fleytman <dmitry.fleytman@ravellosystems.com>
Signed-off-by: Leonid Bloch <leonid.bloch@ravellosystems.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-06-02 10:42:28 +08:00
Dmitry Fleytman 6d1d4939a6 net: Add macros for MAC address tracing
These macros will be used by future commits introducing
e1000e device emulation and by vmxnet3 tracing code.

Signed-off-by: Dmitry Fleytman <dmitry.fleytman@ravellosystems.com>
Signed-off-by: Leonid Bloch <leonid.bloch@ravellosystems.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-06-02 10:42:27 +08:00
Dmitry Fleytman 0478d1ddae net: Introduce Toeplitz hash calculator
Signed-off-by: Dmitry Fleytman <dmitry.fleytman@ravellosystems.com>
Signed-off-by: Leonid Bloch <leonid.bloch@ravellosystems.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-06-02 10:42:27 +08:00
Zhang Chen 16a3df403b net/net: Add SocketReadState for reuse codes
This function is from net/socket.c, move it to net.c and net.h.
Add SocketReadState to make others reuse net_fill_rstate().
suggestion from jason.

v4:
 - move 'rs->finalize = finalize' to rs_init()

v3:
 - remove SocketReadState init callback
 - put finalize callback to net_fill_rstate()

v2:
 - rename ReadState to SocketReadState
 - add SocketReadState init and finalize callback

v1:
 - init patch

Signed-off-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-06-01 09:25:29 +08:00
Eduardo Habkost d30300f771 net: vl: Move default_net to vl.c
All handling of defaults (default_* variables) is inside vl.c,
move default_net there too, so we can more easily refactor that
code later.

Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-06-01 09:25:29 +08:00
Markus Armbruster 14b6d44d47 Use scripts/clean-includes to drop redundant qemu/typedefs.h
Re-run scripts/clean-includes to apply the previous commit's
corrections and updates.  Besides redundant qemu/typedefs.h, this only
finds a redundant config-host.h include in ui/egl-helpers.c.  No idea
how that escaped the previous runs.

Some manual whitespace trimming around dropped includes squashed in.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-03-22 22:20:16 +01:00
zhanghailiang 338d3f415e filter: Add 'status' property for filter object
With this property, users can control if this filter is 'on'
or 'off'. The default behavior for filter is 'on'.

For some types of filters, they may need to react to status changing,
So here, we introduced status changing callback/notifier for filter class.

We will skip the disabled ('off') filter when delivering packets in net layer.

Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Yang Hongyang <hongyang.yang@easystack.cn>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-03-08 15:34:18 +08:00
Peter Maydell 90ce6e2644 include: Clean up includes
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.

This commit was created with scripts/clean-includes.

NB: If this commit breaks compilation for your out-of-tree
patchseries or fork, then you need to make sure you add
#include "qemu/osdep.h" to any new .c files that you have.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
2016-02-23 12:43:05 +00:00
zhanghailiang aa9156f4b1 net/filter: Fix the output information for command 'info network'
The properties of netfilter object could be changed by 'qom-set'
command, but the output of 'info network' command is not updated,
because it got the old information through nf->info_str, it will
not be updated while we change the value of netfilter's property.

Here we split a helper function that could collect the output
information for filter, and also remove the useless member
'info_str' from struct NetFilterState.

Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Eric Blake <eblake@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Cc: Yang Hongyang <hongyang.yang@easystack.cn>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-02-04 14:13:11 +08:00
Li Zhijian 25aaadf063 net: always walk through filters in reverse if traffic is egress
Previously, if we attach more than one filters for a single netdev,
both ingress and egress traffic will go through net filters in same
order like:

ingress: netdev ->filter1 ->filter2 ->...filter[n] ->emulated device
egress: emulated device ->filter1 ->filter2 ->...filter[n] ->netdev.

This is against the natural feeling and will complicate filters
configuration since in some scenes, we hope filters handle the egress
traffic in a reverse order. For example, in colo-proxy (will be
implemented later), we have a redirector filter and a colo-rewriter
filter, we need the filter behave like:

ingress(->)/egress(<-): chardev<->redirector<->colo-rewriter<->emulated device

Since both buffer filter and dump do not require strict order of
filters, this patch switches to always let egress traffic walk through
net filters in reverse to simplify the possible filters configuration
in the future.

Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Reviewed-by: Yang Hongyang <hongyang.yang@easystack.cn>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-02-04 14:13:11 +08:00
Dr. David Alan Gilbert 9c7ffe2664 ether/slirp: Avoid redefinition of the same constants
eth.h and slirp.h both define ETH_ALEN and ETH_P_IP
rtl8139.c and eth.h both define ETH_HLEN

Move the related constant (ETH_P_ARP) from slirp.h to eth.h, and
remove the duplicates; make slirp.h include eth.h

Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-01-11 11:01:35 +08:00
Thibaut Collet 3e866365e1 vhost user: add rarp sending after live migration for legacy guest
A new vhost user message is added to allow QEMU to ask to vhost user backend to
broadcast a fake RARP after live migration for guest without GUEST_ANNOUNCE
capability.

This new message is sent only if the backend supports the new
VHOST_USER_PROTOCOL_F_RARP protocol feature.
The payload of this new message is the MAC address of the guest (not known by
the backend). The MAC address is copied in the first 6 bytes of a u64 to avoid
to create a new payload message type.

This new message has no equivalent ioctl so a new callback is added in the
userOps structure to send the request.

Upon reception of this new message the vhost user backend must generate and
broadcast a fake RARP request to notify the migration is terminated.

Signed-off-by: Thibaut Collet <thibaut.collet@6wind.com>
[Rebased and fixed checkpatch errors - Marc-André]
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Thibaut Collet <thibaut.collet@6wind.com>
2015-10-22 14:34:49 +03:00
Yang Hongyang b68c7f7692 net/queue: export qemu_net_queue_append_iov
This will be used by buffer filter implementation later to
queue packets.

Signed-off-by: Yang Hongyang <yanghy@cn.fujitsu.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2015-10-12 13:31:18 +08:00
Yang Hongyang a4960f52e7 netfilter: print filter info associate with the netdev
When execute "info network", print filter info also.
add a info_str member to NetFilterState, store specific filters
info.

Signed-off-by: Yang Hongyang <yanghy@cn.fujitsu.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2015-10-12 13:30:56 +08:00
Yang Hongyang 7ef7bc8586 netfilter: add an API to pass the packet to next filter
add an API qemu_netfilter_pass_to_next() to pass the packet
to next filter.

Signed-off-by: Yang Hongyang <yanghy@cn.fujitsu.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2015-10-12 13:30:45 +08:00
Yang Hongyang 3e033a46a7 net/queue: introduce NetQueueDeliverFunc
net/queue.c has logic to send/queue/flush packets but a
qemu_deliver_packet_iov() call is hardcoded. Abstract this
func so that we can use our own deliver function in netfilter.

Signed-off-by: Yang Hongyang <yanghy@cn.fujitsu.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2015-10-12 13:30:07 +08:00
Yang Hongyang fefe2a78ab net: merge qemu_deliver_packet and qemu_deliver_packet_iov
qemu_deliver_packet_iov already have the compat delivery, we
can drop qemu_deliver_packet.

Signed-off-by: Yang Hongyang <yanghy@cn.fujitsu.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2015-10-12 13:30:04 +08:00
Yang Hongyang e64c770d1f netfilter: hook packets before net queue send
Capture packets that will be sent.

Signed-off-by: Yang Hongyang <yanghy@cn.fujitsu.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2015-10-12 13:29:39 +08:00
Yang Hongyang fdccce4596 init/cleanup of netfilter object
Add a netfilter object based on QOM.

A netfilter is attached to a netdev, captures all network packets
that pass through the netdev. When we delete the netdev, we also
delete the netfilter object attached to it, because if the netdev is
removed, the filter which attached to it is useless.

Signed-off-by: Yang Hongyang <yanghy@cn.fujitsu.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2015-10-12 13:23:40 +08:00
Changchun Ouyang 7263a0ad78 vhost-user: add a new message to disable/enable a specific virt queue.
Add a new message, VHOST_USER_SET_VRING_ENABLE, to enable or disable
a specific virt queue, which is similar to attach/detach queue for
tap device.

virtio driver on guest doesn't have to use max virt queue pair, it
could enable any number of virt queue ranging from 1 to max virt
queue pair.

Signed-off-by: Changchun Ouyang <changchun.ouyang@intel.com>
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Jason Wang <jasowang@redhat.com>
Tested-by: Marcel Apfelbaum <marcel@redhat.com>
2015-09-24 16:27:53 +03:00
Yuanhan Liu e2051e9e00 vhost-user: add VHOST_USER_GET_QUEUE_NUM message
This is for querying how many queues the backend supports if it has mq
support(when VHOST_USER_PROTOCOL_F_MQ flag is set from the quried
protocol features).

vhost_net_get_max_queues() is the interface to export that value, and
to tell if the backend supports # of queues user requested, which is
done in the following patch.

Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Tested-by: Marcel Apfelbaum <marcel@redhat.com>
2015-09-24 16:27:52 +03:00
Markus Armbruster 485febc6d1 qmp: Wean off qerror_report()
The traditional QMP command handler interface

    int qmp_FOO(Monitor *mon, const QDict *params, QObject **ret_data);

doesn't provide for returning an Error object.  Instead, the handler
is expected to stash it in the monitor with qerror_report().

When we rebased QMP on top of QAPI, we didn't change this interface.
Instead, commit 776574d introduced "middle mode" as a temporary aid
for converting existing QMP commands to QAPI one by one.  More than
three years later, we're still using it.

Middle mode has two effects:

* Instead of the native input marshallers

      static void qmp_marshal_input_FOO(QDict *, QObject **, Error **)

  it generates input marshallers conforming to the traditional QMP
  command handler interface.

* It suppresses generation of code to register them with
  qmp_register_command()

  This permits giving them internal linkage.

As long as we need qmp-commands.hx, we can't use the registry behind
qmp_register_command(), so the latter has to stay for now.

The former has to go to get rid of qerror_report().  Changing all QMP
commands to fit the QAPI mold in one go was impractical back when we
started, but by now there are just a few stragglers left:
do_qmp_capabilities(), qmp_qom_set(), qmp_qom_get(), qmp_object_add(),
qmp_netdev_add(), do_device_add().

Switch middle mode to generate native input marshallers, and adapt the
stragglers.  Simplifies both the monitor code and the stragglers.

Rename do_qmp_capabilities() to qmp_capabilities(), and
do_device_add() to qmp_device_add, because that's how QMP command
handlers are named today.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
2015-06-22 18:20:40 +02:00
Pankaj Gupta 1e7398a140 vhost: enable vhost without without MSI-X
We use vhostforce to enable vhost even if Guests don't have MSI-X
support and we fall back to QEMU virtio-net.

This gives a very small performance gain, but the disadvantage
is that guest now controls which virtio code is running
(qemu or vhost) so our attack surface is doubled.

This patch will enable vhost unconditionally whenever it's requested.
For compatibility, enable vhost when vhostforce is set, as well.

Signed-off-by: Pankaj Gupta <pagupta@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Jason Wang <jasowang@redhat.com>
2015-06-19 12:17:49 +02:00
Greg Kurz c80cd6bb9c tap: add VNET_LE/VNET_BE operations
The linux tap and macvtap backends can be told to parse vnet headers
according to little or big endian. This is done through the TUNSETVNETLE
and TUNSETVNETBE ioctls.

This patch brings all the plumbing for QEMU to use these APIs.

Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-06-17 17:12:54 +02:00
Cornelia Huck 9a2ba82302 vhost: 64 bit features
Make sure that all vhost interfaces use 64 bit features, as the virtio
core does, and make sure to use ULL everywhere possible to be on the
safe side.

Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
2015-06-10 18:15:04 +02:00
Scott Feldman 890ee6abb3 net: add MAC address string printer
We can use this in virtio-net code as well as new Rocker driver code, so
up-level this.

Signed-off-by: Scott Feldman <sfeldma@gmail.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1426306173-24884-2-git-send-email-sfeldma@gmail.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-05-11 14:49:03 +01:00
Michael S. Tsirkin b93a5ba3d1 virtio-net,tap: use standard-headers
Drop duplicated code.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com>
2015-02-26 13:04:04 +01:00
Markus Armbruster 1ce6be24df hmp: Name HMP info handler functions hmp_info_SUBCOMMAND()
Some are called do_info_SUBCOMMAND() (old ones, usually), some
hmp_info_SUBCOMMAND(), some SUBCOMMAND_info(), sometimes SUBCOMMAND
pointlessly differs in spelling.

Normalize to hmp_info_SUBCOMMAND(), where SUBCOMMAND is exactly the
subcommand name with '-' replaced by '_'.

Exceptions:

* sun4m_irq_info(), sun4m_pic_info() renamed to sun4m_hmp_info_irq(),
  sun4m_hmp_info_pic().

* lm32_irq_info(), lm32_pic_info() renamed to lm32_hmp_info_irq(),
  lm32_hmp_info_pic().

Signed-off-by: Markus Armbruster <armbru@redhat.com>
2015-02-18 11:58:50 +01:00
Markus Armbruster 3e5a50d64c hmp: Name HMP command handler functions hmp_COMMAND()
Some are called do_COMMAND() (old ones, usually), some hmp_COMMAND(),
and sometimes COMMAND pointlessly differs in spelling.

Normalize to hmp_COMMAND(), where COMMAND is exactly the command name
with '-' replaced by '_'.

Exceptions:

* do_device_add() and client_migrate_info() *not* renamed to
  hmp_device_add(), hmp_client_migrate_info(), because they're also
  QMP handlers.  They still need to be converted to QAPI.

* do_memory_dump(), do_physical_memory_dump(), do_ioport_read(),
  do_ioport_write() renamed do hmp_* instead of hmp_x(), hmp_xp(),
  hmp_i(), hmp_o(), because those names are too cryptic for my taste.

* do_info_help() renamed to hmp_info_help() instead of hmp_info(),
  because it only covers help.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
2015-02-18 11:58:30 +01:00
Gonglei 45e8a9e123 net: remove bootindex property from qdev to qom
Remove bootindex form qdev property to qom, things will
continue to work just fine, and we can use qom features
which are not supported by qdev property.

Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-10-15 09:52:54 +02:00
Jiri Pirko 575a1c0e42 net: move queue number into NICPeers
It indicates the number of elements in ncs field and makes sense to have
int inside NICPeers. Also in parse_netdev we do not need to access
container and work with NICPeers only.

Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-06-27 11:19:31 +02:00
Nikolay Nikolaev d314f586b3 Add new vhost-user netdev backend
Add a new QEMU netdev backend that is intended to invoke vhost_net with the
vhost-user backend. It uses an Unix socket chardev to establish a
communication with the 'slave' (client and server mode supported).

At runtime the netdev will handle OPEN/CLOSE events from the chardev. Upon
disconnection it will set link_down accordingly and notify virtio-net; the
virtio-net interface will go down.

Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com>
Signed-off-by: Nikolay Nikolaev <n.nikolaev@virtualopensystems.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-19 16:41:57 +03:00
Nikolay Nikolaev 1a1bfac9ee Add vhost-backend and VhostBackendType
Use vhost_set_backend_type to initialise a proper vhost_ops structure.
In vhost_net_init and vhost_net_start_one call conditionally TAP related
initialisation depending on the vhost backend type.

Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com>
Signed-off-by: Nikolay Nikolaev <n.nikolaev@virtualopensystems.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-19 16:41:56 +03:00
Nikolay Nikolaev 81647a655f vhost_net_init will use VhostNetOptions to get all its arguments
vhost_dev_init will replace devfd and devpath with a single opaque argument.
This is initialised with a file descriptor. When TAP is used (through
vhost_net), open /dev/vhost-net and pass the fd as an opaque parameter in
VhostNetOptions. The same applies to vhost-scsi - open /dev/vhost-scsi and
pass the fd.

Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com>
Signed-off-by: Nikolay Nikolaev <n.nikolaev@virtualopensystems.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-19 16:41:56 +03:00
Nikolay Nikolaev ed8b4afe5f Refactor virtio-net to use generic get_vhost_net
This decouples virtio-net from the TAP netdev backend and allows support
for other backends to be implemented.

Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com>
Signed-off-by: Nikolay Nikolaev <n.nikolaev@virtualopensystems.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-19 16:41:55 +03:00
Hani Benhabiles 84007e8181 net: Export valid host network devices list
Signed-off-by: Hani Benhabiles <hani@linux.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2014-06-11 10:10:29 -04:00
Stefan Hajnoczi d6085e3ace net: remove implicit peer from offload API
The virtio_net offload APIs are used on the NIC's peer (i.e. the tap
device).  The API was defined to implicitly use nc->peer, saving the
caller the trouble.

This wasn't ideal because:
1. There are callers who have the peer but not the NIC.  Currently they
   are forced to bypass the API and access peer->info->... directly.
2. The rest of the net.h API uses nc, not nc->peer, so it is
   inconsistent.

This patch pushes nc->peer back up to callers.

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-02-25 14:31:05 +01:00
Vincenzo Maffione 3bac80d31a net: make tap offloading callbacks static
Since TAP offloadings are manipulated through a new API, it's
not necessary to export them in include/net/tap.h anymore.

Signed-off-by: Vincenzo Maffione <v.maffione@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-02-25 11:50:17 +01:00
Vincenzo Maffione 1f55ac4586 net: extend NetClientInfo for offloading
Some new callbacks have been added to generalize the operations done
by virtio-net and vmxnet3 frontends to manipulate TAP offloadings.

Signed-off-by: Vincenzo Maffione <v.maffione@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-02-25 11:50:17 +01:00
Vincenzo Maffione e96dfd110e net: change vnet-hdr TAP prototypes
The tap_has_vnet_hdr() and tap_has_vnet_hdr_len() functions used
to return int, even though they only return true/false values.
This patch changes the prototypes to return bool.

Signed-off-by: Vincenzo Maffione <v.maffione@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-02-25 11:50:16 +01:00
Michael Tokarev 262471794d net: declare struct iovec in checksum.h to fix compiler warning
The checksum calculation header exports a function that refers to
struct iov defined in iov.h.  Without including the former, build
fails like this:

  In file included from hw/net/fsl_etsec/rings.c:24:0:
  include/net/checksum.h:51:31: error: ‘struct iovec’ declared inside parameter list [-Werror]
  include/net/checksum.h:51:31: error: its scope is only this definition or declaration, which is probably not what you want [-Werror]

Mention struct iovec there.

Reported-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2014-02-15 16:10:25 +04:00
Dmitry Krivenok d60b20cf2a net: disallow to specify multicast MAC address
[Assigning a multicast MAC address to a NIC leads to confusing behavior.
Reject multicast MAC addresses so users are alerted to their error
straight away.

The "net/eth.h" in6_addr rename prevents a name collision with
<netinet/in.h> on Linux.
-- Stefan]

Signed-off-by: Dmitry V. Krivenok <krivenok.dmitry@gmail.com>
Reviewed-by: Amos Kong <kongjianjun@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-11-08 17:32:34 +01:00
Jan Kiszka 067404be62 net: Rename send_queue to incoming_queue
Each networking client has a queue for packets that could not yet be
delivered to that client. Calling this queue "send_queue" is highly
confusing as it has nothing to to with packets send from this client but
to it. Avoid this confusing by renaming it to "incoming_queue".

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-09-06 17:01:26 +02:00
Amos Kong b1be42803b net: add support of mac-programming over macvtap in QEMU side
Currently macvtap based macvlan device is working in promiscuous
mode, we want to implement mac-programming over macvtap through
Libvirt for better performance.

Design:
 QEMU notifies Libvirt when rx-filter config is changed in guest,
 then Libvirt query the rx-filter information by a monitor command,
 and sync the change to macvtap device. Related rx-filter config
 of the nic contains main mac, rx-mode items and vlan table.

This patch adds a QMP event to notify management of rx-filter change,
and adds a monitor command for management to query rx-filter
information.

Test:
 If we repeatedly add/remove vlan, and change macaddr of vlan
 interfaces in guest by a loop script.

Result:
 The events will flood the QMP client(management), management takes
 too much resource to process the events.

 Event_throttle API (set rate to 1 ms) can avoid the events to flood
 QMP client, but it could cause an unexpected delay (~1ms), guests
 guests normally expect rx-filter updates immediately.

 So we use a flag for each nic to avoid events flooding, the event
 is emitted once until the query command is executed. The flag
 implementation could not introduce unexpected delay.

There maybe exist an uncontrollable delay if we let Libvirt do the
real change, guests normally expect rx-filter updates immediately.
But it's another separate issue, we can investigate it when the
work in Libvirt side is done.

Michael S. Tsirkin: tweaked to enable events on start
Michael S. Tsirkin: fixed not to crash when no id
Michael S. Tsirkin: fold in patch:
   "additional fixes for mac-programming feature"
Amos Kong: always notify QMP client if mactable is changed
Amos Kong: return NULL list if no net client supports rx-filter query

Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Amos Kong <akong@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-07-15 21:23:08 +03:00
Paolo Bonzini 0d09e41a51 hw: move headers to include/
Many of these should be cleaned up with proper qdev-/QOM-ification.
Right now there are many catch-all headers in include/hw/ARCH depending
on cpu.h, and this makes it necessary to compile these files per-target.
However, fixing this does not belong in these patches.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-04-08 18:13:10 +02:00
Scott Feldman d32fcad366 net: increase buffer size to accommodate Jumbo frame pkts
Socket buffer sizes were hard-coded to 4K for VDE and socket netdevs.  Bump this
up to 68K (ala tap netdev) to handle maximum GSO packet size (64k) plus plenty
of room for the ethernet and virtio_net headers.

Originally, ran into this limitation when using -netdev UDP sockets to connect
VM-to-VM, where VM interface is configure with MTU=9000.  (Using virtio_net
NIC model).  Test is simple: ping -M do -s 8500 <target>.  This test will
attempt to ping with unfragmented packet of given size.  Without patch, size
is limited to < 4K (minus protocol hdrs).  With patch, ping test works with pkt
size up to 9000 (again, minus protocol hdrs).

v2: per Stefan, increase buf size to (4096+65536) as done in tap and apply
    to vde and socket netdevs.
v1: increase buf size to 12K just for -netdev UDP sockets

Signed-off-by: Scott Feldman <sfeldma@cumulusnetworks.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-03-25 11:14:07 +01:00
Dmitry Fleytman 75020a7021 Common definitions for VMWARE devices
Signed-off-by: Dmitry Fleytman <dmitry@daynix.com>
Signed-off-by: Yan Vugenfirer <yan@daynix.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-03-25 11:13:10 +01:00