For SeaBIOS-hppa, the RTC and DebugOutputPort were in the I/O area of
the LASI chip of the emulated B160L machine.
Since we will add other machines without a LASI chip, move the emulated
devices into the I/O area of CPU#0 instead.
Signed-off-by: Helge Deller <deller@gmx.de>
This fixes the serial ports in the emulation to behave as on original
hardware.
On the real hardware, the LASI UART is serial port #0 and the DINO UART
is serial port #1. This is fixed in SeaBIOS-hppa firmware v6, which is
why at least this firmware version is required.
The serial port addresses in hppa/hppa_hardware.h have to be swapped,
and when creating the virtual serial ports the correct port addresses
are used.
This patch now for example allows to specify on the qemu command line:
-serial mon:stdio -serial /dev/ttyS4
to use the emulated ttyS0 in the guest for console output, and pass
ttyS4 from the host to ttyS1 in the guest.
Signed-off-by: Helge Deller <deller@gmx.de>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
The hppa_hardware.h header file holds many constants for addresses and
offsets which are needed while building the firmware (SeaBIOS-hppa) and
while setting up the virtual machine in QEMU.
That's why this header file needs to be in sync between both source code
repositories. This patch adds a comment mentioning this dependency at
the top of this file and restores some DINO relevant offsets.
Signed-off-by: Helge Deller <deller@gmx.de>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
This is to allow us to decouple the DINO device from the board logic.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Helge Deller <deller@gmx.de>
Message-Id: <20220504092600.10048-22-mark.cave-ayland@ilande.co.uk>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
This brings the hppa_hardware.h file in sync with the copy in the
SeaBIOS-hppa sources.
In order to support up to 16 CPUs, it's required to move the HPA for
MEMORY_HPA out of the address space of the new 16th CPU.
The new address of 0xfffff000 worked well for Linux and HP-UX, while
other addresses close to the former 0xfffbf000 area are used by the
architecture for local and global broadcasts.
The PIM_STORAGE_SIZE constant is used in SeaBIOS sources and
is relevant for the TOC/NMI feature.
Signed-off-by: Helge Deller <deller@gmx.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Change QEMU_FW_CFG_IO_BASE to shorter variant FW_CFG_IO_BASE and hand
over the actual port address in %r19 to SeaBIOS.
Signed-off-by: Helge Deller <deller@gmx.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Devices on hppa occupy at least 4k starting at the HPA, so MEMORY_HPA+4k is
blocked (by Linux) for the memory module. I noticed this when testing the new
Linux kernel patch to let the fw_cfg entries show up in Linux under /proc.
The Linux kernel driver could not allocate the region for fw_cfg.
This new base address seems to not conflict.
Signed-off-by: Helge Deller <deller@gmx.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
The hppa_hardware.h file is shared with SeaBIOS. Sync it.
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Helge Deller <deller@gmx.de>
This adds emulation of Artist graphics good enough to get a text
console on both Linux and HP-UX. The X11 server from HP-UX also works.
Adjust boot-serial-test to disable graphics, so that SeaBIOS outputs
to the serial port, as expected by the test.
Signed-off-by: Sven Schnelle <svens@stackframe.org>
Message-Id: <20191220211512.3289-6-svens@stackframe.org>
[rth: Merge Helge's test for machine->enable_graphics]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This patch fixes two issues in the hppa/parisc emulation:
1. The CPU HPA was wrong in the sense that we had negative module
offsets in the firmware-internal module table (which we ignored up to
now). Get it correct by changing the CPU HPA to 0xfffb0000 which is
greater than the DINO_HPA of 0xfff80000.
This change requires the seabios-firmware update.
2. Sven noticed that the FPU register cr10 is only able to reference up
to 8 FPUs, so let's reduce the maximum amount of SMP CPUs too.
Signed-off-by: Helge Deller <deller@gmx.de>
Message-Id: <20190315164130.GA7800@ls3530>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Now that we have the prerequisites in target/hppa/,
implement the hardware for a PA7100LC.
This also enables build for hppa-softmmu.
Signed-off-by: Helge Deller <deller@gmx.de>
[rth: Since it is all new code, squashed all branch development
withing hw/hppa/ to a single patch.]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
