If the process is compromised there should be no network access. Use an
empty network namespace to sandbox networking.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Use a mount namespace with the shared directory tree mounted at "/" and
no other mounts.
This prevents symlink escape attacks because symlink targets are
resolved only against the shared directory and cannot go outside it.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Peng Tao <tao.peng@linux.alibaba.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Sandboxing will remove /proc from the mount namespace so we can no
longer build string paths into "/proc/self/fd/...".
Keep an O_PATH file descriptor so we can still re-open fds via
/proc/self/fd.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Construct a fake dirent for the root directory's ".." entry. This hides
the parent directory from the FUSE client.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Sergio Lopez <slp@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Sergio Lopez <slp@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Each FUSE operation involves parsing the input buffer. Currently the
code assumes the input buffer is large enough for the expected
arguments. This patch uses fuse_mbuf_iter to check the size.
Most operations are simple to convert. Some are more complicated due to
variable-length inputs or different sizes depending on the protocol
version.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Sergio Lopez <slp@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
There is a small change in behavior: if fuse_write_in->size doesn't
match the input buffer size then the request is failed. Previously
write requests with 1 fuse_buf element would truncate to
fuse_write_in->size.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Sergio Lopez <slp@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Introduce an API for consuming bytes from a buffer with size checks.
All FUSE operations will be converted to use this safe API instead of
void *inarg.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Pass the write iov pointing to guest RAM all the way through rather
than copying the data.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Xiao Yang <yangx.jy@cn.fujitsu.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Let fuse_session_process_buf_int take a fuse_bufvec * instead of a
fuse_buf; and then through to do_write_buf - where in the best
case it can pass that straight through to op.write_buf without copying
(other than skipping a header).
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Several FUSE requests contain single path components. A correct FUSE
client sends well-formed path components but there is currently no input
validation in case something went wrong or the client is malicious.
Refuse ".", "..", and paths containing '/' when we expect a path
component.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
We have two operations that cannot be done race-free on a symlink in
certain cases: utimes and link.
Add racy fallback for these if the race-free method doesn't work. We do
our best to avoid races even in this case:
- get absolute path by reading /proc/self/fd/NN symlink
- lookup parent directory: after this we are safe against renames in
ancestors
- lookup name in parent directory, and verify that we got to the original
inode, if not retry the whole thing
Both utimes(2) and link(2) hold i_lock on the inode across the operation,
so a racing rename/delete by this fuse instance is not possible, only from
other entities changing the filesystem.
If the "norace" option is given, then disable the racy fallbacks.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Reviewed-by: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Do not expose file descriptor numbers to clients. This prevents the
abuse of internal file descriptors (like stdin/stdout).
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Fix from:
Signed-off-by: Xiao Yang <yangx.jy@cn.fujitsu.com>
dgilbert:
Added lseek
Reviewed-by: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Do not expose lo_dirp pointers to clients.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Do not expose lo_inode pointers to clients.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
A layer of indirection is needed because passthrough_ll cannot expose
pointers or file descriptor numbers to untrusted clients. Malicious
clients could send invalid pointers or file descriptors in order to
crash or exploit the file system daemon.
lo_map provides an integer key->value mapping. This will be used for
ino and fh fields in the patches that follow.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
We need to create files in the caller's context. Otherwise after
creating a file, the caller might not be able to do file operations on
that file.
Changed effective uid/gid to caller's uid/gid, create file and then
switch back to uid/gid 0.
Use syscall(setresuid, ...) otherwise glibc does some magic to change EUID
in all threads, which is not what we want.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Add the --print-capabilities option as per vhost-user.rst "Backend
programs conventions". Currently there are no advertised features.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Install a vhost-user.json file describing virtiofsd. This allows
libvirt and other management tools to enumerate vhost-user backend
programs.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
According to vhost-user.rst "Backend program conventions", backend
programs should run in the foregound by default. Follow the
conventions so libvirt and other management tools can control virtiofsd
in a standard way.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Although --socket-path=PATH is useful for manual invocations, management
tools typically create the UNIX domain socket themselves and pass it to
the vhost-user device backend. This way QEMU can be launched
immediately with a valid socket. No waiting for the vhost-user device
backend is required when fd passing is used.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Readv the data straight into the guests buffer.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
With fix by:
Signed-off-by: Eryu Guan <eguan@linux.alibaba.com>
Reviewed-by: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Wire up the building of the virtiofsd in tools.
virtiofsd relies on Linux-specific system calls and seccomp. Anyone
wishing to port it to other host operating systems should do so
carefully and without reducing security.
Only allow building on Linux hosts.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Liam Merwick <liam.merwick@oracle.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Keep track of whether we sent a reply to a request; this is a bit
paranoid but it means:
a) We should always recycle an element even if there was an error
in the request
b) Never try and send two replies on one queue element
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Route fuse out messages back through the same queue elements
that had the command that triggered the request.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Pop queue elements off queues, copy the data from them and
pass that to fuse.
Note: 'out' in a VuVirtqElement is from QEMU
'in' in libfuse is into the daemon
So we read from the out iov's to get a fuse_in_header
When we get a kick we've got to read all the elements until the queue
is empty.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
In the queue thread poll the kick_fd we're passed.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Start a thread for each queue when we get notified it's been started.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
fix by:
Signed-off-by: Jun Piao <piaojun@huawei.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Add the get/set features callbacks.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Processes incoming requests on the vhost-user fd.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Listen on our unix socket for the connection from QEMU, when we get it
initialise vhost-user and dive into our own loop variant (currently
dummy).
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
When run with vhost-user options we conect to the QEMU instead
via a socket. Start this off by creating the socket.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Misono Tomohiro <misono.tomohiro@jp.fujitsu.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
The -o source=PATH option will be used by most command-line invocations.
Let's document it!
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Add options to specify parameters for virtio-fs paths, i.e.
./virtiofsd -o vhost_user_socket=/tmp/vhostqemu
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Misono Tomohiro <misono.tomohiro@jp.fujitsu.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
If caller has not sent file handle in request, then using inode, retrieve
the fd opened using O_PATH and use that to open file again and issue
fsync. This will be needed when dax_flush() calls fsync. At that time
we only have inode information (and not file).
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
1) Use correct CONFIG_FALLOCATE macro to check if fallocate() is supported.(i.e configure
script sets CONFIG_FALLOCATE intead of HAVE_FALLOCATE if fallocate() is supported)
2) Replace HAVE_POSIX_FALLOCATE with CONFIG_POSIX_FALLOCATE.
Signed-off-by: Xiao Yang <yangx.jy@cn.fujitsu.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Merged from two of Xiao Yang's patches
virtiofsd only supports major=7, minor>=31; trim out a lot of
old compatibility code.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
All of the fuse files include config.h and define GNU_SOURCE
where we don't have either under our build - remove them.
Fixup path to the kernel's fuse.h in the QEMUs world.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
QEMU's compiler enables warnings/errors for ignored values
and the (void) trick used in the fuse code isn't enough.
Turn all the return values into a return value on the function.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Xiao Yang <yangx.jy@cn.fujitsu.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Notify reply support is unused by virtiofsd. The code would need to be
updated to validate input buffer sizes. Remove this unused code since
changes to it are untestable.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Classic FUSE file system daemons take a mountpoint argument but
virtiofsd exposes a vhost-user UNIX domain socket instead. The
mountpoint argument is not used by virtiofsd but the user is still
required to pass a dummy argument on the command-line.
Remove the mountpoint argument to clean up the command-line.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
There's a lot of the original fuse code we don't need; trim them down.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
with additional trimming by:
Signed-off-by: Misono Tomohiro <misono.tomohiro@jp.fujitsu.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Xiao Yang <yangx.jy@cn.fujitsu.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
passthrough_ll is one of the examples in the upstream fuse project
and is the main part of our daemon here. It passes through requests
from fuse to the underlying filesystem, using syscalls as directly
as possible.
From libfuse fuse-3.8.0
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Fixed up 'GPL' to 'GPLv2' as per Dan's comments and consistent
with the 'LICENSE' file in libfuse; patch sent to libfuse to fix
it upstream.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
fuse_lowlevel is one of the largest files from the library
and does most of the work. Add it separately to keep the diff
sizes small.
Again this is from upstream fuse-3.8.0
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Add most of the non-main .c files we need from upstream fuse-3.8.0
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Pull in headers fromlibfuse's upstream fuse-3.8.0
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>