To emphasize this function is QMP related, rename it.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221222080005.27616-2-philmd@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add process to handle the configure interrupt, The function's
logic is the same with vq interrupt.Add extra process to check
the configure interrupt
Signed-off-by: Cindy Lu <lulu@redhat.com>
Message-Id: <20221222070451.936503-11-lulu@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add configure interrupt support in virtio-mmio bus.
add function to set configure guest notifier.
Signed-off-by: Cindy Lu <lulu@redhat.com>
Message-Id: <20221222070451.936503-10-lulu@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add functions to support configure interrupt.
The configure interrupt process will start in vhost_dev_start
and stop in vhost_dev_stop.
Also add the functions to support vhost_config_pending and
vhost_config_mask.
Signed-off-by: Cindy Lu <lulu@redhat.com>
Message-Id: <20221222070451.936503-8-lulu@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add the functions to support the configure interrupt in virtio
The function virtio_config_guest_notifier_read will notify the
guest if there is an configure interrupt.
The function virtio_config_set_guest_notifier_fd_handler is
to set the fd hander for the notifier
Signed-off-by: Cindy Lu <lulu@redhat.com>
Message-Id: <20221222070451.936503-7-lulu@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add new call back function in vhost-vdpa, The function
vhost_set_config_call can set the event fd to kernel.
This function will be called in the vhost_dev_start
and vhost_dev_stop
Signed-off-by: Cindy Lu <lulu@redhat.com>
Message-Id: <20221222070451.936503-6-lulu@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
To reuse the interrupt process in configure interrupt
Need to decouple the single vector from the interrupt process.
We add new function kvm_virtio_pci_vector_use_one and _release_one.
These functions are used for the single vector, the whole process will
finish in the loop with vq number.
Signed-off-by: Cindy Lu <lulu@redhat.com>
Message-Id: <20221222070451.936503-4-lulu@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
To reuse the notifier process. We add the virtio_pci_get_notifier
to get the notifier and vector. The INPUT for this function is IDX,
The OUTPUT is the notifier and the vector
Signed-off-by: Cindy Lu <lulu@redhat.com>
Message-Id: <20221222070451.936503-3-lulu@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
To support configure interrupt for vhost-vdpa
Introduce VIRTIO_CONFIG_IRQ_IDX -1 as configure interrupt's queue index,
Then we can reuse the functions guest_notifier_mask and guest_notifier_pending.
Add the check of queue index in these drivers, if the driver does not support
configure interrupt, the function will just return
Signed-off-by: Cindy Lu <lulu@redhat.com>
Message-Id: <20221222070451.936503-2-lulu@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221228130956.80515-1-philmd@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
It should be the variable rdl2 to revert the already-notified listeners.
Fixes: 2044969f0b ("virtio-mem: Implement RamDiscardManager interface")
Signed-off-by: Chenyi Qiang <chenyi.qiang@intel.com>
Message-Id: <20221228090312.17276-1-chenyi.qiang@intel.com>
Cc: qemu-stable@nongnu.org
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
vmem->bitmap indexes the memory region of the virtio-mem backend at a
granularity of block_size. To calculate the index of target section offset,
the block_size should be divided instead of the bitmap_size.
Fixes: 2044969f0b ("virtio-mem: Implement RamDiscardManager interface")
Signed-off-by: Chenyi Qiang <chenyi.qiang@intel.com>
Message-Id: <20221216062231.11181-1-chenyi.qiang@intel.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: David Hildenbrand <david@redhat.com>
The monitor decoders are the only functions using the CONFIG_xxx
definitions declared in the target specific CONFIG_DEVICES header.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221213111707.34921-7-philmd@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <a class="moz-txt-link-rfc2396E" href="mailto:philmd@linaro.org"><philmd@linaro.org></a>
These config helpers use the target-dependent LD/ST API.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221213111707.34921-6-philmd@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
These arrays are only accessed read-only, move them to .rodata.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221213111707.34921-5-philmd@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Jonah Palmer<jonah.palmer@oracle.com>
Signed-off-by: Philippe Mathieu-Daudé <a class="moz-txt-link-rfc2396E" href="mailto:philmd@linaro.org"><philmd@linaro.org></a>
Commit f3034ad71f ("qmp: decode feature & status bits in
virtio-status") did not guard all qmp_virtio_feature_map_t
arrays with the corresponding #ifdef'ry used in
qmp_decode_features(). Fix that and reduce the arrays scope
by declaring them static.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221213111707.34921-4-philmd@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Jonah Palmer<jonah.palmer@oracle.com>
Suggested-by: Richard Henderson <a class="moz-txt-link-rfc2396E" href="mailto:richard.henderson@linaro.org"><richard.henderson@linaro.org></a>
Signed-off-by: Philippe Mathieu-Daudé <a class="moz-txt-link-rfc2396E" href="mailto:philmd@linaro.org"><philmd@linaro.org></a>
Since virtio_ss[] is added to specific_ss[], rename it as
specific_virtio_ss[] to make it clearer.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221213111707.34921-3-philmd@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
virtio.c uses target_words_bigendian() which is declared in
"hw/core/cpu.h". Add the missing header to avoid when refactoring:
hw/virtio/virtio.c:2451:9: error: implicit declaration of function 'target_words_bigendian' is invalid in C99 [-Werror,-Wimplicit-function-declaration]
if (target_words_bigendian()) {
^
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221213111707.34921-2-philmd@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
When vIOMMU is enabled, the vq->used_phys is actually the IOVA not
GPA. So we need to translate it to GPA before the syncing otherwise we
may hit the following crash since IOVA could be out of the scope of
the GPA log size. This could be noted when using virtio-IOMMU with
vhost using 1G memory.
Fixes: c471ad0e9b ("vhost_net: device IOTLB support")
Cc: qemu-stable@nongnu.org
Tested-by: Lei Yang <leiyang@redhat.com>
Reported-by: Yalan Zhang <yalzhang@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20221216033552.77087-1-jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Vhost message VHOST_USER_SET_LOG_BASE is device wide. So only
send it once with the first queue pair.
Signed-off-by: Yajun Wu <yajunw@nvidia.com>
Acked-by: Parav Pandit <parav@nvidia.com>
Message-Id: <20221122051447.248462-1-yajunw@nvidia.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Isolate control virtqueue in its own group, allowing to intercept control
commands but letting dataplane run totally passthrough to the guest.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Message-Id: <20221215113144.322011-13-eperezma@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
The memory listener that thells the device how to convert GPA to qemu's
va is registered against CVQ vhost_vdpa. memory listener translations
are always ASID 0, CVQ ones are ASID 1 if supported.
Let's tell the listener if it needs to register them on iova tree or
not.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20221215113144.322011-12-eperezma@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
So the caller can choose which ASID is destined.
No need to update the batch functions as they will always be called from
memory listener updates at the moment. Memory listener updates will
always update ASID 0, as it's the passthrough ASID.
All vhost devices's ASID are 0 at this moment.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20221215113144.322011-10-eperezma@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
SVQ may run or not in a device depending on runtime conditions (for
example, if the device can move CVQ to its own group or not).
Allocate the SVQ array unconditionally at startup, since its hard to
move this allocation elsewhere.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20221215113144.322011-9-eperezma@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The next patches will start control SVQ if possible. However, we don't
know if that will be possible at qemu boot anymore.
Since the moved checks will be already evaluated at net/ to know if it
is ok to shadow CVQ, move them.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20221215113144.322011-8-eperezma@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Currently iova range is requested once per queue pair in the case of
net. Reduce the number of ioctls asking it once at initialization and
reusing that value for each vhost_vdpa.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Message-Id: <20221215113144.322011-7-eperezma@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasonwang@redhat.com>
Since we don't know if we will use SVQ at qemu initialization, let's
allocate iova_tree only if needed. To do so, accept it at SVQ start, not
at initialization.
This will avoid to create it if the device does not support SVQ.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20221215113144.322011-5-eperezma@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The next patches will start control SVQ if possible. However, we don't
know if that will be possible at qemu boot anymore.
Delay device file descriptors until we know it at device start. This
will avoid to create them if the device does not support SVQ.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20221215113144.322011-4-eperezma@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
By the end of this series CVQ is shadowed as long as the features
support it.
Since we don't know at the beginning of qemu running if this is
supported, move the event notifier handler setting to the start of the
SVQ, instead of the start of qemu run. This will avoid to create them if
the device does not support SVQ.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20221215113144.322011-3-eperezma@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This function used to trust in v->shadow_vqs != NULL to know if it must
start svq or not.
This is not going to be valid anymore, as qemu is going to allocate svq
array unconditionally (but it will only start them conditionally).
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20221215113144.322011-2-eperezma@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The generic vDPA device doesn't support migration currently, so
mark it as unmigratable temporarily.
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Longpeng <longpeng2@huawei.com>
Message-Id: <20221215134944.2809-5-longpeng2@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Supports vdpa-dev-pci, we can use the device as follow:
-device vhost-vdpa-device-pci,vhostdev=/dev/vhost-vdpa-X
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Longpeng <longpeng2@huawei.com>
Message-Id: <20221215134944.2809-4-longpeng2@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Supports vdpa-dev, we can use the deivce directly:
-M microvm -m 512m -smp 2 -kernel ... -initrd ... -device \
vhost-vdpa-device,vhostdev=/dev/vhost-vdpa-x
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Longpeng <longpeng2@huawei.com>
Message-Id: <20221215134944.2809-3-longpeng2@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add helpers to get the "Transitional PCI Device ID" and "class_id"
of the device specified by the "Virtio Device ID".
These helpers will be used to build the generic vDPA device later.
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Longpeng <longpeng2@huawei.com>
Message-Id: <20221215134944.2809-2-longpeng2@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Convert the TYPE_VIRTIO_PCI class to 3-phase reset. This is
necessary so that we can convert the subclass TYPE_VIRTIO_VGA_BASE
also to 3-phase reset.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20221125115240.3005559-2-peter.maydell@linaro.org
-----BEGIN PGP SIGNATURE-----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=JJjG
-----END PGP SIGNATURE-----
Merge tag 'pull-misc-2022-12-14' of https://repo.or.cz/qemu/armbru into staging
Miscellaneous patches for 2022-12-14
# gpg: Signature made Wed 14 Dec 2022 15:23:02 GMT
# gpg: using RSA key 354BC8B3D7EB2A6B68674E5F3870B400EB918653
# gpg: issuer "armbru@redhat.com"
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" [full]
# gpg: aka "Markus Armbruster <armbru@pond.sub.org>" [full]
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653
* tag 'pull-misc-2022-12-14' of https://repo.or.cz/qemu/armbru:
ppc4xx_sdram: Simplify sdram_ddr_size() to return
block/vmdk: Simplify vmdk_co_create() to return directly
cleanup: Tweak and re-run return_directly.cocci
io: Tidy up fat-fingered parameter name
qapi: Use returned bool to check for failure (again)
sockets: Use ERRP_GUARD() where obviously appropriate
qemu-config: Use ERRP_GUARD() where obviously appropriate
qemu-config: Make config_parse_qdict() return bool
monitor: Use ERRP_GUARD() in monitor_init()
monitor: Simplify monitor_fd_param()'s error handling
error: Move ERRP_GUARD() to the beginning of the function
error: Drop a few superfluous ERRP_GUARD()
error: Drop some obviously superfluous error_propagate()
Drop more useless casts from void * to pointer
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The has_FOO for pointer-valued FOO are redundant, except for arrays.
They are also a nuisance to work with. Recent commit "qapi: Start to
elide redundant has_FOO in generated C" provided the means to elide
them step by step. This is the step for qapi/virtio.json.
Said commit explains the transformation in more detail. The invariant
violations mentioned there do not occur here.
Cc: Laurent Vivier <lvivier@redhat.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221104160712.3005652-29-armbru@redhat.com>
The has_FOO for pointer-valued FOO are redundant, except for arrays.
They are also a nuisance to work with. Recent commit "qapi: Start to
elide redundant has_FOO in generated C" provided the means to elide
them step by step. This is the step for qapi/machine*.json.
Said commit explains the transformation in more detail. The invariant
violations mentioned there do not occur here.
Cc: Eduardo Habkost <eduardo@habkost.net>
Cc: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Cc: Philippe Mathieu-Daudé <f4bug@amsat.org>
Cc: Yanan Wang <wangyanan55@huawei.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20221104160712.3005652-16-armbru@redhat.com>
Tweak the semantic patch to drop redundant parenthesis around the
return expression.
Coccinelle drops a comment in hw/rdma/vmw/pvrdma_cmd.c; restored
manually.
Coccinelle messes up vmdk_co_create(), not sure why. Change dropped,
will be done manually in the next commit.
Line breaks in target/avr/cpu.h and hw/rdma/vmw/pvrdma_cmd.c tidied up
manually.
Whitespace in tools/virtiofsd/fuse_lowlevel.c tidied up manually.
checkpatch.pl complains "return of an errno should typically be -ve"
two times for hw/9pfs/9p-synth.c. Preexisting, the patch merely makes
it visible to checkpatch.pl.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20221122134917.1217307-2-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Commit 012d4c96e2 changed the visitor functions taking Error ** to
return bool instead of void, and the commits following it used the new
return value to simplify error checking. Since then a few more uses
in need of the same treatment crept in. Do that. All pretty
mechanical except for
* balloon_stats_get_all()
This is basically the same transformation commit 012d4c96e2 applied
to the virtual walk example in include/qapi/visitor.h.
* set_max_queue_size()
Additionally replace "goto end of function" by return.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20221121085054.683122-10-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
include/qapi/error.h advises to put ERRP_GUARD() right at the
beginning of the function, because only then can it guard the whole
function. Clean up the few spots disregarding the advice.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20221121085054.683122-4-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
..and use for both virtio-user-blk and virtio-user-gpio. This avoids
the circular close by deferring shutdown due to disconnection until a
later point. virtio-user-blk already had this mechanism in place so
generalise it as a vhost-user helper function and use for both blk and
gpio devices.
While we are at it we also fix up vhost-user-gpio to re-establish the
event handler after close down so we can reconnect later.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
Message-Id: <20221130112439.2527228-5-alex.bennee@linaro.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
As per the fix to vhost-user-blk in f5b22d06fb (vhost: recheck dev
state in the vhost_migration_log routine) we really should track the
connection and starting separately.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20221130112439.2527228-4-alex.bennee@linaro.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Commit 02b61f38d3 ("hw/virtio: incorporate backend features in features")
properly negotiates VHOST_USER_F_PROTOCOL_FEATURES with the vhost-user
backend, but we forgot to enable vrings as specified in
docs/interop/vhost-user.rst:
If ``VHOST_USER_F_PROTOCOL_FEATURES`` has not been negotiated, the
ring starts directly in the enabled state.
If ``VHOST_USER_F_PROTOCOL_FEATURES`` has been negotiated, the ring is
initialized in a disabled state and is enabled by
``VHOST_USER_SET_VRING_ENABLE`` with parameter 1.
Some vhost-user front-ends already did this by calling
vhost_ops.vhost_set_vring_enable() directly:
- backends/cryptodev-vhost.c
- hw/net/virtio-net.c
- hw/virtio/vhost-user-gpio.c
But most didn't do that, so we would leave the vrings disabled and some
backends would not work. We observed this issue with the rust version of
virtiofsd [1], which uses the event loop [2] provided by the
vhost-user-backend crate where requests are not processed if vring is
not enabled.
Let's fix this issue by enabling the vrings in vhost_dev_start() for
vhost-user front-ends that don't already do this directly. Same thing
also in vhost_dev_stop() where we disable vrings.
[1] https://gitlab.com/virtio-fs/virtiofsd
[2] https://github.com/rust-vmm/vhost/blob/240fc2966/crates/vhost-user-backend/src/event_loop.rs#L217
Fixes: 02b61f38d3 ("hw/virtio: incorporate backend features in features")
Reported-by: German Maglione <gmaglione@redhat.com>
Tested-by: German Maglione <gmaglione@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Acked-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
Message-Id: <20221123131630.52020-1-sgarzare@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20221130112439.2527228-3-alex.bennee@linaro.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Virtio 1.0 is pretty clear that features have to be
negotiated before enabling VQs. Unfortunately Seabios
ignored this ever since gaining 1.0 support (UEFI is ok).
Comment the error out for now, and add a TODO.
Fixes: 3c37f8b8d1 ("virtio: introduce virtio_queue_enable()")
Cc: "Kangjie Xu" <kangjie.xu@linux.alibaba.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20221121200339.362452-1-mst@redhat.com>
Commit 69e1c14aa2 ("virtio: core: vq reset feature negotation support")
enabled VIRTIO_F_RING_RESET by default for all virtio devices.
This feature is not currently emulated by QEMU, so for vhost and
vhost-user devices we need to make sure it is supported by the offloaded
device emulation (in-kernel or in another process).
To do this we need to add VIRTIO_F_RING_RESET to the features bitmap
passed to vhost_get_features(). This way it will be masked if the device
does not support it.
This issue was initially discovered with vhost-vsock and vhost-user-vsock,
and then also tested with vhost-user-rng which confirmed the same issue.
They fail when sending features through VHOST_SET_FEATURES ioctl or
VHOST_USER_SET_FEATURES message, since VIRTIO_F_RING_RESET is negotiated
by the guest (Linux >= v6.0), but not supported by the device.
Fixes: 69e1c14aa2 ("virtio: core: vq reset feature negotation support")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1318
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <20221121101101.29400-1-sgarzare@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
Acked-by: Jason Wang <jasowang@redhat.com>
The previous fix to virtio_device_started revealed a problem in its
use by both the core and the device code. The core code should be able
to handle the device "starting" while the VM isn't running to handle
the restoration of migration state. To solve this duel use introduce a
new helper for use by the vhost-user backends who all use it to feed a
should_start variable.
We can also pick up a change vhost_user_blk_set_status while we are at
it which follows the same pattern.
Fixes: 9f6bcfd99f (hw/virtio: move vm_running check to virtio_device_started)
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Message-Id: <20221107121407.1010913-1-alex.bennee@linaro.org>
The motivation of adding vhost-user vhost_dev_start support is to
improve backend configuration speed and reduce live migration VM
downtime.
Today VQ configuration is issued one by one. For virtio net with
multi-queue support, backend needs to update RSS (Receive side
scaling) on every rx queue enable. Updating RSS is time-consuming
(typical time like 7ms).
Implement already defined vhost status and message in the vhost
specification [1].
(a) VHOST_USER_PROTOCOL_F_STATUS
(b) VHOST_USER_SET_STATUS
(c) VHOST_USER_GET_STATUS
Send message VHOST_USER_SET_STATUS with VIRTIO_CONFIG_S_DRIVER_OK for
device start and reset(0) for device stop.
On reception of the DRIVER_OK message, backend can apply the needed setting
only once (instead of incremental) and also utilize parallelism on enabling
queues.
This improves QEMU's live migration downtime with vhost user backend
implementation by great margin, specially for the large number of VQs of 64
from 800 msec to 250 msec.
[1] https://qemu-project.gitlab.io/qemu/interop/vhost-user.html
Signed-off-by: Yajun Wu <yajunw@nvidia.com>
Acked-by: Parav Pandit <parav@nvidia.com>
Message-Id: <20221017064452.1226514-3-yajunw@nvidia.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
There were several different ways to deal with the situation where the
vector specified for a msix function is out of bound:
- early return a function and keep progresssing
- propagate the error to the caller
- mark msix unusable
- assert it is in bound
- just ignore
An out-of-bound vector should not be specified if the device
implementation is correct so let msix functions always assert that the
specified vector is in range.
An exceptional case is virtio-pci, which allows the guest to configure
vectors. For virtio-pci, it is more appropriate to introduce its own
checks because it is sometimes too late to check the vector range in
msix functions.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20220829083524.143640-1-akihiko.odaki@daynix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Yuval Shaia <yuval.shaia.ml@gmail.com>
Signed-off-by: Akihiko Odaki <<a href="mailto:akihiko.odaki@daynix.com" target="_blank">akihiko.odaki@daynix.com</a>><br>
vhost backend sends host notification for every VQ. If backend creates
VQs in parallel, the VHOST_USER_SLAVE_VRING_HOST_NOTIFIER_MSG may
arrive to QEMU in different order than incremental queue index order.
For example VQ 1's message arrive earlier than VQ 0's:
After alloc VhostUserHostNotifier for VQ 1. GPtrArray becomes
[ nil, VQ1 pointer ]
After alloc VhostUserHostNotifier for VQ 0. GPtrArray becomes
[ VQ0 pointer, nil, VQ1 pointer ]
This is wrong. fetch_notifier will return NULL for VQ 1 in
vhost_user_get_vring_base, causes host notifier miss removal(leak).
The fix is to remove current element from GPtrArray, make the right
position for element to insert.
Fixes: 503e355465 ("virtio/vhost-user: dynamically assign VhostUserHostNotifiers")
Signed-off-by: Yajun Wu <yajunw@nvidia.com>
Acked-by: Parav Pandit <parav@nvidia.com>
Message-Id: <20221018023651.1359420-1-yajunw@nvidia.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Most other virtio-pci devices allow MSI-X, let's have it for rng too.
Signed-off-by: David Daney <david.daney@fungible.com>
Reviewed-by: Marcin Nowakowski <marcin.nowakowski@fungible.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@fungible.com>
Message-Id: <20221014160947.66105-1-philmd@fungible.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Expose vhost_virtqueue_stop(), we need to use it when resetting a
virtqueue.
Signed-off-by: Kangjie Xu <kangjie.xu@linux.alibaba.com>
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20221017092558.111082-9-xuanzhuo@linux.alibaba.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Expose vhost_virtqueue_start(), we need to use it when restarting a
virtqueue.
Signed-off-by: Kangjie Xu <kangjie.xu@linux.alibaba.com>
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20221017092558.111082-8-xuanzhuo@linux.alibaba.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
PCI devices support device specific vq enable.
Based on this function, the driver can re-enable the virtqueue after the
virtqueue is reset.
Signed-off-by: Kangjie Xu <kangjie.xu@linux.alibaba.com>
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20221017092558.111082-7-xuanzhuo@linux.alibaba.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
PCI devices support vq reset.
Based on this function, the driver can adjust the size of the ring, and
quickly recycle the buffer in the ring.
The migration of the virtio devices will not happen during a reset
operation. This is becuase the global iothread lock is held. Migration
thread also needs the lock. As a result, when migration of virtio
devices starts, the 'reset' status of VirtIOPCIQueue will always be 0.
Thus, we do not need to add it in vmstate_virtio_pci_modern_queue_state.
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Signed-off-by: Kangjie Xu <kangjie.xu@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20221017092558.111082-6-xuanzhuo@linux.alibaba.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Introduce the interface queue_enable() in VirtioDeviceClass and the
fucntion virtio_queue_enable() in virtio, it can be called when
VIRTIO_PCI_COMMON_Q_ENABLE is written and related virtqueue can be
started. It only supports the devices of virtio 1 or later. The
not-supported devices can only start the virtqueue when DRIVER_OK.
Signed-off-by: Kangjie Xu <kangjie.xu@linux.alibaba.com>
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20221017092558.111082-4-xuanzhuo@linux.alibaba.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Introduce a new interface function virtio_queue_reset() to implement
reset for vq.
Add a new callback to VirtioDeviceClass for queue reset operation for
each child device.
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20221017092558.111082-3-xuanzhuo@linux.alibaba.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Separate the logic of vq reset. This logic will be called directly
later.
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20221017092558.111082-2-xuanzhuo@linux.alibaba.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
In theory the virtio-iommu-pci could be plugged anywhere in the PCIe
topology and as long as the dt/acpi info are properly built this should
work. However at the moment we fail to do that because the
virtio-iommu-pci BDF is not computed at plug time and in that case
vms->virtio_iommu_bdf gets an incorrect value.
For instance if the virtio-iommu-pci is plugged onto a pcie root port
and the virtio-iommu protects a virtio-block-pci device the guest does
not boot.
So let's do not pretend we do support this case and fail the initialize()
if we detect the virtio-iommu-pci is plugged anywhere else than on the
root bus. Anyway this ability is not needed.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Message-Id: <20221012163448.121368-1-eric.auger@redhat.com>
Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Tested-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
virtio-crypto: Modify the current interface of virtio-crypto
device to support asynchronous mode.
Signed-off-by: lei he <helei.sig11@bytedance.com>
Message-Id: <20221008085030.70212-2-helei.sig11@bytedance.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Enabling all the code path created before.
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
So SVQ code knows if an event is needed.
The code is not reachable at the moment.
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Actually use the new field of the used ring and tell the device if SVQ
wants to be notified.
The code is not reachable at the moment.
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
There was not enough room to accomodate them.
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
... and implement it under POSIX. When a ThreadContext is provided,
create new threads via the context such that these new threads obtain a
properly configured CPU affinity.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Message-Id: <20221014134720.168738-6-david@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Let's
* give the function a "qemu_*" style name
* make sure the parameters in the implementation match the prototype
* rename smp_cpus to max_threads, which makes the semantics of that
parameter clearer
... and add a function documentation.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Message-Id: <20221014134720.168738-2-david@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
While being at it add a #define for the magic 0x1040 number.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Message-Id: <20221004112100.301935-6-kraxel@redhat.com>
Not needed for a virtio 1.0 device. virtio_pci_device_plugged()
overrides them anyway (so no functional change).
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-Id: <20221004112100.301935-3-kraxel@redhat.com>
Not needed for a virtio 1.0 device. virtio_pci_device_plugged()
overrides them anyway (so no functional change).
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Message-Id: <20221004112100.301935-2-kraxel@redhat.com>
This new command shows the information of a VirtQueue element.
[Note: Up until v10 of this patch series, virtio.json had many (15+)
enums defined (e.g. decoded device features, statuses, etc.). In v10
most of these enums were removed and replaced with string literals.
By doing this we get (1) simpler schema, (2) smaller generated code,
and (3) less maintenance burden for when new things are added (e.g.
devices, device features, etc.).]
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Jonah Palmer <jonah.palmer@oracle.com>
Message-Id: <1660220684-24909-6-git-send-email-jonah.palmer@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
These new commands show the internal status of a VirtIODevice's
VirtQueue and a vhost device's vhost_virtqueue (if active).
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Jonah Palmer <jonah.palmer@oracle.com>
Message-Id: <1660220684-24909-5-git-send-email-jonah.palmer@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Display feature names instead of bitmaps for host, guest, and
backend for VirtIODevices.
Display status names instead of bitmaps for VirtIODevices.
Display feature names instead of bitmaps for backend, protocol,
acked, and features (hdev->features) for vhost devices.
Decode features according to device ID. Decode statuses
according to configuration status bitmap (config_status_map).
Decode vhost user protocol features according to vhost user
protocol bitmap (vhost_user_protocol_map).
Transport features are on the first line. Undecoded bits (if
any) are stored in a separate field.
[Jonah: Several changes made to this patch from prev. version (v14):
- Moved all device features mappings to hw/virtio/virtio.c
- Renamed device features mappings (less generic)
- Generalized @FEATURE_ENTRY macro for all device mappings
- Virtio device feature map definitions include descriptions of
feature bits
- Moved @VHOST_USER_F_PROTOCOL_FEATURES feature bit from transport
feature map to vhost-user-supported device feature mappings
(blk, fs, i2c, rng, net, gpu, input, scsi, vsock)
- New feature bit added for virtio-vsock: @VIRTIO_VSOCK_F_SEQPACKET
- New feature bit added for virtio-iommu: @VIRTIO_IOMMU_F_BYPASS_CONFIG
- New feature bit added for virtio-mem: @VIRTIO_MEM_F_UNPLUGGED_INACCESSIBLE
- New virtio transport feature bit added: @VIRTIO_F_IN_ORDER
- Added device feature map definition for virtio-rng
]
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Jonah Palmer <jonah.palmer@oracle.com>
Message-Id: <1660220684-24909-4-git-send-email-jonah.palmer@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This new command shows the status of a VirtIODevice, including
its corresponding vhost device's status (if active).
Next patch will improve output by decoding feature bits, including
vhost device's feature bits (backend, protocol, acked, and features).
Also will decode status bits of a VirtIODevice.
[Jonah: From patch v12; added a check to @virtio_device_find to ensure
synchronicity between @virtio_list and the devices in the QOM
composition tree.]
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Jonah Palmer <jonah.palmer@oracle.com>
Message-Id: <1660220684-24909-3-git-send-email-jonah.palmer@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This new command lists all the instances of VirtIODevices with
their canonical QOM path and name.
[Jonah: @virtio_list duplicates information that already exists in
the QOM composition tree. However, extracting necessary information
from this tree seems to be a bit convoluted.
Instead, we still create our own list of realized virtio devices
but use @qmp_qom_get with the device's canonical QOM path to confirm
that the device exists and is realized. If the device exists but
is actually not realized, then we remove it from our list (for
synchronicity to the QOM composition tree).
Also, the QMP command @x-query-virtio is redundant as @qom-list
and @qom-get are sufficient to search '/machine/' for realized
virtio devices. However, @x-query-virtio is much more convenient
in listing realized virtio devices.]
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Jonah Palmer <jonah.palmer@oracle.com>
Message-Id: <1660220684-24909-2-git-send-email-jonah.palmer@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This is the first step towards moving all device config size calculation
logic into the virtio core code. In particular, this adds a struct that
contains all the necessary information for common virtio code to be able
to calculate the final config size for a device. This is expected to be
used with the new virtio_get_config_size helper, which calculates the
final length based on the provided host features.
This builds on top of already existing code like VirtIOFeature and
virtio_feature_get_config_size(), but adds additional fields, as well as
sanity checking so that device-specifc code doesn't have to duplicate it.
An example usage would be:
static const VirtIOFeature dev_features[] = {
{.flags = 1ULL << FEATURE_1_BIT,
.end = endof(struct virtio_dev_config, feature_1)},
{.flags = 1ULL << FEATURE_2_BIT,
.end = endof(struct virtio_dev_config, feature_2)},
{}
};
static const VirtIOConfigSizeParams dev_cfg_size_params = {
.min_size = DEV_BASE_CONFIG_SIZE,
.max_size = sizeof(struct virtio_dev_config),
.feature_sizes = dev_features
};
// code inside my_dev_device_realize()
size_t config_size = virtio_get_config_size(&dev_cfg_size_params,
host_features);
virtio_init(vdev, VIRTIO_ID_MYDEV, config_size);
Currently every device is expected to write its own boilerplate from the
example above in device_realize(), however, the next step of this
transition is moving VirtIOConfigSizeParams into VirtioDeviceClass,
so that it can be done automatically by the virtio initialization code.
All of the users of virtio_feature_get_config_size have been converted
to use virtio_get_config_size so it's no longer needed and is removed
with this commit.
Signed-off-by: Daniil Tatianin <d-tatianin@yandex-team.ru>
Message-Id: <20220906073111.353245-2-d-tatianin@yandex-team.ru>
Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This allows is to instantiate a vhost-user-gpio device as part of a PCI
bus. It is mostly boilerplate which looks pretty similar to the
vhost-user-fs-pci device.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <5f560cab92d0d789b1c94295ec74b9952907d69d.1641987128.git.viresh.kumar@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220802095010.3330793-14-alex.bennee@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This creates the QEMU side of the vhost-user-gpio device which connects
to the remote daemon. It is based of vhost-user-i2c code.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <5390324a748194a21bc99b1538e19761a8c64092.1641987128.git.viresh.kumar@linaro.org>
[AJB: fixes for qtest, tweaks to feature bits]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Cc: Vincent Whitchurch <vincent.whitchurch@axis.com>
Message-Id: <20220802095010.3330793-13-alex.bennee@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The `started` field is manipulated internally within the vhost code
except for one place, vhost-user-blk via f5b22d06fb (vhost: recheck
dev state in the vhost_migration_log routine). Mark that as a FIXME
because it introduces a potential race. I think the referenced fix
should be tracking its state locally.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220802095010.3330793-12-alex.bennee@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Raphael Norwitz <raphael.norwittz@nutanix.com>
All the boilerplate virtio code does the same thing (or should at
least) of checking to see if the VM is running before attempting to
start VirtIO. Push the logic up to the common function to avoid
getting a copy and paste wrong.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220802095010.3330793-11-alex.bennee@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
These are useful for tracing the lifetime of vhost-user connections.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220802095010.3330793-10-alex.bennee@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
If the guest driver attempts to use the UNUSED(30) bit it is
potentially buggy as 6.3 Legacy Interface: Reserved Feature Bits
states it "SHOULD NOT be negotiated". For now just log this guest
error.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20220802095010.3330793-9-alex.bennee@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20220802095010.3330793-8-alex.bennee@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
There are some extra bits used over a vhost-user connection which are
hidden from the device itself. We need to set them here to ensure we
enable things like the protocol extensions.
Currently net/vhost-user.c has it's own inscrutable way of persisting
this data but it really should live in the core vhost_user code.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220726192150.2435175-7-alex.bennee@linaro.org>
Message-Id: <20220802095010.3330793-2-alex.bennee@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
g_new(T, n) is neater than g_malloc(sizeof(T) * n). It's also safer,
for two reasons. One, it catches multiplication overflowing size_t.
Two, it returns T * rather than void *, which lets the compiler catch
more type errors.
This commit only touches allocations with size arguments of the form
sizeof(T).
Patch created mechanically with:
$ spatch --in-place --sp-file scripts/coccinelle/use-g_new-etc.cocci \
--macro-file scripts/cocci-macro-file.h FILES...
The previous iteration was commit a95942b50c.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20220923084254.4173111-1-armbru@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
GCC issues a false positive warning, resulting in build failure with -Werror:
In file included from /usr/include/glib-2.0/glib.h:114,
from src/include/glib-compat.h:32,
from src/include/qemu/osdep.h:144,
from ../src/hw/virtio/vhost-shadow-virtqueue.c:10:
In function ‘g_autoptr_cleanup_generic_gfree’,
inlined from ‘vhost_handle_guest_kick’ at ../src/hw/virtio/vhost-shadow-virtqueue.c:292:42:
/usr/include/glib-2.0/glib/glib-autocleanups.h:28:3: error: ‘elem’ may be used uninitialized [-Werror=maybe-uninitialized]
28 | g_free (*pp);
| ^~~~~~~~~~~~
../src/hw/virtio/vhost-shadow-virtqueue.c: In function ‘vhost_handle_guest_kick’:
../src/hw/virtio/vhost-shadow-virtqueue.c:292:42: note: ‘elem’ was declared here
292 | g_autofree VirtQueueElement *elem;
| ^~~~
cc1: all warnings being treated as errors
There is actually no problem since "elem" is initialized in both branches.
Silence the warning by initializig it with "NULL".
$ gcc --version
gcc (GCC) 12.2.0
Fixes: 9c2ab2f1ec ("vhost: stop transfer elem ownership in vhost_handle_guest_kick")
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220910151117.6665-1-shentey@gmail.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
As the close-on-exec flags is not set on the file descriptors returned
by socketpair() at default, the fds will survive across exec' function.
In the case that exec' function get invoked, such as the live-update feature
which is been developing, it will cause fd leaks.
To address this problem, we should call qemu_socketpair() to create an pair of
connected sockets with the close-on-exec flag set.
Signed-off-by: Guoyi Tu <tugy@chinatelecom.cn>
Reviewed-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <7002b12a5fb0a30cd878e14e07da61c36da72913.1661240709.git.tugy@chinatelecom.cn>
We can restore the device state in the destination via CVQ now. Remove
the migration blocker.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Since QEMU will be able to inject new elements on CVQ to restore the
state, we need not to depend on a VirtQueueElement to know if a new
element has been used by the device or not. Instead of check that, check
if there are new elements only using used idx on vhost_svq_flush.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
As discussed in previous series [1], this memory barrier is useless with
the atomic read of used idx at vhost_svq_more_used. Deleting it.
[1] https://lists.nongnu.org/archive/html/qemu-devel/2022-07/msg02616.html
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Since we're going to allow SVQ to add elements without the guest's
knowledge and without its own VirtQueueElement, it's easier to check if
an element is a valid head checking a different thing than the
VirtQueueElement.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
It was easier to allow vhost_svq_add to handle the memory. Now that we
will allow qemu to add elements to a SVQ without the guest's knowledge,
it's better to handle it in the caller.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Reduce code duplication.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
We can unbind twice a file descriptor if we call twice
vhost_svq_set_svq_kick_fd because of this. Since it comes from vhost and
not from SVQ, that file descriptor could be a different thing that
guest's vhost notifier.
Likewise, it can happens the same if a guest start and stop the device
multiple times.
Reported-by: Lei Yang <leiyang@redhat.com>
Fixes: dff4426fa6 ("vhost: Add Shadow VirtQueue kick forwarding capabilities")
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Nothing actually reads the return value, but an error in cleaning some
entries could cause device stop to abort, making a restart impossible.
Better ignore explicitely the return value.
Reported-by: Lei Yang <leiyang@redhat.com>
Fixes: 34e3c94eda ("vdpa: Add custom IOTLB translations to SVQ")
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
