d1f6af6 "kvm-irqchip: simplify kvm_irqchip_add_msi_route" was a cleanup
of kvmchip routing configuration, that was mostly intended for x86.
However, it also contains a subtle change in behaviour which breaks EEH[1]
error recovery on certain VFIO passthrough devices on spapr guests. So far
it's only been seen on a BCM5719 NIC on a POWER8 server, but there may be
other hardware with the same problem. It's also possible there could be
circumstances where it causes a bug on x86 as well, though I don't know of
any obvious candidates.
Prior to d1f6af6, both vfio_msix_vector_do_use() and
vfio_add_kvm_msi_virq() used msg == NULL as a special flag to mark this
as the "dummy" vector used to make the host hardware state sync with the
guest expected hardware state in terms of MSI configuration.
Specifically that flag caused vfio_add_kvm_msi_virq() to become a no-op,
meaning the dummy irq would always be delivered via qemu. d1f6af6 changed
vfio_add_kvm_msi_virq() so it takes a vector number instead of the msg
parameter, and determines the correct message itself. The test for !msg
was removed, and not replaced with anything there or in the caller.
With an spapr guest which has a VFIO device, if an EEH error occurs on the
host hardware, then the device will be isolated then reset. This is a
combination of host and guest action, mediated by some EEH related
hypercalls. I haven't fully traced the mechanics, but somehow installing
the kvm irqchip route for the dummy irq on the BCM5719 means that after EEH
reset and recovery, at least some irqs are no longer delivered to the
guest.
In particular, the guest never gets the link up event, and so the NIC is
effectively dead.
[1] EEH (Enhanced Error Handling) is an IBM POWER server specific PCI-*
error reporting and recovery mechanism. The concept is somewhat
similar to PCI-E AER, but the details are different.
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1373802
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Gavin Shan <gwshan@au1.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Cc: qemu-stable@nongnu.org
Fixes: d1f6af6a17 ("kvm-irqchip: simplify kvm_irqchip_add_msi_route")
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Currently, devices are plugged before features are negotiated.
If the backend doesn't support VIRTIO_F_VERSION_1, the transport
needs to rewind some settings.
This is the case for CCW, for which a post_plugged callback had
been introduced, where max_rev field is just updated if
VIRTIO_F_VERSION_1 is not supported by the backend.
For PCI, implementing post_plugged would be much more
complicated, so it needs to know whether the backend supports
VIRTIO_F_VERSION_1 at plug time.
Currently, nothing is done for PCI. Modern capabilities get
exposed to the guest even if VIRTIO_F_VERSION_1 is not supported
by the backend, which confuses the guest.
This patch replaces existing post_plugged solution with an
approach that fits with both transports.
Features negotiation is performed before ->device_plugged() call.
A pre_plugged callback is introduced so that the transports can
set their supported features.
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: qemu-stable@nongnu.org
Tested-by: Cornelia Huck <cornelia.huck@de.ibm.com> [ccw]
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
VMState added by this patch preserves correct
loading of the PC speaker device state.
Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Message-Id: <20160915090133.6440.65457.stgit@PASHA-ISP>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch fixes kvmvapic state change handler.
It clears vmsentry field to allow recreating it
at further vmstate loads.
Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Message-Id: <20160915090127.6440.48793.stgit@PASHA-ISP>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Introduce a new APIC macro to replace APIC_COMMON macro in
hw/intc/apic.c in order to capture access LAPIC in qemu
even if LAPIC is emulated in kvm.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com>
Message-Id: <1473923759-13912-1-git-send-email-wanpeng.li@hotmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
All the other devices` .realize function name are xxx_realize, except this one.
cc: Michael S. Tsirkin <mst@redhat.com>
cc: Marcel Apfelbaum <marcel@redhat.com>
cc: Paolo Bonzini <pbonzini@redhat.com>
cc: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Md Haris Iqbal <haris.phnx@gmail.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
On Tue, Jun 14, 2016 at 04:44:57PM +0100, Daniel P. Berrange wrote:
> The g_test_trap_subprocess() method does not work on the
> Mingw32 platform, causing the test-qdev-global-props
> test case to abort
>
> (test-logging.exe:230): GLib-ERROR **: g_test_trap_subprocess()
> failed: Failed to execute helper program (No such file or directory)
>
> This failure was introduced a while ago in
>
> commit 2177801a48
> Author: Eduardo Habkost <ehabkost@redhat.com>
> Date: Fri Aug 8 16:03:27 2014 -0300
>
> test-qdev-global-props: Run tests on subprocess
>
> Modify the configure time check to avoid enabling this feature
> on Mingw, rather than trying to rewrite the test to avoid this
> feature.
I would do the following instead, just in case we have extra code
looking at $glib_subprocess one day.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
This patch is the result of coccinelle script
scripts/coccinelle/typecast.cocci
CC: Hitoshi Mitake <mitake.hitoshi@lab.ntt.co.jp>
CC: qemu-block@nongnu.org
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Hitoshi Mitake <mitake.hitoshi@lab.ntt.co.jp>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
This patch is the result of coccinelle script
scripts/coccinelle/typecast.cocci
CC: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
This patch is the result of coccinelle script
scripts/coccinelle/typecast.cocci
CC: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
This patch is the result of coccinelle script
scripts/coccinelle/typecast.cocci
CC: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
This patch is the result of coccinelle script
scripts/coccinelle/typecast.cocci
CC: Riku Voipio <riku.voipio@iki.fi>
CC: Alexander Graf <agraf@suse.de>
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Another attempt to fix the bug 1596870.
When creating new disk backed by remote file accessed via HTTPS and the
backing file has zero length, qemu-img terminates with uniformative
error message:
qemu-img: disk.qcow2: CURL: Error opening file:
While it may not make much sense to operate on empty file, other block
backends (e.g. raw backend for regular files) seem to allow it. This
patch fixes it for the curl backend and improves the reported error.
Signed-off-by: Tomáš Golembiovský <tgolembi@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Unused function declarations were found using a simple gcc plugin and
manually verified by grepping the sources.
Signed-off-by: Ladi Prosek <lprosek@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The page that was previously linked in the source code and the README file is
no longer available so it now returns a 404 error message.
This puts a previous snapshot from archive.org instead.
Signed-off-by: Reda Sallahi <fullmanet@gmail.com>
Acked-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
include/hw/xilinx.h is gone since commit d5001cf, drop.
include/hw/*/xlnx*.c is a typo, change .c to .h.
include/hw/acpi/piix.h is a typo, change piix.h to piix4.h.
hw/i386/*dsl and scripts/acpi*py are gone since since commit 9fc6502,
drop.
hw/virtio/dataplane/* are gone since commit fee089e, drop.
ICC Bus is gone since commit dfeb867, drop.
block/raw-aio.h was moved to include/block/raw-aio.h in commit
0187f5c, update.
Tracked down with
for i in `grep "^[FX]: " MAINTAINERS | sed "s/^.: //"`
do if [ ! -e "$i" ]; then echo "$i"; fi
done
Reported-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
This header seems to belong to the guest CPU section since it
contains prototypes for cpus.c.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
get_maintainer.pl now properly recognizes that the files in
include/hw/sh4/ belong to SH4.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
get_maintainer.pl now properly recognizes that the file in
include/hw/tricore/ belongs to TriCore.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
get_maintainer.pl now properly recognizes that the file in
include/hw/unicore32/ belongs to UniCore32.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Acked-by: Guan Xuetao <gxt@mprc.pku.edu.cn>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
In the QEMU monitor pane of the gtk user interface, the backspace
key is not working at all. This happens because of a missing mapping
of the key in the qcode_to_keysym[] table. Thus let's add an entry
there to get the backspace key working again.
Buglink: https://bugs.launchpad.net/qemu/+bug/1611979
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
host-utils.h and timer.h are included twice in tcg.c.
One time should be enough.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The HPPA backend has been removed by the following commit:
802b508123
tcg-hppa: Remove tcg backend
But some small pieces of the HPPA backend still survived until
today. Since we also do not have support for a HPPA target in
QEMU, we can nowadays safely remove the remaining HPPA parts
(like the disassembler code, or the detection of HPPA in the
configure script).
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
All operations that take a floatx80 as an operand need to have their
inputs checked for malformed encodings. In all of these cases, use the
function floatx80_invalid_encoding to perform the check. If an invalid
operand is found, raise an invalid operation exception, and then return
either NaN (for fp-typed results) or the integer indefinite value (the
minimum representable signed integer value, for int-typed results).
For the non-quiet comparison operations, this touches adjacent code in
order to pass style checks.
Signed-off-by: Andrew Dutcher <andrew@andrewdutcher.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1471392895-17324-1-git-send-email-andrew@andrewdutcher.com
[PMM: changed "1 << 63" to "1ULL << 63" to fix compile errors]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The about dialog in QEMU on Mac OS X is very plain and unhelpful. This patch
makes the about dialog look a lot better and have some descriptive information
on what version of QEMU the user is running.
Signed-off-by: John Arbuckle <programmingkidx@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: ED59936E-3EB2-46AB-9E33-AB26E382B884@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In user-mode emulation env->idt.base memory is
allocated in linux-user/main.c with
size 8*512 = 4096 (for 64-bit).
When fake interrupt EXCP_SYSCALL is thrown
do_interrupt_user checks destination privilege level
for this fake exception, and tries to read 4 bytes
at address base + (256 * 2^4)=4096, that causes
segfault.
Privlege level was checked only for int's, so lets
read dpl from memory only for this case.
Signed-off-by: Stanislav Shmarov <snarpix@gmail.com>
Message-Id: <1473773008-2588376-1-git-send-email-snarpix@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
If giving QEMU a log arg which asks to enable multiple
different trace event patterns such as
$QEMU -d trace:qio*,trace:qcrypto*
the parser will then invoke
trace_enable_events("qio*,trace:qcrypto*")
trace_enable_events("qcrypto*")
as when finding a 'trace:' prefix, it is not clever
enough to strip anything after the next comma. As
a result only the last 'trace:' match ever works.
Rather than trying to be more clever with parsing the
command line arg in place, simplify the code by
using g_strsplit to break it into individual strings
on ','. These resulting pieces can be directly used
without worrying about trailing data from the next
option.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1473186343-16704-1-git-send-email-berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Function qemu_chr_alloc returns NULL if it failed to open logfile by any reason,
says no write permission. For backends tty, stdio and msmouse, They need to
check this return value to avoid segfault in this case.
Signed-off-by: Lin Ma <lma@suse.com>
Cc: qemu-stable <qemu-stable@nongnu.org>
Message-Id: <20160914062250.22226-1-lma@suse.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The 900cfbc just removed two unchecked uses of strdup
in fill_psinfo and missed the rest in core_dump_filename.
This patch fixes it.
Signed-off-by: Wei Jiangang <weijg.fnst@cn.fujitsu.com>
Message-Id: <1459997185-15669-2-git-send-email-weijg.fnst@cn.fujitsu.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Make sure reset zeroes TSC_AUX, XCR0, PKRU. Move XSTATE_BV from the
"vmstate only" section to the "KVM only" section.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add -kernel_irqchip=split
./x86-run x86/eventinj.flat
qemu-system-x86_64 -enable-kvm -machine kernel_irqchip=split -cpu host
-device pc-testdev -device isa-debug-exit,iobase=0xf4,iosize=0x4 -vnc
none -serial stdio -device pci-testdev -kernel x86/eventinj.flat
enabling apic
paging enabled
cr0 = 80010011
cr3 = 7fff000
cr4 = 20
Sending vec 33 and 62 and mask one with TPR
irq1 running
irq1 running
After 33/62 TPR test
FAIL: TPR
irq0 running
irq0 running
Both irq1 and irq0 are executing twice.
kvm_entry: vcpu 0
kvm_exit: reason MSR_WRITE rip 0x401f33 info 0 0
kvm_apic: apic_write APIC_EOI = 0x0
kvm_eoi: apicid 0 vector 62
kvm_msr: msr_write 80b = 0x0
kvm_entry: vcpu 0
kvm_exit: reason PENDING_INTERRUPT rip 0x401f35 info 0 0
kvm_userspace_exit: reason KVM_EXIT_IRQ_WINDOW_OPEN (7)
kvm_inj_virq: irq 62
kvm_entry: vcpu 0
kvm_exit: reason IO_INSTRUCTION rip 0x4016ec info 3fd0008 0
From the trace we can see there is an interrupt window exit
after the first interrupt EOI(irq 62), and the same irq(62)
is injected duplicately after the interrupt window.
QEMU does KVM_INTERRUPT(62) ioctl after KVM exits with
KVM_EXIT_IRQ_WINDOW_OPEN, which QEMU requested while the
guest was printing. The printing calls
serial_update_irq() -> qemu_irq_lower() -> qemu_set_irq() ->
gsi_handler() -> qemu_set_irq() -> pic_irq_request() ->
apic_deliver_pic_intr() -> kvm_handle_interrupt()
kvm_handle_interrupt() does
interrupt_request |= CPU_INTERRUPT_HARD
which later calls cpu_get_pic_interrupt() in kvm_arch_pre_run(),
but that function uses stale information from APIC and injects
62 again. If we synchronized the APIC, then the test would #GP,
because there would be no injectable interrupt in LAPIC or PIC,
so pic_read_irq() would return 15, thinking it was spurious.
This patch fix it by don't touch LAPIC if LAPIC is in kernel.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Suggested-by: Radim Krčmář <rkrcmar@redhat.com>
Cc: qemu-stable@nongnu.org
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com>
Message-Id: <1473832464-3478-1-git-send-email-wanpeng.li@hotmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Vmware Paravirtual SCSI emulator while processing IO requests
could run into an infinite loop if 'pvscsi_ring_pop_req_descr'
always returned positive value. Limit IO loop to the ring size.
Cc: qemu-stable@nongnu.org
Reported-by: Li Qiang <liqiang6-s@360.cn>
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Message-Id: <1473845952-30785-1-git-send-email-ppandit@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It is equivalent to memory_region_destructor_ram, use that one.
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use socket_*() functions from include/qemu/sockets.h instead of
listen()/bind()/connect()/parse_host_port(). socket_*() fucntions are
QAPI based and this patch performs this api conversion since
everything will be using QAPI based sockets in the future. Also add a
helper function socket_address_to_string() in util/qemu-sockets.c
which returns the string representation of socket address. The task was
listed on http://wiki.qemu.org/BiteSizedTasks page.
Signed-off-by: Ashijeet Acharya <ashijeetacharya@gmail.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Handle alignment of buffers, so that the vector paths
can be used more often.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <1473800239-13841-1-git-send-email-rth@twiddle.net>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When processing IO request in mptsas, it uses g_new to allocate
a 'req' object. If an error occurs before 'req->sreq' is
allocated, It could lead to an OOB write in mptsas_free_request
function. Use g_new0 to avoid it.
Reported-by: Li Qiang <liqiang6-s@360.cn>
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Message-Id: <1473684251-17476-1-git-send-email-ppandit@redhat.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
With an ejected block backend, blk_get_aio_context() would return
qemu_aio_context. In this case don't assert.
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-Id: <1473848224-24809-3-git-send-email-famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Even if tray is not open, it can be empty (blk_is_inserted() == false).
Handle both cases correctly by replacing the s->tray_open checks with
blk_is_available(), which is an AND of the two.
Also simplify successive checks of them into blk_is_available(), in a
couple cases.
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-Id: <1473848224-24809-2-git-send-email-famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Windows uses object properties to determine the size of a file, so to
add object properties, we must also add a minimum set of new commands
and object properties. Most object properties are data that we already
have, except for the unique persistant object identifier. Windows
doesn't use this property, it seems, so we can cheat a bit and just use
the object handle for it.
Signed-off-by: Isaac Lozano <109lozanoi@gmail.com>
Message-id: a741d0dd380cd7eb1695e1eb34ee6f341183f20a.1470477265.git.109lozanoi@gmail.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
MTP requires that if a file is larger than 4gb or if sending data larger
than 4gb, that the length field be set to 0xFFFFFFFF.
Also widened a couple variables to prevent overflow errors.
Signed-off-by: Isaac Lozano <109lozanoi@gmail.com>
Message-id: 01ad8ec7775f58575801ac3f13716f553a16815e.1470477265.git.109lozanoi@gmail.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
There's no real knowledge of the cacheline size,
just prefetching one loop ahead.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Message-Id: <1472496380-19706-7-git-send-email-rth@twiddle.net>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
