KVM reports the number of available memory slots (KVM_CAP_NR_MEMSLOTS)
using the extension interface. Both x86 and s390 implement this, ARM
and powerpc do not yet enable it. Convert the static slots array to
be dynamically allocated, supporting more slots when available.
Default to 32 when KVM_CAP_NR_MEMSLOTS is not implemented. The
motivation for this change is to support more assigned devices, where
memory mapped PCI MMIO BARs typically take one slot each.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
# By Alexey Kardashevskiy (3) and others
# Via Paolo Bonzini
* qemu-kvm/uq/master:
target-i386: add feature kvm_pv_unhalt
linux-headers: update to 3.12-rc1
target-i386: forward CPUID cache leaves when -cpu host is used
linux-headers: update to 3.11
kvm: fix traces to use %x instead of %d
kvmvapic: Clear also physical ROM address when entering INACTIVE state
kvmvapic: Enter inactive state on hardware reset
kvmvapic: Catch invalid ROM size
kvm irqfd: support direct msimessage to irq translation
fix steal time MSR vmsd callback to proper opaque type
kvm: warn if num cpus is greater than num recommended
cpu: Move cpu state syncs up into cpu_dump_state()
exec: always use MADV_DONTFORK
Message-id: 1379694292-1601-1-git-send-email-pbonzini@redhat.com
On PPC64 systems MSI Messages are translated to system IRQ in a PCI
host bridge. This is already supported for emulated MSI/MSIX but
not for irqfd where the current QEMU allocates IRQ numbers from
irqchip and maps MSIMessages to IRQ in the host kernel.
This adds a new direct mapping flag which tells
the kvm_irqchip_add_msi_route() function that a new VIRQ
should not be allocated, instead the value from MSIMessage::data
should be used. It is up to the platform code to make sure that
this contains a valid IRQ number as sPAPR does in spapr_pci.c.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The comment in kvm_max_vcpus() states that it's using the recommended
procedure from the kernel API documentation to get the max number
of vcpus that kvm supports. It is, but by always returning the
maximum number supported. The maximum number should only be used
for development purposes. qemu should check KVM_CAP_NR_VCPUS for
the recommended number of vcpus. This patch adds a warning if a user
specifies a number of cpus between the recommended and max.
Signed-off-by: Andrew Jones <drjones@redhat.com>
Acked-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Make it a generic hook rather than a KVM hook. Less code and
ifdeffery.
Since the only user of the hook is old S390 KVM, there's hope we can
get rid of it some day.
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Message-id: 1375276272-15988-5-git-send-email-armbru@redhat.com
Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>
* qemu-kvm/uq/master:
kvm-stub: fix compilation
kvm: shorten the parameter list for get_real_device()
kvm: i386: fix LAPIC TSC deadline timer save/restore
kvm-all.c: max_cpus should not exceed KVM vcpu limit
kvm: Simplify kvm_handle_io
kvm: x86: fix setting IA32_FEATURE_CONTROL with nested VMX disabled
kvm: add KVM_IRQFD_FLAG_RESAMPLE support
kvm: migrate vPMU state
target-i386: remove tabs from target-i386/cpu.h
Initialize IA32_FEATURE_CONTROL MSR in reset and migration
Conflicts:
target-i386/cpu.h
target-i386/kvm.c
aliguori: fixup trivial conflicts due to whitespace and added cpu
argument
Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>
maxcpus, which specifies the maximum number of hotpluggable CPUs,
should not exceed KVM's vcpu limit.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
[Reword message. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Now that cpu_in/out is just a wrapper around address_space_rw, we can
also call the latter directly. As host endianness == guest endianness,
there is no need for the memory access helpers st*_p/ld*_p as well.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Added an EventNotifier* parameter to
kvm-all.c:kvm_irqchip_add_irqfd_notifier(), in order to give KVM
another eventfd to be used as "resamplefd". See the documentation
in the linux kernel sources in Documentation/virtual/kvm/api.txt
(section 4.75) for more details.
When the added parameter is passed NULL, the behaviour of the
function is unchanged with respect to the previous versions.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Vincenzo Maffione <v.maffione@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Passing a CPUState pointer instead of a CPUArchState pointer eliminates
the last target dependent data type in sysemu/kvm.h.
It also simplifies the code.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
CPUArchState is no longer directly used since converting CPU loops to
CPUState.
Prepares for changing GDBState::c_cpu to CPUState.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Prepares for changing cpu_single_step() argument to CPUState.
Acked-by: Michael Walle <michael@walle.cc> (for lm32)
Signed-off-by: Andreas Färber <afaerber@suse.de>
Move next_cpu from CPU_COMMON to CPUState.
Move first_cpu variable to qom/cpu.h.
gdbstub needs to use CPUState::env_ptr for now.
cpu_copy() no longer needs to save and restore cpu_next.
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
[AF: Rebased, simplified cpu_copy()]
Signed-off-by: Andreas Färber <afaerber@suse.de>
Since CPU loops are done as last step in kvm_{insert,remove}_breakpoint()
and kvm_remove_all_breakpoints(), we do not need to distinguish between
invoking CPU and iterated CPUs and can thereby free the identifier for
use as a global variable.
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Multiple -machine options with the same ID are merged. All but the
one without an ID are to be silently ignored.
In most places, we query these options with a null ID. This is
correct.
In some places, we instead query whatever options come first in the
list. This is wrong. When the -machine processed first happens to
have an ID, options are taken from that ID, and the ones specified
without ID are silently ignored.
Example:
$ upstream-qemu -nodefaults -S -display none -monitor stdio -machine id=foo -machine accel=kvm,usb=on
$ upstream-qemu -nodefaults -S -display none -monitor stdio -machine id=foo,accel=kvm,usb=on -machine accel=xen
$ upstream-qemu -nodefaults -S -display none -monitor stdio -machine accel=xen -machine id=foo,accel=kvm,usb=on
$ qemu-system-x86_64 -nodefaults -S -display none -monitor stdio -machine accel=kvm,usb=on
QEMU 1.5.50 monitor - type 'help' for more information
(qemu) info kvm
kvm support: enabled
(qemu) info usb
(qemu) q
$ qemu-system-x86_64 -nodefaults -S -display none -monitor stdio -machine id=foo -machine accel=kvm,usb=on
QEMU 1.5.50 monitor - type 'help' for more information
(qemu) info kvm
kvm support: disabled
(qemu) info usb
(qemu) q
$ qemu-system-x86_64 -nodefaults -S -display none -monitor stdio -machine id=foo,accel=kvm,usb=on -machine accel=xen
QEMU 1.5.50 monitor - type 'help' for more information
(qemu) info kvm
kvm support: enabled
(qemu) info usb
USB support not enabled
(qemu) q
$ qemu-system-x86_64 -nodefaults -S -display none -monitor stdio -machine accel=xen -machine id=foo,accel=kvm,usb=on
xc: error: Could not obtain handle on privileged command interface (2 = No such file or directory): Internal error
xen be core: can't open xen interface
failed to initialize Xen: Operation not permitted
Option usb is queried correctly, and the one without an ID wins,
regardless of option order.
Option accel is queried incorrectly, and which one wins depends on
option order and ID.
Affected options are accel (and its sugared forms -enable-kvm and
-no-kvm), kernel_irqchip, kvm_shadow_mem.
Additionally, option kernel_irqchip is normally on by default, except
it's off when no -machine options are given. Bug can't bite, because
kernel_irqchip is used only when KVM is enabled, KVM is off by
default, and enabling always creates -machine options. Downstreams
that enable KVM by default do get bitten, though.
Use qemu_get_machine_opts() to fix these bugs.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-id: 1372943363-24081-5-git-send-email-armbru@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
# By Paolo Bonzini (50) and others
# Via Paolo Bonzini
* bonzini/iommu-for-anthony: (66 commits)
exec: change some APIs to take AddressSpaceDispatch
exec: remove cur_map
exec: put memory map in AddressSpaceDispatch
exec: separate current radix tree from the one being built
exec: move listener from AddressSpaceDispatch to AddressSpace
memory: move MemoryListener declaration earlier
exec: separate current memory map from the one being built
exec: change well-known physical sections to macros
qom: Use atomics for object refcounting
memory: add reference counting to FlatView
memory: use a new FlatView pointer on every topology update
memory: access FlatView from a local variable
add a header file for atomic operations
hw/[u-x]*: pass owner to memory_region_init* functions
hw/t*: pass owner to memory_region_init* functions
hw/s*: pass owner to memory_region_init* functions
hw/p*: pass owner to memory_region_init* functions
hw/n*: pass owner to memory_region_init* functions
hw/m*: pass owner to memory_region_init* functions
hw/i*: pass owner to memory_region_init* functions
...
Message-id: 1372950842-32422-1-git-send-email-pbonzini@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Add ref/unref calls at the following places:
- places where memory regions are stashed by a listener and
used outside the BQL (including in Xen or KVM).
- memory_region_find callsites
- creation of aliases and containers (only the aliased/contained
region gets a reference to avoid loops)
- around calls to del_subregion/add_subregion, where the region
could disappear after the first call
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Some guests do a large number of mask/unmask
calls which currently trigger expensive route update
system calls.
Detect that route in unchanged and skip the system call.
Reported-by: "Zhanghaoyu (A)" <haoyu.zhang@huawei.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
kvm_add_routing_entry makes an attempt to
zero-initialize any new routing entry.
However, it fails to initialize padding
within the u field of the structure
kvm_irq_routing_entry.
Other functions like kvm_irqchip_update_msi_route
also fail to initialize the padding field in
kvm_irq_routing_entry.
It's better to just make sure all input is initialized.
Once it is, we can also drop complex field by field assignment and just
do the simple *a = *b to update a route entry.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
I try to hotplug 28 * 8 multiple-function devices to guest with
old host kernel, ioeventfds in host kernel will be exhausted, then
qemu fails to allocate ioeventfds for blk/nic devices.
It's better to add detail error here.
Signed-off-by: Amos Kong <akong@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
The current logic updates KVM's view of our interrupt map every time we
change it. While this is nice and bullet proof, it slows things down
badly for me. QEMU spends about 3 seconds on every start telling KVM what
news it has on its routing maps.
Instead, let's just synchronize the whole irq routing map as a whole when
we're done constructing it. For things that change during runtime, we can
still update the routing table on demand.
Signed-off-by: Alexander Graf <agraf@suse.de>
The usual MSI injection mechanism writes msi.data into memory using an
le32 wrapper. So on big endian guests, this swaps msg.data into the
expected byte order.
For irqfd however, we don't swap the payload right now, rendering
in-kernel MPIC emulation broken on PowerPC.
Swap msg.data to the correct endianness whenever we touch it.
Signed-off-by: Alexander Graf <agraf@suse.de>
On PPC, we can have different types of interrupt controllers, so we really
only know that we are going to use one when we created it.
Export kvm_init_irq_routing() to common code, so that we don't have to call
kvm_irqchip_create().
Signed-off-by: Alexander Graf <agraf@suse.de>
On PPC, we don't support MP state. So far it's not necessary and I'm
not convinced yet that we really need to support it ever.
However, the current idle logic in QEMU assumes that an in-kernel PIC
also means we support MP state. This assumption is not true anymore.
Let's split up the two cases into two different variables. That way
PPC can expose an in-kernel PIC, while not implementing MP state.
Signed-off-by: Alexander Graf <agraf@suse.de>
CC: Jan Kiszka <jan.kiszka@siemens.com>
It no longer uses CPUArchState.
Prepares for changing qemu_kvm_cpu_thread_fn() opaque to CPUState.
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Andreas Färber <afaerber@suse.de>
It no longer uses CPUArchState.
Prepares for changing kvm_cpu_exec() argument to CPUState.
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Make cpustats monitor command available unconditionally.
Prepares for changing kvm_handle_internal_error() and kvm_cpu_exec()
arguments to CPUState.
Signed-off-by: Andreas Färber <afaerber@suse.de>
CPUArchState is no longer needed.
Prepares for changing qemu_kvm_init_cpu_signals() argument to CPUState.
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Andreas Färber <afaerber@suse.de>
It no longer relies on CPUArchState since 20d695a.
Reviewed-by: liguang <lig.fnst@cn.fujitsu.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Andreas Färber <afaerber@suse.de>
So far, the size of all regions passed to listeners could fit in 64 bits,
because artificial regions (containers and aliases) are eliminated by
the memory core, leaving only device regions which have reasonable sizes
An IOMMU however cannot be eliminated by the memory core, and may have
an artificial size, hence we may need 65 bits to represent its size.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Luiz Capitulino reported that guest refused to boot and qemu
complained with:
kvm_set_phys_mem: error unregistering overlapping slot: Invalid argument
It is caused by commit 235e8982ad that did double free for the memslot
so that the second one raises the -EINVAL error
Fix it by reset memory size only if it is needed
Reported-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
For readonly memory regions and rom devices in romd_mode,
we make use of the KVM_MEM_READONLY. A slot that uses
KVM_MEM_READONLY can be read from and code can execute from the
region, but writes will exit to qemu.
For rom devices with !romd_mode, we force the slot to be
removed so reads or writes to the region will exit to qemu.
(Note that a memory region in this state is not executable
within kvm.)
v7:
* Update for readable => romd_mode rename (5f9a5ea1)
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com> (v4)
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> (v5)
Message-id: 1369816047-16384-4-git-send-email-jordan.l.justen@intel.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This is preparatory to the introduction of a separate freeing API.
Reported-by: Amos Kong <akong@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Amos Kong <akong@redhat.com>
Message-id: 1368454796-14989-2-git-send-email-pbonzini@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This patch enable us to know exit reason of KVM_RUN. It will help us
know where the trouble is caused.
Signed-off-by: Kazuya Saito <saito.kazuya@jp.fujitsu.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This patch adds tracepoints at ioctl to kvm. Tracing these ioctl is
useful for clarification whether the cause of troubles is qemu or kvm.
Signed-off-by: Kazuya Saito <saito.kazuya@jp.fujitsu.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
If hotplugged, synchronize CPU state to KVM.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
This adds a new device that we can use for testing PCI PIO and MMIO, with and
without ioeventfd in different configurations. FAST_MMIO will be added if/when
kvm supports it. Also included are minor cleanups in kvm APIs that it needs.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.13 (GNU/Linux)
iQEcBAABAgAGBQJRbIJQAAoJECgfDbjSjVRpQuoH/RfMHb6YYfsuwJKUsjCKxhdr
695YqNsBLmh7E/+wr1dwUsKrMGSF97VSGAIPeX0u4wwP6jrORhA9iycCevXYlh/S
O7RTcePqVEQrwnMX5rOAEWGARVzg4hAT8i4Pdza1A+gBvaO/WLZIVJfUOHBAZNL7
2TTDymfixipErcTcxckITHfaShn9ajZgt/Yo8oVX70VqklWU+OEU/tYEXmvTC0H3
bTuTU3vpeAlCubF0AHHZqWA9g7myrKMCxwv4LWx7gmQGXoyQesy4s5C9KMrld1On
RovLw0REbtjB2xGjAj3g82ESK5eoi295Th/E7Fu1NJNYyDyfhxB7/cnbRa+Wpsg=
=jvZE
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'mst/tags/for_anthony' into staging
pci: add pci test device
This adds a new device that we can use for testing PCI PIO and MMIO, with and
without ioeventfd in different configurations. FAST_MMIO will be added if/when
kvm supports it. Also included are minor cleanups in kvm APIs that it needs.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Mon 15 Apr 2013 05:42:24 PM CDT using RSA key ID D28D5469
# gpg: Can't check signature: public key not found
# By Michael S. Tsirkin
# Via Michael S. Tsirkin
* mst/tags/for_anthony:
pci: add pci test device
kvm: support non datamatch ioeventfd
kvm: support any size for pio eventfd
kvm: remove unused APIs
Message-id: cover.1366272004.git.mst@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
... so it could be called without requiring CPUArchState.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Move it to qom/cpu.h to avoid issues with include order.
Change pc_acpi_smi_interrupt() opaque to X86CPU.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Both fields are used in VMState, thus need to be moved together.
Explicitly zero them on reset since they were located before
breakpoints.
Pass PowerPCCPU to kvmppc_handle_halt().
Signed-off-by: Andreas Färber <afaerber@suse.de>
Since commit 20d695a925 (kvm: Pass
CPUState to kvm_arch_*) CPUArchState is no longer needed.
Allows to change qemu_kvm_eat_signals() argument as well.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Gleb Natapov <gleb@redhat.com>
This will allow each architecture to define how the VCPU ID is set on
the KVM_CREATE_VCPU ioctl call.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Acked-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
