Initially data_end is set to the data_off image header field and must not
be greater than the file size.
Signed-off-by: Alexander Ivanov <alexander.ivanov@virtuozzo.com>
Reviewed-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: Denis V. Lunev <den@openvz.org>
The BDRVParallelsState structure contains data_end field that is measured
in sectors. In parallels_open() initially this field is set by data_off
field from parallels image header.
According to the parallels format documentation, data_off field contains
an offset, in sectors, from the start of the file to the start of the
data area. For "WithoutFreeSpace" images: if data_off is zero, the offset
is calculated as the end of the BAT table plus some padding to ensure
sector size alignment.
The parallels_open() function has code for handling zero value in
data_off, but in the result data_end contains the offset in bytes.
Replace the alignment to sector size by division by sector size and fix
the comparision with s->header_size.
Signed-off-by: Alexander Ivanov <alexander.ivanov@virtuozzo.com>
Reviewed-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Hanna Czenczek <hreitz@redhat.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
This patch is technically necessary as git patch rendering could result
in moving some code from one place to the another and that hits
checkpatch.pl warning. This problem specifically happens within next
series.
Signed-off-by: Alexander Ivanov <alexander.ivanov@virtuozzo.com>
Reviewed-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: Denis V. Lunev <den@openvz.org>
When target image is using subclusters, and we align the request during
copy-on-read, it makes sense to align to subcluster_size rather than
cluster_size. Otherwise we end up with unnecessary allocations.
This commit renames bdrv_round_to_clusters() to bdrv_round_to_subclusters()
and utilizes subcluster_size field of BlockDriverInfo to make necessary
alignments. It affects copy-on-read as well as mirror job (which is
using bdrv_round_to_clusters()).
This change also fixes the following bug with failing assert (covered by
the test in the subsequent commit):
qemu-img create -f qcow2 base.qcow2 64K
qemu-img create -f qcow2 -o extended_l2=on,backing_file=base.qcow2,backing_fmt=qcow2 img.qcow2 64K
qemu-io -c "write -P 0xaa 0 2K" img.qcow2
qemu-io -C -c "read -P 0x00 2K 62K" img.qcow2
qemu-io: ../block/io.c:1236: bdrv_co_do_copy_on_readv: Assertion `skip_bytes < pnum' failed.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: Andrey Drobyshev <andrey.drobyshev@virtuozzo.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-ID: <20230711172553.234055-3-andrey.drobyshev@virtuozzo.com>
This is going to be used in the subsequent commit as requests alignment
(in particular, during copy-on-read). This value only makes sense for
the formats which support subclusters (currently QCOW2 only). If this
field isn't set by driver's own bdrv_get_info() implementation, we
simply set it equal to the cluster size thus treating each cluster as
having a single subcluster.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: Andrey Drobyshev <andrey.drobyshev@virtuozzo.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-ID: <20230711172553.234055-2-andrey.drobyshev@virtuozzo.com>
As Hanna pointed out, it is not clear in the code why qemu_open()
can fail, and why blkio_set_int("fd") is not enough to discover
the `fd` property support.
Let's fix them by adding more details in the code comments.
Suggested-by: Hanna Czenczek <hreitz@redhat.com>
Reviewed-by: Hanna Czenczek <hreitz@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-id: 20230803082825.25293-3-sgarzare@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
libblkio drivers take ownership of `fd` only after a successful
blkio_connect(), so if it fails, we are still the owners.
Fixes: cad2ccc395 ("block/blkio: use qemu_open() to support fd passing for virtio-blk")
Suggested-by: Hanna Czenczek <hreitz@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Hanna Czenczek <hreitz@redhat.com>
Message-id: 20230803082825.25293-2-sgarzare@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Please include these bug fixes in QEMU 8.1. Thanks!
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEhpWov9P5fNqsNXdanKSrs4Grc8gFAmTCzPUACgkQnKSrs4Gr
c8g1DAf/fPUQ4zRsCn079pHIyK9TFo4COm23p4kiusxj8otfjt8LH1Zsc9pGWC2+
bl2RlnPID8JlyJFDRN7b/RCEhj45a83GtCmhDDmqVgy1eO5vwOKm2XyyWeD+pq/U
Hf2QLPLZZ7tCD8Njpty+gB3Ux4zqthKGXSg8FpJ3w0tl4me2efLvjMa6jHMwtnHT
aAbyQ3WMpT9w4XHLqRQDHzBqrTSY4od3nl9SrM/DQ2klLIcz8ECTEZVBY9B3pq6m
QvAg24tfb0QvS14YnZv/PMCfOaVuE87M9G4f93pCynnMxMYze+XczL0sGhIAS9wp
03NgGlhGumOix6r2kHjlG6p3xywV8A==
=jMf8
-----END PGP SIGNATURE-----
Merge tag 'block-pull-request' of https://gitlab.com/stefanha/qemu into staging
Pull request
Please include these bug fixes in QEMU 8.1. Thanks!
# -----BEGIN PGP SIGNATURE-----
#
# iQEzBAABCAAdFiEEhpWov9P5fNqsNXdanKSrs4Grc8gFAmTCzPUACgkQnKSrs4Gr
# c8g1DAf/fPUQ4zRsCn079pHIyK9TFo4COm23p4kiusxj8otfjt8LH1Zsc9pGWC2+
# bl2RlnPID8JlyJFDRN7b/RCEhj45a83GtCmhDDmqVgy1eO5vwOKm2XyyWeD+pq/U
# Hf2QLPLZZ7tCD8Njpty+gB3Ux4zqthKGXSg8FpJ3w0tl4me2efLvjMa6jHMwtnHT
# aAbyQ3WMpT9w4XHLqRQDHzBqrTSY4od3nl9SrM/DQ2klLIcz8ECTEZVBY9B3pq6m
# QvAg24tfb0QvS14YnZv/PMCfOaVuE87M9G4f93pCynnMxMYze+XczL0sGhIAS9wp
# 03NgGlhGumOix6r2kHjlG6p3xywV8A==
# =jMf8
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 27 Jul 2023 01:00:53 PM PDT
# gpg: using RSA key 8695A8BFD3F97CDAAC35775A9CA4ABB381AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>" [full]
# gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>" [full]
* tag 'block-pull-request' of https://gitlab.com/stefanha/qemu:
block/blkio: use blkio_set_int("fd") to check fd support
block/blkio: fall back on using `path` when `fd` setting fails
block/blkio: retry blkio_connect() if it fails using `fd`
block/blkio: move blkio_connect() in the drivers functions
block: Fix pad_request's request restriction
block/file-posix: fix g_file_get_contents return path
block/blkio: do not use open flags in qemu_open()
block/blkio: enable the completion eventfd
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Setting the `fd` property fails with virtio-blk-* libblkio drivers
that do not support fd passing since
https://gitlab.com/libblkio/libblkio/-/merge_requests/208.
Getting the `fd` property, on the other hand, always succeeds for
virtio-blk-* libblkio drivers even when they don't support fd passing.
This patch switches to setting the `fd` property because it is a
better mechanism for probing fd passing support than getting the `fd`
property.
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-id: 20230727161020.84213-5-sgarzare@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
qemu_open() fails if called with an unix domain socket in this way:
-blockdev node-name=drive0,driver=virtio-blk-vhost-user,path=vhost-user-blk.sock,cache.direct=on: Could not open 'vhost-user-blk.sock': No such device or address
Since virtio-blk-vhost-user does not support fd passing, let`s always fall back
on using `path` if we fail the fd passing.
Fixes: cad2ccc395 ("block/blkio: use qemu_open() to support fd passing for virtio-blk")
Reported-by: Qing Wang <qinwang@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-id: 20230727161020.84213-4-sgarzare@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
libblkio 1.3.0 added support of "fd" property for virtio-blk-vhost-vdpa
driver. In QEMU, starting from commit cad2ccc395 ("block/blkio: use
qemu_open() to support fd passing for virtio-blk") we are using
`blkio_get_int(..., "fd")` to check if the "fd" property is supported
for all the virtio-blk-* driver.
Unfortunately that property is also available for those driver that do
not support it, such as virtio-blk-vhost-user.
So, `blkio_get_int()` is not enough to check whether the driver supports
the `fd` property or not. This is because the virito-blk common libblkio
driver only checks whether or not `fd` is set during `blkio_connect()`
and fails with -EINVAL for those transports that do not support it
(all except vhost-vdpa for now).
So let's handle the `blkio_connect()` failure, retrying it using `path`
directly.
Fixes: cad2ccc395 ("block/blkio: use qemu_open() to support fd passing for virtio-blk")
Suggested-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-id: 20230727161020.84213-3-sgarzare@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This is in preparation for the next patch, where for virtio-blk
drivers we need to handle the failure of blkio_connect().
Let's also rename the *_open() functions to *_connect() to make
the code reflect the changes applied.
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-id: 20230727161020.84213-2-sgarzare@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
bdrv_pad_request() relies on requests' lengths not to exceed SIZE_MAX,
which bdrv_check_qiov_request() does not guarantee.
bdrv_check_request32() however will guarantee this, and both of
bdrv_pad_request()'s callers (bdrv_co_preadv_part() and
bdrv_co_pwritev_part()) already run it before calling
bdrv_pad_request(). Therefore, bdrv_pad_request() can safely call
bdrv_check_request32() without expecting error, too.
In effect, this patch will not change guest-visible behavior. It is a
clean-up to tighten a condition to match what is guaranteed by our
callers, and which exists purely to show clearly why the subsequent
assertion (`assert(*bytes <= SIZE_MAX)`) is always true.
Note there is a difference between the interfaces of
bdrv_check_qiov_request() and bdrv_check_request32(): The former takes
an errp, the latter does not, so we can no longer just pass
&error_abort. Instead, we need to check the returned value. While we
do expect success (because the callers have already run this function),
an assert(ret == 0) is not much simpler than just to return an error if
it occurs, so let us handle errors by returning them up the stack now.
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Hanna Czenczek <hreitz@redhat.com>
Message-id: 20230714085938.202730-1-hreitz@redhat.com
Fixes: 18743311b8
("block: Collapse padded I/O vecs exceeding IOV_MAX")
Signed-off-by: Hanna Czenczek <hreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The g_file_get_contents() function returns a g_boolean. If it fails, the
returned value will be 0 instead of -1. Solve the issue by skipping
assigning ret value.
This issue was found by Matthew Rosato using virtio-blk-{pci,ccw} backed
by an NVMe partition e.g. /dev/nvme0n1p1 on s390x.
Signed-off-by: Sam Li <faithilikerun@gmail.com>
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20230727115844.8480-1-faithilikerun@gmail.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
qemu_open() in blkio_virtio_blk_common_open() is used to open the
character device (e.g. /dev/vhost-vdpa-0 or /dev/vfio/vfio) or in
the future eventually the unix socket.
In all these cases we cannot open the path in read-only mode,
when the `read-only` option of blockdev is on, because the exchange
of IOCTL commands for example will fail.
In order to open the device read-only, we have to use the `read-only`
property of the libblkio driver as we already do in blkio_file_open().
Fixes: cad2ccc395 ("block/blkio: use qemu_open() to support fd passing for virtio-blk")
Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=2225439
Reported-by: Qing Wang <qinwang@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20230726074807.14041-1-sgarzare@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Until libblkio 1.3.0, virtio-blk drivers had completion eventfd
notifications enabled from the start, but from the next releases
this is no longer the case, so we have to explicitly enable them.
In fact, the libblkio documentation says they could be disabled,
so we should always enable them at the start if we want to be
sure to get completion eventfd notifications:
By default, the driver might not generate completion events for
requests so it is necessary to explicitly enable the completion
file descriptor before use:
void blkioq_set_completion_fd_enabled(struct blkioq *q, bool enable);
I discovered this while trying a development version of libblkio:
the guest kernel hangs during boot, while probing the device.
Fixes: fd66dbd424 ("blkio: add libblkio block driver")
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-id: 20230725103744.77343-1-sgarzare@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Our code relies on a sentinel cookie value of zero for deciding when a
packet has been handled, as well as relying on array indices between 0
and MAX_NBD_REQUESTS-1 for dereferencing purposes. As long as we can
symmetrically convert between two forms, there is no reason to go with
the odd choice of using XOR with a random pointer, when we can instead
simplify the mappings with a mere offset of 1.
Using ((uint64_t)-1) as the sentinel instead of NULL such that the two
macros could be entirely eliminated might also be possible, but would
require a more careful audit to find places where we currently rely on
zero-initialization to be interpreted as the sentinel value, so I did
not pursue that course.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-ID: <20230608135653.2918540-7-eblake@redhat.com>
[eblake: enhance commit message]
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Externally, libnbd exposed the 64-bit opaque marker for each client
NBD packet as the "cookie", because it was less confusing when
contrasted with 'struct nbd_handle *' holding all libnbd state. It
also avoids confusion between the noun 'handle' as a way to identify a
packet and the verb 'handle' for reacting to things like signals.
Upstream NBD changed their spec to favor the name "cookie" based on
libnbd's recommendations[1], so we can do likewise.
[1] https://github.com/NetworkBlockDevice/nbd/commit/ca4392eb2b
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-ID: <20230608135653.2918540-6-eblake@redhat.com>
[eblake: typo fix]
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
blk_io_plug_call() is invoked outside a blk_io_plug()/blk_io_unplug()
section while opening the NVMe drive from:
nvme_file_open() ->
nvme_init() ->
nvme_identify() ->
nvme_admin_cmd_sync() ->
nvme_submit_command() ->
blk_io_plug_call()
blk_io_plug_call() immediately invokes the given callback when the
current thread is not plugged, as is the case during nvme_file_open().
Unfortunately, nvme_submit_command() calls blk_io_plug_call() with
q->lock still held:
...
q->sq.tail = (q->sq.tail + 1) % NVME_QUEUE_SIZE;
q->need_kick++;
blk_io_plug_call(nvme_unplug_fn, q);
qemu_mutex_unlock(&q->lock);
^^^^^^^^^^^^^^^^^^^^^^^^^^^
nvme_unplug_fn() deadlocks trying to acquire q->lock because the lock is
already acquired by the same thread. The symptom is that QEMU hangs
during startup while opening the NVMe drive.
Fix this by moving the blk_io_plug_call() outside q->lock. This is safe
because no other thread runs code related to this queue and
blk_io_plug_call()'s internal state is immune to thread safety issues
since it is thread-local.
Reported-by: Lukáš Doktor <ldoktor@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Tested-by: Lukas Doktor <ldoktor@redhat.com>
Message-id: 20230712191628.252806-1-stefanha@redhat.com
Fixes: f2e590002b ("block/nvme: convert to blk_io_plug_call() API")
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
When QEMU is built with --enable-modules, the module_block.py script
parses block/*.c to find block drivers that are built as modules. The
script generates a table of block drivers called block_driver_modules[].
This table is used for block driver module loading.
The blkio.c driver uses macros to define its BlockDriver structs. This
was done to avoid code duplication but the module_block.py script is
unable to parse the macro. The result is that libblkio-based block
drivers can be built as modules but will not be found at runtime.
One fix is to make the module_block.py script or build system fancier so
it can parse C macros (e.g. by parsing the preprocessed source code). I
chose not to do this because it raises the complexity of the build,
making future issues harder to debug.
Keep things simple: use the macro to avoid duplicating BlockDriver
function pointers but define .format_name and .protocol_name manually
for each BlockDriver. This way the module_block.py is able to parse the
code.
Also get rid of the block driver name macros (e.g. DRIVER_IO_URING)
because module_block.py cannot parse them either.
Fixes: fd66dbd424 ("blkio: add libblkio block driver")
Reported-by: Qing Wang <qinwang@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Message-id: 20230704123436.187761-1-stefanha@redhat.com
Cc: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
- Re-enable the graph lock
- More fixes to coroutine_fn marking
-----BEGIN PGP SIGNATURE-----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=ZQcP
-----END PGP SIGNATURE-----
Merge tag 'for-upstream' of https://repo.or.cz/qemu/kevin into staging
Block layer patches
- Re-enable the graph lock
- More fixes to coroutine_fn marking
# -----BEGIN PGP SIGNATURE-----
#
# iQJFBAABCAAvFiEE3D3rFZqa+V09dFb+fwmycsiPL9YFAmScQCQRHGt3b2xmQHJl
# ZGhhdC5jb20ACgkQfwmycsiPL9bNSA//WIzPT45rFhl2U9QgyOJu26ho6ahsgwgI
# Z3QM5kCDB1dAN9USRPxhGboLGo8CyY7eeSwSrR7RtwBGYrWrAoJfGp5gK/7d9s5Q
# o0AGgRPnJGhFkBhRRMytsDsewM6Kk4IRmk4HMK3cOH3rsSM8RHs6KmDSBKesllu0
# QVGf3qW4u8LHyZyGM5OlPVUbtuDuK6/52FGhpXBp+x4oyNegOhjwO4mGOvTG+xIk
# Q5zwWZaPfjxaEDkvW8iahB6/D7Tpt64BmMf1Ydhxcd5eKEp932CiBI36aAlNKoRD
# Al5wztRx1GEh12ekN39jIi7Ypp3JX26keJcieKU0q656pT551UFRYjU0Rk08/Cca
# qv2oiQDu6bHgQ9zCQ1nMfa9+K2MyBwx0b5qfYkvs2RzgCTl8ImgBQANHfw8tz6Bq
# HUo1zsFBXCaK0boUB5iFwdf3rlx3t9UTEuDej/RaHqZjZD5xeG/smCcOlSfHaKUa
# wXfYxvm8ZfefJn1D6io1A+7M956uvIQNtmh13cU44clgFX9Y/bBNMg/5lMRsJKo8
# xxjvqCAyxo/pPfUsVWx4pc8AXbfVa85gyoSiaLEYZnqP54sJ2lFccqykCsTy58Lo
# VDcoPnoSc+LNqBOvtzxXgQbEWFCXU6fe0+TZgVYUvExWFIAOImeDWg2GD1JVrwsX
# e9QrPhL3DXg=
# =ZQcP
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 28 Jun 2023 04:13:56 PM CEST
# gpg: using RSA key DC3DEB159A9AF95D3D7456FE7F09B272C88F2FD6
# gpg: issuer "kwolf@redhat.com"
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" [full]
* tag 'for-upstream' of https://repo.or.cz/qemu/kevin: (23 commits)
block: use bdrv_co_debug_event in coroutine context
block: use bdrv_co_getlength in coroutine context
qcow2: mark more functions as coroutine_fns and GRAPH_RDLOCK
vhdx: mark more functions as coroutine_fns and GRAPH_RDLOCK
vmdk: mark more functions as coroutine_fns and GRAPH_RDLOCK
dmg: mark more functions as coroutine_fns and GRAPH_RDLOCK
cloop: mark more functions as coroutine_fns and GRAPH_RDLOCK
block: mark another function as coroutine_fns and GRAPH_UNLOCKED
bochs: mark more functions as coroutine_fns and GRAPH_RDLOCK
vpc: mark more functions as coroutine_fns and GRAPH_RDLOCK
qed: mark more functions as coroutine_fns and GRAPH_RDLOCK
file-posix: remove incorrect coroutine_fn calls
Revert "graph-lock: Disable locking for now"
graph-lock: Unlock the AioContext while polling
blockjob: Fix AioContext locking in block_job_add_bdrv()
block: Fix AioContext locking in bdrv_open_backing_file()
block: Fix AioContext locking in bdrv_open_inherit()
block: Fix AioContext locking in bdrv_reopen_parse_file_or_backing()
block: Fix AioContext locking in bdrv_attach_child_common()
block: Fix AioContext locking in bdrv_open_child()
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
bdrv_co_debug_event was recently introduced, with bdrv_debug_event
becoming a wrapper for use in unknown context. Because most of the
time bdrv_debug_event is used on a BdrvChild via the wrapper macro
BLKDBG_EVENT, introduce a similar macro BLKDBG_CO_EVENT that calls
bdrv_co_debug_event, and switch whenever possible.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20230601115145.196465-13-pbonzini@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
bdrv_co_getlength was recently introduced, with bdrv_getlength becoming
a wrapper for use in unknown context. Switch to bdrv_co_getlength when
possible.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20230601115145.196465-12-pbonzini@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Mark functions as coroutine_fn when they are only called by other coroutine_fns
and they can suspend. Change calls to co_wrappers to use the non-wrapped
functions, which in turn requires adding GRAPH_RDLOCK annotations.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20230601115145.196465-11-pbonzini@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Mark functions as coroutine_fn when they are only called by other coroutine_fns
and they can suspend. Change calls to co_wrappers to use the non-wrapped
functions, which in turn requires adding GRAPH_RDLOCK annotations.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20230601115145.196465-10-pbonzini@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Mark functions as coroutine_fn when they are only called by other coroutine_fns
and they can suspend. Change calls to co_wrappers to use the non-wrapped
functions, which in turn requires adding GRAPH_RDLOCK annotations.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20230601115145.196465-9-pbonzini@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Mark functions as coroutine_fn when they are only called by other coroutine_fns
and they can suspend. Change calls to co_wrappers to use the non-wrapped
functions, which in turn requires adding GRAPH_RDLOCK annotations.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20230601115145.196465-8-pbonzini@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Mark functions as coroutine_fn when they are only called by other coroutine_fns
and they can suspend. Change calls to co_wrappers to use the non-wrapped
functions, which in turn requires adding GRAPH_RDLOCK annotations.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20230601115145.196465-7-pbonzini@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Mark functions as coroutine_fn when they are only called by other coroutine_fns
and they can suspend. Change calls to co_wrappers to use the non-wrapped
functions, which in turn requires adding GRAPH_RDLOCK annotations.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20230601115145.196465-5-pbonzini@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Mark functions as coroutine_fn when they are only called by other coroutine_fns
and they can suspend. Change calls to co_wrappers to use the non-wrapped
functions, which in turn requires adding GRAPH_RDLOCK annotations.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20230601115145.196465-4-pbonzini@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Mark functions as coroutine_fn when they are only called by other coroutine_fns
and they can suspend. Change calls to co_wrappers to use the non-wrapped
functions, which in turn requires adding GRAPH_RDLOCK annotations.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20230601115145.196465-3-pbonzini@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
raw_co_getlength is called by handle_aiocb_write_zeroes, which is not a coroutine
function. This is harmless because raw_co_getlength does not actually suspend,
but in the interest of clarity make it a non-coroutine_fn that is just wrapped
by the coroutine_fn raw_co_getlength. Likewise, check_cache_dropped was only
a coroutine_fn because it called raw_co_getlength, so it can be made non-coroutine
as well.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20230601115145.196465-2-pbonzini@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Now that bdrv_graph_wrlock() temporarily drops the AioContext lock that
its caller holds, it can poll without causing deadlocks. We can now
re-enable graph locking.
This reverts commit ad128dff0bf4b6f971d05eb4335a627883a19c1d.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-ID: <20230605085711.21261-12-kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
If the caller keeps the AioContext lock for a block node in an iothread,
polling in bdrv_graph_wrlock() deadlocks if the condition isn't
fulfilled immediately.
Now that all callers make sure to actually have the AioContext locked
when they call bdrv_replace_child_noperm() like they should, we can
change bdrv_graph_wrlock() to take a BlockDriverState whose AioContext
lock the caller holds (NULL if it doesn't) and unlock it temporarily
while polling.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-ID: <20230605085711.21261-11-kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Slave/master nomenclature was replaced with backend/frontend in commit
1fc19b6527 ("vhost-user: Adopt new backend naming")
This patch replaces all remaining uses of master and slave in the
codebase.
Signed-off-by: Emmanouil Pitsidianakis <manos.pitsidianakis@linaro.org>
Message-Id: <20230613080849.2115347-1-manos.pitsidianakis@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
We use the user_ss[] array to hold the user emulation sources,
and the softmmu_ss[] array to hold the system emulation ones.
Hold the latter in the 'system_ss[]' array for parity with user
emulation.
Mechanical change doing:
$ sed -i -e s/softmmu_ss/system_ss/g $(git grep -l softmmu_ss)
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230613133347.82210-10-philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Mechanical change running Coccinelle spatch with content
generated from the qom-cast-macro-clean-cocci-gen.py added
in the previous commit.
Suggested-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230601093452.38972-3-philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
When we for example have a sparse qcow2 image and discard: unmap is enabled,
there can be a lot of fragmentation in the image after some time. Especially on VM's
that do a lot of writes/deletes.
This causes the qcow2 image to grow even over 110% of its virtual size,
because the free gaps in the image get too small to allocate new
continuous clusters. So it allocates new space at the end of the image.
Disabling discard is not an option, as discard is needed to keep the
incremental backup size as low as possible. Without discard, the
incremental backups would become large, as qemu thinks it's just dirty
blocks but it doesn't know the blocks are unneeded.
So we need to avoid fragmentation but also 'empty' the unneeded blocks in
the image to have a small incremental backup.
In addition, we also want to send the discards further down the stack, so
the underlying blocks are still discarded.
Therefor we introduce a new qcow2 option "discard-no-unref".
When setting this option to true, discards will no longer have the qcow2
driver relinquish cluster allocations. Other than that, the request is
handled as normal: All clusters in range are marked as zero, and, if
pass-discard-request is true, it is passed further down the stack.
The only difference is that the now-zero clusters are preallocated
instead of being unallocated.
This will avoid fragmentation on the qcow2 image.
Fixes: https://gitlab.com/qemu-project/qemu/-/issues/1621
Signed-off-by: Jean-Louis Dupond <jean-louis@dupond.be>
Message-Id: <20230605084523.34134-2-jean-louis@dupond.be>
Reviewed-by: Hanna Czenczek <hreitz@redhat.com>
Signed-off-by: Hanna Czenczek <hreitz@redhat.com>
All the offsets in the BAT must be lower than the file size.
Fix the check condition for correct check.
Signed-off-by: Alexander Ivanov <alexander.ivanov@virtuozzo.com>
Reviewed-by: Denis V. Lunev <den@openvz.org>
Message-Id: <20230424093147.197643-13-alexander.ivanov@virtuozzo.com>
Reviewed-by: Hanna Czenczek <hreitz@redhat.com>
Signed-off-by: Hanna Czenczek <hreitz@redhat.com>
Replace the way we use mutex in parallels_co_check() for simplier
and less error prone code.
Signed-off-by: Alexander Ivanov <alexander.ivanov@virtuozzo.com>
Reviewed-by: Denis V. Lunev <den@openvz.org>
Message-Id: <20230424093147.197643-12-alexander.ivanov@virtuozzo.com>
Reviewed-by: Hanna Czenczek <hreitz@redhat.com>
Signed-off-by: Hanna Czenczek <hreitz@redhat.com>
We will add more and more checks so we need a better code structure
in parallels_co_check. Let each check performs in a separate loop
in a separate helper.
Signed-off-by: Alexander Ivanov <alexander.ivanov@virtuozzo.com>
Reviewed-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Message-Id: <20230424093147.197643-11-alexander.ivanov@virtuozzo.com>
Reviewed-by: Hanna Czenczek <hreitz@redhat.com>
Signed-off-by: Hanna Czenczek <hreitz@redhat.com>
We will add more and more checks so we need a better code structure
in parallels_co_check. Let each check performs in a separate loop
in a separate helper.
Signed-off-by: Alexander Ivanov <alexander.ivanov@virtuozzo.com>
Message-Id: <20230424093147.197643-10-alexander.ivanov@virtuozzo.com>
Reviewed-by: Hanna Czenczek <hreitz@redhat.com>
Signed-off-by: Hanna Czenczek <hreitz@redhat.com>
Exclude out-of-image clusters from allocated and fragmented clusters
calculation.
Signed-off-by: Alexander Ivanov <alexander.ivanov@virtuozzo.com>
Message-Id: <20230424093147.197643-9-alexander.ivanov@virtuozzo.com>
Reviewed-by: Hanna Czenczek <hreitz@redhat.com>
Signed-off-by: Hanna Czenczek <hreitz@redhat.com>
We will add more and more checks so we need a better code structure in
parallels_co_check. Let each check performs in a separate loop in a
separate helper.
Signed-off-by: Alexander Ivanov <alexander.ivanov@virtuozzo.com>
Reviewed-by: Denis V. Lunev <den@openvz.org>
Message-Id: <20230424093147.197643-8-alexander.ivanov@virtuozzo.com>
Reviewed-by: Hanna Czenczek <hreitz@redhat.com>
Signed-off-by: Hanna Czenczek <hreitz@redhat.com>
We will add more and more checks so we need a better code structure
in parallels_co_check. Let each check performs in a separate loop
in a separate helper.
Signed-off-by: Alexander Ivanov <alexander.ivanov@virtuozzo.com>
Reviewed-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Message-Id: <20230424093147.197643-7-alexander.ivanov@virtuozzo.com>
Reviewed-by: Hanna Czenczek <hreitz@redhat.com>
Signed-off-by: Hanna Czenczek <hreitz@redhat.com>
BAT is written in the context of conventional operations over the image
inside bdrv_co_flush() when it calls parallels_co_flush_to_os() callback.
Thus we should not modify BAT array directly, but call
parallels_set_bat_entry() helper and bdrv_co_flush() further on. After
that there is no need to manually write BAT and track its modification.
This makes code more generic and allows to split parallels_set_bat_entry()
for independent pieces.
Signed-off-by: Alexander Ivanov <alexander.ivanov@virtuozzo.com>
Reviewed-by: Denis V. Lunev <den@openvz.org>
Message-Id: <20230424093147.197643-6-alexander.ivanov@virtuozzo.com>
Reviewed-by: Hanna Czenczek <hreitz@redhat.com>
Signed-off-by: Hanna Czenczek <hreitz@redhat.com>
This helper will be reused in next patches during parallels_co_check
rework to simplify its code.
Signed-off-by: Alexander Ivanov <alexander.ivanov@virtuozzo.com>
Reviewed-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Message-Id: <20230424093147.197643-5-alexander.ivanov@virtuozzo.com>
Reviewed-by: Hanna Czenczek <hreitz@redhat.com>
Signed-off-by: Hanna Czenczek <hreitz@redhat.com>
Set data_end to the end of the last cluster inside the image. In such a
way we can be sure that corrupted offsets in the BAT can't affect on the
image size. If there are no allocated clusters set image_end_offset by
data_end.
Signed-off-by: Alexander Ivanov <alexander.ivanov@virtuozzo.com>
Reviewed-by: Denis V. Lunev <den@openvz.org>
Message-Id: <20230424093147.197643-4-alexander.ivanov@virtuozzo.com>
Reviewed-by: Hanna Czenczek <hreitz@redhat.com>
Signed-off-by: Hanna Czenczek <hreitz@redhat.com>
Don't let high_off be more than the file size even if we don't fix the
image.
Signed-off-by: Alexander Ivanov <alexander.ivanov@virtuozzo.com>
Reviewed-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Message-Id: <20230424093147.197643-3-alexander.ivanov@virtuozzo.com>
Reviewed-by: Hanna Czenczek <hreitz@redhat.com>
Signed-off-by: Hanna Czenczek <hreitz@redhat.com>
