CharDriverState.be should be updated to point to the current
associated backend.
Fix the regression introduced in the "mux" chardev from commit
a4afa548fc.
https://bugs.launchpad.net/bugs/1654137
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20170110110621.15287-1-marcandre.lureau@redhat.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
rcu_read_unlock was not called if the address_space_access_valid result is
negative.
This caused (at least) a problem when qemu on PPC/E500+TAP failed to terminate
properly and instead got stuck in a deadlock.
Signed-off-by: Roman Kapl <rka@sysgo.com>
Message-Id: <20170109110921.4931-1-rka@sysgo.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Split irqchip works based on the fact that we kept the first 24 gsi
routing entries inside KVM for userspace ioapic's use. When system
boot, we'll reserve these MSI routing entries before hand. However,
after migration, we forgot to re-configure it up in the destination
side. The result is, we'll get invalid gsi routing entries after
migration (all empty), and we get interrupts with vector=0, then
strange things happen, like keyboard hang.
The solution is simple - we update them after migration, which is a
one line fix.
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <1483952153-7221-4-git-send-email-peterx@redhat.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <1483952153-7221-3-git-send-email-peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
From time to time, there are issues with ioapic, either on guest side or
on hypervisor side. Good to have some persistent traces for better
triaging and debugging.
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <1483952153-7221-2-git-send-email-peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Remove the colon, and add it in qemu-options-wrapper.h instead.
The introduction of @subsection also found a case where the table
was not closed and reopened around a heading, so fix it.
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
QEMU will crash with the follow backtrace if the new created thread exited before
we call qemu_thread_set_name() for it.
(gdb) bt
#0 0x00007f9a68b095d7 in __GI_raise (sig=sig@entry=6) at ../nptl/sysdeps/unix/sysv/linux/raise.c:56
#1 0x00007f9a68b0acc8 in __GI_abort () at abort.c:90
#2 0x00007f9a69cda389 in PAT_abort () from /usr/lib64/libuvpuserhotfix.so
#3 0x00007f9a69cdda0d in patchIllInsHandler () from /usr/lib64/libuvpuserhotfix.so
#4 <signal handler called>
#5 pthread_setname_np (th=140298470549248, name=name@entry=0x8cc74a "io-task-worker") at ../nptl/sysdeps/unix/sysv/linux/pthread_setname.c:49
#6 0x00000000007f5f20 in qemu_thread_set_name (thread=thread@entry=0x7ffd2ac09680, name=name@entry=0x8cc74a "io-task-worker") at util/qemu_thread_posix.c:459
#7 0x00000000007f679e in qemu_thread_create (thread=thread@entry=0x7ffd2ac09680, name=name@entry=0x8cc74a "io-task-worker",start_routine=start_routine@entry=0x7c1300 <qio_task_thread_worker>, arg=arg@entry=0x7f99b8001720, mode=mode@entry=1) at util/qemu_thread_posix.c:498
#8 0x00000000007c15b6 in qio_task_run_in_thread (task=task@entry=0x7f99b80033d0, worker=worker@entry=0x7bd920 <qio_channel_socket_connect_worker>, opaque=0x7f99b8003370, destroy=0x7c6220 <qapi_free_SocketAddress>) at io/task.c:133
#9 0x00000000007bda04 in qio_channel_socket_connect_async (ioc=0x7f99b80014c0, addr=0x37235d0, callback=callback@entry=0x54ad00 <qemu_chr_socket_connected>, opaque=opaque@entry=0x38118b0, destroy=destroy@entry=0x0) at io/channel_socket.c:191
#10 0x00000000005487f6 in socket_reconnect_timeout (opaque=0x38118b0) at qemu_char.c:4402
#11 0x00007f9a6a1533b3 in g_timeout_dispatch () from /usr/lib64/libglib-2.0.so.0
#12 0x00007f9a6a15299a in g_main_context_dispatch () from /usr/lib64/libglib-2.0.so.0
#13 0x0000000000747386 in glib_pollfds_poll () at main_loop.c:227
#14 0x0000000000747424 in os_host_main_loop_wait (timeout=404000000) at main_loop.c:272
#15 0x0000000000747575 in main_loop_wait (nonblocking=nonblocking@entry=0) at main_loop.c:520
#16 0x0000000000557d31 in main_loop () at vl.c:2170
#17 0x000000000041c8b7 in main (argc=<optimized out>, argv=<optimized out>, envp=<optimized out>) at vl.c:5083
Let's detach the new thread after calling qemu_thread_set_name().
Signed-off-by: Caoxinhua <caoxinhua@huawei.com>
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Message-Id: <1483493521-9604-1-git-send-email-zhang.zhanghailiang@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The serial_exit_core function doesn't free some resources.
This can lead memory leak when hotplug and unplug. This
patch avoid this.
Signed-off-by: Li Qiang <liqiang6-s@360.cn>
Message-Id: <586cb5ab.f31d9d0a.38ac3.acf2@mx.google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The direction is wrong; scsi_block_is_passthrough returns
false for commands that *can* use sglists.
Reported-by: Zhang Qian <zhangqian@sangfor.com.cn>
Fixes: 8fdc7839e4
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
'hotplugged' propperty is meant to be used on migration side when migrating
source with hotplugged devices.
However though it not exacly correct usage of 'hotplugged' property
it's possible to set generic hotplugged property for CPU using
-cpu foo,hotplugged=on
or
-global foo.hotplugged=on
in this case qemu crashes with following backtrace:
...
because pc_cpu_plug() assumes that hotplugged CPU could appear only after
rtc/fw_cfg are initialized.
Fix crash by replacing assumption with explicit checks of rtc/fw_cfg
and updating them only if they were initialized.
Cc: qemu-stable@nongnu.org
Reported-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <1483108391-199542-1-git-send-email-imammedo@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Copy the mechanism of hw/smbios/smbios-stub.c to implement an ACPI-stub
instead, so that -acpitable can be later extended to ARM.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Remove the useless is_external argument. Since the iohandler
AioContext is never used for block devices, aio_disable_external
is never called on it. This lets us remove stubs/iohandler.c.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Some stubs are used for user-mode emulation only; they are not
needed by tools. Move them out of stubs/.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
They are small, it is not worth stubbing them. Just include them
in user-mode emulators and unit tests as well.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
monitor_cur_is_qmp was previously used by other stubs, but it's not
since 397d30e ("qemu-error: remove dependency of stubs on monitor",
2016-11-01).
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
-smbios command line options were accepted but silently ignored on
TARGET_ARM, due to a test for TARGET_I386 in arch_init.c.
Copy the mechanism of hw/pci/pci-stub.c to implement an smbios-stub
instead, enabled for all targets without CONFIG_SMBIOS.
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Message-Id: <20161222151828.28292-1-leif.lindholm@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
"qom-list-types abstract=false" currently returns all interface
types, as if they were not abstract. Fix this by making sure all
interface types are abstract.
All interface types have instance_size == 0, so we can use
it to set abstract=true on type_initialize().
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <1481567461-2341-1-git-send-email-ehabkost@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
If the guest sets the sglist size to a value >=2GB, megasas_handle_dcmd
will return MFI_STAT_MEMORY_NOT_AVAILABLE without freeing the memory.
Avoid this by returning only the status from map_dcmd, and loading
cmd->iov_size in the caller.
Reported-by: Li Qiang <liqiang6-s@360.cn>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
reset mc146818rtc device when RESET event happens.
Fix the problem:
1. Guest boot the second cpu, set CMOS_RESET_CODE 0x0a to protect selfboot;
2. VM being reset by others, hmp_system_reset;
3. seabios resume check the CMOS_RESET_CODE, if 0x0a, jump to the BDA
resume execution by jump via 40h:0067h;
4. Guest halt;
Signed-off-by: hangaohuai <hangaohuai@huawei.com>
Message-Id: <20161219060336.10176-1-hangaohuai@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
On 680x0 family only.
Address Register indirect With postincrement:
When using the stack pointer (A7) with byte size data, the register
is incremented by two.
Address Register indirect With predecrement:
When using the stack pointer (A7) with byte size data, the register
is decremented by two.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Thomas Huth <huth@tuxfamily.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Message-Id: <1484332593-16782-6-git-send-email-laurent@vivier.eu>
In these cases we must update the address register after
the operation.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Message-Id: <1484332593-16782-4-git-send-email-laurent@vivier.eu>
gen_flush_flags() is setting unconditionally cc_op_synced to 1
and s->cc_op to CC_OP_FLAGS, whereas env->cc_op can be set
to something else by a previous tcg fragment.
We fix that by not setting cc_op_synced to 1
(except for gen_helper_flush_flags() that updates env->cc_op)
FIX: https://github.com/vivier/qemu-m68k/issues/19
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Message-Id: <1484332593-16782-3-git-send-email-laurent@vivier.eu>
M680x0 bit operations with an immediate value use 9 bits of the 16bit
value, while coldfire ones use only 8 bits.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Message-Id: <1484332593-16782-2-git-send-email-laurent@vivier.eu>
None of the ColdFire boards that we currently support has a PCI or
USB bus (and AFAIK the upcoming q800 machine does not support PCI
and USB either), so we do not need these settings the config file.
Signed-off-by: Thomas Huth <huth@tuxfamily.org>
Message-Id: <20170106083956.53d08923@thl530>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
There were some patterns, like 0x0000_ffff_ffff_00ff, for which we
would select to begin a multi-insn sequence with MOVN, but would
fail to set the 0x0000 lane back from 0xffff.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Message-Id: <20161207180727.6286-3-rth@twiddle.net>
When al == xzr, we cannot use addi/subi because that encodes xsp.
Force a zero into the temp register for that (rare) case.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Message-Id: <20161207180727.6286-2-rth@twiddle.net>
last iteration.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJYd349AAoJEPvQ2wlanipEyl8IAJG48Jp39vWDCDy5YvUoStJ1
dyPFlY6QqyVGVdw5RdtgTNofzHRm8l+xIKfoh+Kfylkzr/6m2Y4ZrBJlflnBAiHc
cUnDWKZm+cgLmpRyUICABkTBw1rPg/blPq9On7Bzmww2dIZdtptT+RYpYlYg+SPQ
sXahhhbNmQsbZU1QtiEvDQomEZQeh80Kk3bQPcB/aYZu0HkhjMDVHsHm7RASD/f6
Ussgl4ILuL+BYjeIjRP3VucmWXtq+OvRkJlcHRqJKzS4qLXFApaI2GaAGdEX02aa
3RGk6laArUck80LSdf1gYxU0PxlDoGtWDrwbv2ykM/aukBuRaHLrpP/GSfv57PA=
=2gvl
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stsquad/tags/pull-travis-20170112-1' into staging
A couple of fixes to reduce the matrix some more that just missed the
last iteration.
# gpg: Signature made Thu 12 Jan 2017 13:01:49 GMT
# gpg: using RSA key 0xFBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>"
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44
* remotes/stsquad/tags/pull-travis-20170112-1:
travis: add Trusty with clang stable build
travis: trim out most clang builds
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Cc: Stefan Weil <sw@weilnetz.de>
Cc: Samuel Thibault <samuel.thibault@gnu.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Message-id: 1484295285-8809-1-git-send-email-kraxel@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The new typename attribute on query-cpu-definitions will be used
to help management software use device-list-properties to check
which properties can be set using -cpu or -global for the CPU
model.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <1479320499-29818-1-git-send-email-ehabkost@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
so it won't impose an additional limits on max_cpus limits
supported by different targets.
It removes global MAX_CPUMASK_BITS constant and need to
bump it up whenever max_cpus is being increased for
a target above MAX_CPUMASK_BITS value.
Use runtime max_cpus value instead to allocate sufficiently
sized node_cpu bitmasks in numa parser.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <1479466974-249781-1-git-send-email-imammedo@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
[ehabkost: Added asserts to ensure cpu_index < max_cpus]
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
In commit c52ab08aee,
the patch snippet for the "syscall" insn got applied to "iret".
Signed-off-by: Doug Evans <dje@google.com>
Message-Id: <f403045cde4049058c05446d5c04@google.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
