KVM vCPU creation is done once during the vCPU realization when Qemu vCPU thread
is spawned. This is common to all the architectures as of now.
Hot-unplug of vCPU results in destruction of the vCPU object in QOM but the
corresponding KVM vCPU object in the Host KVM is not destroyed as KVM doesn't
support vCPU removal. Therefore, its representative KVM vCPU object/context in
Qemu is parked.
Refactor architecture common logic so that some APIs could be reused by vCPU
Hotplug code of some architectures likes ARM, Loongson etc. Update new/old APIs
with trace events. New APIs qemu_{create,park,unpark}_vcpu() can be externally
called. No functional change is intended here.
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Tested-by: Vishnu Pajjuri <vishnu@os.amperecomputing.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Tested-by: Xianglai Li <lixianglai@loongson.cn>
Tested-by: Miguel Luis <miguel.luis@oracle.com>
Reviewed-by: Shaoqin Huang <shahuang@redhat.com>
Reviewed-by: Vishnu Pajjuri <vishnu@os.amperecomputing.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Tested-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20240716111502.202344-2-salil.mehta@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Currently QEMU describes initial[1] RAM* in SMBIOS as a series of
virtual DIMMs (capped at 16Gb max) using type 17 structure entries.
Which is fine for the most cases. However when starting guest
with terabytes of RAM this leads to too many memory device
structures, which eventually upsets linux kernel as it reserves
only 64K for these entries and when that border is crossed out
it runs out of reserved memory.
Instead of partitioning initial RAM on 16Gb DIMMs, use maximum
possible chunk size that SMBIOS spec allows[2]. Which lets
encode RAM in lower 31 bits of 32bit field (which amounts upto
2047Tb per DIMM).
As result initial RAM will generate only one type 17 structure
until host/guest reach ability to use more RAM in the future.
Compat changes:
We can't unconditionally change chunk size as it will break
QEMU<->guest ABI (and migration). Thus introduce a new machine
class field that would let older versioned machines to use
legacy 16Gb chunks, while new(er) machine type[s] use maximum
possible chunk size.
PS:
While it might seem to be risky to rise max entry size this large
(much beyond of what current physical RAM modules support),
I'd not expect it causing much issues, modulo uncovering bugs
in software running within guest. And those should be fixed
on guest side to handle SMBIOS spec properly, especially if
guest is expected to support so huge RAM configs.
In worst case, QEMU can reduce chunk size later if we would
care enough about introducing a workaround for some 'unfixable'
guest OS, either by fixing up the next machine type or
giving users a CLI option to customize it.
1) Initial RAM - is RAM configured with help '-m SIZE' CLI option/
implicitly defined by machine. It doesn't include memory
configured with help of '-device' option[s] (pcdimm,nvdimm,...)
2) SMBIOS 3.1.0 7.18.5 Memory Device — Extended Size
PS:
* tested on 8Tb host with RHEL6 guest, which seems to parse
type 17 SMBIOS table entries correctly (according to 'dmidecode').
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20240715122417.4059293-1-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20240715-sriov-v5-8-3f5539093ffc@daynix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
A virtio-net device can be added as a SR-IOV VF to another virtio-pci
device that will be the PF.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20240715-sriov-v5-7-3f5539093ffc@daynix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Allow user to attach SR-IOV VF to a virtio-pci PF.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20240715-sriov-v5-6-3f5539093ffc@daynix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
A user can create a SR-IOV device by specifying the PF with the
sriov-pf property of the VFs. The VFs must be added before the PF.
A user-creatable VF must have PCIDeviceClass::sriov_vf_user_creatable
set. Such a VF cannot refer to the PF because it is created before the
PF.
A PF that user-creatable VFs can be attached calls
pcie_sriov_pf_init_from_user_created_vfs() during realization and
pcie_sriov_pf_exit() when exiting.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20240715-sriov-v5-5-3f5539093ffc@daynix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
SR-IOV requires PCI Express.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20240715-sriov-v5-4-3f5539093ffc@daynix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
A device cannot be a SR-IOV PF and a VF at the same time.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20240715-sriov-v5-3-3f5539093ffc@daynix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
pci_config_get_bar_addr() had a division by vf_stride. vf_stride needs
to be non-zero when there are multiple VFs, but the specification does
not prohibit to make it zero when there is only one VF.
Do not perform the division for the first VF to avoid division by zero.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20240715-sriov-v5-2-3f5539093ffc@daynix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Coverity reported:
>>> CID 1549454: Integer handling issues (OVERFLOW_BEFORE_WIDEN)
>>> Potentially overflowing expression
"le32_to_cpu(desc->num_sectors) << 9" with type "uint32_t"
(32 bits, unsigned) is evaluated using 32-bit arithmetic, and
then used in a context that expects an expression of type
"uint64_t" (64 bits, unsigned).
199 le32_to_cpu(desc->num_sectors) << 9 };
Coverity noticed this issue after commit ab04420c3 ("contrib/vhost-user-*:
use QEMU bswap helper functions"), but it was pre-existing and introduced
from the beginning by commit caa1ee4313 ("vhost-user-blk: add
discard/write zeroes features support").
Explicitly cast the 32-bit value before the shift to fix this issue.
Fixes: Coverity CID 1549454
Fixes: 5ab04420c3 ("contrib/vhost-user-*: use QEMU bswap helper functions")
Fixes: caa1ee4313 ("vhost-user-blk: add discard/write zeroes features support")
Cc: changpeng.liu@intel.com
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <20240712153857.207440-1-sgarzare@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Extend the virtio device property definitions to include the
VIRTIO_F_IN_ORDER feature.
The default state of this feature is disabled, allowing it to be
explicitly enabled where it's supported.
Acked-by: Eugenio Pérez <eperezma@redhat.com>
Signed-off-by: Jonah Palmer <jonah.palmer@oracle.com>
Message-Id: <20240710125522.4168043-7-jonah.palmer@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add support for the VIRTIO_F_IN_ORDER feature across a variety of vhost
devices.
The inclusion of VIRTIO_F_IN_ORDER in the feature bits arrays for these
devices ensures that the backend is capable of offering and providing
support for this feature, and that it can be disabled if the backend
does not support it.
Acked-by: Eugenio Pérez <eperezma@redhat.com>
Signed-off-by: Jonah Palmer <jonah.palmer@oracle.com>
Message-Id: <20240710125522.4168043-6-jonah.palmer@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add VIRTIO_F_IN_ORDER feature support for the virtqueue_flush operation.
The goal of the virtqueue_ordered_flush operation when the
VIRTIO_F_IN_ORDER feature has been negotiated is to write elements to
the used/descriptor ring in-order and then update used_idx.
The function iterates through the VirtQueueElement used_elems array
in-order starting at vq->used_idx. If the element is valid (filled), the
element is written to the used/descriptor ring. This process continues
until we find an invalid (not filled) element.
For packed VQs, the first entry (at vq->used_idx) is written to the
descriptor ring last so the guest doesn't see any invalid descriptors.
If any elements were written, the used_idx is updated.
Signed-off-by: Jonah Palmer <jonah.palmer@oracle.com>
Message-Id: <20240710125522.4168043-5-jonah.palmer@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Eugenio Pérez <eperezma@redhat.com>
Add VIRTIO_F_IN_ORDER feature support for the virtqueue_fill operation.
The goal of the virtqueue_ordered_fill operation when the
VIRTIO_F_IN_ORDER feature has been negotiated is to search for this
now-used element, set its length, and mark the element as filled in
the VirtQueue's used_elems array.
By marking the element as filled, it will indicate that this element has
been processed and is ready to be flushed, so long as the element is
in-order.
Reviewed-by: Eugenio Pérez <eperezma@redhat.com>
Signed-off-by: Jonah Palmer <jonah.palmer@oracle.com>
Message-Id: <20240710125522.4168043-4-jonah.palmer@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add VIRTIO_F_IN_ORDER feature support in virtqueue_split_pop and
virtqueue_packed_pop.
VirtQueueElements popped from the available/descritpor ring are added to
the VirtQueue's used_elems array in-order and in the same fashion as
they would be added the used and descriptor rings, respectively.
This will allow us to keep track of the current order, what elements
have been written, as well as an element's essential data after being
processed.
Reviewed-by: Eugenio Pérez <eperezma@redhat.com>
Signed-off-by: Jonah Palmer <jonah.palmer@oracle.com>
Message-Id: <20240710125522.4168043-3-jonah.palmer@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add the boolean 'in_order_filled' member to the VirtQueueElement structure.
The use of this boolean will signify whether the element has been processed
and is ready to be flushed (so long as the element is in-order). This
boolean is used to support the VIRTIO_F_IN_ORDER feature.
Reviewed-by: Eugenio Pérez <eperezma@redhat.com>
Signed-off-by: Jonah Palmer <jonah.palmer@oracle.com>
Message-Id: <20240710125522.4168043-2-jonah.palmer@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The 'level' field in vtd_iotlb_key is an unsigned integer.
We don't need to store level as an int in vtd_lookup_iotlb.
This is not an issue by itself, but using unsigned here seems cleaner.
Signed-off-by: Clément Mathieu--Drif <clement.mathieu--drif@eviden.com>
Reviewed-by: Yi Liu <yi.l.liu@intel.com>
Message-Id: <20240709142557.317271-5-clement.mathieu--drif@eviden.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Per the below code, it can overflow as am can be larger than 8 according
to the CH 6.5.2.3 IOTLB Invalidate. Use uint64_t to avoid overflows.
Fixes: b5a280c008 ("intel-iommu: add IOTLB using hash table")
Signed-off-by: Clément Mathieu--Drif <clement.mathieu--drif@eviden.com>
Reviewed-by: Minwoo Im <minwoo.im@samsung.com>
Reviewed-by: Yi Liu <yi.l.liu@intel.com>
Message-Id: <20240709142557.317271-4-clement.mathieu--drif@eviden.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
These 2 macros are for high 64-bit of the FRCD registers.
Declarations have to be moved accordingly.
Signed-off-by: Clément Mathieu--Drif <clement.mathieu--drif@eviden.com>
Reviewed-by: Minwoo Im <minwoo.im@samsung.com>
Reviewed-by: Yi Liu <yi.l.liu@intel.com>
Message-Id: <20240709142557.317271-3-clement.mathieu--drif@eviden.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The constant must be unsigned, otherwise the two's complement
overrides the other fields when a PASID is present.
Fixes: 1b2b12376c ("intel-iommu: PASID support")
Signed-off-by: Clément Mathieu--Drif <clement.mathieu--drif@eviden.com>
Reviewed-by: Yi Liu <yi.l.liu@intel.com>
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Minwoo Im <minwoo.im@samsung.com>
Message-Id: <20240709142557.317271-2-clement.mathieu--drif@eviden.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
When setting the parameters of a PCM stream, we compute the bit flag
with the format and rate values as shift operand to check if they are
set in supported_formats and supported_rates.
If the guest provides a format/rate value which when shifting 1 results
in a value bigger than the number of bits in
supported_formats/supported_rates, we must report an error.
Previously, this ended up triggering the not reached assertions later
when converting to internal QEMU values.
Reported-by: Zheyu Ma <zheyuma97@gmail.com>
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2416
Signed-off-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Message-Id: <virtio-snd-fuzz-2416-fix-v1-manos.pitsidianakis@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
When reading input audio in the virtio-snd input callback,
virtio_snd_pcm_in_cb(), we do not check whether the iov can actually fit
the data buffer. This is because we use the buffer->size field as a
total-so-far accumulator instead of byte-size-left like in TX buffers.
This triggers an out of bounds write if the size of the virtio queue
element is equal to virtio_snd_pcm_status, which makes the available
space for audio data zero. This commit adds a check for reaching the
maximum buffer size before attempting any writes.
Reported-by: Zheyu Ma <zheyuma97@gmail.com>
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2427
Signed-off-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Message-Id: <virtio-snd-fuzz-2427-fix-v1-manos.pitsidianakis@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Message-Id: <20240708032112.796339-1-yi.l.liu@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Implement transfer and activate functionality per 3.1 spec for
supporting update metadata (no actual buffers). Transfer times
are arbitrarily set to ten and two seconds for full and part
transfers, respectively.
cxl update-firmware mem0 -F fw.img
<on-going fw update>
cxl update-firmware mem0
"memdev":"mem0",
"pmem_size":"1024.00 MiB (1073.74 MB)",
"serial":"0",
"host":"0000:0d:00.0",
"firmware":{
"num_slots":2,
"active_slot":1,
"online_activate_capable":true,
"slot_1_version":"BWFW VERSION 0",
"fw_update_in_progress":true,
"remaining_size":22400
}
}
<completed fw update>
cxl update-firmware mem0
{
"memdev":"mem0",
"pmem_size":"1024.00 MiB (1073.74 MB)",
"serial":"0",
"host":"0000:0d:00.0",
"firmware":{
"num_slots":2,
"active_slot":1,
"staged_slot":2,
"online_activate_capable":true,
"slot_1_version":"BWFW VERSION 0",
"slot_2_version":"BWFW VERSION 1",
"fw_update_in_progress":false
}
}
Signed-off-by: Davidlohr Bueso <dave@stgolabs.net>
Link: https://lore.kernel.org/r/20240627164912.25630-1-dave@stgolabs.net
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20240705125915.991672-2-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
CXL spec 3.1 section 8.2.9.9.11.2 describes the DDR5 Error Check Scrub (ECS)
control feature.
The Error Check Scrub (ECS) is a feature defined in JEDEC DDR5 SDRAM
Specification (JESD79-5) and allows the DRAM to internally read, correct
single-bit errors, and write back corrected data bits to the DRAM array
while providing transparency to error counts. The ECS control feature
allows the request to configure ECS input configurations during system
boot or at run-time.
The ECS control allows the requester to change the log entry type, the ECS
threshold count provided that the request is within the definition
specified in DDR5 mode registers, change mode between codeword mode and
row count mode, and reset the ECS counter.
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Reviewed-by: Fan Ni <fan.ni@samsung.com>
Signed-off-by: Shiju Jose <shiju.jose@huawei.com>
Link: https://lore.kernel.org/r/20240223085902.1549-4-shiju.jose@huawei.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20240705123039.963781-5-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
CXL spec 3.1 section 8.2.9.9.11.1 describes the device patrol scrub control
feature. The device patrol scrub proactively locates and makes corrections
to errors in regular cycle. The patrol scrub control allows the request to
configure patrol scrub input configurations.
The patrol scrub control allows the requester to specify the number of
hours for which the patrol scrub cycles must be completed, provided that
the requested number is not less than the minimum number of hours for the
patrol scrub cycle that the device is capable of. In addition, the patrol
scrub controls allow the host to disable and enable the feature in case
disabling of the feature is needed for other purposes such as
performance-aware operations which require the background operations to be
turned off.
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Reviewed-by: Fan Ni <fan.ni@samsung.com>
Signed-off-by: Shiju Jose <shiju.jose@huawei.com>
Link: https://lore.kernel.org/r/20240223085902.1549-3-shiju.jose@huawei.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20240705123039.963781-4-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
CXL spec 3.1 section 8.2.9.6 describes optional device specific features.
CXL devices supports features with changeable attributes.
Get Supported Features retrieves the list of supported device specific
features. The settings of a feature can be retrieved using Get Feature and
optionally modified using Set Feature.
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Reviewed-by: Fan Ni <fan.ni@samsung.com>
Signed-off-by: Shiju Jose <shiju.jose@huawei.com>
Link: https://lore.kernel.org/r/20240223085902.1549-2-shiju.jose@huawei.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20240705123039.963781-3-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Preparation for allowing devices to define their own CCI commands
Signed-off-by: Gregory Price <gregory.price@memverge.com>
Link: https://lore.kernel.org/r/20230906001517.324380-2-gregory.price@memverge.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20240705123039.963781-2-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Iterate over the list keeping the output payload size into account,
returning the results from a previous scan media operation. The
scan media operation does not fail prematurely due to device being
out of storage, so this implementation does not deal with the
retry/restart functionality.
Signed-off-by: Davidlohr Bueso <dave@stgolabs.net>
Link: https://lore.kernel.org/r/20230908073152.4386-5-dave@stgolabs.net
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20240705120643.959422-5-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Per CXL r3.1 Section 8.2.9.9.5.1: Sanitize (Opcode 4400h), the
sanitize command should delete all event logs. Introduce
cxl_discard_all_event_logs() and call
this in __do_sanitization().
Signed-off-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Link: https://lore.kernel.org/r/20231222090051.3265307-5-42.hyeyoo@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20240705120643.959422-4-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The spec states that reads/writes should have no effect and a part of
commands should be ignored when the media is disabled, not when the
sanitize command is running.
Introduce cxl_dev_media_disabled() to check if the media is disabled and
replace sanitize_running() with it.
Make sure that the media has been correctly disabled during sanitation
by adding an assert to __toggle_media(). Now, enabling when already
enabled or vice versa results in an assert() failure.
Suggested-by: Davidlohr Bueso <dave@stgolabs.net>
Signed-off-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Link: https://lore.kernel.org/r/20231222090051.3265307-4-42.hyeyoo@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20240705120643.959422-3-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Use simple heuristics to determine the cost of scanning any given
chunk, assuming cost is equal across the whole device, without
differentiating between volatile or persistent partitions. This
is aligned to the fact that these constraints are not enforced
in respective poison query commands.
Signed-off-by: Davidlohr Bueso <dave@stgolabs.net>
Link: https://lore.kernel.org/r/20230908073152.4386-3-dave@stgolabs.net
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20240705120643.959422-2-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
QEMU crashes (Segmentation fault) when getting cxl-fmw property via
qmp:
(QEMU) qom-get path=machine property=cxl-fmw
This issue is caused by accessing wrong callback (opaque) type in
machine_get_cfmw().
cxl_machine_init() sets the callback as `CXLState *` type but
machine_get_cfmw() treats the callback as
`CXLFixedMemoryWindowOptionsList **`.
Fix this error by casting opaque to `CXLState *` type in
machine_get_cfmw().
Fixes: 03b39fcf64 ("hw/cxl: Make the CXL fixed memory window setup a machine parameter.")
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Li Zhijian <lizhijian@fujitsu.com>
Reviewed-by: Xingtao Yao <yaoxt.fnst@fujitsu.com>
Link: https://lore.kernel.org/r/20240704093404.1848132-1-zhao1.liu@linux.intel.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20240705113956.941732-2-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Similar protection to that provided for -numa memdev=x
to make sure that memory used to back a type3 device is not also mapped
as normal RAM, or for multiple type3 devices.
This is an easy footgun to remove and seems multiple people have
run into it.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20240705113956.941732-4-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
I have recently been working on supporting vhost-user on any POSIX,
so I want to help maintain it.
Cc: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <20240704081336.21208-1-sgarzare@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Currently, if the function fails during the key_len check, the op_code
does not have a proper value, causing virtio_crypto_free_create_session_req
not to free the memory correctly, leading to a memory leak.
By setting the op_code before performing any checks, we ensure that
virtio_crypto_free_create_session_req has the correct context to
perform cleanup operations properly, thus preventing memory leaks.
ASAN log:
==3055068==ERROR: LeakSanitizer: detected memory leaks
Direct leak of 512 byte(s) in 1 object(s) allocated from:
#0 0x5586a75e6ddd in malloc llvm/compiler-rt/lib/asan/asan_malloc_linux.cpp:129:3
#1 0x7fb6b63b6738 in g_malloc (/lib/x86_64-linux-gnu/libglib-2.0.so.0+0x5e738)
#2 0x5586a864bbde in virtio_crypto_handle_ctrl hw/virtio/virtio-crypto.c:407:19
#3 0x5586a94fc84c in virtio_queue_notify_vq hw/virtio/virtio.c:2277:9
#4 0x5586a94fc0a2 in virtio_queue_host_notifier_read hw/virtio/virtio.c:3641:9
Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
Message-Id: <20240702211835.3064505-1-zheyuma97@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
loongarch added a common library for edk2 to
parse flash base addresses through fdt.
For compatibility with other architectures,
the flash block size in qemu is now changed to 256k.
Signed-off-by: Xianglai Li <lixianglai@loongson.cn>
Reviewed-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20240624033319.999631-1-lixianglai@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Remove extioi INT_encode encode mode, because we don't emulate it.
Signed-off-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Message-Id: <20240718083254.748179-1-gaosong@loongson.cn>
GDB already support LoongArch vector extension[1], QEMU gdb adds
LoongArch vector registers support, so that users can use 'info all-registers'
to get all vector registers values.
[1]: https://sourceware.org/git/?p=binutils-gdb.git;a=commitdiff;h=1e9569f383a3d5a88ee07d0c2401bd95613c222e
Signed-off-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewd-by: Bibo Mao <maobibo@loongson.cn>
Message-Id: <20240711024454.3075183-1-gaosong@loongson.cn>
* Fix handling of LDAPR/STLR with negative offset
* LDAPR should honour SCTLR_ELx.nAA
* Use float_status copy in sme_fmopa_s
* hw/display/bcm2835_fb: fix fb_use_offsets condition
* hw/arm/smmuv3: Support and advertise nesting
* Use FPST_F16 for SME FMOPA (widening)
* tests/arm-cpu-features: Do not assume PMU availability
* hvf: arm: Do not advance PC when raising an exception
-----BEGIN PGP SIGNATURE-----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=/aEm
-----END PGP SIGNATURE-----
Merge tag 'pull-target-arm-20240718' of https://git.linaro.org/people/pmaydell/qemu-arm into staging
target-arm queue:
* Fix handling of LDAPR/STLR with negative offset
* LDAPR should honour SCTLR_ELx.nAA
* Use float_status copy in sme_fmopa_s
* hw/display/bcm2835_fb: fix fb_use_offsets condition
* hw/arm/smmuv3: Support and advertise nesting
* Use FPST_F16 for SME FMOPA (widening)
* tests/arm-cpu-features: Do not assume PMU availability
* hvf: arm: Do not advance PC when raising an exception
# -----BEGIN PGP SIGNATURE-----
#
# iQJNBAABCAA3FiEE4aXFk81BneKOgxXPPCUl7RQ2DN4FAmaZFlUZHHBldGVyLm1h
# eWRlbGxAbGluYXJvLm9yZwAKCRA8JSXtFDYM3iJuEACtVh1Wp93XMsL3llAZkQlx
# DUCnDCvAM2qiiTIMOqPQzeKTIkRV9aFh1YWzOtMFKai6UkBU6p1b4bPqb5SIr99G
# Ayps4+WzAHsjTqBGEpIIDWL6GqMwv9azBnRAYNb+Cg9O3SzEnCdGOKCfGYTXXPRz
# zQ1NIgqZSUC5jg3XgkU22J3VMsOUWijbzxnGXhOyemSIEhREl+t6Ns3ca3n47/jk
# JIw1g6o0mpefPPkaLq6ftVwpn1L63iYQugn4VCrIhtIoOM8vmnShbI9/GwzL4AYk
# n28nwPl948Xby13kCYmu6Slt8Rmm7M33pBDJzsVtbaeBSd44XHrov8Y1+e1FhAco
# lxrWY/2rG9HiWKGLdAeCKwVxB186DKiTmuK7lcN+eBu3VbOLjDiVE0d1bK4HqGyc
# nzA/Aq81Y9p5Z7wzX40sVFlq0j1pQDQWk6GgPfMA4ueHKEEobxC3C+k1q9m02gjQ
# qesOFzViiGe0j7JER84qqcatIaTk09xfbXL/uMZx8oP/iKa1pyMUx2blChXOXVTx
# oGkO2h3/QCpRIos8d8WM/bso16EkpraInM4748iumSLuxDxTwiIikK/hpsCLDwUN
# dLsH/hAMz+yQOFubFoRt4IlsGVnk5asmTDMb4S8RojdF2KzHuzbJMgdEOe62631g
# IOAc7Tn3TIm5MpAxXOXgJA==
# =/aEm
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 18 Jul 2024 11:19:17 PM AEST
# gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [full]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [full]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [full]
# gpg: aka "Peter Maydell <peter@archaic.org.uk>" [unknown]
* tag 'pull-target-arm-20240718' of https://git.linaro.org/people/pmaydell/qemu-arm: (26 commits)
hvf: arm: Do not advance PC when raising an exception
tests/arm-cpu-features: Do not assume PMU availability
tests/tcg/aarch64: Add test cases for SME FMOPA (widening)
target/arm: Use FPST_F16 for SME FMOPA (widening)
target/arm: Use float_status copy in sme_fmopa_s
hw/arm/smmu: Refactor SMMU OAS
hw/arm/smmuv3: Support and advertise nesting
hw/arm/smmuv3: Handle translation faults according to SMMUPTWEventInfo
hw/arm/smmuv3: Support nested SMMUs in smmuv3_notify_iova()
hw/arm/smmu: Support nesting in the rest of commands
hw/arm/smmu: Introduce smmu_iotlb_inv_asid_vmid
hw/arm/smmu: Support nesting in smmuv3_range_inval()
hw/arm/smmu-common: Support nested translation
hw/arm/smmu-common: Add support for nested TLB
hw/arm/smmu-common: Rework TLB lookup for nesting
hw/arm/smmuv3: Translate CD and TT using stage-2 table
hw/arm/smmu: Introduce CACHED_ENTRY_TO_ADDR
hw/arm/smmu: Consolidate ASID and VMID types
hw/arm/smmu: Split smmuv3_translate()
hw/arm/smmu: Use enum for SMMU stage
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
hvf did not advance PC when raising an exception for most unhandled
system registers, but it mistakenly advanced PC when raising an
exception for GICv3 registers.
Cc: qemu-stable@nongnu.org
Fixes: a2260983c6 ("hvf: arm: Add support for GICv3")
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-id: 20240716-pmu-v3-4-8c7c1858a227@daynix.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Daniyal Khan <danikhan632@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20240717060149.204788-4-richard.henderson@linaro.org
Message-Id: 172090222034.13953.16888708708822922098-1@git.sr.ht
[rth: Split test from a larger patch, tidy assembly]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This operation has float16 inputs and thus must use
the FZ16 control not the FZ control.
Cc: qemu-stable@nongnu.org
Fixes: 3916841ac7 ("target/arm: Implement FMOPA, FMOPS (widening)")
Reported-by: Daniyal Khan <danikhan632@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20240717060149.204788-3-richard.henderson@linaro.org
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2374
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We made a copy above because the fp exception flags
are not propagated back to the FPST register, but
then failed to use the copy.
Cc: qemu-stable@nongnu.org
Fixes: 558e956c71 ("target/arm: Implement FMOPA, FMOPS (non-widening)")
Signed-off-by: Daniyal Khan <danikhan632@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20240717060149.204788-2-richard.henderson@linaro.org
[rth: Split from a larger patch]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
SMMUv3 OAS is currently hardcoded in the code to 44 bits, for nested
configurations that can be a problem, as stage-2 might be shared with
the CPU which might have different PARANGE, and according to SMMU manual
ARM IHI 0070F.b:
6.3.6 SMMU_IDR5, OAS must match the system physical address size.
This patch doesn't change the SMMU OAS, but refactors the code to
make it easier to do that:
- Rely everywhere on IDR5 for reading OAS instead of using the
SMMU_IDR5_OAS macro, so, it is easier just to change IDR5 and
it propagages correctly.
- Add additional checks when OAS is greater than 48bits.
- Remove unused functions/macros: pa_range/MAX_PA.
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Mostafa Saleh <smostafa@google.com>
Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20240715084519.1189624-19-smostafa@google.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Everything is in place, consolidate parsing of STE cfg and setting
translation stage.
Advertise nesting if stage requested is "nested".
Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Mostafa Saleh <smostafa@google.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20240715084519.1189624-18-smostafa@google.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Previously, to check if faults are enabled, it was sufficient to check
the current stage of translation and check the corresponding
record_faults flag.
However, with nesting, it is possible for stage-1 (nested) translation
to trigger a stage-2 fault, so we check SMMUPTWEventInfo as it would
have the correct stage set from the page table walk.
Signed-off-by: Mostafa Saleh <smostafa@google.com>
Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20240715084519.1189624-17-smostafa@google.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
