Commit Graph

72 Commits

Author SHA1 Message Date
Richard Henderson
b597eedcce target/sparc: Remove CC_OP leftovers
All instructions have been converted to generate
full condition codes explicitly.

Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-11-05 12:03:17 -08:00
Richard Henderson
68524e83f8 target/sparc: Remove CC_OP_TADDTV, CC_OP_TSUBTV
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-11-05 12:03:14 -08:00
Richard Henderson
f828df7443 target/sparc: Remove CC_OP_SUB, CC_OP_SUBX, CC_OP_TSUB
These are all related and implementable with common code.

Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-11-05 12:03:11 -08:00
Richard Henderson
b989ce736e target/sparc: Remove CC_OP_ADD, CC_OP_ADDX, CC_OP_TADD
These are all related and implementable with common code.

Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-11-05 12:02:59 -08:00
Richard Henderson
1326010322 target/sparc: Remove CC_OP_DIV
Return both result and overflow from helper_[us]div.
Compute all flags explicitly in gen_op_[us]divcc.

Marginally improve the INT64_MIN special case in helper_sdiv.

Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-11-05 11:53:36 -08:00
Richard Henderson
2a45b73658 target/sparc: Remove CC_OP_LOGIC
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-11-05 11:53:32 -08:00
Richard Henderson
2a1905c79e target/sparc: Split psr and xcc into components
Step in removing CC_OP: change the representation of CC_OP_FLAGS.
The 8 bits are distributed between 6 variables, which should make
it easy to keep up to date.

The code within cc_helper.c is quite ugly but is only temporary.

Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-11-05 11:53:13 -08:00
Richard Henderson
b1fa27fcc8 target/sparc: Introduce cpu_put_psr_icc
Isolate linux-user from changes to icc representation.

Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-11-05 11:52:18 -08:00
Richard Henderson
5f25b383a8 target/sparc: Remove sparcv7 cpu features
The oldest supported cpu is the microsparc 1; all other cpus
use CPU_DEFAULT_FEATURES.  Remove the features that must always
be present for sparcv7: FLOAT, SWAP, FLUSH, FSQRT, FMUL.

Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-10-25 01:01:12 -07:00
Richard Henderson
bd7ff659a7 target/sparc: Define features via cpu-feature.h.inc
Manage feature bits automatically.

Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-10-25 01:01:12 -07:00
Richard Henderson
e0f46055a1 target/sparc: Set TCG_GUEST_DEFAULT_MO
Always use TSO, per the Oracle 2015 manual.
This is slightly less restrictive than the TCG_MO_ALL default,
and happens to match the i386 model, which will eliminate a few
extra barriers on that host.

Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-10-25 01:01:12 -07:00
Richard Henderson
3b3d7df545 accel/tcg: Move CPUNegativeOffsetState into CPUState
Retain the separate structure to emphasize its importance.
Enforce CPUArchState always follows CPUState without padding.

Reviewed-by: Anton Johansson <anjo@rev.ng>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-10-03 08:01:02 -07:00
Peter Maydell
ca4d5d862d target/sparc: Handle FPRS correctly on big-endian hosts
In CPUSparcState we define the fprs field as uint64_t.  However we
then refer to it in translate.c via a TCGv_i32 which we set up with
tcg_global_mem_new_ptr().  This means that on a big-endian host when
the guest does something to writo te the FPRS register this value
ends up in the wrong half of the uint64_t, and the QEMU C code that
refers to env->fprs sees the wrong value.  The effect of this is that
guest code that enables the FPU crashes with spurious FPU Disabled
exceptions.  In particular, this is why
 tests/avocado/machine_sparc64_sun4u.py:Sun4uMachine.test_sparc64_sun4u
times out on an s390 host.

There are multiple ways we could fix this; since there are actually
only three bits in the FPRS register and the code in translate.c
would be a bit painful to convert to dealing with a TCGv_i64, change
the type of the CPU state struct field to match what translate.c is
expecting.

(None of the other fields referenced by the r32[] array in
sparc_tcg_init() have the wrong type.)

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20230717103544.637453-1-peter.maydell@linaro.org>
2023-07-25 14:42:00 +02:00
Anton Johansson
bb5de52524 target: Widen pc/cs_base in cpu_get_tb_cpu_state
Signed-off-by: Anton Johansson <anjo@rev.ng>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230621135633.1649-4-anjo@rev.ng>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-06-26 17:32:59 +02:00
Richard Henderson
0a18945d03 tcg: Remove NO_CPU_IO_DEFS
From this remove, it's no longer clear what this is attempting
to protect.  The last time a use of this define was added to
the source tree, as opposed to merely moved around, was 2008.
There have been many cleanups since that time and this is
no longer required for the build to succeed.

Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-06-05 12:04:29 -07:00
Richard Henderson
4ea3af392f linux-user/sparc: Handle floating-point exceptions
Raise SIGFPE for ieee exceptions.

The other types, such as FSR_FTT_UNIMPFPOP, should not appear,
because we enable normal emulation of missing insns at the
start of sparc_cpu_realizefn().

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230216054516.1267305-15-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2023-03-10 20:45:47 +01:00
Philippe Mathieu-Daudé
6d2d454a88 target/cpu: Restrict cpu_get_phys_page_debug() handlers to sysemu
The 'hwaddr' type is only available / meaningful on system emulation.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221216215519.5522-5-philmd@linaro.org>
2023-02-27 22:29:01 +01:00
Richard Henderson
f36aaa53c6 target/sparc: Convert to tcg_ops restore_state_to_opc
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2022-10-26 11:11:28 +10:00
Marc-André Lureau
8905770b27 compiler.h: replace QEMU_NORETURN with G_NORETURN
G_NORETURN was introduced in glib 2.68, fallback to G_GNUC_NORETURN in
glib-compat.

Note that this attribute must be placed before the function declaration
(bringing a bit of consistency in qemu codebase usage).

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Warner Losh <imp@bsdimp.com>
Message-Id: <20220420132624.2439741-20-marcandre.lureau@redhat.com>
2022-04-21 17:03:51 +04:00
Marc-André Lureau
69242e7e7e Move CPU softfloat unions to cpu-float.h
The types are no longer used in bswap.h since commit
f930224fff ("bswap.h: Remove unused float-access functions"), there
isn't much sense in keeping it there and having a dependency on fpu/.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20220323155743.1585078-29-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-04-06 14:31:43 +02:00
Philippe Mathieu-Daudé
b36e239e08 target: Use ArchCPU as interface to target CPU
ArchCPU is our interface with target-specific code. Use it as
a forward-declared opaque pointer (abstract type), having its
structure defined by each target.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220214183144.27402-15-f4bug@amsat.org>
2022-03-06 22:23:09 +01:00
Philippe Mathieu-Daudé
9295b1aa92 target: Introduce and use OBJECT_DECLARE_CPU_TYPE() macro
Replace the boilerplate code to declare CPU QOM types
and macros, and forward-declare the CPU instance type.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220214183144.27402-14-f4bug@amsat.org>
2022-03-06 22:23:09 +01:00
Philippe Mathieu-Daudé
1ea4a06af0 target: Use CPUArchState as interface to target-specific CPU state
While CPUState is our interface with generic code, CPUArchState is
our interface with target-specific code. Use CPUArchState as an
abstract type, defined by each target.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220214183144.27402-13-f4bug@amsat.org>
2022-03-06 22:23:09 +01:00
Richard Henderson
8b1d5b3c35 include/exec: Move cpu_signal_handler declaration
There is nothing target specific about this.  The implementation
is host specific, but the declaration is 100% common.

Reviewed-By: Warner Losh <imp@bsdimp.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2021-09-21 19:36:44 -07:00
Philippe Mathieu-Daudé
9ac200acce target/sparc: Make sparc_cpu_dump_state() static
The sparc_cpu_dump_state() function is only called within
the same file. Make it static.

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20210916084002.1918445-1-f4bug@amsat.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-09-16 14:52:46 +02:00
Philippe Mathieu-Daudé
1284119991 hw/sparc: Allow building without the leon3 machine
When building without the leon3 machine, we get this link failure:

  /usr/bin/ld: target_sparc_int32_helper.c.o: in function `leon3_irq_manager':
  target/sparc/int32_helper.c:172: undefined reference to `leon3_irq_ack'

This is because the leon3_irq_ack() is declared in hw/sparc/leon3.c,
which is only build when CONFIG_LEON3 is selected.

Fix by moving the leon3_cache_control_int() / leon3_irq_manager()
(which are specific to the leon3 machine) to hw/sparc/leon3.c.
Move the trace events along (but don't rename them).

leon3_irq_ack() is now locally used, declare it static to reduce
its scope.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: KONRAD Frederic <frederic.konrad@adacore.com>
Tested-by: KONRAD Frederic <frederic.konrad@adacore.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20210428141655.387430-2-f4bug@amsat.org>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
2021-05-04 22:45:53 +01:00
Peter Maydell
7a5805a08f linux-user/sparc: Handle tstate in sparc64_get/set_context()
Correctly implement save/restore of the tstate field in
sparc64_get_context() and sparc64_set_context():
 * Don't use the CWP value from the guest in set_context
 * Construct and save a tstate value rather than leaving
   it as zero in get_context

To do this we factor out the "calculate TSTATE value from CPU state"
code from sparc_cpu_do_interrupt() into its own sparc64_tstate()
function; that in turn requires us to move some of the function
prototypes out from inside a CPU_NO_IO_DEFS ifdef guard.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20201106152738.26026-5-peter.maydell@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2020-12-18 11:23:29 +01:00
Peter Maydell
246ff44295 linux-user/sparc: Correct sparc64_get/set_context() FPU handling
The handling of the FPU state in sparc64_get_context() and
sparc64_set_context() is not the same as what the kernel actually
does: we unconditionally read and write the FP registers and the
FSR, GSR and FPRS, but the kernel logic is more complicated:
 * in get_context the kernel has code for saving FPU registers,
   but it is hidden inside an "if (fenab) condition and the
   fenab flag is always set to 0 (inside an "#if 1" which has
   been in the kernel for over 15 years). So the effect is that
   the FPU state part is always written as zeroes.
 * in set_context the kernel looks at the fenab field in the
   structure from the guest, and only restores the state if
   it is set; it also looks at the structure's FPRS to see
   whether either the upper or lower or both halves of the
   register file have valid data.

Bring our implementations into line with the kernel:
 * in get_context:
    - clear the entire target_ucontext at the top of the
      function (as the kernel does)
    - then don't write the FPU state, so those fields remain zero
    - this fixes Coverity issue CID 1432305 by deleting the code
      it was complaining about
 * in set_context:
    - check the fenab and the fpsr to decide which parts of
      the FPU data to restore, if any
    - instead of setting the FPU registers by doing two
      32-bit loads and filling in the .upper and .lower parts
      of the CPU_Double union separately, just do a 64-bit
      load of the whole register at once. This fixes Coverity
      issue CID 1432303 because we now access the dregs[] part
      of the mcfpu_fregs union rather than the sregs[] part
      (which is not large enough to actually cover the whole of
      the data, so we were accessing off the end of sregs[])

We change both functions in a single commit to avoid potentially
breaking bisection.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20201106152738.26026-2-peter.maydell@linaro.org>
[lv: fix FPRS_DU loop s/31/32/]
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2020-12-18 11:23:29 +01:00
Alex Bennée
a010bdbe71 gdbstub: extend GByteArray to read register helpers
Instead of passing a pointer to memory now just extend the GByteArray
to all the read register helpers. They can then safely append their
data through the normal way. We don't bother with this abstraction for
write registers as we have already ensured the buffer being copied
from is the correct size.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Damien Hedde <damien.hedde@greensocs.com>

Message-Id: <20200316172155.971-15-alex.bennee@linaro.org>
2020-03-17 17:38:38 +00:00
Richard Henderson
f8a745974d target/sparc: Define an enumeration for accessing env->regwptr
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20191106113318.10226-4-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2019-11-06 13:35:25 +01:00
Peter Maydell
f8c3db33a5 target/sparc: Switch to do_transaction_failed() hook
Switch the SPARC target from the old unassigned_access hook to the
new do_transaction_failed hook.

This will cause the "if transaction failed" code paths added in
the previous commits to become active if the access is to an
unassigned address. In particular we'll now handle bus errors
during page table walks correctly (generating a translation
error with the right kind of fault status).

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-id: 20190801183012.17564-8-peter.maydell@linaro.org
2019-09-17 12:01:00 +01:00
Tony Nguyen
ccdb4c5535 target/sparc: sun4u Invert Endian TTE bit
This bit configures endianness of PCI MMIO devices. It is used by
Solaris and OpenBSD sunhme drivers.

Tested working on OpenBSD.

Unfortunately Solaris 10 had a unrelated keyboard issue blocking
testing... another inch towards Solaris 10 on SPARC64 =)

Signed-off-by: Tony Nguyen <tony.nguyen@bt.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <3c8d5181a584f1b3712d3d8d66801b13cecb4b88.1566466906.git.tony.nguyen@bt.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-09-03 08:30:39 -07:00
tony.nguyen@bt.com
52bf9771fd configure: Define target access alignment in configure
This patch moves the define of target access alignment earlier from
target/foo/cpu.h to configure.

Suggested in Richard Henderson's reply to "[PATCH 1/4] tcg: TCGMemOp is now
accelerator independent MemOp"

Signed-off-by: Tony Nguyen <tony.nguyen@bt.com>
Message-Id: <11e818d38ebc40e986cfa62dd7d0afdc@tpw09926dag18e.domain1.systemhost.net>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: tony.nguyen@bt.com <tony.nguyen@bt.com>
2019-08-20 17:26:19 +02:00
Markus Armbruster
8a9358cc6e migration: Move the VMStateDescription typedef to typedefs.h
We declare incomplete struct VMStateDescription in a couple of places
so we don't have to include migration/vmstate.h for the typedef.
That's fine with me.  However, the next commit will drop
migration/vmstate.h from a massive number of compiles.  Move the
typedef to qemu/typedefs.h now, so I don't have to insert struct in
front of VMStateDescription all over the place then.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190812052359.30071-15-armbru@redhat.com>
2019-08-16 13:31:52 +02:00
Markus Armbruster
a8d2532645 Include qemu-common.h exactly where needed
No header includes qemu-common.h after this commit, as prescribed by
qemu-common.h's file comment.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190523143508.25387-5-armbru@redhat.com>
[Rebased with conflicts resolved automatically, except for
include/hw/arm/xlnx-zynqmp.h hw/arm/nrf51_soc.c hw/arm/msf2-soc.c
block/qcow2-refcount.c block/qcow2-cluster.c block/qcow2-cache.c
target/arm/cpu.h target/lm32/cpu.h target/m68k/cpu.h target/mips/cpu.h
target/moxie/cpu.h target/nios2/cpu.h target/openrisc/cpu.h
target/riscv/cpu.h target/tilegx/cpu.h target/tricore/cpu.h
target/unicore32/cpu.h target/xtensa/cpu.h; bsd-user/main.c and
net/tap-bsd.c fixed up]
2019-06-12 13:20:20 +02:00
Richard Henderson
e8b5fae516 cpu: Remove CPU_COMMON
This macro is now always empty, so remove it.  This leaves the
entire contents of CPUArchState under the control of the guest
architecture.

Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-06-10 07:03:42 -07:00
Richard Henderson
5b146dc716 cpu: Introduce CPUNegativeOffsetState
Nothing in there so far, but all of the plumbing done
within the target ArchCPU state.

Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-06-10 07:03:42 -07:00
Richard Henderson
677c4d69ac cpu: Move ENV_OFFSET to exec/gen-icount.h
Now that we have ArchCPU, we can define this generically,
in the one place that needs it.

Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-06-10 07:03:42 -07:00
Richard Henderson
5a59fbce91 target/sparc: Use env_cpu, env_archcpu
Cleanup in the boilerplate that each target must define.
Replace sparc_env_get_cpu with env_archcpu.  The combination
CPU(sparc_env_get_cpu) should have used ENV_GET_CPU to begin;
use env_cpu now.

Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-06-10 07:03:42 -07:00
Richard Henderson
29a0af618d cpu: Replace ENV_GET_CPU with env_cpu
Now that we have both ArchCPU and CPUArchState, we can define
this generically instead of via macro in each target's cpu.h.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-06-10 07:03:34 -07:00
Richard Henderson
2161a612b4 cpu: Define ArchCPU
For all targets, do this just before including exec/cpu-all.h.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-06-10 07:03:34 -07:00
Richard Henderson
4f7c64b381 cpu: Define CPUArchState with typedef
For all targets, do this just before including exec/cpu-all.h.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-06-10 07:03:34 -07:00
Richard Henderson
74433bf083 tcg: Split out target/arch/cpu-param.h
For all targets, into this new file move TARGET_LONG_BITS,
TARGET_PAGE_BITS, TARGET_PHYS_ADDR_SPACE_BITS,
TARGET_VIRT_ADDR_SPACE_BITS, and NB_MMU_MODES.

Include this new file from exec/cpu-defs.h.

This now removes the somewhat odd requirement that target/arch/cpu.h
defines TARGET_LONG_BITS before including exec/cpu-defs.h, so push the
bulk of the includes within target/arch/cpu.h to the top.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-06-10 07:03:34 -07:00
Richard Henderson
e84942f2ce target/sparc: Convert to CPUClass::tlb_fill
Cc: Artyom Tarasenko <atar4qemu@gmail.com>
Cc: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-05-10 11:12:50 -07:00
Markus Armbruster
90c84c5600 qom/cpu: Simplify how CPUClass:cpu_dump_state() prints
CPUClass method dump_statistics() takes an fprintf()-like callback and
a FILE * to pass to it.  Most callers pass fprintf() and stderr.
log_cpu_state() passes fprintf() and qemu_log_file.
hmp_info_registers() passes monitor_fprintf() and the current monitor
cast to FILE *.  monitor_fprintf() casts it right back, and is
otherwise identical to monitor_printf().

The callback gets passed around a lot, which is tiresome.  The
type-punning around monitor_fprintf() is ugly.

Drop the callback, and call qemu_fprintf() instead.  Also gets rid of
the type-punning, since qemu_fprintf() takes NULL instead of the
current monitor cast to FILE *.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20190417191805.28198-15-armbru@redhat.com>
2019-04-18 22:18:59 +02:00
Markus Armbruster
fad866daa8 target: Clean up how the dump_mmu() print
The various dump_mmu() take an fprintf()-like callback and a FILE * to
pass to it, and so do their helper functions.  Passing around callback
and argument is rather tiresome.

Most dump_mmu() are called only by the target's hmp_info_tlb().  These
all pass monitor_printf() cast to fprintf_function and the current
monitor cast to FILE *.

SPARC's dump_mmu() gets also called from target/sparc/ldst_helper.c a
few times #ifdef DEBUG_MMU.  These calls pass fprintf() and stdout.

The type-punning is technically undefined behaviour, but works in
practice.  Clean up: drop the callback, and call qemu_printf()
instead.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20190417191805.28198-11-armbru@redhat.com>
2019-04-18 22:18:59 +02:00
Markus Armbruster
0442428a89 target: Simplify how the TARGET_cpu_list() print
The various TARGET_cpu_list() take an fprintf()-like callback and a
FILE * to pass to it.  Their callers (vl.c's main() via list_cpus(),
bsd-user/main.c's main(), linux-user/main.c's main()) all pass
fprintf() and stdout.  Thus, the flexibility provided by the (rather
tiresome) indirection isn't actually used.

Drop the callback, and call qemu_printf() instead.

Calling printf() would also work, but would make the code unsuitable
for monitor context without making it simpler.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190417191805.28198-10-armbru@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2019-04-18 22:18:59 +02:00
Igor Mammedov
3f71e724e2 cpu: get rid of unused cpu_init() defines
cpu_init(cpu_model) were replaced by cpu_create(cpu_type) so
no users are left, remove it.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au> (ppc)
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <1518000027-274608-6-git-send-email-imammedo@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2018-03-19 14:10:36 -03:00
Igor Mammedov
0dacec874f cpu: add CPU_RESOLVING_TYPE macro
it will be used for providing to cpu name resolving class for
parsing cpu model for system and user emulation code.

Along with change add target to null-machine tests, so
that when switch to CPU_RESOLVING_TYPE happens,
it would ensure that null-machine usecase still works.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu> (m68k)
Acked-by: David Gibson <david@gibson.dropbear.id.au> (ppc)
Acked-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> (tricore)
Message-Id: <1518000027-274608-4-git-send-email-imammedo@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
[ehabkost: Added macro to riscv too]
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2018-03-19 14:10:36 -03:00
Alex Bennée
24f91e81b6 target/*/cpu.h: remove softfloat.h
As cpu.h is another typically widely included file which doesn't need
full access to the softfloat API we can remove the includes from here
as well. Where they do need types it's typically for float_status and
the rounding modes so we move that to softfloat-types.h as well.

As a result of not having softfloat in every cpu.h call we now need to
add it to various helpers that do need the full softfloat.h
definitions.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
[For PPC parts]
Acked-by: David Gibson <david@gibson.dropbear.id.au>
2018-02-21 10:20:24 +00:00