The most interesting or most complicated part here is the syscall_nr.h
generators. In order to keep the generation logic all in meson.build,
I am adding to config_target the name of the .tbl file, and making the
generated file syscall<SUFFIX>_nr.h for input file syscall<SUFFIX>.tbl.
For architectures where the input file is not named syscall_nr.tbl,
syscall_nr.h has to be a source file; it's just a forwarder for x86
(i386/x86_64), while for MIPS64 it chooses between N32 and N64 ABIs.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The Arm signal-handling code has some parts ifdeffed with a
TARGET_CONFIG_CPU_32, which is always defined. This is a leftover
from when this code's structure was based on the Linux kernel
signal handling code, where it was intended to support 26-bit
Arm CPUs. The kernel dropped its CONFIG_CPU_32 in kernel commit
4da8b8208eded0ba21e3 in 2009.
QEMU has never had 26-bit CPU support and is unlikely to ever
add it; we certainly aren't going to support 26-bit Linux
binaries via linux-user mode. The ifdef is just unhelpful
noise, so remove it entirely.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200518143014.20689-1-peter.maydell@linaro.org
This fixes signal handlers running with the wrong endianness if the
interrupted code used SETEND to dynamically switch endianness.
Signed-off-by: Amanieu d'Antras <amanieu@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20200511131117.2486486-1-amanieu@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Using the MSR instruction to write to CPSR.E is deprecated, but it is
required to work from any mode including unprivileged code. We were
incorrectly forbidding usermode code from writing it because
CPSR_USER did not include the CPSR_E bit.
We use CPSR_USER in only three places:
* as the mask of what to allow userspace MSR to write to CPSR
* when deciding what bits a linux-user signal-return should be
able to write from the sigcontext structure
* in target_user_copy_regs() when we set up the initial
registers for the linux-user process
In the first two cases not being able to update CPSR.E is a bug, and
in the third case it doesn't matter because CPSR.E is always 0 there.
So we can fix both bugs by adding CPSR_E to CPSR_USER.
Because the cpsr_write() in restore_sigcontext() is now changing
a CPSR bit which is cached in hflags, we need to add an
arm_rebuild_hflags() call there; the callsite in
target_user_copy_regs() was already rebuilding hflags for other
reasons.
(The recommended way to change CPSR.E is to use the 'SETEND'
instruction, which we do correctly allow from usermode code.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200518142801.20503-1-peter.maydell@linaro.org
Our code to identify syscall numbers has some issues:
* for Thumb mode, we never need the immediate value from the insn,
but we always read it anyway
* bad immediate values in the svc insn should cause a SIGILL, but we
were abort()ing instead (via "goto error")
We can fix both these things by refactoring the code that identifies
the syscall number to more closely follow the kernel COMPAT_OABI code:
* for Thumb it is always r7
* for Arm, if the immediate value is 0, then this is an EABI call
with the syscall number in r7
* otherwise, we XOR the immediate value with 0x900000
(ARM_SYSCALL_BASE for QEMU; __NR_OABI_SYSCALL_BASE in the kernel),
which converts valid syscall immediates into the desired value,
and puts all invalid immediates in the range 0x100000 or above
* then we can just let the existing "value too large, deliver
SIGILL" case handle invalid numbers, and drop the 'goto error'
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 20200420212206.12776-5-peter.maydell@linaro.org
The kernel has different handling for syscalls with invalid
numbers that are in the "arm-specific" range 0x9f0000 and up:
* 0x9f0000..0x9f07ff return -ENOSYS if not implemented
* other out of range syscalls cause a SIGILL
(see the kernel's arch/arm/kernel/traps.c:arm_syscall())
Implement this distinction. (Note that our code doesn't look
quite like the kernel's, because we have removed the
0x900000 prefix by this point, whereas the kernel retains
it in arm_syscall().)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20200420212206.12776-4-peter.maydell@linaro.org
We incorrectly treat SVC 0xf0002 as a cacheflush request (which is a
NOP for QEMU). This is the wrong syscall number, because in the
svc-immediate OABI syscall numbers are all offset by the
ARM_SYSCALL_BASE value and so the correct insn is SVC 0x9f0002.
(This is handled further down in the code with the other Arm-specific
syscalls like NR_breakpoint.)
When this code was initially added in commit 6f1f31c069 in
2004, ARM_NR_cacheflush was defined as (ARM_SYSCALL_BASE + 0xf0000 + 2)
so the value in the comparison took account of the extra 0x900000
offset. In commit fbb4a2e371 in 2008, the ARM_SYSCALL_BASE
was removed from the definition of ARM_NR_cacheflush and handling
for this group of syscalls was added below the point where we subtract
ARM_SYSCALL_BASE from the SVC immediate value. However that commit
forgot to remove the now-obsolete earlier handling code.
Remove the spurious ARM_NR_cacheflush condition.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 20200420212206.12776-3-peter.maydell@linaro.org
In linux-user/arm/cpu-loop.c we incorrectly treat EXCP_BKPT similarly
to EXCP_SWI, which means that if the guest executes a BKPT insn then
QEMU will perform a syscall for it (which syscall depends on what
value happens to be in r7...). The correct behaviour is that the
guest process should take a SIGTRAP.
This code has been like this (more or less) since commit
06c949e62a in 2006 which added BKPT in the first place. This is
probably because at the time the same code path was used to handle
both Linux syscalls and semihosting calls, and (on M profile) BKPT
with a suitable magic number is used for semihosting calls. But
these days we've moved handling of semihosting out to an entirely
different codepath, so we can fix this bug by simply removing this
handling of EXCP_BKPT and instead making it deliver a SIGTRAP like
EXCP_DEBUG (as we do already on aarch64).
Reported-by: <omerg681@gmail.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20200420212206.12776-2-peter.maydell@linaro.org
Fixes: https://bugs.launchpad.net/qemu/+bug/1873898
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Run scripts/update-syscalltbl.sh with linux commit 0bf999f9c5e7
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Message-Id: <20200310103403.3284090-20-laurent@vivier.eu>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Copy syscall.tbl and syscallhdr.sh from linux/arch/arm/tools/syscalls v5.5
Update syscallhdr.sh to generate QEMU syscall_nr.h
Update syscall.c to manage TARGET_NR_arm_sync_file_range as it has
replaced TARGET_NR_sync_file_range2
Move existing stuff from linux-user/Makefile.objs to
linux-user/arm/Makefile.objs
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200310103403.3284090-9-laurent@vivier.eu>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Use this in the places that were checking ARM_FEATURE_VFP, and
are obviously testing for the existance of the register set
as opposed to testing for some particular instruction extension.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20200224222232.13807-2-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Since most calls to `gemu_log` are actually logging unimplemented features,
this change replaces most non-strace calls to `gemu_log` with calls to
`qemu_log_mask(LOG_UNIMP, ...)`. This allows the user to easily log to
a file, and to mask out these log messages if they desire.
Note: This change is slightly backwards incompatible, since now these
"unimplemented" log messages will not be logged by default.
Signed-off-by: Josh Kunz <jkz@google.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20200204025416.111409-2-jkz@google.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Update arm syscall numbers based on Linux kernel v5.5.
CC: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <1581596954-2305-3-git-send-email-aleksandar.markovic@rt-rk.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Provides a blocking call to read a character from the console using
semihosting.chardev, if specified. This takes some careful command
line options to use stdio successfully as the serial ports, monitor
and semihost all want to use stdio. Here's a sample set of command
line options which share stdio between semihost, monitor and serial
ports:
qemu \
-chardev stdio,mux=on,id=stdio0 \
-serial chardev:stdio0 \
-semihosting-config enable=on,chardev=stdio0 \
-mon chardev=stdio0,mode=readline
This creates a chardev hooked to stdio and then connects all of the
subsystems to it. A shorter mechanism would be good to hear about.
Signed-off-by: Keith Packard <keithp@keithp.com>
Message-Id: <20191104204230.12249-1-keithp@keithp.com>
[AJB: fixed up deadlock, minor commit title reword]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Tested-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Before we introduce blocking semihosting calls we need to ensure we
can restart the system on semi hosting exception. To be able to do
this the EXCP_SEMIHOST operation should be idempotent until it finally
completes. Practically this means ensureing we only update the pc
after the semihosting call has completed.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Keith Packard <keithp@keithp.com>
Tested-by: Keith Packard <keithp@keithp.com>
We will need a target-specific hook for adjusting registers
in the parent during clone. Add an empty inline function for
each target, and invoke it from the proper places.
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20191106113318.10226-11-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
We will need a target-specific hook for adjusting registers
in the parent during clone. To avoid confusion, rename the
one we have to make it clear it affects the child.
At the same time, pass in the flags from the clone syscall.
We will need them for correct behaviour for Sparc.
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20191106113318.10226-10-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Continue setting, but not relying upon, env->hflags.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20191023150057.25731-24-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Now we do all our checking at translate time we can make cpu_loop a
little bit simpler. We also introduce a simple linux-user semihosting
test case to defend the functionality. The out-of-tree softmmu based
semihosting tests are still more comprehensive.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20190913151845.12582-6-alex.bennee@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Limit the virtual address space for M-profile cpus to 2GB,
so that we avoid all of the magic addresses in the top half
of the M-profile system map.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20190822185929.16891-3-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Turn the scalar macro into a functional macro. Move the creation
of the cpu up a bit within main() so that we can pass it to the
invocation of MAX_RESERVED_VA. Delay the validation of the -R
parameter until MAX_RESERVED_VA is computed.
So far no changes to any of the MAX_RESERVED_VA macros to actually
use the cpu in any way, but ARM will need it.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20190822185929.16891-2-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
This is ostensibly to avoid the weirdness of len looking like it might
come from a guest and sometimes being used. While we are at it fix up
the error checking for the arm-linux-user implementation of the API
which got flagged up by Coverity (CID 1401700).
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
No header includes qemu-common.h after this commit, as prescribed by
qemu-common.h's file comment.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190523143508.25387-5-armbru@redhat.com>
[Rebased with conflicts resolved automatically, except for
include/hw/arm/xlnx-zynqmp.h hw/arm/nrf51_soc.c hw/arm/msf2-soc.c
block/qcow2-refcount.c block/qcow2-cluster.c block/qcow2-cache.c
target/arm/cpu.h target/lm32/cpu.h target/m68k/cpu.h target/mips/cpu.h
target/moxie/cpu.h target/nios2/cpu.h target/openrisc/cpu.h
target/riscv/cpu.h target/tilegx/cpu.h target/tricore/cpu.h
target/unicore32/cpu.h target/xtensa/cpu.h; bsd-user/main.c and
net/tap-bsd.c fixed up]
Cleanup in the boilerplate that each target must define.
Replace arm_env_get_cpu with env_archcpu. The combination
CPU(arm_env_get_cpu) should have used ENV_GET_CPU to begin;
use env_cpu now.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Now that we have both ArchCPU and CPUArchState, we can define
this generically instead of via macro in each target's cpu.h.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Now we have a common semihosting console interface use that for our
string output. However ARM is currently unique in also supporting
semihosting for linux-user so we need to replicate the API in
linux-user. If other architectures gain this support we can move the
file later.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
The CPU main-loop routines for linux-user generally
call gdb_handlesig() when they're about to queue a
SIGTRAP signal. This is wrong, because queue_signal()
will cause us to pend a signal, and process_pending_signals()
will then call gdb_handlesig() itself. So the effect is that
we notify gdb of the SIGTRAP, and then if gdb says "OK,
continue with signal X" we will incorrectly notify
gdb of the signal X as well. We don't do this double-notify
for anything else, only SIGTRAP.
Remove this unnecessary and incorrect code from all
the targets except for nios2 (whose main loop is
doing something different and broken, and will be handled
in a separate patch).
This bug only manifests if the user responds to the reported
SIGTRAP using "signal SIGFOO" rather than "continue"; since
the latter is the overwhelmingly common thing to do after a
breakpoint most people won't have hit this.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20181019174958.26616-2-peter.maydell@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
add a per target target_fcntl.h and include the generic one from them
No code change.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20180529194207.31503-2-laurent@vivier.eu>
and include the file from architectures without specific definitions
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20180519092956.15134-5-laurent@vivier.eu>
Since commit 8efb2ed5ec ("linux-user: Correct signedness of
target_flock l_start and l_len fields"), flock64 structure uses
abi_llong for l_start and l_len in place of "unsigned long long"
this should force them to be aligned accordingly to the target
rules. So we can remove the padding field and the QEMU_PACKED
attribute.
I have compared the result of the following program before and
after the change:
cat -> flock64_dump <<EOF
p/d sizeof(struct target_flock64)
p/d &((struct target_flock64 *)0)->l_type
p/d &((struct target_flock64 *)0)->l_whence
p/d &((struct target_flock64 *)0)->l_start
p/d &((struct target_flock64 *)0)->l_len
p/d &((struct target_flock64 *)0)->l_pid
quit
EOF
for file in build/all/*-linux-user/qemu-* ; do
echo $file
gdb -batch -nx -x flock64_dump $file 2> /dev/null
done
The sizeof() changes because we remove the QEMU_PACKED.
The new size is 32 (except for i386 and m68k) and this is
the real size of "struct flock64" on the target architecture.
The following architectures differ:
aarch64_be, aarch64, alpha, armeb, arm, cris, hppa, nios2, or1k,
riscv32, riscv64, s390x.
For a subset of these architectures, I have checked with the following
program the new structure is the correct one:
#include <stdio.h>
#define __USE_LARGEFILE64
#include <fcntl.h>
int main(void)
{
printf("struct flock64 %d\n", sizeof(struct flock64));
printf("l_type %d\n", &((struct flock64 *)0)->l_type);
printf("l_whence %d\n", &((struct flock64 *)0)->l_whence);
printf("l_start %d\n", &((struct flock64 *)0)->l_start);
printf("l_len %d\n", &((struct flock64 *)0)->l_len);
printf("l_pid %d\n", &((struct flock64 *)0)->l_pid);
}
[I have checked aarch64, alpha, hppa, s390x]
For ARM, the target_flock64 becomes the EABI definition, so we need to
define the OABI one in place of the EABI one and use it when it is
needed.
I have also fixed the alignment value for sh4 (to align llong on 4 bytes)
(see c2e3dee6e0 "linux-user: Define target alignment size")
[We should check alignment properties for cris, nios2 and or1k]
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20180502215730.28162-1-laurent@vivier.eu>
The FDPIC restorer needs to deal with a function descriptor, hence we
have to extend 'retcode' such that it can hold the instructions needed
to perform this.
The restorer sequence uses the same thumbness as the exception
handler (mainly to support Thumb-only architectures).
Co-Authored-By: Mickaël Guêné <mickael.guene@st.com>
Signed-off-by: Christophe Lyon <christophe.lyon@st.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20180430080404.7323-5-christophe.lyon@st.com>
[lv: moved the change to linux-user/arm/signal.c]
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
No code change, only move code from main.c to
arm/cpu_loop.c and duplicate some macro
defined for both arm and aarch64.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20180411185651.21351-5-laurent@vivier.eu>
Create a cpu_loop-common.h for future use by
these new files and use it in the existing
main.c
Introduce target_cpu_copy_regs():
declare the function in cpu_loop-common.h
and an empty function for each target,
to move all the cpu_loop prologues to this function.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20180411185651.21351-2-laurent@vivier.eu>
Instead of calling setup_frame() conditionally to a list of known targets,
define TARGET_ARCH_HAS_SETUP_FRAME if the target provides the function
and call it only if the macro is defined.
Move declarations of setup_frame() and setup_rt_frame() to
linux-user/signal-common.h
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20180424192635.6027-21-laurent@vivier.eu>
No code change, only move code from signal.c to
arm/signal.c, except adding includes and
exporting setup_frame() and setup_rt_frame().
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20180424192635.6027-4-laurent@vivier.eu>
Create a signal-common.h for future use by these new files
and use it in the existing signal.c
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20180424192635.6027-2-laurent@vivier.eu>
Instead of a sequence of "#if ... #endif" move the
selection to a function in linux-user/*/target_elf.h
We can't add them in linux-user/*/target_cpu.h
because we will need to include "elf.h" to
use ELF flags with eflags, and including
"elf.h" in "target_cpu.h" introduces some
conflicts in elfload.c
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20180220173307.25125-2-laurent@vivier.eu>
With glibc 2.27 the openpty function prefers the TIOCGPTPEER ioctl.
Signed-off-by: Andreas Schwab <schwab@suse.de>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <mvmbmhdosb9.fsf_-_@suse.de>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Our copy of the nwfpe code for emulating of the old FPA11 floating
point unit doesn't check the coprocessor number in the instruction
when it emulates it. This means that we might treat some
instructions which should really UNDEF as being FPA11 instructions by
accident.
The kernel's copy of the nwfpe code doesn't make this error; I suspect
the bug was noticed and fixed as part of the process of mainlining
the nwfpe code more than a decade ago.
Add a check that the coprocessor number (which is always in bits
[11:8] of the instruction) is either 1 or 2, which is where the
FPA11 lives.
Reported-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We had a check using TARGET_VIRT_ADDR_SPACE_BITS to make sure
that the allocation coming in from the command-line option was
not too large, but that didn't include target-specific knowledge
about other restrictions on user-space.
Remove several target-specific hacks in linux-user/main.c.
For MIPS and Nios, we can replace them with proper adjustments
to the respective target's TARGET_VIRT_ADDR_SPACE_BITS definition.
For ARM, we had no existing ifdef but I suspect that the current
default value of 0xf7000000 was chosen with this in mind. Define
a workable value in linux-user/arm/, and also document why the
special case is required.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20170708025030.15845-3-rth@twiddle.net>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
TARGET_NR_select can have three different implementations:
1- to always return -ENOSYS
microblaze, ppc, ppc64
-> TARGET_WANT_NI_OLD_SELECT
2- to take parameters from a structure pointed by arg1
(kernel sys_old_select)
i386, arm, m68k
-> TARGET_WANT_OLD_SYS_SELECT
3- to take parameters from arg[1-5]
(kernel sys_select)
x86_64, alpha, s390x,
cris, sparc, sparc64
Some (new) architectures don't define NR_select,
4- but only NR__newselect with sys_select:
mips, mips64, sh
5- don't define NR__newselect, and use pselect6 syscall:
aarch64, openrisc, tilegx, unicore32
Reported-by: Timothy Pearson <tpearson@raptorengineering.com>
Reported-by: Allan Wirth <awirth@akamai.com>
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
The shmat() handling needs to do target-specific handling
of the attach address for shmat():
* if the SHM_RND flag is passed, the address is rounded
down to a SHMLBA boundary
* if SHM_RND is not passed, then the call is failed EINVAL
if the address is not a multiple of SHMLBA
Since SHMLBA is target-specific, we need to do this
checking and rounding in QEMU and can't leave it up to the
host syscall.
Allow targets to define TARGET_FORCE_SHMLBA and provide
a target_shmlba() function if appropriate, and update
do_shmat() to honour them.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
These headers all use TARGET_STRUCTS_H as header guard symbol. Reuse
of the same guard symbol in multiple headers is okay as long as they
cannot be included together.
Since we can avoid guard symbol reuse easily, do so: use guard symbol
$target_TARGET_STRUCTS_H for linux-user/$target/target_structs.h.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
