QEMUFile * is only intended for migration nowadays. Using it for
anything else just adds pain and a layer of buffers for no good
reason.
Signed-off-by: Juan Quintela <quintela@redhat.com>
CC: malc <av1474@comtv.ru>
Signed-off-by: malc <av1474@comtv.ru>
QEMUFile * is only intended for migration nowadays. Using it for
anything else just adds pain and a layer of buffers for no good
reason.
Signed-off-by: Juan Quintela <quintela@redhat.com>
CC: malc <av1474@comtv.ru>
Signed-off-by: malc <av1474@comtv.ru>
Today, when notifying a VM state change with vm_state_notify(),
we pass a VMSTOP macro as the 'reason' argument. This is not ideal
because the VMSTOP macros tell why qemu stopped and not exactly
what the current VM state is.
One example to demonstrate this problem is that vm_start() calls
vm_state_notify() with reason=0, which turns out to be VMSTOP_USER.
This commit fixes that by replacing the VMSTOP macros with a proper
state type called RunState.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
OSStatus type is defined as SInt32. That's signed int on __LP64__ and
signed long otherwise.
Since it is an explicit 32-bit-width type, cast to corresponsing POSIX type
and use PRId32 format specifier. This avoids a warning on ppc64.
Cc: malc <av1474@comtv.ru>
Signed-off-by: Andreas Faerber <andreas.faerber@web.de>
Signed-off-by: malc <av1474@comtv.ru>
coreaudioVoiceOut's audioDevicePropertyBufferFrameSize is defined as UInt32
and is being used by reference for AudioDevice{Get,Set}Property().
UInt32 is unsigned int on __LP64__ but unsigned long otherwise.
Cast to POSIX type and use PRIu32 format specifier to hide the details.
This avoids a warning on ppc64.
Cc: malc <av1474@comtv.ru>
Signed-off-by: Andreas Faerber <andreas.faerber@web.de>
Signed-off-by: malc <av1474@comtv.ru>
In audio/coreaudio.c, a variable named "str" was assigned "const char" values,
which resulted in the following warnings:
-----8<-----
audio/coreaudio.c: In function ‘coreaudio_logstatus’:
audio/coreaudio.c:59: warning: initialization discards qualifiers from pointer target type
audio/coreaudio.c:63: warning: assignment discards qualifiers from pointer target type
(...)
-----8<-----
Signed-off-by: Alexandre Raymond <cerbere@gmail.com>
Acked-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Andreas Färber <andreas.faerber@web.de>
This patch removes all references to signal.h when qemu-common.h is included
as they become redundant.
Signed-off-by: Alexandre Raymond <cerbere@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Fix an integer overflow that can happen for signed 32 bit types
when using FLOAT_MIXENG. (Note that at the moment this is only true
when using the MacOSX coreaudio audio driver.)
Signed-off-by: Juha Riihim?ki <juha.riihimaki@nokia.com>
[Peter Maydell: Removed unnecessary casts]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: malc <av1474@comtv.ru>
This was done with:
sed -i 's/qemu_get_clock\>/qemu_get_clock_ns/' \
$(git grep -l 'qemu_get_clock\>' )
sed -i 's/qemu_new_timer\>/qemu_new_timer_ns/' \
$(git grep -l 'qemu_new_timer\>' )
after checking that get_clock and new_timer never occur twice
on the same line. There were no missed occurrences; however, even
if there had been, they would have been caught by the compiler.
There was exactly one false positive in qemu_run_timers:
- current_time = qemu_get_clock (clock);
+ current_time = qemu_get_clock_ns (clock);
which is of course not in this patch.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Request reasonable buffer sizes from pulseaudio. Without this
pa_simple_write() can block quite long and lead to dropouts,
especially with guests which use small audio ring buffers.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: malc <av1474@comtv.ru>
Limit the size of data pieces processed by the pulseaudio worker
threads. Never ever process more than 1/4 of the buffer at once.
Background: The buffer area currently processed by the pulseaudio thread
is blocked, i.e. the main thread (or iothread) can't fill in more data
there. The buffer processing time is roughly real-time due to the
pa_simple_write() call blocking when the output queue to the pulse
server is full. Thus processing big chunks at once means blocking
a large part of the buffer for a long time. This brings high latency
and can lead to dropouts.
When processing the buffer in smaller chunks the rpos handling becomes a
problem though. The thread reads hw->rpos without knowing whenever
qpa_run_out has already seen the last (small) chunk processed and
updated rpos accordingly. There is no point in reading hw->rpos though,
pa->rpos can be used instead. We just need to take care to initialize
pa->rpos before kicking the thread.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: malc <av1474@comtv.ru>
Refactor the volume mixing, so it can be reused for capturing devices.
Additionally, it removes superfluous multiplications with the nominal
volume within the hardware voice code path.
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: malc <av1474@comtv.ru>
This will fix the return value of the function which otherwise returns too
many samples because sw->total_hw_samples_acquired isn't correctly
accounted.
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: malc <av1474@comtv.ru>
Add support for the spice audio interface. With this patch applied
audio can be forwarded over the network from/to the spice client. Both
recording and playback is supported.
The driver is first in the driver list, but the can_be_default flag is
set only in case spice is active. So if you have the spice protocol
enabled the spice audio driver is the default one, otherwise whatever
comes first after spice in the list. Overriding the default using
QEMU_AUDIO_DRV works in any case.
[ v2: audio codestyle: add spaces before open parenthesis ]
[ v2: add const to silence array ]
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Cc: malc <av1474@comtv.ru>
Signed-off-by: malc <av1474@comtv.ru>
snd_pcm_start() starts the capture process and ensures that the events
are delivered to the poll handler. Without the call, capture can be started
only when there is simultaneous playback running.
Signed-off-by: Jindrich Makovicka <makovick@gmail.com>
Signed-off-by: malc <av1474@comtv.ru>
Playback control function did not disable polling when playback stops.
Caused busy spinning of the main loop due to unprocessed events.
Signed-off-by: Jindrich Makovicka <makovick@gmail.com>
Signed-off-by: malc <av1474@comtv.ru>
Since version 4.4.x, gcc supports additional format attributes.
__attribute__ ((format (gnu_printf, 1, 2)))
should be used instead of
__attribute__ ((format (printf, 1, 2))
because QEMU always uses standard format strings (even with mingw32).
The patch replaces format attribute printf / __printf__ by macro
GCC_FMT_ATTR which uses gnu_printf if supported.
It also removes an #ifdef __GNUC__ (not needed any longer).
Cc: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Fix a rpos coordination bug between qpa_run_out() and qpa_thread_out(),
which shows up as playback noises.
qpa_run_out()
qpa_thread_out loop N critical section 1
qpa_run_out() qpa_thread_out loop N doing pa_simple_write()
qpa_run_out() qpa_thread_out loop N doing pa_simple_write()
qpa_thread_out loop N critical section 2
qpa_thread_out loop N+1 critical section 1
qpa_run_out() qpa_thread_out loop N+1 doing pa_simple_write()
In the above scheme, "qpa_thread_out loop N+1 critical section 1" will
get the same rpos as the one used by "qpa_thread_out loop N critical
section 1". So it will be reading dead samples from the old rpos.
The rpos can only be updated back to qpa_thread_out when there is a
qpa_run_out() run between two qpa_thread_out loops.
normal sequence:
qpa_thread_out:
hw->rpos (X0) => local rpos => pa->rpos (X1)
qpa_run_out:
pa->rpos (X1) => hw->rpos (X1)
qpa_thread_out:
hw->rpos (X1) => local rpos => pa->rpos (X2)
buggy sequence:
qpa_thread_out:
hw->rpos (X0) => local rpos => pa->rpos (X1)
qpa_thread_out:
hw->rpos (X0) => local rpos => pa->rpos (X1')
Obviously qpa_run_out() shall be called at least once between any two
qpa_thread_out loops (after pa->rpos is set), in order for the new
qpa_thread_out loop to see the updated rpos.
Setting pa->live to 0 does the trick. The next loop will have to wait
for one qpa_run_out() invocation in order to get a non-zero pa->live
and proceed.
Signed-off-by: malc <av1474@comtv.ru>
Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
By moving the definition of GCC_ATTR and GCC_FMT_ATTR
from audio_int.h to qemu-common.h these macros are
now generally available for further patches which add
the gcc format attribute.
Newer gcc versions support format gnu_printf which is
better suited for use in QEMU than format printf
(QEMU always uses standard format strings (even with mingw32)).
V2: Use correct operator '==' (instead of '=')
Cc: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
When available, we'd like to be able to access the DeviceState
when registering a savevm. For buses with a get_dev_path()
function, this will allow us to create more unique savevm
id strings.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Remove unused 'shift' variable spotted by clang.
Also clean up aud_to_sdlfmt which used to get the value
of shift.
Signed-off-by: Serge Ziryukin <ftrvxmtrx@gmail.com>
Signed-off-by: malc <av1474@comtv.ru>
Commits 376253ec..731b0364 introduced global variable cur_mon, which
points to the "default monitor" (if any), except during execution of
monitor_read() or monitor_control_read() it points to the monitor from
which we're reading instead (the "current monitor"). Monitor command
handlers run within monitor_read() or monitor_control_read().
Default monitor and current monitor are really separate things, and
squashing them together is confusing and error-prone.
For instance, usb_host_scan() can run both in "info usbhost" and
periodically via usb_host_auto_check(). It prints to cur_mon, which
is what we want in the former case: the monitor executing "info
usbhost". But since that's the default monitor in the latter case, it
periodically spams the default monitor there.
A few places use cur_mon to log stuff to the default monitor. If we
ever log something while cur_mon points to current monitor instead of
default monitor, the log temporarily "jumps" to another monitor.
Whether that can or cannot happen isn't always obvious.
Maybe logging to the default monitor (which may not even exist) is a
bad idea, and we should log to stderr or a logfile instead. But
that's outside the scope of this commit.
Change cur_mon to point to the current monitor. Create new
default_mon to point to the default monitor. Update users of cur_mon
accordingly.
This fixes the periodical spamming of the default monitor by
usb_host_scan(). It also stops "log jumping", should that problem
exist.
This reverts commit 4839abe78f.
The commit was badly broken, Gentoo has sdl as the default driver,
consequently 5 gentoo users have hit the breakage and were kind enough
to report, so thank you:
Claes Gyllenswrd
vekin
Chris
But above all thanks to Toralf Foerster who actually provied enough
information to pinpoint the breakage to sdlaudio.
http://bugs.gentoo.org/show_bug.cgi?id=294269
Turns out on those versions of FreeBSD (>= 7.x) that know OSS_GETVERSION
the ioctl doesn't actually work yet (except in the Linuxolator), so if
building on FreeBSD assume the sound drivers are new enough if the ioctl
returns the errno it does currently on FreeBSD.
(Rev 2 after private discussion with malc.)
Signed-off-by: Juergen Lock <nox@jelal.kn-bremen.de>
Signed-off-by: malc <av1474@comtv.ru>
Previous patch introduced subtle regression, in cases when
OSS_GETVERSION fails the code wasn't falling back to
SNDCTL_DSP_SETFRAGMENT.
Signed-off-by: malc <av1474@comtv.ru>
