Note that the "real" support is reported. A configuration like
--disable-system --enable-kvm will report "no" for "KVM support" because
no KVM-supported target is being compiled.
Reported-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This does not have any effect on Meson's behavior itself, since "meson test"
always rebuilds everything (that is one reason why we are not using it...).
However, mtest2make can use this information to do a selective rebuild
for the requested suite.
Cc: Thomas Huth <thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
While detection of the framework was already there, moving
the option allows for better error reporting.
Reported-by: Christophe de Dinechin <dinechin@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Because LIBS is not used anymore, tcmalloc/jemalloc does
not work with binaries whose description is in Meson.
The fix is simply to move them to Meson too.
For consistency with other configure options, specifying
--enable-malloc-trim together with --enable-{tc,je}malloc
becomes a fatal error.
Reported-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
libmultipath has a dependency on libdevmapper, so
include it as well when static linking. It seems that
the rabbit hole ends there.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This is the first compiler/linker test that has been moved to Meson.
Add more section headings to keep things clearer.
This also fixes static linking to libmpathpersist, which has a
dependency on libmultipath but no pkg-config file to describe it.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The QEMU_GA_MSI_ENABLED config-host.mak variable is emitted by
./configure. meson.build actually checks for CONFIG_QGA_MSI_ENABLED:
summary_info += {'QGA MSI support': config_host.has_key('CONFIG_QGA_MSI_ENABLED')}
Rename QEMU_GA_MSI_ENABLED to CONFIG_QGA_MSI for consistency with
CONFIG_QGA_VSS. Also use 'y' instead of 'yes' for consistency.
This fixes the feature summary printed by meson.build.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20200914095231.621068-4-stefanha@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Since the variable is used for path concatenation, the result would
ignore the prefix directory altogether.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We no longer use the generated texinfo format documentation,
so delete the code that generates it, and the test case for
the generation.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20200925162316.21205-17-peter.maydell@linaro.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
The automatic dependency handling for Sphinx manuals only makes the output
depend on the input documentation files. This means that if you edit
the Python source of an extension then the documentation won't be
rebuilt.
Create a list of all the source files for the extensions and add
it to the dependencies for the manuals. This is similar to how we
handle the qapi_gen_depends list.
Because we don't try to identify which manuals are using which
Sphinx extensions, a change to the source of one extension will
always rebuild the entire manual set, not merely the manuals
which have changed. This is acceptable because we don't change
the extensions all that often.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20200925162316.21205-15-peter.maydell@linaro.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Re rebuilding the enitre manual set being acceptable "because we
don't change the extensions all that often": we also rebuild it when
the QAPI generator code the qapidoc extension depends on changes.
This will inconvenience QAPI developers. Can't be helped now.]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
We're going to want to use SPHINX_ARGS in both docs/meson.build
and tests/qapi-schema/meson.build. Move the definition up to the
top level file so it is available to both subdirectories.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20200925162316.21205-14-peter.maydell@linaro.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Convert qemu-qmp-ref to rST format. This includes dropping
the plain-text, pdf and info format outputs for this document;
as with all our other Sphinx-based documentation, we provide
HTML and manpage only.
The qemu-qmp-ref.rst is somewhat more stripped down than
the .texi was, because we do not (currently) attempt to
generate indexes for the commands, events and data types
being documented.
Again, we drop the direct link from index.html.in now that
the QMP ref is part of the interop manual.
This commit removes the code from the root meson.build file that
handled the various Texinfo-based outputs, because we no longer
generate any documentation except for the Sphinx HTML manuals and the
manpages, and the code can't handle having an empty list of files
to process.. We'll do further cleanup of the remainders of
Texinfo support in subsequent commits.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20200925162316.21205-10-peter.maydell@linaro.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Unicode legacy literal dumbed down to plain string literal, TODO
comment on displaying QEMU version added, "make html" fixed,
storage-daemon/qapi/meson.build updated]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Convert qemu-ga-ref to rST format. This includes dropping
the plain-text, pdf and info format outputs for this document;
as with all our other Sphinx-based documentation, we provide
HTML and manpage only.
The qemu-ga-ref.rst is somewhat more stripped down than
the .texi was, because we do not (currently) attempt to
generate indexes for the commands, events and data types
being documented.
As the GA ref is now part of the Sphinx 'interop' manual,
we can delete the direct link from index.html.in.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20200925162316.21205-9-peter.maydell@linaro.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Unicode legacy literal dumbed down to plain string literal, TODO
comment on displaying QEMU version added]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Following the same logic as for vhost-net-user and vhost-kernel,
enable vhost-net if vhost-net-vdpa is enabled and vhost-net is not
explicitly disabled.
See 299e6f19b3 ("vhost-net: revamp configure logic")
Autoselect VHOST if VHOST_VDPA is set
See 21c6b0c87e ("configure: simplify vhost condition with Kconfig")
See 2becc36a3e ("meson: infrastructure for building emulators"
Problems can be triggered using;
... --enable-vhost-vdpa --disable-vhost-user --disable-vhost-kernel ...
Fixes: 108a64818e ("vhost-vdpa: introduce vhost-vdpa backend")
Cc: lulu@redhat.com
Cc: pbonzini@redhat.com
Cc: marcandre.lureau@redhat.com
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Message-Id: <20200924210023.160679-1-lvivier@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
'static build:' must display value of CONFIG_STATIC rather than value of
CONFIG_TOOLS.
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200917140700.673171-1-lvivier@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Yonggang Luo <luoyonggang@gmail.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20200915121318.247-14-luoyonggang@gmail.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Use all config symbols not only the host ones.
Needed to make sure device configs like CONFIG_QXL
are used for modules too.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20200914134224.29769-3-kraxel@redhat.com
- Fixes a bug in printing trap causes
- Allows 16-bit writes to the SiFive test device. This fixes the
failure to reboot the RISC-V virt machine
- Support for the Microchip PolarFire SoC and Icicle Kit
- A reafactor of RISC-V code out of hw/riscv
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEE9sSsRtSTSGjTuM6PIeENKd+XcFQFAl9aa4YACgkQIeENKd+X
cFTJjgf5ASfFIO5HqP1l80/UM5Pswyq0IROZDq0ItZa6U4EPzLXoE2N0POriIj4h
Ds2JbMg0ORDqY0VbSxHlgYHMgJ9S6cuVOMnATsPG0d2jaJ3gSxLBu5k/1ENqe+Vw
sSYXZv5uEAUfOFz99zbuhKHct5HzlmBFW9dVHdflUQS+cRgsSXq27mz1BvZ8xMWl
lMhwubqdoNx0rOD3vKnlwrxaf54DcJ2IQT3BtTCjEar3tukdNaLijAuwt2hrFyr+
IwpeFXA/NWar+mXP3M+BvcLaI33j73/ac2+S5SJuzHGp/ot5nT5gAuq3PDEjHMeS
t6z9Exp776VXxNE2iUA5NB65Yp3/6w==
=07oA
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/alistair/tags/pull-riscv-to-apply-20200910' into staging
This PR includes multiple fixes and features for RISC-V:
- Fixes a bug in printing trap causes
- Allows 16-bit writes to the SiFive test device. This fixes the
failure to reboot the RISC-V virt machine
- Support for the Microchip PolarFire SoC and Icicle Kit
- A reafactor of RISC-V code out of hw/riscv
# gpg: Signature made Thu 10 Sep 2020 19:08:06 BST
# gpg: using RSA key F6C4AC46D4934868D3B8CE8F21E10D29DF977054
# gpg: Good signature from "Alistair Francis <alistair@alistair23.me>" [full]
# Primary key fingerprint: F6C4 AC46 D493 4868 D3B8 CE8F 21E1 0D29 DF97 7054
* remotes/alistair/tags/pull-riscv-to-apply-20200910: (30 commits)
hw/riscv: Sort the Kconfig options in alphabetical order
hw/riscv: Drop CONFIG_SIFIVE
hw/riscv: Always build riscv_hart.c
hw/riscv: Move sifive_test model to hw/misc
hw/riscv: Move sifive_uart model to hw/char
hw/riscv: Move riscv_htif model to hw/char
hw/riscv: Move sifive_plic model to hw/intc
hw/riscv: Move sifive_clint model to hw/intc
hw/riscv: Move sifive_gpio model to hw/gpio
hw/riscv: Move sifive_u_otp model to hw/misc
hw/riscv: Move sifive_u_prci model to hw/misc
hw/riscv: Move sifive_e_prci model to hw/misc
hw/riscv: sifive_u: Connect a DMA controller
hw/riscv: clint: Avoid using hard-coded timebase frequency
hw/riscv: microchip_pfsoc: Hook GPIO controllers
hw/riscv: microchip_pfsoc: Connect 2 Cadence GEMs
hw/arm: xlnx: Set all boards' GEM 'phy-addr' property value to 23
hw/net: cadence_gem: Add a new 'phy-addr' property
hw/riscv: microchip_pfsoc: Connect a DMA controller
hw/dma: Add SiFive platform DMA controller emulation
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
# Conflicts:
# hw/riscv/trace-events
Before the change missing SDL was reported as:
../meson.build:253:4: ERROR: Expected 1 arguments, got 2.
After the error as:
../meson.build:258:4: ERROR: Problem encountered: sdl-image required, but SDL was not found
CC: Paolo Bonzini <pbonzini@redhat.com>
CC: "Marc-André Lureau" <marcandre.lureau@redhat.com>
CC: "Philippe Mathieu-Daudé" <philmd@redhat.com>
CC: Rafael Kitover <rkitover@gmail.com>
Signed-off-by: Sergei Trofimovich <slyfox@gentoo.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200908074016.2593596-1-slyfox@gentoo.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
This is an effort to clean up the hw/riscv directory. Ideally it
should only contain the RISC-V SoC / machine codes plus generic
codes. Let's move sifive_gpio model to hw/gpio directory.
Note this also removes the trace-events in the hw/riscv directory,
since gpio is the only supported trace target in that directory.
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <1599129623-68957-5-git-send-email-bmeng.cn@gmail.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Commit c7f419f584 moved softmmu-only files out of the root
directory, but forgot to move the trace events, which should
no longer be generated to "trace-root.h". Fix that by adding
softmmu/trace-events.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Claudio Fontana <cfontana@suse.de>
Reviewed-by: Claudio Fontana <cfontana@suse.de>
Message-id: 20200805130221.24487-1-philmd@redhat.com
[Rebased onto meson.
--Stefan]
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Shell scripts are not easily invoked from the build process
on MSYS, so convert undefsym.sh to a python script.
Signed-off-by: Yonggang Luo <luoyonggang@gmail.com>
Message-Id: <20200902170054.810-3-luoyonggang@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
With this change, the fuzzer-linker script should be specified outside
any --start-group/--end-group pairs. We need this on oss-fuzz, where
partially applying the linker-script results in a linker failure
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Message-Id: <20200902173652.307222-2-alxndr@bu.edu>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The opengl compilation flags were added to QEMU_CFLAGS. We do not
want them to be added to all compilation commands, so export them
also via OPENGL_CFLAGS rather than via QEMU_CFLAGS.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The glib compilation flags were added to QEMU_CFLAGS. While we still
want them to be added to all compilation commands (at least for now),
do that via GLIB_CFLAGS rather than via QEMU_CFLAGS. This shows that
glib is a special case and makes it clearer that QEMU_CFLAGS is only
about compiler commands and not dependencies.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There is no need anymore to produce config-all-devices.mak, compute
the resulting dictionary directly instead of going through grepy.sh.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Since there is not minimum version specified, and it's a test-only
dependency, it's fair to depend on a version that ships with a .pc I
suppose.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20200828110734.1638685-8-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Rename the variable to be more explicit. A further clean-up patch will
move the actual to dependency check to meson entirely.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20200828110734.1638685-4-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Meson automatically adds "-undefined dynamic_lookup" to
shared_module build targets; b_lundef is only needed for
executables. Therefore, we can remove this option.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
check-block has its own test harness, unlike every other test. If
we capture its output, as is in general nicer to do without V=1,
there will be no sign of progress. So for lack of a better option
just move the invocation of the test back to Makefile rules.
As a side effect, this will also fix "make check" in --disable-tools
builds, as they were trying to run qemu-iotests without having
made qemu-img before.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
If nettle is disabled and gcrypt enabled, the compiler and linker flags
needed for gcrypt are not passed.
Gnutls was also not added as a dependancy when gcrypt is enabled.
Attempting to add the library dependencies at the same time as the
source dependencies is error prone, as there are alot of different
rules for picking which sources to use, and some of the source files
use code level conditionals intead. It is thus clearer to add the
library dependencies separately.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20200901133050.381844-2-berrange@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Disabling these parts are sufficient to get the qemu-nbd program
compiling in a Windows build.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20200825103850.119911-4-berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
We do not need to ask cmake for the dependencies, so just use the
pkg-config mechanism. Keep "auto" for SDL so that it tries using
sdl-config too.
The documentation is adjusted to use SDL2_image as the example,
rather than SDL which does not use the "pkg-config" method.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20200826110419.528931-9-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When cross-compiling, by default qemu_mandir is 'c:\Program
Files\QEMU', which is not recognized as being an absolute path, and
meson will end up adding the prefix again.
Use the pre-prefixed meson mandir option instead.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20200826110419.528931-8-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When cross-compiling, by default qemu_docdir is 'c:\Program Files\QEMU\'
which is not recognized as being an absolute path, and meson will end up
adding the prefix again.
Add an option to pass docdir location to meson, pre-prefixed like we do
with other directories, build qemu_docdir with the common suffix and use
that instead of config_host['qemu_docdir'].
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20200826110419.528931-7-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When cross-compiling, by default qemu_datadir is 'c:\Program
Files\QEMU', which is not recognized as being an absolute path, and
meson will end up adding the prefix again.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20200826110419.528931-6-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Meson includes the same logic that tries to look for -lz if
pkg-config (and cmake) cannot find zlib. The undocumented
--disable-zlib-test option becomes a no-op.
There is still an instance of "-lz" in the LIBS directory.
It will go away as soon as tests are converted to meson,
because the zlib dependency does not propagate from libblock.fa
to the Makefile-build unit tests.
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Configure used to probe for SDL2_image in sdl_image_probe (). Meson
should do the same.
This fixes the following error on my system:
Run-time dependency sdl2 found: YES 2.0.8
Found CMake: /usr/bin/cmake (3.17.0)
Run-time dependency sdl-image found: NO (tried pkgconfig and cmake)
../qemu-master/meson.build:256:2: ERROR: Dependency "sdl-image" not
found, tried pkgconfig and cmake
A full log can be found at /home/ruemelin/rpmbuild/BUILD
/qemu-5.1.50-build/meson-logs/meson-log.txt
ERROR: meson setup failed
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-Id: <20200829104158.7461-1-vr_qemu@t-online.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Dunno why the default is set to "always". IMHO it should be "auto",
i.e. only colorize in case stdout goes to a terminal. Cluttering
logfiles and confusing compiler message parsers with terminal control
sequences is not nice ...
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>