Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20230302161543.286002-24-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20230302161543.286002-21-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20230302161543.286002-20-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20230302161543.286002-17-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20230302161543.286002-14-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
follow up fix for missing root-port AML will affect these tests
by adding non-hotpluggable Device descriptors of colplugged
bridges when bridge hotplug is disabled.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20230302161543.286002-9-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Following corner case wasn't covered:
-device pcie-root-port,id=NO_HOTPLUG,hotplug=off
-device pcie-root-port,bus=NO_HOTPLUG
when intermediate root-port has explicitly disabled hotplug,
all hierarchy below it is not described anymore (used to be
described in 7.2)
So as result we see only NO_HOTPLUG root-port described
+ Device (S50)
+ {
+ Name (_ADR, 0x000A0000) // _ADR: Address
+ }
and no children nor notification chain for them are being composed.
Follow up patches will fix missing leaf root-port descriptor
and notification chain that should accompany it.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20230302161543.286002-7-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20230302161543.286002-6-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
expected changes:
Basically adds devices present on root bus in form:
Device (SXX)
{
Name (_ADR, 0xYYYYYYYY) // _ADR: Address
}
On top of that For q35.noacpihp, all ACPI PCI hotplug
AML is removed and _OSC get native hotplug enabled:
CreateDWordField (Arg3, 0x04, CDW2)
CreateDWordField (Arg3, 0x08, CDW3)
Local0 = CDW3 /* \_SB_.PCI0._OSC.CDW3 */
- Local0 &= 0x1E
+ Local0 &= 0x1F
If ((Arg1 != One))
{
CDW1 |= 0x08
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20230302161543.286002-5-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
test bridge AML generator with ACPI PCI hotplug disabled
(i.e. with native hotplug enabled/disabled per bridge/root port)
PS:
while at make sure that devices on pci-bridge are starting
from addr=1.0 as slot 0 is not available there and test
passes only because of a bug in ACPI hotplug that will be
fixed by follow up patch
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20230302161543.286002-4-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
for q35.noacpihp use plain default Q35 DSDT table as a starting point.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20230302161543.286002-3-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This reverts commit c471eb4f40445908c1be7bb11a37ac676a0edae7.
which broke acpi tables test and rebuild due to skipping some tests
even thought none of devices tests depend on weren't disabled.
As result it leads to some expected tables not being updated,
merge conflicts and tests failure.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20230302161543.286002-2-imammedo@redhat.com>
Acked-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
migration-test has been flaky for a long time, both in CI and
otherwise:
https://gitlab.com/qemu-project/qemu/-/jobs/3806090216
(a FreeBSD job)
32/648 ERROR:../tests/qtest/migration-helpers.c:205:wait_for_migration_status: assertion failed: (g_test_timer_elapsed() < MIGRATION_STATUS_WAIT_TIMEOUT) ERROR
on a local macos x86 box:
▶ 34/621 ERROR:../../tests/qtest/migration-helpers.c:151:migrate_query_not_failed: assertion failed: (!g_str_equal(status, "failed")) ERROR
34/621 qemu:qtest+qtest-i386 / qtest-i386/migration-test ERROR 168.12s killed by signal 6 SIGABRT
――――――――――――――――――――――――――――――――――――― ✀ ―――――――――――――――――――――――――――――――――――――
stderr:
qemu-system-i386: Failed to peek at channel
query-migrate shows failed migration: Unable to write to socket: Broken pipe
**
ERROR:../../tests/qtest/migration-helpers.c:151:migrate_query_not_failed: assertion failed: (!g_str_equal(status, "failed"))
(test program exited with status code -6)
――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――
▶ 37/621 ERROR:../../tests/qtest/migration-helpers.c:151:migrate_query_not_failed: assertion failed: (!g_str_equal(status, "failed")) ERROR
37/621 qemu:qtest+qtest-x86_64 / qtest-x86_64/migration-test ERROR 174.37s killed by signal 6 SIGABRT
――――――――――――――――――――――――――――――――――――― ✀ ―――――――――――――――――――――――――――――――――――――
stderr:
query-migrate shows failed migration: Unable to write to socket: Broken pipe
**
ERROR:../../tests/qtest/migration-helpers.c:151:migrate_query_not_failed: assertion failed: (!g_str_equal(status, "failed"))
(test program exited with status code -6)
In the cases where I've looked at the underlying log, this seems to
be in the migration/multifd/tcp/plain/cancel subtest. Disable that
specific subtest by default until somebody can track down the
underlying cause. Enthusiasts can opt back in by setting
QEMU_TEST_FLAKY_TESTS=1 in their environment.
We might need to disable more parts of this test if this isn't
sufficient to fix the flakiness.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Message-id: 20230302172211.4146376-1-peter.maydell@linaro.org
* fix for the Aspeed I2C slave mode
* a new I2C echo device from Klaus and its associated test in avocado.
* initial SoC cleanups to allow the use of block devices instead of
drives on the command line.
* new facebook machines and eeprom fixes for the Fuji
* readline fix
-----BEGIN PGP SIGNATURE-----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=ExnJ
-----END PGP SIGNATURE-----
Merge tag 'pull-aspeed-20230302' of https://github.com/legoater/qemu into staging
aspeed queue:
* fix for the Aspeed I2C slave mode
* a new I2C echo device from Klaus and its associated test in avocado.
* initial SoC cleanups to allow the use of block devices instead of
drives on the command line.
* new facebook machines and eeprom fixes for the Fuji
* readline fix
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEEoPZlSPBIlev+awtgUaNDx8/77KEFAmQAnrQACgkQUaNDx8/7
# 7KGIvQ//Te2eSxlZNxAXHb3HSVFRaBW+2EkJzNlalX75olFSzCLe8BnAHK5xPlYv
# JjU0aPjWaPohPLdbNbAsJY2B8AwMGbUTjSv+ORRWF6s97LTVD9WcAYHgOTCz6d2X
# ZrArJ5msEQAFEySOLmBqTcuyW3t4w8XeII+B09HZIS8Gn3F9kX5+4JCw9E4sX8fS
# n9ayclMmrXCPbkGA4bfwJp3KI1Tc/WXNRyG0AmPEmepid7ECr5tVvQoXRMF1Sy/D
# 10qbHEcmQXvZDy85M2ED1niOac4oU+EY8Wvjzkgc36uXcjqf0jIUfw56cwGSNVkW
# MhPXSMiH4tEjgxmtzld3LeA6TGfrFcCvRXYiCuYWHjBS3gptlqY6Q0580vxoQVXL
# lTYui57LB1YStNLcLG9toP0d4/fRfeqEx7ddCQKlopnW/K392eoJo0aYoVGVJhIC
# 3QhN525EFUwMm4FDpdSW29Gfbk/ytpf0u4hQ6JPeBl8psirRKqCGuwr5NOnPYTaN
# yErlsq2eL83t9kLo+2YIqgWic85wNP3kqAjIaE6lminqX7sWFH3V1g9HqUQZVG1g
# msatZMiCCvwSFuz3DPkSfnuhqwaHuhvCATZloCtguCmnbUK9qUVVzvodKw62sZrd
# GdS2XvRNyoOwezz0tDEvPipyZ7RpcaatryHNuzGwRsE5Lvr73dg=
# =ExnJ
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 02 Mar 2023 13:03:48 GMT
# gpg: using RSA key A0F66548F04895EBFE6B0B6051A343C7CFFBECA1
# gpg: Good signature from "Cédric Le Goater <clg@kaod.org>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: A0F6 6548 F048 95EB FE6B 0B60 51A3 43C7 CFFB ECA1
* tag 'pull-aspeed-20230302' of https://github.com/legoater/qemu:
aspeed/smc: Replace SysBus IRQs with GPIO lines
aspeed: Add a boot_rom overlap region in the SoC spi_boot container
aspeed: Introduce a spi_boot region under the SoC
aspeed/fuji : correct the eeprom size
hw/at24c : modify at24c to support 1 byte address mode
hw/arm/aspeed: Adding new machine Tiogapass in QEMU
hw/arm/aspeed: Adding new machine Yosemitev2 in QEMU
tests/avocado/machine_aspeed.py: Add an I2C slave test
hw/misc: add a toy i2c echo device
hw/i2c: only schedule pending master when bus is idle
readline: fix hmp completion issue
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
vhost-user support without ioeventfd
word replacements in vhost user spec
shpc improvements
cleanups, fixes all over the place
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmQBO8QPHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRpMUMH/3/FVp4qaF4CDwCHn7xWFRJpOREIhX/iWfUu
lGkwxnB7Lfyqdg7i4CAfgMf2emWKZchEE2DamfCo5bIX0IgRU3DWcOdR9ePvJ29J
cKwIYpxZcB4RYSoWL5OUakQLCT3JOu4XWaXeVjyHABjQhf3lGpwN4KmIOBGOy/N6
0YHOQScW2eW62wIOwhAEuYQceMt6KU32Uw3tLnMbJliiBf3a/hPctVNM9TFY9pcd
UYHGfBx/zD45owf1lTVEQFDg0eqPZKWW29g5haiOd5oAyXHHolzu+bt3bU7lH46b
f7iP12LqDudyrgoF5YWv3NJ4HaGm5V3kPqNqLLF/mjF7alxG+N8=
=hN3h
-----END PGP SIGNATURE-----
Merge tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu into staging
virtio,pc,pci: features, cleanups, fixes
vhost-user support without ioeventfd
word replacements in vhost user spec
shpc improvements
cleanups, fixes all over the place
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# -----BEGIN PGP SIGNATURE-----
#
# iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmQBO8QPHG1zdEByZWRo
# YXQuY29tAAoJECgfDbjSjVRpMUMH/3/FVp4qaF4CDwCHn7xWFRJpOREIhX/iWfUu
# lGkwxnB7Lfyqdg7i4CAfgMf2emWKZchEE2DamfCo5bIX0IgRU3DWcOdR9ePvJ29J
# cKwIYpxZcB4RYSoWL5OUakQLCT3JOu4XWaXeVjyHABjQhf3lGpwN4KmIOBGOy/N6
# 0YHOQScW2eW62wIOwhAEuYQceMt6KU32Uw3tLnMbJliiBf3a/hPctVNM9TFY9pcd
# UYHGfBx/zD45owf1lTVEQFDg0eqPZKWW29g5haiOd5oAyXHHolzu+bt3bU7lH46b
# f7iP12LqDudyrgoF5YWv3NJ4HaGm5V3kPqNqLLF/mjF7alxG+N8=
# =hN3h
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 03 Mar 2023 00:13:56 GMT
# gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg: issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full]
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu: (53 commits)
tests/data/acpi/virt: drop (most) duplicate files.
hw/cxl/mailbox: Use new UUID network order define for cel_uuid
qemu/uuid: Add UUID static initializer
qemu/bswap: Add const_le64()
tests: acpi: Update q35/DSDT.cxl for removed duplicate UID
hw/i386/acpi: Drop duplicate _UID entry for CXL root bridge
tests/acpi: Allow update of q35/DSDT.cxl
hw/cxl: Add CXL_CAPACITY_MULTIPLIER definition
hw/cxl: set cxl-type3 device type to PCI_CLASS_MEMORY_CXL
hw/pci-bridge/cxl_downstream: Fix type naming mismatch
hw/mem/cxl_type3: Improve error handling in realize()
MAINTAINERS: Add Fan Ni as Compute eXpress Link QEMU reviewer
intel-iommu: send UNMAP notifications for domain or global inv desc
smmu: switch to use memory_region_unmap_iommu_notifier_range()
memory: introduce memory_region_unmap_iommu_notifier_range()
intel-iommu: fail DEVIOTLB_UNMAP without dt mode
intel-iommu: fail MAP notifier without caching mode
memory: Optimize replay of guest mapping
chardev/char-socket: set s->listener = NULL in char_socket_finalize
hw/pci: Trace IRQ routing on PCI topology
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When virt ACPI files were added, lots of duplicates were created because
we forgot that there's a no-prefix fallback: e.g. if
tests/data/acpi/virt/APIC.memhp is not there then test will use
tests/data/acpi/virt/APIC.
Drop these.
These were found with
$find tests/data/acpi/ -type f -exec sha256sum '{}' ';'|sort -d|uniq -w 64 --all-repeated=separate
(trick: -d does a dictionary sort so a no-suffix file ends up first).
Note: there are still a bunch of issues with duplicates left even after this.
First pc and q35 are often identical.
Second, sometimes files are identical but not identical to the default
fallback, e.g.
tests/data/acpi/pc/SLIT.cphp and tests/data/acpi/pc/SLIT.memhp
or
tests/data/acpi/q35/HMAT.acpihmat-noinitiator and tests/data/acpi/virt/HMAT.acpihmatvirt
Finding a way to deduplicate these is still a TODO item - softlinks
maybe?
We also need to make rebuild-expected-aml.sh smarter about not creating
these duplicates in the 1st place.
And maybe we should use softlinks instead of relying on a fallback
to make it explicit what version does each test expect?
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Dropping the ID effects this table in trivial fashion.
Reviewed-by: Gregory Price <gregory.price@memverge.com>
Tested-by: Gregory Price <gregory.price@memverge.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20230206172816.8201-8-Jonathan.Cameron@huawei.com>
Reviewed-by: Fan Ni <fan.ni@samsung.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Next patch will drop duplicate _UID entry so allow update.
Reviewed-by: Gregory Price <gregory.price@memverge.com>
Tested-by: Gregory Price <gregory.price@memverge.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20230206172816.8201-6-Jonathan.Cameron@huawei.com>
Reviewed-by: Fan Ni <fan.ni@samsung.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
According to g_tree_foreach() documentation:
"The tree may not be modified while iterating over it (you can't
add/remove items)."
compare_trees()/diff_tree() fail to respect this rule.
Historically GLib2 used a slice allocator for the GTree APIs
which did not immediately release the memory back to the system
allocator. As a result QEMU's use-after-free bug was not visible.
With GLib > 2.75.3 however, GLib2 has switched to using malloc
and now a SIGSEGV can be observed while running test-vmstate.
Get rid of the node removal within the tree traversal. Also
check the trees have the same number of nodes before the actual
diff.
Fixes: 9a85e4b8f6 ("migration: Support gtree migration")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1518
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reported-by: Richard W.M. Jones <rjones@redhat.com>
Tested-by: Richard W.M. Jones <rjones@redhat.com>
Reviewed-by: Richard W.M. Jones <rjones@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
The Aspeed 2600 I2C controller supports a slave mode which can be
tested with the I2C echo device. Test extracted from :
https://lists.nongnu.org/archive/html/qemu-devel/2022-06/msg00183.html
Suggested-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
This test is exceptionally heavyweight (nearly 330s) compared to the
two (both endians) TuxRun baseline tests which complete in under 160s.
The coverage is slightly reduced but a more directed test could make
up the difference.
tests/avocado/tuxrun_baselines.py:TuxRunBaselineTest.test_ppc64:
Overall coverage rate:
lines......: 9.6% (44110 of 458817 lines)
functions..: 16.5% (6767 of 41054 functions)
branches...: 6.0% (13395 of 222634 branches)
tests/avocado/boot_linux.py:BootLinuxPPC64.test_pseries_tcg:
Overall coverage rate:
lines......: 11.6% (53408 of 458817 lines)
functions..: 18.7% (7691 of 41054 functions)
branches...: 7.9% (17692 of 224218 branches)
So lets skip for GITLAB_CI and save a few CI minutes.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230228190653.1602033-25-alex.bennee@linaro.org>
We need this to be able to run the tuxrun_baseline tests in CI which
in turn helps us reduce overhead running other tests. We need to
update libvirt-ci and refresh the generated files by running 'make
lcitool-refresh' to get the new mapping.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230228190653.1602033-24-alex.bennee@linaro.org>
If we build them without the script we can certainly run them without
it.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230228190653.1602033-22-alex.bennee@linaro.org>
We don't really need stuff from docker.py to do the build as we have
everything we need with a direct call. We do rely on the dockerfiles
being able to tweak the UID/name mapping as the last step.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230228190653.1602033-21-alex.bennee@linaro.org>
These are flat but not generated by lcitool so we need to manually
update them with the `useradd` stanza.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230228190653.1602033-20-alex.bennee@linaro.org>
For the cross-compilation use-case it is important to add the host
user to the dockerfile so we can map them to the docker environment
when cross-building files.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20230228190653.1602033-19-alex.bennee@linaro.org>
These two tests were failing with this error:
stderr:
TAP parsing error: version number must be on the first line
[...]
Unknown TAP version. The first line MUST be `TAP version <int>`. Assuming version 12.
This can be fixed by ensuring we always call g_test_init first in the
body of main.
Thanks: Daniel Berrange, for diagnosing the problem
Signed-off-by: Richard W.M. Jones <rjones@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alexander Bulekov <alxndr@bu.edu>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Message-Id: <20230227174019.1164205-1-rjones@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230228190653.1602033-17-alex.bennee@linaro.org>
We use the debian release number elsewhere so fix it for consistency
along with the broken comment.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20230228190653.1602033-15-alex.bennee@linaro.org>
since binutils is pretty old, it fails our CI repeatedly during the
compilation of tricore-binutils. We created a precompiled version using
the debian docker image and download it instead of building it ourself.
We also updated the package to include a newer version of binutils, gcc,
and newlib. The default TriCore ISA version used by tricore-as changed
from the old version, so we have to specify it now. If we don't
'test_fadd' fails with 'unknown opcode'.
The new assembler also picks a new encoding in ld.h which fails the
'test_ld_h' test. We fix that by using the newest TriCore CPU for QEMU.
The old assembler accepted an extra ')' in 'test_imask'. The new one
does not, so lets remove it.
Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Message-Id: <20230209145812.46730-1-kbastian@mail.uni-paderborn.de>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230228190653.1602033-12-alex.bennee@linaro.org>
The TuxRun project (www.tuxrun.org) uses QEMU to run tests on a wide
variety of kernel configurations on wide range of our emulated
platforms. They publish a known good set of images at:
https://storage.tuxboot.com/
to help with bisecting regressions in either the kernel, firmware or
QEMU itself. The tests are pretty lightweight as they contain just a
kernel with a minimal rootfs which boots a lot faster than most of the
distros. In time they might be persuaded to version their known good
baselines and we can then enable proper checksums.
For a couple of tests we currently skip:
- mips64, a regression against previous stable release
- sh4, very unstable with intermittent oops
Total run time: 340s (default) -> 890s (debug)
Overall coverage rate (tested targets + disabled tests):
lines......: 16.1% (126894 of 789848 lines)
functions..: 20.6% (15954 of 77489 functions)
branches...: 9.3% (40727 of 439365 branches)
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Cc: Anders Roxell <anders.roxell@linaro.org>
Acked-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230228190653.1602033-11-alex.bennee@linaro.org>
It is buggy and keeps failing.
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230228190653.1602033-10-alex.bennee@linaro.org>
The 22.04 LTS release has been out for almost a year now so its time
to update all the remaining images to the current LTS. We can also
drop some hacks we need for older clang TSAN support.
We will keep the ubuntu2004 container around for those who wish to
test builds on the currently still supported baseline.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230228190653.1602033-9-alex.bennee@linaro.org>
As we like to run tests under CI with V=1 flags the softfloat tests
can add up to a fair amount of extra log lines. With an update to the
testfloat library we can now call fp-test with the -q flag and reduce
the output to a terse one line per function tested.
make check-softfloat V=1 | wc -l
759
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230228190653.1602033-5-alex.bennee@linaro.org>
When we re-factored we dropped the unlink() step which turns out to be
required for rmdir to do its thing. If we had been checking the return
value we would have noticed so lets do that with this fix.
Fixes: 68406d1085 (tests/unit: cleanups for test-io-channel-command)
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Suggested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230228190653.1602033-4-alex.bennee@linaro.org>
We only use it for test-io-channel-command at the moment.
Unfortunately bringing socat into CI exposed an existing bug in the
test-io-channel-command unit test so we disabled it for MacOS in the
previous patch.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Cc: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20230228190653.1602033-3-alex.bennee@linaro.org>
In preparation for the next patch when we enable socat for our CI
images we need to disable this part of the test for MacOS. The bug has
been raised here:
https://gitlab.com/qemu-project/qemu/-/issues/1495
Once that is fixed we should re-enable the test.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230228190653.1602033-2-alex.bennee@linaro.org>
Specifically add listing, injection of event channels.
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Paul Durrant <paul@xen.org>
- Various header cleaned up (removing pointless headers)
- Mark various files/code user/system specific
- Make various objects target-independent
- Remove tswapN() calls from dump.o
- Suggest g_assert_not_reached() instead of assert(0)
- qdev / qom
- Replace various container_of() by QOM cast macros
- Declare some QOM macros using OBJECT_DECLARE_TYPE()
- Embed OHCI QOM child in SM501 chipset
- hw (ISA & IDE)
- add some documentation, improve function names
- un-inline, open-code few functions
- have ISA API accessing IRQ/DMA prefer ISABus over ISADevice
- Demote IDE subsystem maintenance to "Odd Fixes"
- ui: Improve Ctrl+Alt hint on Darwin Cocoa
-----BEGIN PGP SIGNATURE-----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=AV/+
-----END PGP SIGNATURE-----
Merge tag 'buildsys-qom-qdev-ui-20230227' of https://github.com/philmd/qemu into staging
- buildsys
- Various header cleaned up (removing pointless headers)
- Mark various files/code user/system specific
- Make various objects target-independent
- Remove tswapN() calls from dump.o
- Suggest g_assert_not_reached() instead of assert(0)
- qdev / qom
- Replace various container_of() by QOM cast macros
- Declare some QOM macros using OBJECT_DECLARE_TYPE()
- Embed OHCI QOM child in SM501 chipset
- hw (ISA & IDE)
- add some documentation, improve function names
- un-inline, open-code few functions
- have ISA API accessing IRQ/DMA prefer ISABus over ISADevice
- Demote IDE subsystem maintenance to "Odd Fixes"
- ui: Improve Ctrl+Alt hint on Darwin Cocoa
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEE+qvnXhKRciHc/Wuy4+MsLN6twN4FAmP9IeAACgkQ4+MsLN6t
# wN7bdQ//SxJYJuQvqTT6s+O0LmP6NbqvhxCXX7YAwK2jCTM+zTgcqqRZCcisLQol
# 3ENu2UhnZmiLKHSOxatOVozbws08/u8Vl+WkW4UTMUb1yo5KPaPtq808Y95RdAJB
# 7D7B5juDGnFRAHXZz38zVk9uIuEkm+Po/pD0JQa+upBtAAgOJTqGavDNSR5+T0Yl
# VjGdwK0b10skPqiF6OABYoy/4IFHVJJFIbARZh+a7hrF0llsbzUts5JiYsOxEEHQ
# t3woUItdMnS1m0+Ty4AQ8m0Yv9y4HZOIzixvsZ+vChj5ariwUhL9/7wC/s/UCYEg
# gKVA5X8R6n/ME6DScK99a+CyR/MXkz70b/rOUZxoutXhV3xdh4X1stL4WN9W/m3z
# D4i4ZrUsDUcKCGWlj49of/dKbOPwk1+e/mT0oDZD6JzG0ODjfdVxvJ/JEV2iHgS3
# WqHuSKzX/20H9j7/MgfbQ0HjBFOQ8tl781vQzhD+y+cF/IiTsHhrE6esIWho4bob
# kfSdVydUWWRnBsnyGoRZXoEMX9tn+pu0nKxEDm2Bo2+jajsa0aZZPokgjxaz4MnD
# Hx+/p1E+8IuOn05JgzQSgTJmKFdSbya203tXIsTo1kL2aJTJ6QfMvgEPP/fkn+lS
# oQyVBFZmb1JDdTM1MxOncnlWLg74rp/CWEc+u5pSdbxMO/M/uac=
# =AV/+
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 27 Feb 2023 21:34:24 GMT
# gpg: using RSA key FAABE75E12917221DCFD6BB2E3E32C2CDEADC0DE
# gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: FAAB E75E 1291 7221 DCFD 6BB2 E3E3 2C2C DEAD C0DE
* tag 'buildsys-qom-qdev-ui-20230227' of https://github.com/philmd/qemu: (125 commits)
ui/cocoa: user friendly characters for release mouse
dump: Add create_win_dump() stub for non-x86 targets
dump: Simplify compiling win_dump.o by introducing win_dump_available()
dump: Clean included headers
dump: Replace TARGET_PAGE_SIZE -> qemu_target_page_size()
dump: Replace tswapN() -> cpu_to_dumpN()
hw/ide/pci: Add PCIIDEState::isa_irq[]
hw/ide/via: Replace magic 2 value by ARRAY_SIZE / MAX_IDE_DEVS
hw/ide/piix: Refactor pci_piix_init_ports as pci_piix_init_bus per bus
hw/ide/piix: Pass Error* to pci_piix_init_ports() for better error msg
hw/ide/piix: Remove unused includes
hw/ide/pci: Unexport bmdma_active_if()
hw/ide/ioport: Remove unnecessary includes
hw/ide: Declare ide_get_[geometry/bios_chs_trans] in 'hw/ide/internal.h'
hw/ide: Rename idebus_active_if() -> ide_bus_active_if()
hw/ide: Rename ide_init2() -> ide_bus_init_output_irq()
hw/ide: Rename ide_exec_cmd() -> ide_bus_exec_cmd()
hw/ide: Rename ide_register_restart_cb -> ide_bus_register_restart_cb
hw/ide: Rename ide_create_drive() -> ide_bus_create_drive()
hw/ide: Rename ide_set_irq() -> ide_bus_set_irq()
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
ICH9 is a south bridge which doesn't necessarily depend on x86, so move
it into the southbridge folder, analoguous to PIIX.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230213173033.98762-13-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20221219170806.60580-6-philmd@linaro.org>
replay API is used deeply within TCG common code (common to user
and system emulation). Unfortunately "sysemu/replay.h" requires
some QAPI headers for few system-specific declarations, example:
void replay_input_event(QemuConsole *src, InputEvent *evt);
Since commit c2651c0eaa ("qapi/meson: Restrict UI module to system
emulation and tools") the QAPI header defining the InputEvent is
not generated anymore.
To keep it simple, extract the 'core' replay prototypes to a new
"exec/replay-core.h" header which we include in the TCG code that
doesn't need the rest of the replay API.
Reviewed-by: Pavel Dovgalyuk <Pavel.Dovgalyuk@ispras.ru>
Message-Id: <20221219170806.60580-5-philmd@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
