Zero out tcg_ctx.gen_opc_instr_start for instructions representing the
last guest opcode in the TB.
Cc: qemu-stable@nongnu.org
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Refactor common code around calls to cpu_restore_state().
tb_find_pc() has now no external users, make it static.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
With MMU option xtensa architecture has two TLBs: ITLB and DTLB. ITLB is
only used for code access, DTLB is only for data. However TLB entries in
both TLBs have attribute field controlling write and exec access. These
bits need to be properly masked off depending on TLB type before being
used as tlb_set_page prot argument. Otherwise the following happens:
(1) ITLB entry for some PFN gets invalidated
(2) DTLB entry for the same PFN gets updated, attributes allow code
execution
(3) code at the page with that PFN is executed (possible due to step 2),
entry for the TB is written into the jump cache
(4) QEMU TLB entry for the PFN gets replaced with an entry for some
other PFN
(5) code in the TB from step 3 is executed (possible due to jump cache)
and it accesses data, for which there's no DTLB entry, causing DTLB
miss exception
(6) re-translation of the TB from step 5 is attempted, but there's no
QEMU TLB entry nor xtensa ITLB entry for that PFN, which causes ITLB
miss exception at the TB start address
(7) ITLB miss exception is handled by the guest, but execution is
resumed from the beginning of the faulting TB (the point where ITLB
miss occured), not from the point where DTLB miss occured, which is
wrong.
With that fix the above scenario causes ITLB miss exception (that used
to be step 7) at step 3, right at the beginning of the TB.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Use movcond for all sorts of conditional moves, ABS, CLAMPS, MIN/MAX
opcodes.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
The Miscellaneous Special Registers Option provides zero to four scratch
registers within the processor readable and writable by RSR, WSR, and
XSR. These registers are privileged. They may be useful for some
application-specific exception and interrupt processing tasks in the
kernel. The MISC registers are undefined after reset.
See ISA, 4.7.3 for details.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
There are read-only (DEBUGCAUSE, PRID) and write-only (INTCLEAR) SRs,
and INTERRUPT/INTSET SR allows rsr/wsr, but not xsr. Raise illeagal
opcode exception on illegal access to these SRs.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Beginning with the RA-2004.1 release, SR access instructions (rsr, wsr,
xsr) are associated with their corresponding SR and raise illegal opcode
exception in case the register is not configured for the core.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
In XEA1, the Options for Memory Protection and Translation and the
corresponding TLB management instructions are not available. Instead,
functionality similar to the Region Protection Option is available
through the cache attribute register. See ISA, A.2.14 for details.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
ATOMCTL SR controls s32c1i opcode behavior depending on targeted memory
type. See ISA, 4.3.12.4 for details.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Pass around CPUArchState instead of using global cpu_single_env.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Acked-by: Max Filippov <jcmvbkbc@gmail.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
For target-mips also change the return type to bool.
Make include paths for cpu-qom.h consistent for alpha and unicore32.
Signed-off-by: Andreas Färber <afaerber@suse.de>
[AF: Updated new target-openrisc function accordingly]
Acked-by: Richard Henderson <rth@twiddle.net> (for alpha)
Rename helper flags to the new ones. This is purely a mechanical change,
it's possible to use better flags by looking at the helpers.
Cc: Max Filippov <jcmvbkbc@gmail.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
target_phys_addr_t is unwieldly, violates the C standard (_t suffixes are
reserved) and its purpose doesn't match the name (most target_phys_addr_t
addresses are not target specific). Replace it with a finger-friendly,
standards conformant hwaddr.
Outstanding patchsets can be fixed up with the command
git rebase -i --exec 'find -name "*.[ch]"
| xargs s/target_phys_addr_t/hwaddr/g' origin
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Now that "and" with 0xff, 0xffff and 0xffffffff and "shr" with 0 shift
are optimized in tcg/tcg-op.h there is no need to do it in
target-xtensa/translate.c.
Acked-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
For all targets that currently call tcg_gen_debug_insn_start,
add CPU_LOG_TB_OP_OPT to the condition that gates it.
This is useful for comparing optimization dumps, when the
pre-optimization dump is merely noise.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
In case Coprocessor Context option is enabled CPENABLE SR bits control
whether access to coprocessors is allowed or would rise one of
CoprocessorXDisabled exceptions.
See ISA, 4.4.5 for more details.
FP is coprocessor 0.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
These are comparison and conditional move opcodes.
See ISA, 4.3.10 for more details.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
These are FP to integer and integer to FP conversion opcodes.
See ISA, 4.3.10 for more details.
Note that ISA description for utrunc.s is currently incorrect and will
be fixed in future revisions.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
These are FP arithmetic opcodes.
See ISA, 4.3.10 for more details.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
These are load/store instructions for FP registers with immediate or
register index and optional base post-update.
See ISA, 4.3.10 for more details.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
There are 16 32-bit FP registers (f0 - f15), control and status user
registers (fcr, fsr).
See ISA, 4.3.10 for more details.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Unconditional gen_check_loop_end at the end of disas_xtensa_insn
can emit tcg_gen_goto_tb with slot id already used in the TB (e.g. when
TB ends at LEND with a branch).
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Cc: qemu-stable <qemu-stable@nongnu.org>
Signed-off-by: malc <av1474@comtv.ru>
Put the following errno value mappings under #ifdef:
xtensa-semi.c: In function 'errno_h2g':
xtensa-semi.c:113: error: 'ENOTBLK' undeclared (first use in this function)
xtensa-semi.c:113: error: (Each undeclared identifier is reported only once
xtensa-semi.c:113: error: for each function it appears in.)
xtensa-semi.c:113: error: array index in initializer not of integer type
xtensa-semi.c:113: error: (near initialization for 'guest_errno')
xtensa-semi.c:124: error: 'ETXTBSY' undeclared (first use in this function)
xtensa-semi.c:124: error: array index in initializer not of integer type
xtensa-semi.c:124: error: (near initialization for 'guest_errno')
xtensa-semi.c:134: error: 'ELOOP' undeclared (first use in this function)
xtensa-semi.c:134: error: array index in initializer not of integer type
xtensa-semi.c:134: error: (near initialization for 'guest_errno')
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Guest errno values are taken from the newlib. Convert only those errno
values that can be returned from used system calls.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
This prevents guest from proceeding with uninitialised garbage returned
from unimplemented simcalls.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
* 'x86cpu_qom_tcg_v2' of git://github.com/imammedo/qemu:
target-i386: move tcg initialization into x86_cpu_initfn()
cleanup cpu_set_debug_excp_handler
target-xtensa: drop usage of prev_debug_excp_handler
target-i386: drop usage of prev_debug_excp_handler
This makes usable default for -cpu option both for qemu-system-xtensa
and qemu-system-xtensaeb fixing the following error:
$ qemu-system-xtensaeb -M sim
Unable to find CPU definition
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Tested-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Quote from ISA, 2.1:
For most Xtensa instructions, bit numbering is irrelevant; only the BBC
and BBS instructions assign bit numbers to values on which the processor
operates. The BBC/BBS instructions use big-endian bit ordering (0 is the
most-significant bit) on a big-endian processor configuration.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Chains of exception handlers are currently unused feature. Dropping it
to be consistent with target-i386 but it may simplify qom-ifying CPU
in future like for target-i386.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Add env parameter to every helper function that needs it, update
'configure' script.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Mark exception generating functions 'noreturn' and pure constant
functions as such.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Peter Portante <peter.portante@redhat.com>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Taken conditional branches fail to update CCOUNT register because
accumulated ccount_delta is reset during translation of non-taken
branch. To fix it only update CCOUNT once per conditional branch
instruction translation.
This fixes guest linux freeze on LTP waitpid06 test.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Hardware pagetable walking may not be nested. Stop guessing and pass
explicit flag to the get_physical_addr_mmu function that controls page
table lookup.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
This is to avoid interference of internal QEMU helpers
(cpu_get_phys_page_debug, tb_invalidate_virtual_addr) with guest-visible
TLB state.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
According to ISA, 4.4.2.6, EXCVADDR may be changed by any TLB miss, even
if the miss is handled entirely by processor hardware.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Both old and new mappings need flushing because their VPN may be
different in MMU case.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
