Currently "cf-core.xml" is sent to GDB when using any m68k flavor. Thing is
it uses the "org.gnu.gdb.coldfire.core" feature name and gdb 8.3 then expects
a coldfire FPU instead of the default m68881 FPU.
This is not OK because the m68881 floats registers are 96 bits wide so it
crashes GDB with the following error message:
(gdb) target remote localhost:7960
Remote debugging using localhost:7960
warning: Register "fp0" has an unsupported size (96 bits)
warning: Register "fp1" has an unsupported size (96 bits)
...
Remote 'g' packet reply is too long (expected 148 bytes, got 180 bytes): \
00000000000[...]0000
With this patch: qemu-system-m68k -M none -cpu m68020 -s -S
(gdb) tar rem :1234
Remote debugging using :1234
warning: No executable has been specified and target does not support
determining executable automatically. Try using the "file" command.
0x00000000 in ?? ()
(gdb) p $fp0
$1 = nan(0xffffffffffffffff)
Signed-off-by: KONRAD Frederic <frederic.konrad@adacore.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <1588094279-17913-3-git-send-email-frederic.konrad@adacore.com>
Message-Id: <20200430190122.4592-10-alex.bennee@linaro.org>
As gdb will generally be talking to "foreign" guests lets use that if
we can. Otherwise the chances of gdb barfing are considerably higher.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200430190122.4592-2-alex.bennee@linaro.org>
It seems on some compilers the test can pass but still give you
broken binaries.
Fixes: d2cd29e307
Fixes: https://bugs.launchpad.net/qemu/+bug/1871798
Cc: Bug 1871798 <1871798@bugs.launchpad.net>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Howard Spoelstra <hsp.cat7@gmail.com>
Tested-by: James Le Cuirot <chewi@aura-online.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200414200631.12799-9-alex.bennee@linaro.org>
Otherwise it's hard to debug whats going on.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200414200631.12799-8-alex.bennee@linaro.org>
If we are not making warnings fatal for compilation, make them
non-fatal when building the Sphinx documentation also. (For instance
Sphinx 3.0 warns about some constructs that older versions were happy
with, which is a build failure if we use the warnings-as-errors
flag.)
This provides a workaround at least for LP:1872113.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200411182934.28678-2-peter.maydell@linaro.org
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Without -Werror, the probe may succeed, but then compilation fails
later when -Werror is added for other reasons. Shows up on windows,
where the compiler complains about -fPIC.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200401214756.6559-1-richard.henderson@linaro.org>
Message-Id: <20200403191150.863-13-alex.bennee@linaro.org>
Recent toolchains support static and pie at the same time.
As with normal dynamic builds, allow --static to default to PIE
if supported by the toolchain. Allow --enable/--disable-pie to
override the default.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
---
v2: Fix --disable-pie --static
v3: Update for QEMU_LDFLAGS.
Some distributions, e.g. Ubuntu 19.10, enable PIE by default.
If for some reason one wishes to build a non-pie binary, we
must provide additional options to override.
At the same time, reorg the code to an elif chain.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
---
v3: Update for QEMU_LDFLAGS.
There is nothing about these options that is related to PIE.
Use them unconditionally.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Fangrui Song <i@maskray.me>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
---
v2: Do not split into two tests.
v3: Update to QEMU_LDFLAGS.
The CFLAGS_NOPIE and LDFLAGS_NOPIE variables are used
in pc-bios/optionrom/Makefile, which has nothing to do
with the PIE setting of the main qemu executables.
This overrides any operating system default to build
all executables as PIE, which is important for ROMs.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
PIE is supported on many other hosts besides x86.
The default for non-x86 is now the same as x86: pie is used
if supported, and may be forced via --enable/--disable-pie.
The original commit (40d6444e91) said:
"Non-x86 are not changed, as they require TCG changes"
but I think that's wrong -- there's nothing about PIE that
affects TCG one way or another.
Tested on aarch64 (bionic) and ppc64le (centos 7) hosts.
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This adjustment was random and unnecessary. The user mode
startup code in probe_guest_base() will choose a value for
guest_base that allows the host qemu binary to not conflict
with the guest binary.
With modern distributions, this isn't even used, as the default
is PIE, which does the same job in a more portable way.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
---
v2: Remove mention of config-host.ld from make distclean
While debugging check-acceptance failures I found an instability in
the mips64el test case. Briefly the test case:
retry.py -n 100 -c -- ./mips64el-softmmu/qemu-system-mips64el \
-display none -vga none -serial mon:stdio \
-machine malta -kernel ./vmlinux-4.7.0-rc1.I6400 \
-cpu I6400 -smp 8 -vga std \
-append "printk.time=0 clocksource=GIC console=tty0 console=ttyS0 panic=-1" \
--no-reboot
Reports about a 9% failure rate:
Results summary:
0: 91 times (91.00%), avg time 5.547 (0.45 varience/0.67 deviation)
-6: 9 times (9.00%), avg time 3.394 (0.02 varience/0.13 deviation)
Ran command 100 times, 91 passes
When re-run with "--accel tcg,thread=single" the instability goes
away.
Results summary:
0: 100 times (100.00%), avg time 17.318 (249.76 varience/15.80 deviation)
Ran command 100 times, 100 passes
Which seems to indicate there is some aspect of the MIPS MTTCG fixes
that has been missed. Ideally we would fix that but I'm afraid I don't
have time to investigate and am not super familiar with the
architecture anyway. In lieu of someone tracking down the failure lets
disable it for now.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Aleksandar Markovic <aleksandar.qemu.devel@gmail.com>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: Aleksandar Rikalo <aleksandar.rikalo@rt-rk.com>
Message-Id: <20200323161514.23952-7-alex.bennee@linaro.org>
This patch fixes two problems:
- it cleanups linux-user variants (for instance ppc64-linux-user
and ppc64le-linux-user)
- it removes the .o file when it removes the .d file, otherwise the .o
file is never updated
Fixes: 5f29856b85 ("linux-user, configure: improve syscall_nr.h dependencies checking")
Fixes: 4d6a835dea ("linux-user: introduce parameters to generate syscall_nr.h")
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200325075757.1959961-1-laurent@vivier.eu>
This is mostly a fix for in-tree build.
It removes errors on .d directories:
grep: ./.gitlab-ci.d: Is a directory
grep: ./scripts/qemu-guest-agent/fsfreeze-hook.d: Is a directory
and improves performance by only checking <ARCH>-linux-user directories.
Reported-by: BALATON Zoltan <balaton@eik.bme.hu>
Tested-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200323114116.163609-1-laurent@vivier.eu
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Copy syscall_n32.tbl, syscall_n64.tbl and syscallhdr.sh from
linux/arch/parisc/kernel/syscalls v5.5
Update syscallhdr.sh to generate QEMU syscall_nr.h
Move the offsets (6000 for n32 and 5000 for n64) from the file to
the Makefile.objs to be passed to syscallhdr.sh
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Message-Id: <20200310103403.3284090-18-laurent@vivier.eu>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Copy syscall.tbl and syscallhdr.sh from linux/arch/mips/kernel/syscalls/syscall_o32.tbl v5.5
Update syscallhdr.sh to generate QEMU syscall_nr.h
Move the offset (4000) from the file to the Makefile.objs to be passed
to syscallhdr.sh
Rename on the fly fadvise64 to fadvise64_64.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Message-Id: <20200310103403.3284090-17-laurent@vivier.eu>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Copy syscall.tbl and syscallhdr.sh from linux/arch/ppc/kernel/syscalls v5.5
Update syscallhdr.sh to generate QEMU syscall_nr.h
and to not generate the entry if entry point is sys_ni_syscall.
Fix ppc/signal.c to define do_sigreturn() for TARGET_ABI32.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Message-Id: <20200310103403.3284090-10-laurent@vivier.eu>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Copy syscall.tbl and syscallhdr.sh from linux/arch/arm/tools/syscalls v5.5
Update syscallhdr.sh to generate QEMU syscall_nr.h
Update syscall.c to manage TARGET_NR_arm_sync_file_range as it has
replaced TARGET_NR_sync_file_range2
Move existing stuff from linux-user/Makefile.objs to
linux-user/arm/Makefile.objs
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200310103403.3284090-9-laurent@vivier.eu>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
This will be used when we'll import syscall.tbl from the kernel
Add a script to remove all the dependencies to syscall_nr.h
that point to source directory and not to the build directory.
The list of arch will be update while the generated files are added.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Message-Id: <20200310103403.3284090-2-laurent@vivier.eu>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
architecture emulation, developed by Yoshinori Sato.
CI jobs results:
https://gitlab.com/philmd/qemu/pipelines/127886344https://travis-ci.org/github/philmd/qemu/builds/664579420
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEE+qvnXhKRciHc/Wuy4+MsLN6twN4FAl50mpQACgkQ4+MsLN6t
wN62zw//Y3ZRo9wYFIeILtDJzIzLRuZwmF1lN7j6o15gdwyjWjn08N4wsM/kyPPH
hdF6faWYIoiAaxe5IHzI4dxhH+Mv6zyae1gpOVOAO4TzF1HNpdILrCBvQbJQu2lF
jpqXBDeaa/4ugniANzSTVhCcelIdIoI56rV+E3hzgdoDxOrveA1m0NUGMGzSayEh
xT+y/oaTfmgJHI9GBwSJFVTrI1+jMp6VnrOv5I0pZrE55g1IiZ0TTK12JheQMFvS
98MHFZ1PiKIJEVzEQTBra0T8hbTsZLETn35mOgt9Kf3YRN4Cgqel6gFGlgtXUs5z
8u+pVDb8cK4+hcyFs0FLtUqWO+SXMF215zT23ra/ebhcC2pQRVHlqOjlI85aaJnf
7VfLJFMd3U4tl/yqbkcmkkjc1zl0IQjaa2mLaS+xstWAXGEqeP8EGdhIIzxtHBgQ
1RgHzjbTYMenCisUwzvH9+I7Wc9LB8Vik1UrebbCju99zwt/cIG3FSlleSiuKbtX
U5prRyBw4xyIe1IwcBUcuEBtibD473eBP/m2nF6TorHE0rH1X0n644aHSlTZhGoM
G/GvMZ45zHGlOouqYHX81vzR/WfRBYNiFcXHkJ0Im4zkvpXEnsvoTei9wt2QQ1Wi
YyHKxQUQo8OvBHR4QMUXbS2XVR0tv43NtDiR4mz+vhjC7eDCVc8=
=mNmV
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/philmd-gitlab/tags/target_renesas_rx-20200320' into staging
Introduce the architectural part of the Renesas RX
architecture emulation, developed by Yoshinori Sato.
CI jobs results:
https://gitlab.com/philmd/qemu/pipelines/127886344https://travis-ci.org/github/philmd/qemu/builds/664579420
# gpg: Signature made Fri 20 Mar 2020 10:27:32 GMT
# gpg: using RSA key FAABE75E12917221DCFD6BB2E3E32C2CDEADC0DE
# gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" [full]
# Primary key fingerprint: FAAB E75E 1291 7221 DCFD 6BB2 E3E3 2C2C DEAD C0DE
* remotes/philmd-gitlab/tags/target_renesas_rx-20200320:
Add rx-softmmu
target/rx: Dump bytes for each insn during disassembly
target/rx: Collect all bytes during disassembly
target/rx: Emit all disassembly in one prt()
target/rx: Use prt_ldmi for XCHG_mr disassembly
target/rx: Replace operand with prt_ldmi in disassembler
target/rx: Disassemble rx_index_addr into a string
target/rx: RX disassembler
target/rx: CPU definitions
target/rx: TCG helpers
target/rx: TCG translation
MAINTAINERS: Add entry for the Renesas RX architecture
hw/registerfields.h: Add 8bit and 16bit register macros
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
[PMD: Squashed patches from Richard Henderson modifying
qapi/common.json and tests/machine-none-test.c]
Message-Id: <20200224141923.82118-21-ysato@users.sourceforge.jp>
[PMD: Added @since 5.0 tag in SysEmuTarget]
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
- docker updates for VirGL
- re-factor gdbstub for static GDBState
- re-factor gdbstub for dynamic arrays
- add SVE support to arm gdbstub
- add some guest debug tests to check-tcg
- add aarch64 userspace register tests
- remove packet size limit to gdbstub
- simplify gdbstub monitor code
- report vContSupported in gdbstub to use proper single-step
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAl5xDUIACgkQ+9DbCVqe
KkQwCwf/YtmUsNxxO+CgNctq2u3jV4FoOdQP3bejvmT2+cigKJhQuBlWPg1/YsqF
RDNkmBQx2JaVVMuVmpnwVK1UD+kmYZqrtlOkPNcVrjPmLCq3BVI1LHe6Rjoerx8F
QoZyH0IMNHbBgDo1I46lSFOWcxmOvo+Ow7NX5bPKwlRzf0dyEqSJahRaZLAgUscR
taTtGfk9uQsnxoRsvH/efiQ4bZtUvrEQuhEX3WW/yVE1jTpcb2llwX4xONJb2It3
/0WREGEEIT8PpnWw2S3FH4THY/BjWgz/FPDwNNZYCKBMWDjuG/8KHryd738T9rzo
lkGP9YcXmiyxMMyFFwS8RD3SHr8LvQ==
=Wm+a
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stsquad/tags/pull-testing-and-gdbstub-170320-1' into staging
Testing and gdbstub updates:
- docker updates for VirGL
- re-factor gdbstub for static GDBState
- re-factor gdbstub for dynamic arrays
- add SVE support to arm gdbstub
- add some guest debug tests to check-tcg
- add aarch64 userspace register tests
- remove packet size limit to gdbstub
- simplify gdbstub monitor code
- report vContSupported in gdbstub to use proper single-step
# gpg: Signature made Tue 17 Mar 2020 17:47:46 GMT
# gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [full]
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44
* remotes/stsquad/tags/pull-testing-and-gdbstub-170320-1: (28 commits)
gdbstub: Fix single-step issue by confirming 'vContSupported+' feature to gdb
gdbstub: do not split gdb_monitor_write payload
gdbstub: change GDBState.last_packet to GByteArray
tests/tcg/aarch64: add test-sve-ioctl guest-debug test
tests/tcg/aarch64: add SVE iotcl test
tests/tcg/aarch64: add a gdbstub testcase for SVE registers
tests/guest-debug: add a simple test runner
configure: allow user to specify what gdb to use
tests/tcg/aarch64: userspace system register test
target/arm: don't bother with id_aa64pfr0_read for USER_ONLY
target/arm: generate xml description of our SVE registers
target/arm: default SVE length to 64 bytes for linux-user
target/arm: explicitly encode regnum in our XML
target/arm: prepare for multiple dynamic XMLs
gdbstub: extend GByteArray to read register helpers
target/i386: use gdb_get_reg helpers
target/m68k: use gdb_get_reg helpers
target/arm: use gdb_get_reg helpers
gdbstub: add helper for 128 bit registers
gdbstub: move mem_buf to GDBState and use GByteArray
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
glib's G_DEFINE_AUTOPTR_CLEANUP_FUNC() macro defines several static
inline functions, often with some of them unused, but prior to 2.57.2
did not mark the functions as such. As a result, clang (but not gcc)
fails to build with older glib unless -Wno-unused-function is enabled.
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20200317175534.196295-1-eblake@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
This is useful, especially when testing relatively new gdbstub
features that might not be in distro packages yet.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200316172155.971-22-alex.bennee@linaro.org>
The comment in tcg-runtime-gvec.c about CONFIG_VECTOR16 says that
tcg-op-gvec.c has eliminated size 8 vectors, and only passes on
multiples of 16. This may have been true of the first few operations,
but is not true of all operations.
In particular, multiply, shift by scalar, and compare of 8- and 16-bit
elements are not expanded inline if host vector operations are not
supported.
For an x86_64 host that does not support AVX, this means that we will
fall back to the helper, which will attempt to use SSE instructions,
which will SEGV on an invalid 8-byte aligned memory operation.
This patch simply removes the CONFIG_VECTOR16 code and configuration
without further simplification.
Buglink: https://bugs.launchpad.net/bugs/1863508
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
glibc and Linux-provided headers are known to generate macro
redefinition warnings when used together. For example:
<linux/mman.h> and <sys/mman.h> duplicate some macro definitions.
We normally never see those warnings because GCC suppresses
warnings generated by system headers. We carry our own copy of
Linux header files, though, and this makes those warnings not be
suppressed when glibc headers are included before Linux headers
(e.g. if <sys/mman.h> is included before <linux/mman.h>).
Use -isystem instead of -I for linux-headers. This makes the
compiler treat our linux-headers directory the same way it treats
system-provided Linux headers, and suppress warnings generated by
them.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The Simple Authentication and Security Layer (SASL) library
re-defines the struct iovec on Win32 [*]. QEMU also re-defines
it in "qemu/osdep.h". The two definitions then clash on a MinGW
build.
We can avoid the SASL definition by defining STRUCT_IOVEC_DEFINED.
Since QEMU already defines 'struct iovec' if it is missing, add
the definition to vnc_sasl_cflags to avoid SASL re-defining it.
[*] https://github.com/cyrusimap/cyrus-sasl/blob/cyrus-sasl-2.1.27/include/sasl.h#L187
Cc: Alexey Pavlov <alexpux@gmail.com>
Cc: Biswapriyo Nath <nathbappai@gmail.com>
Reported-by: Youry Metlitsky <winaes@yandex.ru>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200309122454.22551-2-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
On upgrades the old .so files usually are replaced. But on the other
hand since a qemu process represents a guest instance it is usually kept
around.
That makes late addition of dynamic features e.g. 'hot-attach of a ceph
disk' fail by trying to load a new version of e.f. block-rbd.so into an
old still running qemu binary.
This adds a fallback to also load modules from a versioned directory in the
temporary /var/run path. That way qemu is providing a way for packaging
to store modules of an upgraded qemu package as needed until the next reboot.
An example how that can then be used in packaging can be seen in:
https://git.launchpad.net/~paelzer/ubuntu/+source/qemu/log/?h=bug-1847361-miss-old-so-on-upgrade-UBUNTU
Fixes: https://bugs.launchpad.net/ubuntu/+source/qemu/+bug/1847361
Signed-off-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20200310145806.18335-2-christian.ehrhardt@canonical.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There were one error on the test (missing an s for --exists).
But we really need a recent zstd (1.4.0).
Thanks to Michal Privoznik to provide the right vension.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reported-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200310111431.173151-1-quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
The recent Linux io_uring API has several advantages over ppoll(2) and
epoll(2). Details are given in the source code.
Add an io_uring implementation and make it the default on Linux.
Performance is the same as with epoll(7) but later patches add
optimizations that take advantage of io_uring.
It is necessary to change how aio_set_fd_handler() deals with deleting
AioHandlers since removing monitored file descriptors is asynchronous in
io_uring. fdmon_io_uring_remove() marks the AioHandler deleted and
aio_set_fd_handler() will let it handle deletion in that case.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Link: https://lore.kernel.org/r/20200305170806.1313245-6-stefanha@redhat.com
Message-Id: <20200305170806.1313245-6-stefanha@redhat.com>
This adds a new binary qemu-storage-daemon that doesn't yet do more than
some typical initialisation for tools and parsing the basic command
options --version, --help and --trace.
Even though this doesn't add any options yet that create things (like
--object or --blockdev), already document that we're planning to process
them in the order they are given on the command line rather than trying
(and failing, like vl.c) to resolve dependencies between options
automatically.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200224143008.13362-2-kwolf@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This is used for some of the vm-build tests so lets detect it and
behave sanely when it is not installed.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200303150622.20133-8-alex.bennee@linaro.org>
Add it to several build systems to make testing good.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Message-id: 20200220041118.23264-19-alxndr@bu.edu
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
User-mode does not need the system tools. Do not build them by
default if the user specifies --disable-system.
This disables building the following binaries on a user-only build:
- elf2dmp
- qemu-edid
- qemu-ga
- qemu-img
- qemu-io
- qemu-nbd
- ivshmem-client
- ivshmem-server
The qemu-user binaries are not affected by this change.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20200217133327.25144-1-f4bug@amsat.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
if softmmu is not enabled, we disable by default fdt and
slirp as they are only used by -softmmu targets.
A side effect is the git submodules are not cloned
if they are not needed.
Clone and build can be forced with --enable-fdt and
--enable-slirp.
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190621130544.18860-1-lvivier@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
-----BEGIN PGP SIGNATURE-----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=UwrK
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/armbru/tags/pull-qapi-2020-02-15' into staging
QAPI patches for 2020-02-15
# gpg: Signature made Sat 15 Feb 2020 10:44:28 GMT
# gpg: using RSA key 354BC8B3D7EB2A6B68674E5F3870B400EB918653
# gpg: issuer "armbru@redhat.com"
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" [full]
# gpg: aka "Markus Armbruster <armbru@pond.sub.org>" [full]
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653
* remotes/armbru/tags/pull-qapi-2020-02-15:
qapi: Delete all the "foo: dropped in n.n" notes
qapi/migration.json: Replace _this_ with *this*
qapi: Add blank lines before bulleted lists
qapi: Use explicit bulleted lists
qapi/ui.json: Avoid `...' Texinfo style quoting
qapi/ui.json: Put input-send-event body text in the right place
qapi: Remove hardcoded tabs
qapi: Fix indent level on doc comments in json files
qapi: Fix incorrect "Not documented" claims in QMP documentation
qapi/block-core.json: Use literal block for ascii art
qga/qapi-schema.json: minor format fixups for rST
qga/qapi-schema.json: Fix indent level on doc comments
qga/qapi-schema.json: Fix missing '-' in GuestDiskBusType doc comment
Makefile: Fix typo in dependency list for interop manpages
configure: Check that sphinx-build is using Python 3
configure: Pick sphinx-build-3 when available
configure: Allow user to specify sphinx-build binary
qapi: Expand documentation for LostTickPolicy
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Currently configure's has_sphinx_build() check simply runs a dummy
sphinx-build and either passes or fails. This means that "no
sphinx-build at all" and "sphinx-build exists but is too old" are
both reported the same way.
Further, we want to assume that all the Python we write is running
with at least Python 3.5; configure checks that for our scripts, but
Sphinx extensions run with whatever Python version sphinx-build
itself is using.
Add a check to our conf.py which makes sphinx-build fail if it would
be running our extensions with an old Python, and handle this
in configure so we can report failure helpfully to the user.
This will mean that configure --enable-docs will fail like this
if the sphinx-build provided is not suitable:
Warning: sphinx-build exists but it is either too old or uses too old a Python version
ERROR: User requested feature docs
configure was not able to find it.
Install texinfo, Perl/perl-podlators and a Python 3 version of python-sphinx
(As usual, the default is to simply not build the docs, as we would
if sphinx-build wasn't present at all.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Message-Id: <20200213175647.17628-3-peter.maydell@linaro.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
The next commit will require a sphinx-build that uses Python 3. On
some systems, sphinx-build is fine, on others you need to use
sphinx-build-3. To keep things working out of the box on both kinds
of systems, try sphinx-build-3, then sphinx-build.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <87a75lqe8e.fsf@dusky.pond.sub.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
This is a fairly light-weight pull request, but I wanted to send it out to
avoid the Goldfish stuff getting buried as the next PR should contain the H
extension implementation.
As far as this PR goes, it contains:
* The addition of syscon device tree nodes for reboot and poweroff, which
allows Linux to control QEMU without an additional driver. The existing
device was already compatible with the syscon interface.
* A fix to our GDB stub to avoid confusing XLEN and FLEN, specifically useful
for rv32id-based systems.
* A device emulation for the Goldfish RTC device, a simple memory-mapped RTC.
* The addition of the Goldfish RTC device to the RISC-V virt board.
This passes "make check" and boots buildroot for me.
-----BEGIN PGP SIGNATURE-----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=D4dQ
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/palmer/tags/riscv-for-master-5.0-sf2' into staging
RISC-V Patches for the 5.0 Soft Freeze, Part 2
This is a fairly light-weight pull request, but I wanted to send it out to
avoid the Goldfish stuff getting buried as the next PR should contain the H
extension implementation.
As far as this PR goes, it contains:
* The addition of syscon device tree nodes for reboot and poweroff, which
allows Linux to control QEMU without an additional driver. The existing
device was already compatible with the syscon interface.
* A fix to our GDB stub to avoid confusing XLEN and FLEN, specifically useful
for rv32id-based systems.
* A device emulation for the Goldfish RTC device, a simple memory-mapped RTC.
* The addition of the Goldfish RTC device to the RISC-V virt board.
This passes "make check" and boots buildroot for me.
# gpg: Signature made Mon 10 Feb 2020 21:28:04 GMT
# gpg: using RSA key 2B3C3747446843B24A943A7A2E1319F35FBB1889
# gpg: issuer "palmer@dabbelt.com"
# gpg: Good signature from "Palmer Dabbelt <palmer@dabbelt.com>" [unknown]
# gpg: aka "Palmer Dabbelt <palmer@sifive.com>" [unknown]
# gpg: aka "Palmer Dabbelt <palmerdabbelt@google.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 00CE 76D1 8349 60DF CE88 6DF8 EF4C A150 2CCB AB41
# Subkey fingerprint: 2B3C 3747 4468 43B2 4A94 3A7A 2E13 19F3 5FBB 1889
* remotes/palmer/tags/riscv-for-master-5.0-sf2:
MAINTAINERS: Add maintainer entry for Goldfish RTC
riscv: virt: Use Goldfish RTC device
hw: rtc: Add Goldfish RTC device
riscv: Separate FPU register size from core register size in gdbstub [v2]
riscv/virt: Add syscon reboot and poweroff DT nodes
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Currently we insist on using 'sphinx-build' from the $PATH;
allow the user to specify the binary to use. This will be
more useful as we become pickier about the capabilities
we require (eg needing a Python 3 sphinx-build).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Message-Id: <20200213175647.17628-2-peter.maydell@linaro.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
TARGET_GPROF is the same for all targets, write it to
config-host.mak instead.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: <20200204161104.21077-1-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The size of the FPU registers is dictated by the 'f' and 'd' features,
not the core processor register size. Processors with the 'd' feature
have 64-bit FPU registers. Processors without the 'd' feature but with
the 'f' feature have 32-bit FPU registers.
Signed-off-by: Keith Packard <keithp@keithp.com>
[Palmer: This requires manually triggering a rebuild of
riscv32-softmmu/gdbstub-xml.c]
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
The variable is called 'have_afalg' and not 'hava_afalg'.
Fixes: f0d92b56d8 ('introduce some common functions for af_alg backend')
Message-Id: <20200203160046.23194-1-thuth@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Longpeng(Mike) <longpeng2@huawei.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
* Cleanups (Philippe)
* virtio-scsi fix (Pan Nengyuan)
* Tweak Skylake-v3 model id (Kashyap)
* x86 UCODE_REV support and nested live migration fix (myself)
* Advisory mode for pvpanic (Zhenwei)
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAABAgAGBQJeK1CXAAoJEL/70l94x66DXtkIAI6W5wEY0Yme4M9Q5mGc0RV8
uscPLg0wsg88u6xne8ucCiGymvDREym2ii/aVI0Hi5ish84ZMdCrdck9cd+llpMf
+a3slL26AKlOW8WtYSuyAE1RdLFXngeXdwal5KtWPEExJorkDUPTbwhBzQduQK1a
myoHHcbwdd/96v7FvKnfG8jM6KZtHPQQ0i6+6fX4PN44jaULQNjze8GIrRBEwqw5
uCKJFQPBXiVcxKjH5/kzI1vl2hLJbF2ZGVEzX/U8OPZwyGPHIkWquURo8lvUTPfb
ySlNTUTV2CyrN65TBRXQp/mJi44WvME5Jxlf5rNLBaYXPpL0zhmILKn5X5ya4U0=
=TD0Y
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging
* Register qdev properties as class properties (Marc-André)
* Cleanups (Philippe)
* virtio-scsi fix (Pan Nengyuan)
* Tweak Skylake-v3 model id (Kashyap)
* x86 UCODE_REV support and nested live migration fix (myself)
* Advisory mode for pvpanic (Zhenwei)
# gpg: Signature made Fri 24 Jan 2020 20:16:23 GMT
# gpg: using RSA key BFFBD25F78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* remotes/bonzini/tags/for-upstream: (58 commits)
build-sys: clean up flags included in the linker command line
target/i386: Add the 'model-id' for Skylake -v3 CPU models
qdev: use object_property_help()
qapi/qmp: add ObjectPropertyInfo.default-value
qom: introduce object_property_help()
qom: simplify qmp_device_list_properties()
vl: print default value in object help
qdev: register properties as class properties
qdev: move instance properties to class properties
qdev: rename DeviceClass.props
qdev: set properties with device_class_set_props()
object: return self in object_ref()
object: release all props
object: add object_class_property_add_link()
object: express const link with link property
object: add direct link flag
object: rename link "child" to "target"
object: check strong flag with &
object: do not free class properties
object: add object_property_set_default
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Some of the CFLAGS that are discovered during configure, for example
compiler warnings, are being included on the linker command line because
QEMU_CFLAGS is added to it. Other flags, such as the -m32, appear twice
because they are included in both QEMU_CFLAGS and LDFLAGS. All this
leads to confusion with respect to what goes in which Makefile variables
(and we have plenty).
So, introduce QEMU_LDFLAGS for flags discovered by configure, following
the lead of QEMU_CFLAGS, and stop adding to it:
1) options that are already in CFLAGS, for example "-g"
2) duplicate options
At the same time, options that _are_ needed by both compiler and linker
must now be added to both QEMU_CFLAGS and QEMU_LDFLAGS, which is clearer.
This is mostly -fsanitize options. For now, --extra-cflags has this behavior
(but --extra-cxxflags does not).
Meson will not include CFLAGS on the linker command line, do the same in our
build system as well.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We only require libfdt for system emulation, in a small set
of architecture:
4077 # fdt support is mandatory for at least some target architectures,
4078 # so insist on it if we're building those system emulators.
4079 fdt_required=no
4080 for target in $target_list; do
4081 case $target in
4082 aarch64*-softmmu|arm*-softmmu|ppc*-softmmu|microblaze*-softmmu|mips64el-softmmu|riscv*-softmmu)
4083 fdt_required=yes
Do not build libfdt if we did not manually specified --enable-fdt,
or have one of the platforms that require it in our target list.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200118140619.26333-2-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Define HAVE_STRUCT_STAT_ST_ATIM to 1 if `st_atim' is member of `struct
stat' which means support nanosecond resolution for the file timestamp
fields.
Signed-off-by: Jiufei Xue <jiufei.xue@linux.alibaba.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
kcov is kernel code coverage tracing tool. It requires kernel 4.4+
compiled with certain kernel options.
This patch checks if kcov header "sys/kcov.h" is present on build
machine, and stores the result in variable CONFIG_KCOV, meant to
be used in linux-user code related to the support for three ioctls
that were introduced at the same time as the mentioned header
(their definition was a part of the first version of that header).
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <1579214991-19602-11-git-send-email-aleksandar.markovic@rt-rk.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
All tcg includes are relative to the repository root directory,
we can safely remove the tcg/ directory from the include search
path list.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200101112303.20724-5-philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The qos stuff belongs to qtest, so move it into that directory, too.
Message-Id: <20191218103059.11729-8-thuth@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The tests directory itself is pretty overcrowded, and it's hard to
see which test belongs to which test subsystem (unit, qtest, ...).
Let's move the qtests to a separate folder for more clarity.
Message-Id: <20191218103059.11729-6-thuth@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
gdbus-codegen generated code requires gio-unix on Unix, so add it to
GIO libs/cflags.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Python 3.5 is the oldest Python version available on our
supported build platforms, and Python 2 end of life will be 3
weeks after the planned release date of QEMU 4.2.0. Drop Python
2 support from configure completely, and require Python 3.5 or
newer.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20191016224237.26180-1-ehabkost@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
- test tci with Travis
- enable multiarch testing in Travis
- default to out-of-tree builds
- make changing logfile safe via RCU
- remove redundant tests
- remove gtester test from docker
- convert DEBUG_MMAP to tracepoints
- remove hand rolled glob function
- trigger tcg re-configure when needed
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAl37M6gACgkQ+9DbCVqe
KkQ0Rwf/d0lGDPQN1Uf0zqZRQQmDCqWVuqHhZJ5xWDjbyVT2eUwR07TvNZeUKEWX
iO+u6S7Tv91oLjZN5WjhaiuSjtJaEzCdcpkIJAWXLP/lzse37HEwvLBsdg71y+46
LNvBrJRPpQotdb7fjr8RgCwc1qg2Bz15ekSn7XIA175zTMmUsshLJBVhLbGNqrVm
F2UmjB9oFJ0+nzrcEnpFmWw7xvVrX1dImZXv5C2pvuHF7efSjGwiFviTRZgDjOGs
V7HiWRV1QcgTigncncxTMbhMTKTVKK+e7O+y0DZWt/NSrT/yLDy5rcwySpmvu6C+
cRmh/0tMo1KAhiz8Xy8LookhVj6hdA==
=OAkV
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stsquad/tags/pull-tesing-and-misc-191219-1' into staging
Various testing and logging updates
- test tci with Travis
- enable multiarch testing in Travis
- default to out-of-tree builds
- make changing logfile safe via RCU
- remove redundant tests
- remove gtester test from docker
- convert DEBUG_MMAP to tracepoints
- remove hand rolled glob function
- trigger tcg re-configure when needed
# gpg: Signature made Thu 19 Dec 2019 08:24:08 GMT
# gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [full]
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44
* remotes/stsquad/tags/pull-tesing-and-misc-191219-1: (25 commits)
tests/tcg: ensure we re-configure if configure.sh is updated
trace: replace hand-crafted pattern_glob with g_pattern_match_simple
linux-user: convert target_munmap debug to a tracepoint
linux-user: log page table changes under -d page
linux-user: add target_mmap_complete tracepoint
linux-user: convert target_mmap debug to tracepoint
linux-user: convert target_mprotect debug to tracepoint
travis.yml: Remove the redundant clang-with-MAIN_SOFTMMU_TARGETS entry
docker: gtester is no longer used
Added tests for close and change of logfile.
Add use of RCU for qemu_logfile.
qemu_log_lock/unlock now preserves the qemu_logfile handle.
Add a mutex to guarantee single writer to qemu_logfile handle.
Cleaned up flow of code in qemu_set_log(), to simplify and clarify.
Fix double free issue in qemu_set_log_filename().
ci: build out-of-tree
travis.yml: Enable builds on arm64, ppc64le and s390x
tests/test-util-filemonitor: Skip test on non-x86 Travis containers
tests/hd-geo-test: Skip test when images can not be created
iotests: Skip test 079 if it is not possible to create large files
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Most developers are using out-of-tree builds and it was discussed in the past
to only allow those. To prepare for the transition, use out-of-tree builds
in all continuous integration jobs.
Based on a patch by Marc-André Lureau.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Li-Wen Hsu <lwhsu@freebsd.org>
Message-Id: <1576074829-56711-1-git-send-email-pbonzini@redhat.com>
Our docker infrastructure isn't quite as multiarch as we would wish so
lets allow the user to disable it if they want. This will allow us to
use still run check-tcg on non-x86 CI setups.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Tested-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Richard Henderson <richard.henderson@linaro.org>
Since we are actually testing for the newer capng library, rename the
symbol to match.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We are already including -D__STDC_LIMIT_MACROS in the global CXXFLAGS,
so it makes sense to do the same for -D__STDC_CONSTANT_MACROS and
-D__STDC_FORMAT_MACROS instead of limiting that to libvixl.
The -Wno-sign-compare option can also be removed since GCC 4.6 is not
supported anymore.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When including the internal SLIRP library, we should add all the libraries that
it needs for the build. Right now they are all included by QEMU, but -liphlpapi
is not needed without slirp. Move it from LIBS to slirp_libs.
Based on a patch by Marc-André Lureau.
Acked-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It's been deprecated since QEMU v3.1. We've explicitly asked in the
deprecation message that people should speak up on qemu-devel in case
they are still actively using the bluetooth part of QEMU, but nobody
ever replied that they are really still using it.
I've tried it on my own to use this bluetooth subsystem for one of my
guests, but I was also not able to get it running anymore: When I was
trying to pass-through a real bluetooth device, either the guest did
not see the device at all, or the guest crashed.
Even worse for the emulated device: When running
qemu-system-x86_64 -bt device:keyboard
QEMU crashes once you hit a key.
So it seems like the bluetooth stack is not only neglected, it is
completely bitrotten, as far as I can tell. The only attention that
this code got during the past years were some CVEs that have been
spotted there. So this code is a burden for the developers, without
any real benefit anymore. Time to remove it.
Note: hw/bt/Kconfig only gets cleared but not removed here yet.
Otherwise there is a problem with the *-softmmu/config-devices.mak.d
dependency files - they still contain a reference to this file which
gets evaluated first on some build hosts, before the file gets
properly recreated. To avoid breaking these builders, we still need
the file around for some time. It will get removed in a couple of
weeks instead.
Message-Id: <20191120091014.16883-4-thuth@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
virtfs-proxy-helper is the only user of libcap; everyone else is using
the simpler libcap-ng API. Switch and remove the configure code to
detect libcap.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
[groug: - drop remaining -lcap from Makefile
- fix error message in configure]
Signed-off-by: Greg Kurz <groug@kaod.org>
The bzip2 tool is not included in default installations.
On freshly installed systems, ./configure succeeds but 'make'
might fail later:
BUNZIP2 pc-bios/edk2-i386-secure-code.fd.bz2
/bin/sh: bzip2: command not found
make: *** [Makefile:305: pc-bios/edk2-i386-secure-code.fd] Error 127
make: *** Deleting file 'pc-bios/edk2-i386-secure-code.fd'
make: *** Waiting for unfinished jobs....
Add a check in ./configure to warn the user if bzip2 is missing.
See also: 536d2173b2 ("roms: build edk2 firmware binaries ...")
Reported-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20191108114531.21518-3-philmd@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Luc Michel <luc.michel@greensocs.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The EDK2 firmware blobs only target the X86/ARM architectures.
Define the DECOMPRESS_EDK2_BLOBS variable and only decompress
the blobs when the variable exists.
See also: 536d2173b2 ("roms: build edk2 firmware binaries ...")
Suggested-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20191108114531.21518-2-philmd@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Reviewed-by: Luc Michel <luc.michel@greensocs.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The function reg_mr_iova is an enhanced version of ibv_reg_mr function
that can help to easly register and use guest's MRs.
Add check in 'configure' phase to detect if we have libibverbs with this
support.
Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com>
Reviewed-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Message-Id: <20190818132107.18181-2-yuval.shaia@oracle.com>
Signed-off-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
- use --enable-plugins @ configure
- low impact introspection (-plugin empty.so to measure overhead)
- plugins cannot alter guest state
- example plugins included in source tree (tests/plugins)
- -d plugin to enable plugin output in logs
- check-tcg runs extra tests when plugins enabled
- documentation in docs/devel/plugins.rst
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAl23BZMACgkQ+9DbCVqe
KkRPegf/QHygZ4ER2jOaWEookxiOEcik+dzQKVGNqLNXeMLvo5fGjGVpFoFxSgfv
ZvCAL4xbW44zsYlVfh59tfn4Tu9qK7s7/qM3WXpHsmuvEuhoWef0Lt2jSe+D46Rs
KeG/aX+rHLUR8rr9eCgE+1/MQmxPUj3VUonkUpNkk2ebBbSNoLSOudB4DD9Vcyl7
Pya1kPvA6W9bwI20ZSWihE7flg13o62Pp+LgAFLrsfxXOxOMkPrU8Pp+B0Dvr+hL
5Oh0clZLhiRi75x+KVGZ90TVsoftdjYoOWGMOudS/+NNmqKT1NTLm0K1WJYyRMQ1
V0ne4/OcGNq7x8gcOx/xs09ADu5/VA==
=UXR/
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stsquad/tags/pull-tcg-plugins-281019-4' into staging
TCG Plugins initial implementation
- use --enable-plugins @ configure
- low impact introspection (-plugin empty.so to measure overhead)
- plugins cannot alter guest state
- example plugins included in source tree (tests/plugins)
- -d plugin to enable plugin output in logs
- check-tcg runs extra tests when plugins enabled
- documentation in docs/devel/plugins.rst
# gpg: Signature made Mon 28 Oct 2019 15:13:23 GMT
# gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [full]
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44
* remotes/stsquad/tags/pull-tcg-plugins-281019-4: (57 commits)
travis.yml: enable linux-gcc-debug-tcg cache
MAINTAINERS: add me for the TCG plugins code
scripts/checkpatch.pl: don't complain about (foo, /* empty */)
.travis.yml: add --enable-plugins tests
include/exec: wrap cpu_ldst.h in CONFIG_TCG
accel/stubs: reduce headers from tcg-stub
tests/plugin: add hotpages to analyse memory access patterns
tests/plugin: add instruction execution breakdown
tests/plugin: add a hotblocks plugin
tests/tcg: enable plugin testing
tests/tcg: drop test-i386-fprem from TESTS when not SLOW
tests/tcg: move "virtual" tests to EXTRA_TESTS
tests/tcg: set QEMU_OPTS for all cris runs
tests/tcg/Makefile.target: fix path to config-host.mak
tests/plugin: add sample plugins
linux-user: support -plugin option
vl: support -plugin option
plugin: add qemu_plugin_outs helper
plugin: add qemu_plugin_insn_disas helper
plugin: expand the plugin_init function to include an info block
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Currently QEMU uses its own XTS cipher mode, however, this has
relatively poor performance.
Gcrypt now includes its own XTS cipher which is at least x2 faster than
what we get with QEMU's on Fedora/RHEL hosts. With gcrypt git master, a
further x5-6 speed up is seen.
This is essential for QEMU's LUKS performance to be viable.
-----BEGIN PGP SIGNATURE-----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=fkwe
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/berrange/tags/crypto-luks-pull-request' into staging
crypto: improve performance of ciphers in XTS mode
Currently QEMU uses its own XTS cipher mode, however, this has
relatively poor performance.
Gcrypt now includes its own XTS cipher which is at least x2 faster than
what we get with QEMU's on Fedora/RHEL hosts. With gcrypt git master, a
further x5-6 speed up is seen.
This is essential for QEMU's LUKS performance to be viable.
# gpg: Signature made Mon 28 Oct 2019 15:48:38 GMT
# gpg: using RSA key DAF3A6FDB26B62912D0E8E3FBE86EBB415104FDF
# gpg: Good signature from "Daniel P. Berrange <dan@berrange.com>" [full]
# gpg: aka "Daniel P. Berrange <berrange@redhat.com>" [full]
# Primary key fingerprint: DAF3 A6FD B26B 6291 2D0E 8E3F BE86 EBB4 1510 4FDF
* remotes/berrange/tags/crypto-luks-pull-request:
crypto: add support for nettle's native XTS impl
crypto: add support for gcrypt's native XTS impl
tests: benchmark crypto with fixed data size, not time period
tests: allow filtering crypto cipher benchmark tests
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Nettle 3.5.0 will add support for the XTS mode. Use this because long
term we wish to delete QEMU's XTS impl to avoid carrying private crypto
algorithm impls.
Unfortunately this degrades nettle performance from 612 MB/s to 568 MB/s
as nettle's XTS impl isn't so well optimized yet.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Libgcrypt 1.8.0 added support for the XTS mode. Use this because long
term we wish to delete QEMU's XTS impl to avoid carrying private crypto
algorithm impls.
As an added benefit, using this improves performance from 531 MB/sec to
670 MB/sec, since we are avoiding several layers of function call
indirection.
This is even more noticable with the gcrypt builds in Fedora or RHEL-8
which have a non-upstream patch for FIPS mode which does mutex locking.
This is catastrophic for encryption performance with small block sizes,
meaning this patch improves encryption from 240 MB/sec to 670 MB/sec.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Pass arguments with -plugin=libfoo.so,arg=bar,arg=baz
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Emilio G. Cota <cota@braap.org>
[AJB: moved into plugins]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
This adds the basic boilerplate feature enable option for the build.
We shall expand it later.
[AJB: split from larger patch]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Emilio G. Cota <cota@braap.org>
[AJB: moved directory and merged various fixes]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
This patch enables a debugger to read the current privilege level via a virtual
"priv" register. When compiled with CONFIG_USER_ONLY the register is still
visible but always reports the value zero.
Signed-off-by: Jonathan Behrens <jonathan@fintelia.io>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Such support is present almost everywhere, except for Xcode 9.
It is added in Xcode 10, but travis uses xcode9 by default,
so we should support it for a while yet.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
ARM ACPI memory hotplug support +
tests for new arm/virt ACPI tables.
Virtio fs support (no migration).
A vhost-user reconnect bugfix.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJdpjPbAAoJECgfDbjSjVRpQqUH/2xyT++y8K17mCI1IILLZd3d
eOqElEHz78qlEfR2euv63YksZoeHpMO5HiAdwOGGF8CjcaCT4Hl+pPDffTYVXtt+
VZ88vSSXL49wpMcpvRGR5Isy0eXJzWilTBMu2eu8phN9tX82dlu08Oi4XGAosrBJ
uZg61DyiGDnSOpoofHhjvXJEaiL0pzkTjf8qAoW3TaVcB9NQKnunMEIDD646JS5z
AAj4+XBJfUG9cp7/MG+djjVmJDdUpjL5e5uWNWakbgUVqSbHog78RIrBoD6SH7pt
/6hHHoSM9VX1wWgdTdVdNAQAZVnWs31w4v31d8UfaT15KJEoG47U0gDgmLzXDyo=
=+xdg
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
virtio, vhost, acpi: features, fixes, tests
ARM ACPI memory hotplug support +
tests for new arm/virt ACPI tables.
Virtio fs support (no migration).
A vhost-user reconnect bugfix.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Tue 15 Oct 2019 22:02:19 BST
# gpg: using RSA key 281F0DB8D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full]
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* remotes/mst/tags/for_upstream:
virtio: add vhost-user-fs-pci device
virtio: add vhost-user-fs base device
virtio: Add virtio_fs linux headers
tests/acpi: add expected tables for arm/virt
tests: document how to update acpi tables
tests: Add bios tests to arm/virt
tests: allow empty expected files
tests/acpi: add empty files
tests: Update ACPI tables list for upcoming arm/virt tests
docs/specs: Add ACPI GED documentation
hw/arm: Use GED for system_powerdown event
hw/arm: Factor out powerdown notifier from GPIO
hw/arm/virt-acpi-build: Add PC-DIMM in SRAT
hw/arm/virt: Enable device memory cold/hot plug with ACPI boot
hw/arm/virt: Add memory hotplug framework
hw/acpi: Add ACPI Generic Event Device Support
hw/acpi: Do not create memory hotplug method when handler is not defined
hw/acpi: Make ACPI IO address space configurable
vhost-user: save features if the char dev is closed
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The virtio-fs virtio device provides shared file system access using
the FUSE protocol carried over virtio.
The actual file server is implemented in an external vhost-user-fs device
backend process.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20190930105135.27244-3-dgilbert@redhat.com>
Acked-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
SLOF implements one itself so let's remove it from QEMU. It is one less
image and simpler setup as the RTAS blob never stays in its initial place
anyway as the guest OS always decides where to put it.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
On IBM Z, KVM in the kernel is only implemented for 64-bit mode, and
with regards to TCG, we also only support 64-bit host CPUs (see the
check at the beginning of tcg/s390/tcg-target.inc.c), so we should
remove s390 (without "x", i.e. the old 31-bit mode CPUs) from the
list of supported CPUs.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20190928190334.6897-1-thuth@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
The slirp sub-module complains about not being able to find the glib
library on cross-compiles because it is using the default pkg-config
tool (which isn't installed in our cross-build docker images).
Preserve PKG_CONFIG in our host config and pass it down to slirp.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
