Video streaming detection heuristics in spice-server have problems
keeping modern desktop animations (as done by gnome shell) and real
video playback apart. This leads to jpeg compression artefacts on
your desktop, due to spice using mjpeg to send what it thinks is
a video stream.
Turn off video detection by default to avoid these artifacts.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Alon Levy <alevy@redhat.com>
This patch fixes spice display initialization to handle
multihead properly.
spice-core now keeps track of which QemuConsole has a spice
display channel attached to it and which has not. It also
manages display channel ids.
spice-display looks at all QemuConsoles and will pick up any
graphic console not yet bound to a spice channel (which in practice
are all non-qxl graphic devices).
Result is that
(a) you'll get a spice client window for each graphical device
now (first only without this patch), and
(b) mixing qxl and non-qxl vga cards works properly.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
ui/vnc.c:vnc_display_open() and spice-server/server/reds.c:do_spice_init()
are both calling sasl_server_init(). If spice_server_set_sasl_appname()
hasn't been called, spice-server will call it with "spice" as an appname,
causing cyrus-sasl to try to use a /etc/sasl2/spice.conf config file rather
than the /etc/sasl2/qemu.conf file that QEMU uses.
When using -spice sasl on the command line, QEMU properly calls
spice_server_set_sasl_appname() to set the SASL appname as "qemu",
but when using a QXL device without using SPICE, spice_server_init()
is called from qemu_spice_add_interface() without setting the appname
to "qemu", which then causes the VNC code to try to use spice.conf
instead of qemu.conf.
Signed-off-by: Christophe Fergeau <cfergeau@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Several places in spice-core.c were using either g_malloc+snprintf
or snprintf+g_strdup to achieve the same result as g_strdup_printf.
Signed-off-by: Christophe Fergeau <cfergeau@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This is an autogenerated patch using scripts/switch-timer-api.
Switch the entire code base to using the new timer API.
Note this patch may introduce some line length issues.
Signed-off-by: Alex Bligh <alex@alex.org.uk>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Spice has two display interface implementations: One integrated into
the qxl graphics card, and one generic which can operate with every
qemu-emulated graphics card.
The generic one is activated in case spice is used without qxl. The
logic for that only caught the "-vga qxl" case, "-device qxl-vga" goes
unnoticed. Fix that by adding a check in the spice interface
registration so we'll notice the qxl card no matter how it is created.
https://bugzilla.redhat.com/show_bug.cgi?id=981094
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Commit 29ae8a4133 ("rdma: introduce
MIG_STATE_NONE and change MIG_STATE_SETUP state transition") changed the
state transitions during migration setup.
Spice used to be notified with MIG_STATE_ACTIVE and it detected this
using migration_is_active(). Spice is now notified with
MIG_STATE_SETUP and migration_is_active() no longer works.
Replace migration_is_active() with migration_in_setup() to fix spice
migration.
Cc: Michael R. Hines <mrhines@us.ibm.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The spice_server pointer is a global variable and
vm_change_state_handler() therefore does not use its opaque parameter.
The vm change state handler is added with a pointer to the spice_server
pointer. This is useless and we probably would not want 2 levels of
pointers.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Uri Lublin <uril@redhat.com>
* bonzini/header-dirs: (45 commits)
janitor: move remaining public headers to include/
hw: move executable format header files to hw/
fpu: move public header file to include/fpu
softmmu: move remaining include files to include/ subdirectories
softmmu: move include files to include/sysemu/
misc: move include files to include/qemu/
qom: move include files to include/qom/
migration: move include files to include/migration/
monitor: move include files to include/monitor/
exec: move include files to include/exec/
block: move include files to include/block/
qapi: move include files to include/qobject/
janitor: add guards to headers
qapi: make struct Visitor opaque
qapi: remove qapi/qapi-types-core.h
qapi: move inclusions of qemu-common.h from headers to .c files
ui: move files to ui/ and include/ui/
qemu-ga: move qemu-ga files to qga/
net: reorganize headers
net: move net.c to net/
...
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
When qxl + vnc are used, a dummy spice_server is initialized.
The spice_server has to be told when the VM runstate changes,
which is what this patch does.
Without it, from qxl_send_events(), the following error message is shown:
qxl_send_events: spice-server bug: guest stopped, ignoring
Cc: qemu-stable@nongnu.org
Signed-off-by: Uri Lublin <uril@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Commit c448e8552b (spice: tls
support) added options to the -spice command line. But there
is an inconsistency between the declaration of the option
'x509-dh-key-file' to -spice command line and its parameter
parsing 'x509-dh-file' in function qemu_spice_init.
https://bugs.launchpad.net/qemu/+bug/1035042
Reported-by: Alon Bar-Lev <alon.barlev@gmail.com>
Signed-off-by: Lei Li <lilei@linux.vnet.ibm.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
With the next qemu version (1.3) we are going to bump the qxl device
revision to 4. The new features available require a recent spice-server
version, so raise up the bar. Otherwise we would end up with different
qxl revisions depending on the spice-server version installed, which
would be a major PITA when it comes to compat properties.
Clear out a big bunch of #ifdefs which are not needed any more.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The seamless-migration flag is required in order to identify
whether libvirt supports the new QEVENT_SPICE_MIGRATE_COMPLETED or not
(by default the flag is off).
New libvirt versions that wait for QEVENT_SPICE_MIGRATE_COMPLETED should turn on this flag.
When this flag is off, spice fallbacks to its old migration method, which
can result in data loss.
Signed-off-by: Yonit Halperin <yhalperi@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The flag is 'true' when spice migration has completed on the src side.
It is needed for a case where libvirt dies before migration completes
and it misses the event QEVENT_SPICE_MIGRATE_COMPLETED.
When libvirt is restored and queries the migration status, it also needs
to query spice and check if its migration has completed.
Signed-off-by: Yonit Halperin <yhalperi@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
When migrating, libvirt queries the migration status, and upon migration
completions, it closes the migration src. On the other hand, when
migration is completed, spice transfers data from the src to destination
via the client. This data is required for keeping the spice session
after migration, without suffering from data loss and inconsistencies.
In order to allow this data transfer, we add QEVENT for signaling
libvirt that spice migration has completed, and libvirt needs to wait
for this event before quitting the src process.
Signed-off-by: Yonit Halperin <yhalperi@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Spice server needs to know about the vm state in order to prevent
attempts to write to devices when they are stopped, mainly during
the non-live stage of migration.
Instead, spice will take care of restoring this writes, on the migration
target side, after migration completes.
Signed-off-by: Yonit Halperin <yhalperi@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
When parsing its command line parameters, spice aborts when it
finds unexpected values, except for the 'streaming-video' option.
This happens because the parsing of the parameters for this option
is done using the 'name2enum' helper, which does not error out
on unknown values. Using the 'parse_name' helper makes sure we
error out in this case. Looking at git history, the use of
'name2enum' instead of 'parse_name' seems to have been an oversight,
so let's change to that now.
Fixes rhbz#831708
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Add mouse_mode, either server or mouse, to qmp and hmp commands, based
on spice_server_is_server_mouse added in spice-server 0.10.3.
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Commit 1b71f7c14f moved MODULE_INIT_QOM to
way before MODULE_INIT_MACHINE, thereby breaking assumptions made in
spice-core.c which registered both a type initializer and a machine
intializer.
This fix removes the type registration, and replaces it with calling
qemu_spice_init in vl.c after command line parsing (second pass) is
done, and after timers are armed, required by spice server.
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
It's currently possible to setup spice channels using TLS when
no TLS port has been specified (ie TLS is disabled). This cannot
work, so better to error out in such a situation.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Error message reporting during spice startup wasn't consistent, it was done
with fprintf(stderr, "") but sometimes the message didn't have a trailing
\n. Using error_report make the intent of the message clearer and deal
with the final \n for us.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
drop all ifdefs on SPICE_INTERFACE_QXL_MINOR >= 1 as a result,
any check for SPICE_SERVER_VERSION that is now always satisfied,
and SPICE_INTERFACE_CORE_MINOR >= 3 tests, because
0.8.2 has SPICE_INTERFACE_QXL_MINOR == 1 and
SPICE_INTERFACE_CORE_MINOR == 3.
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
With the acceptance of some new APIs to libspice-server.so it
is possible to add support for SPICE to the 'add_client'
monitor command, bringing parity with VNC. Since SPICE can
use TLS or plain connections, the command also gains a new
'tls' parameter to specify whether TLS should be attempted
on the injected client sockets.
This new feature is only enabled if building against a
libspice-server >= 0.10.1
* qmp-commands.hx: Add 'tls' parameter & missing doc for
'skipauth' parameter
* monitor.c: Wire up SPICE for 'add_client' command
* ui/qemu-spice.h, ui/spice-core.c: Add qemu_spice_display_add_client
API to wire up from monitor
[1] http://cgit.freedesktop.org/spice/spice/commit/server/spice.h?id=d55b68b6b44f2499278fa860fb47ff22f5011faahttp://cgit.freedesktop.org/spice/spice/commit/server/spice.h?id=bd07dde530d9504e1cfe7ed5837fc00c26f36716
Changes in v3:
- Added 'optional' flag to new parameters documented
- Added no-op impl of qemu_spice_display_add_client when
SPICE is disabled during build
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Replace device_init() with generalized type_init().
While at it, unify naming convention: type_init([$prefix_]register_types)
Also, type_init() is a function, so add preceding blank line where
necessary and don't put a semicolon after the closing brace.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Cc: Anthony Liguori <anthony@codemonkey.ws>
Cc: malc <av1474@comtv.ru>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Setting both read and write handlers to NULL in qemu_set_fd_handler
is not enougth to make qemu purge the file handle from the list.
We must set opaque to NULL too.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
No need to use pthread directly, we have proper abstractions for
identity checking.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
RHBZ 737921
Spice client is required to connect to the migration target before/as migration
starts. Since after migration starts, the target qemu is blocked and cannot accept new spice client
we trigger the connection to the target upon client_migrate_info command.
client_migrate_info completion cb will be called after spice client has been
connected to the target (or a timeout). See following patches and spice patches.
Signed-off-by: Yonit Halperin <yhalperi@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
