Without this, qemu segfaults when a BH handler first deletes its BH and
then calls another function which involves a nested qemu_bh_poll() call.
This can be reproduced by generating an I/O error (e.g. with blkdebug) on
an IDE device and using rerror/werror=stop to stop the VM. When continuing
the VM, qemu segfaults.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Clearing the error status flag was missing for restarting flushes. Now that the
error status is separate from the BM status register, we can simply set it to 0
after restarting the request. This ensures that we never forget to clear a bit.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add support for TRIM sub function of the data set management command,
and wire it up to the qemu discard infrastructure.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Replace the is_read flag with a dma_cmd flag to allow the dma and
restart logic to handler other commands like TRIM.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Make dma_bdrv_io available for drivers, and pass an explicit I/O function
instead of hardcoding bdrv_aio_readv/bdrv_aio_writev. This is required
to implement non-READ/WRITE dma commands in the ide driver, e.g. the
upcoming TRIM support.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
When a failed PIO request caused the VM to stop, we still need to transfer the
PIO state even though DRQ=0 at this point.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
When adding the werror=stop mode, some flags were added to s->status
which are used to determine what kind of operation should be restarted
when the VM is continued.
Unfortunately, it turns out that s->status is in fact a device register
and as such is visible to the guest (some of the abused bits are even
writable for the guest).
For migration we keep on using the old VMState field (renamed to
migration_compat_status) if the status register doesn't use any of the
previously abused bits. If it does, we use a subsection with a clean copy of
the status register.
The error status is always sent in a subsection if there is any error. It can't
use the old field because errors happen even without PCI.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
If qcow2_cache_put returns an error during cluster allocation and the
allocation fails, it must be removed from the list of in-flight allocations.
Otherwise we'd get a loop in the list when the ACB is used for the next
allocation.
Luckily, this qcow2_cache_put shouldn't fail anyway because the L2 table is
only read, so that qcow2_cache_put doesn't even involve I/O.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
bdrv_aio_* must not call the callback before returning to its caller. In vdi,
this could happen in some error cases. This starts the real requests processing
in a BH to avoid this situation.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
bdrv_aio_* must not call the callback before returning to its caller. In qcow,
this could happen in some error cases. This starts the real requests processing
in a BH to avoid this situation.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
bdrv_aio_* must not call the callback before returning to its caller. In qcow2,
this could happen in some error cases. This starts the real requests processing
in a BH to avoid this situation.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This patchset enables a new CPU feature SMEP (Supervisor Mode Execution
Protection) in QEMU-KVM. SMEP prevents kernel from executing code in application.
Updated Intel SDM describes this CPU feature. The document will be published soon.
SMEP is identified by CPUID leaf 7 EBX[7], which is 0 before. Get the right value by query KVM kernel module, so that guest can get SMEP through CPUID.
Signed-off-by: Yang, Wei <wei.y.yang@intel.com>
Singed-off-by: Shan, Haitao <haitao.shan@intel.com>
Singed-off-by: Li, Xin <xin.li@intel.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
When KVM is running on VIA CPU with host cpu's model, the
feautures of VIA CPU will be passed into kvm guest by calling
the CPUID instruction for Centaur.
Signed-off-by: BrillyWu<brillywu@viatech.com.cn>
Signed-off-by: KaryJin<karyjin@viatech.com.cn>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
ccid_initfn() allocates CCIDBus dynamically, but there is no exit
callback to free it.
Fix by getting rid of the allocation.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
No flag to configure is required. Instead, added a libcacard.la target that
is not built by default, only when requested explicitly via:
mkdir build
cd build
../configure
make libcacard.la
make install-libcacard
Uses libtool to do actual linking of object files and shared library, and
installing. Tested only under linux, but supposed to work on other systems as
well.
If libtool isn't found you get a message complaining about that, only at build
time (since it is not a default target I did not add a message at configure
time).
New build artifacts:
.libs subdirectories (at <buildroot> and <buildroot>/libcacard)
*.lo files (at same locations as the respective o files)
Added %.lo : %.c rule that uses libtool.
Updated clean rule to clean up those artifacts.
Added specific rule to call dtrace with libtool wrapper (note that because of
a current upstream dtrace bug fixed by systemtap b1568fd85 commit the -fPIC flag
isn't actually passed on. still current dtrace+libtool produced object links fine).
If libtool is missing any of the following targets will complain and exit 1:
any subdir: *.lo
root and libcacard: libcacard.la, libcacard-instsall
Tested to link and load with all tracing backends.
When qemu gets compiled without support of vhost-net, any attempt
to use it fails with a very clear error message:
qemu-system-x86_64: -netdev ...,vhost=on: vhost-net requested but could not be initialized
there's absolutely no reason given _why_ it coult not be
initialized, and even strace'ing the process in question
does not reveal any errors. So print a message telling
what's going on.
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
expire_time must be initialited when the guest activates the
usb scheduler, not at device creation time.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Implement the wakeup callback in the OHCI USBPortOps, so that when
a downstream device wakes up it correctly causes the OHCI controller
to come out of suspend.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
HcPeriodCurrentED is read-only, but Linux writes to it anyway; silently
ignore this rather than printing a warning message.
(Specifically, drivers/usb/host/ohci-hub.c:ohci_rh_resume() writes a
0, in at least kernels 2.6.25 through 2.6.39.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This causes an "Error: tried to detach unattached usb device " to be printed,
this can happen when deleting ie a usb host qdev, which did not
get attached (because a device matching the filter never got plugged in).
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
1024 bytes is way to small, one hd UVC webcam I have over here has so
many resolutions its descriptors take op close to 4k. Hopefully 8k will
be enough for all devices.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
If a user wants to redirect 2 identical usb sticks, in theory this is
possible by doing:
usb_add host🔢5678
usb_add host🔢5678
But this will lead to us trying to open the first stick twice, since we
don't break the loop after having found a match in our filter list, so the next'
filter list entry will result in us trying to open the same device again.
Fix this by adding the missing break.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The connectinfo ioctl only differentiates between lo speed devices, and
all other speeds, where as we would like to know the real speed. The real
speed is available in sysfs so use that when available.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This patch fixes a bunch of issues in the itd descriptor handling.
Most important fix is to handle transfers which cross page borders
correctly by looking up the address of the next page. Luckily the
linux uses physically contigous memory so the data used to hits the
correct location even with this bug instead of corrupting guest
memory. Also the transfer length updates for outgoing transfers wasn't
correct.
While being at it DPRINTFs have been replaced by tracepoints.
The isoch_pause logic has been disabled. Not clear to me which propose
this serves and I think it is incorrect too as we just skip processing
itds. Even when no xfer happens we have to clear the active bit.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The USB tablet advertises that it supports the "boot" protocol.
However, its reports aren't "boot" protocol compatible. So, it
shouldn't claim that.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The QEMU USB mouse claims to support the "boot" protocol
(bInterfaceSubClass is 1). However, the mouse rejects the
Set_Protocol command.
The qemu mouse does support the "boot" protocol specification, so a
simple fix is to enable the Set_Protocol request.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The state machine doesn't stop in EXECUTING state any more when async
packets are in flight, so the checks are not needed any more and can
be dropped.
Also kick out the check for the frame timer. As we don't stop & sleep
any more on async packets this is obsolete.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This patch adds USBBusOps struct with (for now) only a single callback
which is called when a device is about to be destroyed. The USB Host
adapters are implementing this callback and use it to cancel any async
requests which might be in flight before the device actually goes away.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Set the correct bits for nodev, stall and babble errors.
Raise errint irq. Fix state transition from WRITEBACK
to the next state.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Two bugs at once:
First the mask is backwards, so the it used to keeps the offset and
clears the page address, which is not what we need when we update the
offset.
Second the offset calculation is wrong in case head isn't page aligned.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This patch adds support for keeping multiple queues going at the same
time. One slow device will not affect other devices any more.
The patch adds code to manage EHCIQueue structs. It also does a number
of changes to the state machine:
* The state machine will never ever stop in EXECUTING any more.
Instead it will continue with the next queue (aka HORIZONTALQH) when
the usb device returns USB_RET_ASYNC.
* The state machine will stop processing when it figures it walks in
circles (easy to figure now that we have a EHCIQueue struct for each
QH we've processed). The bailout logic should not be needed any
more. For now it is still in, but will assert() in case it triggers.
* The state machine will just skip queues with a async USBPacket in
flight.
* The state machine will resume processing as soon as the async
USBPacket is finished.
The patch also takes care to flush the QH struct back to guest memory
when needed, so we don't get stale data when (re-)loading it from guest
memory in FETCHQH state.
It also makes the writeback code to not touch the first three dwords of
the QH struct as the EHCI must not write them. This actually fixes a
bug where QH chaining changes (next ptr) by the linux ehci driver where
overwritten by the emulated EHCI.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Add EHCIQueue struct, move the fields needed to track the queue state
into that struct. Pass the new struct instead of ehci state down to
functions which handle the queue state. Lot of variable references have
changed due to that without an actual functional change.
Replace fetch_addr with two variables, one for async and one for
periodic schedule. Add functions to get and set the fetch address.
Use EHCIQueue->usb_status (old name: EHCIState->exec_status) directly in
ehci_execute_complete instead of passing around the status using a
parameters and the return value.
ehci_state_fetchqh returns a EHCIQueue struct now.
No change in behavior.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
