Model fp_exception state, in which only fp stores are allowed
until such time as the FQ has been flushed.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Carl Hauser <chauser@pullman.com>
Invalid encoding of addr should raise TT_ILL_INSN, so
check before supervisor, which might raise TT_PRIV_INSN.
Clear QNE after execution.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2340
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Carl Hauser <chauser@pullman.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Carl Hauser <chauser@pullman.com>
Implement a single instruction floating point queue,
populated while delivering an fp exception.
Signed-off-by: Carl Hauser <chauser@pullman.com>
[rth: Split from a larger patch]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Carl Hauser <chauser@pullman.com>
Add support for, and migrate, a single-entry fp
instruction queue for sparc32.
Signed-off-by: Carl Hauser <chauser@pullman.com>
[rth: Split from a larger patch;
adjust representation with union;
add migration state]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Carl Hauser <chauser@pullman.com>
This patch implements the periodic and the swsmi ICH9 chipset timers. They are
especially useful when prototyping UEFI firmware (e.g. with EDK2's OVMF)
using QEMU.
For backwards compatibility, the compat properties "x-smi-swsmi-timer",
and "x-smi-periodic-timer" are introduced.
Additionally, writes to the SMI_STS register are enabled for the
corresponding two bits using a write mask to make future work easier.
Signed-off-by: Dominic Prinz <git@dprinz.de>
Message-Id: <1d90ea69e01ab71a0f2ced116801dc78e04f4448.1725991505.git.git@dprinz.de>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
If the config directory in sysfs does not exist at all, we are dealing
with a system that does not support THPs. Simply use 1 MiB block size
then, instead of warning "Could not detect THP size, falling back to
..." and falling back to the default THP size.
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Gavin Shan <gshan@redhat.com>
Cc: Juraj Marcin <jmarcin@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20240910163433.2100295-1-david@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Currently, the guest may write to the device configuration space,
whereas the virtio sound device specification in chapter 5.14.4
clearly states that the fields in the device configuration space
are driver-read-only.
Remove the set_config function from the virtio_snd class.
This also prevents a heap buffer overflow. See QEMU issue #2296.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2296
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-Id: <20240901130112.8242-1-vr_qemu@t-online.de>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
When using the mailbox command get scan media results, the scan media
restart physical address field in the ouput palyload is not 64-byte
aligned.
This patch removed the error source of the restart physical address.
The Scan Media Restart Physical Address is the location from which the
host should restart the Scan Media operation. [5:0] bits are reserved.
Refer to CXL spec r3.1 Table 8-146
Fixes: 89b5cfcc31 ("hw/cxl: Add get scan media results cmd support")
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/linux-cxl/20240819154206.16456-1-engguopeng@buaa.edu.cn/
Signed-off-by: peng guo <engguopeng@buaa.edu.cn>
Message-Id: <20240825102212.3871-1-engguopeng@buaa.edu.cn>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Now virtio_address_space_lookup only lookup common/isr/device/notify
MR and exclude their subregions.
When VHOST_USER_PROTOCOL_F_HOST_NOTIFIER enable, the notify MR has
host-notifier subregions and we need use host-notifier MR to
notify the hardware accelerator directly instead of eventfd notify.
Further more, maybe common/isr/device MR also has subregions in
the future, so need memory_region_find for each MR incluing
their subregions.
Add lookup subregion of VirtIOPCIRegion MR instead of only lookup container MR.
Fixes: a93c8d8 ("virtio-pci: Replace modern_as with direct access to modern_bar")
Co-developed-by: Zuo Boqun <zuoboqun@baidu.com>
Signed-off-by: Gao Shiyuan <gaoshiyuan@baidu.com>
Signed-off-by: Zuo Boqun <zuoboqun@baidu.com>
Message-Id: <20240903120304.97833-1-gaoshiyuan@baidu.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This allows the vhost_net device which has multiple virtqueues to batch
the setup of all its host notifiers. This significantly reduces the
vhost_net device starting and stoping time, e.g. the time spend
on enabling notifiers reduce from 630ms to 75ms and the time spend on
disabling notifiers reduce from 441ms to 45ms for a VM with 192 vCPUs
and 15 vhost-user-net devices (64vq per device) in our case.
Signed-off-by: zuoboqun <zuoboqun@baidu.com>
Message-Id: <20240816070835.8309-1-zuoboqun@baidu.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Message-Id: <20240814115736.1580337-4-ribalda@chromium.org>
Acked-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
When qemu runs without kvm acceleration the ACPI executions take a great
amount of time. If they take more than the default time (30sec), the
ACPI calls fail and the system might not behave correctly.
Now the _PRT table is computed on the fly. We can drastically reduce the
execution of the _PRT method if we return a pre-computed table.
Without this patch:
[ 51.343484] ACPI Error: Aborting method \_SB.PCI0._PRT due to previous error (AE_AML_LOOP_TIMEOUT) (20230628/psparse-529)
[ 51.527032] ACPI Error: Method execution failed \_SB.PCI0._PRT due to previous error (AE_AML_LOOP_TIMEOUT) (20230628/uteval-68)
[ 51.530049] virtio-pci 0000:00:02.0: can't derive routing for PCI INT A
[ 51.530797] virtio-pci 0000:00:02.0: PCI INT A: no GSI
[ 81.922901] ACPI Error: Aborting method \_SB.PCI0._PRT due to previous error (AE_AML_LOOP_TIMEOUT) (20230628/psparse-529)
[ 82.103534] ACPI Error: Method execution failed \_SB.PCI0._PRT due to previous error (AE_AML_LOOP_TIMEOUT) (20230628/uteval-68)
[ 82.106088] virtio-pci 0000:00:04.0: can't derive routing for PCI INT A
[ 82.106761] virtio-pci 0000:00:04.0: PCI INT A: no GSI
[ 112.192568] ACPI Error: Aborting method \_SB.PCI0._PRT due to previous error (AE_AML_LOOP_TIMEOUT) (20230628/psparse-529)
[ 112.486687] ACPI Error: Method execution failed \_SB.PCI0._PRT due to previous error (AE_AML_LOOP_TIMEOUT) (20230628/uteval-68)
[ 112.489554] virtio-pci 0000:00:05.0: can't derive routing for PCI INT A
[ 112.490027] virtio-pci 0000:00:05.0: PCI INT A: no GSI
[ 142.559448] ACPI Error: Aborting method \_SB.PCI0._PRT due to previous error (AE_AML_LOOP_TIMEOUT) (20230628/psparse-529)
[ 142.718596] ACPI Error: Method execution failed \_SB.PCI0._PRT due to previous error (AE_AML_LOOP_TIMEOUT) (20230628/uteval-68)
[ 142.722889] virtio-pci 0000:00:06.0: can't derive routing for PCI INT A
[ 142.724578] virtio-pci 0000:00:06.0: PCI INT A: no GSI
With this patch:
[ 22.938076] ACPI: \_SB_.LNKB: Enabled at IRQ 10
[ 24.214002] ACPI: \_SB_.LNKD: Enabled at IRQ 11
[ 25.465170] ACPI: \_SB_.LNKA: Enabled at IRQ 10
[ 27.944920] ACPI: \_SB_.LNKC: Enabled at IRQ 11
ACPI disassembly:
Scope (PCI0)
{
Method (_PRT, 0, NotSerialized) // _PRT: PCI Routing Table
{
Return (Package (0x80)
{
Package (0x04)
{
0xFFFF,
Zero,
LNKD,
Zero
},
Package (0x04)
{
0xFFFF,
One,
LNKA,
Zero
},
Package (0x04)
{
0xFFFF,
0x02,
LNKB,
Zero
},
Package (0x04)
{
0xFFFF,
0x03,
LNKC,
Zero
},
Package (0x04)
{
0x0001FFFF,
Zero,
LNKS,
Zero
},
Context: https://lore.kernel.org/virtualization/20240417145544.38d7b482@imammedo.users.ipa.redhat.com/T/#t
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240814115736.1580337-3-ribalda@chromium.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Message-Id: <20240814115736.1580337-2-ribalda@chromium.org>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
In vtd_process_inv_desc(), VTD_INV_DESC_PC and VTD_INV_DESC_PIOTLB are
bypassed without scalable mode check. These two types are not valid
in legacy mode and we should report error.
Fixes: 4a4f219e8a ("intel_iommu: add scalable-mode option to make scalable mode work")
Suggested-by: Yi Liu <yi.l.liu@intel.com>
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Clément Mathieu--Drif<clement.mathieu--drif@eviden.com>
Reviewed-by: Yi Liu <yi.l.liu@intel.com>
Message-Id: <20240814071321.2621384-3-zhenzhong.duan@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
According to spec, invalidation descriptor type is 7bits which is
concatenation of bits[11:9] and bits[3:0] of invalidation descriptor.
Currently we only pick bits[3:0] as the invalidation type and treat
bits[11:9] as reserved zero. This is not a problem for now as bits[11:9]
is zero for all current invalidation types. But it will break if newer
type occupies bits[11:9].
Fix it by taking bits[11:9] into type and make reserved bits check accurate.
Suggested-by: Clément Mathieu--Drif<clement.mathieu--drif@eviden.com>
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Yi Liu <yi.l.liu@intel.com>
Reviewed-by: Clément Mathieu--Drif<clement.mathieu--drif@eviden.com>
Message-Id: <20240814071321.2621384-2-zhenzhong.duan@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
virtio_split_packed_update_used_idx should be
virtio_queue_split_update_used_idx like
virtio_split_packed_update_used_idx.
Signed-off-by: Wenyu Huang <huangwenyuu@outlook.com>
Message-Id: <TYBP286MB036536B9015994AA5F3E4495ACB22@TYBP286MB0365.JPNP286.PROD.OUTLOOK.COM>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
When BAR aren't mapped, we get:
(qemu) info pci
Bus 0, device 0, function 0:
Host bridge: PCI device dead:beef
...
BAR4: 32 bit memory at 0xffffffffffffffff [0x00000ffe].
BAR5: I/O at 0xffffffffffffffff [0x0ffe].
Check the BAR is mapped comparing its address to PCI_BAR_UNMAPPED
which is what the PCI layer uses for unmapped BARs.
See pci_bar_address and pci_update_mappings implementations and
in "hw/pci/pci.h":
typedef struct PCIIORegion {
pcibus_t addr; /* current PCI mapping address. -1 means not mapped */
#define PCI_BAR_UNMAPPED (~(pcibus_t)0)
...
This improves the logging, not displaying bogus sizes:
(qemu) info pci
Bus 0, device 0, function 0:
Host bridge: PCI device dead:beef
...
BAR4: 32 bit memory (not mapped)
BAR5: I/O (not mapped)
Remove trailing dot which is not used in other commands format.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20240801131449.51328-1-philmd@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
- remove docker-armel-cross
- update i686 and mipsel images to bookworm
- use docker-all-test-cross for mips64le tests
- fix duplicated line in docs
- update gitlab-runner ansible script
- support MTE in gdbstub for system mode
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAmbgye8ACgkQ+9DbCVqe
KkTesQf/WSTYAelzJWlEo0EPg5agokephfza4vdmweDujOT8MYPF9qxfsxoiTVA8
GTtTOod9iqmY/4/EPKIqUtZH38oaX5h9on2FhSssOMy+N4lUADJ+CcHHMSj4BuUt
jTXDSa9e5aj0m/yqg2PjF8U12Sygf7dKJturGLOWoWR5qa3xpQ2a6c3CkfxO3RQK
yTBfIZk47iOrVvEX8chsRzpkpiXY6/S5hkZZwcqbXcUMKH2s0po9Yg031vE3yN+g
kxJ7/mFNl49E/fqYdRahhyBDORlltCglCHsacxxa/4a216wOsNKyV3QLCJMjq8yO
3/SPu0p+UouSFcASwTUt5XIo0G0TcA==
=7W1s
-----END PGP SIGNATURE-----
Merge tag 'pull-testing-gdbstub-oct-100924-1' of https://gitlab.com/stsquad/qemu into staging
testing and gdbstub updates:
- remove docker-armel-cross
- update i686 and mipsel images to bookworm
- use docker-all-test-cross for mips64le tests
- fix duplicated line in docs
- update gitlab-runner ansible script
- support MTE in gdbstub for system mode
# -----BEGIN PGP SIGNATURE-----
#
# iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAmbgye8ACgkQ+9DbCVqe
# KkTesQf/WSTYAelzJWlEo0EPg5agokephfza4vdmweDujOT8MYPF9qxfsxoiTVA8
# GTtTOod9iqmY/4/EPKIqUtZH38oaX5h9on2FhSssOMy+N4lUADJ+CcHHMSj4BuUt
# jTXDSa9e5aj0m/yqg2PjF8U12Sygf7dKJturGLOWoWR5qa3xpQ2a6c3CkfxO3RQK
# yTBfIZk47iOrVvEX8chsRzpkpiXY6/S5hkZZwcqbXcUMKH2s0po9Yg031vE3yN+g
# kxJ7/mFNl49E/fqYdRahhyBDORlltCglCHsacxxa/4a216wOsNKyV3QLCJMjq8yO
# 3/SPu0p+UouSFcASwTUt5XIo0G0TcA==
# =7W1s
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 10 Sep 2024 23:36:31 BST
# gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [full]
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44
* tag 'pull-testing-gdbstub-oct-100924-1' of https://gitlab.com/stsquad/qemu:
tests/tcg/aarch64: Extend MTE gdbstub tests to system mode
tests/tcg/aarch64: Improve linker script organization
tests/guest-debug: Support passing arguments to the GDB test script
gdbstub: Add support for MTE in system mode
gdbstub: Use specific MMU index when probing MTE addresses
scripts/ci: update the gitlab-runner playbook
docs/devel: fix duplicate line
tests/docker: use debian-all-test-cross for mips64el tests
tests/docker: update debian i686 and mipsel images to bookworm
tests/docker: remove debian-armel-cross
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When the devfn is already assigned in the command line, the
do_pci_register_device() may verify if the function 0 is already occupied.
However, when devfn < 0, the verification is skipped because it is part of
the last "else if".
For instance, suppose there is already a device at addr=00.00 of a port.
-device pcie-root-port,bus=pcie.0,chassis=115,id=port01,addr=0e.00 \
-device virtio-net-pci,bus=port01,id=vnet01,addr=00.00 \
When 'addr' is specified for the 2nd device, the hotplug is denied.
(qemu) device_add virtio-net-pci,bus=port01,id=vnet02,addr=01.00
Error: PCI: slot 0 function 0 already occupied by virtio-net-pci, new func virtio-net-pci cannot be exposed to guest.
When 'addr' is automatically assigned, the hotplug is not denied. This is
because the verification is skipped.
(qemu) device_add virtio-net-pci,bus=port01,id=vnet02
warning: PCI: slot 1 is not valid for virtio-net-pci, parent device only allows plugging into slot 0.
Fix the issue by moving the verification into an independent 'if'
statement.
Fixes: 3f1e1478db ("enable multi-function hot-add")
Reported-by: Aswin Unnikrishnan <aswin.u.unnikrishnan@oracle.com>
Signed-off-by: Dongli Zhang <dongli.zhang@oracle.com>
Message-Id: <20240708041056.54504-1-dongli.zhang@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
To avoid a warning about unfreed qemu_irq embed the i8259 irq in the
device state instead of allocating it.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-Id: <b70b9e72063b4dd4005bf4bc040b84f2bb617bf4.1719690591.git.balaton@eik.bme.hu>
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
To allow embedding a qemu_irq in a struct move its definition to the
header and add a function to init it in place without allocating it.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-Id: <e3ffd0f6ef8845d0f7247c9b6ff33f7ee8b432cf.1719690591.git.balaton@eik.bme.hu>
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
The current FreeBSD CI jobs are failing installation since the
"opencv" package is now missing there. Updating to 14.1 fixes
the issue.
Message-Id: <20240911090149.286257-1-thuth@redhat.com>
Reviewed-by: Li-Wen Hsu <lwhsu@FreeBSD.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Some systems (like OpenBSD) do not have the sha256sum or sha512sum programs
installed by default, or use different names for those. Use the Python
hashlib instead so we don't have to rely on the external programs.
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Message-ID: <20240910201742.239559-1-thuth@redhat.com>
Reviewed-by: Brian Cain <bcain@quicinc.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
has_cmd returns a tuple, not a boolean value. This fixes a crash when
e.g. "tesseract" is not available in the test_m68k_nextcube test.
Reported-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20240910075820.51346-1-thuth@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
This test handles both, aarch64 and x86_64, with the same test code
(apart from some initial setup), so don't split this file by target
but add a check for self.arch in the main test function.
Message-ID: <20240903051333.102494-1-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
We've got to do_test_advcal_2018() here now that the test resides
in a separate file. Also switch back to the original URL (since
the site did not vanish as originally expected) and update the
hashsum to use SHA256.
Message-ID: <20240906180549.792832-15-thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
We've got to do_test_advcal_2018() here now that the test resides
in a separate file. Also switch back to the original URL (since
the site did not vanish as originally expected) and update the
hashsum to use SHA256.
Message-ID: <20240906180549.792832-14-thuth@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Straight forward conversion, just switch to SHA256 hashsum now.
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240906180549.792832-13-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Straight forward conversion. Update the SHA1 hashes to SHA256
hashes since SHA1 should not be used anymore nowadays.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240826221058.75126-5-philmd@linaro.org>
[thuth: Use LinuxKernelTest class]
Message-ID: <20240906180549.792832-12-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Straight forward conversion. Update the SHA1 hashes to SHA256
hashes since SHA1 should not be used anymore nowadays.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240826221058.75126-4-philmd@linaro.org>
[thuth: Use the LinuxKernelTest class]
Message-ID: <20240906180549.792832-11-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Straight forward conversion. Update the SHA1 hashes to SHA256
hashes since SHA1 should not be used anymore nowadays.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240826221058.75126-3-philmd@linaro.org>
[thuth: Use LinuxKernelTest class]
Message-ID: <20240906180549.792832-10-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Straight forward conversion. Update the SHA1 hashes to
SHA256 hashes since SHA1 should not be used anymore nowadays.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240827094905.80648-8-philmd@linaro.org>
[thuth: Use LinuxKernelTest class]
Message-ID: <20240906180549.792832-9-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Straight forward conversion. Update the SHA1 hashes to
SHA256 hashes since SHA1 should not be used anymore nowadays.
$ QEMU_TEST_ALLOW_UNTRUSTED_CODE=1 \
make check-functional-mipsel
...
▶ 4/4 test_mipsel_malta.MaltaMachineConsole.test_mips_malta32el_nanomips_16k_up OK
▶ 4/4 test_mipsel_malta.MaltaMachineConsole.test_mips_malta32el_nanomips_4k OK
▶ 4/4 test_mipsel_malta.MaltaMachineConsole.test_mips_malta32el_nanomips_64k_dbg OK
▶ 4/4 test_mipsel_malta.MaltaMachineYAMON.test_mipsel_malta_yamon OK
4/4 qemu:func-thorough+func-mipsel-thorough+thorough / func-mipsel-mipsel_malta OK 9.95s 4 subtests passed
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240827094905.80648-7-philmd@linaro.org>
[thuth: Use LinuxKernelTest]
Message-ID: <20240906180549.792832-8-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Straight forward conversion using the Python standard zipfile
module instead of avocado.utils package. Update the SHA1 hashes
to SHA256 hashes since SHA1 should not be used anymore nowadays.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240827094905.80648-6-philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20240906180549.792832-7-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Straight forward conversion. Update the SHA1 hashes to
SHA256 hashes since SHA1 should not be used anymore nowadays.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240827094905.80648-5-philmd@linaro.org>
Message-ID: <20240906180549.792832-6-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Straight forward conversion. Update the SHA1 hashes to SHA256
hashes since SHA1 should not be used anymore nowadays.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240827094905.80648-4-philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20240906180549.792832-5-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Straight forward conversion. Update the SHA1 hashes to
SHA256 hashes since SHA1 should not be used anymore nowadays.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240827094905.80648-3-philmd@linaro.org>
[thuth: Use LinuxKernelTest class for this test]
Message-ID: <20240906180549.792832-4-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Just had to update the asset checksum to use SHA256 instead of SHA1,
but apart from that it is a pretty much straightforward conversion.
Message-ID: <20240906180549.792832-3-thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Copy the LinuxKernelTest from tests/acceptance/boot_linux_console.py
to be able to convert the related tests to the functional test framework
in the following patches.
Message-ID: <20240906180549.792832-2-thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The Meson section has plenty of reviewers, and in order to reduce the
load on my Inbox a little bit, I'm stepping back as a reviewer here.
Message-ID: <20240906155900.742157-1-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Finally taking this off my to-do list. It’s been a privilege to be part
of this project, but I am no longer actively involved in reviewing
Python code here, so I believe it's best to update the list to reflect
the current maintainers.
Please, feel free to reach out if any questions arise.
Signed-off-by: Beraldo Leal <bleal@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240819150035.2180786-1-bleal@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Running "make distclean" in the build tree currently fails since this
tries to run the "distclean" target in the contrib/plugins/ folder, too,
but the Makefile there is missing this target. Thus add 'distclean' there
to fix this issue.
And to avoid regressions with "make distclean", add this command to one
of the build jobs, too.
Message-ID: <20240902154749.73876-1-thuth@redhat.com>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240819112141.13786-1-philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
With 8e466dd092 and 23ef50ae2d, we disable function pointer
sanitization in CI because the qemu code base does not support it.
We must disable this for normal usage of --enable-ubsan as well,
so move it there.
Append options rather than prepend, since all of this requires
proper ordering of options.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20240813095216.306555-3-richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
We do not always want both address and undefined behavior
sanitizers running at the same time.
For the gitlab custom-runners, drop to only --enable-ubsan.
These jobs are not run by default, but as will be obvious in the
next patch, we don't run ASan on x86 either, and it seems wrong
to hold aarch64 and s390x to a different standard.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20240813095216.306555-2-richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Extend MTE gdbstub tests to also run in system mode (share tests between
user mode and system mode). The tests will only run if a version of GDB
that supports MTE on baremetal is available in the test environment and
if available compiler supports the 'memtag' flag
(-march=armv8.5-a+memtag).
For the tests running in system mode, a page that supports MTE ops. is
necessary. Therefore, an MTE-enabled page is made available (mapped) in
the third 2 MB chunk of the second 1 GB space in the flat mapping set in
boot.S. A new binary, mte.S, is also introduced for the tests. It links
against boot.S and is executed by QEMU in system mode.
Signed-off-by: Gustavo Romero <gustavo.romero@linaro.org>
Message-Id: <20240906143316.657436-6-gustavo.romero@linaro.org>
[AJB: fix stray _]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240910173900.4154726-11-alex.bennee@linaro.org>
This commit adds support for passing arguments to the GDB test scripts
so it's possible to parse the args in an "argparse way" in the test
scripts launched by the runner. The arguments should be preceded by --
when passed to the runner. For example, passing "--help" arg to the
GDB_TEST_SCRIPT:
run-test.py [...] --test <GDB_TEST_SCRIPT> -- --help
The test script should not use the argparse module directly but import
arg_parser from test_gdbstub module. arg_parser then can be used just
like the argparse.ArgumentParser class:
from test_gdbstub import arg_parser
p = arg_parser(prog="test-mytest.py", description="My test.")
p.add_argument("--vowel", help="Select vowel",
required=True, choices=['a','e','i','o','u'])
[...]
The arg_parser allows a smooth and informative exit if, for instance,
the caller of the runner script passes an invalid argument or misses a
required argument by the test script.
Signed-off-by: Gustavo Romero <gustavo.romero@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240906143316.657436-4-gustavo.romero@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240910173900.4154726-9-alex.bennee@linaro.org>
