Commit Graph

114 Commits

Author SHA1 Message Date
Claudio Imbrenda
1ffed98f24 s390x/sclp: clean up sclp masks
Introduce an sccb_mask_t to be used for SCLP event masks instead of just
unsigned int or uint32_t. This will allow later to extend the mask with
more ease.

Signed-off-by: Claudio Imbrenda <imbrenda@linux.vnet.ibm.com>
Message-Id: <1519407778-23095-3-git-send-email-imbrenda@linux.vnet.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2018-03-08 15:49:23 +01:00
Nia Alarie
2231384e56 s390x/sclpconsole: Remove dead code - remove exit handlers
The other event handlers (quiesce and cpu) do not define these
handlers, and this one does nothing, so it can be removed.

Signed-off-by: Nia Alarie <nia.alarie@gmail.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Message-Id: <20180306100721.19419-1-nia.alarie@gmail.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2018-03-08 15:49:23 +01:00
Cornelia Huck
3e65a3c283 s390x: remove s390_get_memslot_count
Not needed anymore after removal of the memory hotplug code.

Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2018-02-26 12:55:26 +01:00
David Hildenbrand
82fab5c5b9 s390x/sclp: remove memory hotplug support
From an architecture point of view, nothing can be mapped into the address
space on s390x. All there is is memory. Therefore there is also not really
an interface to communicate such information to the guest. All we can do is
specify the maximum ram address and guests can probe in that range if
memory is available and usable (TPROT).

Also memory hotplug is strange. The guest can decide at some point in
time to add / remove memory in some range. While the hypervisor can deny
to online an increment, all increments have to be predefined and there is
no way of telling the guest about a newly "hotplugged" increment. So if we
specify right now e.g.
    -m 2G,slots=2,maxmem=20G
An ordinary fedora guest will happily online (hotplug) all memory,
resulting in a guest consuming 20G. So it really behaves rather like
    -m 22G
There is no way to hotplug memory from the outside like on other
architectures. This is of course bad for upper management layers.

As the guest can create/delete memory regions while it is running, of
course migration support is not available and tricky to implement.

With virtualization, it is different. We might want to map something
into guest address space (e.g. fake DAX devices) and not detect it
automatically as memory. So we really want to use the maxmem and slots
parameter just like on all other architectures. Such devices will have
to expose the applicable memory range themselves. To finally be able to
provide memory hotplug to guests, we will need a new paravirtualized
interface to do that (e.g. something into the direction of virtio-mem).

This implies, that maxmem cannot be used for s390x memory hotplug
anymore and has to go. This simplifies the code quite a bit.

As migration support is not working, this change cannot really break
migration as guests without slots and maxmem don't see the SCLP
features. Also, the ram size calculation does not change.

Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20180219174231.10874-1-david@redhat.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Matthew Rosato <mjrosato@linux.vnet.ibm.com>
[CH: tweaked patch description, as discussed on list]
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2018-02-26 12:55:26 +01:00
Peter Maydell
7e0019a719 Miscellaneous patches for 2018-02-07
-----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJafZmjAAoJEDhwtADrkYZTuvkP/i8gYzquYW/8u0XiGjQdi0VM
 cZzxqLe9DSxfjRO9p0D11uLQmw3js8z60mi++1NOhtYTn4P/htsgXLrrxrLS8U0I
 b+mD6LeqGN2miCKWy4X/w52S0krW05ROJMb/s+OQP7aJu/OA+t6QXM6jzIPOnFa+
 GrxFesOizvjLVONvmI8nbUKXayJ77rB8ctsuCjmbMO1XkxMLPWLchduswFH7ywbL
 ZJwUK3v1x+R0Apvy7y4f8e6aamreABtAjuD53zoS1PmLfZ4dvgYVJkhimIGsVjpA
 8AGCbazsIWl7YLJ2dghXaVE2gwV3LrwTPhoF0YeSjrJ2f4TE7NPCaPZW3C9yTtQC
 YEiD4cG5HNE7HhBRIImmTvOGU7sSmYwJQ4+5yGKtJGlBGRSbYP2upWf3nEsOnGPx
 TkdcsEPQHEP/YuJlZpO4jfdUiBAQsbmyY3xnMvdpfhDJRGSB7UwQ1xTgmjIXOr15
 6Zv4NaWB0JInGhoEAra4Jdld3fJ0Nh+XAXITAPogppipvxmIYz9AxZTjhu0cQWX6
 dDvk3FSOuC8Y+r/6UxQkAwCNAld+GilAABgHtXQjx8b8ySlE98EKuvcmPaH4pemC
 K0YoRF32rIoDLbh6xg++ior7+eABrk9STlqCI/3SSEgDr0loTyXnI5KBBNoz+Jjw
 AU2c5RYvNOqEGT42bL/C
 =DMbf
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/armbru/tags/pull-misc-2018-02-07-v4' into staging

Miscellaneous patches for 2018-02-07

# gpg: Signature made Fri 09 Feb 2018 12:52:51 GMT
# gpg:                using RSA key 3870B400EB918653
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>"
# gpg:                 aka "Markus Armbruster <armbru@pond.sub.org>"
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867  4E5F 3870 B400 EB91 8653

* remotes/armbru/tags/pull-misc-2018-02-07-v4:
  Move include qemu/option.h from qemu-common.h to actual users
  Drop superfluous includes of qapi/qmp/qjson.h
  Drop superfluous includes of qapi/qmp/dispatch.h
  Include qapi/qmp/qnull.h exactly where needed
  Include qapi/qmp/qnum.h exactly where needed
  Include qapi/qmp/qbool.h exactly where needed
  Include qapi/qmp/qstring.h exactly where needed
  Include qapi/qmp/qdict.h exactly where needed
  Include qapi/qmp/qlist.h exactly where needed
  Include qapi/qmp/qobject.h exactly where needed
  qdict qlist: Make most helper macros functions
  Eliminate qapi/qmp/types.h
  Typedef the subtypes of QObject in qemu/typedefs.h, too
  Include qmp-commands.h exactly where needed
  Drop superfluous includes of qapi/qmp/qerror.h
  Include qapi/error.h exactly where needed
  Drop superfluous includes of qapi-types.h and test-qapi-types.h
  Clean up includes
  Use #include "..." for our own headers, <...> for others
  vnc: use stubs for CONFIG_VNC=n dummy functions

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-02-09 14:39:09 +00:00
David Hildenbrand
6762808fda s390x/flic: cache the common flic class in a central function
This avoids tons of conversions when handling interrupts.

Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20180129125623.21729-19-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2018-02-09 09:37:13 +01:00
David Hildenbrand
f68ecdd4f3 s390x/tcg: cache the qemu flic in a central function
This avoids tons of conversions when handling interrupts.

Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20180129125623.21729-17-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2018-02-09 09:37:13 +01:00
David Hildenbrand
b194e44785 s390x/flic: make floating interrupts on TCG actually floating
Move floating interrupt handling into the flic. Floating interrupts
will now be considered by all CPUs, not just CPU #0. While at it, convert
I/O interrupts to use a list and make sure we properly consider I/O
sub-classes in s390_cpu_has_io_int().

Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20180129125623.21729-9-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2018-02-09 09:37:13 +01:00
David Hildenbrand
e6505d5395 s390x/flic: factor out injection of floating interrupts
Let the flic device handle it internally. This will allow us to later
on store floating interrupts in the flic for the TCG case.

This now also simplifies kvm.c. All that's left is the fallback
interface for floating interrupts, which is now triggered directly via
the flic in case anything goes wrong.

Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20180129125623.21729-6-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2018-02-09 09:37:13 +01:00
David Hildenbrand
e2ac12f014 s390x/flic: simplify flic initialization
This makes it clearer, which device is used for which accelerator.

Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20180129125623.21729-3-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2018-02-09 09:37:13 +01:00
Markus Armbruster
d8e39b7062 Use #include "..." for our own headers, <...> for others
System headers should be included with <...>, our own headers with
"...".  Offenders tracked down with an ugly, brittle and probably
buggy Perl script.  Previous iteration was commit a9c94277f0.

Delete inclusions of "string.h" and "strings.h" instead of fixing them
to <string.h> and <strings.h>, because we always include these via
osdep.h.

Put the cleaned up system header includes first.

While there, separate #include from file comment with exactly one
blank line.

Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180201111846.21846-2-armbru@redhat.com>
2018-02-09 05:05:11 +01:00
Halil Pasic
99577c492f s390x/css: unrestrict cssids
The default css 0xfe is currently restricted to virtual subchannel
devices. The hope when the decision was made was, that non-virtual
subchannel devices will come around when guest can exploit multiple
channel subsystems. Since the guests generally don't do, the pain
of the partitioned (cssid) namespace outweighs the gain.

Let us remove the corresponding restrictions (virtual devices
can be put only in 0xfe and non-virtual devices in any css except
the 0xfe -- while s390-squash-mcss then remaps everything to cssid 0).

At the same time, change our schema for generating css bus ids to put
both virtual and non-virtual devices into the default css (spilling over
into other css images, if needed). The intention is to deprecate
s390-squash-mcss. With this change devices without a specified devno
won't end up hidden to guests not supporting multiple channel subsystems,
unless this can not be avoided (default css full).

Let us also advertise the changes to the management software (so it can
tell are cssids unrestricted or restricted).

The adverse effect of getting rid of the restriction on migration should
not be too severe.  Vfio-ccw devices are not live-migratable yet, and for
virtual devices using the extra freedom would only make sense with the
aforementioned guest support in place.

The auto-generated bus ids are affected by both changes. We hope to not
encounter any auto-generated bus ids in production as Libvirt is always
explicit about the bus id.  Since 8ed179c937 ("s390x/css: catch section
mismatch on load", 2017-05-18) the worst that can happen because the same
device ended up having a different bus id is a cleanly failed migration.
I find it hard to reason about the impact of changed auto-generated bus
ids on migration for command line users as I don't know which rules is
such an user supposed to follow.

Another pain-point is down- or upgrade of QEMU for command line users.
The old way and the new way of doing vfio-ccw are mutually incompatible.
Libvirt is only going to support the new way, so for libvirt users, the
possible problems at QEMU downgrade are the following. If a domain
contains virtual devices placed into a css different than 0xfe the domain
will refuse to start with a QEMU not having this patch. Putting devices
into a css different that 0xfe however won't make much sense in the near
future (guest support). Libvirt will refuse to do vfio-ccw with a QEMU
not having this patch. This is business as usual.

Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com>
Message-Id: <20171206144438.28908-2-pasic@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-12-14 17:56:54 +01:00
David Hildenbrand
fc21eb6bd9 s390x/tcg: rip out dead tpi code
It is broken and not even wired up. We'll add a new handler soon, but
that will live somewhere else.

Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20171130162744.25442-4-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-12-14 17:56:54 +01:00
Christian Borntraeger
0280b3eb7c s390x/kvm: use cpu model for gscb on compat machines
Starting a guest with
   <os>
    <type arch='s390x' machine='s390-ccw-virtio-2.9'>hvm</type>
  </os>
  <cpu mode='host-model'/>

on an IBM z14 results in

"qemu-system-s390x: Some features requested in the CPU model are not
available in the configuration: gs"

This is because guarded storage is fenced for compat machines that did
not have guarded storage support. While this prevents future migration
abort (by not starting the guest at all), not being able to start a
"host-model" guest is very much unexpected.  As it turns out, even if we
would modify libvirt to not expand the cpu model to contain "gs" for
compat machines, it cannot guarantee that a migration will succeed. For
example if the kernel changes its features (or the user has nested=1 on
one host but not on the other) the migration will fail nevertheless.  So
instead of fencing "gs" for machines <= 2.9 lets allow it for all
machine types that support the CPU model. This will make "host-model"
runnable all the time, while relying on the CPU model to reject invalid
migration attempts. We also need to change the migration for guarded
storage.
Additional discussions about host-model are still pending but are out
of scope of this patch.

Suggested-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Cornelia Huck <Cornelia Huck <cohuck@redhat.com>
Acked-by: Halil Pasic <pasic@linux.vnet.ibm.com>
2017-10-30 09:03:45 +01:00
Halil Pasic
6bb6f19473 s390x: refactor error handling for MSCH handler
Simplify the error handling of the MSCH.  Let the code detecting the
condition tell (in a less ambiguous way) how it's to be handled. No
changes in behavior.

Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Message-Id: <20171017140453.51099-8-pasic@linux.vnet.ibm.com>
[CH: fix return code for fctl != 0]
Reviewed-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-10-20 13:32:10 +02:00
Halil Pasic
ae9f1be3bd s390x: refactor error handling for HSCH handler
Simplify the error handling of the HSCH.  Let the code detecting the
condition tell (in a less ambiguous way) how it's to be handled. No
changes in behavior.

Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Message-Id: <20171017140453.51099-7-pasic@linux.vnet.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-10-20 13:32:10 +02:00
Halil Pasic
773314426e s390x: refactor error handling for CSCH handler
Simplify the error handling of the CSCH.  Let the code detecting the
condition tell (in a less ambiguous way) how it's to be handled. No
changes in behavior.

Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Message-Id: <20171017140453.51099-6-pasic@linux.vnet.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-10-20 13:32:10 +02:00
Halil Pasic
963764081d s390x: refactor error handling for XSCH handler
Simplify the error handling of the XSCH.  Let the code detecting the
condition tell (in a less ambiguous way) how it's to be handled. No
changes in behavior.

Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Message-Id: <20171017140453.51099-5-pasic@linux.vnet.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-10-20 13:32:10 +02:00
Halil Pasic
66dc50f705 s390x: improve error handling for SSCH and RSCH
Simplify the error handling of the SSCH and RSCH handler avoiding
arbitrary and cryptic error codes being used to tell how the instruction
is supposed to end.  Let the code detecting the condition tell how it's
to be handled in a less ambiguous way.  It's best to handle SSCH and RSCH
in one go as the emulation of the two shares a lot of code.

For passthrough this change isn't pure refactoring, but changes the way
kernel reported EFAULT is handled. After clarifying the kernel interface
we decided that EFAULT shall be mapped to unit exception.  Same goes for
unexpected error codes and absence of required ORB flags.

Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Message-Id: <20171017140453.51099-4-pasic@linux.vnet.ibm.com>
Tested-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com>
[CH: cosmetic changes]
Reviewed-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-10-20 13:32:10 +02:00
Halil Pasic
e443ef9f21 s390x/css: IO instr handler ending control
CSS code needs to tell the IO instruction handlers located in ioinst.c
how the emulated instruction should be ended. Currently this is done by
returning generic (POSIX) error codes, and mapping them to outcomes like
condition codes. This makes bugs easy to create and hard to recognize.

As a preparation for moving away from (mis)using generic error codes for
flow control let us introduce a type which tells the instruction
handler function how to end the instruction, in a more straight-forward
and less ambiguous way.

Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Message-Id: <20171017140453.51099-3-pasic@linux.vnet.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com>
[CH: cosmetic changes]
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-10-20 13:32:10 +02:00
Cornelia Huck
67915de9f0 s390x/event-facility: variable-length event masks
The architecture supports masks of variable length for sclp write
event mask. We currently only support 4 byte event masks, as that
is what Linux uses.

Let's extend this to the maximum mask length supported by the
architecture and return 0 to the guest for the mask bits we don't
support in core.

Initial patch by: Cornelia Huck <cornelia.huck@de.ibm.com>

Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Jason J. Herne <jjherne@linux.vnet.ibm.com>
Message-Id: <1507729193-9747-1-git-send-email-jjherne@linux.vnet.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-10-20 13:32:10 +02:00
Halil Pasic
1baa2eb01e s390x/3270: IDA support for 3270 via CcwDataStream
Let us convert the 3270 code so it uses the recently introduced
CcwDataStream abstraction instead of blindly assuming direct data access.

This patch does not change behavior beyond introducing IDA support: for
direct data access CCWs everything stays as-is. (If there are bugs, they
are also preserved).

Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com>
Message-Id: <20170920172314.102710-2-pasic@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-10-06 10:53:02 +02:00
Halil Pasic
62a2554ec2 390x/css: introduce maximum data address checking
The architecture mandates the addresses to be accessed on the first
indirection level (that is, the data addresses without IDA, and the
(M)IDAW addresses with (M)IDA) to be checked against an CCW format
dependent limit maximum address.  If a violation is detected, the storage
access is not to be performed and a channel program check needs to be
generated. As of today, we fail to do this check.

Let us stick even closer to the architecture specification.

Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Message-Id: <20170921180841.24490-5-pasic@linux.vnet.ibm.com>
Reviewed-by: Pierre Morel <pmorel@linux.vnet.ibm.com>
Reviewed-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-10-06 10:53:02 +02:00
Halil Pasic
57065a70d0 s390x/css: introduce css data stream
This is a preparation for introducing handling for indirect data
addressing and modified indirect data addressing (CCW). Here we introduce
an interface which should make the addressing scheme transparent for the
client code. Here we implement only the basic scheme (no IDA or MIDA).

Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Reviewed-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com>
Reviewed-by: Pierre Morel <pmorel@linux.vnet.ibm.com>
Message-Id: <20170921180841.24490-2-pasic@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-10-06 10:53:01 +02:00
David Hildenbrand
53d8e91d64 s390x: move sclp_service_call() to sclp.h
Implemented in sclp.c, so let's move it to the right include file.
Also adjust some includes.

Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170913132417.24384-9-david@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-09-19 18:31:31 +02:00
David Hildenbrand
19c69829d6 s390x: move subsystem_reset() to s390-virtio-ccw.h
Implemented in s390-virtio-ccw.c, so move it to the right header.
We can also drop the extern. Fix up one include.

Reviewed-by: Thomas Huth <thuth@redhat.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170913132417.24384-7-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-09-19 18:31:31 +02:00
David Hildenbrand
f16bbb9bbd s390x/kvm: move KVM declarations and stubs to separate files
Let's do it just like the other architectures. Introduce kvm-stub.c
for stubs and kvm_s390x.h for the declarations.

Change license to GPL2+ and keep copyright notice.

As we are dropping the sysemu/kvm.h include from cpu.h, fix up includes.

Suggested-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170818114353.13455-18-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-08-30 18:23:26 +02:00
Cornelia Huck
80b7a26536 s390x/sclp: properly guard pci-specific functions
If we do not provide zpci, pci reconfiguration via sclp is not available
either. I/O adapter configuration, however, should always be present.

Rename the values that refer to I/O adapter configuration (instead of only
pci) to make things clearer.

Move length checking of the sccb for I/O adapter configuration into the
common sclp code (out of the pci code). This also fixes an issue that
the pci code would refer to a field in the sccb before checking whether
it was actually long enough.

Check for the adapter type in the sccb and return unrecognized adapter
type if the guest tries to issue I/O adapter configure/deconfigure for
a type other than pci or for pci if the zpci facility is not provided.

Reviewed-by: Pierre Morel <pmorel@linux.vnet.ibm.com>
Reviewed-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-08-30 18:23:25 +02:00
Cornelia Huck
5838d65770 s390x/pci: add stubs
Some non-pci code calls into zpci code. Provide some stubs for builds
without pci.

Reviewed-by: Thomas Huth <thuth@redhat.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-08-30 18:23:25 +02:00
Dong Jia Shi
5c8d6f008c s390x/css: generate solicited crw for rchp completion signaling
A successful completion of rchp should signal a solicited channel path
initialized CRW (channel report word), while the current implementation
always generates an un-solicited one. Let's fix this.

Reported-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Signed-off-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com>
Reviewed-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Message-Id: <20170803003527.86979-3-bjsdjshi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-08-30 18:23:25 +02:00
Dong Jia Shi
808e668bbc s390x/css: use macro for event-information pending error recover code
Let's use a macro for the ERC (error recover code) when generating a
Channel Subsystem Event-information pending CRW (channel report word).

While we are at it, let's also add all other ERCs.

Signed-off-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com>
Reviewed-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Message-Id: <20170803003527.86979-2-bjsdjshi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-08-30 18:23:25 +02:00
Peter Maydell
fbc8ea1ed0 s390x/kvm/migration/cpumodel: fixes, enhancements and cleanups
- add a network boot rom for s390 (Thomas Huth)
 - migration of storage attributes like the CMMA used/unused state
 - PCI related enhancements - full support for aen, ais and zpci
 - migration support for css with vmstates (Halil Pasic)
 - cpu model enhancements for cpu features
 - guarded storage support
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.14 (GNU/Linux)
 
 iQIcBAABAgAGBQJZaJ3gAAoJEBF7vIC1phx8VSAP/1zKh7ti4Y2dIVb94c1tvECE
 LRNdCdAPhEqL6zybty85aG04sjAmSu50NGfo5t8AGq1U9WBWrCy7/wWSFdK2GI63
 Umc1fR7aBF9FiFayKONhExaREh6gSWVHZF1RyaPIWnnjRIeX8nqgPEnpdZNiVVrG
 5cKHV2SUd5pMDJUiQdZGZgbgG1c+MWJx2BHoduM+K0UnmFjpyLCL4Rq58Q2Q87Nj
 /+yPSVApFFeMsDpem6DNttE6Msa+V+K+EmRhRKqZNOWrdRKH5vvj6Fl/LSxVtd9c
 CEG+aZGjFd693uP9ge0WmjeUJtVHIGt9xKdeU0d7FijZWehjsIqalLoqapzK8ddF
 h6HJuNsmk/SZF7O9JsbHT3Epyr+7Hk0dx78Ku1GNQuUxtFL93eyIJmRdgz7Zo3Lj
 ZTPJvCA13GjPWtgzG5dG3JH1hiAS+Yai18BgdzGbs+qfMCwPdbWkoqg7sARwAJNe
 50fo/ayJvcmHJnSNO6hErFoU38WctGgO8fWp+oVvD8Um1ny1aBFFuJgJIMf47nhu
 x1IdA6UGrNN0yNC4/UgyYBDV1hfvo/phMdoHqle9AcMmPYOD1DBr0genK/bYbICk
 Dio7og9nKgheLRBHz2u5TuYcCsfE/7rtwZX+iXMvoC7VE7Dqs+Q7Zjwwwtwj4x9F
 FwWuf/Bv1s6IkVLlP8Ow
 =2bOV
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/borntraeger/tags/s390x-20170714' into staging

s390x/kvm/migration/cpumodel: fixes, enhancements and cleanups

- add a network boot rom for s390 (Thomas Huth)
- migration of storage attributes like the CMMA used/unused state
- PCI related enhancements - full support for aen, ais and zpci
- migration support for css with vmstates (Halil Pasic)
- cpu model enhancements for cpu features
- guarded storage support

# gpg: Signature made Fri 14 Jul 2017 11:33:04 BST
# gpg:                using RSA key 0x117BBC80B5A61C7C
# gpg: Good signature from "Christian Borntraeger (IBM) <borntraeger@de.ibm.com>"
# Primary key fingerprint: F922 9381 A334 08F9 DBAB  FBCA 117B BC80 B5A6 1C7C

* remotes/borntraeger/tags/s390x-20170714: (40 commits)
  s390x/gdb: add gs registers
  s390x/arch_dump: also dump guarded storage control block
  s390x/kvm: enable guarded storage
  s390x/kvm: Enable KSS facility for nested virtualization
  s390x/cpumodel: add esop/esop2 to z12 model
  s390x/cpumodel: we are always in zarchitecture mode
  s390x/cpumodel: wire up new hardware features
  s390x/flic: migrate ais states
  s390x/cpumodel: add zpci, aen and ais facilities
  s390x: initialize cpu firstly
  pc-bios/s390: rebuild s390-ccw.img
  pc-bios/s390: add s390-netboot.img
  pc-bios/s390-ccw: Link libnet into the netboot image and do the TFTP load
  pc-bios/s390-ccw: Add virtio-net driver code
  pc-bios/s390-ccw: Add core files for the network bootloading program
  roms/SLOF: Update submodule to latest status
  pc-bios/s390-ccw: Add code for virtio feature negotiation
  pc-bios/s390-ccw: Remove unused structs from virtio.h
  pc-bios/s390-ccw: Move byteswap functions to a separate header
  pc-bios/s390-ccw: Add a write() function for stdio
  ...

Conflicts:
	target/s390x/kvm.c

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-07-14 14:19:35 +01:00
Fan Zhang
62deb62d99 s390x/kvm: enable guarded storage
Introduce guarded storage support for KVM guests on s390.
We need to enable the capability, extend machine check validity,
sigp store-additional-status-at-address, and migration.

The feature is fenced for older machine type versions.

Signed-off-by: Fan Zhang <zhangfan@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2017-07-14 12:29:49 +02:00
Jason J. Herne
6da5c593bb s390x/cpumodel: wire up new hardware features
Some new guest features have been introduced recently. Let's wire
them up in the CPU model.

Signed-off-by: Jason J. Herne <jjherne@linux.vnet.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
[split patch]
2017-07-14 12:29:49 +02:00
Yi Min Zhao
e7be8d4997 s390x/flic: migrate ais states
During migration we should transfer ais states to the target guest.
This patch introduces a subsection to kvm_s390_flic_vmstate and new
vmsd for qemu_flic. The ais states need to be migrated only when
ais is supported.

Signed-off-by: Yi Min Zhao <zyimin@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
2017-07-14 12:29:49 +02:00
Halil Pasic
b5f5a3afb6 s390x/css: use SubchDev.orb
Instead of passing around a pointer to ORB let us simplify some
function signatures by using the previously introduced ORB saved at the
subchannel (SubchDev).

Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Message-Id: <20170711145441.33925-7-pasic@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2017-07-14 12:29:48 +02:00
Halil Pasic
e996583eb3 s390x/css: activate ChannelSubSys migration
Turn on migration for the channel subsystem for the next machine.  For
legacy machines we still have to do things the old way.

Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Message-Id: <20170711145441.33925-6-pasic@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2017-07-14 12:29:48 +02:00
Halil Pasic
ff443fe6b5 s390x/css: add ORB to SubchDev
Since we are going to need a migration compatibility breaking change to
activate ChannelSubSys migration let us use the opportunity to introduce
ORB to the SubchDev before that (otherwise we would need separate
handling e.g. a compat property).

The ORB will be useful for implementing IDA, or async handling of
subchannel work.

Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Reviewed-by: Guenther Hutzl <hutzl@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Message-Id: <20170711145441.33925-5-pasic@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2017-07-14 12:29:48 +02:00
Halil Pasic
52629b3ba8 s390x: add css_migration_enabled to machine class
Currently the migration of the channel subsystem (css) is only partial
and is done by the virtio ccw proxies -- the only migratable css devices
existing at the moment.

With the current work on emulated and passthrough devices we need to
decouple the migration of the channel subsystem state from virtio ccw,
and have a separate section for it. A new section  however necessarily
breaks the migration compatibility.

So let us introduce a switch at the machine class, and put it in 'off'
state for now. We will turn the switch 'on' for future machines once all
preparations are met. For compatibility  machines the switch will stay
'off'.

Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Message-Id: <20170711145441.33925-3-pasic@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2017-07-14 12:29:47 +02:00
Yi Min Zhao
25a08b8ded s390x/css: update css_adapter_interrupt
Let's use the new inject_airq callback of flic to inject adapter
interrupts. For kvm case, if the kernel flic doesn't support the new
interface, the irq routine remains unchanged. For non-kvm case,
qemu-flic handles the suppression process.

Signed-off-by: Yi Min Zhao <zyimin@linux.vnet.ibm.com>
Signed-off-by: Fei Li <sherrylf@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2017-07-14 12:29:47 +02:00
Fei Li
2283f4d67a s390x/sic: realize SIC handling
Currently, we do nothing for the SIC instruction, but we need to
implement it properly. Let's add proper handling in the backend code.

Co-authored-by: Yi Min Zhao <zyimin@linux.vnet.ibm.com>
Signed-off-by: Yi Min Zhao <zyimin@linux.vnet.ibm.com>
Signed-off-by: Fei Li <sherrylf@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2017-07-14 12:29:47 +02:00
Yi Min Zhao
1622ffd515 s390x/flic: introduce inject_airq callback
Let's introduce a specialized way to inject adapter interrupts that,
unlike the common interrupt injection method, allows to take the
characteristics of the adapter into account.

For adapters subject to AIS facility:
- for non-kvm case, we handle the suppression for a given ISC in QEMU.
- for kvm case, we pass adapter id to kvm to do airq injection.

Add add tracepoint for suppressed airq and suppressing airq.

Signed-off-by: Yi Min Zhao <zyimin@linux.vnet.ibm.com>
Signed-off-by: Fei Li <sherrylf@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2017-07-14 12:29:47 +02:00
Fei Li
6c1dd652a6 s390x/flic: introduce modify_ais_mode callback
In order to emulate the adapter interruption suppression (AIS)
facility properly, the guest needs to be able to modify the AIS mask.
Interrupt suppression will be handled via the flic (for kvm, via a
recently introduced kernel backend; for !kvm, in the flic code), so
let's introduce a method to change the mode via the flic interface.

We introduce the 'simm' and 'nimm' fields to QEMUS390FLICState
to store interruption modes for each ISC. Each bit in 'simm' and
'nimm' targets one ISC, and collaboratively indicate three modes:
ALL-Interruptions, SINGLE-Interruption and NO-Interruptions. This
interface can initiate most transitions between the states; transition
from SINGLE-Interruption to NO-Interruptions via adapter interrupt
injection will be introduced in a following patch. The meaningful
combinations are as follows:

    interruption mode | simm bit | nimm bit
    ------------------|----------|----------
             ALL      |    0     |     0
           SINGLE     |    1     |     0
             NO       |    1     |     1

Co-authored-by: Yi Min Zhao <zyimin@linux.vnet.ibm.com>
Signed-off-by: Yi Min Zhao <zyimin@linux.vnet.ibm.com>
Signed-off-by: Fei Li <sherrylf@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2017-07-14 12:29:47 +02:00
Fei Li
1497c16066 s390x: add flags field for registering I/O adapter
Introduce a new 'flags' field to IoAdapter to contain further
characteristics of the adapter, like whether the adapter is subject to
adapter-interruption suppression.

For the kvm case, pass this value in the 'flags' field when
registering an adapter.

Signed-off-by: Fei Li <sherrylf@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2017-07-14 12:29:47 +02:00
Claudio Imbrenda
f860d49753 s390x/migration: Monitor commands for storage attributes
Add an "info" monitor command to non-destructively inspect the state of
the storage attributes of the guest, and a normal command to toggle
migration mode (useful for debugging).

Signed-off-by: Claudio Imbrenda <imbrenda@linux.vnet.ibm.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2017-07-14 12:29:47 +02:00
Claudio Imbrenda
903fd80b03 s390x/migration: Storage attributes device
Storage attributes device, like we have for storage keys.

Signed-off-by: Claudio Imbrenda <imbrenda@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2017-07-14 12:29:47 +02:00
Fam Zheng
1b6b7d109e qdev: Add const qualifier to PropertyInfo definitions
The remaining non-const ones are in e1000e which modifies description at
runtime. They can be addressed separatedly.

Signed-off-by: Fam Zheng <famz@redhat.com>
Message-Id: <20170714021509.23681-6-famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-07-14 12:04:42 +02:00
Halil Pasic
517ff12c7d s390x: vmstatify config migration for virtio-ccw
Let's vmstatify virtio_ccw_save_config and virtio_ccw_load_config for
flexibility (extending using subsections) and for fun.

To achieve this we need to hack the config_vector, which is VirtIODevice
(that is common virtio) state, in the middle of the VirtioCcwDevice state
representation.  This is somewhat ugly, but we have no choice because the
stream format needs to be preserved.

Almost no changes in behavior. Exception is everything that comes with
vmstate like extra bookkeeping about what's in the stream, and maybe some
extra checks and better error reporting.

Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Message-Id: <20170703213414.94298-1-pasic@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2017-07-05 12:16:55 +02:00
Cornelia Huck
4e19b57b0e s390x/css: fence off MIDA
MIDA (modified indirect data addressing) is an optional facility, and
we (currently) don't support it. Let's post an operand exception if
the guest tries to set it in the orb and a channel program check
if it is set in a ccw, as specified in the Principles of Operation.

Reviewed-by: Claudio Imbrenda <imbrenda@linux.vnet.ibm.com>
Reviewed-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2017-06-06 10:17:11 +02:00
Xiao Feng Ren
bab482d740 s390x/css: ccw translation infrastructure
Implement a basic infrastructure of handling channel I/O instruction
interception for passed through subchannels:
1. Branch the code path of instruction interception handling by
   SubChannel type.
2. For a passed-through subchannel, issue the ORB to kernel to do ccw
   translation and perform an I/O operation.
3. Assign different condition code based on the I/O result, or
   trigger a program check.

Signed-off-by: Xiao Feng Ren <renxiaof@linux.vnet.ibm.com>
Signed-off-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com>
Message-Id: <20170517004813.58227-12-bjsdjshi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2017-05-19 12:29:01 +02:00