Migration downtime estimation is calculated based on bandwidth and
remaining migration data. This assumes that loading of migration data in
the destination takes a negligible amount of time and that downtime
depends only on network speed.
While this may be true for RAM, it's not necessarily true for other
migrated devices. For example, loading the data of a VFIO device in the
destination might require from the device to allocate resources, prepare
internal data structures and so on. These operations can take a
significant amount of time which can increase migration downtime.
This patch adds a new capability "switchover ack" that prevents the
source from stopping the VM and completing the migration until an ACK
is received from the destination that it's OK to do so.
This can be used by migrated devices in various ways to reduce downtime.
For example, a device can send initial precopy metadata to pre-allocate
resources in the destination and use this capability to make sure that
the pre-allocation is completed before the source VM is stopped, so it
will have full effect.
This new capability relies on the return path capability to communicate
from the destination back to the source.
The actual implementation of the capability will be added in the
following patches.
Signed-off-by: Avihai Horon <avihaih@nvidia.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Tested-by: YangHang Liu <yanghliu@redhat.com>
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
migrate_ignore_shared() is an optimization that avoids copying memory
that is visible and can be mapped on the target. However, a
memory-backend-ram or a memory-backend-memfd block with the RAM_SHARED
flag set is not migrated when migrate_ignore_shared() is true. This is
wrong, because the block has no named backing store, and its contents will
be lost. To fix, ignore shared memory iff it is a named file. Define a
new flag RAM_NAMED_FILE to distinguish this case.
Signed-off-by: Steve Sistare <steven.sistare@oracle.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Message-Id: <1686151116-253260-1-git-send-email-steven.sistare@oracle.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
We don't allow to use x-colo capability when replication is not
configured. So, no reason to build COLO when replication is disabled,
it's unusable in this case.
Note also that the check in migrate_caps_check() is not the only
restriction: some functions in migration/colo.c will just abort if
called with not defined CONFIG_REPLICATION, for example:
migration_iteration_finish()
case MIGRATION_STATUS_COLO:
migrate_start_colo_process()
colo_process_checkpoint()
abort()
It could probably make sense to have possibility to enable COLO without
REPLICATION, but this requires deeper audit of colo & replication code,
which may be done later if needed.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Acked-by: Dr. David Alan Gilbert <dave@treblig.org>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20230428194928.1426370-4-vsementsov@yandex-team.ru>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Change
# @name: Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed
# do eiusmod tempor incididunt ut labore et dolore magna aliqua.
to
# @name: Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed
# do eiusmod tempor incididunt ut labore et dolore magna aliqua.
See recent commit "qapi: Relax doc string @name: description
indentation rules" for rationale.
Reflow paragraphs to 70 columns width, and consistently use two spaces
to separate sentences.
To check the generated documentation does not change, I compared the
generated HTML before and after this commit with "wdiff -3". Finds no
differences. Comparing with diff is not useful, as the reflown
paragraphs are visible there.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20230428105429.1687850-18-armbru@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Acked-by: Lukas Straub <lukasstraub2@web.de>
[Straightforward conflicts in qapi/audio.json qapi/misc-target.json
qapi/run-state.json resolved]
MigrateSetParameters has a TODO comment sitting right behind its doc
comment. I wrote it this way to keep it out of the manual, but that
reason is not obvious.
The previous commit (sphinx/qapidoc: Do not emit TODO sections into
user manuals) lets me move it into the doc comment as a TODO section.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20230428105429.1687850-8-armbru@redhat.com>
Reviewed-by: Ani Sinha <anisinha@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Section tags are case sensitive and end with a colon. Screwing up
either gets them interpreted as ordinary paragraph. Fix a few.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20230425064223.820979-15-armbru@redhat.com>
A few examples neglect to prefix QMP input with '->'. Fix that.
Two examples have extra space after '<-'. Delete it.
A few examples neglect to show output. Provide some. The example
output for query-vcpu-dirty-limit could use further improvement. Add
a TODO comment.
Use "Examples:" instead of "Example:" where multiple examples are
given.
One example section numbers its two examples. Not done elsewhere;
drop.
Another example section separates them with "or". Likewise.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20230425064223.820979-8-armbru@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
query-cpu-definitions returns a list of CpuDefinitionInfo, but
documentation claims CpuDefInfo, which doesn't exist.
query-migrate-capabilities returns a list of
MigrationCapabilityStatus, but documentation claims
MigrationCapabilitiesStatus, which doesn't exist.
balloon and query-balloon can fail with KVMMissingCap, but
documentation claims KvmMissingCap, which doesn't exist.
Fix the documentation.
Fixes: e4e31c6324 (qapi: add query-cpu-definitions command (v2))
Fixes: bbf6da32b5 (Add migration capabilities)
Fixes: d72f326431 (qapi: Convert balloon)
Fixes: 96637bcdf9 (qapi: Convert query-balloon)
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-Id: <20230425064223.820979-4-armbru@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
It has nothing to do with migration, except for the "migrate" in the
name of the command. Move it with the rest of the ui commands.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Introduce interface query-migrationthreads. The interface is used
to query information about migration threads and returns with
migration thread's name and its id.
Introduce threadinfo.c to manage threads with migration.
Signed-off-by: Jiang Jiacheng <jiangjiacheng@huawei.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
I've used real timestamp and changing them one by one so they would
not be all equal.
Problem was noticed when using the example as a test case for Go
bindings.
Signed-off-by: Victor Toso <victortoso@redhat.com>
Message-Id: <20220901085840.22520-11-victortoso@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Leonardo Bras <leobras@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20220711211112.18951-3-leobras@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Firstly, postcopy already preempts precopy due to the fact that we do
unqueue_page() first before looking into dirty bits.
However that's not enough, e.g., when there're host huge page enabled, when
sending a precopy huge page, a postcopy request needs to wait until the whole
huge page that is sending to finish. That could introduce quite some delay,
the bigger the huge page is the larger delay it'll bring.
This patch adds a new capability to allow postcopy requests to preempt existing
precopy page during sending a huge page, so that postcopy requests can be
serviced even faster.
Meanwhile to send it even faster, bypass the precopy stream by providing a
standalone postcopy socket for sending requested pages.
Since the new behavior will not be compatible with the old behavior, this will
not be the default, it's enabled only when the new capability is set on both
src/dst QEMUs.
This patch only adds the capability itself, the logic will be added in follow
up patches.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20220707185342.26794-2-peterx@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Implement dirtyrate calculation periodically basing on
dirty-ring and throttle virtual CPU until it reachs the quota
dirty page rate given by user.
Introduce qmp commands "set-vcpu-dirty-limit",
"cancel-vcpu-dirty-limit", "query-vcpu-dirty-limit"
to enable, disable, query dirty page limit for virtual CPU.
Meanwhile, introduce corresponding hmp commands
"set_vcpu_dirty_limit", "cancel_vcpu_dirty_limit",
"info vcpu_dirty_limit" so the feature can be more usable.
"query-vcpu-dirty-limit" success depends on enabling dirty
page rate limit, so just add it to the list of skipped
command to ensure qmp-cmd-test run successfully.
Signed-off-by: Hyman Huang(黄勇) <huangy81@chinatelecom.cn>
Acked-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Message-Id: <4143f26706d413dd29db0b672fe58b3d3fbe34bc.1656177590.git.huangy81@chinatelecom.cn>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
When originally implemented, zero_copy_send was designed as a Migration
paramenter.
But taking into account how is that supposed to work, and how
the difference between a capability and a parameter, it only makes sense
that zero-copy-send would work better as a capability.
Taking into account how recently the change got merged, it was decided
that it's still time to make it right, and convert zero_copy_send into
a Migration capability.
Signed-off-by: Leonardo Bras <leobras@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
dgilbert: always define the capability, even on non-Linux but error if
set; avoids build problems with the capability
(This replaces the 28th April through 10th May sets)
Compared to that last set it just has the Alpine
uring check that Leo has added; although that's also
now fixed upstream in Alpine.
It contains:
TLS test fixes from Dan
Zerocopy migration feature from Leo
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
-----BEGIN PGP SIGNATURE-----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=Axhk
-----END PGP SIGNATURE-----
Merge tag 'pull-migration-20220516a' of https://gitlab.com/dagrh/qemu into staging
Migration pull 2022-05-16
(This replaces the 28th April through 10th May sets)
Compared to that last set it just has the Alpine
uring check that Leo has added; although that's also
now fixed upstream in Alpine.
It contains:
TLS test fixes from Dan
Zerocopy migration feature from Leo
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEERfXHG0oMt/uXep+pBRYzHrxb/ecFAmKCY80ACgkQBRYzHrxb
# /eeEEhAAoUogch7ifxFItr1EA0AU6Sgd3Dcn8wY9pm0NySVg7OcIpk1H++A3CgIh
# bubJSwRmpIxGw+5q5w5OvBukFCGYMlAK7J8k1tZmaqdKS8wD0ZwhpPyqTWd14Q/v
# xXSGOQfHMMvbBILiXPjSkfNw8yKJhZr+lW39uMz/kZRwZUmTcrdKAT3Q8PW+1DI9
# v3mNoFNXqtDlHcQ4nQ1TGk/RDO6oXDlTJwdnjoJT3Dopf8Jhl2etvZgVk2kOf4i5
# LmJbSVBr5FNOhJ6P4WL4OEQFOiXXquKdfuGTXIGGhkrW2WkPZulQwB6uO4Gv1wf2
# aj9bLDAFoPxFx2zYS6S/9L6rGeBMcTL9xHCfzyylM6YRjoscRdxXc67PClw71JUy
# regsoSQej0FpmsGx0uuAsDjCELleVIjeYzuQo5OYOP1BCg/5unLIrMgkyQw7COJI
# w+MIZq7IqvUTehU2yXpUGOqPkyDLBlib92dMRgqqG9r9UU7iL3BREbGW4ugW+GM2
# a9k8W9HjyDIIODsdXy1ugPHgjr/arHDAPgYosJMLvjTfdJDcIldAw6CbCcqhCDES
# UOjMVN9VS+716nY2AqvtEHxf47YwqmeRb+tg4SQ0dHLH5Pvfe2bk1sbZiiQpcelt
# Bd88yeBOpcmdzJVur2V4fEZXu5JB/qt/jeJeQa82hS3k93PWm/w=
# =Axhk
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 16 May 2022 07:46:37 AM PDT
# gpg: using RSA key 45F5C71B4A0CB7FB977A9FA90516331EBC5BFDE7
# gpg: Good signature from "Dr. David Alan Gilbert (RH2) <dgilbert@redhat.com>" [full]
* tag 'pull-migration-20220516a' of https://gitlab.com/dagrh/qemu:
multifd: Implement zero copy write in multifd migration (multifd-zero-copy)
multifd: Send header packet without flags if zero-copy-send is enabled
multifd: multifd_send_sync_main now returns negative on error
migration: Add migrate_use_tls() helper
migration: Add zero-copy-send parameter for QMP/HMP for Linux
QIOChannelSocket: Implement io_writev zero copy flag & io_flush for CONFIG_LINUX
QIOChannel: Add flags on io_writev and introduce io_flush callback
meson.build: Fix docker-test-build@alpine when including linux/errqueue.h
tests: ensure migration status isn't reported as failed
tests: add multifd migration tests of TLS with x509 credentials
tests: add multifd migration tests of TLS with PSK credentials
tests: convert multifd migration tests to use common helper
tests: convert XBZRLE migration test to use common helper
tests: add migration tests of TLS with x509 credentials
tests: add migration tests of TLS with PSK credentials
tests: add more helper macros for creating TLS x509 certs
tests: fix encoding of IP addresses in x509 certs
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Add property that allows zero-copy migration of memory pages
on the sending side, and also includes a helper function
migrate_use_zero_copy_send() to check if it's enabled.
No code is introduced to actually do the migration, but it allow
future implementations to enable/disable this feature.
On non-Linux builds this parameter is compiled-out.
Signed-off-by: Leonardo Bras <leobras@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20220513062836.965425-5-leobras@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Perfectly aligned things look pretty, but keeping them that
way as the schema evolves requires churn, and in some cases
newly-added lines are not aligned properly.
Overall, trying to align things is just not worth the trouble.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Message-Id: <20220503073737.84223-8-abologna@redhat.com>
Message-Id: <20220503073737.84223-9-abologna@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Two patches squashed together]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20220503073737.84223-5-abologna@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
This only affects readability. The generated documentation
doesn't change.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20220503073737.84223-4-abologna@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
The correct return type is ReplicationStatus, not
ReplicationResult.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Message-Id: <20220420153408.243584-3-abologna@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
The example shows {"command": ...}, which is wrong. Fix it to
{"execute": ...}.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20220401082028.3583296-1-armbru@redhat.com>
Reviewed-by: Victor Toso <victortoso@redhat.com>
The example output is missing the mandatory member @last-mode in the
return value. Fix it.
Signed-off-by: Victor Toso <victortoso@redhat.com>
Message-Id: <20220331190633.121077-7-victortoso@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Example output lacks mandatory member @timestamp. Provide it.
Example output is not properly formatted. Fixing it by:
- Adding '<-' to signalize it is receiving the data;
- Breaking lines similar to the other examples.
Signed-off-by: Victor Toso <victortoso@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-Id: <20220328140604.41484-8-victortoso@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
The examples for the snapshot-* and calc-dirty-rate commands document
that arguments for the commands are passed in a 'data' field.
This is wrong, passing them in a "data" field results in
the error:
{"error": {"class": "GenericError", "desc": "QMP input member 'data'
is unexpected"}}
Arguments are expected to be passed in an field called "arguments".
Replace "data" with "arguments" in the snapshot-* and calc-dirty-rate
command examples.
Signed-off-by: Fabian Holler <fabian.holler@simplesurance.de>
Message-Id: <20220222170116.63105-1-fabian.holler@simplesurance.de>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Provide information on the number of bytes copied in the pre-copy,
downtime and post-copy phases of migration.
Signed-off-by: David Edmondson <david.edmondson@oracle.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
commit f78d4ed701 has fixed qemu tag, making 'sample-pages' option tag
involved by accident, which introduced since 6.1 in commit 7afa08cd8f.
revert this line.
Signed-off-by: Hyman Huang(黄勇) <huangy81@chinatelecom.cn>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
The patchset merged in 71864eadd9 ("migration/dirtyrate:
introduce struct and adjust DirtyRateStat") was targeting
QEMU 6.1 but got merged later, so correct the tag for 6.2.
Signed-off-by: Hyman Huang(黄勇) <huangy81@chinatelecom.cn>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
introduce dirty-bitmap mode as the third method of calc-dirty-rate.
implement dirty-bitmap dirtyrate calculation, which can be used
to measuring dirtyrate in the absence of dirty-ring.
introduce "dirty_bitmap:-b" option in hmp calc_dirty_rate to
indicate dirty bitmap method should be used for calculation.
Signed-off-by: Hyman Huang(黄勇) <huangy81@chinatelecom.cn>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
use dirty ring feature to implement dirtyrate calculation.
introduce mode option in qmp calc_dirty_rate to specify what
method should be used when calculating dirtyrate, either
page-sampling or dirty-ring should be passed.
introduce "dirty_ring:-r" option in hmp calc_dirty_rate to
indicate dirty ring method should be used for calculation.
Signed-off-by: Hyman Huang(黄勇) <huangy81@chinatelecom.cn>
Message-Id: <7db445109bd18125ce8ec86816d14f6ab5de6a7d.1624040308.git.huangy81@chinatelecom.cn>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
introduce "DirtyRateMeasureMode" to specify what method should be
used to calculate dirty rate, introduce "DirtyRateVcpu" to store
dirty rate for each vcpu.
use union to store stat data of specific mode
Signed-off-by: Hyman Huang(黄勇) <huangy81@chinatelecom.cn>
Message-Id: <661c98c40f40e163aa58334337af8f3ddf41316a.1624040308.git.huangy81@chinatelecom.cn>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Add special feature 'unstable' everywhere the name starts with 'x-',
except for InputBarrierProperties member x-origin and
MemoryBackendProperties member x-use-canonical-path-for-ramblock-id,
because these two are actually stable.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Acked-by: John Snow <jsnow@redhat.com>
Message-Id: <20211028102520.747396-3-armbru@redhat.com>
Change the 'if' condition strings to be C-agnostic. It will accept
'[A-Z][A-Z0-9_]*' identifiers. This allows to express configuration
conditions in other languages (Rust or Python for ex) or other more
suitable forms.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Tested-by: John Snow <jsnow@redhat.com>
Message-Id: <20210804083105.97531-11-marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Rebased with semantic conflict in redefined-event.json]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
introduce optional sample-pages argument in calc-dirty-rate,
making sample page count per GB configurable so that more
accurate dirtyrate can be calculated.
Signed-off-by: Hyman Huang(黄勇) <huangy81@chinatelecom.cn>
Message-Id: <3103453a3b2796f929269c99a6ad81a9a7f1f405.1623027729.git.huangy81@chinatelecom.cn>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Wrapped a couple of long lines
Result @blocked is redundant. Unfortunately, we realized this too
close to the release to risk dropping it, so we deprecated it
instead, in commit e11ce6c06.
Since it was deprecated from the start, we can delete it without
the customary grace period. Do so.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20210429140424.2802929-1-armbru@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Result @blocked is true when and only when result @blocked-reasons is
present. It's always non-empty when present. @blocked is redundant.
It was introduced in commit 3af8554bd0 "migration: Add blocker
information", and has not been released. This gives us a chance to
fix the interface with minimal fuss.
Unfortunately, we're already too close to the release to risk dropping
it. Deprecate it instead.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-id: 20210420051907.891470-1-armbru@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The generic 'migrate_set_parameters' command handle all types of param.
Only the QMP commands were documented in the deprecations page, but the
rationale for deprecating applies equally to HMP, and the replacements
exist. Furthermore the HMP commands are just shims to the QMP commands,
so removing the latter breaks the former unless they get re-implemented.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Bitmap's source persistence is transported over the migration stream and
the destination mirrors it. In some cases the destination might want to
persist bitmaps which are not persistent on the source (e.g. the result
of merging bitmaps from a number of layers on the source when migrating
into a squashed image) but currently it would need to create another set
of persistent bitmaps and merge them.
This patch adds a 'transform' property to the alias map which allows
overriding the persistence of migrated bitmaps both on the source and
destination sides.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Message-Id: <b20afb675917b86f6359ac3591166ac6d4233573.1613150869.git.pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: grammar tweaks, drop dead conditional]
Signed-off-by: Eric Blake <eblake@redhat.com>
savevm, loadvm and delvm are some of the few HMP commands that have never
been converted to use QMP. The reasons for the lack of conversion are
that they blocked execution of the event thread, and the semantics
around choice of disks were ill-defined.
Despite this downside, however, libvirt and applications using libvirt
have used these commands for as long as QMP has existed, via the
"human-monitor-command" passthrough command. IOW, while it is clearly
desirable to be able to fix the problems, they are not a blocker to
all real world usage.
Meanwhile there is a need for other features which involve adding new
parameters to the commands. This is possible with HMP passthrough, but
it provides no reliable way for apps to introspect features, so using
QAPI modelling is highly desirable.
This patch thus introduces new snapshot-{load,save,delete} commands to
QMP that are intended to replace the old HMP counterparts. The new
commands are given different names, because they will be using the new
QEMU job framework and thus will have diverging behaviour from the HMP
originals. It would thus be misleading to keep the same name.
While this design uses the generic job framework, the current impl is
still blocking. The intention that the blocking problem is fixed later.
None the less applications using these new commands should assume that
they are asynchronous and thus wait for the job status change event to
indicate completion.
In addition to using the job framework, the new commands require the
caller to be explicit about all the block device nodes used in the
snapshot operations, with no built-in default heuristics in use.
Note that the existing "query-named-block-nodes" can be used to query
what snapshots currently exist for block nodes.
Acked-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20210204124834.774401-13-berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
dgilbert: removed tests for now, the output ordering isn't
deterministic
Modify query-migrate so that it has a flag indicating if outbound
migration is blocked, and if it is a list of reasons.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20210202135522.127380-2-dgilbert@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
73af8dd8d7 "migration: Make xbzrle_cache_size a migration
parameter" (v2.11.0) made the new parameter unsigned (QAPI type
'size', uint64_t in C). It neglected to update existing code, which
continues to use int64_t.
migrate_xbzrle_cache_size() returns the new parameter. Adjust its
return type.
QMP query-migrate-cache-size returns migrate_xbzrle_cache_size().
Adjust its return type.
migrate-set-parameters passes the new parameter to
xbzrle_cache_resize(). Adjust its parameter type.
xbzrle_cache_resize() passes it on to cache_init(). Adjust its
parameter type.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20210202141734.2488076-3-armbru@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Commit 741d4086c8 "migration: Use proper types in json" (v2.12.0)
switched MigrationParameters to narrower integer types, and removed
the simplified qmp_migrate_set_parameters()'s argument checking
accordingly.
Good idea, except qmp_migrate_set_parameters() takes
MigrateSetParameters, not MigrationParameters. Its job is updating
migrate_get_current()->parameters (which *is* of type
MigrationParameters) according to its argument. The integers now get
truncated silently. Reproducer:
---> {'execute': 'query-migrate-parameters'}
<--- {"return": {[...] "compress-threads": 8, [...]}}
---> {"execute": "migrate-set-parameters", "arguments": {"compress-threads": 257}}
<--- {"return": {}}
---> {'execute': 'query-migrate-parameters'}
<--- {"return": {[...] "compress-threads": 1, [...]}}
Fix by resynchronizing MigrateSetParameters with MigrationParameters.
Fixes: 741d4086c8
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20210202141734.2488076-2-armbru@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Add new capability to 'qapi/migration.json' schema.
Update migrate_caps_check() to validate enabled capability set
against introduced one. Perform checks for required kernel features
and compatibility with guest memory backends.
Signed-off-by: Andrey Gruzdev <andrey.gruzdev@virtuozzo.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20210129101407.103458-2-andrey.gruzdev@virtuozzo.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
We use x.y most of the time, and x.y.0 sometimes. Normalize for
consistency.
Reported-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20201118064158.3359056-1-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Added amount of bytes transferred to the VM at destination by all VFIO
devices
Signed-off-by: Kirti Wankhede <kwankhede@nvidia.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Restricting xen-set-global-dirty-log and xen-load-devices-state
commands migration.json pulls slightly less QAPI-generated code
into user-mode and tools.
Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20201012121536.3381997-6-philmd@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Make dirty_rate field optional, present dirty rate only when querying
the rate has completed.
The qmp results is shown as follow:
@unstarted:
{"return":{"status":"unstarted","start-time":0,"calc-time":0},"id":"libvirt-12"}
@measuring:
{"return":{"status":"measuring","start-time":102931,"calc-time":1},"id":"libvirt-85"}
@measured:
{"return":{"status":"measured","dirty-rate":4,"start-time":150146,"calc-time":1},"id":"libvirt-15"}
Signed-off-by: Chuan Zheng <zhengchuan@huawei.com>
Reviewed-by: David Edmondson <david.edmondson@oracle.com>
Message-Id: <1601350938-128320-3-git-send-email-zhengchuan@huawei.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
In commit 26ec4e53f2 and similar commits we fixed the indentation
for doc comments in our qapi json files to follow a new stricter
standard for indentation, which permits only:
@arg: description line 1
description line 2
or:
@arg:
line 1
line 2
but because the script updates that enforce this are not yet in the
tree we have had a steady trickle of subsequent changes which didn't
follow the new rules.
Fix the latest round of mis-indented doc comments.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20200925162316.21205-2-peter.maydell@linaro.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Updated for commit 4c437254b8 and a83e24ba1a]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Implement qmp_cal_dirty_rate()/qmp_get_dirty_rate() function which could be called
Signed-off-by: Chuan Zheng <zhengchuan@huawei.com>
Message-Id: <1600237327-33618-12-git-send-email-zhengchuan@huawei.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
atomic function fixup
Wording fixup in migration.json based on Eric's review
add DirtyRateStatus to denote calculating status.
Signed-off-by: Chuan Zheng <zhengchuan@huawei.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Li Qiang <liq3ea@gmail.com>
Message-Id: <1600237327-33618-3-git-send-email-zhengchuan@huawei.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
atomic name fixup
