Commit Graph

15 Commits

Author SHA1 Message Date
Tiwei Bie
44866521bd vhost-user: support registering external host notifiers
This patch introduces VHOST_USER_PROTOCOL_F_HOST_NOTIFIER.
With this feature negotiated, vhost-user backend can register
memory region based host notifiers. And it will allow the guest
driver in the VM to notify the hardware accelerator at the
vhost-user backend directly.

Signed-off-by: Tiwei Bie <tiwei.bie@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-05-24 21:14:11 +03:00
Tiwei Bie
5f57fbeaaf vhost-user: allow slave to send fds via slave channel
Introduce VHOST_USER_PROTOCOL_F_SLAVE_SEND_FD protocol
feature to allow slave to send at most 8 descriptors
in each message to master via ancillary data using the
slave channel.

Suggested-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Tiwei Bie <tiwei.bie@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-05-24 21:14:10 +03:00
Maxime Coquelin
1c3e5a2617 vhost-user: back SET/GET_CONFIG requests with a protocol feature
Without a dedicated protocol feature, QEMU cannot know whether
the backend can handle VHOST_USER_SET_CONFIG and
VHOST_USER_GET_CONFIG messages.

This patch adds a protocol feature that is only advertised by
QEMU if the device implements the config ops. Vhost user init
fails if the device support the feature but the backend doesn't.

The backend should only send VHOST_USER_SLAVE_CONFIG_CHANGE_MSG
requests if the protocol feature has been negotiated.

Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Changpeng Liu <changpeng.liu@intel.com>
2018-04-09 17:35:46 +03:00
Dr. David Alan Gilbert
c639187e33 vhost-user: Add VHOST_USER_POSTCOPY_END message
This message is sent just before the end of postcopy to get the
client to stop using userfault since we wont respond to any more
requests.  It should close userfaultfd so that any other pages
get mapped to the backing file automatically by the kernel, since
at this point we know we've received everything.

Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-03-20 16:40:37 +02:00
Dr. David Alan Gilbert
9bb3801994 vhost+postcopy: Send address back to qemu
We need a better way, but at the moment we need the address of the
mappings sent back to qemu so it can interpret the messages on the
userfaultfd it reads.

This is done as a 3 stage set:
   QEMU -> client
      set_mem_table

   mmap stuff, get addresses

   client -> qemu
       here are the addresses

   qemu -> client
       OK - now you can use them

That ensures that qemu has registered the new addresses in it's
userfault code before the client starts accessing them.

Note: We don't ask for the default 'ack' reply since we've got our own.

Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-03-20 05:03:28 +02:00
Dr. David Alan Gilbert
6864a7b5ac vhost+postcopy: Transmit 'listen' to slave
Notify the vhost-user slave on reception of the 'postcopy-listen'
event from the source.

Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-03-20 05:03:28 +02:00
Dr. David Alan Gilbert
d3dff7a5a1 vhost-user: Add 'VHOST_USER_POSTCOPY_ADVISE' message
Wire up a notifier to send a VHOST_USER_POSTCOPY_ADVISE
message on an incoming advise.

Later patches will fill in the behaviour/contents of the
message.

Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-03-20 05:03:27 +02:00
Dr. David Alan Gilbert
9ccbfe14dd postcopy: Add vhost-user flag for postcopy and check it
Add a vhost feature flag for postcopy support, and
use the postcopy notifier to check it before allowing postcopy.

Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-03-20 05:03:27 +02:00
Gonglei
efbfeb8180 cryptodev-vhost-user: add crypto session handler
Introduce two vhost-user meassges: VHOST_USER_CREATE_CRYPTO_SESSION
and VHOST_USER_CLOSE_CRYPTO_SESSION. At this point, the QEMU side
support crypto operation in cryptodev host-user backend.

Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: Longpeng(Mike) <longpeng2@huawei.com>
Signed-off-by: Jay Zhou <jianjay.zhou@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-03-01 18:26:17 +02:00
Maxime Coquelin
7de22778e1 vhost-user: fix multiple queue specification
The number of queues supported by the slave is queried with
message VHOST_USER_GET_QUEUE_NUM, not with message
VHOST_USER_GET_PROTOCOL_FEATURES.

Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-01-18 21:52:38 +02:00
Changpeng Liu
4c3e257b5e vhost-user: add new vhost user messages to support virtio config space
Add VHOST_USER_GET_CONFIG/VHOST_USER_SET_CONFIG messages which can be
used for live migration of vhost user devices, also vhost user devices
can benefit from the messages to get/set virtio config space from/to the
I/O target. For the purpose to support virtio config space change,
VHOST_USER_SLAVE_CONFIG_CHANGE_MSG message is added as the event notifier
in case virtio config space change in the slave I/O target.

Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-01-18 21:52:37 +02:00
Stefan Hajnoczi
c3d331d28f vhost-user: document memory accesses
The vhost-user protocol specification does not define "guest address"
and "user address".  It does not explain how to access memory given such
addresses.

This patch explains how memory access works, including the IOTLB.

Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Maxime Coquelin <maxime.coquelin@redhat.com>
Cc: Wei Wang <wei.w.wang@intel.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Maxime Coquelin <maxime.coquelin@redhat.com>
2017-12-22 01:42:03 +02:00
Stefan Hajnoczi
7722b1a78a vhost-user: fix indentation in protocol specification
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-12-22 01:42:03 +02:00
Felipe Franciosi
5df04f1762 vhost-user: fix legacy cross-endian configurations
Currently, vhost-user does not implement any means for notifying the
backend about guest endianess. This commit introduces a new message
called VHOST_USER_SET_VRING_ENDIAN which is analogous to the ioctl()
called VHOST_SET_VRING_ENDIAN used for kernel vhost backends. Such
message is necessary for backends supporting legacy (pre-1.0) virtio
devices running in big-endian guests.

Signed-off-by: Felipe Franciosi <felipe@nutanix.com>
Signed-off-by: Mike Cui <cui@nutanix.com>
2017-08-02 00:13:25 +03:00
Paolo Bonzini
d59157ea05 docs: create interop/ subdirectory
This is for the future interoperability & management guide.  It includes
the QAPI docs, including the automatically generated ones, other socket
protocols (vhost-user, VNC), and the qcow2 file format.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-06-15 11:18:39 +02:00