When dumping table blobs using rebuild-expected-aml.sh, table blobs from all
test variants are dumped regardless of whether there are any actual changes to
the tables or not. This creates lot of new files for various test variants that
are not part of the git repository. This is because we do not check in all table
blobs for all test variants into the repository. Only those blobs for those
variants that are different from the generic test-variant agnostic blob are
checked in.
This change makes the test smarter by checking if at all there are any changes
in the tables from the checked-in gold master blobs and take actions
accordingly.
When there are no changes:
- No new table blobs would be written.
- Existing table blobs will be refreshed (git diff will show no changes).
When there are changes:
- New table blob files will be dumped.
- Existing table blobs will be refreshed (git diff will show that the files
changed, asl diff will show the actual changes).
When new tables are introduced:
- Zero byte empty file blobs for new tables as instructed in the header of
bios-tables-test.c will be regenerated to actual table blobs.
This would make analyzing changes to tables less confusing and there would
be no need to clean useless untracked files when there are no table changes.
CC: peter.maydell@linaro.org
Signed-off-by: Ani Sinha <anisinha@redhat.com>
Message-Id: <20231107044952.5461-1-anisinha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Acked-by: Igor Mammedov <imammedo@redhat.com>
This tests the commit 7298fd7de5 ("hw/smbios: Fix thread count in
type4").
In smbios_build_type_4_table() (hw/smbios/smbios.c), if the number of
threads in the socket is more than 255, then smbios type4 table encodes
threads per socket into the thread count2 field.
So for the topology in this case, there're the following considerations:
1. threads per socket should be more than 255 to ensure we could cover
the thread count2 field.
2. The original bug was that threads per socket was miscalculated, so
now we should configure as many topology levels as possible (multiple
dies, no module since x86 hasn't supported it) to cover more general
topology scenarios, to ensure that the threads per socket encoded in
the thread count2 field is correct.
3. For the more general topology, we should also add "cpus" (presented
threads for machine) and "maxcpus" (total threads for machine) to
make sure that configuring unpluged CPUs in smp (cpus < maxcpus)
does not affect the correctness of threads per socket for thread
count2 field.
Note we don't consider the topology with multiple sockets since this
topology would create too many vCPUs (more than 255 threads per socket
with at least 2 sockets, which may cause the failure "Number of
hotpluggable cpus requested (*) exceeds the maximum cpus supported by
KVM (*) socket_accept failed: Resource temporarily unavailable"), and
the calculation of threads per socket has already been covered by
"thread count" test case.
Based on these considerations, select the topology as the follow:
-smp cpus=210,maxcpus=260,dies=2,cores=65,threads=2
The expected thread count2 = threads per socket = threads (2)
* cores (65) * dies (2) = 260.
Suggested-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Message-Id: <20231023094635.1588282-16-zhao1.liu@linux.intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This tests the commit 7298fd7de5 ("hw/smbios: Fix thread count in
type4").
In smbios_build_type_4_table() (hw/smbios/smbios.c), if the number of
threads in the socket is not more than 255, then smbios type4 table
encodes threads per socket into the thread count field.
So for the topology in this case, there're the following considerations:
1. threads per socket should be not more than 255 to ensure we could
cover the thread count field.
2. The original bug was that threads per socket was miscalculated, so
now we should configure as many topology levels as possible (multiple
sockets & dies, no module since x86 hasn't supported it) to cover
more general topology scenarios, to ensure that the threads per
socket encoded in the thread count field is correct.
3. For the more general topology, we should also add "cpus" (presented
threads for machine) and "maxcpus" (total threads for machine) to
make sure that configuring unpluged CPUs in smp (cpus < maxcpus)
does not affect the correctness of threads per socket for thread
count field.
Based on these considerations, select the topology as the follow:
-smp cpus=15,maxcpus=54,sockets=2,dies=3,cores=3,threads=3
The expected thread count = threads per socket = threads (3) * cores (3)
* dies (3) = 27.
Suggested-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20231023094635.1588282-13-zhao1.liu@linux.intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The commit 196ea60a73 ("hw/smbios: Fix core count in type4") fixed
the miscalculation of cores per socket.
The original core count2 test (with the topology configured by
"-smp 275") didn't recognize that topology-related but because it just
created a special topology with only one socket and one die by default,
ignoring the effect of more topology levels (between socket and core) on
the cores per socket calculation.
So for the topology in this case, there're the following considerations:
1. cores per socket should be more than 255 to ensure we could cover
the core count2 field.
2. The original bug was that cores per socket was miscalculated, so now
we should include as many topology levels as possible (multiple
sockets or dies, no module since x86 hasn't supported it) to cover
more general topology scenarios, to ensure that the cores per socket
encoded in the core count2 field is correct.
Based on these considerations, select the topology with multiple dies:
-smp 260,dies=2,cores=130,threads=1
Note, here we doesn't configure multiple sockets to avoid the error
("kvm_init_vcpu: kvm_get_vcpu failed (*): Too many open files") if user
uses the default ulimit seeting on his machine.
And the cores per socket calculation for multiple sockets has already
been covered by the core count test case, so that only multiple dies
configuration is enough.
The expected core count2 = cores per socket = cores (130) * dies (2) =
260.
Suggested-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Acked-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20231023094635.1588282-10-zhao1.liu@linux.intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This tests the commit 196ea60a73 ("hw/smbios: Fix core count in
type4").
In smbios_build_type_4_table() (hw/smbios/smbios.c), if the number of
cores in the socket is not more than 255, then smbios type4 table
encodes cores per socket into the core count field.
So for the topology in this case, there're the following considerations:
1. cores per socket should be not more than 255 to ensure we could cover
the core count field.
2. The original bug was that cores per socket was miscalculated, so now
we should include as many topology levels as possible (mutiple
sockets & dies, no module since x86 hasn't supported it) to cover
more general topology scenarios, to ensure that the cores per socket
encoded in the core count field is correct.
Based on these considerations, select the topology with multiple sockets
and dies:
-smp 54,sockets=2,dies=3,cores=3,threads=3
The expected core count = cores per socket = cores (3) * dies (3) = 9.
Suggested-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20231023094635.1588282-7-zhao1.liu@linux.intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This tests the commit d79a284a44 ("hw/smbios: Fix smbios_smp_sockets
calculation").
In smbios_get_tables() (hw/smbios/smbios.c), smbios type4 table is built
for each socket, so the count of type4 tables should be equal to the
number of sockets.
Thus for the topology in this case, there're the following considerations:
1. The topology should include multiple sockets to ensure smbios could
create type4 tables for each socket.
2. In addition to sockets, for the more general topology, we should also
configure as many topology levels as possible (multiple dies, no
module since x86 hasn't supported it), to ensure that smbios is able
to exclude the effect of other topology levels to create the type4
tables only for sockets.
3. The original miscalculation bug also misused "smp.cpus", so it's
necessary to configure "cpus" (presented threads for machine) and
"maxcpus" (total threads for machine) as well to make sure that
configuring unpluged CPUs in smp (cpus < maxcpus) does not affect
the correctness of the count of type4 tables.
Based on these considerations, select the topology as the follow:
-smp cpus=100,maxcpus=120,sockets=5,dies=2,cores=4,threads=3
The expected count of type4 tables = sockets (5).
Suggested-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20231023094635.1588282-4-zhao1.liu@linux.intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
seabios starts to make the placement of the 64bit mmio window
depend on the physical address space. Run the testcase with
a fixed processor on tcg to avoid different results depending
on the host machine.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
32-bit x86 systems do not have a reserved memory for hole64. On those 32-bit
systems without PSE36 or PAE CPU features, hotplugging memory devices are not
supported by QEMU as QEMU always places hotplugged memory above 4 GiB boundary
which is beyond the physical address space of the processor. Linux guests also
does not support memory hotplug on those systems. Please see Linux
kernel commit b59d02ed08690 ("mm/memory_hotplug: disable the functionality
for 32b") for more details.
Therefore, the maximum limit of the guest physical address in the absence of
additional memory devices effectively coincides with the end of
"above 4G memory space" region for 32-bit x86 without PAE/PSE36. When users
configure additional memory devices, after properly accounting for the
additional device memory region to find the maximum value of the guest
physical address, the address will be outside the range of the processor's
physical address space.
This change adds improvements to take above into consideration.
For example, previously this was allowed:
$ ./qemu-system-x86_64 -cpu pentium -m size=10G
With this change now it is no longer allowed:
$ ./qemu-system-x86_64 -cpu pentium -m size=10G
qemu-system-x86_64: Address space limit 0xffffffff < 0x2bfffffff phys-bits too low (32)
However, the following are allowed since on both cases physical address
space of the processor is 36 bits:
$ ./qemu-system-x86_64 -cpu pentium2 -m size=10G
$ ./qemu-system-x86_64 -cpu pentium,pse36=on -m size=10G
For 32-bit, without PAE/PSE36, hotplugging additional memory is no longer allowed.
$ ./qemu-system-i386 -m size=1G,maxmem=3G,slots=2
qemu-system-i386: Address space limit 0xffffffff < 0x1ffffffff phys-bits too low (32)
$ ./qemu-system-i386 -machine q35 -m size=1G,maxmem=3G,slots=2
qemu-system-i386: Address space limit 0xffffffff < 0x1ffffffff phys-bits too low (32)
A new compatibility flag is introduced to make sure pc_max_used_gpa() keeps
returning the old value for machines 8.1 and older.
Therefore, the above is still allowed for older machine types in order to support
compatibility. Hence, the following still works:
$ ./qemu-system-i386 -machine pc-i440fx-8.1 -m size=1G,maxmem=3G,slots=2
$ ./qemu-system-i386 -machine pc-q35-8.1 -m size=1G,maxmem=3G,slots=2
Further, following is also allowed as with PSE36, the processor has 36-bit
address space:
$ ./qemu-system-i386 -cpu 486,pse36=on -m size=1G,maxmem=3G,slots=2
After calling CPUID with EAX=0x80000001, all AMD64 compliant processors
have the longmode-capable-bit turned on in the extended feature flags (bit 29)
in EDX. The absence of CPUID longmode can be used to differentiate between
32-bit and 64-bit processors and is the recommended approach. QEMU takes this
approach elsewhere (for example, please see x86_cpu_realizefn()), With
this change, pc_max_used_gpa() also uses the same method to detect 32-bit
processors.
Unit tests are modified to not run 32-bit x86 tests that use memory hotplug.
Suggested-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Ani Sinha <anisinha@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-Id: <20230922160413.165702-1-anisinha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
with some rewording in
tests/qemu-iotests/298
tests/qtest/fuzz/generic_fuzz.c
tests/unit/test-throttle.c
as suggested by Eric.
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Eric Blake <eblake@redhat.com>
The virtio-iommu device might be missing in the QEMU binary (e.g. in
downstream RHEL builds), so let's better check for its availability first
before using it.
Message-Id: <20230822164948.65187-1-thuth@redhat.com>
Acked-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
PCIE ports only have one slot, slot 0. Hence, non-zero slots are not available
for PCIE devices on PCIE root ports. Fix test_acpi_q35_tcg_no_acpi_hotplug()
so that the test does not use them.
Signed-off-by: Ani Sinha <anisinha@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20230705115925.5339-3-anisinha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The arm "virt" machine needs "virtio-blk-pci" for devices that get attached
via the "-cdrom" option. Since this is an optional device that might not
be available in the binary, we should check for the availability of this
device first before using it.
Message-Id: <20230525081016.1870364-3-thuth@redhat.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Thomas Huth <thuth@redhat.com>
This commit enables each CXL Type-3 device to contain one volatile
memory region and one persistent region.
Two new properties have been added to cxl-type3 device initialization:
[volatile-memdev] and [persistent-memdev]
The existing [memdev] property has been deprecated and will default the
memory region to a persistent memory region (although a user may assign
the region to a ram or file backed region). It cannot be used in
combination with the new [persistent-memdev] property.
Partitioning volatile memory from persistent memory is not yet supported.
Volatile memory is mapped at DPA(0x0), while Persistent memory is mapped
at DPA(vmem->size), per CXL Spec 8.2.9.8.2.0 - Get Partition Info.
Signed-off-by: Gregory Price <gregory.price@memverge.com>
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Reviewed-by: Fan Ni <fan.ni@samsung.com>
Tested-by: Fan Ni <fan.ni@samsung.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20230421160827.2227-4-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
It is possible to have a build with both TCG and KVM disabled due to
Xen requiring the i386 and x86_64 binaries to be present in an aarch64
host.
If we build with --disable-tcg on the aarch64 host, we will end-up
with a QEMU binary (x86) that does not support TCG nor KVM.
Skip tests that crash or hang in the above scenario. Do not include
any test cases if TCG and KVM are missing.
Make sure that calls to qtest_has_accel are placed after g_test_init
in similar fashion to commit ae4b01b349 ("tests: Ensure TAP version is
printed before other messages") to avoid TAP parsing errors.
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20230426180013.14814-9-farosas@suse.de
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Coverity complains that memset() writes over a const field. Use
an initializer instead, so that the const field is left to zero.
Tests that have to write the const field already use an initializer
for the whole struct, here I am choosing the smallest possible
patch (which is not that small already).
Cc: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20230302161543.286002-28-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20230302161543.286002-21-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Following corner case wasn't covered:
-device pcie-root-port,id=NO_HOTPLUG,hotplug=off
-device pcie-root-port,bus=NO_HOTPLUG
when intermediate root-port has explicitly disabled hotplug,
all hierarchy below it is not described anymore (used to be
described in 7.2)
So as result we see only NO_HOTPLUG root-port described
+ Device (S50)
+ {
+ Name (_ADR, 0x000A0000) // _ADR: Address
+ }
and no children nor notification chain for them are being composed.
Follow up patches will fix missing leaf root-port descriptor
and notification chain that should accompany it.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20230302161543.286002-7-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
test bridge AML generator with ACPI PCI hotplug disabled
(i.e. with native hotplug enabled/disabled per bridge/root port)
PS:
while at make sure that devices on pci-bridge are starting
from addr=1.0 as slot 0 is not available there and test
passes only because of a bug in ACPI hotplug that will be
fixed by follow up patch
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20230302161543.286002-4-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This reverts commit c471eb4f40.
which broke acpi tables test and rebuild due to skipping some tests
even thought none of devices tests depend on weren't disabled.
As result it leads to some expected tables not being updated,
merge conflicts and tests failure.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20230302161543.286002-2-imammedo@redhat.com>
Acked-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Do not include tests that require devices that are not available in
the QEMU build.
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20230208194700.11035-10-farosas@suse.de>
Signed-off-by: Thomas Huth <thuth@redhat.com>
We are facing the issues that our test logs in the gitlab CI are
too big (and thus cut off). The bios-tables-test is one of the few
qtests that prints many lines of output by default when running with
V=1, so it contributes to this problem. Almost all other qtests are
silent with V=1 and only print debug messages with V=2 and higher.
Thus let's change the bios-tables-test to behave more like the
other tests and only print the debug messages with V=2 (or higher).
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230118125132.1694469-1-thuth@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
to make sure that they are enumerated or ignored as expected
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20230112140312.3096331-26-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
hotplugged bridges should not be described in DSDT,
while it works on cold boot, some ACPPI PCI code
are invoked during reboot.
This patch will let us catch unexpected AML if hotplug
checks are broken.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20230112140312.3096331-17-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
with previous commit fixing malformed PCNT calls to hotplugged
bridges, it should be possible add coldplug/hotplug test when
describing PCI topology in DSDT without breeaking CI.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20230112140312.3096331-15-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
'use_uefi' is used for the flag is a part of 'test_data *data'
argument that is passed to the same functions, which
makes use_uefi argument redundant.
Drop it and use 'data::uefi_*' directly, instead.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20230112140312.3096331-7-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
add nested bridges/root-ports to pcihp tests, to make sure
follow up patches don't break nested enumeration of bridges
in DSDT.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20230112140312.3096331-5-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
no functional change
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20230112140312.3096331-3-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
* Rework and improvements of the EINTR handling by Nikita
* Deprecate the -no-hpet command line option
* Disable the qtests in the 32-bit Windows CI job again
* Some other misc fixes here and there
-----BEGIN PGP SIGNATURE-----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=D+Yw
-----END PGP SIGNATURE-----
Merge tag 'pull-request-2023-01-09' of https://gitlab.com/thuth/qemu into staging
* s390x header clean-ups from Philippe
* Rework and improvements of the EINTR handling by Nikita
* Deprecate the -no-hpet command line option
* Disable the qtests in the 32-bit Windows CI job again
* Some other misc fixes here and there
# gpg: Signature made Mon 09 Jan 2023 14:21:19 GMT
# gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5
# gpg: issuer "thuth@redhat.com"
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full]
# gpg: aka "Thomas Huth <thuth@redhat.com>" [full]
# gpg: aka "Thomas Huth <huth@tuxfamily.org>" [full]
# gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5
* tag 'pull-request-2023-01-09' of https://gitlab.com/thuth/qemu:
.gitlab-ci.d/windows: Do not run the qtests in the msys2-32bit job
error handling: Use RETRY_ON_EINTR() macro where applicable
Refactoring: refactor TFR() macro to RETRY_ON_EINTR()
docs/interop: Change the vnc-ledstate-Pseudo-encoding doc into .rst
i386: Deprecate the -no-hpet QEMU command line option
tests/qtest/bios-tables-test: Replace -no-hpet with hpet=off machine parameter
tests/readconfig: spice doesn't support unix socket on windows yet
target/s390x: Restrict sysemu/reset.h to system emulation
target/s390x/tcg/excp_helper: Restrict system headers to sysemu
target/s390x/tcg/misc_helper: Remove unused "memory.h" include
hw/s390x/pv: Restrict Protected Virtualization to sysemu
exec/memory: Expose memory_region_access_valid()
MAINTAINERS: Add MIPS-related docs and configs to the MIPS architecture section
tests/vm: Update get_default_jobs() to work on non-x86_64 non-KVM hosts
qemu-iotests/stream-under-throttle: do not shutdown QEMU
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We are going to deprecate (and finally remove later) the -no-hpet command
line option. Prepare the bios-tables-test by using the replacement hpet=off
machine parameter instead.
Message-Id: <20230109081205.116369-1-thuth@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Add test for aarch64's ACPI topology building for all the supported
levels.
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Yanan Wang <wangyanan55@huawei.com>
Tested-by: Yanan Wang <wangyanan55@huawei.com>
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Message-Id: <20221229065513.55652-6-yangyicong@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The new test is run with a large number of cpus and checks if the
core_count field in smbios_cpu_test (structure type 4) is correct.
Choose q35 as it allows to run with -smp > 255.
Signed-off-by: Julia Suvorova <jusual@redhat.com>
Message-Id: <20220731162141.178443-5-jusual@redhat.com>
Message-Id: <20221011111731.101412-5-jusual@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Introduce the 64-bit entry point. Since we no longer have a total
number of structures, stop checking for the new ones at the EOF
structure (type 127).
Signed-off-by: Julia Suvorova <jusual@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20220731162141.178443-3-jusual@redhat.com>
Message-Id: <20221011111731.101412-3-jusual@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
So we don't need to set anywhere else.
Signed-off-by: Juan Quintela <quintela@redhat.com>
[thuth: Drop changes in tests/qtest/fuzz/ since the fuzzers still need this]
Message-Id: <20220902165126.1482-2-quintela@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Single quotes in the arguments (oem_id='CRASH ') are not removed in
the Windows environment before it is passed to the QEMU executable.
The space in the argument causes the "-acpitable" option parser to
think that all of its parameters are done, hence it complains:
'-acpitable' requires one of 'data' or 'file'
Change to use double quotes which works fine on all platforms.
Also /dev/null does not work on win32, and nul should be used.
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20220925113032.1949844-39-bmeng.cn@gmail.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20220902173452.1904-4-quintela@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
No code change here, just move test around.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20220902173452.1904-3-quintela@redhat.com>
Reviewed-by: Ani Sinha <ani@anisinha.ca>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Every other test function is named:
test_acpi_<machine>_<test>()
Just make this test the same. Once there, rename "acpi/oem-fields" to
"acpi/piix4/oem-fields" so it is consistent with everything else.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20220902173452.1904-2-quintela@redhat.com>
Reviewed-by: Ani Sinha <ani@anisinha.ca>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
As backends/meson.build tells us, hostmem-file.c is only supported on
POSIX platforms, hence any test case that utilizes the memory backend
file should be guarded by CONFIG_POSIX too.
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20220824094029.1634519-19-bmeng.cn@gmail.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
OSK value is irrelevant for ACPI test case.
Supply fake OSK explicitly to prevent QEMU complaining about
invalid key when it fallbacks to default_osk.
Suggested-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20220728133713.1369596-1-imammedo@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Paolo Bonzini requested this change to simplify the ongoing
effort to allow machine setup entirely via RPC.
Includes shortening the command line form cxl-fixed-memory-window
to cxl-fmw as the command lines are extremely long even with this
change.
The json change is needed to ensure that there is
a CXLFixedMemoryWindowOptionsList even though the actual
element in the json is never used. Similar to existing
SgxEpcProperties.
Update qemu-options.hx to reflect that this is now a -machine
parameter. The bulk of -M / -machine parameters are documented
under machine, so use that in preference to M.
Update cxl-test and bios-tables-test to reflect new parameters.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Ben Widawsky <ben@bwidawsk.net>
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Message-Id: <20220608145440.26106-2-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <20220608135340.3304695-28-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <20220608135340.3304695-24-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The DSDT includes several CXL specific elements and the CEDT
table is only present if we enable CXL.
The test exercises all current functionality with several
CFMWS, CHBS structures in CEDT and ACPI0016/ACPI00017 and _OSC
entries in DSDT.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20220429144110.25167-38-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This change implements the test suite checks for the ERST table.
Signed-off-by: Eric DeVolder <eric.devolder@oracle.com>
Reviewed-by: Ani Sinha <ani@anisinha.ca>
Message-Id: <1643402289-22216-10-git-send-email-eric.devolder@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
